Which of the following biomolecules contains a porphyrin-based structure containing a mg2 ion?

Answer:

4.52×10^24

Explanation:

N = n × Na

where; N = no. of bananas

n = no. of moles

Na = Avogadro's constant

Which is 6.02×10^23

N = 7.5 × 6.02×10^23

N =4.515×10^24

Answer:

315.51g/mol

Explanation:

137(33 + (16.00 + 1.01) 2 + 8 [1.01 (2) + 16.00] = 315.51g/mol

Answer:

Explanation:

3-methyl pentane.

Answer:

the answer is methyl pentane

explanation: Synthetic fiber or synthetic fibre (in British English; see spelling differences) are fibers made by humans through chemical synthesis, as opposed to natural fibers that are directly derived from living organisms. They are the result of extensive research by scientists to improve upon naturally occurring animal and plant fibers. In general, synthetic fibers are created by extruding fiber-forming materials through spinnerets, forming a fiber. These are called synthetic or artificial fibers. Synthetic fibers are created by a process known as polymerization, which involves combining monomers to make a long chain or polymer. The word polymer comes from a Greek prefix "poly" which means "many" and suffix "mer" which means "single units". (Note: each single unit of a polymer is called a monomer). There are two types of polymerization: linear polymerization and cross-linked polymerization.

============================================

Work Shown:

Using the periodic table, we see that

These are approximations and these values are often found underneath the atomic symbol. For example, the atomic weight listed under carbon is roughly 12.011 grams. I'm rounding to 2 sig figs in those numbers listed above.

So 1 mole of CO2 is approximately 12+2*16 = 44 grams. The 2 is there since we have 2 oxygens attached to the carbon atom.

-------------------

Since 1 mole of CO2 is 44 grams, we can use that to convert from grams to moles.

11.0 grams of CO2 = (11.0 grams)*(1 mol/44 g) = (11.0/44) mol = 0.250 mol of CO2

In short,

11.0 grams of CO2 = 0.250 mol of CO2

This is approximate.

We don't need to use any of the information in the table.

Answer:

.250

Explanation:

Answer:

2.53•10^23 atoms

Explanation:

23 is the exponent btw

Answer:

Kc = 0.333

Explanation:

First of all we state the equilibrium reaction:

C₂H₅OH(aq) + CH₃CO₂H(aq)  ⇄  CH₃CO₂C₂H₅(aq) + H₂O(l)

Initially we start with 1 mol of alcohol and 1 mol of acid. After the reaction goes complete, 0.25 moles of acid have been consumed. As ratio is 1:1, we also consumed 0.25 moles of alcohol. Then, in the product side we finally produced 0.25 moles of water and 0.25 moles of ethyl acetate.

How many moles are available in the reactant side, after the equilibrium?

1 mol - 0.25 moles (that have been reacted) = 0.75 moles.

To determine Kc, we need molar concentrations, so let's see M in products and reactants:

0.75 mol / 0.25 L = 3 M

0.25 mol / 0.25 L = 1 M

We needed to convert 0.250 mL to L → 0.250 mL . 1L/ 1000mL = 0.250 L

Let's determine expression for Kc:

Kc = [H₂O] . [CH₃CO₂C₂H₅]  / [C₂H₅OH] . [CH₃CO₂H]

1 . 1 / 3 . 3 = 1/9 → 0.333

Answer:

5.09 x 10⁶ s⁻¹ = 5.09 x 10⁶ Hz

Explanation:

The relation between frequency (ν) and wavelength (λ) is given by:

λ = c/ν

where c is the speed of light (2.998 m/s) and it is a constant.

So, we first convert the wavelength from nanometers (nm) to meters (m) (1 nm = 1 x 10⁻⁹):

λ= 589 nm x (10⁻⁹ nm/1 m) = 5.89 x 10⁻⁷ m

Then, we calculate the frequency from the equation:

λ = c/ν ⇒ ν = c/λ = (2.998 m/s)/(5.89 x 10⁻⁷ m) = 5.09 x 10⁶s⁻¹ = 5.09 x 10⁶ Hz

Answer:

Its density is exactly the same as that of pure stearic acid. Its boiling point is the same as that of pure stearic acid. Its melting point is different from pure stearic acid.

When one substance dissolves into another, a solution is formed.  A solution is a homogeneous mixture consisting of a solute dissolved into a solvent .  The solute is the substance that is being dissolved, while the solvent is the dissolving medium.  Solutions can be formed with many different types and forms of solutes and solvents.

Explanation:

solute are substance that dissolve in solvent

solvent are substance that dissolve solute

Answer:

H2SO4 cannot be used with CaCO3 to produce CO2 gas

Explanation:

Because it does not dissolve in water- it forms a barrier on the surface of the unreacted CaCO3 which prevents any further reaction. A small volume CO2 is produced, this stops in short time.

I hope this helps :)

Answer:

Carbon- A burnt piece of toast is covered in this element. It is the fourth most abundant element and makes up many living things.

Magnesium- Which element is a member of the alkaline earth metals and has 12 neutrons?

Neon- Which element is an inert gas found in group VIII that produces a red glow in lights?

The neutrons are the neutral sub-atomic particles present in the nucleus. The variation in the number of neutrons produces isotopes that have different atomic mass. Thus, options 1. d and 2. a are correct.

An isotope is said to be an atom of an element that have a different atomic mass but the same atomic number due to the variation in the neutrons in the nucleus. The neutrons have a neutral charge that makes the atom stable.

When a neutron is added or lost it makes the nucleus of the atom unstable leading to radioactive decay. The isotopes have the same constant number of protons in their nucleus.

The atomic number of the atom remains the same due to the stable proton number but varies the atomic mass due to the change in the number of neutrons.

Therefore, options d and a. neutrons and atomic mass are the correct blanks.

Learn more about isotopes here:

https://brainly.com/question/1835223

#SPJ2

Answer:

29.9 g of CO₂ will be produced by the reaction.

Explanation:

This is the reaction:

CaCO₃(s)  + 2HCl (aq)  →  CaCl₂(aq)  + CO₂(g) +  H₂O(l)

First of all, we state the moles of each reactant:

68.1 g . 1mol/ 100.08g = 0.680 mol of carbonate

51.6 g . 1 mol/36.45g = 1.46 mol of acid.

The solid salt is the limiting reactant. Ratio is 2:1

2 moles of acid can react to 1 mol of salt

1.46 mol of acid may react with (1.46 . 1)/2 = 0.727 moles

As we only have 0.680 moles of salt, we do not have enough.

Let's work at the product side. Ratio is 1:1

1 mo of salt can produce 1 mol of gas

0.680 moles will produce 0.680 moles of gas

We convert the moles to mass → 0.680 mol . 44g / 1mol = 29.9 g of CO₂

The number of grams of Co2 should be produced is 29.9 g.

Since

CaCO₃(s)  + 2HCl (aq)  →  CaCl₂(aq)  + CO₂(g) +  H₂O(l)

So,

68.1 g . 1mol/ 100.08g = 0.680 mol of carbonate

51.6 g . 1 mol/36.45g = 1.46 mol of acid.

Now the ratio should be 2:1 for the solid salt

And, there is 2 moles of acid can react to 1 mol of salt

So,

1.46 mol of acid may react with (1.46 . 1)/2 = 0.727 moles

Now the product side the ratio is 1:1

So, that means

1 mo of salt can produce 1 mol of gas

So, the no of grams should be

= 0.680 mol . 44g / 1mol

= 29.9 g of CO₂

Learn more about grams here: https://brainly.com/question/10623774

Answer:

B-Sorry if this isn't right :/ Good luck.

Explanation:

Answer:

D. Scoot

Explanation:

Grew, Rude and truth all have the sound /OO/ scoot follows that pattern.

Answer: a. Yes

Explanation:

Answer:

A. yes

Explanation:

In order to burn this fuel, oxygen is needed, as it is with any fire. The waste products from the combustion process are water and carbon dioxide. Thus, we breathe because oxygen is needed to burn the fuel (sugars and fatty acids) in our cells to produce energy The air we breathe contains about 21% oxygen.

Answer:

Increasing its temperature.

Longer

and thinner

Explanation:

e2021

The resistance of a wire increases by increasing its temperature, using a longer wire and using a thinner wire.

The resistivity of wire describes the opposition to the flow of current in the wire.

[tex]R = \frac{\rho L}{A} \\\\\rho = \frac{RA}{L} \ (ohm-meter)[/tex]

where;

From the formula above, the resistance of a wire increases with

Learn more about resistance of a wire here: https://brainly.com/question/469388

Answer:

Humdity would decrease hence temprature would do the same, hence tundra are called deserts at times.

Explanation:

If you keep on decreasing the temperature without changing the air's moisture content significantly, eventually you'll reach 100 percent relative humidity, and then water vapor will start to condense to form dew.

Dew Point. When the relative humidity reaches 100 percent, dew forms. Dew point refers to the temperature at which air reaches saturation by water molecules. Warmer air can hold more water molecules, and as that warm air cools, it loses water vapor in the form of condensation.

When relative humidity reaches 100 percent or is saturated, moisture will condense, meaning the water vapor changes to liquid-vapor. Thus, the saturation level of air is related to the air's temperature.

Learn more about relative humidity here https://brainly.com/question/21494654

#SPJ2

Answer: A mole of something means that there are 6.02 X 10^23 of that something. So, a mole of methane molecules is 6.02 X 10^23 methane molecules. So, 1.5 moles of methane will contain 1.5*(6.02 X 10^23) = 9.0 X 10^23 methane molecules

Explanation:

Answer:

the reaction is violent and quick

Explanation:

Answer:

us fish and wildlife service

Explanation:

the 2nd choice

Answer:

US Fish and Wildlife Service

Answer:

i) B, ii) A, iii) C

Explanation:

give me brainliest

Answer:

sodium

Explanation:

Na is the symbol for sodium on the periodic table

Answer: Sodium is a chemical element with the symbol Na (from Latin "natrium") and atomic number 11. It is a soft, silvery-white, highly reactive metal. Sodium is an alkali metal, being in group 1 of the periodic table. Its only stable isotope is 23 Na.

Explanation:

Answer:

true

Explanation: