Answer: the earth
Explanation: Earth exerts a gravitational pull on the moon 80 times stronger than the moon's pull on the Earth. Over a very long time, the moon's rotations created fiction with the Earth's tugging back, until the moon's orbit and rotational locked with Earth.
and that's why the earth pulls the moon
1. What is Ohm"s law?
2. If you placed a negatively charged hairbrush near your hair, what charge would your hair be?
3. You must change a lightbulb and the new lightbulb has a larger resistance. If the voltage of the battery does not change, what happens to the current going through the flashlight?
HELLPPPP
1. Ohm's law shows the relationship between:
voltagecurrentresistanceFormula: voltage = current x resistance
2. The negative charge on the hairbrush will induce a positive charge on your hair. As a result, your hair is going to be attracted to the hairbrush (and repelled by other strands of hair.)
3. V = IR, so if the resistance of the current increases, and the voltage of the current stays the same, there is as a result, going to be less current.
Best of Regards!
If a power utility were able to replace an existing 500 kV transmission line with one operating at 1 MV, it would change the amount of heat produced in the transmission line to
Answer:
It would change the amount of heat produced in the transmission line to four times the previous value.
Explanation:
Given;
initial voltage in the transmission line, V₁ = 500 kV = 500,000 V
Final voltage in the transmission line, V₂ = 1 MV = 1,000,000
The power lost in the transmission line due to heat is given by;
[tex]P = \frac{V^2}{R}[/tex]
Power lost in the first wire;
[tex]P_1 = \frac{V_1^2}{R}[/tex]
[tex]R = \frac{V_1^2}{P_1}[/tex]
Power lost in the second wire
[tex]P_2 = \frac{V_2^2}{R}\\\\ R = \frac{V_2^2}{P_2}[/tex]
Keeping the resistance constant, we will have the following equation;
[tex]\frac{V_2^2}{P_2} = \frac{V_1^2}{P_1} \\\\P_2 = \frac{V_2^2P_1}{V_1^2}\\\\[/tex]
[tex]P_2 = \frac{(1,000,000)^2P_1}{(500,000)^2}\\\\P_2 =4P_1[/tex]
Therefore, it would change the amount of heat produced in the transmission line to four times the previous value.
What do you mean is a variable velocity and uniform velocity
Answer:
Uniformly accelerated rectilinear motion (MRUA), also known as uniformly varied rectilinear motion (MRUV), is one in which a mobile moves along a straight path being subjected to a constant acceleration.
Explanation:
in the figure shown if angle i increases slightly angle r will
Answer:
we need the image to do so.
Explanation:
sorry
a box with a Constance velocity has a 5 N of force applied to it from all sides and direction. what will happen to the motion of the box as result?
A-the object will come to rest
b-the velocity of the object will remain the same
c- the velocity of the object will decrease
d- the velocity of the object will increase
Answer:
b-the velocity of the object will remain the same
Explanation:
Forces from opposite sides cancel each other, so there is no net force on the box that would affect its motion. The velocity of the box will remain unchanged.
__
(The box may be crushed, but it will continue in the same direction at the same speed.)
Answer:
b the velocity of the object will remain the same
Explanation:
use your brain:)
A 0.5 kg basketball moving 5 m/s to the right collides with a 0.05 kg tennis
ball moving 30 m/s to the left. After the collision, the tennis ball is moving 34
m/s to the right. What is the velocity of the basketball after the collision?
Assume an elastic collision occurred.
O A. 11.4 m/s to the left
O B. 11.4 m/s to the right
O C. 1.4 m/s to the right
O D. 1.4 m/s to the left
Answer:
1.4 m/s to the left
Explanation:
just took it c:
A car is stopped for a traffic signal. When the light turns green, the car accelerates, increasing its speed from zero to 7.63 m/s in 3.94 s. What is the magnitude of the linear impulse experienced by a 73.7 kg passenger in the car during this time? Submit Answer Tries 0/20 What is the average force experienced by the passenger?
Answer:
1. p = 562.3 kg*m/s
2. F = 142.7 N
Explanation:
1. The linear impulse (p) is given by:
[tex] p = mv [/tex]
Where:
m: is the passenger's mass = 73.7 kg
v: is the speed = 7.63 m/s
[tex] p = mv = 73.7 kg*7.63 m/s = 562.3 kg*m/s [/tex]
Hence, the magnitude of the linear impulse experienced by a passenger is 562.3 kg*m/s.
2. The average force can be calculated using the following equation:
[tex] F = \frac{m(v_{f} - v_{0})}{t} = \frac{73.7 kg(7.63 m/s - 0)}{3.94 s} = 142.7 N [/tex]
Therefore, the average force experienced by the passenger is 142.7 N.
I hope it helps you!
Research has shown that this type of interview is the most effective in predicting later job
performance.
Answer:
Situational Interview
Explanation:
A situational interview is about as close to the real job as it gets. During this type of interview, candidates may be presented with a visual or audio simulation of a scenario and asked to respond to it. They are asked to analyze a problem and profer suggestions on how they would handle it.
If the candidate has solved similar problems in the past, it will come to the fore.
If they haven't then the best outcome is that it will tell the interviewers how well the candidate is able to solve similar problems.
An example of a Situational Interview question is this:
How would you handle an angry customer who for no justifiable reason has decided to create a problematic scene to disrupt the business?
Because Situational Interviews are about behavioral responses (present, past, and future), they are powerful tools in determining or predicting future job performance. An interviewing technique that is developed using this methodology is called the S.T.A.R.
This is an acronym for Situation, Task, Action, Result.
Situation: the candidate is asked to present a challenging situation that occurred recently. This tests what the candidate sees as a challenging situation.
Task: The candidate based on the situation is asked to identify what they need to do to remedy the problem. This tells the interviewer(s) whether or not the candidate can think up a solution for the problem.
Action: Here they define the actual steps taken to resolve the problem
Result: The candidate against the above is required to give the result gotten
Action and Result tell the interviewer the quality of the candidate's ability to follow through and achieve the intended results. This also judges the quality of execution in terms of cost and time. The candidate with the lowest cost and time and the highest quality of outcome is considered the best.
Cheers
A marathon is 26 mi and 385 yd long. Estimate how many strides would be required to run a marathon. Assume a reasonable value for the average number of feet/stride.
Answer:
According to the University of Iowa, the average length of a stride is 5ft.
Now, the total distance of the marathon is:
26mi and 385yd.
Let's transform that distance into ft.
1mi = 5280ft
Then:
26mi = 26*5280ft = 137,280ft
1yd = 3ft
then:
385yd = 385*3ft = 1,155ft.
Then the total distance of the marathon, in ft, is:
D = 137,280ft + 1,155ft = 138,435 ft.
Now the average number of strides needed will be equal to the quotient between the total distance of the marathon and the distance traveled in each stride.
N = 138,435ft/5ft = 27,687.
What are the significant transitions middle adulthood?
Answer:
Making the transition from young adulthood to middle adulthood can be difficult for some people. There are many changes which affect areas in a person’s biology, their psychology, their social life and their spiritual relationship. There are multiple stages of development which may affect an individual during middle adulthood which can be defined between either 30-65 years old or 40-65 years old.
Explanation:
A 60.0-kg person rides in elevator while standing on a scale. The elevator is traveling downward but
slowing down at a rate of 2.00 m/s2. The reading on the scale is closest to
The reading on the scale is closest to 708N.
What is weight?The weight of any object is the mass times the acceleration due to gravity on Earth or any other planet.
Weight W = mg
where g = 9.81 m/s²
Given is the mass of person, m = 60kg, and the acceleration downward of the elevator a =2 m/s² , then the weight will be
W = m(a+g)
W = 60x (2+9.81)
W= 60x11.8
W= 708 N
Thus, reading on the scale will be 708N
Learn more about weight.
https://brainly.com/question/10069252
#SPJ2
Which two substances have no fixed shape and no fixed volume?
A: crystalline solid and noncrystalline solid
B: noncrystalline solid and liquid
C: plasma and liquid
D: gas and plasma
Answer:
D: gas and plasma
Explanation:
Name the part of the human eye which acts as a protective layer for the eye
Answer:
Cornea
Explanation:
Cornea protects outer layer of the eye.
Silly Goose falls 1.0 m to the floor. How long does the fall take
Answer:You need to give more explanation sorry
Explanation:
Answer:
4.20 seconds
Explanation:
Supposing that silly goose weighs 69 pounds, we need to start on the math.
Simple maths, truly and really. 69/1=69, of course.
Therefore it will take 4.20 seconds for silly goose to hit the ground. if he is going to be a silly goose though, he can just go in the pond, instead of wasting his time.
A 75 Kg skateboarder is riding downhill, exerting 25 N. What is their acceleration?
Answer:
[tex]a=0.33\frac{m}{s^2}[/tex]
Explanation:
Hello.
In this case, since the force is defined in terms of the mass and acceleration as follows:
[tex]F=ma[/tex]
Given the force and the mass, we can compute the acceleration as shown below:
[tex]a=\frac{F}{m}=\frac{25N}{75kg}=\frac{25kg\frac{m}{s^2} }{75kg}\\ \\a=0.33\frac{m}{s^2}[/tex]
Best regards.
Logan is a runner he in 60 seconds he can run 360 m what speed did he travel at
Answer:
hhhhhhhh
Explanation:
What's the difference between an open cluster and a globular cluster
An open cluster is a group of up to a few thousand stars that were formed from the same giant molecular cloud, and are still loosely gravitationally bound to each other. In contrast, globular clusters are very tightly bound by gravity. ... Open clusters are very important objects in the study of stellar evolution.
the mass of the Moon is 7.35x1022kg and the mass of the Earth is 5.97x1024kg. The Moon’s orbit distance is 3.84x108m. What is the gravitational force on the Moon by the Earth? What is the gravitational force of the Earth on the Moon?
ok no ok no ok no ok no ok no ok no ok no
Six seconds after starting from rest, a car is moving at 15 m/s. What is the car's
average acceleration?
6 m/s2
0-5 m/s?
5 m/s2
2.5 m/s?
-2.5 m/s?
Answer:
2.5 m/s²
Explanation:
a = ∆v/∆t = (15 m/s)/(6 s) = (15/6) m/s² = 2.5 m/s²
A light wave in space is described by the general function: u(r, t) = 1 (2π) 3/2 Z dk A(k) e i(k·r−ωt) . (1) (a) Find the particular solution knowing that at t = 0 the wave is given by
Answer:
hello your question is incomplete attached below is the complete question
Answer : attached below
Explanation:
A) finding the particular solution at t = 0
attached below is the detailed solution of the particular solution knowing that t = 0
What is the key for a successful relationship? and Why?
Answer:
communication, if you don't talk you'll never know what's going on.
Explanation:
Converting compound units
You would like to know whether silicon will float in mercury and you know that can determine this based on their densities. Unfortunately, you have the density of mercury in units of kilogram/meter3 and the density of silicon in other units: 2.33 gram/centimeter3. You decide to convert the density of silicon into units of kilogram/meter3 to perform the comparison. By which combination of conversion factors will you multiply 2.33 gram/centimeter3 to perform the unit conversion?
Answer:
Explanation:
Given the density of silicon as 2.33g/cm³
We are to convert this to kg/cm³
We will be using the following conversion factors
1000g = 1kg
2.33g = x
Cross multiply
1000x = 2.33
x = 2.33/1000
x = 0.00233kg
Also we need to convert 1cm³ to 1m³
1cm = 0.01m
1cm³ = 0.01×0.01×0.01
1cm³ = 0.000001m³
Substituting into the density value of silicon
2.33g/cm³ = 0.00233kg/0.000001m³
= 2330kg/m³
3. How are force, work, and power related?
Answer:
Work is the energy needed to apply a force to move an object a particular distance, where force is parallel to the displacement. Power is the rate at which that work is done.
Answer: Work is the energy needed to apply a force to move an object a particular distance, where force is parallel to the displacement. Power is the rate at which that work is done.
Explanation:
A soccer ball is kicked with a velocity of 8 m/s at an angle of 23°. What is the
ball's acceleration in the vertical direction as it flies through the air?
A. -7.4 m/s2
B. O m/s2
C. 3.1 m/s2
D. -9.8 m/s2
Answer: -9.8 m/s2
Explanation:
i need help, for physics
An empty cup weighs 14 g. The same cup filled with ice cream weighs 120 g. All of the ice cream melts before anyone eats it.
What is the weight of the melted ice cream?
A.0 g
B. 14 g
C. 106 g
D. 134 g
Answer:
D
Explanation:
Who is the founding father of modern psychology?
Answer:
Sigmund Freud
Explanation:
Answer:
Wilhelm Wundt
A block of mass 20 kg is being pulled by a force F on a rough horizontal surface. If the
coefficient of friction is 0.4, calculate
a) the normal force, N
b) the static frictional force, f
c) the minimum force required for the block to move with uniform speed
If a net force of 15N is applied to a 3kg box, what is the acceleration of the box?
Group of answer choices
5 m/s2
45 m/s2
0.2 m.s2
18 m/s2
Answer:
5
Explanation:
Bextra in bf x vi d sj by
Please help. :( I am horrendously bad at Physics...
1) Why is the mass of an NFL player important to the game?
- Essay question.
2) What causes objects to accelerate?
A. Mass
B. Force (my answer)
C. Inertia
D. Velocity
3) Impulse is related to the amount of force acting on a football for a period of time. What will happen to a football if the impulse it experiences is increased?
- Essay question
4) There is a gravitational force between the Earth and the Moon. Which mass pulls harder?
A. The Earth pulls harder
B. The moon pulls harder
C. This is a trick question, they pull with the same force. (My answer)
5) The moon goes around the Earth while the Earth seems to be not affected. Why is the Earth not really moved by the force of gravity applied by the moon? (Hint: Consider the mass of the Earth and inertia)
- Essay question
6) Imagine a force is applied to a toy to make it roll across the floor. How would the acceleration of the toy car change if the same force is applied for a longer period of time?
A. Acceleration would be smaller
B. Acceleration would be greater
C. Acceleration would be the same (my answer. ?)
D. Acceleration would change randomly
7) Which gravitational force is greater? The Earth's gravitational force on you or your gravitational force on Earth?
A. The Earth's gravitational force on me is greater
B. My gravitational force on the Earth is greater
C. The two forces are equal
I know this is a bit long, but I really appreciate anyone who could help. <3
Answer:
1) I believe The mass of a football player is important because. If you are a football player and you are not able to tackle ,push , throw the ball very far- exedra, then you will not be able to play because football includes many factors of weigh. therefor you have to have a greater mass or you will not be able to play football or you wont be very good which can lead to being kicked off the team. So in order to be able to play football you must be of a certain topic of weight.
Explanation:
.