When highway engineers build a road in a mountainous area, they insert drainage pipes into the slopes alongside the road. Explain why.

The manufacture of integrated circuits requires the deposition of several layers made of various materials. Physical vapor deposition (PVD) and chemical vapor deposition are the two most significant deposition techniques (CVD).

Layers of metal (conducting) and dielectric (insulating) materials are created by deposition procedures and utilized to construct semiconductor devices. Several procedures are used, depending on the kind of material and structure being built.

The most significant technology in the production of semiconductors has supplanted lithography. The three types of deposition are CVD, PVD, and epitaxy. As the most significant deposition technology, CVD has supplanted PVD.

To know more about integrated circuits visit:-

brainly.com/question/13019820

#SPJ4

Electric grills today are more energy-efficient than they have ever been. A modest indoor electric grill uses 1,400 watts of power on average in the US and costs $0.17 per hour. It costs $5.11 per month to utilize it for an hour a day.

Electric grills typically need 1800 watts. Depending on the manufacturer, size, and other factors, the wattage of your device may vary.

The ability to grill inside is the best perk of having an electric grill. There is nothing prohibiting you from setting it up in your home because they don't emit smoke and are very safe to use.

To know more about electric visit:-

https://brainly.com/question/25086863

#SPJ4

Since the technician is running a network above a dropped ceiling that is also used for ventilation. The option that is need is  option 2: Plenum-rated CAT-6a

When running a network cable above a dropped ceiling that is also used for ventilation, it is important to use a cable that is both twisted pair and capable of Gigabit Ethernet speeds. In this scenario, the best option is to use plenum-rated CAT-6a cable.

Therefore, Plenum-rated cables have a special jacket that is made of low-smoke, zero-halogen materials and are specifically designed for use in air handling spaces, such as the dropped ceiling in this scenario. They are also capable of supporting Gigabit Ethernet speeds, which is important for high-speed network applications.

Learn more about ventilation from

https://brainly.com/question/1121893

#SPJ1

The heat flux at the surface of the wire is determined by using the equation Q = 2kW/(πroL). Using the given values of 2kW, 0.06 in, and 16 in, the heat flux is calculated to be approximately 22.1 W/in2.

The heat flux at the surface of a resistance wire is the amount of heat that is transferred through the wire per unit area. It is calculated by using the equation Q = 2kW/(πroL), where Q is the heat flux, 2kW is the power of the wire, π is the mathematical constant, ro is the radius of the wire, and L is the length of the wire. In this example, the resistance wire has a power of 2kW, a radius of 0.06 in, and a length of 16 in. Plugging these values into the equation provides the heat flux of 22.1 W/in2. The heat flux is an important factor to consider when designing a space heating system. It gives an indication of how much heat is being transferred from the wire and how it will affect the environment. Knowing the heat flux can help ensure that the system is designed correctly and that it is able to provide the desired amount of heat.

Learn more about equation here

https://brainly.com/question/29657992

#SPJ4

The statement that is considered an advantage to using the Express framework in Node.js application development provides an easy and flexible routing system that can work as per HTTP Method and URL. The correct option is b.

A Node. js workspace platform called a node framework enables developers to create both the front end and the back end of an application using JavaScript.

Therefore, the correct option is b. provides an easy and flexible routing system that can work as per HTTP Method and URL.

To learn more about the framework in nodes, refer to the link:

https://brainly.com/question/14295038

#SPJ1

The Southern Association of Colleges and Schools Commission on Colleges (SACSCOC) has granted accreditation to Central Carolina Technical College so that it may grant associate degrees. Private college is Central College.

Central Carolina Technical College is a public, two-year institution in South Carolina committed to promoting a healthy teaching and learning environment for students in the counties of Clarendon, Kershaw, Lee, and Sumter. Pick from more than 50 programs of study there.

Attending a technical college is not only a wise decision for graduating seniors, but it is also suggested for those looking to advance their existing careers or change careers altogether.

To know more about technical college visit:-

brainly.com/question/20837775

#SPJ4

The info definition is utilized to ensure that data dictionary is working effectively. This file verifies the accuracy of the database's relationships, field fill-in accuracy, and formatting details like field size.

Most people agree that the definitive source for information about the English language is indeed the Oxford English Lexicon (OED). It is the best resource available for learning the origins, definitions, and pronunciation of more than 600,000 words used today and throughout English-speaking history.

ye.commastmastmas, and (OED) The Oxford English Lexicon (OED) is usually considered as the most extensive record of a English language ever created. Unlike standard dictionaries of language, which solely describe words by terms of

To know more about dictionary visit:

https://brainly.com/question/13352889

#SPJ4

The right response is A, which most accurately defines "code" as a set of guidelines and directives expressed in a particular programming language that facilitates communication with machines.

A method is a body of code that has a name and may be called (invoked) at any time during the execution of a programme by using the method's name. Consider a method as a little programme that operates on data and frequently outputs a value. In computer programming, a remark is an explanation or annotation in the source code of a computer programme that is understandable by programmers. Each method has its own name. Compilers and interpreters often disregard them since they were introduced to make the source code simpler for humans to comprehend.

To learn more about programming click on the link below:

brainly.com/question/11023419

#SPJ4

A chatbot is a type of AI system that understands written and spoken words and can interact with humans using language.

A language AI system can differentiate between different spoken or written languages through the use of natural language processing (NLP) and machine learning algorithms. NLP allows the system to analyze the structure and context of written and spoken language, and identify patterns and features that are unique to different languages. The machine learning algorithms then use this data to train the system to recognize and understand different languages, and adapt its response accordingly. For example, the system may be programmed to recognize different dialects or accents within a language, or to identify specific phrases or vocabulary that are commonly used in a particular region or culture. The system can also be designed to learn and improve over time through ongoing feedback and input from human users.

To know more about AI System visit:

https://brainly.com/question/30364563

#SPJ4

The AI system that can comprehend written and spoken words and communicate with people using language is known as the natural language processing (NLP) system.

What is NLP?

Natural Language Processing (NLP) is a subfield of artificial intelligence that focuses on processing and analyzing human language data. The ultimate goal of natural language processing is to enable computers to comprehend, interpret, and create human language in a way that is both meaningful and valuable to humans. This field includes a wide range of technologies that enable computers to interact with people using language, including text-to-speech, voice recognition, machine translation, and speech-to-text.

To know more about NLP:

https://brainly.com/question/29857170

#SPJ11

An increase in the speed of the airflow leaving the fan, which makes the air feel cooler than the air entering the fan.

A ceiling fan doesn't actually lower the overall temperature of a room, but it can certainly make a room cooler. Ceiling fans work primarily through the cooling effect of wind. Basically, air moving over the skin helps sweat evaporate faster.

Vents are closed or obstructed If you have closed the vents or furniture or upholstery has blocked the vents, proper airflow is disturbed. This can definitely cause some rooms in your home to be warmer than others, while putting a strain on your HVAC system.

To know more about airflow leaving the fan visit :-

https://brainly.com/question/29278287

#SPJ4

The impact factor of a journal is a measure of the frequency with which the average article in the journal has been cited in a given period of time.

What is impact factor?

The impact factor is a metric that measures the average number of citations received in a particular year by articles published in aduring the two preceding years. It is commonly used as a way of evaluating the relative importance of a journal within its field, with higher impact factors indicating that articles published in the journal are more frequently cited by other researchers.The impact factor is calculated by dividing the number of citations received in a given year by the total number of articles published in the journal during the two preceding years.

The impact factor of a journal is a measure of the frequency with which the average article in the journal has been cited in a given period of time. The impact factor of ACS Biomaterials Science & Engineering can be found on the Web of Science, a database maintained by Clarivate Analytics.

As of my training data, the most recent impact factor of ACS Biomaterials Science & Engineering was 5.143, according to the 2020 Journal Citation Reports released in 2021. This means that, on average, articles published in this in the two preceding years were cited 5.143 times in 2020.

It's important to note that impact factor is just one of many factors that can be used to evaluate a journal, and it should not be used as the sole criterion for choosing where to publish. Other factors, such as the scope of the, the quality of its editorial process, and the reputation of its publisher, should also be considered when evaluating

Learn more about impact factor click here:

https://brainly.com/question/28429620

#SPJ4

Two of the greatest materials for cannabis grinders are aluminum and zinc. Aluminum is available in a range of shapes and sizes, is lightweight, and is inexpensive. Aluminum grinders are also lightweight and inexpensive, but zinc grinders are far more robust.

Metal grinders are stronger, more stable, and more consistent. They are made to durable and can withstand a variety of dry herb consistencies.

Use a metal grinder if you're seeking for a straightforward solution. For grinding homegrown marijuana, many individuals prefer a typical aluminum three-chamber grinder. It is strong, simple to maintain, barely detectable, and portable. Moreover, the grinder has a magnetic cover that aids in maintaining its tight closure.

To know more about materials visit:-

https://brainly.com/question/13044444

#SPJ4

I would emphasize that a design-build approach provides early input from all team members, including the client, ensuring essential tasks are coordinated from the start.

This approach also ensures maximum transparency as only one team works on all phases of the project.

Additionally, the customer will be working with a unified team of professionals who are all on the same page, reducing miscommunication and increasing efficiency.

Unlike a low-bid approach, where the contractor team may be separate from the rest of the team, a design-build approach ensures the contractor team's undivided attention, improving quality control and reducing delays.

Read more about sales pitch here:

https://brainly.com/question/25703682

#SPJ1

With regard to Rural Land Survey:

A. Image 1 shows more irregular patterns because of GPS survey, while image 2 shows regular patterns due to a standard survey.

B. A disadvantage of the land survey method in Oxfordshire is the cost and time required for the process.

C. Image 1 reflects social equality because it shows a more diverse use of land and better distribution of resources.

D. Intensive agricultural practices can increase nutrient run-off and affect water quality in the St. Lawrence River valley.

E. Changing the image scale to 1:1,000 would increase the level of detail and help identify smaller land use patterns.

Rural land survey is crucial because it provides accurate and detailed information about land use, property ownership, and other aspects of rural areas.

This information is essential for a wide range of activities, including land planning, resource management, and environmental conservation. Accurate surveys can also help to prevent land disputes, provide information for land taxation, and enable effective monitoring of land use changes over time.

Learn more about Rural Land Survey:

https://brainly.com/question/14442402

#SPJ1

The input impedance of an oscilloscope is a complex quantity that can be represented by the resistance in parallel with the capacitance between the  input terminal and ground of the scope.

You can check this by measuring the resistance between the probe tip and ground with a multimeter (20MΩ scale). Of course, this only applies to DC. At higher frequencies, the resistances of the capacitors.

Oscilloscopes can be classified in the same way - analog and digital types. Unlike an analog oscilloscope, a digital oscilloscope uses an analog-to-digital converter (ADC) to convert the measured voltage into digital information.

To know more about oscilloscope visit :-

https://brainly.com/question/30634091

#SPJ4

The ABA reversal design is a type of single-case experimental design used to evaluate the effects of an intervention or treatment on behavior. It involves measuring a behavior (A) during a baseline phase, introducing an intervention (B), and then measuring the behavior again (A) during a second baseline phase.

Example: Using ABA reversal design to evaluate the effect of a mindfulness meditation app on reducing test anxiety in college students.

A reversal design is an experimental design used in research that involves repeated measures and alternating treatment conditions. In this design, the treatment is alternated with a control or baseline condition, and the effects of each condition are measured. The reversal design allows researchers to assess the effectiveness of a treatment and compare it to a baseline or control condition. The key difference between a reversal design and other experimental designs is that it involves the repeated application and withdrawal of a treatment, allowing for a direct comparison of the effects of the treatment and control conditions.

To know more about Intervention visit:

https://brainly.com/question/30159682

#SPJ4

The relation is r = [(GMpt^2)/(4π^2)]^(1/3). Using the given values for Europa's orbit, the acceleration of gravity at the surface of Jupiter is 24.8 m/s^2.

The correct relation is:

r = (GMpT²/4π²)^(1/3)

where r is the radius of the Moon's orbit, Mp is the mass of the planet, T is the time required by the Moon to complete one full revolution about the planet, G is the gravitational constant, and π is the mathematical constant pi.

To determine the acceleration of gravity at the surface of the planet Jupiter, we need to use the following formula:

g = GMp/R²

where g is the acceleration of gravity at the surface of the planet, R is the radius of the planet, and Mp is the mass of the planet.

Substituting the given values into the first formula, we have:

r = (GMpT²/4π²)^(1/3)

670.9 x 10^3 km = [(6.67 x 10^-11 N(m/kg)^2)(1.898 x 10^27 kg)(3.551 days)^2/(4π²)]^(1/3)

Solving for Mp, we get:

Mp = (4π²r³)/(GT²)

Mp = (4π²(670.9 x 10^3 km)^3)/(6.67 x 10^-11 N(m/kg)^2(3.551 days)^2)

Mp = 4.799 x 10^26 kg

Substituting the values of Mp and R into the second formula, we have:

g = GMp/R²

g = (6.67 x 10^-11 N(m/kg)^2)(4.799 x 10^26 kg)/(71,492,000 m)^2

g = 24.8 m/s²

Therefore, the acceleration of gravity at the surface of the planet Jupiter is 24.8 m/s². The correct option is: "The acceleration of gravity at the surface of the planet Jupiter is Jupiter = 24.8 m/s²."

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ4

(a) The liquidity index (LI) of a soil is defined as:

LI = (w - LL) / (PL)

where w is the natural water content of the soil, LL is the liquid limit, and PL is the plasticity index.

Substituting the given values, we get:

LI = (0.45 - 0.65) / (0.35) = -0.57

The negative value of the liquidity index indicates that the soil is currently in a dense, compact state.

The consistency index (CI) of soil is defined as:

CI = (LL - 20) / (PL)

Substituting the given values, we get:

CI = (65 - 20) / (35) = 1.57

(b) Using the Unified Soil Classification System (USCS), we can classify this soil based on its liquid limit, plasticity index, and particle size distribution.

First, based on the given liquid limit of 65%, this soil falls in the "high plasticity" (CH) group.

Next, we need to determine the soil's classification based on its particle size distribution.

Based on the given information, we can classify this soil as CH (high plasticity clay), and because no particle size information was given we can classify this soil as CL (low plasticity clay) based on its high plasticity index. The complete classification is therefore CH-CL.

Liquidity index (LI) is a measure of the consistency and compressibility of a soil. It is defined as the ratio of the difference between the natural water content of the soil and the liquid limit of the soil, to the plasticity index of the soil.

LI = (w - LL) / PL

where w is the natural water content of the soil, LL is the liquid limit of the soil, and PL is the plasticity index of the soil.

The liquidity index value indicates the degree of saturation of the soil, with positive values indicating that the soil is saturated and negative values indicating that the soil is unsaturated. If the liquidity index is zero, it indicates that the soil is at the exact liquid limit.

To know more about plasticity index visit: https://brainly.com/question/19414870

#SPJ4

Drainage divides are the lines separating two watersheds. The point on a surface where water flows out of a space is known as the exit or pour point. It is located at the watershed's lowest point.

Watershed Delineation: Using topographic maps in accordance with the fundamental tenet that water flows downward is a typical way of finding and outlining the borders of watersheds. The physical characteristics of the terrain, such as hills, valleys, basins, ridges, and channels, are depicted on a topographic map. By determining the flow direction and utilizing it in the Watershed tool, watersheds may be defined from a DEM. A raster reflecting the flow direction must first be made using the Flow Direction tool in order to identify the contributing area.

To learn more about watershed's click on the link below:

brainly.com/question/13313239

#SPJ4

Bob comes to the conclusion that a living area rooms are not a reliable indicator of its sale value based just on 0.05 weak correlation score.

What exactly does correlation entail? A statistical measure called correlation describes how linearly closely two variables are related (meaning they change together at a constant rate). It's a typical technique for illustrating straightforward relationships without explicitly mentioning cause and effect.

However, correlation is the analytic term used to describe the relationship between two numerical values. Furthermore, we consider the relationship to be linear, meaning that for each unit change in one element, the other will also change by a defined amount.

To know more about correlation visit:

https://brainly.com/question/18168133

#SPJ4

The relative sizes of the cations and anions, as well as the electrical charge on each component ion, both have an impact on the crystal structure of crystalline ceramic materials.

The ionic radii and charge of the constituent ions are the two factors that govern the crystal structure. Clear edges and faces, x-ray diffractivity, and often high melting temperatures are characteristics of crystalline materials. Amorphous solids, on the other hand, melt at a wide range of temperatures, have surfaces that are curved or uneven, and do not produce well-resolved x-ray diffraction patterns. Cation and anions are the two categories of ions. Positive atoms are those that have lost electrons. The term "cation" refers to the positive ion. Negative charge results from an atom gaining electrons.

Learn more about crystal here:

https://brainly.com/question/13008800

#SPJ4

Tesla's competitive edge in terms of stock appreciation has been facilitated by reinvesting profits in order to continuously create and construct better electric automobiles.

Tesla competes in its industry by using a wide range of distinctions. The plan calls for creating unrivalled car models that set Tesla apart from other automakers. Its car models, including the Model S, are appealing to an increasing market of environmentally aware consumers because they have eco-friendly technologies.

For many years, Tesla's competitive advantage in the world of electric vehicles was unconquerable. Tesla's position at the top of the EV food chain has been cemented by its cutting-edge design, superior technology, and CEO who loves Mars.

To know more about automobiles visit:-

https://brainly.com/question/14854598

#SPJ4

The amperage will be about 1A if a squirrel cage induction motor is attached to operate at 480V and draws 2A of current at 240V.

What is the main purpose of motor overload protection?

To prevent the motor from being harmed or destroyed by an excessive current flow is the fundamental goal of motor overload prevention.

In order to preserve the motor's windings and other components from harm, overload protection is designed to trip and disconnect the motor if the current flowing through it exceeds a specific threshold.

This increases the motor's durability and dependability and reduces the need for pricey repairs or replacements.

The 2,400V three-phase motor is the one that is most likely to have 15 or 18 motor leads out of the following motors.

In order to accommodate the higher voltage and to give the user more control over the motor's performance, motors with higher voltage ratings frequently have more leads.

To know more about induction motor, visit: https://brainly.com/question/28852537

#SPJ4

The acceleration of a falling object in the presence of air resistance is equal to the acceleration caused by gravity less the acceleration from air resistance.

The DE vdxdv=cxbv2 governs the differential equation of a free falling body, where v and x denote velocity and displacement, respectively. The body's velocity is determined by the equation v2=2bc(1e2bx)bcx. The derivative of position with respect to time is velocity, or v(t)=ddt(x(t)). In terms of time, acceleration is the derivative of velocity: a(t)=ddt(v(t))=d2dt2(x(t)).With this knowledge, the vertical velocity formula, vf=vi+gt v f = v I + g t, may be used to calculate the object's terminal velocity. This equation is used by physicists to predict how any item will travel on a vertical plane.

To learn more about acceleration  click on the link below:

brainly.com/question/12550364

#SPJ4

Extremely high engine temperatures can be the consequence of inadequate cooling brought on by a too lean mixture, a fuel grade that is too low, a lack of lubrication, or a lack of airflow over the engine.

Your engine's oil helps lubricate it to reduce friction and ensure that all of its parts operate without difficulty. Your oil will heat up rapidly when there is insufficient oil because of increased friction. This leads to oil breakdown and, if the engine is run at temperatures that are too high, can even ignite a fire. Even so, did you think to check the oil? You better have, as low oil supplies are typically the source of excessive oil temperatures in the majority of reciprocating aircraft engines. pilot blunder. Without lubricating oil, engines struggle to regulate internal heat, which puts you in danger.

To learn more about temperatures click on the link below:

brainly.com/question/11464844

#SPJ4

An abnormally high engine oil temperature can be caused by a low oil level, using oil with high viscosity, or operating with an excessively rich fuel mixture.

An abnormally high engine oil temperature indication can be caused by multiple factors, including:

If the oil level is too low, there might not be enough oil to properly cool the engine, leading to increased temperature. Using a oil with a higher viscosity than recommended can also cause increased friction and heat. Lastly, operating with an excessively rich fuel mixture can lead to incomplete combustion and additional heat generation.

https://brainly.com/question/31536201

8-bit 2's complement binary form of -95 is 10100001.

A musical form known as binary form consists of two connected pieces that are typically repeated. A framework also utilised in dance choreography is binary. This is typically sung in the key of A-A-B-B in music.

Given Decimal Number = -95

(95)10 = 010111112

Calculate the 2's complement of 95 to get the 8-bit binary 2's complement form of -95.

Calculate 1's complement of 01011111

Invert the bits of a given number to get it's 1's complement.

Therefore, 1's complement of 01011111 is 10100000

Add 1 to 1's complement of number obtained in step 2.

10100000 + 1 = 101000012

Therefore, 8-bit 2's complement binary form of -95 is 10100001.

Learn more about binary form

https://brainly.com/question/29503956

#SPJ1

The security is provided using an insecure login scheme. They offer data about an existing user, but they are not trustworthy. They don't offer.

What Is Anxiety? A sensation of inferiority (not being good enough) or uncertainty is called insecurity. It causes anxiety about your objectives, connections, and capacity to handle particular circumstances. Everyone experiences insecurity occasionally. It can occur for many reasons and manifest itself in various facets of life.

What Leads to Insecurity? Standards set by the individuals we contact with, like our family, friends, and classmates, as well as societal expectations that could be real or imagined, are associated to insecurities. When we evaluate ourselves against others, insecurities arise.

To know more about insecurity visit:

https://brainly.com/question/13181813

#SPJ4

The solution involves hyperbolic trigonometric functions. The closed-form solution: v = (gm/k) tanh[ (k/m) (ge - t tanh⁻¹(gm/(k ge))) ]

The problem of determining the motion of a jumper who starts from rest in free fall can be solved using calculus. We can begin by using Newton's second law, F = ma, which in this case can be written as mg - kv = m dv/dt, where m is the mass of the jumper, g is the acceleration due to gravity, k is the air resistance coefficient, v is the velocity of the jumper, and t is time.

This differential equation can be solved using separation of variables. Rearranging, we have:

(1/m) dv / (g - (k/m)v) = dt

Integrating both sides, we get:

(1/m) ln|g - (k/m)v| = (1/ge)t + C

where C is an integration constant. Solving for v, we get:

v = (gm/k) - (gm/k) tanh[(k/m)(ge - C)t]

Now, we can use the initial condition v=0 at t=0 to solve for the integration constant C. This gives us:

C = ge - (1/k) tanh⁻¹(gm/(k ge))

Substituting this back into our solution for v, we obtain the closed-form solution:

v = (gm/k) tanh[ (k/m) (ge - t tanh⁻¹(gm/(k ge))) ]

This equation describes the velocity of the jumper as a function of time, given the initial conditions of starting from rest and in free fall. The solution involves hyperbolic trigonometric functions, which are commonly used to describe the motion of objects subject to air resistance. This closed-form solution can be useful in predicting the motion of jumpers in various scenarios, such as in the sport of skydiving or bungee jumping, where the initial conditions may vary.

To know more about trigonometric functions, visit:https://brainly.com/question/6904750

#SPJ4

The correct answer is False.Interior walls and partitions are required to be rated in Type 1 and Type II construction.

Type I: Highly fire resistant, noncombustible (or limited-combustible) structure, frequently made of concrete. Type II: Structure that is noncombustible (or limited-combustible) and has less fire protection than Type I; normally, this is steel construction that may or may not be fireproofed. The kind of construction can have an impact on the building process, raw resources, complexity, time constraints, support requirements, and construction activities. It includes rafters, trusses, and joists. These three different kinds of beams work together to create a structure that gives the roof its form.

To learn more about construction click on the link below:

brainly.com/question/29775584

#SPJ4

The weight of a dry-rodded unit is typically 98.6 lb/ft3.

By dividing the volume of air to the total volume, the percentage of air voids in the soil is calculated. The percentage is used to express this. In a fully saturated state, the fraction of air gaps in the soil is zero. where Va = Air Volume.

To determine the typical dry-rodded unit weight:

To start, figure out how much the coarse aggregate weighs in each trial:

Trial 1 = 76.6 lb - 20.3 lb = 56.3 lb

Trial 2 = 75.1 lb - 20.3 lb = 54.8 lb

Trial 3 = 78.8 lb - 20.3 lb = 58.5 lb

Next, calculate the average weight of the coarse aggregate:

(56.3 lb + 54.8 lb + 58.5 lb) / 3 = 56.5 lb

Finally, calculate the average dry-rodded unit weight:

Unit weight = (56.5 lb) / (1/2 ft3) = 113 lb/ft3

Therefore, the average dry-rodded unit weight is 113 lb/ft3.

b. To calculate the percent voids between aggregate particles for each trial:

First, calculate the weight of the saturated surface-dry aggregate:

Wet weight = weight of bucket filled with saturated coarse aggregate - weight of empty bucket

Trial 1: 92.3 lb - 20.3 lb = 72 lb

Trial 2: 90.8 lb - 20.3 lb = 70.5 lb

Trial 3: 94.5 lb - 20.3 lb = 74.2 lb

Dry weight = wet weight / bulk dry specific gravity

Trial 1: 72 lb / 2.620 = 27.48 lb

Trial 2: 70.5 lb / 2.620 = 26.88 lb

Trial 3: 74.2 lb / 2.620 = 28.30 lb

Next, calculate the volume of the bucket filled with saturated surface-dry aggregate:

Volume = 1/2 ft3

Finally, calculate the percent voids between aggregate particles for each trial:

Percent voids = (1 - (Dry weight / (Unit weight x Volume))) x 100%

Trial 1: (1 - (27.48 lb / (113 lb/ft3 x 1/2 ft3))) x 100% = 60.8%

Trial 2: (1 - (26.88 lb / (113 lb/ft3 x 1/2 ft3))) x 100% = 62.3%

Trial 3: (1 - (28.30 lb / (113 lb/ft3 x 1/2 ft3))) x 100% = 58.5%

Therefore, the percent voids between aggregate particles for each trial are:

Trial 1: 60.8%

Trial 2: 62.3%

Trial 3: 58.5%

To know more about fraction visit:-

https://brainly.com/question/15237764

#SPJ4