Fish are the group of animals that would be most suitable for a study of ammonia excretion.
Ammonia is a toxic waste product that is produced by the breakdown of proteins and amino acids. Fish, like all aquatic animals, excrete ammonia directly into the surrounding water. This makes them ideal for studying ammonia excretion because it is a key part of their physiology.
Fish excrete ammonia through their gills, where it is diffused into the water. The amount of ammonia excreted depends on several factors, including the size and species of the fish, the water temperature, and the concentration of ammonia in the water. Studying fish in different environments can help scientists understand how these factors affect ammonia excretion rates.
Furthermore, fish are a diverse group of animals, with over 30,000 species worldwide. They inhabit a range of aquatic environments, from freshwater streams to deep-sea trenches. This diversity allows researchers to study ammonia excretion across a wide range of species and environments, providing a more complete picture of the process.
In conclusion, fish are the most suitable group of animals for studying ammonia excretion due to their aquatic lifestyle and the fact that they excrete ammonia directly into the water. Their diversity also allows for a more comprehensive understanding of ammonia excretion rates across different species and environments.
To learn more about ammonia:
https://brainly.com/question/8996096
#SPJ11
determine the halflife of a radionuclide if after 8.4 days the fraction of undecayeda. 1/8b. 1/128c. 1/32d. 1/512
a. the half-life of the radionuclide is: t1/2 = ln(2) / λ ≈ 32.5 days
b. the half-life of the radionuclide is: t1/2 = ln(2) / λ ≈ 8.65 days
c. the half-life of the radionuclide is: t1/2 = ln(2) / λ ≈ 16.3 days
d. the half-life of the radionuclide is: t1/2 = ln(2) / λ ≈ 4.1 days
The formula for calculating the half-life of a radionuclide is:
t1/2 = (ln 2) / λ
where t1/2 is the half-life and λ is the decay constant, which can be calculated from the fraction of undecayed material.
a. If the fraction of undecayed material is 1/8, then the fraction of decayed material is 1 - 1/8 = 7/8.
λ = ln(2) / t1/2 = ln(2) / (8.4 days * ln(8)) ≈ 0.0213 per day
7/8 = e^(-λ*t)
t = -ln(7/8) / λ ≈ 18.5 days
Therefore, the half-life of the radionuclide is:
t1/2 = ln(2) / λ ≈ 32.5 days
b. If the fraction of undecayed material is 1/128, then the fraction of decayed material is 1 - 1/128 = 127/128.
λ = ln(2) / t1/2 = ln(2) / (8.4 days * ln(128)) ≈ 0.0801 per day
127/128 = e^(-λ*t)
t = -ln(127/128) / λ ≈ 87.5 days
Therefore, the half-life of the radionuclide is:
t1/2 = ln(2) / λ ≈ 8.65 days
c. If the fraction of undecayed material is 1/32, then the fraction of decayed material is 1 - 1/32 = 31/32.
λ = ln(2) / t1/2 = ln(2) / (8.4 days * ln(32)) ≈ 0.0426 per day
31/32 = e^(-λ*t)
t = -ln(31/32) / λ ≈ 47.4 days
Therefore, the half-life of the radionuclide is:
t1/2 = ln(2) / λ ≈ 16.3 days
d. If the fraction of undecayed material is 1/512, then the fraction of decayed material is 1 - 1/512 = 511/512.
λ = ln(2) / t1/2 = ln(2) / (8.4 days * ln(512)) ≈ 0.169 per day
511/512 = e^(-λ*t)
t = -ln(511/512) / λ ≈ 14.6 days
Therefore, the half-life of the radionuclide is:
t1/2 = ln(2) / λ ≈ 4.1 days
For more question on half-life click on
https://brainly.com/question/29847690
#SPJ11
The correct answer is b. 1/128.
To determine the halflife of a radionuclide, we need to know the fraction of undecayed atoms remaining after a certain period of time. In this case, we are given that after 8.4 days, the fraction of undecayed atoms is 1/128.
The halflife is the amount of time it takes for half of the original amount of a radionuclide to decay. We can use the fraction of undecayed atoms to calculate the halflife as follows:
1/2 = (fraction of undecayed atoms)^(number of halflives)
We can rearrange this equation to solve for the halflife:
number of halflives = log(base 2)(fraction of undecayed atoms)
number of halflives = log(base 2)(1/128)
number of halflives = -7 (rounded to the nearest whole number)
Therefore, the halflife of the radionuclide is 8.4 days divided by 7 halflives, which is approximately 1.2 days.
Learn more about halflife click here:
https://brainly.com/question/16342496
#SPJ11
assume that you are provided with an 18 cm fractionating column having an hetp of 6 cm to distill a mixture of 84 % toluene and 16 % acetone. what would be the composition of toluene in the first drop of distillate?
The composition of the first drop of distillate would be 74% toluene and 26% acetone.
The first drop of distillate from an 18 cm fractionating column with a heat input of 6 cm can be calculated using the vapor-liquid equilibrium (VLE) data for toluene and acetone.
First, we need to find the vapor pressure of toluene at the boiling point of acetone (179.8 °C). The vapor pressure of a liquid is inversely proportional to its temperature, so we can use the vapor pressure of acetone at 179.8 °C as the vapor pressure of toluene at that temperature.
Next, we can use the VLE data to find the composition of the vapor and liquid phases at a given temperature and pressure. We can plot the vapor-liquid equilibrium data for toluene and acetone on a P-h diagram, where P is the pressure and h is the enthalpy. The composition of the vapor and liquid phases can be found at any point on the diagram.
To find the composition of the first drop of distillate, we need to assume that the column is initially filled with liquid toluene and that the first drop of distillate is collected when the vapor phase is saturated with toluene. This occurs at a point on the P-h diagram where the liquid and vapor phases are completely separated.
We can use the vapor-liquid equilibrium data to find the composition of the vapor phase at this point. Since the heat input is 6 cm, we can use the enthalpy of vaporization of toluene to find the composition of the vapor phase. The enthalpy of vaporization of toluene is approximately 81 kJ/kg.
We can then use the P-h diagram to find the composition of the liquid phase at this point. Since the heat input is 6 cm, we can use the enthalpy of vaporization of acetone to find the composition of the liquid phase. The enthalpy of vaporization of acetone is approximately 55 kJ/kg.
The composition of the first drop of distillate can then be calculated by subtracting the composition of the liquid phase from the composition of the vapor phase.
Therefore, the composition of the first drop of distillate can be calculated as follows:
Toluene in first drop = 1 - [(1 - 0.81) - (1 - 0.55)]
Toluene in first drop = 1 - 0.26
Toluene in first drop = 0.74
Therefore, the composition of the first drop of distillate would be 74% toluene and 26% acetone.
Learn more about acetone,
https://brainly.com/question/31838988
#SPJ4
You are given a white substance that melts at 100 °C. The substance is soluble in water. Neither the solid nor the solution is a conductor of electricity. Which type of solid (molecular, metallic, covalent-network, or ionic) might this substance be?
The given substance is a white solid that melts at 100°C, is soluble in water, and does not conduct electricity in either solid or dissolved forms. Based on these properties, it is most likely a molecular solid.
Molecular solids consist of individual molecules held together by intermolecular forces, such as van der Waals forces, dipole-dipole interactions, or hydrogen bonding. These forces are generally weaker than the bonds in metallic, covalent-network, or ionic solids, which often results in relatively low melting points. The 100°C melting point of the given substance suggests that it might be a molecular solid.
Additionally, molecular solids tend to be soluble in water, especially if they have polar molecules or can form hydrogen bonds with water. The solubility of the substance in question further supports the classification as a molecular solid.
Finally, molecular solids typically do not conduct electricity in either solid or dissolved forms. This is because they do not contain mobile electrons or ions that can move and carry an electric charge. Since the given substance does not conduct electricity, this characteristic also points to it being a molecular solid.
In summary, based on its melting point, solubility in water, and lack of electrical conductivity, the white substance is most likely a molecular solid.
To learn more about molecular solid, refer:-
https://brainly.com/question/15241125
#SPJ11
All of the following are the properties of metal except: a) Solid
b) Ductile
c) Malleable
d) Non Conducting
The exception of the properties of metal is "Non-Conducting." The correct answer is option d.
Metals are known to be good conductors of electricity and heat due to the presence of free electrons in their crystal lattice structure. These electrons can move freely throughout the metal, allowing for easy flow of electricity and heat. Additionally, metals are usually solid at room temperature, with a few exceptions such as mercury. They are also known for their malleability, which means they can be easily shaped or bent without breaking.
However, non-metallic materials such as plastics, ceramics, and glass do not possess these properties and are usually poor conductors of electricity and heat. In summary, while metals have a variety of properties that make them unique, being non-conducting is not one of them.
Therefore, the correct option is D.
For more such questions on metals:
https://brainly.com/question/28650063
#SPJ11
Solid." Metals are solid at room temperature in their elemental form, but some metals can be liquid or gaseous at high temperatures or under specific conditions.
Metals are characterized by their luster, ductility, malleability, high thermal and electrical conductivity, and are typically solid at room temperature. These properties are due to the unique arrangement of their valence electrons, which allows for a free flow of electrons within the metal lattice structure. While most metals are solid at room temperature, there are exceptions. For example, mercury is a liquid metal at room temperature, and some metals like cesium and gallium can be liquid or become liquid at slightly elevated temperatures. In summary, while being solid at room temperature is a common property of metals, it is not a defining characteristic.
Learn more about Metals are characterized here;
https://brainly.com/question/28205210
#SPJ11
When a stick is used to join two spheres, what is happening in real atoms?
Answer: The atoms are squished together
Explanation:
A metal which is expensive and used to make ornaments.
Answer:
Few metals among them:
Rhodium PlatinumGoldSilverExplanation:
Some metals that are expensive and used to make ornaments are:
Rhodium:
Rhodium is a rare, silvery-white, hard, corrosion-resistant transition metal. Rhodium is a noble metal and a member of the platinum group. It is one of the rarest and most valuable precious metals.Platinum
Platinum is a rare, silvery-white metal that is very durable and resistant to corrosion.It is often used in jewelry because of its beauty and longevity.Platinum is also used in a variety of other applications, such as dentistry and electronics.Gold
Gold is a yellow metal that is also very durable and resistant to corrosion.It is often used in jewelry because of its beauty and value.Gold is also used in a variety of other applications, such as dentistry and electronics.Silver
Silver is a white metal that is less durable than gold or platinum, but it is still a popular choice for jewelry.Silver is also used in a variety of other applications, such as tableware and photography.These are just a few of the many metals that are used to make ornaments. The specific metal that is used will depend on the desired look and durability of the ornament.
write the empirical formula of at least four binary ionic compounds that could be formed from the following ions:mg2 ,fe2 ,f-,s2-
The empirical formula of Magnesium Fluoride is; MgF₂, Iron(II) Sulfide is FeS, Magnesium Sulfide will be MgS, and Iron(II) Fluoride is FeF₂ for four binary ionic compounds that can be formed using the given ions.
To determine the empirical formula of binary ionic compounds, we need to combine the cation (positive ion) with the anion (negative ion) in the lowest whole number ratio that results in a neutral compound. Here are four examples using the given ions;
Magnesium Fluoride;
Cation; Mg²⁺
Anion; F⁻
To achieve a neutral compound, we need two fluoride ions to balance the charge of one magnesium ion.
Empirical Formula; MgF₂
Iron(II) Sulfide;
Cation; Fe²⁺
Anion; S²⁻
To balance the charges, we need one iron ion to combine with one sulfide ion.
Empirical Formula: FeS
Magnesium Sulfide;
Cation; Mg²⁺
Anion; S²⁻
To achieve a neutral compound, we need one magnesium ion to combine with one sulfide ion.
Empirical Formula: MgS
Iron(II) Fluoride;
Cation; Fe²⁺
Anion; F⁻
To balance the charges, we need two fluoride ions to combine with one iron ion.
Empirical Formula; FeF₂
To know more about empirical formula here
https://brainly.com/question/14425592
#SPJ4
Sufficient strong acid is added to a solution containing na2hp04 to neutrahze one-half of it. what wul be the ph of this solution?
The chemical formula for sodium dihydrogen phosphate is Na₂HPO₄. When Na₂HPO₄ dissolves in water, it undergoes a hydrolysis reaction and produces H3O⁺ and HPO₄⁻² ions:
Na₂HPO₄ + H₂O → 2 Na⁺ + H3O⁺ + HPO₄⁻²
HPO₄⁻² can act as both an acid and a base. In water, it can donate a proton to water to form H2PO4- and OH-:
HPO₄²⁻ + H₂O ↔ H₂PO₄⁻ + OH⁻
It can also accept a proton from water to form H₂PO₄⁻ and H3O⁺:
HPO₄²⁻ + H₂O ↔ H₂PO₄⁻ + H₃O⁺
When a sufficient amount of strong acid is added to the solution containing Na₂HPO₄ to neutralize one-half of it, it means that half of the HPO₄²⁻ ions have reacted with the added acid and have been converted to H₂PO₄⁻ ions.The other half of the HPO₄²⁻ ions are still present in the solution.
The reaction between HPO₄²⁻ and a strong acid, such as HCl, is:
HPO₄²⁻ + HCl → H₂PO₄⁻ + Cl⁻
The HPO₄²⁻ ions that react with the added acid will no longer be able to act as either an acid or a base, and the remaining HPO₄²⁻ ions will act as a weak base. Therefore, the pH of the solution will depend on the dissociation constant of HPO₄²⁻ as a base.
The dissociation constant of HPO₄²⁻ as a base is given by:
[tex]K_b=k_w/k_a[/tex]
where [tex]K_w[/tex] is the base dissociation constant, [tex]K_w[/tex] is the ion product constant of water (1.0 x 10^-14 at 25°C), and [tex]K_a[/tex] is the acid dissociation constant of H2PO₄²⁻ (6.2 x 10^-8 at 25°C).
Substituting the values, we get:
[tex]K_b=K _w/K _a[/tex]= (1.0 x 10^-14)/(6.2 x 10^-8) = 1.6 x 10^-7
The base ionization constant expression for HPO₄²⁻ is:
[tex]K_b[/tex] = [HPO₄²⁻][OH⁻]/[H₂PO₄²⁻]
At half-neutralization, the concentration of HPO₄²⁻ ions remaining in solution is equal to the initial concentration of Na₂HPO₄ divided by 2. Let's assume that the initial concentration of Na₂HPO₄ is C.
Therefore, the concentration of HPO₄²⁻ ions remaining in solution after half-neutralization is C/2.
At equilibrium, the concentration of H₂PO₄⁻ ions is also C/2, and the concentration of OH⁻ ions can be calculated using the Kb expression:
[tex]K_b[/tex] = [HPO₄²⁻][OH⁻]/[H₂PO₄⁻]
1.6 x 10⁻⁷= (C/2)(OH⁻)/(C/2)
OH⁻ = 1.6 x 10⁻⁷ M
The pH of the solution can be calculated using the relation:
pH = 14 - pOH
pOH = -log[OH⁻] = -log(1.6 x 10⁻⁷) = 6.8
pH = 14 - 6.8 = 7.2
Therefore, the pH of the solution will be 7.2 after sufficient strong acid is added to a solution containing Na₂HPO₄ to neutralize one-half of it.
To know more about refer sodium dihydrogen phosphate here
brainly.com/question/10559079#
#SPJ11
starting with benzene and using any other reagents of your choice, devise a synthesis for acetaminophen:
Using benzene, nitric acid, and sulfuric acid, the synthesis of acetaminophen involves these steps:
NitrationReductionAcetylationHydrolysisHow does the synthesis of acetaminophen process?One possible synthesis route for acetaminophen (paracetamol) starting from benzene involves several steps:
Nitration: Benzene can be nitrated using a mixture of concentrated nitric acid (HNO₃) and sulfuric acid (H₂SO₄) as a catalyst. This reaction introduces a nitro group (-NO₂) onto the benzene ring to form nitrobenzene.Reduction: The nitro group in nitrobenzene can be reduced to an amino group (-NH₂) using a reducing agent like iron and hydrochloric acid (Fe/HCl). This step forms aniline.Acetylation: Aniline is then acetylated by treating it with acetic anhydride and a weak acid catalyst like phosphoric acid (H₃PO₄). This reaction replaces the amino group with an acetyl group (-COCH₃), resulting in the formation of acetanilide.Hydrolysis: Acetanilide can be hydrolyzed using a strong acid or base. Treatment with an acidic solution (e.g., hydrochloric acid) will convert acetanilide into acetaminophen.Learn more about paracetamol synthesis here https://brainly.com/question/9917622
#SPJ11
Potentially harmful reactive oxygen species produced in mitochondria are activated by a set of protective enzymes, including superoxide dismutase and glutathione peroxidase. true or false?
The statement, "Potentially harmful reactive oxygen species produced in mitochondria are activated by a set of protective enzymes, including superoxide dismutase and glutathione peroxidase." is: True.
Reactive oxygen species (ROS) are highly reactive molecules that can damage cellular components, including DNA, proteins, and lipids, leading to cell death and contributing to the development of various diseases.
Mitochondria are a major source of ROS production in the cell. However, the cell has a set of protective enzymes, including superoxide dismutase and glutathione peroxidase, that work to neutralize ROS and prevent damage.
Superoxide dismutase converts the superoxide anion into hydrogen peroxide, which is then converted into water and oxygen by glutathione peroxidase. Glutathione peroxidase also converts lipid peroxides into less reactive molecules.
These enzymes act as a defense system against ROS, keeping their levels in check and protecting the cell from damage. However, if ROS levels become too high, the protective enzymes may become overwhelmed, leading to oxidative stress and cellular damage.
To know more about "Reactive oxygen" refer here:
https://brainly.com/question/24243780#
#SPJ11
calculate the vapor pressure in a sealed flask containing 55.0 g of ethylene glycol, c2h6o2, dissolved in 155 g of water at 25.0°c. the vapor pressure of pure water at 25.0°c is 23.8 torr.
The vapor pressure in the flask is 21.6 torr. When a non-volatile solute is dissolved in a solvent, the vapor pressure of the solution is less than the vapor pressure of the pure solvent.
This is known as Raoult's law. The vapor pressure of a solution can be calculated using the following equation:
P =[tex]X_{solvent}[/tex] * [tex]P^{o}_{solvent}[/tex]
where P is the vapor pressure of the solution, [tex]X_{solvent}[/tex] is the mole fraction of the solvent, and [tex]P^{o}_{solvent}[/tex] is the vapor pressure of the pure solvent.
In this case, we need to calculate the mole fraction of water in the solution: moles of water = mass of water / molar mass of water = 155 g / 18.02 g/mol = 8.60 mol, moles of ethylene glycol = mass of ethylene glycol / molar mass of ethylene glycol = 55.0 g / 62.07 g/mol = 0.887 mol
Total moles of solute and solvent = 8.60 + 0.887 = 9.487 mol
Mole fraction of water = 8.60 / 9.487 = 0.906
Mole fraction of ethylene glycol = 0.094
The vapor pressure of water at 25°C is 23.8 torr. [tex]P_{water}[/tex] = [tex]X_{water}[/tex] * [tex]P^{o}_{water}[/tex] = 0.906 * 23.8 torr = 21.6 torr
Therefore, the vapor pressure in the flask is 21.6 torr.
To know more about Raoult's law, refer here:
https://brainly.com/question/28304759#
#SPJ11
What element is being oxidized in the following redox reaction? Ni 2+(aq) + NH4 + (aq) → Ni(s) + NO3-(aq) N H O Ni
In the given redox reaction, Ni2+(aq) + NH4+(aq) → Ni(s) + NO3-(aq), the element being oxidized is nitrogen (N) .
In the given redox reaction, nickel (Ni) is being oxidized. This can be identified by the fact that the oxidation state of Ni changes from +2 in the Ni2+ ion to 0 in the solid Ni. This means that Ni is losing electrons and becoming more positive, which is characteristic of oxidation in a redox reaction. The ammonium ion (NH4+) is being reduced because it is gaining electrons and its oxidation state is changing from +1 to 0 in the formation of solid Ni. Overall, this reaction is a combination of oxidation and reduction processes, which is why it is called a redox reaction.
Learn more about redox reaction here:
https://brainly.com/question/28300253
#SPJ11
Aluminum Hydroxide reaction with Sulfuric Acid to form Aluminum sulfate and water. If 32. 5 grams of Aluminum
Hydroxide and 19. 5 grams of Sulfuric acid are used for the formation of Aluminum sulfate, which reactant is the Limiting
Reagent?
Sulfuric acid produces less amount of Aluminum Sulfate (22.5 g) compared to Aluminum Hydroxide (35.6 g), it is the limiting reagent. Therefore, sulfuric acid is the limiting reagent in the given reaction.
Limiting reagent is the reactant that is completely consumed and determines the amount of product formed. The reactant that is not completely used up is the excess reagent. The balanced chemical equation of the reaction between aluminum hydroxide and sulfuric acid to form aluminum sulfate and water is given as follows:2Al(OH)3 + 3H2SO4 → Al2(SO4)3 + 6H2OTo determine which reactant is the limiting reagent, we need to calculate the amount of product formed by using both reactants and compare the values.
Using the given masses, we can calculate the number of moles of each reactant as follows:
Number of moles of Aluminum Hydroxide = 32.5 g / (78.0 g/mol) = 0.4167 mol
Number of moles of Sulfuric acid = 19.5 g / (98.0 g/mol) = 0.1985 mol
Now, we need to determine which reactant produces less amount of product by calculating the amount of product formed by each reactant.
Let's consider Aluminum Hydroxide as the first reactant.
Number of moles of Aluminum Hydroxide = 0.4167 mol
According to the balanced chemical equation, 2 moles of Aluminum Hydroxide produces 1 mole of Aluminum Sulfate.
Amount of Aluminum Sulfate produced = (0.4167 mol / 2 mol) x (342.2 g/mol) = 35.6 g
Now, consider Sulfuric acid as the first reactant.
Number of moles of Sulfuric acid = 0.1985 molAccording to the balanced chemical equation, 3 moles of Sulfuric acid produces 1 mole of Aluminum Sulfate.
Amount of Aluminum Sulfate produced = (0.1985 mol / 3 mol) x (342.2 g/mol) = 22.5 g
To learn more about limiting reagent , refer:-
https://brainly.com/question/31171741
#SPJ11
Which of the following is the correct IUPAC name for the tertbutyl substituent?
a. (1,1-dimethylethyl)
b. (1,1,1-trimethyl)
c. (1-methyl-2-propyl)
d. 2-methyl-2-propyl)
The correct IUPAC name for the tertbutyl substituent is a. (1,1-dimethylethyl). This is because the tertbutyl group is a branched alkyl group with four carbon atoms.
The prefix "tert-" indicates that the carbon atom attached to the rest of the molecule is attached to three other alkyl groups. The prefix "but-" indicates that the group has four carbon atoms, and the suffix "-yl" indicates that it is an alkyl group. The prefix "1,1-dimethyl-" indicates that there are two methyl groups attached to the first carbon atom of the butyl group. Therefore, the correct IUPAC name for the tertbutyl substituent is (1,1-dimethylethyl).
It is important to know the correct IUPAC name of a molecule or substituent because it provides a standardized way of naming compounds, which allows chemists to communicate effectively and avoid confusion. The IUPAC naming system is based on a set of rules that can be applied to any organic compound, allowing for easy identification and classification of different compounds.
To learn more about IUPAC, refer:-
https://brainly.com/question/16631447
#SPJ11
the conversion of 4-pentanoylbiphenyl to 4-pentanylbiphenyl with hydrazine and potassium hydroxide is an overall of carbon? a. oxidation b. not a redox c. reduction
The conversion of 4-pentanoylbiphenyl to 4-pentanylbiphenyl with hydrazine and potassium hydroxide is a reduction . Option c. is correct.
Because it involves the addition of hydrogen atoms to the carbon atoms in the molecule, resulting in a decrease in the oxidation state of the carbons. During the reaction, hydrazine acts as a reducing agent and reduces the ketone group (-[tex]CO^-[/tex]) to an alcohol group (-[tex]CH_2OH[/tex]). This reduction results in the conversion of the carbonyl carbon from sp2 hybridization to sp3 hybridization, resulting in the formation of a new C-H bond.
Therefore, the reaction involves a gain of electrons by the carbonyl carbon, and a reduction of the ketone functional group. There is no simultaneous oxidation of any other species in the reaction.
Therefore, the reaction is a reduction and not an oxidation or a non-redox reaction. Hence, option c. is correct.
To know more about Reduction refer here :
https://brainly.com/question/4222605
#SPJ11
What is the pH?
Show work
100. 0 mL of 0. 10 F H3PO4 is mixed with 200. 0 mL 0. 15 M NaOH.
250. 0 mL of 0. 10 M HA (Ka = 1. 0 x 10-4) is mixed with 100. 0 mL 0. 25 M KOH.
100. 0mLof0. 10MHA(Ka =1. 0x10-4)ismixedwith100. 0mLof 0. 050 M NaA
The pH of 100.0 mL of 0.10 M H₃PO₄ is mixed with 200.0 mL of 0.15 M NaOH is 1.00.
a) To determine the pH of the resulting solution, we need to calculate the concentration of the hydronium ion (H₃O⁺) using the concept of acid-base neutralization. The balanced equation for the reaction between H₃PO₄ and NaOH is:
H₃PO₄ + 3NaOH → Na₃PO₄ + 3H₂O
Since H₃PO₄ is a triprotic acid, we can assume that it completely dissociates in water. Therefore, the moles of H₃PO₄ can be calculated as follows:
Moles of H₃PO₄ = (0.10 mol/L) × (0.100 L) = 0.010 mol
To find the concentration of H₃O⁺, we need to consider the stoichiometry of the reaction. In the balanced equation, we see that for every mole of H₃PO₄, three moles of H₃O⁺ are produced. Therefore, the concentration of H₃O⁺ in the resulting solution is:
[H₃O⁺] = (3 × 0.010 mol) / (0.100 L + 0.200 L) = 0.030 mol / 0.300 L = 0.10 M
The pH can be calculated using the formula: pH = -log[H₃O⁺]
pH = -log(0.10) ≈ 1.00
Therefore, the pH of the resulting solution is approximately 1.00.
b) To determine the pH of the resulting solution, we need to consider the reaction between the weak acid (HA) and the strong base (KOH). The balanced equation for this reaction is:
HA + KOH → K⁺ + A⁻ + H₂O
Since HA is a weak acid, it will only partially dissociate in water. We need to consider the initial concentration of HA, the amount of KOH added, and the resulting volume of the solution.
First, let's calculate the moles of HA:
Moles of HA = (0.10 mol/L) × (0.250 L) = 0.025 mol
Next, let's calculate the moles of KOH:
Moles of KOH = (0.25 mol/L) × (0.100 L) = 0.025 mol
Since the moles of KOH are equal to the moles of HA, they will react completely in a 1:1 ratio, resulting in the formation of the potassium salt (K⁺A⁻) and water (H₂O).
The total volume of the resulting solution is the sum of the volumes of HA and KOH:
Total volume = 250.0 mL + 100.0 mL = 350.0 mL = 0.350 L
To determine the concentration of the resulting solution, we divide the moles of the species formed by the total volume:
Concentration of K⁺A⁻ = (0.025 mol) / (0.350 L) ≈ 0.0714 M
Since we have a salt in the solution, we can assume complete dissociation of the salt into its respective ions. Therefore, the concentration of the hydronium ion (H₃O⁺) will be equal to the concentration of the hydroxide ion (OH⁻) due to the neutralization reaction.
Now, let's calculate the concentration of H₃O⁺:
[H₃O⁺] = [OH⁻] = 0.0714 M
Finally, we can calculate the pH using the formula: pH = -log[H₃O⁺]:
pH = -log(0.0714) ≈ 1.15
Therefore, the pH of the resulting solution is approximately 1.15.
c) To determine the pH of the resulting solution, we need to consider the reaction between the weak acid (HA) and the weak base (A⁻). The balanced equation for this reaction is:
HA + A⁻ ⇌ H₂A
Since HA is a weak acid with a given Kₐ value, we can assume that it partially dissociates in water. The initial concentrations of HA and A⁻, as well as the resulting volume of the solution, are given.
First, let's calculate the moles of HA:
Moles of HA = (0.10 mol/L) × (0.100 L) = 0.010 mol
Next, let's calculate the moles of A⁻:
Moles of A⁻ = (0.050 mol/L) × (0.100 L) = 0.005 mol
Now, let's determine the concentrations of HA and A⁻ in the resulting solution:
[H₃A] = (moles of HA) / (total volume) = 0.010 mol / (0.100 L + 0.100 L) = 0.050 M
[HA] = (moles of A⁻) / (total volume) = 0.005 mol / (0.100 L + 0.100 L) = 0.025 M
Since HA and A⁻ have a 1:1 stoichiometric ratio, the concentrations of H₃A and HA are the same in the resulting solution.
To determine the concentration of the hydronium ion (H₃O⁺), we need to consider the dissociation of HA. The Kₐ expression for HA is:
Kₐ = [H₃O⁺] [A⁻] / [HA]
Given that Kₐ = 1.0 x 10⁻⁴ and the concentration of A⁻ is equal to the concentration of H₃A, we can rewrite the equation as:
(1.0 x 10⁻⁴) = (x)² / (0.025)
Solving for x (the concentration of H₃O⁺), we find:
x = √(1.0 x 10⁻⁴) × √(0.025) ≈ 0.0032 M
Now, we can calculate the pH using the formula: pH = -log[H₃O⁺]:
pH = -log(0.0032) ≈ 2.5
Therefore, the pH of the resulting solution is approximately 2.5.
The correct question is :
What is the pH?
100.0 mL of 0.10 M H₃PO₄ is mixed with 200.0 mL of 0.15 M NaOH.
250.0 mL of 0.10 M HA (Kₐ = 1. 0 x 10⁻⁴) is mixed with 100.0 mL of 0.25 M KOH.
100.0 mL of 0. 10 M HA (Kₐ =1. 0x10⁻⁴) is mixed with 100.0 mLof 0.050 M NaA
To know more about pH follow the link:
https://brainly.com/question/2288405
#SPJ4
zn(s) hgo(s) h2o zn(oh)2(s) hg(l) identify the oxidation and reduction.
The oxidation and reduction is happening to Zn and Hg respectively.
In order to identify the oxidation and reduction in this reaction, we need to look at the changes in oxidation state of the elements involved.
Starting with the reactants, we have Zn(s) and HgO(s). Zn has an oxidation state of 0, while Hg in HgO has an oxidation state of +2. In the products, we have Zn(OH)2(s) and Hg(l). Zn in Zn(OH)₂ has an oxidation state of +2, while Hg in Hg(l) has an oxidation state of 0.
From this, we can see that Zn has been oxidized from an oxidation state of 0 to +2, while Hg has been reduced from an oxidation state of +2 to 0. Therefore, the oxidation half-reaction is:
Zn(s) -> Zn(OH)₂(s) + 2e⁻
And the reduction half-reaction is:
HgO(s) + 2e⁻ -> Hg(l) + O2⁻(aq)
So in summary, the oxidation is happening to Zn and the reduction is happening to Hg.
To know more about oxidation and reduction, refer
https://brainly.com/question/13182308
#SPJ11
order the following chemical elements according to how important they are based on life on earth. -carbon -oxygen -phosphorus -iron -selenium -uranium.
The ranking of chemical elements based on their importance for life on Earth would be carbon, oxygen, phosphorus, iron, selenium, and uranium, with carbon and oxygen being the most vital elements for sustaining life.
Carbon is the most crucial element for life on Earth. It forms the backbone of organic molecules, including carbohydrates, lipids, proteins, and nucleic acids, which are essential for cellular structures and functions.
Oxygen comes next in importance as it is necessary for cellular respiration, the process by which organisms generate energy. Phosphorus is another vital element as it is a key component of DNA, RNA, and ATP, which are involved in genetic information storage, protein synthesis, and energy transfer.
Iron plays a critical role in oxygen transport within the body as it is a key component of hemoglobin, the protein responsible for carrying oxygen in red blood cells. Selenium is an essential trace element that acts as a cofactor for various enzymes involved in antioxidant defense and thyroid hormone metabolism.
While not directly involved in biochemical processes crucial for life, uranium is present in trace amounts in Earth's crust and has some natural occurrence and geological significance.
Learn more about Carbon here:
https://brainly.com/question/13046593
#SPJ11
calculate the hydronium ion concentration of a solution in which the concentration of nah2po4 is 0.25m and the concentration of na2hpo4 is 0.45 m. the ka for h2po4- is 6.2*10-8
The concentration of[tex]H_{3} O[/tex]+ ions in the solution is 7.1 × [tex]10^{-5}[/tex] M
Sodium phosphate ([tex]NaH_{2} PO_{4}[/tex]) is an acidic salt that can hydrolyze in water to produce [tex]H_{3} O[/tex]+ ions. The overall reaction for the hydrolysis of [tex]NaH_{2} PO_{4}[/tex] can be represented as follows:
[tex]NaH_{2} PO_{4}[/tex] + [tex]H_{2} O[/tex] ⇌ [tex]H_{3} O[/tex]+ + [tex]H_{2} PO_{4}^{2-}[/tex]
The Ka for the [tex]H_{2} PO_{4}[/tex]- ion can be used to calculate the concentration of [tex]H_{3} O[/tex]+ ions produced in the solution. The balanced chemical equation for the dissociation of [tex]H_{2} PO_{4}[/tex]can be written as:
[tex]H_{2} PO_{4}[/tex]- + [tex]H_{2} O[/tex] ⇌ [tex]H_{3} O[/tex]+ + [tex]PO_{4}^{3-}[/tex]
Let x be the concentration of [tex]H_{3} O[/tex]+ ions produced by the hydrolysis of [tex]NaH_{2} PO_{4}[/tex]. Then, the concentration of [tex]H_{2} PO_{4}[/tex]- ions in the solution will be (0.25 - x) M, and the concentration of [tex]PO_{4}^{3-}[/tex]- ions will be x M. The equilibrium constant expression for the dissociation of[tex]H_{2} PO_{4}[/tex]- is:
Ka = [[tex]H_{3} O[/tex]+][[tex]PO_{4}^{3-}[/tex]-]/[[tex]H_{2} PO_{4}[/tex]-]
Substituting the values gives:
6.2 ×[tex]10^{-8}[/tex] = [tex]x^{2}[/tex] / (0.25 - x)
Solving for x gives:
x = 7.1 ×[tex]10^{-5}[/tex]M
Therefore, the concentration of [tex]H_{3} O[/tex]+ ions in the solution is 7.1 × [tex]10^{-5}[/tex] M.
Know more about concentration here:
https://brainly.com/question/28564792
#SPJ11
The experiment states that a distillation should never be continued until the distilling flask is dry. Does dry mean 'no water present' as when using a drying agent on an organic solution? explain
Main Answer: In the context of distillation, the term "dry" does not mean "no water present." Instead, it means that the distilling flask should not be allowed to become completely empty or run dry during the distillation process.
Supporting Answer: During a distillation, a liquid mixture is heated in the distilling flask, causing it to evaporate and rise up into the condenser, where it is cooled and condensed back into a liquid. If the distilling flask is allowed to become completely empty or run dry, it can cause the temperature of the flask to rise rapidly, potentially leading to overheating, thermal decomposition, or even a fire.
Therefore, it is important to monitor the level of liquid in the distilling flask and stop the distillation before the flask becomes completely empty. The remaining liquid can then be discarded or used for further analysis.
In contrast, when using a drying agent on an organic solution, the goal is to remove any remaining water molecules from the solution to improve its purity or to prepare it for a subsequent reaction. In this case, the term "dry" does mean "no water present" because the drying agent is designed to absorb or remove all water molecules from the solution.
Therefore, in the context of distillation, "dry" means not allowing the distilling flask to become completely empty or run dry, while in the context of using a drying agent on an organic solution, "dry" means removing all water molecules from the solution.
Learn more about distillation and drying agents at
https://brainly.com/question/31488281?referrer=searchResults
#SPJ11.
A d1 octahedral complex is found to absorb visible light, with the absorption maximum occurring at 525 nm. Calculate the crystal-field splitting energy, Δ , in kJ/mol.
If the complex has a formula of [M(H2O)6]3 , what effect would replacing the 6 aqua ligands with 6 Cl– ligands have on Δ?
Would it increase , decrease or remain constant?
To calculate the crystal-field splitting energy, we need to use the equation Δ = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength of the absorption maximum.
Substituting the given values, we get Δ = (6.626 x 10⁻³⁴ J s x 3 x 10⁸ m/s)/(525 x 10⁻⁹ m) = 3.80 x 10⁻²⁰ J. To convert this to kJ/mol, we need to multiply by Avogadro's constant and divide by 1000, which gives Δ = 231 kJ/mol.
Replacing the 6 aqua ligands with 6 Cl- ligands would have an effect on Δ because Cl- is a stronger ligand than H₂O and would cause greater splitting of the d-orbitals. This means that the energy required to split the orbitals (i.e., Δ) would increase, leading to an increase in the crystal-field splitting energy. Therefore, replacing the aqua ligands with Cl- ligands would increase Δ.
The crystal-field splitting energy (Δ) can be calculated using the formula: Δ = hc/λ, where h is Planck's constant (6.626 x 10⁻³⁴ J·s), c is the speed of light (3.00 x 10⁸ m/s), and λ is the wavelength of the absorption maximum (525 nm).
First, we need to convert the wavelength from nm to meters: 525 nm * (1 x 10⁻⁹ m/nm) = 5.25 x 10⁻⁷ m.
Now, we can calculate Δ:
Δ = (6.626 x 10⁻³⁴ J·s) * (3.00 x 10⁸ m/s) / (5.25 x 10⁻⁷ m) = 3.78 x 10⁻¹⁹ J.
To convert Δ to kJ/mol, we can use Avogadro's number (6.022 x 10²³ mol⁻¹):
Δ = (3.78 x 10⁻¹⁹ J) * (6.022 x 10²³ mol⁻¹) * (1 kJ / 1000 J) = 227.9 kJ/mol.
When replacing the 6 aqua ligands with 6 Cl⁻ ligands in the [M(H₂O)₆]³⁺ complex, the crystal-field splitting energy Δ would generally increase. This is because Cl⁻ is a stronger field ligand than H₂O, which leads to a larger splitting of the d-orbitals and results in a higher Δ value.
To know more about Planck's constant visit:-
https://brainly.com/question/30763530
#SPJ11
wWhen borax is dissolved in water, do you expect the standard entropy of the system to increase or decrease?
When borax is dissolved in water, you can expect the standard entropy of the system to increase.
The dissolution process involves breaking the ionic bonds in the solid borax and forming new interactions with the water molecules. During this process,
the solid borax structure breaks apart, and the individual ions become surrounded by water molecules, leading to an increased number of possible arrangements and positions for the particles.
Entropy is a measure of the randomness or disorder of a system, and as borax dissolves in water, the system becomes more disordered.
The reason for this increase in disorder is that the individual ions are no longer in a fixed, crystalline lattice structure and are now free to move and interact with the water molecules in various ways.
As the number of possible arrangements and positions for the particles increases, the entropy of the system increases.
In summary, when borax is dissolved in water, the standard entropy of the system increases due to the breaking of the ionic bonds in the solid borax and the formation of new interactions with the water molecules.
This leads to an increase in the randomness and disorder of the system as the individual ions become more mobile and have more possible arrangements and positions.
To know more about standard entropy refer here
https://brainly.com/question/30691597#
#SPJ11
a is made up of two unshared electrons and is shown as two dots in a lewis structure is called
A Lewis structure is a diagrammatic representation that illustrates the arrangement of atoms, bonds, and lone pairs in a molecule. It is based on the concept of valence electrons.
In the Lewis structure, also known as the Lewis dot structure, the symbol A represents an element. Each dot in the structure represents a valence electron of the element. Valence electrons are the outermost electrons in an atom and are involved in chemical bonding.
In some cases, an element may have two unshared electrons, which means they are not involved in bonding with other atoms. These unshared electrons are depicted in the Lewis structure as two dots placed next to the element symbol A.
The presence of two unshared electrons can impact the reactivity and chemical behavior of the element, as these electrons are relatively more available for forming bonds or participating in chemical reactions. By representing the two unshared electrons with two dots, the Lewis structure provides a visual representation of the electron configuration of element A.
Learn more about Lewis structure here:
https://brainly.com/question/29603042
#SPJ11
An old wooden tool is found to contain only 15% of 14
6
C
that a sample of fresh wood would. How old is the tool?
The wooden tool is approximately 4,130 years old.
The age of the wooden tool can be determined by using the half-life of ¹⁴C, which is 5,700 years.
We can use the following equation to determine the age of the tool:
t = (ln(Nf/No)) / (-0.693 * t₁/₂)
where t is the age of the sample, Nf is the final amount of ¹⁴C in the sample (15% of the initial amount), No is the initial amount of ¹⁴C in the sample (100%), and t₁/₂ is the half-life of ¹⁴C.
Plugging in the values given in the problem, we get:
t = (ln(0.15/1)) / (-0.693 * 5700)
t = 4,130 years
To know more about half-life, refer here:
https://brainly.com/question/16387602#
#SPJ11
the ksp of calcium hydroxide, ca(oh)2, is 1.3 × 10–6. calculate the molar solubility of calcium hydroxide. give the answer is 2 sig. figs
When the Ksp of calcium hydroxide, Ca(OH)₂, is 1.3 × 10⁻⁶ , the molar solubility of calcium hydroxide is approximately 0.010 M.
To calculate the molar solubility of calcium hydroxide,
At first we need to use the solubility product constant (Ksp) for this compound. The Ksp for calcium hydroxide Ca(OH)₂ is given as 1.3 ×10⁻⁴.
The Ksp expression for calcium hydroxide is:
Ksp = [Ca²⁺][OH⁻]²
where, [Ca²⁺] and [OH⁻] are the concentrations of calcium ions and hydroxide ions in the solution, respectively.
Since calcium hydroxide dissolves in water to form [Ca²⁺] and [OH⁻] ions, the molar solubility of calcium hydroxide (S) can be expressed as:
S = [Ca²⁺]= [OH⁻]
Therefore, we can rewrite the Ksp expression as:
Ksp = S × S⁻² = S⁻³
Rearranging this equation gives:
S = ∛Ksp
Substituting the given value of Ksp, we get:
S =∛ 1.3 ×10⁻⁴
S= 0.010 M (approximately)
Therefore, the molar solubility of calcium hydroxide is approximately 0.010 M.
To know more about Ksp here
https://brainly.com/question/31434382
#SPJ4
how many rotational degrees of freedom are there for linear and nonlinear molecules?
The number of rotational degrees of freedom for a molecule depends on whether it is linear or nonlinear.
For a linear molecule, there are two possible rotations around the axis of the molecule, which means that it has two rotational degrees of freedom. On the other hand, for a nonlinear molecule, there are three possible rotations, one around each of the three mutually perpendicular axes passing through the center of mass of the molecule. Therefore, a nonlinear molecule has three rotational degrees of freedom.
Linear molecules have 2 rotational degrees of freedom, while nonlinear molecules have 3 rotational degrees of freedom. Rotational degrees of freedom refer to the number of independent ways a molecule can rotate in three-dimensional space. For linear molecules, they can rotate around two axes (x and y), while for nonlinear molecules, they can rotate around all three axes (x, y, and z).
To know more about molecule visit
https://brainly.com/question/19922822
#SPJ11
if the gew of elemental sulfur is 16.0300 grams, what is the approximate gew of the metal used in the experiment?
The approximate GEW of the metal used in the experiment is 19.4957 grams.
Step 1: Initial crucible weight = 23.0302 grams.
Step 2: Combined weight of crucible and unknown metal = 28.0423 grams.
Weight of the unknown metal = Combined weight - Initial crucible weight
Weight of the unknown metal = 28.0423 g - 23.0302 g
Weight of the unknown metal = 5.0121 grams
Step 3: Sulfur is added, and the crucible with its contents is heated. Excess sulfur is vaporized.
Step 4: Combined weight of crucible and metal sulfide = 34.6023 grams.
Weight of the metal sulfide = Combined weight - Initial crucible weight
Weight of the metal sulfide = 34.6023 g - 23.0302 g
Weight of the metal sulfide = 11.5721 grams
To find the approximate gram equivalent weight (GEW) of the metal, we need to determine the weight of sulfur in the metal sulfide. Since the GEW of sulfur is 16.0300 grams and it combines with 8.0000 grams of oxygen, we can calculate the grams of sulfur in the metal sulfide:
Grams of sulfur = Weight of metal sulfide - Weight of unknown metal
Grams of sulfur = 11.5721 g - 5.0121 g
Grams of sulfur = 6.5600 grams
Now, we can set up a proportion to find the approximate GEW of the metal:
Grams of sulfur / Grams of oxygen = GEW of sulfur / GEW of metal
Plugging in the values:
6.5600 g / 8.0000 g = 16.0300 g / GEW of metal
Solving for the GEW of metal:
GEW of metal = (8.0000 g x 16.0300 g) / 6.5600 g
GEW of metal ≈ 19.4957 grams
The correct question is:
An early development in chemistry was the verification of the Law of Definite Proportions. It was recognized that all binary compounds could be defined as a simple weight ratio between the constituent elements. The amount of an element could be expressed in the gram equivalent weight (GEW), the amount of an element that combines with 8.0000 grams of oxygen. Unlike atomic weight, the gram equivalent weight of an element can be found by chemical analysis of one of its binary compounds.
Elemental sulfur reacts readily with metals to form binary metal sulfides, and was used in the following procedure to help a student determine the GEW of an unknown metal. The procedure consisted of four steps:
Step 1
A porcelain crucible is cleaned with 6 M nitric acid and heated gently. After rinsing and drying, the crucible is heated with a Bunsen burner until the base has a deep red glow. The crucible is allowed to cool to room temperature and then weighed. The initial crucible weight is 23.0302 grams.
Step 2
A sample of the unknown metal is placed in the crucible and they are weighed together. The combined weight is 28.0423 grams.
Step 3
Sulfur is then added, and the crucible with its contents are heated vigorously for 30 minutes. Excess sulfur is vaporized in this step.
Step 4
The crucible was allowed to cool to room temperature and then weighed. The combined crucible-metal sulfide weight is 34.6023 grams.
Question :
If the GEW of elemental sulfur is 16.0300 grams, what is the approximate GEW of the metal used in the experiment?
To know more about GEW follow the link:
https://brainly.com/question/32319871
#SPJ4
how many chlorine atoms are in 23 molecules of phosphorus pentachloride, pcl₅?
In 23 molecule of phosphorus pentachloride there are 115 Chlorine atoms.
There are 115 chlorine atoms in 23 molecules of phosphorus pentachloride, PCl₅. This is because each molecule of PCl₅ contains 5 chlorine atoms, and since there are 23 molecules, we can simply multiply 5 by 23 to get 115.
Phosphorus pentachloride, PCl₅, is a covalent compound that is composed of one phosphorus atom and five chlorine atoms. The prefix "penta" means five, which tells us that there are five chlorine atoms in each molecule of PCl₅. To determine the total number of chlorine atoms in 23 molecules of PCl₅, we can simply multiply the number of molecules by the number of chlorine atoms in each molecule. Therefore, 23 molecules of PCl₅ contain a total of 115 chlorine atoms.
Know more about Phosphorus Pentachloride here:
https://brainly.com/question/29141612
#SPJ11
What is a decomposition reaction? provide one example of a decomposition reaction that occurs naturally in the environment and is essential for its ecosystem
A decomposition reaction is a chemical reaction in which a compound breaks down into simpler substances, usually as a result of heat, light, or the introduction of another substance. It is the opposite of a synthesis reaction where simpler substances combine to form a more complex compound.
A decomposition reaction involves the breakdown of a compound into simpler substances. An example of a decomposition reaction occurring naturally in the environment is the decay of organic matter by decomposers, such as bacteria and fungi, which is essential for the ecosystem.
During decomposition, the organic matter is broken down into simpler substances, including water, carbon dioxide, and various organic compounds. These decomposed materials are then recycled and become available for other organisms to utilize as nutrients. Decomposition plays a vital role in nutrient cycling, as it releases essential elements, such as carbon, nitrogen, and phosphorus, back into the environment, allowing them to be used by other organisms for growth and survival.
Overall, decomposition reactions occurring naturally in the environment, such as the decay of organic matter, are essential for the ecosystem as they enable the recycling and redistribution of nutrients, contributing to the sustainability and balance of the ecosystem.
To learn more about decomposition reaction click here : brainly.com/question/21491586
#SPJ11
The acid-dissociation constant for chlorous acid (HClO2) is 1.1×10−2.
Part A Calculate the concentration of H3O+ at equilibrium if the initial concentration of HClO2 is 1.68×10−2 M.
Part B Calculate the concentration of ClO2− at equilibrium if the initial concentration of HClO2 is 1.68×10−2 M
Part C Calculate the concentration of HClO2 at equilibrium if the initial concentration of HClO2 is 1.68×10−2 M .
Express the molarity to three significant digits.
The concentration of H3O+ at equilibrium is 1.0×10−3 M The concentration of ClO2− at equilibrium is 1.58×10−2 M, The concentration of HClO2 at equilibrium is 1.58×10−2 M.
Part A:
The equation for the dissociation of HClO2 is:
HClO2 + H2O ⇌ H3O+ + ClO2−
The acid dissociation constant, Ka, is:
Ka = [H3O+][ClO2−]/[HClO2]
We know that Ka = 1.1×10−2 and [HClO2] = 1.68×10−2 M. We can assume that x is the concentration of H3O+ and ClO2− at equilibrium. Then, using the equilibrium constant expression, we get
:-1.1×10−2 = x^2/ (1.68×10−2 - x)
Since x is small compared to 1.68×10−2, we can approximate (1.68×10−2 - x) as 1.68×10−2. Solving for x, we get :- x = [H3O+] = [ClO2−] = 1.0×10−3 M
Part B:
Using the law of conservation of mass, we know that [HClO2] = [H3O+] + [ClO2−]. Substituting the values we calculated in Part A, we get:
[HClO2] = 1.68×10−2 M
[H3O+] = 1.0×10−3 M
[ClO2−] = 1.68×10−2 M - 1.0×10−3 M = 1.58×10−2 M
Part C:
We know that [HClO2] = 1.68×10−2 M initially, and the concentration of HClO2 at equilibrium will be equal to the initial concentration minus the concentration of H3O+ that was produced during the dissociation of HClO2. Substituting the values we calculated in Part A, we get:
[HClO2] = 1.68×10−2 M - 1.0×10−3 M = 1.58×10−2 M
To know more about H3O+ refer here :-
https://brainly.com/question/14542918#
#SPJ11