Which fallacy is committed by the following argument? There has been a blizzard every January blizzard in January for the last three years, so there must always be a a. hasty generalization d. composition le· Ipost hoc c. division

Answers

Answer 1

The fallacy committed in the argument is: hasty generalization. The correct option is A

This fallacy occurs when someone draws a conclusion based on insufficient evidence or a small sample size. In this case, the argument assumes that just because there have been blizzards in January for the last three years, there will always be blizzards in January.

However, this conclusion is not necessarily true because the sample size is too small. Weather patterns can change from year to year, and three years is not enough data to make such a sweeping generalization.

It's important to recognize and avoid hasty generalization fallacies because they can lead to incorrect conclusions and decisions. To avoid this fallacy, it's important to gather sufficient evidence before drawing conclusions and to consider a larger sample size to ensure the data is representative.

Additionally, it's helpful to remain open to the possibility that things can change and to consider alternative explanations for the observed data. The correct option is A

To know more about hasty generalization, refer here:

https://brainly.com/question/8139662#

#SPJ11

Complete question:

Which fallacy is committed by the following argument? There has been a blizzard every January blizzard in January for the last three years, so there must always be a

a. hasty generalization composition

b. slippery slope

c. division


Related Questions

pedro gonzalez will invest $22,000 at the beginning of each year for the next 8 years. the interest rate is 11 percent. what is the future value? use appendix c to calculate the answer.

Answers

The future value of Pedro Gonzalez's investment is $385,660.

To calculate the future value of Pedro Gonzalez's investment, we can use the formula for the future value of an annuity. An annuity is a series of payments made at regular intervals.

The formula for the future value of an annuity is:

FV = Pmt x [(1 + r)^n - 1]/r

Where:

FV = Future value

Pmt = Payment amount

r = Interest rate

n = Number of payments

In this case, Pedro Gonzalez will make 8 payments of $22,000 each year. The interest rate is 11 percent. So, using the formula above:

FV = $22,000 x [(1 + 0.11)^8 - 1]/0.11

FV = $22,000 x [2.718 - 1]/0.11

FV = $22,000 x 17.53

FV = $385,660

Therefore, the future value of Pedro Gonzalez's investment is $385,660. This means that if he invests $22,000 at the beginning of each year for 8 years with an interest rate of 11 percent, he will have $385,660 at the end of the 8th year.

To know more about future value refer here :

https://brainly.com/question/14860893#

#SPJ11

Consider call options on the same stock with the same maturity date. You bought a call option with a strike price of $55 and sold another call option with a strike price of $80 for $5.12 and $2.57, respectively. This strategy is called a bull spread.
What is your payoff if the stock price is $67.5 on the expiration date?
What is your profit if the stock price is $67.5 on the expiration date?
What is your payoff if the stock price is $85 on the expiration date?
What is your profit if the stock price is $85 on the expiration date?

Answers

To analyze the payoff and profit of the bull spread strategy with call options, we need to consider the strike prices, option premiums, and stock prices on the expiration date.

Given:

- Bought call option with a strike price of $55 for $5.12

- Sold call option with a strike price of $80 for $2.57

1. Stock price of $67.5 on the expiration date:

Payoff from the bought call option: Max(Stock price - Strike price, 0)

Payoff = Max($67.5 - $55, 0) = $12.5

Payoff from the sold call option: Max(Strike price - Stock price, 0)

Payoff = Max($80 - $67.5, 0) = $12.5

Total payoff = Payoff from bought call option - Payoff from sold call option

Total payoff = $12.5 - $12.5 = $0

Profit is the total payoff minus the initial cost:

Profit = Total payoff - Total cost

Profit = $0 - ($5.12 - $2.57) = -$2.55

2. Stock price of $85 on the expiration date:

Payoff from the bought call option: Max(Stock price - Strike price, 0)

Payoff = Max($85 - $55, 0) = $30

Payoff from the sold call option: Max(Strike price - Stock price, 0)

Payoff = Max($80 - $85, 0) = $0

Total payoff = Payoff from bought call option - Payoff from sold call option

Total payoff = $30 - $0 = $30

Profit is the total payoff minus the initial cost:

Profit = Total payoff - Total cost

Profit = $30 - ($5.12 - $2.57) = $27.45.

To know more about profit refer here

https://brainly.com/question/15036999#

#SPJ11

RevampScamp uses a job-order costing system. It has two manufacturing departments - Fabrication and Assembly. RevampScamp started, completed, and sold only two trailers during January. The following information is available for January 2018: Fabrication Assembly Estimated Total Labor-Hours Used 30 15 Estimated Total Machine-Hours Used 20 50 Estimated Total Fixed Manufacturing Overhead $6,000 $7,000 Estimated Variable Manufacturing Overhead Per $20 per Labor-Hour Labor-Hour Estimated Variable Manufacturing Overhead Per $15 per Machine-Hour Machine-Hour Job A Job B Direct Materials $22,500 $24,500 Direct Labor Cost $2,500 $4,000 Actual Labor-Hours Used Fabrication 9 13 Assembly 23 28 Machine-Hours Used Fabrication 13 18 Assembly 6 8 Assume RevampScamp's accountant calculated the predetermined overhead rate for Fabrication to be $190 per machine-hour and for Assembly to be $220 per direct labor hour. What was RevampScamp's Cost of Goods Sold for January 2018?

Answers

Cost of goods sold= 70610

Revamp Scamp uses a job-order costing system with two manufacturing departments, Fabrication and Assembly.

To calculate the Cost of Goods Sold (COGS) for January 2018, we need to determine the total manufacturing costs for both Job A and Job B.

First, we calculate the overhead costs for each job:
Job A:
Fabrication Overhead = 13 machine-hours * $190/machine-hour = $2,470
Assembly Overhead = 23 labor-hours * $220/labor-hour = $5,060
Job B:
Fabrication Overhead = 18 machine-hours * $190/machine-hour = $3,420
Assembly Overhead = 28 labor-hours * $220/labor-hour = $6,160

Next, we add direct materials, direct labor, and overhead costs to find the total cost for each job:
Job A Total Cost = $22,500 (direct materials) + $2,500 (direct labor) + $2,470 (fabrication overhead) + $5,060 (assembly overhead) = $32,530
Job B Total Cost = $24,500 (direct materials) + $4,000 (direct labor) + $3,420 (fabrication overhead) + $6,160 (assembly overhead) = $38,080

Finally, we sum the total costs of Job A and Job B to find RevampScamp's Cost of Goods Sold for January 2018:
COGS = $32,530 (Job A) + $38,080 (Job B) = $70,610

You can read more about overhead costs at https://brainly.com/question/25051360

#SPJ11

For its three investment centers, Gerrard Company accumulates the following data: I II III Sales $1,925,000 $4,062,000 $3,986,000 Controllable margin 1,109,020 2,537,280 4,253,200 Average operating assets 5,041,000 7,929,000 12,152,000 Compute the return on investment (ROI) for each center.

Answers

The ROI for Investment Center I is 22.0%, the ROI for Investment Center II is 32.0%, and the ROI for Investment Center III is 35.0%.

To compute the return on investment (ROI) for each of Gerrard Company's investment centers, we can use the following formula:

ROI = (Controllable margin / Average operating assets) x 100%

Using the data provided in the question, we can calculate the ROI for each investment center as follows:

Investment Center I:

ROI = ($1,109,020 / $5,041,000) x 100%

ROI = 22.0%

Investment Center II:

ROI = ($2,537,280 / $7,929,000) x 100%

ROI = 32.0%

Investment Center III:

ROI = ($4,253,200 / $12,152,000) x 100%

ROI = 35.0%

In summary, Gerrard Company's Investment Centers I, II, and III have ROIs of 22.0%, 32.0%, and 35.0%, respectively.

Learn more about Company's here:

https://brainly.com/question/29354835

#SPJ11

The lakeside electronics company has 2 bond issues outstanding. both bonds pay $100 semi annual interest plus $1,000 at maturity. Bond A has a remaining maturity of 15 years, Bond B has a maturity of one year. What is the value of each of these bonds now when the going rate of interest is 9%.

Answers

The value of Bond B is $1,047.62.

The value of each bond, we need to use the present value formula, which takes into account the future cash flows of the bond and discounts them back to their present value based on the going rate of interest.

For Bond A, the cash flows are as follows:

*   Semi-annual interest payment of $100

*   $1,000 at maturity in 15 years

The going rate of interest is 9%, which means the discount rate is 4.5% per semi-annual period (9% divided by 2). Using this information, we can calculate the present value of each cash flow and add them together to get the value of the bond:

PV of interest payments:

$100 / [tex](1 + 0.045)^1 + $100 / (1 + 0.045)^2 + ... + $100 / (1 + 0.045)^{30[/tex]

PV of interest payments = $1,624.95

PV of principal payment = $1,000 / [tex](1 + 0.045)^{30[/tex]

PV of principal payment = $239.64

Value of Bond A = PV of interest payments + PV of principal payment

Value of Bond A = $1,624.95 + $239.64

Value of Bond A = $1,864.59

Therefore, the value of Bond A is $1,864.59.

For Bond B, the cash flows are as follows:

*   Semi-annual interest payment of $100

*   $1,000 at maturity in 1 year

Using the same discount rate of 4.5% per semi-annual period, we can calculate the present value of each cash flow and add them together:

PV of interest payments = $100 /[tex](1 + 0.045)^1[/tex]

PV of interest payments = $95.24

PV of principal payment = $1,000 / [tex](1 + 0.045)^1[/tex]

PV of principal payment = $952.38

Value of Bond B = PV of interest payments + PV of principal payment

Value of Bond B = $95.24 + $952.38

Value of Bond B = $1,047.62

Therefore, the value of Bond B is $1,047.62.

Learn more about Bond visit: brainly.com/question/25965295

#SPJ4

which items describe long-run aggregate supply (lras), and which ones describe short-run aggregate supply (sras)? all prices can change

Answers

Long-run aggregate supply (LRAS) is characterized by potential output, full employment, and flexible input prices. In contrast, short-run aggregate supply (SRAS) is influenced by temporary factors such as changes in input prices, expectations, and business cycle fluctuations.

Long-run aggregate supply (LRAS) represents the level of output that an economy can produce when all resources are fully employed and all input prices are flexible. It is determined by factors such as technology, labor force size, and capital stock. In the long run, changes in aggregate demand only affect the price level, while output remains at its potential level.

On the other hand, short-run aggregate supply (SRAS) is influenced by temporary factors and changes in input prices. SRAS can shift due to changes in wages, raw material prices, or other production costs. Expectations also play a role in shaping SRAS, as businesses may adjust their production levels based on anticipated changes in demand. Additionally, SRAS is influenced by business cycle fluctuations, such as booms or recessions, which impact the overall level of economic activity.

To learn more about wages

Click here brainly.com/question/15431287

#SPJ11

When a company receives cash before providing any products or services are provided the following results: A.Liabilities and assets increase. B.Liabilities and revenues increase. C.Assets and stockholders' equity increase. D.Assets and revenue increase.

Answers

The correct answer is D. Assets and revenue increase. When a company receives cash before providing any products or services, it increases both assets (cash) and revenue.

When a company receives cash before providing any products or services, it is typically considered an advance payment or unearned revenue. This transaction creates a liability on the company's balance sheet since the company has an obligation to provide the products or services in the future.

Option A (Liabilities and assets increase) is incorrect because while liabilities increase due to the obligation to provide the products or services, there is no direct increase in assets at the time of receiving the cash.

Option B (Liabilities and revenues increase) is incorrect because the revenue is not recognized at the time of receiving the cash. Revenue is recognized when the products or services are provided.

Option C (Assets and stockholders' equity increase) is incorrect because there is no direct impact on stockholders' equity at the time of receiving the cash.

However, the revenue is recognized in the income statement at a later point when the products or services are actually provided.

Learn more about Asset, visit:

brainly.com/question/27972503

#SPJ11

King Cakes Commercial Bakery is installing machines that precisely weigh the flour and other dry ingredients before adding them to the wet ingredients. King Cakes believes these controls will serve to Multiple Choice provide performance feedback Increase inovation discover errors reduce costs
Previous question

Answers

King Cakes Commercial Bakery believes that installing machines to precisely weigh the flour and other dry ingredients before adding them to the wet ingredients will help reduce costs. Option D is the correct answer.

By implementing machines that accurately measure the dry ingredients, King Cakes Commercial Bakery expects to minimize errors in the ingredient proportions, leading to better consistency in their products. This increased precision in ingredient measurements can help reduce waste and optimize ingredient usage, resulting in cost savings for the bakery. Additionally, by ensuring the accurate measurement of ingredients, the bakery can improve the quality of its products, enhance customer satisfaction, and potentially increase sales.

The bakery expects these controls to reduce costs by minimizing ingredient waste and optimizing ingredient usage, ultimately improving the efficiency and profitability of their operations.

Option D is the correct answer.

You can learn more about profitability  at

https://brainly.com/question/28319983

#SPJ11

Alyssum, Inc., a merchandising company, has provided the following extracts from their budget for the first quarter of the forthcoming year: Jan $270,000 Feb March $295,000 $300,000 Purchases on account The vendors have required the following terms of payment: Month of purchase 10% First month after the purchase 35% Second month after the purchase 35% Calculate the total payment on account for the month of March. O A.$122,925 O B.$227,750 C.$300,000 O D.$177,975

Answers

The total payment on account for the month of March is the sum of the payments made in March for January and February purchases, which is: $94,500 + $103,250 + $30,000 = $227,750

To compute the total payment on account for the month of March, we must first ascertain the purchases made on account in January, February, and March, and then apply the vendor's payment terms to those transactions.

Given that the purchases on account are not specified in the question, we can assume that they are equal to the monthly budgeted amounts. As a result, the monthly purchases for January, February, and March are $270,000, $295,000, and $300,000, respectively.

Using the vendor's payment conditions, we can calculate the amount of each purchase paid in the month of purchase, the first month after purchase, and the second month after purchase, as shown below:

January purchases: $270,000 x 10% = $27,000 paid in January, $270,000 x 35% = $94,500 paid in February, and $270,000 x 35% = $94,500 paid in March

February purchases: $295,000 x 10% = $29,500 paid in February, $295,000 x 35% = $103,250 paid in March, and $0 paid in April

March purchases: $300,000 x 10% = $30,000 paid in March, $0 paid in April, and $0 paid in May

So the total payment is $94,500 + $103,250 + $30,000 = $227,750

For such more question on payment:

https://brainly.com/question/26049409

#SPJ11

To calculate the total payment on account for the month of March, we need to first determine the amount of purchases made in January, February, and March.

For January, the budgeted amount is $270,000.

For February, the budgeted amount is $295,000.

For March, the budgeted amount is $300,000.

Next, we need to calculate the payment due for each month's purchases based on the vendors' required terms.

For January's purchases, the payment due is $270,000 x 10% = $27,000.

For February's purchases, the payment due is $295,000 x 35% = $103,250.

For March's purchases, the payment due is $300,000 x 35% = $105,000.

Adding up the payment due for each month, we get:

$27,000 + $103,250 + $105,000 = $235,250

Therefore, the total payment on account for the month of March is option B, $227,750.

To know more about vendors please visit...

brainly.com/question/16855290

#SPJ11

marketers should differentiate their products to appeal to different groups. what are these groups called?

Answers

The groups that marketers should differentiate their products to appeal to are called target markets. A target market refers to a specific group of consumers that a company focuses on when promoting and selling its products or services.

These groups are typically defined by demographics, such as age, gender, income level, and geographic location, as well as psychographics, which include personality, lifestyle, and values. By identifying and understanding their target markets, marketers can tailor their marketing messages, promotions, and product offerings to appeal to the unique needs and preferences of each group. For example, a company that sells outdoor gear may have a target market of adventure seekers who enjoy camping, hiking, and other outdoor activities.

They would create marketing campaigns and products that cater to this group's interests, such as lightweight tents and sleeping bags, hiking boots, and camping stoves. Differentiating products for different target markets can help companies increase sales and revenue by catering to the specific needs and preferences of each group. It also helps to create brand loyalty among customers who feel that a company understands and meets their needs.

For more such questions on target markets

https://brainly.com/question/20812603

#SPJ11

2. The Bob White Karate Studio has been a local fixture for almost 40 years. The studio offers training in American Kenpo Karate to students from 3 years old to 80 years old. Students select one of several Page 165 programs: (a) monthly payments, (b) semi-annual payments, or (c) the black belt program. Each of these programs allows them to take group classes as well as one or more private lessons with a qualified black belt instructor, depending on the program selected. For example, the monthly program includes one private lesson, the semi- annual program includes three private lessons, and the black belt program includes one lesson per week until the student attains black belt rank. Additionally, students may purchase additional private lessons, as well as uniforms, sparring gear, and various studio insignia and clothing items. The additional half-hour private lessons are priced as packages, which include 5, 10, 20, 40, or 60 lessons, and the price also varies depending on whether the lessons are provided by senior or junior instructors. When students purchase a package, they are assigned to a particular instructor for the duration of the package. Students typically pay for anything they buy at the time of their purchase, but established students are sometimes allowed to purchase on credit. In that case, they generally must pay within 2 weeks. While all studio employees are also instructors, only a few employees handle sales transactions and accept payments. LO 5-2, LO 5-3, LO 5-5, LO 5-6, LO 5-7
connect
a. Draw a BPMN activity diagram that describes the Bob White Karate Studio's sales and collection process.
b. Prepare a UML class diagram with classes, associations, and multiplicities.
c. Using the preceding information and the following attributes list, prepare a listing of the relational tables necessary to support this sales and collection process. List the tables in the following order: resources, events, agents, type images, and linking tables

Answers

a. The BPMN activity diagram for the Bob White Karate Studio's sales and collection process would include activities such as "Select Program," "Purchase Package/Private Lesson," "Pay for Purchase," "Assign Instructor," and "Record Payment."

b. The UML class diagram would include classes such as "Student," "Instructor," "Program," "Package," "PrivateLesson," "Purchase," and "Payment."

a. The diagram would also include decision points such as "Is the student an established customer?" and "Is the payment on credit?" as well as loops for purchasing additional packages or private lessons.

b. Associations between these classes would include "Student enrolls in Program," "Student purchases Package or Private Lesson," "Purchase includes Package or Private Lesson," and "Payment made for Purchase."

c. The relational tables necessary to support this sales and collection process would include:

Resources: Student, Instructor, Program, Package, PrivateLesson, Purchase, Payment

Events: None required

Agents: None required

Type Images: None required

Linking Tables: Purchase Package (links Purchase to Package), Purchase Private Lesson (links Purchase to Private Lesson), Purchase Student (links Purchase to Student), Purchase Instructor (links Purchase to Instructor)

For more such questions on Purchase

https://brainly.com/question/28888838

#SPJ11

Consider a labor market in which there are high skill and low skill workers. The wage of a high skill worker is $300,000 over the lifetime of the job and the wage of low skill worker is $100,000 over the lifetime of the job. Employers would like to set a minimum level of education as a requirement for each type of job so that workers will sort themselves into the appropriate job according to their ability. Employers know that the cost of attaining education is according to:
Low Skill: C = (25,000) S for S years of schooling High Skill: C = (10,000) S
What is the lowest amount of education that an employer can require for the high skill job so that the employees will sort appropriately?

Answers

Therefore, the lowest amount of education that an employer can require for the high skill job so that employees will sort appropriately is 4 years of schooling. This ensures that the cost of attaining education for a low skill worker is greater than the lifetime wage for a low skill job, but the cost of attaining education for a high skill worker is less than the lifetime wage for a high skill job.

To ensure that workers sort themselves into the appropriate job according to their ability, employers can set a minimum level of education required for each job. In this labor market, the wage for a high skill worker is $300,000 over the lifetime of the job, and the wage for a low skill worker is $100,000 over the lifetime of the job.

To determine the lowest amount of education that an employer can require for the high skill job so that employees will sort appropriately, we need to consider the cost of attaining education for both types of workers.

For low skill workers, the cost of attaining education is C = (25,000)S for S years of schooling. For high skill workers, the cost of attaining education is C = (10,000)S for S years of schooling.

If the minimum level of education required for the high skill job is too low, low skill workers may choose to attain the required education and apply for the high skill job, even though they are not qualified. This could result in a mismatch between worker ability and job requirements, which would be inefficient for both workers and employers.

Therefore, to ensure that workers sort appropriately, the employer must set the minimum level of education for the high skill job such that the cost of attaining education for a low skill worker is greater than the lifetime wage for a low skill job, but the cost of attaining education for a high skill worker is less than the lifetime wage for a high skill job.

Let's call the minimum level of education required for the high skill job "S*". We can set up the following equations to solve for S*:

Lifetime wage for low skill worker = Cost of attaining education for low skill worker
$100,000 = (25,000)S*

Lifetime wage for high skill worker = Cost of attaining education for high skill worker
$300,000 = (10,000)S*

Solving for S*, we get:

S* = 4 years of schooling

Therefore, the lowest amount of education that an employer can require for the high skill job so that employees will sort appropriately is 4 years of schooling. This ensures that the cost of attaining education for a low skill worker is greater than the lifetime wage for a low skill job, but the cost of attaining education for a high skill worker is less than the lifetime wage for a high skill job.

To know more about high-ability person visit:

https://brainly.com/question/31778636

#SPJ11

which one of the following is not among the penalties or costs that companies commonly incur

Answers

Out of the penalties or costs commonly incurred by companies, the one that is not included is "employee bonuses."

Companies commonly incur penalties or costs such as fines for regulatory violations, legal fees for lawsuits, operational expenses, taxes, insurance premiums, employee salaries, benefits, training, and recruitment costs. However, employee bonuses are not categorized as penalties or costs incurred by companies.

Instead, bonuses are additional compensation provided to employees based on performance, achievements, or company profitability. Bonuses are typically discretionary and serve as incentives to motivate and reward employees. While bonuses contribute to the overall financial obligations of a company, they are not considered penalties or costs in the same sense as the other items mentioned above.

Learn more about employee bonuses here: brainly.com/question/32109120

#SPJ11

if you try different starting values for the changing cells and obtain different solutions

Answers

Trying various starting values for the changing cells can lead to different solutions, as optimization algorithms may converge to different local optima.

When using optimization methods to solve problems, starting values in the changing cells can significantly impact the obtained solutions. By trying different initial values, you might discover multiple solutions, which could be local or global optima, depending on the problem's nature.

In mathematical optimization, an objective function is either minimized or maximized, subject to specific constraints. The algorithm iteratively refines the values in the changing cells until a solution satisfying the constraints is found. However, some problems have multiple local optima, which are points where the objective function's value is better than its neighboring points but not necessarily the best possible.

When you start with different initial values in the changing cells, the optimization process may converge to different local optima, resulting in multiple solutions. This phenomenon is more common in non-linear and non-convex problems, as their solution spaces often contain numerous local optima.

To better understand the relationship between starting values and obtained solutions, it is essential to analyze the problem's characteristics and the optimization algorithm's behavior. If you consistently obtain different solutions when changing initial values, it may indicate that the problem is non-convex, and a global optimization method might be required.

In summary, Understanding the problem's properties and the optimization algorithm can help make sense of these varied solutions and guide you towards the best outcome.

To know more about optimization, refer to the link below:

https://brainly.com/question/14160739#

#SPJ11

Suppose scientific research generates positive external benefits. Without government intervention, the market for scientific research would A) produce the efficient amount. B) produce zero research C) produce some research, but less than the efficient amount. D) produce more than the efficient amount.

Answers

Without government intervention, the market for scientific research would C ) produce some research, but less than the efficient amount.

This is because in a free market, individual producers and researchers primarily aim to maximize their own profits and may not take into account the positive external benefits that research generates.

As a result, the quantity of research produced would fall short of the socially optimal level, which considers the broader benefits to society. Government intervention is often necessary to align the private incentives with the societal benefits and ensure the production of the efficient amount of scientific research.

However, this quantity of research would likely fall short of the socially optimal level, which is the efficient amount that takes into account the positive external benefits. Therefore, without government intervention, the market for scientific research would produce some research, but less than the efficient amount.

Learn more about government intervention here : brainly.com/question/26489734

#SPJ11

The following question is based on the cash T-account for XYZ Industries as of December 31, 2019. XYZ Industries T-Account December 31, 2019. What is XYZ's 2019 cash flow from operations? a.A net outflow of $20 million b. A net outflow of $50 million c. A net outflow of $90 million d.A net outflow of $150 million

Answers

Net outflow of cash from operations $90 million. Option C

Based on the given T-account for XYZ Industries as of December 31, 2019, the company had a net outflow of $90 million for the year 2019 from its operations. Cash flow from operations is calculated by adding or subtracting changes in current assets and liabilities from the net income of the company.

Looking at the T-account, we can see that the company had an opening cash balance of $100 million and a closing cash balance of $10 million. This means that the company had a decrease in its cash balance of $90 million.

Now, let's analyze the changes in the current assets and liabilities of the company. We can see that there was an increase in accounts receivable of $30 million and a decrease in inventory of $20 million.

This means that the company had an inflow of cash from accounts receivable but an outflow of cash from inventory. The company also had an increase in accounts payable of $40 million, which means that it had an outflow of cash to pay off its creditors.
Therefore, the calculation of cash flow from operations for XYZ Industries for the year 2019 is as follows:

Net income + Decrease in accounts receivable - Decrease in inventory + Increase in accounts payable
= $50 million + $30 million - $20 million + $40 million
= $100 million

However, since we are looking for the net outflow of cash, we need to reverse the signs of the changes in accounts receivable, inventory, and accounts payable. This gives us:

Net outflow of cash from operations = -$100 million + $20 million + $30 million - $40 million
= -$90 million

Therefore, the correct answer to the question is option c) A net outflow of $90 million.

For more such questions on outflow visit:

https://brainly.com/question/30784700

#SPJ11


analysis is used to determine future results using past data.
analysis is used to detect patterns in existing.

Answers

Analysis is a valuable tool that is used to evaluate and interpret data to gain insights into future results. One of the key uses of analysis is to identify patterns and trends in existing data that can be used to predict future outcomes. By looking at historical data, analysts can identify patterns that are likely to continue and forecast future trends.

Analysis can be applied to a range of different areas, from finance and business to science and technology. In finance, for example, analysts may use data on past stock prices to predict future performance. In business, analysis can help companies identify trends in consumer behavior and adjust their marketing strategies accordingly. To conduct analysis, analysts typically use a range of tools and techniques, such as statistical analysis, data mining, and machine learning.

These techniques allow analysts to sift through large amounts of data to identify meaningful patterns and relationships. Overall, analysis is an essential tool for decision-making in a range of fields, as it provides valuable insights into future outcomes based on past data. By using analysis to detect patterns in existing data, individuals and organizations can make informed decisions that are more likely to lead to success.

For more such questions on Analysis

https://brainly.com/question/15319536

#SPJ11

3 sentances

Discuss how industrialisation and the way that products are manufactured are having a lasting effect on the climate, explain how this will influence the Earths future:

Answers

Industrialization and the way products are manufactured have indeed had a significant and lasting effect on the climate, primarily due to the emission of greenhouse gases (GHGs) and the depletion of natural resources.

These effects have far-reaching consequences for the Earth's future.

Greenhouse Gas Emissions: Industrial activities, particularly the burning of fossil fuels for energy, have led to a substantial increase in GHG emissions, such as carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O). These gases trap heat in the atmosphere, contributing to global warming and climate change. The rising temperatures result in more frequent and severe extreme weather events, sea-level rise, and disruptions to ecosystems.

Deforestation and Land Use Change: Industrialization and increased demand for resources have led to deforestation and significant land use change. Forests act as carbon sinks, absorbing CO2 from the atmosphere. Deforestation not only reduces the Earth's capacity to absorb CO2 but also releases stored carbon when trees are cleared or burned. This further exacerbates climate change.

Resource Depletion: Industrial production requires the extraction of raw materials, leading to the depletion of non-renewable resources, such as minerals, metals, and fossil fuels. The extraction and processing of these resources require substantial energy inputs, contributing to GHG emissions. Resource depletion also leads to ecological imbalances and loss of biodiversity.

Waste Generation and Pollution: Industrial processes generate significant amounts of waste and pollution, including toxic chemicals, pollutants, and non-biodegradable materials. Improper waste management and disposal can contaminate air, water, and soil, posing risks to human health, ecosystems, and biodiversity.

The influence of these factors on the Earth's future is profound:

Climate Change Impact: The continued release of GHGs and the resulting climate change will lead to more frequent and intense extreme weather events, disruptions in ecosystems, loss of biodiversity, and habitat destruction. This will affect food production, water availability, and human livelihoods, leading to increased social, economic, and environmental challenges.

Rising Sea Levels: As temperatures increase, glaciers and ice caps melt, contributing to rising sea levels. This poses a significant threat to coastal communities, leading to increased coastal erosion, flooding, and displacement of populations.

Resource Scarcity: The depletion of non-renewable resources and unsustainable consumption patterns will lead to resource scarcity, affecting industries, economies, and societies. This can trigger conflicts over resources, disrupt supply chains, and necessitate the development of sustainable alternatives.

Environmental Degradation: Industrial pollution, habitat destruction, and ecological imbalances can have long-term consequences on ecosystems, reducing their resilience and ability to provide vital ecosystem services. This can impact the health and well-being of both humans and wildlife.

To mitigate these impacts and secure a sustainable future, it is crucial to transition towards cleaner and more sustainable industrial practices. This includes adopting renewable energy sources, promoting energy efficiency, implementing circular economy principles to minimize waste and maximize resource utilization, and investing in sustainable technologies and innovation. Additionally, international cooperation, policy changes, and individual actions are needed to address the complex challenges posed by industrialization and climate change, aiming for a more sustainable and resilient planet.

for more such questions on Industrialization

https://brainly.com/question/1078028

#SPJ11

The government implements a temporary contractionaryfiscal​ policy, which corresponds to a declinein US government spending or a risein the US tax rates.Using the line drawing tool​,draw a new AA line or DD line. Properly label this line.Carefully follow the instructions above and only draw the required object.As a result of temporary contractionaryfiscal​ policy, output will?and the exchange rate will?in the short run.

Answers

I can explain the expected changes in the AA and DD curves and how they may affect output and exchange rates in response to temporary contractionary fiscal policy.

Temporary contractionary fiscal policy, through a decline in government spending or a rise in tax rates, is expected to reduce the aggregate demand in the economy. As a result, the DD (domestic demand) curve is likely to shift leftward. This shift will result in a new equilibrium point where the AA (asset accumulation) curve intersects the new DD curve.

The new AA-DD equilibrium point is expected to have a lower level of output and a lower exchange rate compared to the previous equilibrium point. The decrease in output is due to the reduction in aggregate demand caused by the contractionary fiscal policy. The decrease in the exchange rate is due to the decrease in output, which reduces the demand for domestic currency and increases the demand for foreign currency.

To learn more about temporary contractionary fiscal policy, click here:

https://brainly.com/question/31413744

#SPJ11

a) why do you think make-to-stock and make-to-order systems require different types of supply contracts?

Answers

Make-to-stock and make-to-order systems require different types of supply contracts because they have different production processes and inventory management needs.


In a make-to-stock system, products are produced in anticipation of customer demand. The manufacturer holds inventory of finished products, ready to be shipped as soon as an order is placed. In this case, the manufacturer needs a steady supply of raw materials and components to keep up with production demands. The supply contract should ensure that the manufacturer receives a consistent supply of high-quality materials at a reasonable price, with minimal lead time.

On the other hand, in a make-to-order system, products are only produced when an order is received. The manufacturer does not hold inventory of finished products and instead focuses on creating customized products based on customer specifications. In this case, the manufacturer needs a flexible supply chain that can quickly adapt to changing customer demands. The supply contract should be able to provide raw materials and components quickly, with short lead times and the ability to scale up or down production as needed.

In summary, make-to-stock systems require a stable and reliable supply of raw materials, while make-to-order systems require a flexible and responsive supply chain. The supply contracts for each system must be tailored to meet these specific needs.

To know more about supply, visit https://brainly.com/question/1222851

#SPJ11

How does a Distributed Denial of Service attack commonly differ from other types of Denial of Service attacks?
Select one:
a. Distributed Denial of Service attacks are often done by just one infected computer
b. Distributed Denial of Service attacks are often executed through the use of a botnet that attacks a victim selected by a malicious user
c. Distributed Denial of Service attacks target more than one computer at a time
d. All of the above

Answers

A Distributed Denial of Service (DDoS) attack commonly differs from other types of Denial of Service (DoS) attacks by being executed through the use of a botnet, which is controlled by a malicious user. Rather than relying on just one infected computer, DDoS attacks target multiple computers simultaneously, overwhelming a victim's resources and causing service disruptions. Therefore, the correct option is (b) Distributed Denial of Service attacks are often executed through the use of a botnet that attacks a victim selected by a malicious user.

      DDoS attacks differ from other types of DoS attacks in several ways. One significant distinction is that DDoS attacks leverage a botnet, which is a network of compromised computers or devices under the control of an attacker. These infected machines, known as bots or zombies, are used to flood the victim's network or servers with a massive volume of traffic.

The botnet allows the attacker to distribute the attack across multiple sources, making it more challenging to mitigate and trace back to a single attacker. By coordinating the attack through a botnet, the malicious user can amplify the impact of the DDoS attack, overwhelming the victim's resources and causing service disruptions.

In contrast, other types of DoS attacks typically involve a single computer or a small group of computers directly targeting a victim. These attacks rely on exhausting the victim's resources, such as bandwidth, processing power, or memory, to disrupt the availability of their services. However, they do not have the distributed nature or the amplification capabilities that are characteristic of DDoS attacks.

In summary, the key difference between a Distributed Denial of Service (DDoS) attack and other types of Denial of Service (DoS) attacks is that DDoS attacks are executed through the use of a botnet controlled by a malicious user. By utilizing multiple compromised computers, DDoS attacks overwhelm the victim's resources and cause disruptions. This distinction makes option (b) correct: Distributed Denial of Service attacks are often executed through the use of a botnet that attacks a victim selected by a malicious user.

To learn more about botnet click here : brainly.com/question/31181635

#SPJ11

Which of the following best describes the relationship between price​ (P), marginal revenue​ (MR), and total revenue​ (TR) for a​ monopolist?
A. When MR is​ rising, TR is​ rising, and when MR is​ falling, TR is falling.
B. When MR is​ positive, TR is​ rising, and when MR is​ negative, TR is falling.
C. As MR​ falls, TR rises.
D. They are all equal for a monopolist.

Answers

Answer:

Explanation:

The correct answer is B. When MR is positive, TR is rising, and when MR is negative, TR is falling.

For a monopolist, marginal revenue (MR) represents the change in total revenue (TR) resulting from selling one additional unit of a product. The relationship between price (P), MR, and TR is important to understand.

When MR is positive, it means that the revenue gained from selling an additional unit is greater than the cost of producing that unit. As a result, selling more units increases total revenue (TR).

When MR is negative, it means that the revenue gained from selling an additional unit is less than the cost of producing that unit. Selling more units in this case would decrease total revenue (TR).

Therefore, when MR is positive, TR is rising, and when MR is negative, TR is falling. This relationship helps the monopolist make pricing and production decisions to maximize their profits.

know more about revenue: brainly.com/question/27325673

#SPJ11

what is the goal of the isolation management strategy? quizlett

Answers

The goal of the isolation management strategy is to prevent the spread of infectious diseases or pathogens by isolating individuals who are infected or suspected of being infected.

Isolation is a public health practice that involves separating and restricting the movement of individuals to prevent the transmission of infectious agents to others.

The key objectives of isolation management include:

Protecting others: Isolation helps to protect individuals who are not infected from coming into contact with the infectious agent. By isolating infected individuals, the risk of transmission is minimized, reducing the spread of the disease within the community or healthcare settings.

Controlling outbreaks: Isolation plays a crucial role in controlling outbreaks of infectious diseases. By identifying and isolating infected individuals promptly, the spread of the disease can be contained, preventing further cases and reducing the impact on public health.

Providing appropriate care: Isolation allows healthcare providers to deliver specialized care to infected individuals while minimizing the risk of transmission to healthcare workers and other patients. It ensures that infected individuals receive the necessary medical attention and treatment in a controlled environment.

Limiting exposure: Isolation management aims to limit the exposure of individuals to infectious agents. This includes implementing infection control measures such as hand hygiene, wearing personal protective equipment, and maintaining a clean and safe environment.

Overall, the goal of the isolation management strategy is to break the chain of transmission, protect public health, and provide optimal care to infected individuals while preventing the spread of infectious diseases.

Learn more about Isolation management here -: brainly.com/question/29586507

#SPJ11

Which of the following can be considered as a good alternative to back up data and applications?
Multiple Choice:
a. Continuous monitoring
b. Disaster recovery planning
c. Business continuity management
d. Cloud computing

Answers

Among the given options, cloud computing can be considered a good alternative to backup data and applications.  The correct answer is option d.

Cloud computing refers to the practice of storing and accessing data and applications over the internet rather than on a local computer or server. This allows for easy backup and restoration of data and applications in case of a system failure or disaster.

Cloud computing provides several advantages over traditional backup methods, such as tape backups or physical hard drives. Firstly, it allows for easy and automatic backup, ensuring that data is always up-to-date and accessible.

Secondly, it provides offsite storage, which reduces the risk of losing data in the event of a physical disaster or theft. Thirdly, it provides scalability, allowing businesses to easily increase or decrease their storage needs based on their requirements.

Overall, cloud computing is a reliable and convenient option for backing up data and applications, making it a good alternative to traditional backup methods.

The correct answer is option d.

To know more about cloud computing refer to-

https://brainly.com/question/29737287

#SPJ11

Which of the following statements about the two basic leader behaviors that are central to successful leadership is true?
a.
These behaviors are referred to as initiating structure and consideration.
b.
These behaviors are dependent, meaning that leaders can only do one at a time.
c.
The worst leadership style entails the use of both behaviors in equal amounts.
d.
The best leadership style entails high levels of both of these behaviors.
e.
Most effective leaders select one behavior, adopt it, and maintain that style of leadership for their entire career

Answers

The statement that is true regarding the two basic leader behaviors that are central to successful leadership is that these behaviors are referred to as initiating structure and consideration.

Option a is the correct answer. The two basic leader behaviors that are central to successful leadership are commonly referred to as initiating structure and consideration. Initiating structure refers to a leader's ability to define roles, set goals, establish procedures, and organize work to achieve those goals. Consideration, on the other hand, relates to a leader's ability to show support, concern, and respect for their team members' needs, well-being, and personal development. Option b is incorrect because these two behaviors are not dependent on each other, and leaders can exhibit both behaviors simultaneously or independently, depending on the situation and the needs of their team. Option c and d are incorrect because there is no specific "worst" or "best" leadership style that entails the use of both initiating structure and consideration in equal amounts or high levels. The effectiveness of leadership styles depends on various factors, including the specific situation, organizational culture, and individual characteristics. Option e is incorrect because effective leaders often adapt their leadership styles based on the circumstances and the needs of their team. They may employ different combinations of initiating structure and consideration behaviors depending on the situation, tasks, and individuals involved.

Learn more about leadership here:

https://brainly.com/question/13379587?

#SPJ11

employee development is not as critical as in the past because most employees have higher levels of education than ten years ago. T/F

Answers

False. Employee development remains critical, even with higher levels of education among employees compared to ten years ago. While education provides a foundational knowledge base, employee development goes beyond formal education and encompasses continuous learning, skill enhancement, and professional growth. Here's why:

Education alone does not guarantee the acquisition of specific job-related skills or the ability to adapt to evolving industries. Employee development plays a crucial role in nurturing leadership qualities, effective communication, problem-solving skills, and teamwork.

In summary, while higher education levels may provide a solid foundation, employee development remains critical to bridge skill gaps, foster continuous learning, and enhance soft skills necessary for professional success in a rapidly changing and competitive work environment

To learn more about Soft Skills click here:

brainly.com/question/30766250

#SPJ11

Vintage, inc. has a total asset turnover of 0.58 and a net profit margin of 4.81 percent. the total assets to equity ratio for the firm is 2.0. calculate vintage’s return on equity

Answers

Vintage Inc.'s return on equity is 5.59%. Return on equity (ROE) can be calculated using the DuPont Model formula which breaks down ROE into three components:

net profit margin (NPM), total asset turnover (TAT), and financial leverage (FL).

ROE = NPM x TAT x FL

Given that Vintage Inc. has a total asset turnover of 0.58 and a net profit margin of 4.81 percent, we can calculate the third component, financial leverage, using the total assets to equity ratio of 2.0.

FL = Total assets / Equity = 2.0

ROE = 0.0481 x 0.58 x 2.0 = 0.05588 or 5.59%

Therefore, Vintage Inc.'s return on equity is 5.59%.

ROE is a measure of how efficiently a company uses its equity to generate profits. Vintage Inc.'s ROE of 5.59% means that for every dollar of equity invested in the company, it generated 5.59 cents in profit. It is important to note that ROE alone cannot determine the financial health of a company and should be analyzed in conjunction with other financial ratios and metrics.

To know more about return on equity click here

brainly.com/question/27821130

#SPJ11

six sigma quality implies how many average defects per million? 6 3.4 2600 6σ 3σ

Answers

Six Sigma quality implies an average of 3.4 defects per million opportunities (DPMO). This level of quality is achieved by reducing process variation and striving for near-perfect performance. The term "Sigma" refers to the standard deviation of a process, and Six Sigma corresponds to a process that operates with six standard deviations between the mean and the nearest specification limit.

The concept of Six Sigma is based on the statistical understanding that within six standard deviations of the mean, there is a negligible amount of defects or errors. This translates to a defect rate of 3.4 parts per million (ppm) or 0.00034%.

To calculate DPMO, we use the formula:

DPMO = (Number of defects / Number of opportunities) x 1,000,000

For Six Sigma quality, we assume 3.4 defects per million opportunities, so:

DPMO = (3.4 / 1,000,000) x 1,000,000 = 3.4

Six Sigma quality signifies an exceptionally low defect rate of 3.4 defects per million opportunities. Achieving this level of quality requires a rigorous focus on process improvement, reducing variation, and eliminating defects to deliver products or services with a high level of customer satisfaction.

Learn more about the opportunities, visit:

brainly.com/question/29341508

#SPJ11

Regarding the Satyam, Peregrine, Simplified Employment Services and Stephan Winkler situations, it is accurate to say: a) All involved the improper use of audit confirmations for cash. b) Satyam and Stephan Winkler involved the improper use of audit confirmations for cash while Simplified Employment Services and Stephan Winkler involved lapping. c) Satyam and Peregrine involved the improper use of audit confirmations for cash while Simplified Employment Services involved kiting and Stephan Winkler involved lapping. d) None of the above.

Answers

Option c) is accurate to say regarding the Satyam, Peregrine, Simplified Employment Services, and Stephan Winkler situations. This option states that Satyam and Peregrine were involved in the improper use of audit confirmations for cash, while Simplified Employment Services involved kiting, and Stephan Winkler was involved lapping.

It is important to understand the terms involved in each of these situations. The improper use of audit confirmations for cash refers to a fraudulent practice where a company provides false information to its auditors by sending confirmation requests to fake vendors or customers, making it appear that the company has more cash than it actually does.

On the other hand, kiting involves the fraudulent manipulation of bank balances by transferring funds between accounts to create the appearance of a larger balance. Lapping refers to a scheme where an employee steals a payment from one customer and then covers it up by applying a subsequent payment from another customer to the first customer's account.

In summary, the accurate statement regarding the mentioned situations is that Satyam and Peregrine involved in the improper use of audit confirmations for cash, while Simplified Employment Services involved kiting, and Stephan Winkler was involved lapping.

Learn more about Simplified auditors : https://brainly.com/question/28409489

#SPJ11

FILL IN THE BLANK When companies set their promotion budgets to match​ competitor's outlays, they are using the​ __________ method.

Answers

When companies set their promotion budgets to match competitor's outlays, they are using the "competitive parity" method.

The competitive parity method involves setting promotion budgets based on the level of spending by competitors in the industry. In this approach, companies strive to match or maintain a similar promotional expenditure as their competitors. The rationale behind this method is that companies believe their competitors have a good understanding of the market and have allocated an appropriate budget to effectively reach their target audience. By aligning their promotion budgets with competitors, companies aim to maintain a competitive position and avoid being at a disadvantage in terms of marketing and advertising efforts.

However, it is important to note that relying solely on competitive parity may have limitations. Companies should consider their own unique marketing objectives, target audience, and competitive advantages when determining their promotion budgets. Simply matching competitors' outlays without considering these factors may result in a suboptimal allocation of resources. Therefore, it is essential for companies to evaluate their own marketing strategies and goals while also considering the actions of their competitors.

To learn more about "competitive parity" method click here: brainly.com/question/31860244


#SPJ1

Other Questions
(a) A negative feedback DC motor speed controller is required to maintain a speed of 1000 revolution per minute (RPM) with a varying mechanical load on the output shaft. The simplified transfer function (T. Fn.) for the motor is 150 RPM per amp. The power amplifier driving the motor has a T. Fn. of 55 amps per volt and the tachometer which provides the speed feedback information has a T. Fn. of 0.15V per RPM. i. Draw the block diagram of the motor system ii. What is the open loop gain of the system? iii. What is the closed loop gain of the system? iv. Calculate the required input demand voltage to set the output at 1650RPM which sentence uses the word "advantage" correctly the domain for the relation is zz. (a, b) is related to (c, d) if a c and b d. Emily is writing a research paper for her music class about the invention of the piano. Read the draft of the paper and complete the task thatfollows.The man who invented the piano was Bartolomeo Cristofori. He was born in Padua, Italy in 1655 and was an expert harpsichord maker. In 1688,the Medici family in Florence hired him to take care of their instrument collection.Cristofori built his first piano in 1700. Like many harpsichords, it had two keyboards, one above the other. But unlike any harpsichord, its keystriggered hammers that hit the strings instead of plucking them. Pressing hard on a key made the hammer hit the string hard. The sound was loud-an Italian forte. Touching a key lightly made the hammer hit the string lightly. The sound was soft-an Italian piano. People could now playkeyboard music with expression-loud, soft, or in between. Cristofori's new instrument was called a pianoforte.Cristofori continued to improve his invention. It finally caught on outside of Italy, when his plans were translated into German. Then it took theworld by storm. Everyone-including composers like Mozart-wanted to write and play piano music.There are three Cristofori pianos still in existence. One is in the United States. You can see it at the Metropolitan Museum of Art in New York City.In one or two paragraphs, write an introduction that both provides a clear focus (controlling idea, or thesis) for the text and sets up or explains thecontext for what is to follow. the outer portion of the rotation curve of a galaxy is mainly flat. this fact indicates that which of the following is an accurate statement of the principle of uniformitarianism as it is accepted today? he probability that a patient recovers from a stomach disease is 0.6. Suppose 20 people are known have contracted this disease: (Round your answers to three decimal places A. What the probability that exactly 12 recover? 0.1797 B. What the probubility that Icust 11 recover? 040440 C. What is the probability that at least 12 but not more than 17 recover? 0 5070 D. Whal the probability that at most 16 recover? 0,9840 You may need to use the appropriate appendix table or technology to answer this question photoreceptors that are specialized for daylight vision, fine acuity, and color are called consider the curve given by 2y^2 3xy=1 find dy/dx 1. If union is lobbying for stricter immigration rules. Determine the union model that uses this strategy to increase union workers wages.Group of answer choicescan't determineexclusive union modelinclusive union modeldemand-enhancement model "When the first automobile was invented in 1886, there was excitement about what this new machine meant for the future of travel, both near and far. In 1900, cars were considered luxury items, and only 8,000 were owned in the United States. Currently, over 253 million cars are driven on American roads. As the automobile became the main form of transportation in the United States, regulations about who could operate the cars soon followed."What is the authors point of view in the excerpt?A. third-person omniscientB. second personC. third-person limitedD. first person evaluate the following integral over the region d. (answer accurate to 2 decimal places). d 7(r2sin())rdrd d={(r,)0r5 cos(), 0 1 }. A circular aluminum sign has a radius of 28 centimeters. If a sheetof auminum costs $0. 33 per square centimeter, how much will it cost to buy the aluminum to make the sign? use 3. 14 to approximate pi. Show your work. [15pts] Paging. Consider a system where a memory access requires 100ns. Consider a memory reference made by the CPU, e.g., load variable X. Assume X is present in memory. (a) [5pts] If the system uses paging with one-level page table (without TLB), what is the memory reference latency? (b) [5pts] If the system uses paging with two-level page table (without TLB), what is the memory reference latency? (c) [5pts] If the system uses paging with TLB and the TLB access time is 5ns, what is the memory reference latency? Assume the referenced page has its mapping in the TLB. as a result of the price of tortilla chips increasing from $2.50 to $5.50, the quantity demanded of salsa falls from 5 cases to 3 cases. what is the cross-price elasticity of demand for salsa? Determine the convergence or divergence of the series. (If you need to use oo or -[infinity], enter INFINITY or -INFINITY, respectively.) (-1)"n = 1enlim n[infinity] 1/en a visualization that has high data-ink ratio is more effective than one that has a low ratioTrue/False PLEASE HELP QUICK ON TIME LIMIT the words are small so Ill write it out too .A construction crew is lengthening, a road that originally measured 9 miles. The crew is adding 1 mile to the road each day. Let L be the length in miles after D days of construction. Write an equation relating L to D. Then graph equation using the axes below.Please help !!! N2(g) + 3 H2(g) = 2 NH3(9) AH298 = -92.2 kJ/molrani AS298 = -198.8 J/(molznK) (a) The reaction of N (9) and H2(9) to form NH3(g) is represented above. The reaction has been studied in order to maximize the yield of NH3(9) (1) Calculate the value of AG', in kJ/molcan. at 298 K.Previous question Which of the following OSPF components is associated with the neighbor table?a. Dijkstras algorithmb. Link-State databasec. Routing protocol messagesd. Adjacency databasee. Forwarding database