What type of change happens when the powder inside a firework is burned?

A.Freezing occurs from a chemical change.
B.Light is produced by a chemical change.
C.Rotting occurs from a chemical change.
D.Rust is produced by a chemical change.

Answers

Answer 1

Answer:

B light is produced by chemical change

Explanation:

im not the smartest but if you think about it, fireworks make bright lights. And what do they have: powders.

(but I still could wrong, sorry if I am)

Answer 2
B- because fireworks produce heat light and loud sounds all caused by chemicals. The only right choice would be B

Related Questions

You drive on Interstate 10 from San Antonio to Houston, half the time at 75 km/h and the other half at 106 km/h. On the way back you travel half the distance at 75 km/h and the other half at 106 km/h. What is your average speed (a) from San Antonio to Houston, (b) from Houston back to San Antonio, and (c) for the entire trip

Answers

Answer:

Explanation:

a ) from San Antonio to Houston let distance be d km .

Average speed = total distance / total time

time = distance / speed

Total time = (d / 2 x 75 ) +( d / 2 x 106 )

= .0067 d + .0047 d

= .0114 d

Average speed  = d / .0114 d = 87.72 km /h

b ) from Houston back to San Antonio

Total time = (d / 2 x 106 ) +( d / 2 x 75 )

= .0047 d + .0067 d

= .0114 d

Average speed  = d / .0114 d = 87.72 km /h

c )

For entire trip :

total distance = 2d

total time = 2 x .0114 d

Average speed  = 2 d / 2 x .0114 d

= 87.72 km /h .

A 20.0 N force is necessary to stretch a spring 0.500 m. What is the spring constant of this spring?

Answers

The spring constant : k = 40 N/m

Further explanation

Given

Force = 20 N

The displacement of the spring=x=0.5 m

Required

The spring constant = k

Solution

Hooke's Law

F = k.x

k = F/x

Input the value :

k = 20/0.5

k = 40 N/m

5. (Liquids Gases) have particles with enough energy to spread out
throughoutcontainer. *
A)Liquids
B)Gases

Answers

Answer:

b gases

Explanation:

this is because gases spread out through out the entire container because they have no definite shape and are always moving.

Gases is the correct answer :))

Take 47 points. Hurry Someone save me just look the picture ​

Answers

Answer:

suppose buying pizza for a work party leads to positive morale and to the work being done in half the time. Pizza is the independent variable, Work speed is the dependent variable, The mediator, the middle man without which there would be no connection, is positive morale. Denaturation, in biology, the process of modifying the molecular structure of a protein. Denaturation involves the breaking of many of the weak linkages, or bonds (e.g., hydrogen bonds), within a protein molecule that is responsible for the highly ordered structure of the protein in its natural (native) state.

Explanation:

hope this helps have a good rest of your day :) ❤

Explanation:

HW1. For example, suppose buying pizza for a work party leads to positive morale and to the work being done in half the time. Pizza is the independent variable, Work speed is the dependent variable, The mediator, the middle man without which there would be no connection, is positive morale.

HW2. The word denature means to render food unpleasant or dangerous to consume, it is denatured by adding a substance known as a denaturant. Aversive agents—primarily bitterants and pungent agents—are used to produce an unpleasant flavor.

Hope It Helps U

Please Mark As Brainl

Which two options are homogeneous mixtures?
A. Sand
B. A wet sponge
C. Liquid dishwashing soap
O D. Vinegar

Answers

Answer:

Liquid dishwashing soap

Vinegar

Physical science-current can be increased by...

Answers

i think it’s d
sry if not

Option 3.) Increasing the voltage across the wire.

I know that the other answers are incorrect because, for one thing, the more resistance in a substance, the less flow of the current there is. Also, using a longer wire doesn't change anything, it just makes a electrical current go on longer. Lastly decreasing the voltage would make the current decrease in the atoms that flow through it to power an object.

-R3TR0 Z3R0

A student drove to the university from her home and noted that the odometer reading of her car increased by 17.9 km. The trip took 26.6 min.
a) What was her average speed, in kilometers per hour?
b) IS she returned home by the same path 7 h 30 min after she left, what was her average speed and velocity for the entire trip?

Answers

Answer:

See calculation below

Explanation:

Average speed = Distance/Time

a) Given

Distance = 17.9km

Time = 26.6minutes

Time = 26.6/60 hr

Time = 0.443hr

Average speed  = 17.9/0.443

Average speed = 40.38km/hr

b) If she returned home by the same path 7 h 30 min after she left, the distance will be the same;

Distance = 17.9km

Time = 7.5hr

Average speed = 17.9/7.5

Average speed = 2.387km/hr

Velocity of the entire trip = 40.38km/hr + 2.387km/hr

Velocity of the entire trip = 42.77km/hr

Hence the velocity of the entire trip is 42.77km/hr

The spectrum of a star shows a set of dark absorption lines equivalent to the absorption lines of the Sun but with one exception: Every line appears at a slightly longer wavelength, shifted toward the red end of the spectrum. What conclusion can be drawn from this observation

Answers

Answer:

The shift in the emission spectra of the relative velocity between the star and our planet, is called the relativistic doppler effect

Explanation:

The absorption and emission spectra are measured differently, the emission spectrum is the spectrum emitted by the star and the absorption spectrum is the absorption of these lines by the gases of our atmosphere, this absorption occurs for relatively broad Δλ.

The shift in the emission spectra of the relative velocity between the star and our planet, is called the relativistic doppler effect and has a red shift if the star moves away from us.

           [tex]f_o = f_s \sqrt{\frac{1- v/c}{1 + v/c} }[/tex]

Which of the following statements are true?
a. By convention, the direction of a current is taken to be the direction of flow for negative charges.
b. When an electric field is applied to a conductor, the free electrons move only in the direction opposite the applied electric field.
c. Current is the total amount of charge that passes through a conductor's full cross section at any point per unit of time.
d. In order to maintain a steady flow of current in a conductor, a steady force must be maintained on the mobile charges.
e. In a circuit, current is delivered by the positive terminal of a battery, and it is used up by the time it returns to the negative terminal of the battery.

Answers

Answer:

A, C, D and E are the true statement about current flowing.

models are frequently used in science to assist in the understanding of complex information. Models can include items like a working volcano, and aquarium, or a stream table. What type of model are each of these items?

A) two dimensional
b) three dimensional
c) mental explanation
d) Computer simulation

Answers

B. Three dimensional I’m almost positive

Two people are playing tug-of-war. Due to their choice of footwear, theircoefficient of static friction is different. Participant 1 has a mass of 60 kg, acoefficient of static friction of 2.0, and can pull with a maximum force of1000 N. Participant 2 has a mass of 80 kg and a coefficient of staticfriction of 1.2, and can pull with a maximum force of 1200 N. Who wins?

Answers

Answer:

Participant 1 wins

Explanation:

Coefficient of static, μ = F/N, where F is the frictional force and N is the normal force.

The force exerted by each participant is the sum of the frictional force acting on each of them and the maximum force with which each participant pulls on the rope.

Frictional force, F =  μ * N

Normal force, N = mass * acceleration due to gravity, g

For Participant 1; μ = 2.0, mass = 60 kg, g = 9.8 m/s²

Frictional force = 2.0 * 60 * 9.8 = 1176 N

Total force = (1176 + 1000) = 2176 N

For Participant 2; μ = 1.2, mass = 80 kg, g = 9.8 m/s²

Frictional force = 1.2 * 80 * 9.8 = 940.8N

Total force = (940.8 + 1200) N = 2140.8 N

From the values obtained above, Participant 1 exerts more force than Participant 2, therefore, Participant 1 wins

Which type of wall would make the best soundproofing for room?
A.
1.0 centimeter thick glass
OB.
two layers of 0.5 centimeter thick glass with 0.5 centimeters of air between them
C.
two layers of 0.5 centimeter thick glass with 0.3 centimeters of vacuum between them
OD.
1.0 centimeter thick steel

Answers

Among the options given, the choice that would make the best soundproofing for a room is option C: two layers of 0.5 centimeter thick glass with 0.3 centimeters of vacuum between them.

Soundproofing is achieved by reducing the transmission of sound waves from one side of the wall to the other. In this case, the combination of two layers of glass with a vacuum between them helps to reduce sound transmission effectively.

Glass is a denser material compared to air or vacuum, so it naturally provides some sound insulation. Adding an extra layer of glass creates a barrier that helps to further dampen sound vibrations. The vacuum between the glass layers acts as an additional sound barrier, as sound waves have difficulty propagating through a vacuum due to the absence of a medium for transmission.

On the other hand, a single layer of 1.0 centimeter thick glass (option A) or two layers of 0.5 centimeter thick glass with 0.5 centimeters of air between them (option B) would provide some sound reduction but not as effective as the combination of glass layers with a vacuum in option C.

1.0 centimeter thick steel (option D) would have high density and mass, which could help with sound insulation to some extent. However, steel can still transmit vibrations and might not be as effective as the combination of glass layers with a vacuum in option C for soundproofing a room.

For more such questions on Soundproofing

https://brainly.com/question/30258610

#SPJ8

Explain why objects in water appear to be a different size then the same objects above the water.

Answers

Answer:

the answer is the third one since water reflects it

Explanation:

A traffic light consists of a horizontal member attached to a vertical support post. The horizontal member extends 7 m to the left of the support post and has a constant mass density of 15 kg/m. Each traffic light has mass of 10 kg, and the street sign has a mass of 4.5 kg. Make sure the connection between the horizontal member and the vertical support post is strong enough to withstand the forces exerted on the horizontal member. Calculate the effects of the forces resulting from the two traffic lights and the street sign on the horizontal member.

Answers

Answer:

τ = 539 N m

Explanation:

Let's use the rotational equilibrium relationship, where we set our reference system at the junction of the poles and the counterclockwise rotations we consider positive

               τ = Σ τ_i

the mass of the traffic lights is m₁ = 10 kg, the mass of the sign m₂ = 4.5kg and suppose the worst case all the elements connected at the end (x = 7 m)

               τ = 2 m₁  x + m₂ x + m₃ x / 2

we calculate the mass of the horizontal pole using the concept of linear density

               λ = m₃ / l

               m₃ = λ l

we substitute

                τ = (2m₁ + m₂) x + λ l x / 2

                τ = x (2m₁ + m₂ +λ l / 2)

                 

let's calculate

               τ = 7 (2 10 + 4.5 + 15 7/2)

               τ = 539 N m

therefore, this is the torque that the joint between the two posts must resist

A 80 N force is needed to slide a 50.0 kg box across a flat surface at a constant velocity. What is the coefficient of kinetic friction between the box and the floor

Answers

Answer:

0.16

Explanation:

Given data

Force F= 80N

Mass m= 50kg

Reaction R= Weight= mg= 50*9.81= 490.5N

We know that

F=UR

Substitute and solve of U

U=F/R

U= 80/490.5

U=0.16

Hence the coefficient of friction is 0.16

A 45.0-kg girl stands on a 13.0-kg wagon holding two 18.0-kg weights. She throws the weights horizontally off the back of the wagon at a speed of 6.5 m/s relative to herself . Assuming that the wagon was at rest initially, what is the speed of the girl relative to the ground after she throws both weights at the same time

Answers

Answer:

v = 4.0 m/s

Explanation:

Assuming no external forces acting during the instant that the girl throws the weights, total momentum must be conserved.Since all the masses at rest initially, the initial momentum must be zero.So, due to momentum must keep constant, final momentum must be zero too, as follows:

       [tex]p_{f} = m_{w} * v_{w} + m_{g+w} *v_{g+w} = 0 (1)[/tex]

Assuming the direction towards the back of the wagon as positive, and replacing the masses in (1), we can solve for vg, as follows:

       [tex]v_{g+w} =- \frac{m_{w} *v_{w}}{m_{g+w} } = - \frac{36.0kg *6.5m/s}{58.0kg } = -4.0m/s (2)[/tex]

This means that the girl (along with the wagon on she is standing) will move at a speed of 4.0 m/s in an opposite direction to the one she threw the weights.

PLEASE PLEASE PLEASE HELP

Answers

Answer:

just use y = mx + b to create an equation of the line in the graph.

then you can plug in 15 for x and then convert 1.5 hours into minutes and plug it in as well.

you dont even need to make an equation for a line. just add 0.2 for every 3 mins.

at 9, it's 0.6, so at 12 it would be 0.8, and then 15 it would be 1.0.

go again all way for 1. 5 hours.

Explanation:

the slope is 0.1/1.5 so you equation would be y = 0.1/1.5x

the slope is rise/run.

You want to see how your new belt buckle matches your new hat. Your eyes are 114 mm below the top of the hat and 800 mm above the buckle. You walk up to your mirror and notice that the mirror is exactly large enough and exactly in the right position for you see both the top of the hat and the buckle.
1. What is the position of the top edge of the mirror relative to your eyes?2. How tall is the mirror?

Answers

Answer:

[tex]x=0.057m[/tex]

[tex]h=0.457m[/tex]

Explanation:

From the question we are told that

Distance of eyes from the top of hat [tex]d_1=114mm[/tex]

Distance of eyes from buckle  [tex]d_2=800mm[/tex]

Generally position of mirror relative eyes x is mathematically given as

[tex]x=\frac{114}{2}[/tex]

[tex]x=57mm[/tex]

[tex]x=0.057m[/tex]

Generally the height of the mirror h is mathematically given as

[tex]h=\frac{(Buckle\ below\ the\ hat)+(Buckle\ below\ the\ hat)}{2}[/tex]

[tex]h=\frac{(114)+(800)}{2}[/tex]

[tex]h=457mm[/tex]

[tex]h=0.457m[/tex]

Does light travel faster in seawater or in fresh water? Does light travel faster in seawater or in fresh water? Light travels faster in seawater, because the index of refraction is smaller in seawater. Light travels faster in fresh water, because the index of refraction is smaller in fresh water. Light travels faster in fresh water, because the index of refraction is larger in fresh water. Light travels faster in seawater, because the index of refraction is larger in seawater.

Answers

No

because that is a light

The light travel faster in fresh water as compare to sea water.

When light goes from denser to rare medium the speed of light is increases.When light travel from rare to denser medium the speed of light is decreases.The reflective index of denser medium is more as compare to rare medium.The reflective index of sea water is more as compare to fresh water.

Hence, the light travel faster in fresh water as compare to sea water.

Learn more:

https://brainly.com/question/10769980

A hovercraft is being driven across a lake on a very windy day. The wind exerts a force of 5000 N north on the hovercraft. The propellers driving the hovercraft also exert a force.


What is the net force (to 3.s.f ) on the hovercraft when the force applied to the hovercraft by the propellers is: 10 000 N west

Answers

Answer:

The net force on the hovercraft is 11200 N.

Explanation:

Given;

force exerted on the hovercraft by wind, F₁ = 5000 N north

force exerted on the hovercraft by the propeller, F₂ = 10,000 N west

The net force on the hovercraft is calculated as;

[tex]F_{net} = \sqrt{F_1^2 + F_2^2} \\\\F_{net} = \sqrt{5000^2 + 10,000^2} \\\\F_{net} = 11180.34 \ N\\\\F_{net} = 11200 \ N \ (3.s.f)[/tex]

Therefore, the net force on the hovercraft is 11200 N.


Marlon is studying a crab population. He has a large batch of crabs that were captured in the ocean. He places a plastic tag on a leg of each crab and releases the entire batch back into the ocean. The tags
include a phone number that can be called it the crabs are caught. For each crab, Marion records the location he released the crab and the location that it was recaptured. What can Marion measure with
this data
А
the speed the crabs traveled
B
the velocity the crabs traveled
the acceleration of the crabs
D
the displacement of the crabs

Answers

First time I did it I got 2143658709

When an object falls, its:
A. PE increases and KE decreases.
B. PE does not change.
C. PE and KE both increase.
D. PE decreases and kE increases​

Answers

Answer:

Option D. is correct.

Explanation:

The object's mechanical energy refers to the sum of the potential and kinetic energies of the object. When an object falls, its potential energy (PE) decreases, and its kinetic energy (KE) increases. The increase in kinetic energy is exactly equal to the decrease in potential energy.

Option D. is correct.

A fox locates its prey under the snow by slight sounds rodents make. The fox then leaps straight into the air, and then burrows its nose into the snow to catch its meal. If a fox jumps up to a height of 79 cm, calculate (a) the speed at which the fox leaves the snow, and (b) how long the fox is in the air. Ignore air resistance.m/s:s:You throw a baseball directly upward at time t = 0 at an initial speed of 12.9 m/s. What is the maximum height the ball reaches above where it leaves your hand? At what times does the ball pass through half the maximum height? Ignore air resistance and take g = 9.80 m/s2.Maximum height:Earlier time at half maximum height:Later time at half maximum height:

Answers

Answer:

1.a) 3.93 m/s

 b) 0.80 s

2. a) 8.49 m

   b) 0.39 s

 

Explanation:

1. a) The speed at which the fox leaves the snow can be found as follows:

[tex] v_{f}^{2} = v_{0}^{2} - 2gH [/tex]

Where:

g: is the gravity = 9.80 m/s²

[tex]v_{f}[/tex]: is the final speed = 0 (at the maximum height)

[tex]v_{0}[/tex]: is the initial speed =?

H: is the maximum height = 79 cm = 0.79 m

[tex] v_{0} = \sqrt{2gH} = \sqrt{2*9.80 m/s^{2}*0.79 m} = 3.93 m/s [/tex]

Hence, the speed at which the fox leaves the snow is 3.93 m/s.

b) The time at which the fox reaches the maximum height is given by:

[tex]v_{f} = v_{0} - gt[/tex]

[tex]t = \frac{v_{0} - v_{f}}{g} = \frac{3.93 m/s}{9.80 m/s^{2}} = 0.40 s[/tex]

Now, the time of flight is:  

[tex] t_{v} = 2t = 2*0.40 s = 0.80 s [/tex]

2. a) The maximum height the ball reaches is:

[tex] H = \frac{v_{0}^{2} - v_{f}^{2}}{2g} = \frac{(12.9 m/s)^{2}}{2*9.80 m/s^{2}} = 8.49 m [/tex]

Then, the maximum height is 8.49 m.

b) The time at which the ball passes through half the maximum height is:

[tex]y_{f} = y_{0} + v_{0}t - \frac{1}{2}gt^{2}[/tex]

Taking y₀ = 0 and [tex]y_{f}[/tex] = 8.49/2 = 4.245 m we have:

[tex] 4.245 m -12.9m/s*t + \frac{1}{2}*9.80m/s^{2}*t^{2} = 0 [/tex]  

By solving the above quadratic equation we have:

t = 0.39 s

Therefore, the time at which the ball passes through half the maximum height when the ball is going up is 0.39 s.

I hope it helps you!                                                                                                      

During a phase change the temperature of a substance remains constant this is because during a phase heat changes the ____ energy of particles in a substance without changing their ____ energy

Answers

Answer:

Explanation:

individual and then net

hope that helps I could be wrong about this one though

An upward force of 32.6 N is applied via a string to lift a ball with a mass of 2.8 kg. (a) What is the gravitational force acting on the ball? (b) What is the net force acting upon the ball? (c) What is the acceleration of the ball?

Answers

Answer:

a) Fg = -27.4 N

b) Fnet = 5.2 N

c) a = 1.9 m/s2

Explanation:

a)

There are two forces acting on the ball, one directed upward (assuming this direction as positive, along the y-axis) which is the tension on the string (lifting force), and another aimed downward, which is the attractive force due to gravity.Applying the Newton's Universal Law of Gravitation to a mass close to the surface of the Earth (in this case the ball), we can take the acceleration due to gravity like a constant, that we call by convention g, equal to -9.8 m/s2.So, we can write the following expression for Fg:

       [tex]F_{g} = m*g = 2.8 kg*(-9.8m/s2) = -27.4 N (1)[/tex]

b)

The net force on the ball, will be just the difference between the lifting force (32.6 N) and the force due to gravity, Fg:

       [tex]F_{net} = T -F_{g} = 32.6 N - 27.4 N = 5.2 N (2)[/tex]

c)

According Newton's 2nd Law, the acceleration caused by a net force on a point mass (we can take the ball as one) is given by the following expression:

       [tex]a = \frac{F_{net} }{m} = \frac{5.2N}{2.8kg} = 1.9 m/s2 (3)[/tex]

Modify how could you charge the electric circuit shown below to allow lightbulb a to stay lit even if lightbulb b is removed from its base?

Answers

When a circuit is complete, or closed, electrons can flow from one end of a battery all the way around, through the wires, to the other end of the battery. Along its way, it will carry electrons to electrical objects that are connected to it – like the light bulb – and make them work!

The other name of eureka can

Answers

Answer:

I found it!

Explanation:

Answer:

Explanation:

displacement vessels

The can is filled to the top with water and the object placed in it. The volume of the object is equal to the volume of the water that is forced through the spout. Eureka cans are named after a scientist called Archimedes who first recorded this idea. They are sometimes also called displacement vessels.

Suppose two skiers (A and B) are racing. Assume a frictionless surface! They start from the top of a mountain at the same time, and glide down to the flat area below. Just before the finish line there is a ditch. The skiers can either go down into the ditch or take a flat bridge over the ditch. Both the bridge and the ditch are covered with frictionless snow. Skier A decides to go down into the ditch. Skier B decides to go over the bridge. . Which skier gets to the finish line first, or do they arrive at the same time?

a. Skier A (ditch) arrives first
b. Skier B (bridge) arrives first
c. The skiers arrive at the same time
d. Neither skier arrives at the finish line

Answers

Answer:

b. Skier B (bridge) arrives first

Explanation:

This is because, skier B continues along the bring with the same velocity he started with before moving over the bridge and since the bridge is frictionless, he losses no kinetic energy and his speed is constant.

Whereas, skier A losses kinetic energy as he goes into the ditch. This is due to his change in potential energy. He thus emerges from the ditch with lesser kinetic energy than skier B and thus a slower speed.

Therefore, skier B arrives first since he moves at a constant speed.

If the mass of a basketball is 18 times that of a tennis mass, can they ever have the same momentum? Explain your answer

Answers

Answer:

Yes

Explanation:

Yes. The momentum is the same when the speed of the tennis ball is 18 times greater than the speed of the basketball and the velocities of both objects are in the same direction.

4. Taylor Swift pushes Kanye West,
headfirst fearless, off a high dive with and
initial speed of 6m/s. If the platform is 20m
high, what is Kanye's impact velocity with
the water? (velocity and angle)

Answers

The velocity would be 3.33333

Explanation: to find velocity you divide distance with time! (Hope this helps)
Other Questions
who knows about -ar verbs Pls help ASAP will mark brainleist. The Enlightenment philosophers inspired later political revolution because of their support for 6. Who are the Laestygones? What do they do to Odysseus and his men? (2pts) Can anyone translate this salanghae,wil neon nawa gyeolhon hae Help with all 3 ASAP Help please i have no idea how to do this please help Arial14+BI U A16A new Apple Watch costs $369. If the watch ison sale for 15% off, what is the sale price? Create a scale model to illustrate the equation 5b + 2 = 22. What is the value of b and why? PLEASE HELP ME IT WILL BE GREAT IF U DO this is my question please answer it square root of n^2, if n 0 The half life of a radioactive kind of cesium is 30 years. How much will be left after 120 years, if you start with 960 grams of it What volume (in L) of water vapor will beproduced from the reaction of 24.65 L of oxygen?2C2H6(g) + 702(g) 4CO2(g) + 6H2O(9) What charge does a covalent bond have? What are the two functions of the nucleus? can someone please help me do this equation! Danah is planting a second strawberry patch andwants it to have an area of exactly 1 square meter.Which of the following could be the width and lengthof its borders? Circle the letter for all that apply.A 2-meter wide and -meters longB {-meter wide and meters long-meter wide andmeters longD meter wide and a meters longIf I find the area ofeach differentshape strawberrypatch, I can figureout which optionshave an area of1 square meter.Look at problem 5. If Danah wants her strawberrypatch to be exactly 1 square meter, can the length ofher strawberry patch be greater than 1 meter? Explain. What is the perimeter of ABCD? I need assistance in this math A dot plot is shown.