The correct statement about the relationship between the two forms of Newton's second law (Fnet = dp/dt and Fnet = m.a) is option D "Fnet = m.a reduces to Fnet = dp/dt if the momentum of the object does not change with time.
What is Newton's second law?Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. In other words, Fnet = m.a, where Fnet is the net force acting on an object, m is its mass, and a is its acceleration. This law can also be written as Fnet = dp/dt, where dp/dt is the rate of change of momentum with time.
Since momentum is the product of mass and velocity, it can be rewritten as dp/dt = m.dv/dt + v.dm/dt, where v is the velocity of the object. If the mass of the object remains constant over time, then v.dm/dt is zero and dp/dt reduces to m.dv/dt, which is equal to Fnet.
Therefore, Fnet = dp/dt reduces to Fnet = m.a if the object's acceleration does not change with time. If the momentum of the object does not change with time, then dp/dt is zero, and Fnet = dp/dt reduces to zero, which means that Fnet = m.a is also zero. Therefore, Fnet = m.a reduces to Fnet = dp/dt if the momentum of the object does not change with time.
To know more about Newton's second law:
https://brainly.com/question/13447525
#SPJ11
Two particles of different masses are projected with the same angle of projection and same initial velocity which is true
The following assertions are accurate when two particles of different masses are projected at the same projection angle and beginning velocity:
Different particle trajectories will be followed by the particles: A projectile's trajectory is determined by its beginning velocity, projection angle, and gravitational acceleration. Due to the various masses of the two particles, their gravitational forces and accelerations will be different, and as a result, so will their trajectories.
Several heights will be attained by the particles: A projectile's maximum height is influenced by its starting velocity and projection angle. The two particles will ascend to different heights since they have different masses but the same beginning velocity.
learn more about same projection angle here:
https://brainly.com/question/13016030
#SPJ4
Five docks are being tested in a laboratory. Exactly at noon, as determined by the WWV
Exactly at noon, as determined by the WWV time signal, on successive days of a week the clocks according to their relative value as good timekeepers, best to worst.
Time signals are also used in many everyday applications, such as GPS navigation, where precise timing is essential for calculating positions accurately. A time signal refers to any signal that provides information about the passage of time. Time signals are often used in experiments to measure the duration of events or to synchronize the timing of multiple processes.
One common type of time signal is a periodic signal, which repeats itself at regular intervals. This can be used to measure the period or frequency of a phenomenon, such as the oscillation of a pendulum or the vibration of a guitar string. Another type of time signal is a pulse signal, which provides a brief burst of energy at a specific time. This can be used to trigger the start or stop of a process or to measure the time delay between different events.
To learn more about Time signal visit here:
brainly.com/question/28875779
#SPJ4
true or false if the whole picture plane is affected by aerial diffusion, it stops being an effective indicator of depth.
If the whole picture plane is affected by aerial diffusion, it stops being an effective indicator of depth - this statement is true.
Aerial diffusion is the scattering of light by particles in the air. These particles cause distant objects to appear fainter and bluer than closer objects, leading to a decrease in visual clarity and the ability to perceive depth. Aerial diffusion can be utilized in painting and drawing to create an atmospheric perspective, which produces a sense of depth by making objects are that further away appear hazier and less distinct than those that are closer. However, if the entire picture plane is affected by aerial diffusion, this can make it difficult to distinguish between objects at different depths, which can result in a lack of clarity and depth perception in the painting or drawing.
A picture plane is a theoretical plane that corresponds to the surface of a painting or drawing. The picture plane is where the artist organizes and arranges the various elements of the composition to create a visual representation of a scene. The picture plane is where the viewer's eye interacts with the artwork, and where the illusion of depth and space is created. In this context, the picture plane is an important factor in the creation of depth and atmosphere in a painting or drawing.
Learn more about aerial diffusion:
https://brainly.com/question/1381101
#SPJ11
A pendulum swings on a massless string back and forth between points 1 and 5. Neglecting forces due to the air, at which point(s) is the total power delivered by the forces acting on the pendulum equal to zero? (Mark all that apply.) NONE of the points 1-5. What is the angle between each force and the velocity at each point? Is the velocity zero or non-zero at each point?
The power delivered by the forces acting on the pendulum is equal to zero at points 2 and 4. The angle between each force and the velocity at each point is 90 degrees. The velocity is zero at points 1 and 5, and non-zero at points 2 and 4.
A pendulum is a mass attached to a string or rod that swings back and forth due to the force of gravity. When the pendulum swings, there are forces acting on it, including the force of gravity, tension in the string or rod, and air resistance. To determine the points at which the total power delivered by the forces acting on the pendulum is equal to zero, we need to consider the work done by each force.To do this, we use the equation for work:work = force x distance x cos(theta)where force is the magnitude of the force, distance is the distance traveled by the pendulum, and theta is the angle between the force and the direction of motion of the pendulum.
When the total work done by all forces acting on the pendulum is zero, the power delivered by those forces is also zero.Since the mass of the pendulum is negligible compared to the force of gravity, we can assume that the tension in the string is always perpendicular to the direction of motion of the pendulum. Therefore, the angle between the force of tension and the velocity of the pendulum is 90 degrees. The angle between the force of gravity and the velocity of the pendulum is also 90 degrees at points 1 and 5, where the pendulum comes to a stop and changes direction.The velocity of the pendulum is zero at points 1 and 5 because it comes to a stop and changes direction.
The velocity is non-zero at points 2 and 4 because the pendulum is moving at its maximum speed in these positions. Therefore, the power delivered by the forces acting on the pendulum is equal to zero at points 2 and 4, where the work done by the force of gravity is equal and opposite to the work done by the force of tension.
More on pendulum: https://brainly.com/question/31113926
#SPJ11
what maximum speed can the car have without flying off the road at the top of the hill? express your answer to two significant figures and include the appropriate units.
The maximum speed of a car at the top of a hill without flying off the road depends on the angle of the slope and the coefficient of friction between the car tires and the road. Generally speaking, if the angle is not too steep, the car can usually travel up to around 50 km/h without risking flying off the road.
To determine the maximum speed that a car can have without flying off the road at the top of the hill, the centripetal force should be equal to the gravitational force on the car. In addition, the frictional force should be equal to the centrifugal force. At the top of the hill, the gravitational force acting on the car is given by F = mg where m is the mass of the car and g is the acceleration due to gravity. The centrifugal force is given by F = mv²/r where m is the mass of the car, v is the velocity of the car, and r is the radius of curvature. The frictional force is given by F = μmg where μ is the coefficient of friction between the tires and the road. Setting the centrifugal force equal to the gravitational force gives mv²/r = mg. Solving for v gives:v = √(gr) Setting the frictional force equal to the centrifugal force gives μmg = mv²/r. Solving for v gives:v = √(μgr)The smaller of these two speeds is the limiting speed that the car can have without flying off the road. Therefore, the maximum speed that the car can have without flying off the road at the top of the hill is given by: v = √(μgr) where μ is the coefficient of friction, g is the acceleration due to gravity, and r is the radius of curvature. The speed should be expressed in units of meters per second.
For more details follow the link: https://brainly.com/question/22610586
#SPJ11
david walks 3 km north, and then turns east and walks 4 km. what is the distance?
David travelled a total of 5 kilometres.
To find the distance that David walked, we can use the Pythagorean theorem, which relates the sides of a right triangle. In this case, the two legs of the right triangle represent the distance that David walked north and east, respectively, and the hypotenuse represents the total distance that he walked.
If David walks 3 km north and then turns east and walks 4 km, we can draw a right triangle with legs of length 3 km and 4 km. Applying the Pythagorean theorem, we have:
distance²2 = (3 km)²+ (4 km)²
distance²2 = 9 km²+ 16 km²
distance = √(25) km
distance = 5 km
Therefore, the total distance that David walked is 5 km.
To learn more about distance refer to:
brainly.com/question/11581397
#SPJ4
Critically discuss why the environment in most communities continue to be dirty amidst the existence of local government structures
Explanation:
# Unmanaged population distribution
# lack of sanitation programs
# lack of awareness programs
# lack of implementation of policies and rules
# carelessness of people and government
# Unmanaged waste disposal
true or false an action potential introduced at the neuromuscular junction is propagated along the sarcoplasmic reticulum.
The given statement an action potential introduced at the neuromuscular junction is propagated along the sarcoplasmic reticulum is false because the action potential is only propagated along the muscle cell membrane and not along the sarcoplasmic reticulum.
An action potential introduced at the neuromuscular junction (NMJ) triggers the release of calcium ions (Ca2+) from the sarcoplasmic reticulum (SR), but the action potential itself is not propagated along the SR. The SR is a specialized organelle found in muscle cells that stores and releases calcium ions, which are necessary for muscle contraction. When an action potential reaches the NMJ, it triggers the release of the neurotransmitter acetylcholine, which binds to receptors on the muscle cell membrane and causes an influx of sodium ions (Na+) and an efflux of potassium ions (K+), generating an action potential that spreads across the muscle cell membrane and into the SR. The release of Ca2+ from the SR then initiates the process of muscle contraction.
To know more about neuromuscular junction, here
brainly.com/question/14454765
#SPJ4
Please order the following as they are arranged in the path of blood through the heart. Begin at the return of blood to the heart from the systemic circulation. Not all locations in the pathway are listed. 2nd in order 4th in order
1st in order
last in order
3rd in order
The path of blood through the heart and its order blood is returned to the heart from the systemic circulation through the Superior and inferior vena cavae, and the next event is that it enters the right atrium.
After that, it passes through the tricuspid valve and into the right ventricle, which is the 3rd in order, following the first and second events. After that, it passes through the pulmonic valve and enters the pulmonary artery, which is the 4th in the order. In the lungs, the blood becomes oxygenated, and then it returns to the heart through the pulmonary veins, which is the 2nd in the order. Finally, the oxygen-rich blood enters the left atrium and passes through the bicuspid (mitral) valve to the left ventricle, which is the 1st in order.
So the order of events in the path of blood through the heart is as follows:1st in order: Oxygen-rich blood enters the left atrium and passes through the bicuspid (mitral) valve to the left ventricle.2nd in order: Oxygen-rich blood returns to the heart through the pulmonary veins.3rd in order: Blood passes through the tricuspid valve and enters the right ventricle.4th in order: Blood passes through the pulmonic valve and enters the pulmonary artery. Not all locations in the pathway are listed.
Learn more about systemic circulation at brainly.com/question/1819058
#SPJ11
The mass of a hoop of radius 1.0 m is 6.0 kg. It rolls across a horizontal surface with a speed of 10.0 m/s. (a) How much work is required to stop the hoop? (b) If the hoop starts up a surface at 30° to the horizontal with a speed of 10.0 m/s, how far along the incline will it travel before stopping and rolling back down?
The work required to stop the hoop is 600 joules and the distance traveled by the hoop on the inclined surface until it comes to the rest is 20.38 m.
(a) To stop the hoop, all of its kinetic energy needs to be converted into other forms of energy, such as heat due to friction. Therefore, the work required to stop the hoop is equal to its initial kinetic energy:
[tex]KE = 1/2 mv^2+1/2(mr^2)v^2/r^2[/tex]
[tex]= 1/2 (6.0\ kg)(10.0 \ m/s)^2+1/2(6.0\times1^2)\times 100/1[/tex]
[tex]= 600 J[/tex]
Therefore, 600 J of work is required to stop the hoop.
(b) The initial kinetic energy of the hoop is the same as in part (a), so it is still 600 J. As the hoop rolls up the incline, some of its kinetic energy will be converted into potential energy, decreasing its speed. The work done by the force of gravity on the hoop as it rolls up the incline is equal to the change in potential energy, which is given by:
PE = mgh =600 J
[tex]h=600/(6\times9.81)\ m[/tex]
[tex]h=10.19 \ m[/tex]
Where h is the vertical height that the hoop rises.
Let the hoop rolls a distance of x m on the inclined surface.
[tex]x= h/sin30[/tex]
[tex]x=10.19\times2=20.38\ m[/tex]
Therefore the distance traveled on the inclined surface is 20.38 m.
Learn more about kinetic energy:
https://brainly.com/question/8101588
#SPJ11
In a photoelectric experiment using a sodium surface, you find a stopping potential of 1.85V for a wavelength of 300nm and a stopping potential of 0.820V for a wavelength of 400nm. From these data find (a) a value for the Planck constant, (b) the work function Φ for sodium, and (c) the cutoff wavelength λ0 for sodium.
The Planck constant is 1.41 x 10-34 Js, the work function Φ for sodium is 2.39 eV, and the cutoff wavelength λ₀ for sodium is 590 nm.
Using the data, we can calculate the Planck constant, work function, and cutoff wavelength for sodium.
To start, we use the formula E = hc/λ, where E is the stopping potential, h is the Planck constant, c is the speed of light, and λ is the wavelength.
To find the Planck constant, we rearrange the equation to get h = Eλ/c.
Plugging in the values from the data, we get
h = (1.85 V)(300 nm)/(3 x 108 m/s)
= 1.41 x 10-34 Js.
Now to find the work function Φ for sodium, we use the equation Φ = hc/λ - E.
Plugging in the values from the data, we get
Φ = (1.41 x 10-34 Js)(3 x 108 m/s)/(400 nm) - 0.82 V = 2.39 eV.
Finally, to find the cutoff wavelength λ₀ for sodium, we use the equation λ₀ = hc/Φ.
Plugging in the values from the data, we get
λ₀ = (1.41 x 10-34 Js)(3 x 108 m/s)/2.39 eV = 590 nm.
Therefore, the Planck constant is 1.41 x 10-34 Js, the work function Φ for sodium is 2.39 eV, and the cutoff wavelength λ₀ for sodium is 590 nm.
Learn more about "Planck constant, work function, wavelength" at : https://brainly.com/question/2289138
#SPJ11
the drawing shows a 15.0-kg ball being whirled in a circular path on the end of a string. the motionoccurs on a frictionless, horizontal table. the angular speed of the ball is 12 rad/s. the string has amass of 0.0230 kg. how much time does it take for a wave on the string to travel from the center ofthe circle to the ball
The time it takes for the wave on the string to travel from the center of the circle to the ball is 5.64 m/12 m/s = 0.47 s.
The wave on the string will take a certain amount of time to travel from the center of the circle to the ball. To calculate this time, we will use the equation:
Time = Distance/Velocity
The distance is equal to the circumference of the circle, which is equal to 2πr. In this case, the radius is (15.0 kg/9.81 m/s2)/12 rad/s = 0.90 m. Therefore, the distance is 2π(0.90 m) = 5.64 m.
The velocity is equal to the speed of the wave along the string, which is equal to the angular speed of the ball, which is 12 rad/s. Therefore, the velocity is 12 m/s.
Therefore, the time it takes for the wave on the string to travel from the center of the circle to the ball is 5.64 m/12 m/s = 0.47 s.
Learn more about speed of the wave: brainly.com/question/3148541
#SPJ11
C. Demonstrate the effect of simple machines on work.
Simple machines make work.
but not
Explain which simple machine(s) you can use in each situation and how
it will help make work easier:
1. Putting a motorcycle into the back of a trailer.
2. Lifting a flag to the top of the flagpole.
3. Moving dirt from the front yard to the backyard.
4. Attaching two boards together.
5. Splitting a log in half.
6. Cutting paper.
7. Lifting a car to change the tire.
8. Moving from the bottom floor of the house to the top floor.
9. Opening a can of peaches.
10. Cutting a piece of cheese.
Putting a motorcycle into the back of a trailer: A ramp is a simple machine that can be used to make this task easier. By placing a ramp at the back of the trailer, the motorcycle can be rolled up the ramp instead of being lifted manually.
The Explanation of the simple machines to be usedLifting a flag to the top of the flagpole: A pulley is a simple machine that can be used to make this task easier. By attaching a pulley to the top of the flagpole and another pulley at ground level, a rope can be run through the pulleys, allowing the flag to be lifted with less force.
Moving dirt from the front yard to the backyard: A wheelbarrow is a simple machine that can be used to make this task easier. By loading dirt into the wheelbarrow and pushing it, the person doing the work can move more dirt with less effort.
Attaching two boards together: A screw is a simple machine that can be used to make this task easier. By using a screwdriver to turn a screw into one board and then into the other, the boards can be securely attached with less effort.
Splitting a log in half: A wedge is a simple machine that can be used to make this task easier. By positioning a wedge at the center of the log and hitting it with a mallet or hammer, the log can be split into two pieces with less force.
Cutting paper: Scissors are a simple machine that can be used to make this task easier. By using the scissors' blades to apply force to the paper, the person cutting can apply less force than if they were tearing the paper by hand.
Lifting a car to change the tire: A jack is a simple machine that can be used to make this task easier. By placing the jack under the car and using a handle to lift the car off the ground, the person changing the tire can exert less force than if they were trying to lift the car manually.
Moving from the bottom floor of the house to the top floor: Stairs are a simple machine that can be used to make this task easier. By using the inclined plane formed by the stairs, the person climbing the stairs can expend less effort than if they were climbing a straight ladder.
Opening a can of peaches: A can opener is a simple machine that can be used to make this task easier. By using the can opener's sharp blade to cut through the can lid, the person opening the can can apply less force than if they were trying to pry the lid off by hand.
Cutting a piece of cheese: A knife is a simple machine that can be used to make this task easier. By using the knife's sharp edge to cut through the cheese, the person cutting can apply less force than if they were trying to tear the cheese by hand.
Read more about simple machines here:
https://brainly.com/question/28750066
#SPJ1
A simple machine is an expression used to basically describe a tool that helps make work easier.
What are examples of simple machines?A simple machine is a mechanical device that changes the direction or magnitude of a force such that things can be lifted with less effort.
For example, a lever system like a crane could be used to put a motorcycle into the back of a trailer; or to lift a flag to the top of the flagpole. While, an inclined plane, such as a ramp, can be used to move dirt from the front yard to the backyard. And a screw can be used to attach two boards together.
A wedge, on the other hand, can be used to split a log in half. A pair of scissors, which is a type of lever, can be used for cutting paper. Meanwhile, a hydraulic jack could be used for lifting a car to change the tire.
A can opener, which is also a type of wedge can be used for opening a can of peaches. And then, lastly, a knife, which is a type of wedge, is ideal for cutting a piece of cheese.
You can learn more about simple machines here https://brainly.com/question/14696504
#SPJ1
X-ray pulses from Cygnus X-1, a celestial x-ray source, have been recorded during high-altitude rocket flights. The signals can be interpreted as originating when a blob of ionized matter orbits a black hole with a period of 7.84 ms. If the blob were in a circular orbit about a black hole whose mass is 13.5 times the mass of the Sun, what is the orbit radius? The value of the gravitational constant is 6.67259×10−11N⋅m2/kg2 and the mass of the Sun is 1.991×1030 kg. Answer in units of km.
The orbit radius is 6.225 × 10^5 km.
The x-ray pulses from Cygnus X-1, a celestial x-ray source, have been recorded during high-altitude rocket flights. The signals can be interpreted as originating when a blob of ionized matter orbits a black hole with a period of 7.84 ms. And also, it is given that the blob were in a circular orbit about a black hole whose mass is 13.5 times the mass of the Sun. We need to determine the orbit radius.
The formula to be used to find the orbit radius is given by:
G(M+m)T2/4π2= r3
Where,
G = Gravitational constant = 6.67259×10−11 N⋅m2/kg2
M = Mass of the black hole
m = Mass of the blob
T = Time period of the orbit = 7.84 ms = 7.84 × 10^-3 s
r = Orbit radius
Substitute the given values in the above formula, we get:
r3 = G(M+m)T2/4π2
r3 = 6.67259×10−11 * [13.5(1.991×10^30) + m] * (7.84×10−3)2 / 4π2
r3 = 5.7919 × 10^15 m^3
Taking cube root on both sides, we get:
r = [5.7919 × 10^15 m^3] 1/3
r = 6.225 × 10^8 m
1 km = 1000 m
Therefore, the orbit radius in km is:
r = 6.225 × 10^8 m * 1 km / 1000 m
r = 6.225 × 10^5 km
Hence, the orbit radius is 6.225 × 10^5 km.
To know more about Cygnus X-1, refer here:
https://brainly.com/question/15705839#
#SPJ11
Which lists the layers in a PNP transistor from the least negative to the most negative?
emitter, base, collector
base, emitter, collector
collector, base, emitter
collector, emitter, base
Answer:
P-type layer (base)
N-type layer (emitter)
P-type layer (collector)
Explanation:
A 75.0 g object needs 995 Joules to increase its temperature by 8.0 oC. Its specific heat capacity is _______.
A. 0.229 J/goC
B. 22.9 J/goC
C. 0.229 × 102 J/goC
D. 2.29 × 102 J/goC
E. None of the Above
Therefore, the specific heat capacity of the object is 0.229 J/goC. Therefore, option A is the correct answer.The specific heat capacity of a 75.0 g object that requires 995 Joules to increase its temperature by 8.0 oC is 0.229 J/goC.
Explanation:In the question, we are asked to calculate the specific heat capacity of a 75.0 g object that requires 995 Joules of energy to increase its temperature by 8.0 oC.The formula used to calculate the specific heat capacity is given by:Q = m × c × ∆Twhere,Q is the amount of heat transferred,m is the mass of the object,c is the specific heat capacity of the object, and∆T is the temperature change .In the above formula, we can calculate the specific heat capacity (c) using the following formula:c = Q/(m × ∆T)Plugging in the given values,Q = 995 Jm = 75.0 g = 0.075 kg∆T = 8.0 oCSubstituting these values into the formula, we get:c = 995 J/(0.075 kg × 8.0 oC)c = 995 J/(0.6 kg.oC)c = 1658.33 J/kg.oC (Round off the value to three significant figures)Therefore, the specific heat capacity of the object is 0.229 J/goC. Therefore, option A is the correct answer.
For more such questions on specific heat capacity
https://brainly.com/question/27641723
#SPJ11
a density bottle has a mass of 0.04kg when empty a mass of 0.20kg when some quality of steel ball bearing is added to it and a mass of 0.24kg when the remainder of the bottle is filled with water. if the density bottle weight 0.1kg when filled with water. calculate the relative density of the steel ball bearing.
Answer:
Bottle = .04
Bottle + Bearing = .20
Bottle + Bearing + Water = .24
Bottle + Water = .1
Full bottle of water weighs = .06
Weight of bearing = .16
What volume of water does the bearing replace????
It takes .14 of bottle to replace bearing leaving .06 of water
Density = 16 / 6 = 2.67
Check: probably should use volumes
A charge, q1 = +4. 00 MC, is at the origin, and a second charge, 92 =
-6. 00 MC, is on the x-axis 0. 300 m from the origin. Find the electric field at a point "+P" on the y-axis 0. 800 m from the origin. What is the net force on "p" (magnitude and direction)
The electric field at a point "+P" on the y-axis 0. 800 m from the origin is 53.3 N/C. The net force on "p" (magnitude and direction) is 5.33 x 10^-5 N.
To find the electric field at point "p" on the y-axis, we can use Coulomb's law and the principle of superposition.
First, let's find the electric field contribution at point "p" due to the charge q1 at the origin. We can use Coulomb's law for point charges to find the electric field contribution:
E = k * q / r²
where k is Coulomb's constant, q is the charge, and r is the distance from q to point "p". In this case, r is simply the distance from the origin to point "p", which is 0.8 m. Plugging in the values:
E1 = (9.0 x 10⁹ N*m²/C²) * (+4.00 x 10-⁶ C) / (0.8 m)²
E1 = 18.0 N/C (upwards on the y-axis)
Similarly, the electric field contribution at point "p" due to the charge q2 on the x-axis and at a distance r2 can be calculated Using the Pythagorean theorem, we can find this distance:
r2 = √[(0.3 m)² + (0.8 m)²] = 0.854 m
Plugging in the values:
E2 = (9.0 x 10⁹ N*m²/C²) * (-6.00 x 10-⁶ C) / (0.854 m)²
E2 = 50.6 N/C (at an angle of arctan(0.8/0.3) = 69.4 degrees below the negative x-axis)
To find the total electric field at point "p", we add the contributions from q1 and q2 using vector addition:
Etotal = E1 + E2
Using the component method, we can find the magnitude and direction of the total electric field:
|Etotal| = √[(E_total,x)² + (E_total,y)²]
= √[(-18.0 N/C)² + (50.6 N/C)²]
= 53.3 N/C
θ = arctan[(E_total,y) / (E_total,x)]
= arctan[(50.6 N/C) / (-18.0 N/C)]
= -69.2 degrees
Therefore, the magnitude of the net force on a +1.00 C test charge placed at point "p" is,
Fnet = qtest * |E_total| = (+1.00 x 10^-6 C) * (53.3 N/C) = 5.33 x 10^-5 N
Learn more about electric fields on
https://brainly.com/question/15800304?referrer=searchResults
#SPJ4
How much force is required to accelerate a 5kg mass at 20m/s 2 ?
Нам не дано коэффициент трения, значит, можно не учесть силу трения. От этого, по второму закону Ньютона, F=ma=5×20=100 Н.
И это всё!
Studying a spectrum from a star can tell us a lot. All of the following statements are true except one. Which statement is not true?The total amount of light in the spectrum tells us the star's radius.We can identify chemical elements present in the star by recognizing patterns of spectral lines that correspond to particular chemicals.Shifts in the wavelengths of spectral lines compared to the wavelengths of those same lines measured in a laboratory on Earth can tell us the star's speed toward or away from us.The peak of the star's thermal emission tells us its temperature: hotter stars peak at shorter (bluer) wavelength
All of the following statements are true about studying spectrum from a star except the statement that "The total amount of light in the spectrum tells us the star's radius."
It is possible to identify chemical elements present in the star by recognizing patterns of spectral lines that correspond to particular chemicals. In other words, we can determine which elements are present in a star by analyzing the spectrum of the light it emits. This is because every chemical element has a unique spectrum of energy that it emits.
The wavelength shifts of spectral lines compared to the wavelengths of those same lines measured in a laboratory on Earth can tell us the star's speed toward or away from us. This is known as the Doppler effect, and it enables astronomers to calculate how fast a star is moving relative to Earth. For example, if the spectral lines are shifted towards the blue end of the spectrum, it means that the star is moving towards us.
On the other hand, if the spectral lines are shifted towards the red end of the spectrum, it means that the star is moving away from us.The peak of the star's thermal emission tells us its temperature: hotter stars peak at shorter (bluer) wavelengths. This is because the hotter an object is, the more energy it radiates, and the shorter the wavelength of that radiation. Therefore, the peak of the thermal emission spectrum provides an indication of the star's temperature.
More on spectrum: https://brainly.com/question/14965583
#SPJ11
When a company is readily able to switch to another company in order to get the raw materials it needs to make products, Porter would say that the bargaining power of ______ goes down.
competitors
buyers
investors
suppliers
Porter would say that the bargaining power of suppliers goes down when a company is readily able to switch to another company in order to get the raw materials it needs to make products.
What is the bargaining power of suppliers?It is referred to as the ability of suppliers to control the cost, quality, and availability of raw materials or components required by businesses to manufacture their products.
It is determined by a number of factors, including
Switching costs: When switching to another supplier is expensive or difficult, suppliers' bargaining power is increased.
Cost of inputs: When the cost of raw materials is high, suppliers' bargaining power is increased and vice versa.
The number of suppliers: When there are a limited number of suppliers, each supplier has more bargaining power. Suppliers' strength: When suppliers are large and well-established, they have more bargaining power.
Product differentiation: When suppliers offer unique and high-quality inputs, their bargaining power is increased.
Thus, Porter would say that the bargaining power of suppliers goes down when a company is readily able to switch to another company in order to get the raw materials it needs to make products.
Learn more about bargaining power here:
brainly.com/question/29511419
#SPJ11
a skater is rotating in place on an ice rink, holding their arms straight out. while still spinning, they pull their arms in to their chest. what effect does this have on their angular momentum?
When the skater pulls their arms in to their chest, their moment of inertia decreases, but their angular velocity remains constant.
What is the angular momentum?A skater is rotating in place on an ice rink, holding their arms straight out. while still spinning, they pull their arms in to their chest the effect does this have on their angular momentum is that the pulling the arms in to the chest will decrease the skater's angular momentum. arms are pulled in to the chest, the skater's rotational inertia decreases, which results in a decrease in their angular momentum.
Angular momentum is a measure of the amount of rotational motion an object has about an axis. The axis can be any point, but it is usually the center of mass of the object. In physics, angular momentum is denoted by the letter L.
As a result, their angular momentum decreases.
Read more about momentum here:
https://brainly.com/question/1042017
#SPJ11
what device is used through ureteroscope to capture an inact calculus or fragments if fractured by laser
The device used through a ureteroscope to capture an intact calculus or fragments if fractured by laser is called a basket retrieval device.
A ureteroscope is a specialized tool that is used to examine and treat the inside of the ureter and kidney. It is made up of a long, thin tube with a camera and a light source at the end, which is inserted into the patient's urinary tract through the urethra. The physician will be able to examine the lining of the bladder, ureters, and kidneys during this examination.
A basket retrieval device is a specialized tool that is used during ureteroscopy, which is a minimally invasive surgical technique used to examine the inside of the urinary tract. It is used to remove kidney stones or any fragments that have been broken down by laser lithotripsy.The basket retrieval device works by capturing the stones or fragments with its metal "basket" and then removing them from the body. The physician will then be able to extract the stones or fragments by retracting the basket into the ureteroscope's working channel. The stones will be disposed of or sent to a lab for further testing.
More on ureteroscope: https://brainly.com/question/28170411
#SPJ11
Biomass is created through the conversion of ____ energy into ____ energy, which can then be used to generate electricity. In contrast, tidal energy involves the conversion of ____ energy into electricity.a) chemical; potential; potential
b) solar; kinetic; potential
c) chemical; kinetic; kinetic
d) solar; chemical; kinetic
Biomass is created through the conversion of chemical energy into kinetic energy, which can then be used to generate electricity. In contrast, tidal energy involves the conversion of kinetic energy into electricity.
Thus, the correct option is C.
What is Biomass Energy?Biomаss energy is the energy creаted from the decomposition of orgаnic mаtter, such аs wood, crops, аnd аnimаl wаste. It is а renewаble source of energy, аnd unlike fossil fuels, it is sustаinаble in nаture.
Biomаss energy cаn be generаted through the conversion of chemicаl energy into kinetic energy, which cаn be hаrnessed to creаte electricity. Biomаss energy cаn аlso be used to produce heаt аnd fuel, mаking it а versаtile аnd environmentаlly friendly energy source.
For more information about biomаss energy refers to the link: https://brainly.com/question/21478906
#SPJ11
Based on the data in the two-way frequency table, what is the probability that a randomly selected player won a bronze medal given that the player represented Spain? A. 13.9% B. 24.4% C. 22.4% D. 5.5% Examine the two-way frequency table below_ Gold Medals Silver Medals Bronze Medals USA 20 18 42 Spain 25 France 19 13 11 27 26'
Answer: 22.4%
Explanation: A = 49/201 0.24378109 B= 11/49 0.2244898 AxB/A I took the quiz, this is correct
The probability that a randomly selected player won a bronze medal given that the player represented Spain is b)24.4%.
To calculate this probability, we need to use conditional probability formula: P(Bronze Medal | Spain) = P(Spain and Bronze Medal) / P(Spain), where P(Spain and Bronze Medal) represents the number of players from Spain who won a bronze medal, and P(Spain) represents the total number of players who represented Spain.
From the given two-way frequency table, we can see that there were a total of 25 players who represented Spain, and 11 of them won a bronze medal. So, P(Spain and Bronze Medal) = 11/100.
Similarly, the total number of players who represented Spain is 25 + 19 + 13 = 57. So, P(Spain) = 57/100.
Now, we can substitute these values into the conditional probability formula to get: P(Bronze Medal | Spain) = (11/100) / (57/100) = 0.244 or 24.4%.
Therefore, the answer is B. 24.4%.
For more similar questions on probability theory.
brainly.com/question/13604758
#SPJ11
once you have pulled hard enough to start the box moving upward, what is the magnitude f of the upward force you must apply to the rope to start raising the box with constant velocity? express the magnitude of the force in terms of m and g .
When we pull the rope hard enough to start the box moving upward, the magnitude f of the upward force you must apply to the rope to start raising the box with constant velocity is given by the equation:
f = mgInitially, the box was at rest, meaning it had no velocity. This means that the acceleration experienced by the box is constant, and hence the velocity is constant when it moves upwards.
Therefore, the force required to raise the box with a constant velocity is equal to the force of gravity acting downwards on the box (its weight).This force of gravity is given by the formula:
Weight = m x g
Where:
m is the mass of the box.g is the acceleration due to gravity, which is constant at approximately 9.81 m/s2.Hence the upward force f required to raise the box with constant velocity is:
f = Weightf = m x gLearn more about velocity: https://brainly.com/question/25749514
#SPJ11
A block of massmis placed in a smooth-bored spring gun at the bottom of the inclineso that it compresses the spring by an amountx_c. The spring has spring constantk. The incline makes an anglethetawith the horizontal and the coefficient of kineticfriction between the block and the incline ismu. The block is released, exits the muzzle of the gun, andslides up an incline a total distancethe distance traveled along the incline by the block after it exitsthe gun. Ignore friction when the block is inside the gun. Also,assume that the uncompressed spring is just at the top of the gun(i.e., the block moves a distancex_cwhile inside of the gun). Usegfor the magnitude of acceleration due to gravity.
The block moves up the incline with a constant velocity, v² = 2gx.sin θ - 2μgd. The block will move up the incline as long as the numerator in the above equation is positive.
A block of mass m is placed in a smooth-bored spring gun at the bottom of the incline so that it compresses the spring by an amount x_c. The spring has spring constant k. The incline makes an angle theta with the horizontal and the coefficient of kinetic friction between the block and the incline is mu.
The block is released, exits the muzzle of the gun, and slides up an incline a total distance the distance traveled along the incline by the block after it exits the gun. Ignore friction when the block is inside the gun.
Also, assume that the uncompressed spring is just at the top of the gun (i.e., the block moves a distance x_c while inside of the gun). Use g for the magnitude of acceleration due to gravity. Determine the distance traveled along the incline by the block after it exits the gun.Given, Mass of the block = m Initial compression of the spring = xc, spring constant = k, Angle between incline and horizontal = θ, Coefficient of kinetic friction = μ, Distance traveled along the incline by the block = d.
Let us begin with the given problem,
the work done on the spring is
K = 1/2 k x_c²
As the spring is compressed, the potential energy of the spring increase. Thus, the work done on the block by the spring is -K.
This work is equal to the increase in kinetic energy of the block.
This kinetic energy is converted into potential energy as the block moves up the incline. Thus, work done by the block against the gravitational force is mgh where, h is the height the block reaches above its initial position. The work done against the friction is mgh.f where, f is the coefficient of friction between the block and the incline.
Then, K + mgh.f = 1/2mv²
where v is the velocity of the block after it exits the gun.
Determine the final velocity of the block,
v²= 2(k/m) x_c² - 2gh(f + sin θ).
The block moves up the incline with a constant velocity,
v² = 2gx.sin θ - 2μgd.
The above equation is obtained using the work-energy principle.
Then,
2gx.sin θ - 2μgd = 2(k/m) x_c² - 2gh(f + sin θ)
Here, solving for d, we get,
d = (1/2g) [x_c² (k/m) - μx_c² sin θ] / (μ + sin θ).
The distance traveled along the incline by the block after it exits the gun is
(1/2g) [x_c² (k/m) - μx_c² sin θ] / (μ + sin θ).
Thus, this is the required solution. The block will move up the incline as long as the numerator in the above equation is positive.
Learn more about friction on:
https://brainly.com/question/15122221
#SPJ1
suppose the roller coaster had had an initial speed of 5 m/s uphill instead, and it coasted uphill, stopped, and then rolled back down to a final point 20 m below the start. we would find in that case that its final speed is the same as its initial. explain in terms of conservation of energy.
In this case, the roller coaster starts with kinetic energy because it has an initial speed of 5 m/s.
Since the roller coaster's total energy is conserved throughout the ride, its final speed when it reaches the bottom will be the same as its initial speed of 5 m/s.
As it goes uphill, the kinetic energy is gradually converted into potential energy, so its speed decreases until it reaches the top, where it has only potential energy. When it stops, all the kinetic energy has been converted to potential energy. As the roller coaster rolls back down, the potential energy is converted back to kinetic energy, and its speed increases until it reaches the bottom, where all the potential energy has been converted back to kinetic energy.
This is because the roller coaster's potential energy at the top is equal to the sum of its initial kinetic energy and the work done by gravity as it went uphill. The roller coaster then converts all of its potential energy back into kinetic energy as it rolls back down the hill.
For more similar questions on conservation of energy and physics:
brainly.com/question/381281
#SPJ11
Learning Goal: To be able to calculate the tension in a string and the acceleration of each of two blocks in a two-pulley system. As shown, a block with mass mi is attached to a massless ideal string. The string wraps around a massless pulley and then wraps around a second massless pulley that is attached to a block with mass m2 and ultimately attaches to a wall. The whole system is frictionless.Part A - Tension in the string Given that a2 is the magnitude of the horizontal acceleration of the block with mass m2, what is T, the tension in the string? Express the tension in terms of m2 and a2. Part B - Acceleration of suspended block Given T, the tension in the string, calculate a1, the magnitude of the vertical acceleration of the block with mass mi. Express the acceleration's magnitude, a1, in terms of mi, g, and T. a1a_1 = ____ ?
The tension in the string is T = m2*a2.
The magnitude of the vertical acceleration of the block with mass m1, a1, is a1 = (T - m1*g)/m1.
In order to calculate the tension in the string, T, and the acceleration of the block with mass m1, a1, we must use Newton's second law of motion.
Part A - Tension in the string:
Since, the acceleration of the block with mass m2 is known, we can use the equation,
T = m2*a2 to calculate the tension in the string, T.
Tension= m2*a2
Part B - Acceleration of suspended block:
We can use the equation,
T = m1*a1 + m1*g to calculate the magnitude of the vertical acceleration of the block with mass m1, a1.
Rearranging this equation to solve for a1 gives us
a1 = (T - m1*g)/m1.
vertical acceleration= (T-m1*g)/m1
"vertical acceleration", https://brainly.com/question/31145319
#SPJ11
Need help on my homework! Thanks.
Answer: Noble Gases (Blue)