New Media refers to digital and networked information and communication technologies that began emerging in the later half of the twentieth century. The correct option is D.
The term New Media refers to digital and networked information and communication technologies that began emerging in the latter half of the twentieth century. It refers to the shift from traditional mass communication media to digital media such as the internet, social media, mobile apps, and digital streaming platforms.New media also refer to the convergence of digital media, including video, text, graphics, and audio. The primary function of new media is to make information accessible and to communicate with others. New media has allowed users to interact with digital information and media in a more active and participatory way. This type of media has redefined the way people receive and share information, as well as how they interact with the world around them.Therefore, the correct option is D.Learn more about technologies here: https://brainly.com/question/7788080
#SPJ11
Lab Steps
You work at a computer repair store. A customer brought in a computer for repairs. The computer has the following specifications: Intel i5 8600K processor. 16 GB DDR4 memory. Three SATA hard drives, one with the operating system installed, the other two for storing data. Single SATA optical drive. You replaced the power supply in the computer, and now the computer won't boot. In this lab, your task is to diagnose and correct the problems. You will know that you have successfully corrected all the problems when: The computer recognizes all the components in the BIOS (including the correct amount of memory). The computer boots into Windows. All the drives are shown in Explorer.
The following are the steps to diagnose and correct the problems after replacing the power supply in the computer: Step 1: The first thing you should do is turn on the computer to see what happens.
Step 2: If the computer turns on but doesn't boot into the operating system, you should enter the BIOS to verify that all components are correctly recognized. This can typically be done by pressing the F2 or Delete key when the computer starts up.
Step 3: If all components are not correctly recognized, check that all power connectors are properly attached to the motherboard and components.
Step 4: Check that the hard drives are correctly connected and properly detected in the BIOS. If the hard drives are not detected, make sure that they are properly connected to the motherboard and power supply.
Step 5: Check that the memory is correctly detected in the BIOS. If the memory is not detected, make sure that the RAM is properly seated in the motherboard.
Step 6: Check that the optical drive is correctly detected in the BIOS. If the optical drive is not detected, make sure that it is properly connected to the motherboard and power supply.
Step 7: If everything is correctly detected in the BIOS, try booting into Windows. If the computer boots into Windows and all drives are shown in Explorer, you have successfully corrected all the problems. If not, further troubleshooting may be required.
To learn more about "operating system", visit: https://brainly.com/question/30225416
#SPJ11
unified communications (uc) is an umbrella term for integrated, multi-media communications controlled by an individual user for both business and social purposes. uc integrates all of the following except? Select one: a.Social media. b.Data. c.Voice. d.Video
Unified communications (UC) is an umbrella term for integrated, multi-media communications controlled by an individual user for both business and social purposes. UC integrates all of the following except: b. data.
Unified Communications (UC) is an all-in-one communications system that combines the integration of real-time communication tools like voice, instant messaging (IM), video conferencing, desktop sharing, data sharing, and more, with non-real-time communication tools like email, voicemail, SMS, and fax.The primary objective of Unified Communications (UC) is to unify all communication channels and tools, making communication more straightforward, faster, and more efficient. UC technology also integrates these different channels into a single interface or platform, allowing users to access and manage them all from one place. Therefore, UC integrates all of the following except data.
Learn more about Unified communications: https://brainly.com/question/30177142
#SPJ11
your web application needs four instances to support steady traffic nearly all of the time. on the last day of each month, the traffic triples. what is a cost-effective way to handle this traffic pattern?
One cost-effective way to handle the traffic pattern in this scenario is to use an auto-scaling group.
An auto-scaling group is a group of instances that are automatically scaled up or down based on the current demand for the application.
To handle the steady traffic nearly all of the time, you could set up the auto-scaling group to maintain a minimum of four instances running at all times. When traffic starts to increase, the auto-scaling group would add more instances to handle the load. This would ensure that the application can handle the increased traffic without being overwhelmed, while also keeping costs down during periods of low traffic.
During the last day of each month, when the traffic triples, the auto-scaling group can be configured to scale up more aggressively by adding additional instances to handle the higher load. Once the traffic subsides, the auto-scaling group can be scaled back down to the minimum number of instances needed to handle the steady traffic.
By using an auto-scaling group in this way, you can ensure that your application can handle the varying traffic patterns while also keeping costs down by only using the resources you need when you need them.
You can learn more about auto-scaling group at
https://brainly.com/question/15169837
#SPJ11
how base allows you to store only one version of data?
By utilising the idea of normalisation, a "base" (or database) in a database enables you to store only one version of the data.
Database design uses the normalisation process to reduce redundancy and enhance data integrity. It entails decomposing a database into smaller, more manageable tables and creating connections among them. Each item of data is therefore kept in a single location, and all references to that data are made of that location alone. This makes the database more effective and simpler to administer by reducing data redundancy and enhancing data consistency. There are different levels of normalisation, and each has its own specifications on how to arrange data. The end result of normalising is to produce a database that is dependable and simple to use, resulting in more consistent and efficient data administration.
Learn more about normalisation here:
https://brainly.com/question/30505015
#SPJ4
Kevin, the trainee analyst at Lynach TechSystems, is in charge of allocating suitable Unified Modeling Language (UML) notations to a particular class diagram. In a given diagram, Kevin is designing a relationship in which a given employee can have no payroll deductions or he/she can have many deductions. Which of the following notations should Kevin write to mark this relationship?
a.1
b.0..*
c.1..*
d.0..1
The notation that Kevin should write to mark the relationship between an employee and payroll deductions where an employee can have no payroll deductions or he/she can have many deductions is "0..*."
A class diagram is a kind of diagram in UML that depicts the structure of a framework by indicating the classes that make up the system, their attributes, and the relationships between them. It portrays a method or an application in terms of the classes and interfaces that make it up and the collaborations between those elements that implement the behavior of the entire system. A relationship in UMLA relationship in Unified Modeling Language (UML) is a connection between two or more things.
These things can be entities, classes, components, actors, or any other model element. There are several types of relationships in UML, including inheritance, association, aggregation, and composition, among others.
Learn more about UML: https://brainly.com/question/15078406
#SPJ11
suppose we run the stop and wait arq protocol on a link, with 50% line utilization. the link is now replaced with a new one that has half the round trip delay and six times the bit rate. if we do not change the frame length, how much will be the new line utilization? g
If the frame length is not changed, we have to find the new line utilization when the stop and wait ARQ protocol runs on a new link. The new line utilization will be 50%.
The given parameters are: the old link has 50% line utilization, half the round trip delay, and six times the bit rate. The frame length is not changed. We have to calculate the new line utilization. We know that the utilization factor of stop-and-wait ARQ is:
U={L}{2a}
Where, L is the frame length, and a is the round trip delay. Since L and a do not change with the new link, the utilization factor is also constant. Therefore, the new line utilization will also be 50%.
Therefore, the new line utilization will be 50%.
To learn more about "protocol", visit: https://brainly.com/question/31110840
#SPJ11
Tim has been contracted to install a wireless connection at the head office of Travis Roadways. The head office is located in between two manufacturing units because of which there is a lot of noise in the wireless spectrum. The management has requested Tim to ensure that the network connection provides reliable delivery of time-sensitive data so that they can conduct meetings with other branch divisions via video streaming. Analyze the RSSI (received signal strength indicator) level required for Tim to establish the connection functional as per the requirements.
Group of answer choices
a. The RSSI level should at least be -50 dBm.
b. The RSSI level should at least be -90 dBm.
c. The RSSI level should at least be -70 dBm.
d. The RSSI level should at least be -80 dBm.
The RSSI (received signal strength indicator) level required for Tim to establish the connection functional as per the requirements is -70 dBm. The correct answer is Option C.
What is RSSI?Received Signal Strength Indicator (RSSI) is an estimated measurement of the signal quality received by the wireless device antenna. A wireless device antenna with a low RSSI value might need a new or improved antenna. RSSI is measured in dBm (decibel milliwatts) and is shown as a negative number because it indicates the degree of signal loss (-50 dBm is a stronger signal than -80 dBm).
What is the RSSI level required to establish the connection functional as per the requirements?Based on the provided requirements, Tim must guarantee that the network connection is stable and can transmit time-sensitive data. Tim must determine the minimum RSSI level that is acceptable for this operation. The acceptable RSSI level is -70 dBm.
Learn more about RSSI here: https://brainly.com/question/27785313
#SPJ11
The following sort method correctly sorts the integers in elements into ascending order.
Line 1: public static void sort(int[] elements)
Line 2: {
Line 3: for (int j = 1; j < elements.length; j++)
Line 4: {
Line 5: int temp = elements[j];
Line 6: int possibleIndex = j;
Line 7: while (possibleIndex > 0 && temp < elements[possibleIndex - 1])
Line 8: {
Line 9: elements[possibleIndex] = elements[possibleIndex - 1];
Line 10: possibleIndex--;
Line 11: }
Line 12: elements[possibleIndex] = temp;
Line 13: }
Line 14: }
Consider the following three proposed changes to the code:
Change 1
Replace line 3 with:
Line 3: for (int j = elements.length - 2; j >= 0; j--)
Change 2
Replace line 7 with:
Line 7: while (possibleIndex > 0 && temp > elements[possibleIndex - 1])
Change 3
Replace line 7 with:
Line 7: while (possibleIndex < elements.length - 1 && temp < elements[possibleIndex + 1])
and replace lines 9-10 with:
Line 9: elements[possibleIndex] = elements[possibleIndex + 1];
Line 10: possibleIndex++;
Suppose that you wish to change the code so that it correctly sorts the integers in elements into descending order rather than ascending order. Which of the following best describes which combinations of the proposed changes would achieve this goal?
A) Enacting any of the three changes individually
B) Enacting changes 1 and 2 together, or enacting change 3 by itself
C) Enacting changes 1 and 3 together, or enacting change 2 by itself
D) ONLY enacting changes 1 and 2 together
E) ONLY enacting change 2 by itself
We must change the code to sort the array in reverse order in order to sort the integers in descending order. the right response is putting into effect adjustments 1 and 3 simultaneously, or only change 2.
How do you use descending order to order an array of integers?Java requires that you utilise the reverse Order() function from the Collections class to sort an array in descending order. The array is not parsed when using the reverse Order() method. Instead, it will only change the array's natural ordering.
Which sorting method is applied to the array's items in the example above?The quicksort algorithm is both the most popular and effective sorting method.
To know more about array visit:-
https://brainly.com/question/13107940
#SPJ1
12. Another editor to make a web page is called __________ which allows a web page to be created visually. I NEED HELP BAD
Answer:
HTML Editor
Explanation:
its a program for editing HTML
A band of color appears behind text in paint whe we choose the option____
A band of color appears behind text in paint when we choose the option Text Background.
In MS Paint, when you select the Text tool in Paint and start typing, the Text toolbar appears at the top of the screen. One of the options on this toolbar is Text Background, which is represented by a small paint bucket icon.
Clicking on the Text Background icon will open a drop-down menu with various color options. Selecting one of these colors will add a solid colored background behind the text you have typed. This can be useful for adding emphasis or making text easier to read when placed on a busy or complex background.
Note that this option only works when you are adding text using the Text tool. It will not work for other drawing tools or shapes in Paint.
Learn more about Text tool here brainly.com/question/14351471
#SPJ4
T/F for two series of 20 trials, average reaction times will be faster for the series when the foreperiods are a constant length of time compared to when the foreperiods are varied lengths of time.
The given statement is true because for two series of 20 trials, average reaction times will be faster for the series when the foreperiods are a constant length of time compared to when the foreperiods are varied lengths of time.
The given statement is true because the foreperiod, which is the time interval between a warning signal and a target stimulus, has been shown to have a significant effect on reaction time. When the foreperiods are a constant length of time, individuals can prepare and anticipate the target stimulus, leading to faster reaction times.
In contrast, when the foreperiods are varied lengths of time, individuals may have difficulty predicting the target stimulus, leading to slower reaction times. Therefore, on average, reaction times will be faster for the series with constant foreperiods compared to the series with varied foreperiods.
You can learn more about warning signal at
https://brainly.com/question/30792775
#SPJ11
if during the experiment described in the passage, fraction f is taken from the iec device and then titrated, which of the following is the most likely to be the titration curve that results?
This shape of the titration curve indicates that the fraction f contains a weak acid or a weak base.
If during the experiment described in the passage, fraction f is taken from the IEC device and then titrated, the most likely titration curve that would result is a pH vs. volume curve with a sharp peak (sharp increase in pH) followed by a plateau at a higher pH value.
What is IEC?
Ion exchange chromatography (IEC) is a method of separating and analyzing complex biochemical samples based on their charge. During the experiment described in the passage, fraction f is taken from the IEC device and then titrated.A titration curve represents the pH value of a solution at different points during a titration. It plots pH against the volume of the titrant (usually an acid or a base) added to the analyte (the substance being analyzed).The most likely titration curve that would result from the titration of fraction f taken from the IEC device is a sharp peak followed by a plateau at a higher pH value.
Learn more about titration
brainly.com/question/2728613
#SPJ11
A tool with which you can take a quick snapshot of part of a screen, and then add it to your document:a. sectionb. suppressc. screen clippingd. justified
A tool with which you can take a quick snapshot of part of a screen, and then add it to your document is screen clipping.
Screen Clipping is a feature in the Microsoft Office Suite that enables you to capture a portion of a screen or a window from which you want to extract data. It is a built-in utility that can be used to capture and store the most important elements of a digital document or a web page. It allows you to copy a portion of your screen and paste it into your documents, such as a word document or a presentation slide, without needing to save it as a separate file. The steps to take a screen clipping are as follows:
Open the document, file, or window from which you want to capture the screen clipping.On the Insert tab, in the Illustrations group, click the Screenshot button.On the drop-down list, pick Screen Clipping.On the screen, you'll see a cross-hair cursor that you can drag to pick the portion of the screen you want to capture. After you've chosen the region, release the mouse button. A clipping of the chosen area will be added to your document.Learn more about screen clipping visit:
https://brainly.com/question/11726720
#SPJ11
What are some types of MDM software that can be used to push applications to Macs?
Popular MDM solutions for Macs include Jamf Pro, FileWave, Mosyle Manager, and Addigy. Each of these solutions offers a variety of features for managing and securing Mac devices.
MDM (mobile device management) software can be used to manage and secure Mac devices, as well as to push applications and updates to them. Popular MDM solutions for Macs include Jamf Pro, FileWave, Mosyle Manager, and Addigy. Jamf Pro is one of the leading MDM solutions for Macs. It provides features such as application deployment, inventory tracking, security configuration, and user privacy settings. FileWave is a comprehensive MDM solution that is capable of managing Mac, iOS, and Android devices. It offers a wide range of features, including remote control, software and patch management, as well as reporting and compliance tools.
Mosyle Manager is a cloud-based MDM solution that is focused on macOS devices. It provides features such as inventory tracking, application deployment, and device monitoring. Addigy is another cloud-based MDM solution that is tailored for Macs. It provides features such as remote control, software deployment, security configuration, and compliance monitoring.
To learn more about Macs;
https://brainly.com/question/18267366
#SPJ11
How many lines does the cache have?
The number of lines a cache has depends on the cache size and the cache line size, but it is typically between 16 and 512.
Common cache line sizes are 32, 64, and 128 bytes. The number of lines a cache has is determined by dividing the cache size by the cache line size. For example, a 64-kilobyte cache with 64-byte lines has 1024 cache lines. The more cache lines a cache has, the more data it can store, and the faster it can access frequently used data.
A cache is a hardware component that stores frequently used data to reduce access time and speed up the computer's performance. The cache is divided into a fixed number of blocks or lines, each of which contains a subset of the data stored in the main memory.
The size of each cache line determines how much data can be stored in each block, and the cache size determines the total number of lines that can be stored in the cache.
Learn more about cache line https://brainly.com/question/14845501
#SPJ11
what is the media access method used by ethernet? group of answer choices polling csma/ca csma/cd token passing
The media access method used by Ethernet is (c) CSMA/CD (Carrier Sense Multiple Access with Collision Detection).
In CSMA/CD, each device on the Ethernet network listens for carrier signals on the network before attempting to transmit data. If a device detects a carrier signal, it waits for the transmission to complete before attempting to transmit its own data.
If two devices attempt to transmit data at the same time, a collision occurs, and both devices stop transmitting and wait for a random amount of time before attempting to transmit again. This collision detection mechanism is essential for preventing data corruption and ensuring that each device has an opportunity to transmit its data fairly.
Polling and token passing are media access methods used by other networking technologies, such as Token Ring and FDDI.
Thus, option C is the correct answer.
You can learn more about ethernet at
https://brainly.com/question/28314786
#SPJ11
what is the term that describes the nesting of protocols into other protocols: access control user datagram transmission control encapsulation?
The term that describes the nesting of protocols into other protocols is "Encapsulation."
Encapsulation is a technique used in computer networks in which one protocol is nested in another protocol. When data is transmitted from one network to another, the protocol that is used at each stage of the transfer will be dependent on the type of device or network that is being used. One protocol can encapsulate another protocol so that the two protocols can work together seamlessly.
Access control is the process of limiting who has access to a network or system. User Datagram Protocol (UDP) is a transport protocol that is used to send data over the internet. Transmission Control Protocol (TCP) is another transport protocol that is used to send data over the internet.
Encapsulation is the process of placing one message inside another message. When a protocol is nested inside another protocol, the protocol that is being nested is the payload of the protocol that is doing the nesting. The protocol that is doing the nesting adds a header to the protocol that is being nested to create a new message that can be transmitted over the network.
Therefore, the correct answer is encapsulation.
To learn more about "encapsulation", visit: https://brainly.com/question/31143399
#SPJ11
Formulate the Pacman Game with two different goals. Pacman can start at any position in the maze. The starting position is also called birth location. It then can freely turn its direction to face up, down, left, or right.
a. Formulate this problem with Goal 1: Find a path from the birth location to a certain point in the maze.
b. Formulate this problem with Goal 2: Eat all the food in the maze. c. Suppose there are 180 distinct Pacman (x,y) positions. Only one Pacman and three ghosts are in the same maze. Each ghost can be in 8 distinct (x,y) positions. There are 40 food pellets, each of which can be eaten or not eaten. Please answer the following questions. • What is the size of the state space? Explain your answer. • How many stating states for pathing? Explain your answer. • How many states for the Goal 2 (eat-all-food)? Explain your answer.
a. Problem Formulation with Goal 1:
State: Pacman's current position in the maze.Initial State: Pacman's birth location.What is the Pacman Game?In continuation of question A,
Actions: Pacman can move in any of the four directions (up, down, left, or right), as long as there is no wall or obstacle blocking its path.Transition Model: Given Pacman's current position and action, the model returns the new position that Pacman would occupy after taking that action.Goal Test: The goal is to reach a certain point in the maze. The goal test checks whether Pacman's current position is the same as the specified point.Path Cost: The cost of each step is 1.b. Problem Formulation with Goal 2:
State: Pacman's current position in the maze, as well as the positions of all the remaining food pellets.Initial State: Pacman's birth location and the positions of all the food pellets.Actions: Pacman can move in any of the four directions (up, down, left, or right), as long as there is no wall or obstacle blocking its path.Transition Model: Given Pacman's current position and action, the model returns the new position that Pacman would occupy after taking that action, as well as the new positions of any food pellets that Pacman has eaten.Goal Test: The goal is to eat all the food pellets in the maze. The goal test checks whether there are no more food pellets remaining.Path Cost: The cost of each step is 1.c. For this part, we need to calculate the size of the state space, the number of starting states for pathing, and the number of states for Goal 2.
Size of state space:
There are 180 distinct Pacman positions.Each ghost can be in 8 distinct positions, and there are 3 ghosts.There are 40 food pellets, each of which can be eaten or not eaten.Therefore, the size of the state space is:(180 possible Pacman positions) x (8³ possible ghost positions) * (2⁴⁰ possible food pellet states) = 5.72 x 10⁴⁰ Number of starting states for pathing:There are 180 possible starting positions for Pacman.Therefore, the number of starting states for pathing is 180.Number of states for Goal 2:For Goal 2, each food pellet can either be eaten or not eaten, so there are 2⁴⁰ possible food pellet states.There are 180 possible Pacman positions.Each ghost can be in 8 possible positions, and there are 3 ghosts.Therefore, the number of states for Goal 2 is:
(180 possible Pacman positions) x (8³ possible ghost positions) x (2⁴⁰ possible food pellet states) = 5.72 x 10⁴⁰ .
Learn more about Pacman from
https://brainly.com/question/14533587
#SPJ1
List all the disadvantages of fort watchtower
A fort's drawbacks include limiting your range of motion and making it difficult to organize a sizable force inside the fort prior to a combat. Forts are useful stopovers for lodging troops traveling a long distance outside of conflict.
A fort is a fortified military structure designed to protect a specific location or area from external threats. Forts can vary in size and shape, and can be constructed using a variety of materials and techniques. Some forts are built to withstand attacks from land or sea, while others are designed to protect natural resources such as water sources or transportation routes. Historically, forts have been used by armies and other military forces as defensive positions during battles and wars. Today, many forts have been repurposed as historical landmarks, museums, or tourist attractions.
Learn more about routes here brainly.com/question/18850324
#SPJ4
Reducing duplication of code is one of the advantages of using a loop structure. Your answer: Yes / Nο
Yes, reducing duplication of code is one of the significant advantages of using a loop structure. A loop structure, also known as iteration, is a sequence of instructions that is continually repeated until a specific condition is met.
Loop structures are widely used in programming to solve a range of problems that require repetitive operations.For example, consider a situation where a program needs to print the values of ten variables. Without the use of loops, the programmer would have to write ten lines of code that are identical except for the variable names. Using a loop, the same operation can be performed with only a few lines of code, and the repetition of the code can be avoided. This greatly reduces the chances of making errors while writing the code.
The following are some of the benefits of using loop structures in programming:Reduced duplication of codeSimplicity of the codeSaves time, effort and improves productivityFlexibility in handling large amounts of dataHelps in managing repetitive tasksEliminates chances of missing out on variablesLoops allow for code to be more concise, readable and maintainableConclusionIn conclusion, using loops in programming has several advantages. One of the most significant advantages of using a loop structure is that it reduces duplication of code. It also saves time, effort, improves productivity, helps in managing repetitive tasks, and eliminates the chances of missing out on variables.
For such more questions on loop structure:
brainly.com/question/30615872
#SPJ11
What is workplace writing? (Gradpoint)
Workplace writing is B, fact-based writing that gives information in a structured format.
What does workplace writing means?
Workplace writing refers to any written communication that occurs in a professional context, such as emails, reports, memos, proposals, and presentations. It encompasses a wide range of formats and styles but generally involves clear, concise, and effective communication that is tailored to the specific audience and purpose.
The content may be fact-based or persuasive, depending on the situation, and often includes research, analysis, and critical thinking skills. Workplace writing is an essential skill for success in many industries and professions.
To learn more about Workplace, visit: https://brainly.com/question/29801968
#SPJ1
How are port numbers used in the TCP/IP encapsulation process?
Answer:
In the TCP/IP encapsulation process, port numbers are used to figure out which application or service is sending or receiving data over the network.
There are two kinds of port numbers in the TCP/IP protocol suite: source port numbers and destination port numbers.
When a device wants to use TCP/IP to send data to another device, it gives the data a source port number. This port number lets you know which service or application is sending the data. The number of the source port is a 16-bit number that can be between 0 and 65535.
The device that gets the data also gets a port number. This number is called the destination port number. This port number lets you know which program or service will get the data. The number of the destination port is also a 16-bit number that can be anywhere from 0 to 65535.
When the data is sent over the network, it is wrapped up in TCP/IP packets, which include the port numbers for both the source and the destination. The device that gets the data uses the port numbers to find the app or service that should get the data.
For example, when a web browser on a device sends a request for a webpage to a web server, it uses port number 80 as the destination port number, since port 80 is the standard port for HTTP traffic. The web server then answers the request by using the source port number that the web browser gave it.
Port numbers are used in the TCP/IP encapsulation process to identify specific applications or services. They ensure that data packets are delivered to the correct destination based on the port number assigned to the application or service.
Explanation:Port numbers are used in the TCP/IP encapsulation process to identify specific applications or services that are running on a device. They are part of the transport layer of the TCP/IP protocol suite and help ensure that data packets are delivered to the correct destination.
For example, when a client sends a request to a web server, it uses port number 80 for HTTP or port number 443 for HTTPS. These port numbers allow the data packets to be properly routed to the web server on the network.
Port numbers range from 0 to 65535, and there are well-known port numbers assigned to commonly used services, such as port 21 for FTP, port 25 for SMTP, and port 80 for HTTP.
Learn more about the TCP/IP encapsulation process here:https://brainly.com/question/31607847
review the below list of key terms and determine which one typically occurs during operational business process improvement
Reengineering is one that frequently happens when operational business process improvement is being made.
What is an operational business process?These procedures, which are often referred to as main processes, work with the customer's core business and value chain to produce a good or service. Operational procedures are crucial business operations that help companies achieve goals like earning income.Operational processes (core business processes) are those that provide customers and the business with immediate benefits. Those are the actions that generate money. Examples include the creation of items, the order-to-cash procedure, and the delivery of goods to clients. Key operational procedures typically fall under one of the following categories: Vision and strategy development. creating and running goods and services. selling and marketing goods and services. service delivery.To learn more about operational business process, refer to:
https://brainly.com/question/29346676
Which of the following commands can be used to scan a filesystem for disk usage, create, check, and repair quota files? a. chkquota b. quotacheck c. edquota d. quota
The following command can be used to scan a filesystem for disk usage, create, check, and repair quota files: quota check.
A file system is the way an operating system keeps track of files on a disk or partition, defining where files are stored and how they are organized. A filesystem is an organizational structure that enables files to be stored, found, and retrieved more quickly and efficiently. Every partition and disk in a Linux or UNIX system is referred to as a file system because it contains files, directories, and other files required to operate the operating system. A filesystem is a method for organizing and storing data that includes files and directories, as well as the ways in which they can be accessed, used, and managed.The quotacheck command is used to check a filesystem for disk usage, create, verify, and repair quota files. This utility examines the filesystem and reports any discrepancies between the current usage of disk space and the limits set by the administrator. In this way, it generates the aquota. file that stores the user's and group's quota data in a human-readable format. Quotacheck scans the specified file system for disk usage, repairs any quota file inconsistencies, and creates an up-to-date quota file with the current usage for each quota-enabled partition on the file system.Learn more about filesystem here: https://brainly.com/question/14614936
#SPJ11
Which of these is not generally a good practice for telephone use?a) Whenever possible, telephone conversations involving sensitive information are conducted in non-public areas, where they cannot be overheard.b) When discussing confidential information on the phone, the other person's identity is confirmed before proceeding with the conversation.c) Using voicemail systems and answering machines that do not require a password or PIN for access.d) Only names and callback numbers are left on voicemail or answering machines -- or with the person that takes the message -- if someone cannot be reached directly.
Using voicemail systems and answering machines that do not require a password or PIN for access is not generally a good practice for telephone use. (Option C)
What is the explanation for the above response?
Using voicemail systems and answering machines that do not require a password or PIN for access is not generally a good practice for telephone use. This can make it easy for unauthorized individuals to access confidential information left on the voicemail or answering machine.
It is important to use secure voicemail systems and answer machines that require a password or PIN for access, to protect sensitive information.
A, B, and D are generally good practices for telephone use to ensure the confidentiality and privacy of information discussed over the phone.
Learn more about telephone use at:
https://brainly.com/question/20608530
#SPJ1
Using voicemail systems and answering devices without a password or PIN is not a recommended practice for telephone use due to the security issues it presents.
Explanation:The best practice not recommended for telephone use among the options given is c) Using voicemail systems and answering machines that do not require a password or PIN for access. This practice is not secure and can potentially expose your personal or confidential information to others. Despite the convenience it gives, it is a major security concern as it neglects the aspect of privacy and authorization. Therefore, one should always use voicemail systems or answering machines that require a password or PIN for access to ensure the confidentiality of the information.
Learn more about Telephone Use Best Practices here:https://brainly.com/question/33809332
listen to exam instructionsyou have placed a file transfer protocol (ftp) server in your dmz behind your firewall. the ftp server is to be used to distribute software updates and demonstration versions of your products. however, users report that they are unable to access the ftp server.what should you do to enable access?
In order to enable access to the FTP server, you will need to configure your firewall rules to allow for traffic from the FTP port. Specifically, you need to create a rule to allow incoming traffic on port 21 (the port for FTP control), as well as ports 20 and 1024-65535 for FTP data.
To enable access to the FTP server, you should follow the steps mentioned below: Step 1: Check Firewall Settings. The first thing you should do is check the firewall settings to see if the FTP server is blocking connections. If it is, you will need to configure the firewall to allow FTP traffic. Step 2: Check FTP Server Settings. After checking the firewall settings, check the FTP server settings to make sure that the FTP server is configured correctly.
Make sure that the FTP server is set up to accept connections from the and that the FTP ports are open. Step 3: Check the Connection. You should also check the internet connection to see if there are any problems. If there are problems with the internet connection, you will need to resolve them before you can access the FTP server. Step 4: Use Passive FTP ModeIf you are still having problems accessing the FTP server, you can try using passive FTP mode. This will allow you to connect to the FTP server even if there are issues with the internet connection. Step 5: Contact SupportIf none of the above steps work, you should contact support to get help with troubleshooting the problem with the FTP server.
Read more about the server:
https://brainly.com/question/27960093
#SPJ11
a 108-watt light bulb is left on for 28 hours. how much did it cost to operate the light bulb if electricity costs 0.04 dollars per kwh?
The cost to operate the 108-watt light bulb for 28 hours is 0.12096 dollars.
To calculate how much it costs to operate a 108-watt light bulb left on for 28 hours if electricity costs 0.04 dollars per kwh, we need to use the formula:
Energy used (in kWh) = Power (in watts) x Time (in hours) / 1000
Since the power is given in watts and the time is given in hours, we will calculate the energy used in kilowatt-hours first:
Energy used = 108 watts x 28 hours / 1000
= 3.024 kWh
Now we can calculate the cost of electricity used:
Cost = Energy used x Cost per kWh= 3.024 kWh x 0.04 dollars/kWh
= 0.12096 dollars
Therefore, it cost 0.12096 dollars to operate the light bulb for 28 hours.
You can learn more about light bulbs at: brainly.com/question/29568810
#SPJ11
Design a for loop that gets 6 integer numbers from a user, accumulates the total of them, then displays the accumulated total to the user. Just write the code segment to show what is asked, not a complete program. however, declare any variables that you need to use. Use a semicolon (;) at the end of each line of code so I can tell when you use a new line in your code.
In bash shell script, please.
Answer:
Design a for loop that gets 6 integer numbers from a user, accumulates the total of them, then displays the accumulated total to the user. Just write the code segment to show what is asked, not a complete program. however, declare any variables that you need to use. Use a semicolon (;) at the end of each line of code so I can tell when you use a new line in your code.
In bash shell script, please.
Explanation:
Here is an example of how to write a bash shell script that uses a for loop to get 6 integer numbers from the user, accumulate their total, and display the accumulated total to the user:
#!/bin/bash
# declare a variable to store the total
total=0
# use a for loop to get 6 integer numbers from the user
for (( i=1; i<=6; i++ ))
do
echo "Enter integer number $i:"
read num
# add the number to the total
total=$(( total + num ))
done
# display the accumulated total to the user
echo "The total of the 6 numbers is: $total"
This script initializes the variable total to 0, and then uses a for loop to get 6 integer numbers from the user. Each number is added to the total variable using the += operator. Finally, the script displays the accumulated total to the user using the echo command.
Define a function FindTaxPercent() that takes one integer parameter as the age of a person, and returns the person's tax percent as a double. The tax percent is returned as follows: If a person's age is more than 80 years old, tax percent is 0.08. If a person's age is more than 20 and up to 80 years old, tax percent is 0.28. Otherwise, tax percent is 0.38. Ex: If the input is 85, the output is: 0.08
code:
#include
using namespace std;
/* Your code goes here */
int main() {
int personsAge;
cin >> personsAge;
cout << FindTaxPercent(personsAge) << endl;
return 0;
}
Below is the complete C++ code
CODE:#include <iostream>
using namespace std;
/* Your code goes here */
//function to return tax percentage
double FindTaxPercent(int age)
{
//if age is less than 80 return 0.08
if(age > 80)
return 0.08;
//if age is more tha 20 and less than 80 return 0.28
else if(age > 20 && age <=80)
return 0.28;
//else return 0.38
else
return 0.38;
}
//main function
int main() {
int personsAge;
cin >> personsAge;
cout << FindTaxPercent(personsAge) << endl;
return 0;
}
To know more about Tax, click on the link :
https://brainly.com/question/16423331
#SPJ1
A function FindTaxPercent() that takes one integer parameter as the age of a person, and returns the person's tax percent as a double are given below:
What is parameter?A parameter is a variable or set of variables that is used to define a model, system, or function. It is a measure of a system's behavior that is used to help predict the system's performance. Parameters can be used to adjust the behavior of a system, such as the size of a window or the voltage of a circuit. Parameters are also used to describe the behavior of a system, such as the speed of the wind or the temperature of a room.
double FindTaxPercent(int age)
{
double taxPercent;
if (age > 80)
{
taxPercent = 0.08;
}
else if (age > 20 && age <= 80)
{
taxPercent = 0.28;
}
else
{
taxPercent = 0.38;
}
return taxPercent;
}
To learn more about parameter
https://brainly.com/question/29990993
#SPJ1
A system failure has occurred. Which of the following restoration processes would result in the fastest restoration of all data to its most current state?Restore the full backup and the last incremental backupRestore the full backup and all differential backupsRestore the full backup and the last differential backupRestore the full backup and all incremental backups
In order to restore all data to its most current state, the fastest restoration process would be to restore the full backup and the last differential backup.
System failure refers to an event in which a system ceases to function properly. It occurs when a computer's hardware or software malfunctions, resulting in system instability. A system failure can result in data loss, system downtime, and lost productivity, among other things.
The fastest restoration process to restore all data to its most current state is to restore the full backup and the last differential backup. A differential backup is a backup that contains all data changed since the last full backup. This means that the most current version of the data is stored in the differential backup, and by restoring the full backup and the last differential backup, all data can be restored to its most current state. Other restoration processes such as restoring the full backup and all differential backups or all incremental backups may take longer because they require more backups to be restored.
To learn about restoration process:https://brainly.com/question/27795470
#SPJ11