An enolate is an intermediate in the bromination of ketones under acidic conditions
An enolate is a type of carbanion intermediate that is formed by the deprotonation of a carbonyl group in an aldehyde or a ketone. It has a negatively charged carbon atom that is adjacent to a double-bonded oxygen atom (C=O) in the carbonyl group. Enolate intermediate can be formed by the addition of a strong base to a carbonyl compound, such as lithium diisopropylamide (LDA) or sodium hydride (NaH). Once formed, enolates can participate in a variety of chemical reactions, such as nucleophilic addition and substitution, condensation, and elimination reactions.
Learn more about ketone here:
https://brainly.com/question/16375869
#SPJ4
QUESTION 7 Can you use alligation for any type of liquid?
Answer:
Yes you can use alligation for a type of liquid. Explanation: Alligation is an old and practical method of solving arithmetic problems related to mixtures of ingredients.
Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Thus, we can use allegation for any type of liquid.
What is matter?
Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.
Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.
Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. Allegation is a form of liquid that we may utilize. Allegation is a time-tested and useful strategy for tackling mathematical issues involving combinations of elements.
Thus, we can use allegation for any type of liquid.
To learn more about matter, here:
https://brainly.com/question/4562319
#SPJ2
Give the coefficient of y in the following expression. 2xz² - 7xy + 4.
Answer:
the coefficient of y is -7
a molecure that contains 3 iddentical polar bonds to the central atom will be
ANSWER:
Nonpolar
sorry if I'm wrong
What is an extinct species? *
(10 Points)
O A. a species that blends in easily with its environment
O B. a species that resembles another species
O C. a species that was unable to adapt and died out
O D. a species that is bred for specific characteristics
Answer: C
Explanation: I got it right.
1 point
Which piece of apparatus can only measure a single fixed volume?
А250 cm beaker
B50 cm burette
С100 cm measuring cylinder
D25 cm pipette
Answer:
50 CM burette
Explanation:
bvffvvhjf
A food company produces raspberry coulis as a topping for its best-selling line, double strength chocolate mousse pie. Fresh raspberries comprising 5% seeds, 20% pulp solids, and 75% water are homogenised and placed in a stainless steel vat. Sugar is added to give a raspberry:sugar mass ratio of 3.5:1. The mixture is blended, strained to remove the seeds, then heated to reduce the water content to 35%. Half a tonne of coulis is produced every day.
Required:
a. What mass of raspberries is required per week?
b. How much sugar is required per week?
c. What is the sugar content of the coulis?
Answer:
5357.1429kg per week
2142.8571 kg per week
Explanation:
Given that :
Fresh Raspberries :
5% = seeds
20% = pulp solids
75% = water
Raspberry : Sugar = 3.5 : 1
Water content = 35%
Coulis produced per day = 0.5 tonnes
Mass of Raspberry produced per week :
Mass is measured in kg;
1 tonne = 1000kg
0.5 tonne = (1000/2) kg = 500kg
Mass of Coulis produced per week = 500kg * 7 = 3500kg
Coulis contains 35% water, Raspberry required 75% water :
(3500 / 35) * 75 = 7500kg
Raspberry : Sugar ratio = 3.5 : 1
Mass of Raspberry :
[7500 - (1 /3.5) * 7500]
7500 - 2142.8571
= 5357.1429kg per week
B.
Sugar required per week:
(1/3.5) * 7500kg
= 2142.8571 kg per week
C.)
Sugar content in coulis :
Which is correct order of the weather observed with each cloud type from 1 to 4?
A. Rain, thunderstorm, snow, fair
B. Light rain, fair, thunderstorm, fair
C. Light rain, thunderstorm, fair, fair
D. Hail, lightning, thunderstorm, fair
Answer:i thinks its A
Explanation:but who knows
what causes the different crusts to rise and lower?
Answer:
tectonic plates
Explanation:
PLS HELP ME WITH MY ASSIGNMENT WILL MARK BRAINLIEST!
Answer:
D. anions ; +1
Explanation:
Alkali metals tend to lose one electron and form ions with a single positive charge. 'alkali metals typically lose 1 eclectron to form anions with a charge of +1".
if an atom has 22 protons 28 neutrons 20 electrons what would its atomic number be
Answer:
22
Explanation:
The atomic number indicates the amount of protons, so it would be 22
PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP
DUE IN 5 MINUTES CHEMISTRY DIMENSIONAL ANALYSIS
In 2009, Usain Bolt ran 100 meters in 9.58 seconds. What is this speed in km/hr? (!! DIMENSIONAL ANALYSIS!! NOT A REGULAR PROBLEM)
Of the predators in the image, which one is most likely a keystone species?
O pine marten
O mountain lion
O eagle
O wolf
Answer:
mountian lion
Explanation:
Which of the following can be calculated from the mass of the reactants used in a chemical reaction? (Select all that apply)
Theoretical yield of products
Amount of limiting reactant used in a reaction
Actual yield of products
Amount of excess reactant from a reaction
Answer:
Can you explain it more please
Explanation:
Is nitric acid a strong or weak acid. Explain your answer.
Answer:
There are only a few (7) strong acids, so many people choose to memorize them. All the other acids are weak. The strong acids are hydrochloric acid, nitric acid, sulfuric acid, hydrobromic acid, hydroiodic acid, perchloric acid, and chloric acid.Explanation:
그것은 당신의 교육에 도움이 되기를 바랍니다
20 Points!! Which of the following is a synthesis reaction? AgNO3+NaCI--> AgCI+NaNO3
CH4+O2->CO2+H2O SO3+H2O-> H2SO4 Cu+AgNO3 ->Ag+CuNO3
6. Elements in column (group) 18 (8A) are called the________ and the outermost electrons are found in
the p sublevel. Color these elements a different color and reference this group on the legend.
Answer:
Noble gases
Explanation:
Noble gases have filled electron shells (group 18=8 electrons) and are all odorless, colorless, monatomic gases with very low chemical reactivity.
SUMMARY: Write a 3-4 sentence summary about molecules.
Answer:
molecules definition is that "a molecule is an electrical neutral group of two or more atoms held together by chemical bonds molecules are distinguished from ions by their lack of electrical charge." molecules have a part of many things we touch or come across in a everyday life. se example of theses things are water,nitrogen, glucose, and many other things.a molecule is an atom that forms a chemical bond with another atom.
Explanation:
there
Which half reaction is associated with the anode?
Sn(s) —> Sn2+ (aq) + 2e-
Sn2+ (aq) + 2e- → Sn(s)
Pb2+ (aq) + 2e-->Pb(s)
Pb(s)->Pb2+ (aq) + 2e-
Answer:
vgf
Explanation:
Answer:
its either A or B
Explanation:
took the test twice and guessed LOL
its not C or D :>
In fossil comparisons, it helps to know about similar:
living things
questions
incomplete remains
Answer:
Fossils tell us when organisms lived, as well as provide evidence for the Fossils are the preserved remains or traces of animals, plants, and other organisms from the past. Fossils, by comparing the anatomies of both modern and extinct species, allows scientists to study the skin, hair, and organs of ancient creatures.
Explanation:
A compound X has the following percentage composition 66.7% carbon, 11.1% hydrogen and 22.2% oxygen .Calculate the empirical formula of X.The relative molecular mass of X is 72 calculate the molecular formula
Explanation:
c. h. o
66.7%. 11.1%. 22.2%
____. ____. ____
12. 1. 16
1.558. 11.1. 1.39. (divide by the smallest)
1. 8. 1
empirical formula=ch8o
What are the three types of plate boundaries? What is the direction of movement at each boundary?
There are three kinds of plate tectonic boundaries: divergent, convergent, and transform plate boundaries.
This image shows the three main types of plate boundaries: divergent, convergent, and transform.
This image shows the three main types of plate boundaries: divergent, convergent, and transform. Image courtesy of the U.S. Geological Survey. Download image (jpg, 76 KB).
The Earth’s lithosphere, which includes the crust and upper mantle, is made up of a series of pieces, or tectonic plates, that move slowly over time.
A divergent boundary occurs when two tectonic plates move away from each other. Along these boundaries, earthquakes are common and magma (molten rock) rises from the Earth’s mantle to the surface, solidifying to create new oceanic crust. The Mid-Atlantic Ridge and Pacific Ring of Fire are two examples of divergent plate boundaries.
When two plates come together, it is known as a convergent boundary. The impact of the colliding plates can cause the edges of one or both plates to buckle up into a mountain ranges or one of the plates may bend down into a deep seafloor trench. A chain of volcanoes often forms parallel to convergent plate boundaries and powerful earthquakes are common along these boundaries.
At convergent plate boundaries, oceanic crust is often forced down into the mantle where it begins to melt. Magma rises into and through the other plate, solidifying into granite, the rock that makes up the continents. Thus, at convergent boundaries, continental crust is created and oceanic crust is destroyed.
Two plates sliding past each other forms a transform plate boundary. One of the most famous transform plate boundaries occurs at the San Andreas fault zone, which extends underwater. Natural or human-made structures that cross a transform boundary are offset—split into pieces and carried in opposite directions. Rocks that line the boundary are pulverized as the plates grind along, creating a linear fault valley or undersea canyon. Earthquakes are common along these faults. In contrast to convergent and divergent boundaries, crust is cracked and broken at transform margins, but is not created or destroyed.
On another planet, the isotopes of titanium have the given natural abundances.
Isotope Abundance
Mass (u)
46Ti
70.600%
45.95263
48Ti
12.900%
47.94795
50Ti
16.500%
49.94479
What is the average atomic mass of titanium on that planet?
an alloy is a metal that has?
An alloy always has two or more elements/metals in it. An alloy always has at least metal in it.
Steels have iron and carbon in it. Bronze is copper and tin, or aluminum, or manganese, or zinc. German silver isn't silver at all and contains copper, zinc, and nickel.
Hope this helps!
5 pos. 1. An excess of sodium sulfate was added to a 500. mL sample of polluted water. The
mass of lead (II) sulfate that precipitatcd was 308.88 mg. Determine the mass of lead that was in
the polluted water.
Na2SO4(aq) + Pb2+ (aq) → 2Na(aq) + PbSO4(s)
Answer:
[tex]m_{Pb^{2+}}=0.211gPb^{2+}[/tex]
Explanation:
Hello!
In this case, according to the stoichiometry of the reaction, it is possible to evidence the 1:1 mole ratio between lead (II) ions and lead (II) sulfate precipitate; that is why we can compute the mass of lead (II) in the polluted water as shown below:
[tex]m_{Pb^{2+}}=308.88mgPbSO4*\frac{1gPbSO4}{1000mgPbSO4} *\frac{207.2gPb^{2+}}{303.26gPbSO4} \\\\m_{Pb^{2+}}=0.211gPb^{2+}[/tex]
Best regards!
Sodium metal reacts with chlorine gas to produce crystals of sodium
chloride. Show phases in your equation.
Answer:
Na(s) + Cl(g) = NaCl(s)
Explanation:
s means solid
g means gas
Metals are solid at room temperature.
Crystals are solids
Beryllium oxide, Beo, is an electrical insulator. How
many moles of beryllium oxide qre in a 250 gram
sample of the compound?
Answer:
There are 10.0 moles of beryllium oxide in a 250 grams sample of the compound.
Explanation:
We can calculate the number of moles (η) of BeO as follows:
[tex] \eta = \frac{m}{M} [/tex]
Where:
m: is the mass = 250 g
M: is the molar mass = 25.0116 g/mol
Hence, the number of moles is:
[tex] \eta = \frac{250 g}{25.0116 g/mol} = 10.0 moles [/tex]
Therefore, there are 10.0 moles of beryllium oxide in a 250 grams sample of the compound.
I hope it helps you!
4)
On a hot day, your friend brings you some iced tea to cool off. Only, its unsweetened. You add sugar, but it just does not dissolve
fast enough. Which procedure would speed up the dissolving process?
A)
Add the sugar in the dark.
B)
Add larger crystals of sugar, or sugar cubes.
C)
Take the tea up to the top of a close mountain.
D)
• Take out the ice and stir it up outside where it is warmer.
Answer: D)
• Take out the ice and stir it up outside where it is warmer.
Explanation:
Answer:
thank you! I made it to an 100% on USA test prep...
the answer is: Take out the ice and stir it up outside where it is warmer.
Explanation:
I have a lot of rain last night when I go to bed. Stay safe!
How many atoms are in 12 moles of sodium?
Answer: There are 1.20 x 1024 atoms of sodium in 2 moles
Explanation:
where do coal,oil and natural gas came from?
Answer:
I hope it will help you
plz mark me as brainliest
plz thank my answer
Diffusion of Sucrose in Gelatin. A layer of gelatin in water 5 mm thick and con-taining 5.1 wt % gelatin at 293 K separates two solutions of sucrose. The concentra-tion of sucrose in the solution at one surface of the gelatin is constant at 2.0 g sucrose/100 mL solution, and 0.2 g/100 mL at the other surface. Calculate the flux of sucrose in kg sucrose/s
Answer:
the flux of sucrose is 9.072 × 10⁻⁷ kg sucrose / m² sec
Explanation:
Given the data in the question;
water-gelatin solution separating two different concentration solutions of sucrose; 5.1 wt % gelatin at 293 K; at this conditions diffusivity of sucrose in water gelatin solution is;
[tex]D_{AB}[/tex] = 0.252 × 10⁻⁹ m²/sec.
we know that; 1 L = 0.001 m³, 1mL = 0.001 L
[tex]C_{A1}[/tex] = 2.0 g sucrose/100 mL = 2.0 × 10⁻³ kg sucrose / 100 × 10 ⁻³ L
[tex]C_{A1}[/tex] = 2.0kg sucrose / 100 L
[tex]C_{A1}[/tex] = 2.0 kg sucrose / 100 × 10⁻³ m³
[tex]C_{A1}[/tex] = 20 kg sucrose / m³
[tex]C_{A2}[/tex] = 0.2 g sucrose/100 mL = 0.2 × 10⁻³ kg sucrose / 100 × 10⁻³ × 10⁻³ L
[tex]C_{A2}[/tex] = 2 kg sucrose / m³
Thickness ß = 5 mm = 5 × 10⁻³ m
Now, flux of sucrose in kg sucrose / m³sec will be;
using the formula, [tex]N_{A}[/tex] = [tex]D_{AB}[/tex] /ß ( [tex]C_{A1}[/tex] - [tex]C_{A2}[/tex] )
we substitute
[tex]N_{A}[/tex] = (0.252 × 10⁻⁹ m²/sec / 5 × 10⁻³ m) ( 20 kg sucrose / m³ - 2 kg sucrose / m³ )
[tex]N_{A}[/tex] = (0.252 × 10⁻⁶ / 5) × 18 kg sucrose / m² sec
[tex]N_{A}[/tex] = 4.536 × 10⁻⁶ / 5 kg sucrose / m² sec
[tex]N_{A}[/tex] = 9.072 × 10⁻⁷ kg sucrose / m² sec
Therefore, the flux of sucrose is 9.072 × 10⁻⁷ kg sucrose / m² sec