Which of the following is considered a standard unit of length in the United States?
O square inch
O acre
O cubic yard
O yard

Answer:DE2

Explanation:

Answer:

The open system evaporates the solvent in the solution

Explanation:

An open system is a system in which exchange of materials and energy can occur. If a TLC set up is left open, then the set up constitutes an open system.

During TLC, the sample is dotted on the plate and inserted into a suitable solvent. The solvent moves up the plate and achieves the required separation of the mixture.

Most of these solvents used used TLC are volatile organic compounds. Therefore, if the TLC set up is left open, the solvent will evaporate leading to poor results after running the TLC experiment.

Answer:

Partial

Explanation:

A strong acid will completely ionize in water while a weak acid will only partially ionize.

Answer: The correct option is A).

Explanation:

Precipitation reaction is defined as the reaction where a solid precipitate (solid substance) is formed at the end of the reaction. It is insoluble in water.

For the given chemical reactions:

A): [tex]2KI+Pb(NO_3)_2\rightarrow PbI_2+2KNO_3[/tex]

The iodide of lead is generally insoluble in water. Thus, lead iodide is a precipitate.

B): [tex]2AgNO_3+Ca(CH_3COO)_2\rightarrow Ca(NO_3)_2+2CH_3COOAg[/tex]

The nitrates and acetates of all metals are soluble in water.

C): [tex]3BaCl_2+Al_2S_3\rightarrow 2AlCl_3+3BaS[/tex]

The sulfide of barium is soluble in water.

D): [tex]SrBr_2+Mg(OH)_2\rightarrow MgBr_2+Sr(OH)_2[/tex]

The hydroxide of strontium is soluble in water.

Hence, the correct option is A).

Answer:

0.186 moles

Explanation:

In order to convert grams of PCl₅ into moles, we need to use its molar mass:

Then we proceed to calculate the number of moles:

In the given question Phosphorus pentachloride is used as a catalyst for certain chemical reaction. 38.7 g of [tex]\rm PCl_5[/tex], there are 0.186 moles of [tex]\rm PCl_5[/tex].

A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.

To calculate the number of moles in 38.7 g of [tex]\rm PCl_5[/tex], we need to divide the given mass of [tex]\rm PCl_5[/tex] by its molar mass.

The molar mass of [tex]\rm PCl_5[/tex] can be calculated by adding the atomic masses of one phosphorus atom and five chlorine atoms:

Molar mass of  [tex]\rm PCl_5[/tex] = (1 x atomic mass of P) + (5 x atomic mass of Cl)

= (1 x 30.97 g/mol) + (5 x 35.45 g/mol)

= 208.22 g/mol

Now, we can calculate the number of moles of  [tex]\rm PCl_5[/tex]:

Number of moles = mass / molar mass

= 38.7 g / 208.22 g/mol

= 0.186 moles

Therefore, there are 0.186 moles of  [tex]\rm PCl_5[/tex] in 38.7 g of  [tex]\rm PCl_5[/tex].

Learn more about catalyst here:

https://brainly.com/question/24430084

#SPJ6

Answer:

n=2, l= 1, m= 0, s = +1/2

Explanation:

An electron is described by four sets of quantum numbers;

I) principal quantum number (n)

ii) orbital quantum number (l)

iii)Magnetic quantum number (m)

iv) Spin quantum number (s)

The electronic configuration of fluorine is; 1s2 2s2 2p5

Hence, the sixth electron of fluorine is found in the 2p subshell where;

n=2, l= 1, m= 0, s = +1/2

Answer:

The answer is cell wall

Explanation:

Because it is

Answer:

4 m/s

Explanation:

formula is v = (KE/.5m)^1/2

there is a calculator

https://www.calculatorsoup.com/calculators/physics/kinetic.php

Answer:

Ionic compounds conduct electricity when molten (liquid) or in aqueous solution (dissolved in water), because their ions are free to move from place to place. Ionic compounds cannot conduct electricity when solid, as their ions are held in fixed positions and cannot move.

Explanation:

because their ions are free to move from place to place.

Answer:

A.

Explanation:

sana makatulong sayo

Answer:

555 g of CaCl₂

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

Ca + Cl₂ —> CaCl₂

From the balanced equation above,

1 mole of Cl₂ reacted to produce 1 mole of CaCl₂.

Next, we shall determine the number of mole of CaCl₂ produced by the reaction of 5 moles of Cl₂. This can be obtained as follow:

From the balanced equation above,

1 mole of Cl₂ reacted to produce 1 mole CaCl₂.

Therefore, 5 moles of Cl₂ will also react to produce 5 moles of CaCl₂.

Thus, 5 moles of CaCl₂ were obtained from the reaction.

Finally, we shall determine the mass of 5 moles of CaCl₂. This can be obtained as follow:

Mole of CaCl₂ = 5 moles

Molar mass of CaCl₂ = 40 + (35.5×2)

= 40 + 71

= 111 g/mol

Mass of CaCl₂ =?

Mass = mole × molar mass

Mass of CaCl₂ = 5 × 111

Mass of CaCl₂ = 555 g

Therefore, 555 g of CaCl₂ were obtained from the reaction.

Answer:

c

no need to thank me okay

Answer:The law of conservation of mass states that in a chemical reaction mass is neither created nor destroyed. ... The carbon atom changes from a solid structure to a gas but its mass does not change. Similarly, the law of conservation of energy states that the amount of energy is neither created nor destroyed.

Explanation:

Answer and Explanation:

The reaction is in the gas phase, so the equilibrium constant is expressed in terms of the partial pressures (P) of the products and reactants, as follows:

[tex]Kp = \frac{P^{2}_{SO_{3} } }{P_{SO_{2}} ^{2}P_{O_{2}} }[/tex]

We have the following data:

P(SO₃) = 2.6 atm

P(O₂) = 0.43 atm

We need Kp for this reaction. We can assume that in Appendix 4 we found that Kp = 7 x 10²⁴.

Then, we introduce the data in the equilibrium constant expression to calculate the partial pressure f SO₂ (PSO₂), as follows:

[tex]P_{SO_{2} } = \sqrt{\frac{P_{SO_{3} } ^{2} }{Kp P_{O_{2} } } } = \sqrt{\frac{(2.6 atm)^{2} }{(7 x 10^{24)}(0.43 atm) } } = 1.5 x 10^{-12} atm[/tex]

Therefore, the partial pressure of SO₂ is 1.5 x 10⁻¹² atm (for the given Kp).

Explanation:

search Filmy status hulk subscribe my channel

Answer:

[CO] = 0.078M

[Cl2] = 0.078M

[COCl2] = 0.477M

Explanation:

Based on the reaction:

CO(g) Cl2(g) ⇄ COCl2(g)

Where equilibrium constant, kc, is:

kc = 77.5 = [COCl2] / [CO] [Cl2]

[] represents the equilibrium concentration of each gas. The initial concentration of each gas is:

[CO] = 0.555mol/1.00L = 0.555M

[Cl2] = 0.555M

And equilibrium concentrations are:

[CO] = 0.555M - x

[Cl2] = 0.555M - x

[COCl2] = x

Where x is reaction coordinate

Replacing in kc expression:

77.5 = [x] / [0.555M - x] [0.555M - x]

77.5 = x / 0.308025 - 1.11 x + x²

23.8719 - 86.025 x + 77.5 x² = x

23.8719 - 87.025 x + 77.5 x² = 0

x = 0.477M. Right answer

x = 0.646M. False answer. Produce negative concentrations

Replacing:

And those concentrations are the equilibrium concentrations

A. Atoms can combine in many ways to form various compounds

and molecules.

Answer:

pH < 7; pH = 7; pH > 7

Explanation:

when dealing with an acidic base, you have the formula for [H3O+] > [OH-] which yields a pH < 7.

when you have a neutral base, the reactive ion concentration would be [H3O^+] = [OH^-] which yields a pH = 7.

finally, when dealing with a basic classification, the formula would be [H3O^+] < [OH^-] yields a pH > 7.

Answer:

A photon is absorbed by the atom.

More energy is emitted or absorbed for case 2

Explanation:

According to the Bohr model of the atom, electrons occur in energy levels. The energy of each level is fixed. However, electrons can absorb photons and move from a lower to higher energy level or emit photons and move from a higher to a lower energy level.

In each case, the energy absorbed or emitted is equal to the difference in energy between the two energy levels.

Since energy level 3 is much higher than energy level 2, the electron absorbs more energy in moving from energy level 1 to energy level 3 than it absorbs when moving from energy level 1 to energy level 2.

Answer:

See explanation

Explanation:

Conformation refers to the various spatial arrangements of atoms in a molecule that result from free rotation across the carbon-carbon single bond.

There are two possible conformations of cyclohexane. They are; the chair and boat conformations.

We can convert the molecule from one conformation to another by rotation of single bonds.

These conformations are not isomers. Isomers are different molecules while conformers are different spatial arrangements of the same molecule obtained by rotation across carbon-carbon single bonds. Isomers are not obtained by rotation across carbon-carbon single bonds.

Hence, the chair and boat conformers of cyclohexane are obtained by rotation across the carbon-carbon single bond hence they are conformers and not isomers.

Answer:

true once light has been produce it will keep travelling jn straight parts until it hits something else

Answer:

a) 0.11

b)76.9

c) 8.8

d) 1.7*10^-4

Explanation:

Step 1: Data given

K = 1.3 * 10^-2 for the reaction N2(g) + 3H2(g) ⇌ 2NH3(g)

Step 2: Formula of K

aA(g) + bB(g) ⇌ cC(g) + dD(g)

K = [C]^c *[D]^d  / [A]^a * [B]^b

K = 1.3 * 10^-2 = [NH3]² / [H2]³*[N2]

Step 3:

a) 1/2N2 + 3/2H2(g) ⇌ NH3(g)

N2(g) + 3H2(g) ⇌ 2NH3

1/2N2 + 3/2H2(g) ⇌ NH3(g)    =>K' =  [tex]\sqrt{K}[/tex]

K' = [tex]\sqrt{1.3*10^-2}[/tex] = 0.11

b. 2NH3(g) ⇌ N2(g) + 3H2(g)

N2(g) + 3H2(g) ⇌ 2NH3

2NH3(g) ⇌ N2(g) + 3H2(g)    =>K' = 1/K

K' = 1/(1.3*10^-2) = 76.9

c. NH3(g) ⇌ 1/2 N2(g) + 3/2H2(g)

N2(g) + 3H2(g) ⇌ 2NH3

NH3(g) ⇌ 1/2 N2(g) + 3/2H2(g)    

=>K' = [tex]\frac{1}{\sqrt{K} }[/tex]

K' = [tex]\frac{1}{\sqrt{1.3*10^-2} }[/tex]

K' = 8.8

d. 2N2(g) + 6H2(g) ⇌ 4NH3(g)

N2(g) + 3H2(g) ⇌ 2NH3

2N2(g) + 6H2(g) ⇌ 4NH3(g)

K' = K²

K' = (1.3*10^-2)²

K' = 1.7 *10 ^-4

Values of equilibrium constant at given temperature for the following reactions are 0.11, 76.9, 8.8 and 1.7 × 10⁻⁴ respectively.

Equilibrium constant is define as the ration of the concentrations of product to the concentrations of reactant with respect to the exponent of their coefficients.

Given chemical reaction is:

N₂(g) + 3H₂(g) ⇌ 2NH₃(g)

Equilibrium constant for this reaction is:

K = [NH₃]² / [N₂][H₂]³

K = 1.3 × 10⁻² (given)

1/2N₂(g) + 3/2H₂(g) ⇌ NH₃(g)

K₁ = √K

Because concentration of all given species is 1/2 of the given reaction, so value of K₁ will be written as:
K₁ = √(1.3 × 10⁻²) = 0.11

2NH₃(g) ⇌ N₂(g) + 3H₂(g)

K₂ = 1/K

Because concentration of reactant and products are reciprocal from the concentration of original given reaction, so value of K₂ will be written as:
K₂ = 1/1.3 × 10⁻² = 76.9

NH₃(g) ⇌ 1/2N₂(g) + 3/2H₂(g)

K₃ = 1/√K

Because concentrations of given species is reciprocal as well as half of the given original reaction, so value of K₃ will be written as:
K₃ = 1/√(1.3 × 10⁻²) = 8.8

2N₂(g) + 6H₂(g) ⇌ 4NH₃(g)

K₄ = K²

Because concentrations of given species is double of the given original reaction, so value of K₄ will be written as:
K₄ = (1.3 × 10⁻²)² = 1.7 × 10⁻⁴

Hence, the value of K for given reactions are 0.11, 76.9, 8.8 and 1.7 × 10⁻⁴ respectively.

To know more about equilibrium constant, visit the below link:
https://brainly.com/question/12858312

Answer:

D) Both polar and nonpolar.

Explanation:

Hello there!

In this case, according to the given statement, it turns out possible for us to bear to mind the fact the amphiphatic molecules are composed by two parts, the hydrophilic and the hydrophobic, being the former polar and the latter nonpolar as the example shown on the attached figure.

In such a way, we infer that the correct answer is D) Both polar and nonpolar.

Regards!

Answer:

For the HCCH Lewis structure you'll need to form a triple bond between the two carbon atoms. Hydrogen atoms only need two electrons for a full outer shell. There are a total of 10 valence electrons for the HCCH Lewis structure.

Answer:

See explanation

Explanation:

We define the formal charge on an atom in a molecule as the charge it carries assuming that electrons in all chemical bonds of the molecule were shared equally between atoms irrespective of the electronegativity of each atom.

The formula for calculating the formal charge on an atom in a molecule is;

Formal Charge = [number of valence electrons on neutral atom] – [(number of lone electron pairs) + (½ number of bonding electrons)] ·

The formal charge on the two nitrogen atoms in diazomethane is obtained as follows;

Middle nitrogen atom = 5 – 8/2 – 0 = +1

Last nitrogen atom = 5 – 4/2 – 4 = –1

The Lewis structure of the molecule is shown in the image attached.

Answer: The ratio of AD to DB is equal to the ratio of AE to EC. In other words, the pairs of lengths are proportional.

Explanation:

Sample answer from plato

Answer:

The pairs of lengths are proportional, because, the ratios of AD and DB are the exact same, so they are equal to the ratios of the set AE and EC.

Explanation:

It is rewritten from a sample answer from Plato just to be safe from plagiarism.

Answer:

ECUACIÓN:HClO 2 + H 2O → ClO− 2 + H 3O

ACIDO: HClO2

BASECONJUGADA:ClO-2

Explanation:

Answer:

Concentration C = 0.0189 mol/L

Explanation:

From the given information:

Let consider the formula used in calculating the concentration according to Beer's law:

[tex]\mathtt{A =\varepsilon \times L \times C}[/tex] --- (1)

here;

A = absorbance

ε = coefficient of molar absorptivity

L = path length

C = concentration (mol/L)

Also, from Beer law plot:

y = mx+b

where,

y represent absorbance A

b represents intercept

m represents the coefficient of molar absorptivity ε

and x represents the concentration(C).

replacing the substituted entities

A = ε × C + b ---- (2)

Making the concentration the subject of the above formula:

[tex]C = \dfrac{A-b}{\varepsilon}[/tex]----(3)

From y = 11.589x - 0.0002

A = 11.589 *C - 0.0002

Given that:

A = 0.219

∴

0.219 = 11.589 *C - 0.0002

0.219 + 0.0002 =  11.589 *C

C = 0.2192/11.589

C = 0.0189 mol/L

Answer:

b

Explanation:

Answer:

B

Explanation: