Answer:
B.
Explanation:
Most substances found in nature, wood, soil and rocks, are mixtures of chemical compounds.
Which of the following is an example of mutualism?
A. Mistletoe lives on trees. It sends special root-like structures into the tree's bark and absorbs food and water. The tree suffers when it cannot produce enough food for itself and the mistletoe.
B. As the sloth moves from shade to light, the algae get the sun they need to produce their food. The green algae color camouflages the tree sloth from predators. They both benefit.
C. A tick obtains food from the blood of its host.
D. Cape buffalos move through the grass and kick up lots of insects. Cattle egrets eat the insects the buffaloes stir up. The egrets benefit and the buffalo is not harmed, nor does it benefit.
SCIENCE! 18 POINTS
Answer:
B
Explanation:
They both benefit
What happens to air pressure when you go up to the mountains?
Stratus clouds, like the ones shown in the picture, look like large gray blankets hanging low across the sky. When these are present, it will usually ____ if it is warm, and ____ if it is cold.
1. rain, snow
2. snow, drizzle
3. drizzle, be windy
4. be windy, be sunny
1.Practicing regularly & focusing on specific skills you want to improve is regularity & specificity.
True
False
2. Gradually adding to the number of exercises you preform to prevent injury is the principal of regularity & specificity
True
False
WILL GIVE U BRAINLIEST
Why does air rush out of an inflated balloon? ONLY REAL ANSWERS = BRAINLIEST ABSURD, WRONG ANSWER = REPORT
Answer:
When a balloon is inflated we increase the pressure inside the balloon so that the pressure inside the balloon is greater than the pressure outside the balloon. The escaping air in one direction provides the force in the opposite direction for the balloon to go in the opposite direction.
Explanation:
I hope this helps.
what could this answer be I am a main group or representative element. I am located in the third period. I am a metalloid. who am I
Answer: Silicon (Si)
Explanation: the other response is wrong.
Radio waves have long wavelengths.
What does this tell you about their frequency?
A they have high frequencies.
B. they have low frequencies
C. frequency is unrelated to wavelength.
identify the independent and dependent variables.
1. Question: Which brand of pencil (Staples, Stafford, Badger) will sharpen the fastest?
Independent variable:
Dependent variable:
2. Question: Does the amount of air in a basketball affect how high it will bounce?
Independent variable:
Dependent variable:
3. Question: Does the flavor of Gatorade affect how fast someone can run?
Independent variable:
Dependent variable:
Answer:
a.1- independent variable is the sharpener, dependent variable is the pencil brand
a.2- independent variable is the basket ball and dependent variable is amount of air
a.3- independent variable is the person running and dependent is the Gatorade flavor
Explanation:
An independent variable is exactly what it sounds like. It is a variable that stands alone and isn't changed by the other variables you are trying to measure. A dependent variable is exactly what it sounds like. It is something that depends on other factors
What is a model? (Science)
Answer:
a system or thing used as an example to follow or imitate.
Explanation:
Could somebody help me with this question?
Answer:
50 :)
Explanation:
please help me with these
Answer: 14) A. 15)D. 16)B. 17)B. 18)A.
Explanation: Hope this helps, :)
Which of the following types of stars is the hottest? (2 points)
Group of answer choices
Blue main sequence
Orange main sequence
Red supergiant
White dwarf
The type of stars that is the hottest is Blue main sequence.
What is Blue main sequence?
An O-type principal grouping star (O V) is a fundamental succession (center hydrogen-consuming) star of unearthly sort O and glow class V. These stars have somewhere in the range of 15 and multiple times the mass of the Sun and surface temperatures somewhere in the range of 30,000 and 50,000 K.
Their temperature range is so high. So, the hottest star is blue main sequence.
Learn more about Blue main sequence
https://brainly.com/question/2797388
#SPJ2
A box moved 33 meters down a factory conveyor belt at a constant velocity. It moved that distance in
1.5 minutes. What was the box's velocity?
[tex]d = v \times t[/tex]
where d is the distance traveled.where v is the speed.& t is the time taken.[tex]v= \frac{d}{t} = \frac{33}{1.5 \times 60} = \frac{33}{90} = 0.3666 \: meters \: per \: sec[/tex]
Don't forget to change from minutes to seconds by multiplying by 60.What is a model mean?
Answer:
a three-dimensional representation of a person or thing or of a proposed structure, typically on a smaller scale than the original.
Explanation:
definition 1. a three-dimensional representation of a person or thing or of a proposed structure, typically on a smaller scale than the original.
definition 2. a system or thing used as an example to follow or imitate.
Verbs:
1. fashion or shape (a three-dimensional figure or object) in a malleable material such as clay or wax.
2. use (a system, procedure, etc.) as an example to follow or imitate.
Newton's demonstration of objects preferring to travel in straight lines is part of his:
1st Law
3rd Law
2nd Law
Universal Gravitation
Answer:
1st Law.
Explanation:
Newton's First Law states that an object will remain at rest or in uniform motion in a straight line unless acted upon by an external force.
Hope this helps! Brainliest? :)
A team of engineers is working with a wind turbine. The team is working with a model and testing different angles for the blade of the wind turbine. What would the research question be for this team?
Which angle converts the largest percentage of potential energy from the wind into kinetic energy of the turbine?
Which angle converts the largest percentage of kinetic energy from the wind into kinetic energy of the turbine?
Which angle converts the largest percentage of potential energy from the wind into potential energy of the turbine?
Which angle converts the largest percentage of kinetic energy from the wind into potential energy of the turbine?
Answer:it would be which angle converts the most potential energy to into kinetic energy of the turbine
Explanation:
The best research question would be finding the angle that converts the largest percentage of kinetic energy from the wind into kinetic energy of the turbine.
What is Mechanical energy?Mechanical energy is the sum of kinetic and potential energy of the body. Mathematically -
E[M] = E[K] + E[P] = 1/2mv² + mgh = m(1/2v² + gh)
Given is a team of engineers is working with a wind turbine. The team is working with a model and testing different angles for the blade of the wind turbine.
Flowing wind carries very small particles and other light components it finds in its way. The sum of the kinetic energies of these individual particles and components are responsible for the kinetic energy of the flowing wind. Now, this wind is utilized to rotate the turbine blades and generate electricity. In this process, the kinetic energy of the wind does work on the blades of the turbine such that the amount of work done causes the blades to rotate. Now, the rotating blades will have rotational kinetic energy. For a mathematical model -
E[wind] = E[blades]
1/2mv² = 1/2Iω²mv² = Iω²
mv² - Iω² = 0
Hence, the total energy remains conserved.
Therefore, the best research question would be finding the angle that converts the largest percentage of kinetic energy from the wind into kinetic energy of the turbine.
To solve more questions on Mechanical Energy, visit the link below-https://brainly.com/question/20719292
#SPJ5
Which of the following is a similarity between electromagnetic waves and mechanical waves? Both types of waves–
Answer:
A. transfer energy from one point to the other
Explanation:
When waves transfer energy, the matter doesn't move with it, so the energy goes from one point to the other. You can see this more clearly on a transverse wave example.
What is an example of two simple machines put together?
Answer: scissors and a axle.
Explanation:
Which photoreceptive cells are used to see colors?
WILL GIVE BRAINLIEST! PLEASE HELP!
Answer:
Cones
Explanation:
Mark as BRAINLIEST please
Answer:
Cones are less sensitive to light than the rod cells in the retina (which support vision at low light levels), but allow the perception of color.
Explanation:
hope this helps
The turbines can be seen inside this hydroelectric dam. Why are they located at that particular height?
(1 point)
There is a small drop, so the water will still have a lot of kinetic energy to transfer to the turbine.
There is a large drop, so the water will have a lot of kinetic energy to transfer to the turbine.
There is a large drop, so the water will have a lot of potential energy to transfer to the turbine.
There is a small drop, so the water will still have a lot of potential energy to transfer to the turbine.
Answer: The answer is number is two
Explanation: Because as it says there is a large drop, so the water will still have a lot of kinetic energy to transfer to the turbine.
In the hydroelectric dam, there is a large drop, so the water will have a lot of potential energy to transfer to the turbine. Therefore, option (C) is correct.
How is the energy transformed in the hydroelectric dam?In the hydroelectric dam, electric energy is generated using water from a turbine. The flowing water is utilized to propel the turbines. At first, a huge amount of the flowing water has stored across the dams. The kinetic energy of flowing water is stored in the form potential energy in the dams.
Then the stored water in the dam will fall on the turbines so that the turbines are placed in the deep and rotate the turbines and the potential energy of water to the turbines which converted into mechanical energy.
Then the turbines rotate and generate electricity and the mechanical energy is transformed into electrical energy.
Therefore, turbines in the hydroelecric dams are located at particuler height.
Learn more about the hydroelectric power plant, here:
brainly.com/question/2635539
#SPJ2
Help please, I don't understand this at all. I'm in the sixth grade. Please provide an answer that'll look like a sixth grader provided.
+ Extra points
+ Brainliest
Answer:
Without air, you don't fly. Air moves..up, down, and sideways. What air is doing affects what your plane is, or will do. It can help you are kill you. Learn.
Explanation:
just some more Questions for y'all and yes there are more coming and no i dont feel like giving much points out cuz I'm loosing a lot but have fun answering みんな安全に
Answer:
9) C.6 10) B. sun moon earth 11) A. sun moon earth 12) C.one month 13) D
Explanation: plz tell me if there wrong i will fix them hop tis helps
what to do when you have a lot to do but little time?
Answer:
Focusing on one specific task
Explanation:
So just focus on one important task. Clear everything else away, and focus on that. By picking your tasks carefully, you're taking care with the container of your time. You can pick important tasks or joyful ones, but you're being conscious about the choices.
I recommend calming down, sitting in a quiet and comfortable space and listening to study music while studying each different subject, one at a time.
Study Music Recommendations:
- Lofi Hip Hop Radio
- MONOMAN
- Fall In Chill
- Ambition
What Subjects To do First Recommendations:
I recommend doing the subjects that are the most easiest for you, once you get the easy ones out of the way, you can spend the rest of your time trying to really learn the hard subjects without having to worry about the other ones!
Fun Fact:
Studying is not just important for educational development, but also builds personal skills. Having good study skills can improve your confidence, competence, and self-esteem. As well as helps reduce stress and anxiety around deadlines and exams.
I hope this helped! If you dont understand something or would like more of an explanation, feel free to contact me! :D
please help!!!!!!!!!!!!!!!!!
Answer:
1000=100
x=1
cross multiply
100x =1000
divide both sides by hundred
therefore x=10
so it is 10 meters per minute
Which statement correctly identifies the relative levels of kinetic and potential energy in a hydroelectric dam?
Kinetic and potential energy are both highest at the bottom.
Kinetic and potential energy are both highest at the top.
Kinetic energy is highest at the top; potential energy is highest at the bottom.
Kinetic energy is highest at the bottom; potential energy is highest at the top.
Answer:
the answer is the third question
Explanation:
because while the water is behind the dam it has potential energy and while it goes down it stores up kinetic energy then generators convert all the energy into electricity and that is one source that makes power
Kinetic energy is highest at the bottom; potential energy is highest at the top, therefore the correct answer is option D.
What is mechanical energy?
As total mechanical energy is the sum of all the kinetic as well as potential energy stored in the system.
ME = KE + PE
As given in the problem we have to find out which statement correctly identifies the relative levels of kinetic and potential energy in a hydroelectric dam,
The total mechanical energy of the water in a hydroelectric dam is the sum of the kinetic energy and the potential energy which interconvert into each other.
Thus, Kinetic energy is highest at the bottom; potential energy is highest at the top, therefore the correct answer is option D.
To learn more about mechanical energy from here, refer to the link;
brainly.com/question/12319302
#SPJ2
who was your favorite descendants cast member
Answer:
dove cameron of course
Explanation:
The creation of carbon monoxide is an effect. What is one cause?
Answer:
THE PROBLEM
Carbon monoxide (CO)—a colorless, odorless, tasteless, and toxic air pollutant—is produced in the incomplete combustion of carbon-containing fuels, such as gasoline, natural gas, oil, coal, and wood. The largest anthropogenic source of CO in the United States is vehicle emissions.
Explanation:
The incomplete burning of the natural gases petrol or diesel is one of the causes of the creation of carbon monoxide.
What is pollution?It can be defined as the origination of the contaminant substance that poisonous or harmful to our natural environment.
In our environment, pollution can take many different forms depending on the quantity and nature of the contaminant. For instance, the eutrophication process can result in water pollution.
Air pollution persists due to the contaminants present in atmospheric air such as smog.
Land pollution exists because of contaminated soil in the lithosphere.
There are several other types of pollution as well such are sound pollution, radioactive pollution, plastic pollution, oil spill pollution, etc.
When hydrocarbon fuels (such as natural gas, gasoline, and diesel) are burned, carbon monoxide is also produced as a pollutant. The effectiveness of combustion determines the relative amount of CO produced. During their MOT test, older vehicles are inspected yearly for CO emissions. It's interesting to note that only one of the two carbon oxides inhibits combustion; for this reason, carbon dioxide is used in fire extinguishers.
One of the factors contributing to the production of carbon monoxide is the incomplete burning of natural gases such as gasoline or diesel.
Learn more about pollution from here
brainly.com/question/23857736
#SPJ6
Which statement describes a concave lens?
It bends light and then gathers light.
It is thicker in the middle than at the ends.
It makes a larger image of the object.
It makes a smaller image of the object.
Answer: It bends light and then gathers light.
Explanation:
Answer:
It makes a larger image of the object
Explanation:
in short easy answer pls!
Answer:
Air always moves from high-pressure places to low-pressure places. This means air moves from denser air to less dense air. This movement of air results in wind. If, for example, there was an area of high-pressure air east of an area of low-pressure air, then the wind would be coming in from the east.
Explanation:
radio waves have long wavelengths.
What does this tell you about their frequency?
A they have high frequencies.
B. they have low frequencies
C. frequency is unrelated to wavelength.
Answer:
B. they have low frequencies because a longer wavelength means that the wave moves slower thus meaning it has a lower frequency.