A karyotype after meiosis would consist of haploid cells with half the number of chromosomes as the original karyotype, reflecting the reduction in chromosome number due to the separation of homologous chromosomes during meiosis.
A karyotype represents the complete set of chromosomes in an individual's cells. During meiosis, the process of cell division that produces gametes (sperm and eggs), the number of chromosomes is reduced by half. This reduction is accomplished through two consecutive divisions, known as meiosis I and meiosis II.
After meiosis, the resulting karyotype would consist of haploid cells, meaning they have half the number of chromosomes as the original karyotype. In humans, for example, a typical karyotype includes 46 chromosomes in diploid cells. After meiosis, the resulting karyotype would contain 23 chromosomes, as each homologous pair of chromosomes separates during meiosis I. These haploid cells are the gametes, which are then used for sexual reproduction.
Learn more about Meiosis here: brainly.com/question/29383386
#SPJ11
Which statement is always true about a reversible chemical reaction?
A.
The concentration of reactants is higher than that of the products.
B.
The products can form reactants, and the reactants can form products.
C.
The concentrations of reactants and products are not constant.
D.
The concentration of the products is higher than that of the reactants.
Answer: b
Explanation:
The gas arsine, AsH3, decomposes as follows: In an experiment at a certain temperature, pure AsH3(g) was placed in an empty, rigid, sealed flask at a pressure of 392.0 torr. After 48 hours the pressure in the flask was observed to be constant at 488.0 torr. a. Calculate the equilibrium pressure of H2(g). b. Calculate Kp for this reaction
The equilibrium pressure of [tex]H_{2}[/tex] is 288 torr. and [tex]K_{p}[/tex] for this reaction is 0.786 atm.
from the reaction:- [tex]2AsH_{3}[/tex] ⇄ [tex]2As + 3H_{2}[/tex]
initial concentration 392 torr. 0
at equilibrium. 392 - [tex]2x[/tex]. [tex]3x[/tex]
and the final pressure in the flask = 488 torr.
Hence,
[tex]( 392 - 2x ) + 3x = 488\\ x = 488-392\\x = 96 torr.[/tex]
The partial pressure of [tex]H_{2}[/tex] is 3 × 96 = 288 torr.
and [tex]AsH_{3}[/tex] is 392 - ( 2 × 96 ) = 392 - 192 = 200 torr.
Now, to find [tex]K_{p}[/tex] for this reaction, we will use [tex]K_{p} = \frac{(P_{H_{2} })^{2} }{( P_{AsH_{3} } )^{2}}[/tex]
putting all the values, we get,
[tex]K_{p} = \frac{(288)^{3} }{(200)^{2} }[/tex]
= 597.1968 torr.
= 0.786 atm. ( 1 atm = 760 torr. )
what do you mean by equilibrium?
Equilibrium in chemistry is the phase that exists when a chemical reaction and its opposite reaction happen at the same rates. This word's Latin origin dates back to the prefix aequi-, which means equal, and lbra, that indicates scale or balance.
Learn more about equilibrium reaction here:-
https://brainly.com/question/15118952
#SPJ4
If the concentration of the acid is represented by the variable x, then what should you use to represent the concentration of the base so you can solve for the concentrations needed to make a 0.10 M buffer
Concentration of base in terms of x is 0.1 - x.
What is Concentration?The amount of solute that has dissolved in a specific amount of solvent or solution is measured as solution concentration. A concentrated solution is one that has a significant amount of dissolved solute in it. A diluted solution is one that has a little amount of dissolved solute in it.
A 0.10M buffer solution mean the sum of concentration of acid and base in the buffer is 0.1M
if A is acid nd B is its conjugate base
[A] + [B] = 0.1
[B] = 0.1 - [A]
if [A] or acid concentration is x, [B] or base concentration is
[B] = 0.1 - x
to know more about Concentration go to - https://brainly.com/question/13872928
#SPJ4
Which of these is an example of investigating an intensive property?
Oweighing sand in a bag
Omeasuring the length of wire
O determining if a rock is magnetic
Orecording the volume of water in a cylinder
An example of investigating an intensive property is determining if a rock is magnetic. That is option C.
What is intensive property?Intensive property is defined as the property of a substance that doesn't rely on the amount of the substance.
Examples of Intensive property include:
colour, melting point, boiling point, andMagnetic propertiesLearn more about magnetic properties here:
https://brainly.com/question/14411049
#SPJ1
Which sample contains the greatest number of atoms?
(a) 27.2 g cr
(b) 55.1 g ti
(c) 205 g pb
Answer:
b option is correct
Explanation:
Read the chemical equation.
n2 + 3h2
2nh3
using the volume ratio, determine how many liters of nh3 is produced if 3.6 liters of
h2 reacts with an excess of n2, if all measurements are taken at the same
temperature and pressure? (5 points)
1) 5.4 liters
2) 2.4 liters
3) 1.8 liters
4) 1.2 liters
The volume of [tex]NH_3[/tex] that will be produced is 2.4 liters. The correct option is 2.
Volume ratioThe equation of the reaction goes thus: [tex]N_2 + 3H_2 --- > 2NH_3[/tex]
The ratio of H2 to NH3 is 3:2.
Thus, with 3.6 L of H2, the volume of NH3 that will be produced is:
2/3 x 3.6 = 2.4 liters.
More on volume ratios can be found here: https://brainly.com/question/7071992
#SPJ1
Entropy A. has a strong odor B. is a measure of correlation between numeric variables C. is used to calculate information gain D. is a measure of information gain
Correct option:
Entropy is used to calculate information gain.
What is entropy?
Entropy is the measure of data's uncertainty or randomness; the greater the randomness, the higher the entropy. Entropy is used by information gain to make choices. Information will increase if the entropy decreases.Decision trees and random forests leverage information gained to determine the appropriate split. Therefore, the split will be better and the entropy will lower the more information gained.Information gain is calculated by comparing the entropy of a dataset before and after a split.Entropy is a way to quantify data uncertainty. The goal is to maximize information gain while minimizing entropy. The method prioritizes the feature with the most information, which is utilized to train the model.Entropy is actually used when you use information gain.Learn more about entropy here,
https://brainly.com/question/22145368
#SPJ4
What's partial negative charge and partial positive charge in an atom? How it's obtained?
Explanation:
However if the two atoms have different affinities for electrons, or electronegativities, then the electrons are more likely to be found closer to the more electronegative atom. In this case, the more electronegative atom gains a partial negative charge, while the less electronegative atom becomes partially positive.
hope it helps please mark me brainlist if you are satisfied with the answer
Which compound has both covalent and ionic bonds? pls give the explanation thx ：）
A NH3
B Na2SO4
C CH3COOH
D NaCl
Answer:
B.) Na₂SO₄
Explanation:
Covalent bonds are bonds which involve electrons being shared between two atoms. These bonds only occur between nonmetals.
Ionic bonds are bonds which involve electrons being given or taken by two atoms. These bonds form between a metal and a nonmetal.
NH₃ contains nitrogen and hydrogen, two nonmetals. Therefore, this molecule only contains covalent bonds.
Na₂SO₄ has both covalent and ionic bonds. The covalent bonds are found within the polyatomic ion, SO₄²⁻. Sulfur and oxygen are both nonmetals, thus covalently combining. The ionic bond forms between the Na⁺ and SO₄²⁻. Sodium (Na) is a metal which wishes to give up electrons to have a complete octet. SO₄²⁻ serves as the anion which it bonds with.
CH₃COOH contains hydrogen, carbon, and oxygen. All of these are nonmetals, thus the only bonds formed are covalent.
NaCl contains sodium, a metal, and chlorine, a nonmetal. Therefore, this compound is held together by an ionic bond.
How much energy will a sample of aluminum gain when it is warmed from 306 K to 419 K? The specific heat capacity of aluminum is 0.897 J/g.K,
and the mass of the sample is 5.00 g.
Answer:
506.81J
Explanation:
H = MC(T1 - T0)
H = 5 × 0.897 × (419 - 306)
H = 5 × 0.897 × 113
H = 506.81 J
As per specific heat of aluminium ,506.81 J of energy is gained by the sample.
What is specific heat capacity?Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.
It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.
It is given by the formula ,
Q=mcΔT
For the given example, Q=energy
m=mass=5 g, C=0.897 J/g.K
T₂=419 K
T₁=306 K
substituting in the formula ,Q=5×0.897(419-306)=506.81 J.
Thus, 506.81 J of energy is required.
Learn more about specific heat capacity,here:
https://brainly.com/question/1747943
#SPJ2
This graph illustrates the course of a chemical reaction with and without an enzyme. While the products and reactants are the same, the presence of an enzyme changes the amount of energy required for the reaction to begi
Red curve shows the course of the reaction in the presence of an enzyme. Line a represents the activation energy for that reaction.
Hence, Option (iv) is correct answer.
What is Activation Energy ?Activation energy is the minimum energy required an input of energy to initiate the reaction.
[tex]k = Ae^{\frac{-E_a}{RT}}[/tex]
where,
k = rate constant
A = pre-exponential factor
Eₐ = activation energy
R = universal gas constant
T = absolute temperature (in K)
Activation energy = Threshold energy - Energy of colliding molecule.
Thus from the above conclusion we can say that Red curve shows the course of the reaction in the presence of an enzyme. Line a represents the activation energy for that reaction.
Hence, Option (iv) is correct answer.
Learn more about the Activation Energy here: https://brainly.com/question/1380484
#SPJ4
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Question: This graph illustrates the course of a chemical reaction with and without an enzyme. While the products and reactants are the same, the presence of an enzyme changes the amount of energy required for the reaction to begin.
Part A - Interpreting the graph
Which curve shows the course of the reaction in the presence of an enzyme--the black curve or the red curve? Which line represents the activation energy for that reaction--a, b, or c?
(i) a black curve; line a
(ii) black curve; line b
(iii) black curve; line c
(iv) red curve; line a
(v) red curve; line b
(vi) red curve; line c
A known amount of heat is transferred to a sample of iron and the iron raises its temperature by 4.0 degrees Celsius. What would be the temperature increase if the same amount of heat was transferred to the same mass of water
To learn more about transfer of heat visit:
https://brainly.com/question/13433948
#SPJ4
chegg You add a sprinkle of sugar (non-volatile solute) to a beaker of water; the vapor pressure of the solution, compared to the vapor pressure of the pure solvent before the sugar was added, will:
If a non-volatile sugar is added to water , the vapor pressure of liquid will tend to decreases and this reduction of vapor pressure is said to be proportional to the numbers of mole fraction of solute that was added to it.
What occurs when a non volatile solute is added to a solution?In the case above, the vapor pressure of the solution is known to be lowered if compared to the vapor pressure of the pure solution.
Therefore if a non-volatile solute is said to be place or added to a pure solution such as water, the vapor pressure of the solution will be reduced than that of the pure solution.
Hence, the statement that If a non-volatile sugar is added to water , the vapor pressure of liquid will tend to decreases and this reduction of vapor pressure is said to be proportional to the numbers of mole fraction of solute that was added to it is correct.
Learn more about non-volatile solute from
https://brainly.com/question/1408304
#SPJ1
Solid silver bromide and aqueous potassium nitrate are produced by the reaction of aqueous silver nitrate and aqueous potassium bromide .
For the mentioned reaction, the balanced chemical equation is:
KBr (aq) + AgNO3 (s) → KNO3 (aq) + AgBr(s)
The number written in front of the ion, atoms, and molecules in a chemical reaction so that each of the elements on both the sides of reactants and products of the equation gets balanced is known as the stoichiometric coefficient.
What happen when aqueous silver nitrate reacts with aqueous potassium bromide ?From the mentioned balanced equation, the stoichiometric coefficient before KBr is 1, AgNO3 is 1, KNO3 is 1, as well as before AgBr is also 1. Thus, it is clear that 1 mole of potassium bromide reacts with 1 mole of silver nitrate to produce 1 mole of potassium nitrate and 1 mole of silver bromide.
Learn more about Silver nitrate reacts with aqueous potassium bromide here:
https://brainly.com/question/17178254
#SPJ4
Which statement is true of the following reaction?
H₂ + O₂H+ + 0²-
O It is balanced for oxidation state and for number of atoms.
O It is not balanced for oxidation state or for number of atoms.
O It is not balanced for oxidation state but is balanced for number of atoms.
OIt is balanced for oxidation state but is not balanced for number of atoms.
Answer: the answer is not c
Explanation: I don't know the correct answer, but I took the test and I know it is not c
Answer:
b is the answer
Explanation:
bc i said so
Why are pure liquids and solids not included in the reaction quotient or the equilibrium constant expression for a given heterogeneous reaction
Pure liquids and solids at the equilibrium stage:
Pure solids and pure liquids are not included in expressions for the equilibrium constant of heterogeneous equilibria since their concentrations are constant across time. Therefore, including it in our equilibrium expression is not significant.
Equilibrium expression:
When a certain chemical reaction is in equilibrium, the rates of the forward and backward reactions are equal, which means that there is no net change in the concentrations of the reactants and products and that the reaction mixture's composition does not change.
The concentration of solid and liquid:
Solid or liquid concentration,
= No. of Moles/ Volume in L
= Mass/(Volume × molar mass)
= Density/ Molar mass
Pure solids and liquids have constant densities and molar masses at a constant temperature.
Because of this, they have constant molar concentrations, which means that they are not considered in the equilibrium constant for a heterogeneous reaction.
Learn more about the pure solids, liquids, and heterogenous mixture here,
https://brainly.com/question/1811148
#SPJ4
Which type of bond is not backed by any specific collateral, such as land or equipment?
a) secured bonds
b) debenture bonds
c) equity bond
d) mortgage bonds
Answer:
A
Explanation:
looking at both equity
and mortgage bond fixtures
I would rather say secured bond fit into not being backed by any specific collateral
5. Why is it important to incubate microbe(s) isolated from humans at 37 degrees celsius?
Despite the fact that viruses and ambient bacteria found indoors could both be mesophiles, at 37 degrees Celsius, the temperature of the human body, pathogens would develop more quickly than environmental strains.
A virus would be an infectious submicroscopic creature that only reproduces inside of live cells.
Although bacteria may survive at higher and lower temperatures than humans, they thrive in an environment which really is warm, wet, protein-rich, and pH neutral as well as slightly acidic.
Therefore, Despite the fact that viruses and ambient bacteria found indoors could both be mesophiles, at 37 degrees Celsius, the temperature of the human body, pathogens would develop more quickly than environmental strains.
To know more about viruses and bacteria
https://brainly.com/question/8008968?
#SPJ4
If your client receives a letter from SilverScript requesting proof of Creditable Coverage, and the client has already submitted proof of creditable coverage with the enrollment application, they can ignore the letter.
If your client receives a letter from SilverScript requesting proof of Creditable Coverage, they can ignore the letter is a false statement
What is Creditable coverage?Creditable coverage is known to be a form of an health insurance, that consist of prescription drug and also other kinds of health benefit plan that is known to meets the minimum amount of qualifications.
Note that the types of creditable coverage plans are group and individual health plans, student health plans, and others.
It is not right to ignore any letter sent to you concerning the case above as it may be vital and as such, the statement of If your client receives a letter from SilverScript requesting proof of Creditable Coverage, and the client has already submitted proof of creditable coverage with the enrollment application, they can ignore the letter is a wrong/false statement.
Learn more about Creditable Coverage from
https://brainly.com/question/14547867
#SPJ1
When the total pressure inside a tennis ball reaches 1013 kPa, the tennis ball will burst. If the ball
originally has a pressure of 405 kPa at room temperature (20°C), at what temperature will the ball burst?
(submit your work)
Answer:
50.0 °C
Explanation:
If all other variables are being held constant, you can find the temperature using Guy-Lussac's Law. The equation looks like this:
P₁ / T₁ = P₂ / T₂
In this equation, "P₁" and "T₁" represent the initial pressure and temperature. "P₂" and "T₂" represent the final pressure and temperature. You can find the missing temperature (T₂) by plugging the given values into the equation and simplifying.
P₁ = 405 pKa P₂ = 1013 pKa
T₁ = 20 °C T₂ = ? °C
P₁ / T₁ = P₂ / T₂ <----- Guy-Lussac's Law
405 pKa / 20 °C = 1013 pKa / T₂ <----- Insert values
20.25 = 1013 pKa / T₂ <----- Divide 20 from 405
20.25 x T₂ = 1013 pKa <----- Multiply both sides by T₂
T₂ = 50.0 °C <----- Divide both sides by 20.25
A certain reaction has an activation energy of 54.0 kJ/mol. As the temperature is increased from 22C to a higher temperature, the rate constant increases by a factor of 7.00. Calculate the higher temperature.
The higher temperature will be:
As the temperature is increased from 22°C to a higher temperature, the rate constant increases by a factor of 7.00. The final temperature will be 271.74K.
What is the activation energy?
Activation energy is defined as the extra energy provided required to activate the molecules to start reacting and forming intermediate and later product.
Arrhenius equations given the relation rate constant and activation energy.
[tex]LnK=Ae^{-\frac{E_a}{RT}\\\\[/tex]
Where,
K= Rate constant
A= Pre exponential factor
[tex]E_a=[/tex] Activation energy
When two rate constants are given [tex]K_1\,[/tex] and [tex]\,K_2[/tex]
[tex]ln\frac{K_2}{K_1}=\frac{E_a}{R}(\frac{1}{T_2}-\frac{1}{T_1})[/tex]
Given,
[tex]T_1[/tex] = 22°C = 295K
Rate constant[tex](K_1)[/tex] increases by a factor of 7,i.e, [tex]K_2=7K_1[/tex]
[tex]E_a[/tex]= 54 kJ/mole = 54000 J/mole
R= 8.314 [tex]J\,mol^{-1}K^{-1}[/tex]
Putting the values,
[tex]ln\frac{K_2}{K_1}=\frac{E_a}{R}(\frac{1}{T_2}-\frac{1}{T_1})[/tex]
ln 7 x 8.31454000 = (1/[tex]T_{2}\\[/tex] - 1/295)
0.299 x [tex]10^{-3}[/tex] + 1/295 = 1/[tex]T_{2}[/tex]
0.00368 = 1/[tex]T_{2}[/tex]
[tex]T_{2}[/tex] = 1/0.00368
[tex]T_{2}[/tex] = 271.74 K
Therefore,
The increase in temperature will change from 295K to 271.74K.
Learn more about Arrhenius equation of activation here,
https://brainly.com/question/14977272
#SPJ4
What is the relationship between evaporation rate and molecular size of alcohols?
Answer:
larger the intermolecular forces in a compound, the slower its evaporation rate
Explanation:
socratic
The removal of one or more electrons from a neutral atom results in and
Answer:
The removal of one or more electrons from a neutral atom results in a cation.
Explanation:
When you remove electrons from a neutral atom, the atom becomes more positive. Electrons have a negative charge and the protons inside of the nucleus have a positive charge. When electrons are removed, the positive charges from the protons outweigh the negative charges. This results in a positively charged atom, called a cation.
Two balloons, one containing 1.54 L hydrogen gas and the other containing 0.72 L of
helium gas, are at the same pressure and temperature conditions. If the second balloon
contains 0.100 mol of helium, then the mass of hydrogen gas in the first balloon is:
A. 0.43 g
B. 0.22 g
C. 0.094 g
D. 0.047 g
Answer:
A.) 0.43 g
Explanation:
Before you can calculate the mass, you need to find the moles. You can do this by using Avogadro's Law:
V₁ / n₁ = V₂ / n₂
In this equation, "V₁" and "n₁" represent the first balloon's volume and mole value. "V₂" and "n₂" represent the second balloon's volume and mole value. Since you are searching for the first balloon's mole value, you can plug the other values into the equation and simplify to find n₁.
V₁ = 1.54 L V₂ = 0.72 L
n₁ = ? moles n₂ = 0.100 moles
V₁ / n₁ = V₂ / n₂ <----- Avogadro's Law
1.54 L / n₁ = 0.72 L / 0.100 moles <----- Insert values
1.54 L / n₁ = 7.2 <----- Simplify right side
1.54 L = 7.2 x n₁ <----- Multiply both sides by n₁
0.214 = n₁ <----- Divide both sides by 7.2
Now, you can find the mass using the molar mass of the gas. Remember, hydrogen exists as a diatomic molecule.
Atomic Mass (H₂): 2(1.008 g/mol)
Molar Mass (H₂): 2.016 g/mol
0.214 moles He 2.016 g
-------------------------- x ----------------- = 0.43 g H₂
1 mole
A positive correlation ______ a causal link, and a negative correlation ______ a causal link.
A. does not necessarily indicate, does not necessarily indicate
B. does not necessarily indicate, always indicates
C. always indicates, does not necessarily indicate
D. always indicates, always indicates
A positive correlation does not necessarily indicate a causal link, and a negative correlation does not necessarily indicate a causal link; option A.
What is a correlation?A correlation is a relationship that exists between two variables.
A positive correlation indicates a direct relationship while a negative correlation shows an inverse relationship.
However, a positive correlation does not necessarily indicate a causal link, and a negative correlation does not necessarily indicate a causal link.
In conclusion, a correlation indicates a relationship between two values.
Learn more about correlation at: https://brainly.com/question/4219149
#SPJ1
A 50.7 g meta l ro d is hea'ted t o 92. 3 degree s Celsius. I t is adde d t o a calorimete r fille d wit h 25.O g o f wate r a t 23. 0 degree s Celsius. Wha t is th e fina l temperatur e o f th e mixture
Answer:
Can you be more clear with your question
Which energy profile best shows that the formation of NO2 requires 33.1
kJ/mol?
The energy profile representing the reaction of the formation of NO2 is energy profile B; option D.
What is an energy profile diagram?An energy profile diagram is a diagram which illustrates in the form of a graph the energy changes that occur as reactant molecules react to form products.
An energy profile has energy of the molecules plotted on the y-axis and the reaction pathway or the reaction progress on the x-axis.
The shape of an energy profile depends on whether the reaction is an endothermic or exothermic reaction.
An exothermic reaction will have the energy of reactants higher than that of products, whereas an endothermic reaction will have the energy of products higher than the reactants.
The formation of NO2 is an endothermic reaction which requires 33.1kJ/mol of energy to complete.
Therefore, the energy profile representing the reaction is energy profile B.
In conclusion, an energy profile diagram shows energy changes that occur in a reaction graphically.
Learn more about energy profile at: https://brainly.com/question/1041883
#SPJ1
You want to control the temperature of an enzyme-controlled reaction that is taking place inside a flask. What is the most effective way to keep the reaction at a controlled and steady temperature?
Use of thermostat is the most effective way to keep the reaction at a control temperature.
What is the most effective way to keep the reaction in control?The reaction takes place in a thermostat is the most effective way to keep the reaction at a controlled and steady temperature because thermostat regulates the temperature of that solution which is placed in it. If the temperature goes higher then the extra heat is released from the system.
So we can conclude that use of thermostat is the most effective way to keep the reaction at a control temperature.
Learn more about temperature here: https://brainly.com/question/24746268
#SPJ1
What is the energy of a photon emitted with a wavelength of 448 nm?
According to the Planck-Einstein relation, the energy of a photon emitted with a wavelength of 448 nm is 4.44 × 10⁻¹⁹ J.
What is a photon?A photon is a particle representing a quantum of light or other electromagnetic radiation. A photon carries energy proportional to the radiation frequency but has zero rest mass.
Step 1. Calculate the frequency of the photon.A photon is emitted with a wavelength (λ) of 448 nm. Given the speed of light (c) is 3.00 × 10⁸ m/s, we can calculate the frequency (ν) of the photon using the following expression.
ν = c/λ
ν = (3.00 × 10⁸ m/s ) / (4.48 × 10⁻⁷ m) = 6.70 × 10¹⁴ s⁻¹
Step 2. Calculate the energy (E) of the photon.We will use the Planck-Einstein relation, being Planck's constant h = 6.63 × 10⁻³⁴ J.s.
E = h × ν
E = (6.63 × 10⁻³⁴ J.s) × (6.70 × 10¹⁴ s⁻¹) = 4.44 × 10⁻¹⁹ J
According to the Planck-Einstein relation, the energy of a photon emitted with a wavelength of 448 nm is 4.44 × 10⁻¹⁹ J.
Learn more about photons here: https://brainly.com/question/15946945
#SPJ1
Cream of tartar creates a white-purple flame when burned. What can you hypothesize is a component of the cream
Potassium can be a component of the cream.
Why does potassium show white-purple flame when burned?An element's presence can be determined using a flame test. The potassium in cream of tartar is what gives it its white-purple color.
Low ionization enthalpy elements allow the flame to display color. Due to low ionization enthalpy, when an element is heated, its valence electrons are quickly excited to higher orbits and emit light as they return to their original orbit. Salts of potassium emit a white-purple color when ignited. The cream of tartar's chemical formula is KC₄H₅O₆.
Learn more about flame test here:
https://brainly.com/question/22043426
#SPJ4