Answer:
NaF
Explanation:
Melting point of NaF is 993°C but Melting point of KF is 858°C
Answer:
I think naf
Explanation:
PLZ HELP
11 and 12 :)))
Answer:
Explanation:
number 12 is magnesium i think which is group lla which is B alkaline earths
name two solid liquid and gaseous element at the normal temperature and normal press
ure
Answer:
Solid: calcium and potassium
Liquid: mercury and bromine
Gaseous: oxygen and fluorine
Explanation:
Matter exists in three different states namely: solid, gaseous and liquid. Elements that are found in nature are classified as matter. Since, these elements are grouped as matter, they can either be found as either solids, liquids or gases at normal temperature and pressure.
At normal temperature (20°C or 293K) and pressure (1 atm), the following elements are found to exists in the respective state of matter:
Solid: Calcium (Ca) and potassium (K)
Liquid: Mercury (Hg) and bromine (Br)
Gaseous: Oxygen (O) and fluorine (F)
A 14.1g sample of NaOH is dissolved in 200.0g of water in a coffee-cup colorimeter. The temperature increases from 20.0C to —-. Specific heat of liquid water is 4.18 J/g-K and deltaH for the dissolution of sodium hydroxide in water is 44.4kj/mol.
Answer:
The temperature finally increased from 20 °C to 38.7 °C
Explanation:
This a problem about calorimetry. Formula to solve it is:
Q = m . C . ΔT
Where ΔT is Final T° - Initial T°
m is the mass
and C, specific heat.
In this situation we are dissolving NaOH where 1 mol requires 44.4 kJ of heat. As we do not have 1 mol, we need to determine the heat that is released.
We convert the mass to moles
14.1 g . 1 mol / 40g = 0.3525 mol
We determine the heat
0.3525 mol . 44400 J/mol = 15651 Joules of heat.
Now we can replace data in the calorimetry formula:
15651 J = 200 g . 4.18 J/g°C (Final T° - 20°C)
15651 J / (200 g . 4.18 J/g°C) = Final T° - 20°C
18.7°C + 20°C = Final T° → 38.7°C
Which square (A, B, C, or D) represents the repeating subunit of the polymer shown?
Answer:
c is the answer
Explanation: just answerd it and got it correct
30 points please help!!!!!!!!
pH 3 = 10 times of pH 4 in terms of H⁺ concentration
Further explanationpH is the degree of acidity of a solution that depends on the concentration of H⁺ ion. The greater the value the more acidic the solution and the smaller the pH.
pH = - log [H⁺]
So that the two quantities between pH and [H⁺] are inversely proportional because they are associated with negative values.
A solution whose value is different by n has a difference in the concentration of H⁺ ion of 10ⁿ.
So pH 3 and pH 4 have a difference in the concentration of H⁺ ion of 10¹ = 10
pH 3 = -log[10⁻³]
pH 4 = - log[10⁻⁴]
pH 3 = 10 times of pH 4 in terms of H⁺ concentration
And pH 3 is stronger in acid than pH 4
Which part of the atom determines how an element interacts in a chemical reaction?
Ansewer : nucleus
The number of protons in the nucleus determines which element an atom is, while the number of electrons surrounding the nucleus determines which kind of reactions the atom will undergo. The three types of subatomic particles are illustrated below for an atom of helium—which, by definition, contains two protons.
Why is the organization of the periodic table by physical properties not very useful?
Answer:
It shows no regular pattern
Explanation:
Physical properties of an element are those we can observe and feel with our senses. Also, the use special equipment can enhance our perception of these properties.
The same physical property can be shared different number elements. On the periodic table, all the elements in group 1 and 2 are metals. This is not very useful for scientists whose emphasis is to distinguish one atom from the other. Therefore, physical properties are highly limited in the organization of the periodic table.When a mixture of oxygen and hydrogen is ignited in a test tube, the reaction shown occurs. Hydrogen + Oxygen → Water + Energy Substances that form as a result of a chemical reaction are called catalysts catalysts products products precipitates precipitates reactants
Answer:
products
Explanation:
In chemistry, chemical reactions is the combination of two or more substances to yield other substances. The substances that react is called REACTANTS while the substances formed after the reaction is called PRODUCTS.
According to this question, a mixture of oxygen and hydrogen is ignited in a test tube as follows:
Hydrogen + Oxygen → Water + Energy
In this reaction, the substances being combined (usually found on the left side of the equation) are hydrogen and oxygen. Hence, oxygen and hydrogen are REACTANTS. Also, the substances produced as a result of the reaction is water (H2O). The PRODUCTS of the reaction is WATER.
Answer:
Soy isk polq ja uso??
Explanation:
Na uend qoaki uwsh.. aju qah!
formula of preparation of sodium hydroxide
The chemical formula of sodium hydroxide is NaOH, and its molar mass is 40.01 g/mol. It is the alkali salt of sodium, and its structure is shown below:
It is an ionic compound consisting of sodium cation (Na+) and hydroxide (OH-) anion.
please help me ill give brainliest if right
Answer:
3000kg
Explanation:
Given parameters:
Speed = 20m/s
Kinetic energy = 600000J
Unknown:
Mass = ?
Solution:
Kinetic energy is the energy due to the motion of a body.
It is expressed as;
K.E = [tex]\frac{1}{2}[/tex] m v²
m is the mass
v is the speed
Now find m;
600000 = [tex]\frac{1}{2}[/tex] x m x 20²
600000 = 200m
m = 3000kg
Which ions aren't shown in net ionic reactions, because they are present as both reactants and products of the reaction, so they do not participate in the reaction?
Explanation:
This is correct!
Ions that exist in both the reactant and product side of the equation are referred to as spectator ions. Overall, they do not partake in the reaction. If they are present on both sides of the equation, you can cancel them out.
An example is;
Na+(aq) + Cl−(aq) + Ag+(aq) + NO3−(aq) → Na+(aq) + NO3−(aq) + AgCl(s)
The ions; Na+, NO3−(aq) would be cancelled out to give;
Cl−(aq) + Ag+(aq) → AgCl(s)
Do bases lose or gain hydrogen ions?
Help :-)
Answer:
Acids are classified in the Bronsted Lowry acid-base theory as species, which losses hydrogen ions (H+, known as protons) in a chemical reaction (and are foundation species that accept hydrogen ions).
A chemist was working on a new treatment for nonliving infectious agents that are not curable. What type of infectious agent is the new medicine for?
A. Virus
B.Fungus
C.Parasite
D.Bacteria
Answer: D: bacteria
Explanation:
Of the two bromoderivatives, C6H5CH(CH3)Br and C6H5CH(C6H5)Br which one is more reactive in SN1 substitution reaction and why?
Answer:
tertiary
Explanation:
tertiary halogenoalkanes are more reactive than primary and secondary as the carbocation is more stable due to alkyl groups( have high electron density) donating electrons to stabilise the carbocation
Which of these elements could gain one electron to form an ionic bond with potassium explain why
Answer:
ChlorineIt has 7 electrons in it last shell. it will gain one electron to complete its octet and become Cl-. The ionic bond of chlorine form with potassium is Kcl ( potassium chloride)
Phosphorus has 5 electrons in its last shell it need 3 more electron to stable .Sulphur has 6 electron. it needs 2 electrons Argon is already stable as it has 8 electrons in its last shell it will not gain or loose any electronsTo solve such this we must know the concept of ionic reaction. Cl is the element could gain one electron to form an ionic bond with potassium.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound.
Potassium will act as cation as K⁺, chlorine has 7 electrons in it last shell, it can gain one electron to complete its octet and become Cl⁻. The ionic compound of Cl with K is KCl.
Phosphorus has 5 electrons in its last shell it so, it needs 3 more electron to get stable .Sulphur has 6 electron, it needs 2 electrons to get stable. Argon is already stable as it has 8 electrons in its last shell so, it will not gain or loose any electrons.
Therefore, Cl is the element could gain one electron to form an ionic bond with potassium.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
0.485 moles BaSO4 is equal to how many grams of BaSO4?
___ grams BaSO4
Which of the following elements has the highest electronegativity?
*potassium
*lithium
*chlorine
*oxygen
how many electrons does fluorine take
Answer:
Fluorine has nine electrons
Which of these share chemical bonds
Mixtures
all matter
Compounds
Answer:
Compounds
Explanation:
All compounds of a substance shares chemical bonds between them and their structures.
The bonds can come in different forms. Compound are held by chemical bonds within their atoms.
Mixtures are composed of different atoms and compoundsThey are mostly not chemically bonded togetherMixtures can be separated by physical means because they lack bonds between them. Compounds are chemically bonded togetherCan someone please solve this with the working and explanation
Answer:
A
Explanation:
As you add a bulky group to the end of a carbon chain the boiling point goes up on the molecule.
Why do helium balloons pop in a hot car?
Answer: because helium molecules get bigger when they heat up, so if your balloons keep getting hotter, they will eventually pop.
Explanation:hope these gave u a clue and have a wonderful Christmas break ❄️
Explanation:
Because helium molecules grow bigger as they are heated up and eventually they popped out
Describe what has to happen when matter is heated by convection
Answer:
Here^
Explanation:
The matter starts heating, up as if it's ice , turns into a liquid.
Name the following molecules:
P4S5______________________________________________
CH4______________________________________________
NF3 ______________________________________________
N2O______________________________________________
How many Cl- bond with one Na+ ion?
Do acids lose or gain hydrogen ions?
Help
please
Answer: They lose them :)
Explanation:
PLEASE HELP
The area in which you live has a particular climate. It also has weather. Which claim describes the difference between climate and weather?
Group of answer choices
Weather is determined by temperature and precipitation, whereas climate is determined only by humidity, air pressure, and wind conditions.
Climate is the condition of Earth’s atmosphere at a particular time and place, whereas weather is the characteristic climate in an area over a long period of time.
Climate is determined by temperature and precipitation, whereas weather is determined only by humidity, air pressure, and wind conditions.
Weather is the condition of Earth’s atmosphere at a particular time and place, whereas climate is the characteristic weather in an area over a long period of time.
Answer:
Weather is the condition of Earth’s atmosphere at a particular time and place, whereas climate is the characteristic weather in an area over a long period of time.
Explanation:
Weather and climate are two very important conditions that describes the atmospheric overview of a place.
Weather is reported over a short period of time, it is the condition of the atmosphere at a particular time and place.
Climate is reported over a long period of term. The average weather condition of a place over a long period of time is the climate.
The most important control over the climate of a place is the temperature and amount of precipitation it receives over a period of time. Weather conditions is reported using more diverse factors such a temperature, pressure, humidity, precipitation, etc.
Which of the following families would have the highest electronegativity
alkali metals
halogens
transition metals
nitrogen group
Answer:
halogens
Explanation:
Electronegativity increases as you move to the right and up the periodic table. Thus, halogens would have the greatest electronegativity.
please give thanks, click heart button! :)
Help me answer this plz.
Answer:
87.58 L of C₂H₂
Explanation:
We'll begin by calculating the number of mole in 250 g of CaC₂.
This can be obtained as follow:
Mass of CaC₂ = 250 g
Molar mass of CaC₂ = 40 + (12×2)
= 40 + 24
= 64 g/mol
Mole of CaC₂ =?
Mole = mass /Molar mass
Mole of CaC₂ = 250 / 64
Mole of CaC₂ = 3.91 moles
Next, the balanced equation for the reaction. This is given below:
CaC₂ + 2H₂O —> C₂H₂ + Ca(OH)₂
From the balanced equation above,
1 mole of CaC₂ reacted to produce 1 mole of C₂H₂.
Next, we shall determine the number of mole of C₂H₂ produced by the reaction of 250 g (i.e 3.91 moles) of CaC₂. This can be obtained as follow:
From the balanced equation above,
1 mole of CaC₂ reacted to produce 1 mole of C₂H₂.
Therefore, 3.91 moles of CaC₂ will also react to produce 3.91 moles of C₂H₂.
Finally, we shall determine the volume of C₂H₂ produced from the reaction. This can be obtained as follow:
Recall:
1 mole of any gas occupy 22.4 L at STP.
1 mole of C₂H₂ occupied 22.4 L at STP.
Therefore, 3.91 moles of C₂H₂ will occupy = 3.91 × 22.4 = 87.58 L
Thus, 87.58 L of C₂H₂ is produced from the reaction.
Which of the following is NOT an example of potential energy?
A. car moving down the highway
B. log on a fire
C. person standing on a diving board
D. liter of gasoline
Answer:
A. car moving down the highway
Explanation:
Potential energy is when the energy is being held in, as in, it is very still, and not moving.
When a car is moving down a highway, it is releasing kinetic energy, instead of potential.
Consider the following incomplete reaction. Mg + 2Y ---> MgCl₂ + H₂ Choose the formula for the missing substance Y.
A. H₂Cl
B. HCl
C. Cl
D. Cl₂