Explanation:
Depositional landforms are the visible evidence of processes that have deposited sediments or rocks after they were transported by flowing ice or water, wind or gravity. Examples include beaches, deltas, glacial moraines, sand dunes and salt domes.
hope it helps!
Suggest reasons for and against the inclusion of hydrogen in the main group of the periodic table
Answer:
See explanation
Explanation:
Hydrogen has only one valence electron. Sometimes, hydrogen is included as part of group 1 or 17 in the periodic table. Is this correct? Well, the answer to this question is not so straight forward!
Let us remember that hydrogen forms a univalent positive ion H^+ just like the group 1 elements, but it also forms a univalent negative ion H^- just like group 17 elements. Also, hydrogen is a gas and forms a molecular diatomic compound just like group 17 elements. This is not the case with other group 1 elements. We can see that hydrogen is chemically and physically dissimilar to other group 1 elements hence one can logically argue against its inclusion in group 1. Also, it is not a halogen, so we can also argue against its inclusion in group 17.
However, it is convenient to include hydrogen in the main groups 1 or 17 when discussing its chemical properties in order to make it easier to assimilate. If we place hydrogen in group 1, we can understand that it forms univalent positive ions. Similarly, if we place it in group 17, we understand that it forms univalent negative ions.
Most times hydrogen is just written separately at the top right corner of the periodic table and not as a member of any group because of the issues outlined above.
Hydrogen is placed in the main group of the periodic table since it has only one electron in it and it also behaves like alkali metal properties.
Hydrogen atom:Hydrogen forms a univalent positive ion [tex]H^+[/tex]group 1 elements, but it also forms a univalent negative ion [tex]H^-[/tex]group 17 elements. Also, hydrogen is a gas and forms a molecular diatomic compound just like group 17 elements.
This is not the case with other group 1 elements. We can see that hydrogen is chemically and physically dissimilar to other group 1 elements hence one can logically argue against its inclusion in group 1. Also, it is not a halogen, so we can also argue against its inclusion in group 17.
If we place hydrogen in group 1, we can understand that it forms univalent positive ions and if it is placed in halogen group it will form univalent negative ion.
Find more information about Hydrogen here:
brainly.com/question/25597694
Ethane (CH) is one of many compounds that burns in oxygen to form carbon dioxide and water, as represented by the equation.
2C2H6 + 702 4CO2 + 6H2O
Which substance is a product in this reaction?
Answer:
carbon dioxide and water.
Explanation:
Chemical equation:
2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O
Reactants are present on the left side of chemical equation while products are present on the right side of chemical equation. In given chemical equation ethane and oxygen are reactant while carbon dioxide and water are product.
The given reaction is combustion reaction. Ethane is burnt in the presence of oxygen and produces carbon dioxide and water.
The reaction also follow the law of conservation of mass.
This law was given by French chemist Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.
write the general strucktures of
A. ketone b. aldehyde c. carboxylic acid d. ester
A.ketone
R-CO-R
B.aldehyde
R-CH=O
c.carboxylic acid
R-COOH
d.ester
R-CO-O-C-R
which one does not share the same properties as the other
Si
Ti
At
Explain why
Answer:
Ti
Explanation:
Ti is titanium and does not share any similar properties with the likes of Si, silicon and At, astatine.
Titanium is a transition metal and a solid. Silicon and Astatine are non - metals. Silicon and Astatine also belongs to the p-block on the periodic table whereas Titanium is found on the d-block. Silicon and Astatine would prefer to take part in reactions where they can gain electrons because they are non metals whereas Titanium due to its metallic property would prefer a reaction where it can lose electrons.? C+? O2 +? CO2,
what is the maximum amount of CO2 which
could be formed from 13.19 g of C and 15.92 g
of O2?
Answer in units of g.
Look at the mole ratio in the balanced equation
2CO + O2 ==> 2CO2
3.44 mol O2 x 2 mol CO/mol O2 = 6.88 moles CO
Directions: Fill in the 12 steps in the decay of U-235 in the diagram below.
Begin with U-235 and finish with an
isotope of lead. The particles emitted in each step are listed below. Use the periodic table to find information about
mass numbers, atomic numbers, and chemical symbols. Place the correct symbol in the space corresponding to the
correct mass number and atomic number.
Answer:
SUPER MARIOLWEJHRTÑWQEGTPWIQETGQWKÑEJGBKSDLJBGKSJDLGB
Explanation:
A student has 2 rubber balls of the same size and weight. Ball A is still and Ball B is rolling.Ball B hits Ball A, and Ball A start moving. Why does Ball A start moving?
A). Ball A is repelled by Ball B ,
B). Ball B is attracted to Ball A ,
C). Ball B transfers energy to Ball A ,
D). Ball A transfers energy to Ball B
Answer:
C). Ball B transfers energy to Ball A
Explanation:
The motion of ball A is a because of the energy it acquires.
Ball A initially due to its position posses potential energy due to its position.
The moving ball B has kinetic energy due to the motion of this ball.
Due to the collision, momentum is transferred from the moving ball to the static one. As the momentum of the static ball changes, potential energy is converted to kinetic energy. The magnitude of the energy possessed by the static ball must be lesser than that of the moving.Answer:
c
Explanation:
How many protons, electrons, and neutrons? ANSWEN
2+
23
6521
26
Protons
Electrons
Neutrons
28
30
65
3-
31
Protons
Electrons
Neutrons
"As
57 Fe
32
3+
33
35
36
DRAGO
Protons
Electrons
Neutrons
14
ME
US
Answer:
maybe 20 butvam not sure ooo
The EPA tracks the amount of DDT that has entered into our water systems to ensure water safety. Calculate the ppm for a solution made by putting 2.7 g of DDT into a 59000 g of water. Assume masses are additive
a. 46 ppm
b. 0.0046 ppm
c. 4.6 ppm
d. 4.6 x 10^-5 ppm
jagsir saw his mother adding dried neem leaves to the metal vessel filled with wheat. jagsir asked the reason for this from his mother. what would be his mothers reply?
Answer:
Because i want to. would be the reply
Explanation:
VOTE ME BRAINLIEST PLSSSSSSSSS
Answer:
none of the above
option d
A hypothesis is a
a. concise statement of behavior that is always the same under the same conditions
b. set of quantitative data
C. tentative explanation or predication based upon experimental observations
d. well-tested unifying principle that explains a body of facts
e. mathematical formula that models a pattern of behavior
concise statement of behavior that is always the same under the same conditions
Answer:
the answer is c or d
Explanation:
you can cross out e because it dont make any sense
b thats just data
a is the definition of law
answer two quetions.......
Answer:5.=D
6.=B
Explanation:
Write down the name and symbol of the particle formed when the magnesium atom loses two electrons
Answer:
A magnesium atom must lose two electrons to have the same number electrons as an atom of the previous noble gas, neon. Thus, a magnesium atom will form a cation with two fewer electrons than protons and a charge of 2+. The symbol for the ion is Mg2+, and it is called a magnesium ion.
what is the empirical formula of a compound that is found to consist of 56% chorine and no other element except iron
Answer:
FeCl₂
Explanation:
Empirical formula is the simplest formula of a compound.
Mass percentage of Chlorine = 56%
Mass percentage Iron = 100 - 56 = 44%
Elements
Fe Cl
Percentage mass 44 56
moles 44/55.85 56/35.5
0.79 1.56
Divide by the smallest
number 0.79/0.79 1.56/0.79
1 2
The empirical formula of the compound is FeCl₂
Convert this word equation into a balanced formula equation, please.
Copper (II) nitrate reacts with aluminum to form aluminum nitrate and copper.
Answer:
3Cu(NO3)2 + 2Al —> 2Al(NO3)3 + 3Cu
Explanation:
From the question given above,
Copper (II) nitrate reacts with aluminum to form aluminum nitrate and copper. This can be obtained represent as follow:
Cu(NO3)2 + Al —> Al(NO3)3 + Cu
Thus, we can balance the above equation as follow:
Cu(NO3)2 + Al —> Al(NO3)3 + Cu
There are 2 atoms of N on the left side and 3 atoms on the right side. It can be balance by putting 3 in front of Cu(NO3)2 and 2 in front of Al(NO3)3 as shown below:
3Cu(NO3)2 + Al —> 2Al(NO3)3 + Cu
There are 3 atoms of Cu on the left side and 1 atom on the right side. It can be balance by putting 3 in front Cu as shown below:
3Cu(NO3)2 + Al —> 2Al(NO3)3 + 3Cu
There are 2 atoms of Al on the right side and 1 atom on the left side. It can be balance by putting 2 in front of Al as shown below:
3Cu(NO3)2 + 2Al —> 2Al(NO3)3 + 3Cu
Thus, the equation is balanced.
Using the balanced equation below,
how many grams of zinc would be
required to produce 9.65 g of zinc
hydroxide?
Zn + 2MnO2 + H20 → Zn(OH)2 + Mn203
Please help I need it for a test
Answer:
Mass = 6.538 g
Explanation:
Given data:
Mass of zinc hydroxide produced = 9.65 g
Mass of zinc required = ?
Solution:
Chemical equation:
Zn + 2MnO₂ + H₂O → Zn(OH)₂ + Mn₂O₃
Number of moles of zinc hydroxide:
Number of moles = mass/molar mass
Number of moles = 9.65 g/ 99.42 g/mol
Number of moles = 0.1 mol
now we will compare the moles of zinc and zinc hydroxide,
Zn(OH)₂ : Zn
1 : 1
0.1 : 0.1
Mass of zinc required:
Mass = number of moles × molar mass
Mass = 0.1 mol × 65.38 g/mol
Mass = 6.538 g
Answer: 6.35
Explanation:
giving brainliest answer it
Answer:
B as its not specific enough
solve the equation:
1) 3,2 m²= x dm²= x cm²
BRAINLIEST!!!!
Answer:
sin = (330)
csc = (60)
−4 = cot (−45)
Explanation:
im not sure what you were looking for, make me brainlest please?
Plzz tell me the answer u need help im kinda confused
All of the following are examples of an external stimulus except -
Group of answer choices
Ⓐ hunger.
Ⓑ sunlight.
Ⓒ a loud sound.
Stimuli are the senses that cause an organism to react. Internal sensations include things like hunger and thirst that are produced inside the body, hence option A is correct.
What is stimulus?A stimulus is a perceptible alteration in the internal or external surroundings of an organism's physical or chemical composition.
Sensitivity is the capacity of an organism or organ to recognize external stimuli and to respond appropriately to them.
A stimulation that comes from outside the organism is known as an external stimulus. Light is one example of an outside stimulation. Although it comes from outside the body, it has an impact there as well.
Therefore, sunlight and a loud sound are the examples of external stimuli, while hunger is an internal stimulus.
Learn more about stimulus, here:
https://brainly.com/question/1747649
#SPJ5
Let's say you asked how many moles of O2
are needed to react with 24 moles of C2H6.
Answer:
7
Explanation:
This base-catalyzed isomerization involves the following steps: 1. Deprotonation to form tetrahedral intermediate 1; 2. Collapse of the tetrahedral intermediate and bond cleavage to form enolate ion 2; 3. Proton transfer to form enolate ion 3; 4. Intramolecular aldol reaction to form tetrahedral intermediate 4. Write out the reaction on a separate sheet of paper, and then draw the structure of tetrahedral intermediate 1.
Answer:
Explanation:
The objective of this question is to show the stepwise reaction mechanism for the base-catalyzed isomerization. This mechanism is shown in the attached diagram below together with its intermediary and enolate ions.
please help GIVING brainliest
Answer:
heat wave
Explanation:
A high pressure system is a whirling mass of cool, dry air that generally brings fair weather and light winds. When viewed from above, winds spiral out of a high-pressure center in a clockwise rotation in the Northern Hemisphere.
How is the name of each element in the periodic table represented? A. The first two letters of the element's name are used for the table. B. Letters are assigned to each element by the scientist who discovered it. C. Letters are given to represent each element based on when it was discovered. D. One or two letters are used to represent the name of each element.
Answer:
D. One or two letters are used to represent the name of each element.
Explanation:
The name of each element in the periodic table is symbolized by one or two letters.
There different ways of achieving this. Sometimes;
the first letter of the name of the element is used to represent it for example, hydrogen = H the first two letters are sometimes used, for example Calcium Cathe Latin name is also used for example Gold is Aurum and is represented as Au.These are some of the ways of symbolizing the name of each element
What is the mass of 0.8 mole of water molecules.
Answer:14.4g
Explanation:
Put the elements in order from easiest to hardest to remove an electron. Ba,Be,Ca,Sr.
Answer:
Ba,Sr,Ca,Be
Explanation:
as atomic size increases ionisation potential decreases
What is the role of an R group in an amino acid?
A.) It represents the core group that is common to all amino acids.
B.) It gives all amino acids the same physical and chemical properties.
C.) It is the functional group that distinguishes one amino acid from another.
D.) It is the site where other amino acids bond to form polypeptide chains.
Answer:
C.) It is the functional group that distinguishes one amino acid from another.
Explanation:
An R group is also known as a random group and is one of the key components of an amino acid. It contributes to their wide variety.
The role of an R group in an amino acid as It is the functional group that distinguishes one amino acid from another. Option C is correct.
What are functional groups?The functional groups are the some groups of chemicals oh hydrogen and notrgen and oxygen or carbon combination like carboxylic acid they are combination of carbon and amines as they are amnio groups etc.
The R attached at the end represents the different functional gropus of amino acids in the chain of hydrocarbon compound or orgamic compounds as they are primay and secondry and tertiary amines.
Therefore, Option C is correct.The role of an R group in an amino acid as It is the functional group that distinguishes one amino acid from another.
Learn more about functional groups, here:
https://brainly.com/question/14618322
#SPJ2
What is the velocity of a plane that traveled 2,800 miles from New York to California in 5.0 hours?
Answer:
560 mph East
Explanation:
Velocity is just speed with direction pretty much.
help me in my this plzzz
Answer:
a is oxidation
b is reduction
c is reduction
d is oxidation
hope it helps you
Which of the following equations demonstrates an actual chemical reaction that forms a new substance?
A1: ZN + 2HCl → 2NCl2 + H2
A2: H2O + NaCl → H2O
A3: Zn + Al + Cu → Zn + Cu + Al
A4: C12H22O11 + H2O → H2O + C12H22O11
Answer: [tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex]
Explanation:
A chemical reaction is said to have occured when reactants react to form new products where the atoms undergo a change in bonding.
From the given reactions:
1. [tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex]
Here Zn combines with hydrochloric acid to form zinc chloride and hydrogen.
2. [tex]H_2O+NaCl\rightarrow H_2O[/tex]
Here water remains as such as no new substance is formed.
3. [tex]Zn+Al+Cu\rightarrow Zn+Cu+Al[/tex]
Here no new substance is formed.
4. [tex]C_{12}H_{22}O_{11}+H_2O\rightarrow H_2O+C_{12}H_{22}O_{11}[/tex]
Here no new substance is formed.
Thus [tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex] demonstrates an actual chemical reaction that forms a new substance
Answer:
hope this helps you!
Explanation:
Perform the following
mathematical operation, and
report the answer to the correct
number of significant figures.
1.987/3.46 = [?]
Answer:
.574
Explanation:
smallest number of digits in the expression was 3, so the final answer should have 3 sig figs