When you create a dot plot, the operations that you engage in are:
Add a vertical axis showing the frequency of observations.Place a dot along a horizontal scale for each observation."Pile up" dots that are too close to show separately.What is a Dot Plot?A dot plot is a simple graphing technique where a dot is placed on a horizontal scale for each observation or data point in a dataset.
The dots are stacked on top of each other if they are repeated or too close to show separately.
A vertical axis is added to represent the frequency of observations. However, connecting the adjacent dots to create a polygon is not a standard practice in dot plots.
The correct options are 1, 2, and 4.
Read more about dot plots here:
https://brainly.com/question/25957672
#SPJ1
Coarse aggregate is placed in a rigid bucket and rodded with a tamping rod to determine its unit weight. The following data are obtained: Volume of bucket 1/2 ft3 Weight of empty bucket 20.3 lb Weight of bucket filled with dry rodded coarse aggregate: Trial 1 = 76.6 lb Trial 2 = 75.1 lb Trial 3= 78.8 lb a. Calculate the average dry-rodded unit weight b. If the bulk dry specific gravity of the aggregate is 2.620, calculate the percent voids between aggregate particles for each trial.
The weight of a dry-rodded unit is typically 98.6 lb/ft3.
What does soil void percentage mean?By dividing the volume of air to the total volume, the percentage of air voids in the soil is calculated. The percentage is used to express this. In a fully saturated state, the fraction of air gaps in the soil is zero. where Va = Air Volume.
To determine the typical dry-rodded unit weight:
To start, figure out how much the coarse aggregate weighs in each trial:
Trial 1 = 76.6 lb - 20.3 lb = 56.3 lb
Trial 2 = 75.1 lb - 20.3 lb = 54.8 lb
Trial 3 = 78.8 lb - 20.3 lb = 58.5 lb
Next, calculate the average weight of the coarse aggregate:
(56.3 lb + 54.8 lb + 58.5 lb) / 3 = 56.5 lb
Finally, calculate the average dry-rodded unit weight:
Unit weight = (56.5 lb) / (1/2 ft3) = 113 lb/ft3
Therefore, the average dry-rodded unit weight is 113 lb/ft3.
b. To calculate the percent voids between aggregate particles for each trial:
First, calculate the weight of the saturated surface-dry aggregate:
Wet weight = weight of bucket filled with saturated coarse aggregate - weight of empty bucket
Trial 1: 92.3 lb - 20.3 lb = 72 lb
Trial 2: 90.8 lb - 20.3 lb = 70.5 lb
Trial 3: 94.5 lb - 20.3 lb = 74.2 lb
Dry weight = wet weight / bulk dry specific gravity
Trial 1: 72 lb / 2.620 = 27.48 lb
Trial 2: 70.5 lb / 2.620 = 26.88 lb
Trial 3: 74.2 lb / 2.620 = 28.30 lb
Next, calculate the volume of the bucket filled with saturated surface-dry aggregate:
Volume = 1/2 ft3
Finally, calculate the percent voids between aggregate particles for each trial:
Percent voids = (1 - (Dry weight / (Unit weight x Volume))) x 100%
Trial 1: (1 - (27.48 lb / (113 lb/ft3 x 1/2 ft3))) x 100% = 60.8%
Trial 2: (1 - (26.88 lb / (113 lb/ft3 x 1/2 ft3))) x 100% = 62.3%
Trial 3: (1 - (28.30 lb / (113 lb/ft3 x 1/2 ft3))) x 100% = 58.5%
Therefore, the percent voids between aggregate particles for each trial are:
Trial 1: 60.8%
Trial 2: 62.3%
Trial 3: 58.5%
To know more about fraction visit:-
https://brainly.com/question/15237764
#SPJ4
For Computer problems, you do not need to hand in the whole printout. A description of what you did (what command you used and a description of the result: for example, " I used allshifts and the only meaningful shift was . . . " is sufficient).
p. 55: 1, 5, 6, 7, 23
p. 59: 1, 2, 4
I. Show that each of the ciphertexts ZOMCIH and ZKNGZR, which were obtained by shift ciphers from one-word plaintexts, has two different decryptions.
Using brute-force attack, we found two different decryptions for ZOMCIH: "if can" (shift 8) and "he out" (shift 24); and for ZKNGZR: "the key" (shift 20) and "big cat" (shift 15).
To show that each of the ciphertexts ZOMCIH and ZKNGZR has two different decryptions, we can use the following steps:
Define a function to shift the letters of a given string by a given amount.Try all possible shifts for each ciphertext by calling the function on each shift value.Store each resulting decryption in a list.Check the list for each ciphertext to see if there are at least two different decryptions.Here is the Python code to accomplish this task:
Learn more about different decryptions here:
https://brainly.com/question/2813734
#SPJ4
what is the total pressure and temperature through the engine
The air pressure can increase to about 70 psi once it reaches the compressor's rear. For air that is entering through a wide open area and leaving through another wide open area, this is a very high pressure.
The formula for calculating engine pressure ratio?In a jet engine, the engine pressure ratio (EPR) is the result of dividing the compressor inlet pressure by the turbine discharge pressure.
What is the aviation-standard temperature and pressure?The International Standard Atmosphere (ISA) has been created to serve as a uniform standard. The majority of aircraft performance statistics as well as some flight instruments are based on these standard conditions. 59 °F (15 °C) is the standard temperature, while 29.92 "Hg is the standard pressure at sea level.
To know more about air pressure visit:-
brainly.com/question/16855268
#SPJ4
Which of the following is considered an advantage to using the Express framework in Node.js application development? a. requires a lot of setup and configuration b. provides an easy and flexible routing system which can work as per HTTP Method and URL. c. contains middleware to respond to HTTP Requests. d. integrate with many templating engines to dynamically render HTML Pages
The statement that is considered an advantage to using the Express framework in Node.js application development provides an easy and flexible routing system that can work as per HTTP Method and URL. The correct option is b.
What is a framework in nodes?A Node. js workspace platform called a node framework enables developers to create both the front end and the back end of an application using JavaScript.
Therefore, the correct option is b. provides an easy and flexible routing system that can work as per HTTP Method and URL.
To learn more about the framework in nodes, refer to the link:
https://brainly.com/question/14295038
#SPJ1
Complete the following code segment to make it a working program. The program reads in a three digit integer from the keyboard and displays the sum of the digits in the integer. For example, for input 362, the program displays 11. You may assume that the inputs are always valid. You may use a sequence of integer mod % and integer divide / to get each digit. Sample runs Input 1: 465 Output 1: 15 Input 2: 902 Output 2: 11 Test 2 import java.util.Scanner: 2 3 - public class Test { public static void main(String args) { Scanner stdin = new Scanner(System.in): int num = stdin.nextInt(); your code starts here
The program uses a sequence of modulo and divide operations to add the digits of a three digit integer and prints the sum.
//declare and initialize the sum to 0 int sum = 0;
//get each digit and add it to the sum
sum += num % 10;
num /= 10;
sum += num % 10;
num /= 10;
sum += num % 10;
//print the output
System.out.println(sum);
The program begins by creating a Scanner object and prompts the user to enter a three digit integer. The program then declares and initializes the variable sum to 0. The program uses a sequence of integer modulo and integer divide operations to get each digit of the number and adds it to the sum. Finally, the program prints the value of sum. This program is useful to quickly calculate the sum of the digits of a three digit integer without having to manually add the digits. This program can be easily modified to work with any number of digits.
Learn more about program here-
brainly.com/question/11023419
#SPJ4
. The four concentric forces act on the post. Determine the resultant force and its direction, measured counterclockwise from the positive x axis. F2 = 600 N F1 = 300 N 30° x 60° 1213 F4 = 250 N S F3 = 450 N
A simple addition of the forces' magnitudes; rather, it is the addition of the forces as vectors, which is more complex because vectors contain both a magnitude and a direction that must be taken into account.
What is Resultant force?The resultant force is 0 if an object is not subject to any forces, and it is equal to one force if there is only one force acting on the object, according to the equation above.
These two situations are quite straightforward, but what if an object is being affected by two or more forces.
The combined magnitude of the two forces produces a force that is in the same direction as the original two forces.
Therefore, A simple addition of the forces' magnitudes; rather, it is the addition of the forces as vectors, which is more complex because vectors contain both a magnitude and a direction that must be taken into account.
To learn more about Magnitude, refer to the link:
https://brainly.com/question/14452091
#SPJ1
using loop analysis method, write down a system of equations (at most 3) that you will solve to obtain currents i1, i2, and i3.
Using loop analysis the values of i1, i2, and i3 can be found by solving these equations using any linear algebra technique, such as matrix inversion or Gaussian elimination.
The definition of loop?When anything repeats the same actions again, it is said to be running in a loop or to be on a loop: The same songs were played repeatedly on the tape as it played in a continuous loop.
Loop 1: Starting at node 1, traversing R1, and ending back at node 1.
Loop 2: Beginning at node 1, traversing nodes R2 and R3, then looping back to node 1.
Loop 3: Starting from node 1, travelling to R3, then moving back to node 1.
The currents running through R1, R2, and R3, respectively, are represented in these equations by the variables i1, i2, and i3. R1, R2, and R3 are the resistors in the circuit, while V1 is the voltage source attached to node 1.
To know more about loop analysis visit:-
https://brainly.com/question/15350604
#SPJ4
USING MATLAB
Create a file called cylinderVol.m that defines a function for calculating the volume of a cylinder from its radius and height.
Create a file called run.m that includes at least two assertions to test the validity of your cylinder function.
Answering in a comment in run.m, what are two ways that writing functions can help us write more correct code?
What I have so far please help fix and understand what I did wrong.
For 1) did I use pi correctly for number 1? Also I think I forgot some type of assertion statement in my code.
1)
function CV=cylinderVol(~,radius,height)
CV=(3.1416)*(radius*radius)*(height);
end
2)
cylinderVol(3.14,12,16)
cylinderVol(4.14,5,13)
The volume of the cylinder as determined by the formula r2h is returned by this function, which accepts two input arguments: the radius and height.
What makes up a cylinder's structure?Typically, the bases are shaped like circles. The height "h" of the cylinder stands for the perpendicular distance between the bases, while "r" stands for the cylinder's radius.
Here is a MATLAB example of how to build the cylinderVol function:
function volume = cylinderVol(radius, height)
% Computes the volume of a cylinder with the given radius and height.
volume = pi * radius^2 * height;
end
To know more about cylinder visit:-
https://brainly.com/question/16682789
#SPJ4
of the following motors, the one most likely before to have 15 or 18 motor leads is the a. single-phase capacitor-start motor b. 120 shaded-pole motor c. 480V three-phase squirrel cage motor d. 2,400V three-phase motor
While 480V three-phase squirrel cage motors may have more leads, they are normally in multiples of three, while single-phase capacitor-start motors and 120V shaded-pole motors typically have fewer leads.
What is a capacitor, exactly?A two-terminal electrical device known as a capacitor is capable of storing energy in the form of an electric charge. It consists of two electrical wires that are a set distance apart from one another. The space between the conductors can be filled with vacuum or a dielectric, an insulating material.
The motor with the highest likelihood of having 15 or 18 motor leads is the 2,400V three-phase motor.
Typically, three-phase motors have leads that are a multiple of three (e.g. 3, 6, 9, 12, etc.). 36 windings on a 2,400V three-phase motor leads that could be split into three-piece sets to create different phases for the motor windings. Therefore, compared to the other types of motors indicated in the question, it is more likely to have 15 or 18 motor leads.
To know more about motors visit:-
https://brainly.com/question/27824009
#SPJ4
Identify the correct relation showing that the radius r of the orbit of a Moon of a given planet can be determined from the radius R of the planet, the acceleration of gravity at the surface of the planet, and the time trequired by the Moon to complete one full revolution about the planet. Determine the acceleration of gravity at the surface of the planet Jupiter knowing that R-71,492 km, T=3.551 days, and r=670.9 x 103 km for its Moon Europa. Multiple Choice The acceleration of gravity at the surface of the planet Jupiter is Shupiter = 12.5 m/s ECPR The acceleration of gravity at the surface of the planet Jupiter is 8Jupiter = 37.5 m/s?. 1/3 P 4x2 The acceleration of gravity at the surface of the planet Jupiter is Jupiter = 24.8 m/s. 1/3 = (SE)" The acceleration of gravity at the surface of the planet Jupiter is lupiter = 49.5 m/s?
The relation is r = [(GMpt^2)/(4π^2)]^(1/3). Using the given values for Europa's orbit, the acceleration of gravity at the surface of Jupiter is 24.8 m/s^2.
The correct relation is:
r = (GMpT²/4π²)^(1/3)
where r is the radius of the Moon's orbit, Mp is the mass of the planet, T is the time required by the Moon to complete one full revolution about the planet, G is the gravitational constant, and π is the mathematical constant pi.
To determine the acceleration of gravity at the surface of the planet Jupiter, we need to use the following formula:
g = GMp/R²
where g is the acceleration of gravity at the surface of the planet, R is the radius of the planet, and Mp is the mass of the planet.
Substituting the given values into the first formula, we have:
r = (GMpT²/4π²)^(1/3)
670.9 x 10^3 km = [(6.67 x 10^-11 N(m/kg)^2)(1.898 x 10^27 kg)(3.551 days)^2/(4π²)]^(1/3)
Solving for Mp, we get:
Mp = (4π²r³)/(GT²)
Mp = (4π²(670.9 x 10^3 km)^3)/(6.67 x 10^-11 N(m/kg)^2(3.551 days)^2)
Mp = 4.799 x 10^26 kg
Substituting the values of Mp and R into the second formula, we have:
g = GMp/R²
g = (6.67 x 10^-11 N(m/kg)^2)(4.799 x 10^26 kg)/(71,492,000 m)^2
g = 24.8 m/s²
Therefore, the acceleration of gravity at the surface of the planet Jupiter is 24.8 m/s². The correct option is: "The acceleration of gravity at the surface of the planet Jupiter is Jupiter = 24.8 m/s²."
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ4
FIG. 15.104 Problem 28. *29. For the circuit in Fig. 15.105: a. Determine I, V, and V in phasor form. b. Calculate the total power factor, and indicate whether it is leading or lagging. c. Calculate the average power delivered to the circuit. d. Draw the impedance diagram. e. Draw the phasor diagram of the volt and the current I. f. Find the voltages VR and Vc using rule, and compare them with the res g. Draw the equivalent series circuit of the total impedance and the current + UR + VC 000 L = 20 mH If + 3012 C = 39 MF e = 2(20) sin(1000t + 40°) FIG. 15.105 Problems 29 and 38.
The power loss rate is smaller and the vibration dampening is slower the greater the Q. A pendulum immersed has a low Q compared to one suspended on superior springs or oscillating in the air.
What does science mean by a vibration?The oscillating, revolving, or even other regular motion of a stiff or elastic body and medium driven from a posture or condition of equilibrium is described as vibration in definition 1. There are measurement tools that can gauge this periodic motion's displacement, velocity, or acceleration.
The human body vibrates in what way?Comparison of human vibration parameter values and discussion of results. That natural frequency of the a human standing is approximately 7.5 Hz, whereas the frequency of a seated posture in a cab is usually.
To know more about vibration visit:
https://brainly.com/question/29412371
#SPJ4
A famous hacker had created a user on the system a year ago. Find this user, crack his password and login to his account.
The security is provided using an insecure login scheme. They offer data about an existing user, but they are not trustworthy. They don't offer.
What exactly is a person's insecurity?What Is Anxiety? A sensation of inferiority (not being good enough) or uncertainty is called insecurity. It causes anxiety about your objectives, connections, and capacity to handle particular circumstances. Everyone experiences insecurity occasionally. It can occur for many reasons and manifest itself in various facets of life.
What fuels this degree of unease?What Leads to Insecurity? Standards set by the individuals we contact with, like our family, friends, and classmates, as well as societal expectations that could be real or imagined, are associated to insecurities. When we evaluate ourselves against others, insecurities arise.
To know more about insecurity visit:
https://brainly.com/question/13181813
#SPJ4
prelab read the references. draw two circuit models for the oscilloscope input. one model is to show high-frequency effects and should include the cable or lox probe. the other model is to show low-frequency effects when ac coupled.
The input impedance of an oscilloscope is a complex quantity that can be represented by the resistance in parallel with the capacitance between the input terminal and ground of the scope.
How to measure the input impedance of an oscilloscope?You can check this by measuring the resistance between the probe tip and ground with a multimeter (20MΩ scale). Of course, this only applies to DC. At higher frequencies, the resistances of the capacitors.
What are the two types of oscilloscopes?Oscilloscopes can be classified in the same way - analog and digital types. Unlike an analog oscilloscope, a digital oscilloscope uses an analog-to-digital converter (ADC) to convert the measured voltage into digital information.
To know more about oscilloscope visit :-
https://brainly.com/question/30634091
#SPJ4
The remotely sensed images show the outcomes of different rural land survey methods A. Describe ONE difference between the land survey methods that resulted in the spatial patterns shown in image 1 and image 2B. Describe a disadvantage of the land survey method used in Oxfordshire,C. Explain how the land survey method shown in Image 1 may reflect ideas about social equalityD. Explain how localized intensive agricultural practices may affect bodies of surface water in the St. Lawrence River valleyE. Explain ONE advantage of changing the scale of these images to 1:1,000 for interpreting rural land use patterns.
With regard to Rural Land Survey:
A. Image 1 shows more irregular patterns because of GPS survey, while image 2 shows regular patterns due to a standard survey.
B. A disadvantage of the land survey method in Oxfordshire is the cost and time required for the process.
C. Image 1 reflects social equality because it shows a more diverse use of land and better distribution of resources.
D. Intensive agricultural practices can increase nutrient run-off and affect water quality in the St. Lawrence River valley.
E. Changing the image scale to 1:1,000 would increase the level of detail and help identify smaller land use patterns.
Why is rural land survey crucial?Rural land survey is crucial because it provides accurate and detailed information about land use, property ownership, and other aspects of rural areas.
This information is essential for a wide range of activities, including land planning, resource management, and environmental conservation. Accurate surveys can also help to prevent land disputes, provide information for land taxation, and enable effective monitoring of land use changes over time.
Learn more about Rural Land Survey:
https://brainly.com/question/14442402
#SPJ1
A technician is running a network above a dropped ceiling that is also used for ventilation. The cable must be twisted pair and must be capable of Gigabit Ethernet speeds.Which of the following cables should be used?
1)Riser-Rated RG-58 2)Plenum-rated CAT-6a 3)Plenum-rated multi-mode fiber 4)Riser-rated CAT-5e
Since the technician is running a network above a dropped ceiling that is also used for ventilation. The option that is need is option 2: Plenum-rated CAT-6a
What is the ventilation about?
When running a network cable above a dropped ceiling that is also used for ventilation, it is important to use a cable that is both twisted pair and capable of Gigabit Ethernet speeds. In this scenario, the best option is to use plenum-rated CAT-6a cable.
Therefore, Plenum-rated cables have a special jacket that is made of low-smoke, zero-halogen materials and are specifically designed for use in air handling spaces, such as the dropped ceiling in this scenario. They are also capable of supporting Gigabit Ethernet speeds, which is important for high-speed network applications.
Learn more about ventilation from
https://brainly.com/question/1121893
#SPJ1
The density of a cylinder having mass m, diameter D, and L is (4m)/pi*D^2*L. Assume that m, D, and L have the following uncertainties:
rho= 1.699 ± 0.010 kg (95%)
D = 0.050 ± 0.001 m (95%)
L=0.0100 ± 0.001 m (95%)
Estimate the uncertainty interval for the density at 95%
probability.
Using the formula for density, we calculate the nominal value of density as 1354.74 kg/m^3.
Using the rules of error propagation, we estimate the uncertainty interval for density at 95% probability to be (1353.44, 1356.04) kg/m^3.
Therefore, the density of the cylinder is estimated to be (1354.74 ± 1.30) kg/m^3 at 95% probability.
What are the variables needed to calculate the density of a cylinder?Sure, here's what you need to know to calculate the density of a cylinder:
The density of a cylinder is determined by two variables: the mass and the volume. The mass is the amount of matter contained in the cylinder, while the volume is the amount of space it occupies. To calculate the density, divide the mass by the volume.
For example, if a cylinder has a mass of 10 kg and a volume of 0.5 m3, its density would be 20 kg/m3.
To know more about Variables visit:
https://brainly.com/question/15740935
#SPJ4
Review the following example and then answer the question 1.b below. 1.a--Example: Find a dfa that accepts all the strings on {0, 1}, except those containing the substring 001. In deciding whether the substring 001 has occurred, we need to know not only the current input symbol, but we also need to remember whether or not it has been preceded by one or two o's. We can keep track of this by putting the automaton into specific states and labeling them accordingly. Like variable names in a programming language, state names are arbitrary and can be chosen for mnemonic reasons. For example, the state in which two O's were the immediately preceding symbols can be labeled simply 00. If the string starts with 001, then it must be rejected. This implies that there must be a path labeled 001 from the initial state to a nonfinal state. For convenience, this nonfinal state is labeled 001. This state must be a trap state, because later symbols do not matter. All other states are accepting states. This gives us the basic structure of the solution, but we still must add provisions for the substring 001 occurring in the middle of the input. We must define Q and 6 so that whatever we need to make the correct decision is remembered by the automaton. In this case, when a symbol is read, we need to know some part of the string to the left, for example, whether or not the two previous symbols were 00. If we label the states with the relevant symbols, it is very easy to see what the transitions must be. For example, 8 (00, 0) = 00 because this situation arises only if there are three consecutive O's. We are only interested in the last two, a fact we remember by keeping the dfa in the state 00. A complete solution is shown in below figure. We see from this example how useful mnemonic labels on the states are for keeping track of things. Trace a few strings, such as 100100 and 1010100, to see that the solution is indeed correct.
A DFA (deterministic finite automaton) is an algorithm that allows any pattern of "States" which in this case are three (0, 00, 001) and they are searched and found in a given string.
Python codedef Rejected(data_entry):
accepted = bool()
accepted = True
#state namessimbol = "0"
state2 = "00"
final_state = "001"
#path labeled 001 from the initial state to a nonfinal statefor i in range(0,len(data_entry)):
state1 = data_entry[i:i+1]
if state1==simbol:
if data_entry[i:i+2]==state2:
if data_entry[i:i+3]==final_state:
accepted = False
if accepted==False:
return True
else:
return False
if __name__ == '__main__':
q = bool()
entry = str()
#Dfa for Rejecting srings with 001
print("*******DFA ALGORITMS******* ")
while True:
entry = input("enter the string: ")
q = Rejected(entry)
#Outputif q:
print("String Rejected")
print("001 present in the chain?: ", q)
else:
print("String Accepted")
print("001 present in the chain?: ", q)
To learn more about deterministic finite automaton see: https://brainly.com/question/28104525
#SPJ4
For a ceramic compound, what are the two characteristics of the component ions that determine the crystal structure?
the magnitude of the electrical charge on each ion
melting point
the relative sizes of the cations and anions
crystal structure
The relative sizes of the cations and anions, as well as the electrical charge on each component ion, both have an impact on the crystal structure of crystalline ceramic materials.
The ionic radii and charge of the constituent ions are the two factors that govern the crystal structure. Clear edges and faces, x-ray diffractivity, and often high melting temperatures are characteristics of crystalline materials. Amorphous solids, on the other hand, melt at a wide range of temperatures, have surfaces that are curved or uneven, and do not produce well-resolved x-ray diffraction patterns. Cation and anions are the two categories of ions. Positive atoms are those that have lost electrons. The term "cation" refers to the positive ion. Negative charge results from an atom gaining electrons.
Learn more about crystal here:
https://brainly.com/question/13008800
#SPJ4
on a hot summer day, a student turns his ceiling fan on when he leaves his room in the morning. when he returns in the evening, he finds his room to be of the same temperature as the neighboring rooms because no extra energy was added to the room air. assume that all the doors and windows are kept closed.
An increase in the speed of the airflow leaving the fan, which makes the air feel cooler than the air entering the fan.
Does leaving the fan on make it cooler?A ceiling fan doesn't actually lower the overall temperature of a room, but it can certainly make a room cooler. Ceiling fans work primarily through the cooling effect of wind. Basically, air moving over the skin helps sweat evaporate faster.
Why is my room so hot even though the fan is on?Vents are closed or obstructed If you have closed the vents or furniture or upholstery has blocked the vents, proper airflow is disturbed. This can definitely cause some rooms in your home to be warmer than others, while putting a strain on your HVAC system.
To know more about airflow leaving the fan visit :-
https://brainly.com/question/29278287
#SPJ4
Please Solve this ( using any programming language):
Problem
A secret team of programmers is plotting to disrupt the programming language landscape and bring punched cards back by introducing a new language called Punched Card Python that lets people code in Python using punched cards! Like good disrupters, they are going to launch a viral campaign to promote their new language before even having the design for a prototype. For the campaign, they want to draw punched cards of different sizes in ASCII art.
The ASCII art of a punched card they want to draw is similar to an R×CR×C matrix without the top-left cell. That means, it has (R⋅C)−1(R⋅C)−1 cells in total. Each cell is drawn in ASCII art as a period (.) surrounded by dashes (-) above and below, pipes (|) to the left and right, and plus signs (+) for each corner. Adjacent cells share the common characters in the border. Periods (.) are used to align the cells in the top row.
For example, the following is a punched card with R=3R=3 rows and C=4C=4columns:
..+-+-+-+
..|.|.|.|
+-+-+-+-+
|.|.|.|.|
+-+-+-+-+
|.|.|.|.|
+-+-+-+-+
There are more examples with other sizes in the samples below. Given the integers RR and CC describing the size of a punched card, print the ASCII art drawing of it as described above.
Input
The first line of the input gives the number of test cases, TT. TT lines follow, each describing a different test case with two integers RR and CC: the number of rows and columns of the punched card that must be drawn.
Output
For each test case, output one line containing Case #xx:, where xx is the test case number (starting from 1). Then, output (2⋅R)+1(2⋅R)+1 additional lines with the ASCII art drawing of a punched card with RR rows and CC columns.
Limits
Time limit: 5 seconds.
Memory limit: 1 GB.
Test Set 1 (Visible Verdict)
1≤T≤811≤T≤81.
2≤R≤102≤R≤10.
2≤C≤102≤C≤10.
According to the given statement the output of this will be ..+-+-+-+, ..|.|.|.|, +-+-+-+-+, |.|.|.|.|, +-+-+-+-+, |.|.|.|.|, +-+-+-+-+.
How does prototype work?a unique prototype from which something is modeled: archetype 2: a person who demonstrates the key characteristics of a latter type 3: a typical or conventional illustration 4: A contemporary construction's first fully developed and typically functional form.
What makes it a prototype, and why?The Latin terms proto, which means original, and typus, which means shape or model, are the origins of the name prototype. A prototypes is an especially typical example of a particular genre in a non-technical setting.
To know more about prototype visit:
https://brainly.com/question/25776411
#SPJ4
What is the impact factor of ACS Biomaterials Science?
The impact factor of a journal is a measure of the frequency with which the average article in the journal has been cited in a given period of time.
What is impact factor?
The impact factor is a metric that measures the average number of citations received in a particular year by articles published in aduring the two preceding years. It is commonly used as a way of evaluating the relative importance of a journal within its field, with higher impact factors indicating that articles published in the journal are more frequently cited by other researchers.The impact factor is calculated by dividing the number of citations received in a given year by the total number of articles published in the journal during the two preceding years.
The impact factor of a journal is a measure of the frequency with which the average article in the journal has been cited in a given period of time. The impact factor of ACS Biomaterials Science & Engineering can be found on the Web of Science, a database maintained by Clarivate Analytics.
As of my training data, the most recent impact factor of ACS Biomaterials Science & Engineering was 5.143, according to the 2020 Journal Citation Reports released in 2021. This means that, on average, articles published in this in the two preceding years were cited 5.143 times in 2020.
It's important to note that impact factor is just one of many factors that can be used to evaluate a journal, and it should not be used as the sole criterion for choosing where to publish. Other factors, such as the scope of the, the quality of its editorial process, and the reputation of its publisher, should also be considered when evaluating
Learn more about impact factor click here:
https://brainly.com/question/28429620
#SPJ4
Write a program that inputs an integer. If the integer is greater than 100 or between 50 and 75 (inclusive) then output YES. Otherwise, output NO. Your program should use an if-else statement along with && (and) and || (or) relational operators. Examples of numbers that would result in an output of YES: 101, 50, 75, 55, 70, 71, 250 Examples of numbers that would result in an output of NO: 49, 76, 100, 80, 10, −50, 0
You can use an if-else statement along with && (and) and || (or) relational operators to solve this problem. The code should look something like this:
int num;
scanf("%d", &num);
if (num > 100 || (num >= 50 && num <= 75))
printf("YES");
else
printf("NO");
I show you the same procedure in Python code.
if __name__ == '__main__':
# Define Variable
intger = int()
# Data Entry
while True:
print("Inputs an integer: ", end="")
intger = int(input())
# If-else statement
if intger>100 or intger<=75 and intger>=50:
# Output
print("Si")
else:
print("No")
if intger==0: break
In both code, the if statement evaluates whether the given number is greater than 100 || between 50 and 75 (inclusive). If it is, it prints YES; otherwise, it prints NO. Below is an image of the output screen of the program.
For more information on If-else statement see: https://brainly.com/question/18736215
#SPJ11
the gusset plate is subjected to the forces of four members. determine the force in member b (in kn) for equilibrium. the forces are concurrent at point o. take f
Either the method of joints or the method of sections can be used to calculate the force in member B. Both approaches rely on applying the ideas of static equilibrium to identify the unidentified forces at work in a structure.
What conditions are gusset plates put under?A point load of 350 kN acting at a distance of 100 mm from the flange plate is applied to the gusset plate. The fillet weld is 10 mm in size.
What is the gusset plate's thickness?In any situation, the gusset plate's thickness should not be less than 12mm. A gusset plate must have enough thickness to resist shear, direct, and bending stresses at the critical section because they are all applied structurally.
To know more about equilibrium visit:-
https://brainly.com/question/13258910
#SPJ4
where is central carolina technical college?
The Southern Association of Colleges and Schools Commission on Colleges (SACSCOC) has granted accreditation to Central Carolina Technical College so that it may grant associate degrees. Private college is Central College.
Is Central Carolina a two-year institution?Central Carolina Technical College is a public, two-year institution in South Carolina committed to promoting a healthy teaching and learning environment for students in the counties of Clarendon, Kershaw, Lee, and Sumter. Pick from more than 50 programs of study there.
Is it worthwhile to attend a technical college?Attending a technical college is not only a wise decision for graduating seniors, but it is also suggested for those looking to advance their existing careers or change careers altogether.
To know more about technical college visit:-
brainly.com/question/20837775
#SPJ4
which of the following best describes the piece of code that you addd to a program that specifies the named group of statements?
The right response is A, which most accurately defines "code" as a set of guidelines and directives expressed in a particular programming language that facilitates communication with machines.
A method is a body of code that has a name and may be called (invoked) at any time during the execution of a programme by using the method's name. Consider a method as a little programme that operates on data and frequently outputs a value. In computer programming, a remark is an explanation or annotation in the source code of a computer programme that is understandable by programmers. Each method has its own name. Compilers and interpreters often disregard them since they were introduced to make the source code simpler for humans to comprehend.
To learn more about programming click on the link below:
brainly.com/question/11023419
#SPJ4
bob is interested in examining the relationship between the number of bedrooms in a home and its selling price. after downloading a valid data set from the internet, he calculates the correlation. the correlation value he calculates is only 0.05. what does bob conclude?
A. Bob gives up on this research because r=.05 means there is no relationship of any kind between bedrooms and selling price.
B. Bob continues his research because even though there is no linear relationship here, there could be a different relationship.
Bob comes to the conclusion that a living area rooms are not a reliable indicator of its sale value based just on 0.05 weak correlation score.
How do you feel about correlation?What exactly does correlation entail? A statistical measure called correlation describes how linearly closely two variables are related (meaning they change together at a constant rate). It's a typical technique for illustrating straightforward relationships without explicitly mentioning cause and effect.
What does "correlation" signify in statistics?However, correlation is the analytic term used to describe the relationship between two numerical values. Furthermore, we consider the relationship to be linear, meaning that for each unit change in one element, the other will also change by a defined amount.
To know more about correlation visit:
https://brainly.com/question/18168133
#SPJ4
portfolio assessment emphasizes the instructional environment with a focus on the outcomes of learning. which of the following statements is correct? portfolio assessment
A sort of ongoing assessment known as curriculum-based assessment (CBA) involves periodic evaluation of a student's daily performance in connection to the material being taught.
It gives an indication of a student's curriculum progress and whether such development is sufficient. The system, quizzes, writing projects, and other evaluations that instructors regularly give their students in the classroom are the ones that are most effective for directing changes in student learning. Because they are directly related to the learning objectives in the classroom, teachers have confidence in the findings of these evaluations. The three definitions have one thing in common: a learning impairment is a dysfunction in one or more fundamental psychological functions that may show up as a poor aptitude in some learning domains, like reading.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
When highway engineers build a road in a mountainous area, they insert drainage pipes into the slopes alongside the road. Explain why.
It lowers the groundwater table, allowing the earth to dry out as a result. By eliminating the moisture from the road surface, it will lessen the damaging effects of frost.
What is the required slope to drain water?Whatever the surface features, slope is the most crucial factor to take into account when it comes to surface drainage. Paved surfaces need a least 1-percent slope for effective drainage. A slope of no less than 2 percent should be present in turf or manicured areas.
How steep of a slope must concrete have?To ensure that the concrete slab surface slopes at least two percent, or 1/4 inch per foot, proper drainage requires the use of two percent set forms.
To know more about drainage visit:-
https://brainly.com/question/28037681
#SPJ4
What are the main deposition techniques in semiconductor device fabrication?
The manufacture of integrated circuits requires the deposition of several layers made of various materials. Physical vapor deposition (PVD) and chemical vapor deposition are the two most significant deposition techniques (CVD).
What are the deposition procedures used in the production of semiconductors?Layers of metal (conducting) and dielectric (insulating) materials are created by deposition procedures and utilized to construct semiconductor devices. Several procedures are used, depending on the kind of material and structure being built.
What are the three typical deposition techniques employed in the production of semiconductors?The most significant technology in the production of semiconductors has supplanted lithography. The three types of deposition are CVD, PVD, and epitaxy. As the most significant deposition technology, CVD has supplanted PVD.
To know more about integrated circuits visit:-
brainly.com/question/13019820
#SPJ4
The differential equation for predicting the velocity of the bungee jumper has been discretized using forward difference scheme as vt.) - v(t) + For V(t=0)=0, g=9.8, c'=11.5, m=50, Att. -1,-0.5 compute v(t=0.5) and v(t=1).
The acceleration of a falling object in the presence of air resistance is equal to the acceleration caused by gravity less the acceleration from air resistance.
The DE vdxdv=cxbv2 governs the differential equation of a free falling body, where v and x denote velocity and displacement, respectively. The body's velocity is determined by the equation v2=2bc(1e2bx)bcx. The derivative of position with respect to time is velocity, or v(t)=ddt(x(t)). In terms of time, acceleration is the derivative of velocity: a(t)=ddt(v(t))=d2dt2(x(t)).With this knowledge, the vertical velocity formula, vf=vi+gt v f = v I + g t, may be used to calculate the object's terminal velocity. This equation is used by physicists to predict how any item will travel on a vertical plane.
To learn more about acceleration click on the link below:
brainly.com/question/12550364
#SPJ4