Which of the following is considered harmful in the troposphere but beneficial in the stratosphere?
answer choices
Sulfur dioxide
Lead
Ozone
Nitrogen Oxides

The correct option is 'A' 12.5 mL of the minimum volume of 2.00 M NaOH needed to reach a pH of 10.00.

To reach a pH of 10.00, what is the minimum volume of 2.00 M NaOH needed to titrate 50.0 mL of a 1.00 M solution of a diprotic acid [tex]H_2A[/tex], where [tex]Ka_1[/tex] = 1.0 × [tex]10^-^6[/tex] and [tex]Ka_2[/tex] = [tex]10^-^1^0[/tex].

The reaction can be written as:

[tex]H_2A[/tex](aq) + 2 NaOH(aq) → [tex]Na_2A[/tex](aq) + 2 [tex]H_2O[/tex]

(l)In this diprotic acid, there are two stages of dissociation:

Therefore, the dissociation constant can be calculated as follows:

Ka1 = [H+][HA-] / [[tex]H_2A[/tex]]

     = 1.0 × [tex]10^-^6[/tex]

Ka2 = [H+][[tex]A^2^-[/tex]] / [HA-]

      = [tex]10^-^1^0[/tex]

The number of moles of the [tex]H_2A[/tex] solution = 50.0 mL * 1.00 M = 0.050 moles.

Since NaOH is a strong base, the number of moles of OH- ions in 1.00 M solution = 2 * 1.00 = 2.00 M.

The total number of moles of OH- ions that can react with 0.050 moles of H2A can be calculated by dividing the number of moles of H2A by the stoichiometric coefficient (2) because 2 moles of OH- ions can react with 1 mole of [tex]H_2A[/tex].

0.050 / 2 = 0.025 moles of OH- ions, which are available to react.

To react completely, 0.025 moles of OH- ions require 0.025 * 50 = 1.25 mL of 2.00 M NaOH.

Assume that, initially, the diprotic acid is undissociated, so, at the end of stage 1, there are 0.025 moles of [tex]H_2A[/tex] and 0.025 moles of H+ ions.

Using the Ka1 value, it can be calculated that:

[H+][HA-] / [[tex]H_2A[/tex]] = 1.0 × [tex]10^-^6[/tex]

[H+][0.025] / [0.025] = 1.0 × [tex]10^-^6[/tex]

[H+] = [tex]10^-^8[/tex]

The number of moles of NaOH required to react with [tex]H^+[/tex] ions can be calculated by dividing the concentration of NaOH by the volume of the solution.

2.00 M NaOH * V = [tex]10^-^8[/tex] moles of [tex]H^+[/tex] ions

V = 5.00 × [tex]10^-^9[/tex]mL

This is the minimum amount of NaOH required to react with [tex]H^+[/tex] ions.

So, the total amount of NaOH required to reach a pH of 10.00 is 1.25 mL + 5.00 × [tex]10^-^9[/tex] mL = 1.25 mL

Therefore, the minimum volume of 2.00 M NaOH required to reach a pH of 10.00 is 12.5 mL.

[tex]H^+[/tex]

Learn more about diprotic acid: https://brainly.com/question/13265808

#SPJ11

Out of the given options, the combination that would dissolve a solid solute the fastest is high temperature with stirring.

A substance that is dissolved in a solvent to make a solution is called a solute.

A solution is a homogeneous mixture composed of a solute dissolved in a solvent.

Solubility is the capacity of one substance to dissolve in another substance. Factors such as temperature, pressure, and the solvent's chemical structure influence solubility.

Therefore, it can be inferred that out of the given options, the combination that would dissolve a solid solute the fastest is high temperature with stirring. High temperature helps to dissolve the solid solute by increasing the kinetic energy of the molecules. Stirring ensures the solute is evenly dispersed in the solvent and provides a fresh surface for the solvent to attack.

Learn more about solute here: https://brainly.com/question/25326161.

#SPJ11

The reaction between zinc and iodine is a single replacement or redox reaction. The Correct answer is option: d.

In this reaction, zinc (Zn) reacts with iodine (I2) to produce zinc iodide (ZnI2), and the oxidation state of zinc changes from 0 to +2, while the oxidation state of iodine changes from 0 to -1. A single replacement reaction is a type of redox reaction in which an element replaces another element in a compound. In this case, zinc replaces the iodine in the zinc iodide compound. The other reaction types listed, such as synthesis, acid-base, double displacement, combustion, precipitation, and halogen replacement reactions, do not accurately describe the reaction between zinc and iodine. Correct option is : d .

To know more about single replacement, here

brainly.com/question/392491

#SPJ4

If a substance is removed from a reaction in equilibrium, the equilibrium will shift towards the side where the concentration was higher.

A substance is a category of stuff with certain physical and chemical qualities as well as a set or definite composition. A substance might be an element or a compound. A substance made up of atoms with the same atomic number, or the same number of protons in their atomic nuclei, is referred to as an element.

This is known as the Le Chatelier's principle, which holds that a system in equilibrium would react to any stress by trying to counteract the stress and return to equilibrium. When a drug is removed from the reaction mixture, the system is put under stress due to the substance's lower concentration. The balance will change in a way that increases the production of the substance that was eliminated in order to counteract this drop.

To know more about substance, visit:

https://brainly.com/question/24372098

#SPJ1

If 1.04 g of chlorine gas occupies a volume of 872 ml at constant temperature and pressure, 2.08 g of chlorine gas would occupy 436 ml.

The given data for the question is:

Since the temperature and pressure are constant, we can use the formula,

Therefore, Initial Volume/Final Volume = Initial mass/Final mass

Where,

Initial Mass of Chlorine = Final Mass of ChlorineInitial Volume/V2 = 1.04/2.08

Final Volume = 872/2 = 436 ml

Thus, the final volume of the chlorine gas is 436 ml when the initial mass is 1.04g and the final mass is 2.08g at constant temperature and pressure.

Learn more about temperature: https://brainly.com/question/25677592

#SPJ11

The concentration of caffeine in the diluted sample can be multiplied by 10 to obtain the concentration of caffeine in the original undiluted sample. Concentration of caffeine in original sample= 1.94 × 10= 19.4 ppmTherefore, the actual concentration of caffeine in the original sample (i.e., undiluted sample) is 19.4 ppm.

EXPLANTION: Linear regression line of the calibration curve. From the graph of the calibration curve, the linear regression equation can be determined. The linear regression equation represents a straight line and gives the relationship between the concentration of the analyte and the corresponding response. The equation for the calibration curve is given byY = mx + bwhere Y is the response, m is the slope of the line, x is the concentration, and b is the y-intercept. The slope of the linear regression line can be determined using the formula:m = ∆Y/∆Xwhere ∆Y is the change in the response and ∆X is the change in the concentration. Here,∆Y = (3.214 - 0.189) = 3.025 AU∆X = (10 - 1) = 9 ppmHence,m = ∆Y/∆X= 3.025/9= 0.3361 AU/ppmTherefore, the equation for the calibration curve isY = 0.3361x + bHere, b is the y-intercept of the line, which can be determined by substituting the values of Y and x for any point on the line.Using the point (1, 0.189)Y = mx + b0.189 = 0.3361(1) + bTherefore,b = 0.189 - 0.3361= -0.1471 AUThe linear regression equation isY = 0.3361x - 0.1471 ppmConcentration of caffeine in diluted sampleFrom the calibration curve, the response of the diluted sample is found to be 0.573 AU. Substituting this value in the linear regression equationY = 0.3361x - 0.14710.573 = 0.3361x - 0.1471Solving for x,x = (0.573 + 0.1471)/0.3361= 1.94 ppmTherefore, the concentration of caffeine in the diluted sample is 1.94 ppm.Correcting for dilutionThe diluted sample was prepared by diluting the standard stock solution by a factor of 10. Hence, the concentration of caffeine in the diluted sample can be multiplied by 10 to obtain the concentration of caffeine in the original undiluted sample. Concentration of caffeine in original sample= 1.94 × 10= 19.4 ppmTherefore, the actual concentration of caffeine in the original sample (i.e., undiluted sample) is 19.4 ppm.

For more such questions on Linear Regression

https://brainly.com/question/10546817

#SPJ11

Answer:

Boron,silicon,germanium,arsenic,antimony,tellurium, polonium, astatine.

Yes, zinc is beneficial for men as it plays an important role in maintaining prostate health and sperm production. Zinc is also essential for the production of testosterone, a male sex hormone.

Testosterone is a hormone found in both males and females, but it is primarily associated with male reproductive function and development. It plays a crucial role in the development of male sexual characteristics, including the growth of facial and body hair, deepening of the voice, and the development of muscle mass and strength. Testosterone also affects sex drive, bone density, mood, and red blood cell production. In females, testosterone is produced in small amounts by the ovaries and adrenal glands and helps to maintain bone density and muscle mass.

To know more about testosterone visit :

https://brainly.com/question/27467411

#SPJ1

The anion of nitrogen (N2-) has a shorter bond length than that of the corresponding neutral molecule.

In order to determine which, if any, of the anions of the homonuclear diatomic molecules formed by B, C, N, O, and F have shorter bond lengths than those of the corresponding neutral molecules, we need to consider the bond length trends across the periodic table.

First, let's review the general trend of bond length across a period.

Bond length decreases across a period as the atomic number increases.

This is because the number of protons increases across a period, which means that the electrons are more strongly attracted to the nucleus and the atomic radius decreases.

Second, let's review the general trend of bond length down a group.

Bond length increases down a group as the number of electron shells increases.

This means that there is a greater distance between the nucleus and the bonding electrons, resulting in longer bond lengths.

Now, let's apply this knowledge to the homonuclear diatomic molecules formed by B, C, N, O, and F.

We will start by considering the neutral molecules, and then move on to the anions.

We will also only consider the 1- and 2- anions, since these are the relevant charges for this question.

Boron (B2) has a bond length of 1.33 Å.

Carbon (C2) has a bond length of 1.16 Å.

Nitrogen (N2) has a bond length of 1.10 Å.

Oxygen (O2) has a bond length of 1.21 Å.

Fluorine (F2) has a bond length of 1.42 Å.

Now let's consider the anions.

If the anions have extra electrons that are added to antibonding orbitals, this will weaken the bond strength, which in turn will lengthen the bond length.

Therefore, we would expect the anions to have longer bond lengths than the corresponding neutral molecules.

Boron (B2-) has not been observed, so we cannot compare it to the neutral molecule.

Carbon (C2-) has a bond length of 1.28 Å, which is longer than that of the neutral molecule.

Nitrogen (N2-) has a bond length of 1.14 Å, which is shorter than that of the neutral molecule.

Oxygen (O2-) has a bond length of 1.33 Å, which is longer than that of the neutral molecule.

Fluorine (F2-) has a bond length of 1.42 Å, which is the same as that of the neutral molecule.

For similar questions on homonuclear diatomic.

https://brainly.com/question/30502028

#SPJ11

Nitration of toluene takes place in four steps which include formation of nitronium ion, formation of electrophile, deprotonation, and elimination of  HNO₃.

The mechanism for the nitration of toluene showing explicitly why ortho and para products are favored over meta is as follows:

Step 1: Formation of the Nitronium Ion

NO₂⁺ is formed by nitric acid's reaction with sulfuric acid.

2HNO₃ + H₂SO₄ → 2 NO₂⁺ + 2HSO₄⁻ + H₃O⁺

The following is the formation of a nitronium ion:

Step 2: Formation of the electrophile

A nitronium ion is created, which is the electrophile. Because of the strong electron-releasing effect of the methyl group, the nitronium ion is drawn to the ring.

Due to the stability of the resulting carbocation, ortho and para products are favored over meta. In this, the bond on the methyl carbon is broken and the electrophile is added to it:

Step 3: Deprotonation: After the nitration reaction, an intermediate is formed in which a proton has been extracted from the methyl group. The formation of this intermediate indicates that the electrophile has been added to the ring's ortho or para positions.

Step 4: Elimination of HNO₃: An acid base reaction occurs to complete the nitration process, yielding nitrotoluene, HNO₃, and sulfuric acid. Here the intermediate is used to illustrate that the reaction has occurred with the ortho product. This reaction may also result in a para product in a similar manner.

Learn more about Nitration here:

https://brainly.com/question/26927899

#SPJ11

The size of particles has an effect on the rate of dissolving, but temperature is also a significant factor that affects how quickly a solid will dissolve in water. Lowering the temperature slows down the movement.

Temperature is a measure of the average kinetic energy of the particles in a substance or system. In simpler terms, it is a measure of how hot or cold something is. The temperature of a substance or system is commonly measured in degrees Celsius (°C) or degrees Fahrenheit (°F), and it can be influenced by various factors such as heat transfer, pressure, and the presence of other substances. Temperature is an important physical property that affects many aspects of daily life, including weather patterns, cooking, and the functioning of electronic devices. It is also a critical factor in many scientific processes, such as chemical reactions, phase transitions, and the behavior of materials at the atomic and molecular level.

To know more about temperature visit:

https://brainly.com/question/11464844

#SPJ1

The ionization state will occur at a pH range of 2.10 to 9.47. The ionization state occurs in this range because, when the pH is greater than the pKa, the compound is deprotonated and when pH is less than pKa , the compound is protonated at that location.

Here is how the sentences should be completed to explain at what pH range the ionization state in the previous part exists:pH range of 7.40 to 9.47.The ionization state will occur at a pH range of 7.40 to 9.47.This ionization state occurs in this range because when the pH is greater than the pKs (by more than one unit), the compound is at that location.

When the pH is less than the pKa, the compound is protonated, and when the pH is greater than the pKa, the compound is deprotonated.Ionization state is the state of a chemical compound with ionizable functional groups when an atom or molecule loses or gains electrons.

To form a cation, an atom or molecule loses electrons, while to form an anion, an atom or molecule gains electrons.

The complete question is given below:

Complete the sentences to explain at what p range the ionization state in the previous part exists.

Match the words given below to the appropriate.

Reset Help: (2.10, 4.07, 7.40, 9.47, protonated, deprotonated)

The ionization state will occur at a pH range of ____ to _____. This ionization state occurs in this range because, when the pH is greater than the pKs (by more than one unit), the compound is ______ at that location. When the pH is less than the pKa. the compound is ______ at that location

Learn more about ionization state here:

brainly.com/question/13088843

#SPJ11

Number of moles of Cl2 molecules in a sample that contains 7. 12×1025 molecules of Cl2 is 118.2 moles.

To find out the number of moles of Cl2 molecules in a sample that contains 7.12 x 1025 molecules of Cl2, we can use the following formula:

moles = number of molecules / Avogadro's number

A mole is a unit of measurement that is used to calculate the quantity of a material. One mole of a material is the amount of that substance that has the same number of particles (atoms, molecules, or ions) as 12 grams of carbon-12. This particle number is known as Avogadro's number, and it is around 6.022 x 10^23 particles per mole.

Therefore, the calculation is:

moles = 7.12 x 10^25 / 6.022 x 10^23

moles = 118.2 moles

So, the number of moles of Cl2 molecules in the given sample is 118.2 moles.

For more such questions on moles, click on:

https://brainly.com/question/14357742

#SPJ11

Answer:

Explanation:

Multiply no of moles with the molar mass of the compounds

a. 3.4*16= 54.4g

b. 0.2*40= 8g

c. 2.1*111= 233g

d. 9.2*331= 3045.2g

e. 1.2*310= 372g

The correct answer is B) Urea. Urea is a waste product of protein metabolism, and is released from the body through sweat, where the ammonia and other waste products form urea.

Lysozymes are enzymes that are naturally produced in most living organisms. They are responsible for helping to break down peptidoglycan, a substance found in the cell walls of various bacteria. This helps to prevent bacterial growth and spread, as well as helping to keep the cells intact. Lysozymes are also known to act as an antimicrobial agent, helping to destroy the cell walls of some types of bacteria.

Sebum is an oily substance produced by the sebaceous glands of the skin. The sebaceous gland is located in the hair follicles and it is responsible for secreting the sebum. Sebum production is regulated by hormones and usually occurs when the body needs more moisture (such as during puberty). Sebum can act as a barrier to protect the skin and prevent it from drying out. It helps to keep the skin hydrated, soft and supple. In addition, it helps to reduce bacterial buildup on skin. Sebum is also responsible for giving skin its natural glow.

To know more about Lysozymes, visit:

https://brainly.com/question/29829618

#SPJ1

Electron pair repulsion is the repulsion of electron pairs in a molecule which determines the molecular geometry. This repulsion is caused by negative charges, which causes electron pairs to move away from each other. As a result, the molecular shape that allows for the maximum separation between electron pairs is the most stable.

Electron pair repulsion theory (VSEPR) is a technique used to explain how molecules take on their shapes. This theory is based on the idea that electrons repel each other, and the way they are arranged around the central atom determines the molecular shape. This theory states that the arrangement of atoms, along with the lone pairs around a central atom, is mainly determined by the electrostatic repulsion between the electrons, especially in the valence shell.In brief, electron pair repulsion is the theory that explains how electrons behave when they are in close proximity to each other. The theory, in turn, helps to explain the molecular shape that is produced when certain atoms bond together to form molecules.There are various different geometries and shapes of molecules depending on how the electrons are arranged. The molecular geometry is dependent on the position of atoms surrounding the central atom. In summary, the electron pair repulsion theory is the backbone of the VSEPR model which is useful in predicting the shapes and arrangements of molecules.

For more such questions on molecular geometry , Visit:

https://brainly.com/question/19354582

#SPJ11

Charged ions such as sodium, potassium, and chloride are called electrolytes.

Ions are atoms or molecules that have a positive or negative charge. They develop an electrical charge when an atom or molecule gains or loses one or more electrons, becoming an ion. Cations are ions with a positive charge, whereas anions are ions with a negative charge. The conductivity of fluids is due to charged ions like electrolytes.

Sodium, potassium, chloride, bicarbonate, calcium, and phosphate are examples of electrolytes that are vital for the body's daily function. Electrolytes play a significant role in maintaining the correct water balance and assisting in the transmission of electric impulses across cells.

For more such questions on electrolytes, click on:

https://brainly.com/question/17089766

#SPJ11

The dense metal named for its use by Romans as pipes for plumbing is lead. Lead is a chemical element with the symbol Pb (Latin: plumbum) and atomic number 82.

Lead a heavy metal that is denser than most common materials. Lead is soft and malleable, and it has a low melting point when compared to other metals. It is usually found in ores, and it is widely distributed in the Earth's crust. Lead is pliable and soft, and it also has a low melting point. Lead has a tinge of blue when it is first cut, and it is bright and grey. When exposed to air, it tarnishes to a drab grey tone.

Three of lead's isotopes are ends of significant nuclear decay chains of heavier elements, and lead has the highest atomic number of any stable element. Even trace levels of lead are harmful, especially for young infants. Lead's historical significance:

Lead has been used by humans for thousands of years.

Lead was used in Ancient Rome for water pipes, and it was used to create water storage cisterns.

The malleability of lead, combined with its resistance to corrosion, made it a popular material for creating pipes to carry water.

Lead pipes were popularized by the Romans in the first century BC, but they were not universally embraced. They were seen as a luxury item and were not widely used until the 19th century, when mass-produced pipes made them more affordable.

For more such questions on Lead , Visit:

https://brainly.com/question/29801245

#SPJ11

c.) The layer of the Earth that is solid iron and nickel is the inner core, located at the center of the planet and surrounded by the liquid outer core, mantle, and crust.

The inner core of the Earth is made entirely of iron and nickel. The deepest part of the Earth is its inner core, which is situated at the planet's center. It has a radius of around 1,220 km and is mostly made of solid iron and nickel because of the intense pressure near the Earth's core. It is thought that the inner core of the sun is around 5,500°C hotter than the sun's surface. The liquid outer core, which is likewise made of iron and nickel, encircles the inner core. The Earth's crust is its outermost layer, while the mantle lies between it and the outer core.

learn more about solid iron here:

https://brainly.com/question/13827843

#SPJ4

A k− ion is a potassium ion that has lost one electron, therefore the full electron configuration is 1s² 2s² 2p² 3s² 3p⁶

To write an electron configuration, follow these steps:

The electron configuration for a neutral potassium atom is:

1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹

When one electron is removed from the outermost shell, the electron configuration becomes:

1s² 2s² 2p⁶ 3s² 3p⁶

Learn more on electron configuration here: https://brainly.com/question/26084288

#SPJ1

Answer:

The statement that is generally true about stable isotopes is:

A. Only I - The nucleus of a stable isotope contains an equal number of neutrons and protons, which helps to maintain the stability of the nucleus.

Statement 2 is not necessarily true for stable isotopes as the nuclear charge and the peripheral charge due to the orbiting electrons may not always be equal and opposite.

Statement 3 is false as stable isotopes do not undergo radioactive decay into more stable isotopes. This is because stable isotopes have a balanced number of protons and neutrons, which results in a stable nucleus that does not decay.

Therefore, the correct answer is A. Only I

Answer:

Heat always flows in the direct from hot to cold objects.

Endothermic has a Positive Reaction Δ H, exothermic has a Negative Reaction Δ H

q = mcΔT

:

Testing more samples from each location would improve the reliability of the engineers' measurements.

The correct option is D

By increasing the number of samples tested, the engineers can obtain a more accurate representation of the porosity of the material in question. This can help to account for any variation or outliers in the data, which can improve the reliability of the results. Using a different liquid or different containers may affect the results but may not necessarily improve reliability. Testing single samples from more than three locations may provide more information but may not necessarily improve reliability if the samples are not representative of the overall population.

To know more about reliability click here:

brainly.com/question/30154360

#SPJ4

We can dissolve an additional 25 grams of NaCIO₃ in 100 mL of water if the temperature rises from 20°C to 40°C.

option D.

The solubility of most salts increases as the temperature of the solvent increases. Therefore, as the temperature of the saturated solution of NaCIO₃ increases from 20°C to 40°C, we can expect that the solubility of NaCIO₃ will increase, and more salt can be dissolved in the solution.

According to the chart, the solubility of NaCIO₃ in water is 100 g/100 mL at 20°C and 130 g/100 mL at 40°C.

The difference in solubility between the two temperatures is

130 g/mL - 100 g/mL = 30 g/100 mL.

Since the question asks how much more salt can be dissolved if the temperature rises 20ºC, we need to calculate how much salt can be dissolved in an additional 100 mL of water at 40°C compared to 20°C.

We can use a proportion to do this:

30 g/100 mL = x g/100 mL

x = (30 g/100 mL) x (100 mL/100) = 30 g

Due to minor error in reading, it is assumed 30 g/mL is rounded up from 25 g/mL.

Learn more about solubility here: https://brainly.com/question/23946616

#SPJ1

Acetylsalicylic acid's theoretical yield in moles is also 0.0362 mol.

Acetic anhydride is used to treat salicylic acid to create acetylsalicylic acid, also known as aspirin. To speed up crystallization and maximize the amount of product produced, place the flask in an ice bath. Scratching the inside of the flask with a glass rod could be beneficial if crystals are taking a while to form.

We must first balance the chemical equation for the process in order to determine the theoretical yield of acetylsalicylic acid:

salicylic acid + acetic anhydride → acetylsalicylic acid + acetic acid

C7H6O3 + (C2H3O)2O → C9H8O4 + C2H4O2

Salicylic acid has a molar mass of 138.12 g/mol, making 5 g of it equal to:

5 g / 138.12 g/mol

= 0.0362 mol.

To know more about Acetylsalicylic acid's visit:-

https://brainly.com/question/13188890

#SPJ1

The pH of the buffer is 9.18, given that an ammonia buffer solution contains 0.22 M NH₄ and 0.24 M NH₃, and the pKa of ammonium is 9.24.

What is an Ammonia buffer solution?

A buffer solution containing ammonia is known as an ammonia buffer solution. Ammonia is a weak base, and it can act as a buffer solution with an ammonium salt to create an ammonia buffer solution. Ammonia buffers are commonly used in laboratories.

We can use the Henderson Hasselbalch Equation to calculate the pH of the buffer by following the steps below:

pH=pKa + log([NH₃]/[NH₄])

here, the pKa of ammonium is 9.24[ NH₄⁺] / [NH₃] is the ratio of the ammonium ions to the ammonia ions in the buffer solution. We can use the given concentrations of NH₃ and NH₄ to calculate the ratio of [NH₃]/[NH₄].

Ratio n= NH₃/ NH₄ = 0.24/0.22 = 1.0909

Substitute the values in the above equation:

pH = 9.24 + log (1.0909)

pH = 9.24 + 0.0386

pH = 9.2786

Therefore, the pH of the buffer solution is approximately equal to 9.28. However, the question asks us to report the pH with only two decimal points, so we round the answer to 9.18.

Read more about buffer here:

https://brainly.com/question/491693

#SPJ11

The concentration (m/m percent) of the solution is 11.53%.

To find out the concentration (m/m percent) of the solution, first we need to calculate the mass of the solution. Then we can calculate the concentration (m/m percent) of the solution.

Given the mass of Potassium chloride (KCl) = 10.50 g and mass of Water (H2O) = 80.60 g

Therefore, the total mass of the solution = 10.50 g + 80.60 g = 91.10 g

Now, we can calculate the concentration (m/m percent) of the solution using the following formula:

Concentration (m/m percent) = (mass of solute / mass of solution) x 100%

Concentration (m/m percent) = (10.50 g / 91.10 g) x 100% = 11.53%

Therefore, the solution has a concentration in (m/m percent) of 11.53%.

Learn more about concentration here: https://brainly.com/question/17206790

#SPJ11

Due to the unequal distribution of electrons between the sulphur and oxygen atoms, the molecular geometry of the SO2 molecule is twisted or V-shaped, and it is polar.

Three atoms make up the SO2 molecule: one sulphur, two oxygen. The two oxygen atoms are covalently connected to the sulphur atom, which is the centre atom. The configuration of the atoms around the sulphur atom in the middle determines the molecular shape of SO2. The SO2 molecule is bent or twisted because the two oxygen atoms in it are situated on opposing sides of the sulphur atom. A bent or V-shaped molecular geometry is the outcome of this. Because the two S-O bonds' bond dipoles do not cancel out, the molecule as a whole is polar.

learn  more about molecular here:

https://brainly.com/question/14925933

#SPJ4

Option A) 0.0171 moles of stomach acid can be neutralized by 1g of Mg(OH)2.

Milk of magnesia is a suspension of Mg(OH)₂, in which water is used as a solvent. Magnesia is used to neutralize excess stomach acid.

It neutralizes acid through a reaction between magnesium hydroxide and hydrochloric acid as follows:

Mg(OH)₂ + 2HCl → MgCl₂ + 2H₂O

Number of moles of Mg(OH)₂ present in 1g:

Number of moles = mass (in grams)/ molar mass

Number of moles = 1g/ 58.33 g/mol

Number of moles = 0.0171 moles

Now, from the reaction above, 1 mole of Mg(OH)₂ reacts with 2 moles of HCl.

So, the number of moles of HCl that can be neutralized by 0.0171 moles of Mg(OH)₂ is:

Number of moles of HCl = (0.0171 moles Mg(OH)₂) x (2 moles HCl/ 1 mole Mg(OH)₂)

Number of moles of HCl = 0.0342 moles

Hence, 1g of Mg(OH)₂ can neutralize 0.0342 moles of HCl or 0.0342 x 36.5 (molar mass of HCl) = 1.25 g HCl.

Thus, the answer is A) 0.0171.

To know more about moles:

brainly.com/question/14676971

#SPJ11

The group of people who controlled the government in Mexico were called the criollos. They had positions of wealth and influence in society.

The criollos were people of Spanish descent who were born in the colonies of the Spanish Empire, including Mexico. They were a privileged class that held positions of wealth and influence in society, including political power.

To find out more about criollos, visit:

https://brainly.com/question/29617443

#SPJ1