The mole ratio of the given reaction is 1 mole HF/1 mole HCI; option A.
What are mole ratios?Mole ratios are ratios of the moles of reactants and products in a balanced chemical equation of a reaction.
Mole ratios are obtained from balanced chemical equations.
The balanced equation of the reaction is given below:
FeCl3 + 3HF ----> FeF3 + 3HCIThe mole ratio of the given reaction is 1 mole HF/1 mole HCI.
Learn more about mole ratio at: https://brainly.com/question/19099163
#SPJ1
H3C - CH2 - CEC - CH3
Compound name
Answer:
2-pentene
hope this helps :)
Explanation:
If a sample of CO2 contains 48 g of oxygen, how many moles of CO2 are there?
Answer:
0.75 moles of CO2
Explanation:
molar mass of CO2⇒ 44.01 g/mol
molar mass Oxygen ⇒ 31.998 g/mol
divide the mass given by molar mass of oxygen so
48÷31.998= 1.50009376 moles of O
then you use the ration of oxygen to carbon to find the moles of CO2 which is one mole of CO2 for 2 moles of oxygen
1.50009376 moles of O ×[tex]\frac{1}{2}[/tex] = 0.75004688
with sig figs
0.75 moles of CO2
How many F atoms are present in 3.16 moles of BaF2? show work
Answer:
3.80 × 10²⁴ atoms of F
Explanation:
Step 1: Given data
Moles of barium fluoride (BaF₂): 3.16 mol
Step 2: Calculate the moles of fluorine in 3.16 moles of barium fluoride
The molar ratio of BaF₂ to F is 1:2. The moles of F in 3.16 moles of BaF₂ are 2/1 × 3.16 mol = 6.32 mol.
Step 3: Calculate the atoms of F in 6.32 moles of F
We will use Avogadro's number: there are 6.02 × 10²³ atoms of F in 1 mole of atoms of F.
6.32 mol × (6.02 × 10²³ atom/1 mol) = 3.80 × 10²⁴ atom
During photosynthesis, plants and some other organisms use energy from the sun to convert (change): carbon dioxide (CO2) and water (H2O) into ____________ (O2) and __________ (C6H12O6)
Answer:
CO2 + H2O → O2 + C6H12O6
CO2 = carbon dioxide
H2O = water
O2 = oxygen
C6H12O6 = glukose
smallest to largest: mountain system, mountain range, mountain belt, mountain.
Answer:
mountain, mountain range, mountain system, mountain belt
Explanation:
edge 2021
using this chemical might discolour equipment and surfaces
Answer: do not know how to answer this
Explanation:
8. Why is the magnetic force considered to be a noncontact force?
Answer:
Magnetic forces are non contact forces; they pull or push on objects without touching them. Magnets are only attracted to a few 'magnetic' metals and not all matter. Magnets are attracted to and repel other magnets.
Hope this helps!!!
Explanation:
A. Express each Fraction in Decimal form. Round off your answers into
thousandths place.
1. 3/4
Answer:
0.75
Explanation:
3/4=0.75 so therefore its 0.75
Which of the following favors the solubility of an ionic solid in a liquid solvent? Group of answer choices a large magnitude of the solvation energy of the ions a small magnitude of the lattice energy of the solute a large polarity of the solvent all of the above none of the above
Answer:
all of the above
Explanation:
The solubility of an ionic solid in a liquid solvent largely depends on three factors:
i) The solvation energy
ii) The lattice energy of the solid
iii) The polarity of the of the solvent
A large solvation energy and a small magnitude of lattice energy means that the ionic solute will dissolve very easily in the solvent.
Secondly, the solvent must have a large polarity, this is why water serves as a good solvent for most ionic solutes.
how many moles are in a 4.2 gram gold sample
6. Clownfish, sea anemone, coral, sea urchins, sponges and parrot fish are 5 points
just a few examples of the large variety of organisms that can be found in
a coral reef. The coral reef and its inhabitants (residents) are suffering due
to several factors such as pollution, coastal development, sedimentation
and destructive fishing practices. What would be the most likely result if
some of the species in the coral reef are destroyed? *
Answer:
The orange-and-white clownfish you know from Hollywood is only one of 30 species of clownfish that live in coral reefs around the world; small in size and big in personality, these tiny comedians have one of the most unique lifestyles in the reef. The orange-and-white clownfish you know from Hollywood is only one of 30 species of clownfish that live in coral reefs around the world; small in size and big in personality, these tiny comedians have one of the most unique lifestyles in the reef.
Explanation:
point being, it would be absolutely terrible
Coral reef are the biggest biodiversity in the world. Therefore, destruction of coral reefs definitely affect the aquatic livings. As well as it leads to erosion of seashore lines.
What are coral reefs?Corals reefs are the habitat of 25% of sea organisms. It means there are well over a million species that rely on coral reefs for their existence. The reef offers these organisms the vital food, habitat, and breeding grounds required for the survival of their species.
The marine biodiversity would suffer greatly if their homes vanished. And many fish, turtles, and other species would vanish in a domino-like fashion.
Coral reefs are threatened by a number of things, such as local threats like overfishing, destructive fishing methods, coastal development, pollution, and careless tourism, as well as global effects of climate change like warming seas and rising CO₂ levels in the water. Natural phenomena like hurricanes, El Nio, and diseases are also a threat to oral reefs.
Find more on coral reefs:
https://brainly.com/question/364711
#SPJ6
Time is always the same on the same line of latitude or longitude
Answer:
Longtitude
No explanation :)
The density for potassium is 0.856 g/cm3. What would be the mass of a 35 cm3 piece of potassium?
Answer:
30 grams
Explanation:
density = mass / volume => mass = density x volume
mass = 0.856 g/cm³ x 35 cm³ = 29.96 grams ≅ 30 grams 2 sig. figs.
19. A beam of light can be seen as it passes through a(n).
a. Element
I
b. Compound
C. Solution
d. Heterogeneous Mixture
A beam of light can be seen as it passes through a
How might ocean waves affect a beach over thousands of years? Explain your answer.
Answer:
Explanation:
Well a oceans waves could erode the beach it it is a rocky one, it can wash the sand out and can cause rocks to fall.
What is the particle behavior of an liquid?
Answer: The particles are moving fast but close together.
Answer:
its in the explanation.
Explanation:
1.In liquids, particles are quite close together and move with random motion throughout the container. Particles move rapidly in all directions but collide with each other more frequently than in gases due to shorter distances between particles.
2.It assumes the shape of the part of the container which it occupies particles can move/slide past one another.
Hope this helps. :)
what is functional group of ethers?
Answer:
Explanation:The ether functional group consists of an oxygen atom that forms single bonds with two carbon atoms
Sketch the titration curve for the titration of a generic weak base B with a strong acid. The titration reaction is
B+H+⇌BH+
On the curve indicate the points that correspond to the following:
a) the equivalence point.
b) the region with maximum buffering) the point where pH = pKbd) the region where pH depends only on [B]e) the region where pH depends only on [BH+]f) the region where pH depends only on the amount of excess strong acid
Answer:
Kindly check the attached picture.
Explanation:
Titration is one of the useful concept or practical in chemistry which is used in the determination of the concentration of a particular chemical specie. Without mincing words, let us dive straight into the solution to the question;
(a) Determining the equivalence point using the graph.
=> The equivalence point is the point at which there has been been "enough" addition of the acid to the base to give us the congugate acid. In the diagram showing the curve, it is the point labelled (a).
(b)The next thing is to determine the region with maximum buffering.
=> The position with the maximum buffering ranges from the point labelled (b) in the graph and it is the point when the acid and the base has been added. But the point with the maximum buffering is labeled as point (c).
(c). Determination of the point where pH = pKb.
=> The Point in which the pH = pKb is the point a
(d). The region where pH depends only on [B].
=> The starting point in the point in which the pH is dependent on the concentration of the base, [B].
(e). The region where pH depends only on [BH+].
=> This is the same point with point labelled as (a). Thus, point (a) and (e) are the same.
(f). The region where pH depends only on the amount of excess strong acid is the point labelled as (f) which is known as the post equivalence point.
How is matter divided?
Which atom has exactly 15 protons?
Answer:
Phosphorus
Explanation:
Which of the following is an Elementary compound?
A. CO2
B. N2
C. SO2
D. H2S
heeeeeeeeeelp please please please
Answer:
Explanation:
In my opinion the answer should be SO2
Answer:
a should be answer i think.
The indicator dilution method is a technique used to determine flow rates of fluids in channels for which devices like rotameters and orifice meters cannot be used (e.g., rivers, blood vessels, and large- diameter pipelines). A stream of an easily measured substance (the tracer) is injected into the channel at a known rate and the tracer concentration is measured at a point far enough downstream of the injection point for the tracer to be completely mixed with the flowing fluid. The larger the flow rate of the fluid, the lower the tracer concentration at the measurement point. A gas stream that contains 1.50 mole% CO2 flows through a pipeline, Twenty (20.0) kilograms of CO2 per minute is injected into the line. A sample of the gas is drawn from a point in the line 150 meters downstream of the injection point and found to contain 2.3 mole% CO2.(a) Estimate the gas flow rate (k mol/min) upstream of the injection point.(b) Eighteen seconds elapses from the instant the additional CO2 is first injected to the time the CO2 concentration at the measurement point begins to rise. Assuming that the tracer travels at the average velocity of the gas in the pipeline (i.e., neglecting diffusion of CO2), estimate the average velocity (m/s), if the molar gas density is 0.123k mol/m3 what is the pipe diameter?
Answer:
[a]. 55.5kmol/min.
[b]. The average velocity = 8.3m/s.
pipe diameter = 1.0954m.
Explanation:
So, from the question above we are given the following data or information or parameters which are going to help us in solving the above question;
=> ''A gas stream that contains 1.50 mole% CO2 flows through a pipeline''
=> ''Twenty (20.0) kilograms of CO2 per minute is injected into the line.''
=> '' . A sample of the gas is drawn from a point in the line 150 meters downstream of the injection point and found to contain 2.3 mole% CO2''
=> ''molar gas density is 0.123k mol/m3''
[a].The gas flow rate (k mol/min) upstream of the injection point can be calculated as follows.
- Determine the mass balance= j₁ +[ 20 /.123 × 44] = j₃. Thus, the flow gas rate is given as;
w₁ × 1.50 mole% CO2 + 3.6954= 2.3 mole% CO2 × w₃.
-3.610 = - 0.008w₁.
w₁ = 451.3 m³/min.
Thus, the flow rate = 0.123 × 451.3 = 55.51 kmol/min.
[b]. The average velocity = 150/ 18 seconds = 8.3 m/s.
[c]. Pipe Diameter can be calculated as follows;
0.123 × 8.3 × [3.12 × (pipe diameter)² / 4] = 55.51/60.
[1.0209 × 3.12]/4 × [pipe diameter]² = 0.9252.
0.8014065 × [pipe diameter]² = 0.9252.
[pipe diameter]² = 0.9252/ .8014065.
[pipe diameter]² = 1.15443.
[pipe diameter] = √1.15443.
[pipe diameter] = 1.2 m² = 1.0954m.
A) The gas flow rate (k.mol/min) upstream of the injection point is;
55.51 k.mol/min
B) The average velocity and the diameter of the pipe are respectively;
8.33 m/s and 1.072 m
Gas Flow rate in thermodynamics
Due to the fact that there is no reaction or accumulation in the pipeline, we can say that the input of CO₂ is equal to it's output. Thus;
Upstream + Injection = Downstream
A) If we assume that x is the flow rate of gas (kmol/min), then there is the we can write the balance as:
0.015x + (20/44) = 0.023(x + 20/44)
Expanding gives us;
0.015x + 0.4545 = 0.023x + 0.01045
Solving for x gives;
x = 55.51 kmol/min
B) Formula for velocity is;
v = distance/time
Thus, since the length of the pipe is 150 m/s and time is 18 seconds, then velocity is;
v = 150/18
v = 8.33 m/s
Now, volumetric flow rate is calculated from;
Q = q' * ρ
where;
q' is gas flow rate
ρ is gas density
Thus;
Q = 55.51 * 0.123
Q = 451.3 m³/min = 7.522 m³/s
We can also express average velocity as;
v = Q/A
where A is area = πD²/4
Thus;
8.33 = 7.522/(πD²/4)
Making D the subject of the formula gives;
D = √((4 * 7.522)/(8.33π))
D = 1.072 m
Read more about Gas flow rate at; https://brainly.com/question/16014998
List the following elements in order of INcreasing number of valence electrons: C, Cl, As, Na, He
Answer:
He, Cl, As, C, Na
Explanation:
^^
Li atoms in 3.7 moles
Answer:
We know that there are 6.022 * 10²³ atoms in 1 mole of any element
So, that means that there are 6.022 * 10²³ atoms in 1 mole of Li (Lithium)
Atoms in 3.7 Moles:
atoms in one mole = 6.022 * 10²³
atoms in 3.7 moles = 6.022 * 10²³ * 3.7
atoms in 3.7 moles = 22.28 * 10²³
atoms in 3.7 moles = 2.228 * 10²⁴
What is the frequency of a wave having 4.90 x 10 -12 J of energy?
Answer:
The answer is
[tex] \huge 7.40 \times {10}^{21} Hz[/tex]
Explanation:
To find the frequency of the wave we use the formula
[tex]f = \frac{E}{h} \\ [/tex]
where
E is the energy
f is the frequency
h is the Planck's constant which is
6.626 × 10-³⁴ Js
From the question
E = 4.90 × 10-¹² J
So we have
[tex]f = \frac{4.90 \times {10}^{ - 12} }{6.626 \times {10}^{ - 34} } \\ [/tex]
We have the final answer as
[tex]7.40 \times {10}^{21} \: \: Hz[/tex]
Hope this helps you
If you worked at a job for $9.00/hour, what type of correlation is the number of hours worked and your take-home pay?
Answer:
There are no options to this question, however, it can be answered. The answer is:
POSITIVE CORRELATION
Explanation:
Correlation refers to the relationship between two variables. It shows how related two variables are to one another. Hence, when two variables are correlated, there exists a relationship between them. Correlation can either be positive or negative depending on how related they are.
A positive correlation is that correlation in which the two variables are influenced to go in the same direction. That is, when one variable increases, the other variable increases as well and vice versa. This is the case in this question regarding the correlation between number of hours worked and take-home pay.
As the number of hours worked increases, the take-home pay also increases and vice versa. Hence, it is a type of POSITIVE CORRELATION
A boiling pot of soup with a lid on it to keep in the energy is what type of system?
open
closed
isolated
none of the above
Answer: In a closed system, only energy can be exchanged between the system and the surroundings. In the same example of boiling a pot of water, putting the lid on the system changes it from open to closed. This is because when the lid is on the pot, matter can no longer escape.
Explanation:
Answer:
I think its closed
Explanation:
Sorry if its wrong
I need help pls... look at photo
Answer:
LA PRIMERA ES N
Explanation:
10. Which of the following is NOT correctly matched?
A. Salt: Na and C: Element
B. Water: H and O: Corapound
C. Carbon dioxside: C and O: Compound
D. Magnesium chloride: Mg and C: Compound
Answer:
A. because salt : Na and Cl, not C
.
Ag+1, NO3-1
+
Na+1, I-1
->
Answer:
0.3+Na
Explanation: