Where would you go to find out more about these local housing laws?

According to the definition in the PMBOK Project Manual, a project is any effort that requires a certain amount of time, whose objective is to create a unique product, service or result that benefits an organization.

So JR's intention when launching a project probably fits some of those goals defined by the PMBOK.

There are some particular characteristics of the projects, some of them are:

Must have start date and end date.

Must have resources defined in advance.

It must have clearly defined goals.

Therefore, every project is a plan with a defined life cycle that will help to achieve objectives more effectively.

Every project will require essential resources, such as staff, materials and investment, which must be defined in advance to avoid waste.

It is essential that each project has its schedule well defined so that the tasks go as planned, and that there is a project manager to coordinate and control the project team so that the results are achieved as initially planned.

Answer:

the answer to your question is martha Graham

Answer:

draw house and another page for the inside of the house

Explanation:

Why?

just if you wanted a idea.

Also if you don't wanna draw a house draw

the sunset, or something cool.

Answer:

you should draw a mushroom

Answer: The verb would be appear but it is connected to "often" therefore your answer is linking.

Explanation: Often is being used as an adjective in this sentence to describe the word appear.

Answer:

Hello this is the persons account I want to make braniless so I put this

Explanation:

Debussy haha now that's a nice name

Answer: A

Explanation:

I chose A because like B we need electricity for our home to cook, etc. We also need insurance for our car because in case it gets damaged, it can cover damage to your vehicle and protect you financially if you're liable for someone else's injuries or damages. We also need D, because we need our phone to call in case there is an emergency or something.

Answer:

A

Explanation:

Answer:

badd ok i dont understand thta question

Answer:

When you’re cooking an expensive roast, getting it to the table cooked just the way you like it is critical. To do that, you must hit the meat’s target temperature spot-on; 5 or 10 degrees off can make a huge difference. But judging precisely when meat is done is tricky, because what you’re actually gauging is not whether the food is ready to eat right now—but whether it will be ready to eat once it has rested. Meat will continue to cook even after it has been removed from the heat source, a phenomenon known as “carryover cooking.” This happens for two reasons: First, the exterior of a large roast gets hot much more quickly than the interior. Second, because heat always moves from a hotter to a cooler area, as long as there is a difference intemperature between the two regions, heat will keep moving from the surface to the center even after you remove the meat from the heat source. This transfer will slow, and eventually stop, as internal and external temperatures approach each other and even out. But the process can result in a significant increase in temperature at the center of a large roast, bringing it from a perfect pink to a disappointing gray.

IN THE OVEN

The exterior of meat heats up far more quickly than the interior, resulting in a huge temperature differential between the outside and the center of a roast. The internal temperature is what matters. When the center of a roast comes within 10 degrees of the target, it’s time to take it off the heat.

OFF HEAT

As long as there is a difference between the outside and inside temperatures of a cut of meat, heat will continue to travel inward. Off heat, the temperature of this roast continued to rise—a ­phenomenon known as “carryover cooking.” After 15 minutes, it reached its target of 150 degrees.

So when, exactly, should you remove meat from the heat source? Both the size of the roast and the heat level during cooking will impact the answer. A large roast will absorb more heat than a thin steak, which means there will be more heat in the meat and therefore a greater amount of carryover cooking. Similarly, meat cooked in a 400-degree oven absorbs more heat than meat cooked in a 200-degree oven, so carryover cooking is greater in a roast cooked in a hot oven.

Use our guidelines to determine exactly when to take meat off the heat so when you serve it, it’s at the desired temperature. (Note: While carryover cooking can occur in poultry, for food safety reasons we usually don’t recommend removing it from the heat until it’s done.)

| | For Final Serving Temperature | Stop Cooking When Temperature Reaches | | | --- | --- | --- | --- | | Beef and Lamb | |

For large roasts/high heat

|

Thin cuts/moderate heat

| | Rare | 125°F | 115°F | 120°F | | Medium-Rare | 130°F | 120°F | 125°F | | Medium | 140°F | 130°F | 135°F | | Well Done | 160°F | 150°F | 155°F | |

Pork

| |

For large roasts/high heat Thin cuts/moderate heat

| | Medium | 150°F | 140°F | 145°F | | Well Done | 160°F | 150°F | 155°F |

Answer:

bb bb bb bb b bbbbbbbb bbbbb BBB BBB. bbbb

Answer:

Almost all other types of visual arts or architecture and interior design

Answer:

appalachain

Explanation:

both bluegrass and country tend to use acoustic, stringed instruments

Answer:

Dec. 2021 A multi state outbreak of Listeria monocytogenes, linked to Dole packaged leafy greens. 17 people were infected with the outbreak strain of Listeria from 13 different states. The FDA sent investigators to multiple Dole processing facilities to conduct on site inspections while at the same time Dole initiated their own investigation. On Dec 22, 2021, Dole voluntarily recalled all products and brands from their Bessemer City, NC and Yuma, AZ facilities. Some ways to prevent outbreaks and recalls, Implement a program of daily or weekly accuracy testing, plan effectively and use correct segregation controls, improve checking procedures, develop proactive controls to support visual and mechanical inspections, use detection equipment correctly. In restaurants. promote hand washing before and after preparing food, clean and sanitize surfaces properly, separate raw foods from ready to eat foods.

Explanation: Food Recalls, CDC website

The most common cause of illness from contaminated food or water is norovirus.

Consumption of contaminated foods cause food- borne illness . A wide variety of disease-causing microbes or pathogens can contaminate food, resulting in a wide variety of foodborne illnesses. The majority of foodborne diseases are caused by bacterial, viral, or parasitic infections.

Foodborne illnesses can be either infectious or toxic. The distinction is determined by the agent that causes the condition. Food infections are caused by microbes such as bacteria, whereas intoxications are caused by toxins such as those produced by molds.

Gastroenteritis is caused by norovirus infection (inflammation of the stomach and intestines). This causes diarrhea, vomiting, and abdominal pain. Other names for norovirus illness include food poisoning and stomach flu.

Because of a suspected norovirus outbreak, the Tacoma-Pierce County Health Department has closed a various restaurants in 2018.

To learn more about norovirus

https://brainly.com/question/8040050?referrer=searchResults

#SPJ5

Mixed media is the single artwork with the application of multiple art forms. The mixed media is used for the creation of illuminated manuscripts.

The mixed media art forms can be formulated with the different art forms combined in a single art piece. It is a new technique for the formulation of the culture in the artwork.

The artwork is the art of immense creativity and can be used with cost-effective technology as well.

Examples of the use of mixed media art are sculptures, illuminated manuscripts, collages, and assemblages. Thus, option D is correct.

Learn more about mixed media, here:

https://brainly.com/question/4239446

Answer: The answer would be D

Explanation:

Edge 2022

Answer:

C: Neutralize

Explanation:

Answer:

here uare mark brailiest

Explanation:

Answer:

Kim is on a crew that sets up the equipment for a very popular musician. Before the concerts, she sets up lights, microphones, sound equipment, and video screens above the stage. After the concerts, she takes down the equipment. Her job is best described as

✔ Audio and Video Equipment Technician

.

Sylvia sets up, runs, and maintains the equipment for a radio station. Her job is best described as

✔ Broadcast Technician

.

Kenneth works in a small studio using technical equipment and computers. He edits television commercials. His job is best described as

✔ Film and Video Editor

.

Jose works in a music studio operating the equipment for musicians to record their music before selling it to the public. He adjusts the equipment so the recordings have good, clear sound. His job is best described as

✔ Sound Engineering Technician

.

Explanation:

Answer:

I would agree with her, I would say number one

Explanation:

Answer:

it seems like it would be all of the above but D makes the most sense.

Explanation:

Answer:

c

Explanation:

get it

Take EDM for example; it's a combination of words and sounds all cramed together to create a piece of music, most of the time it has no official reason or back story but is simply made to be enjoyed. This concept is the same with Jazz music. When jazz was invented there was no definitive reason or way to play it, you just grabbed an instrument and started playing whatever cords and rhythms you thought sounded nice.

Take EDM for instance; it is a combination of words and sounds all cramed collectively to create a piece of track, most of the time it has no reputable motive or returned tale but is without a doubt made to be loved. This idea is identical to the Jazz tune. while jazz become invented there was no definitive cause or manner to play it, you just grabbed a tool and started out playing anything with cords and rhythms Your concept sounded first-class.

Electronic dance music (EDM), also referred to as dance song, membership tune, or certainly, dance is an extensive variety of percussive electronic music genres made in large part for nightclubs, raves, and festivals.

Learn more about Electronic dance music (EDM) here: brainly.com/question/975276

#SPJ2

Answer:

A silent Voice!! Manly cus it has a great meaning behind it

Explanation:

[tex]Answer:[/tex]

Landscapes can play a big part in the arts because it is a wide frame style that allows for more unique drawings of many diverse things. From oceans to fantasy lands, and pop art to realism, the possibilities don't end there!

Answer:

Film first started with a single 5 second frame made by Thomas Edison, using one of the first camera made by Johann Zahn in 1685.  Film has developed over the years frm pictures chained together to create a moving object also known as stop-motion to full on cinematic masterpieces that use 3D sculpting and green screens to create a whole new world! Some people say there's a mystery behind the camera and the first film ever made that had no sound and no color, there was a whole disappearance and murder-mystery behind it; but even so film has developed into a beautiful form of art which people use to express deep feelings in.

Explanation:

I use to go to TAPA and I was a film major- I mostly said this... I don't know if it'll help but I hope it does! You can reword it if you want!

Answer:

these

Explanation:

Improve overall performance. One of the clearest benefits of regular reviews is the opportunity to improve the overall performance in the workplace. ...

Increase employee engagement. ...

Identify promotion opportunities. ...

Identify training needs. ...

Strengthen relationships and loyalty.