which pair of substances could form a buffered aqueous solution? hno3, nano3 hcl, nacl nh3, naoh h3po4, nah2po4 h2so4, ch3cooh

Answers

Answer 1

A buffered aqueous solution can be formed by the pair H₃PO₄ and NaH₂PO₄. These substances can create a buffer because H₃PO₄ is a weak acid and NaH₂PO₄ is its corresponding conjugate base, allowing the solution to resist changes in pH.

A buffer solution is a solution with a static pH, i.e. its pH doesn't change even on the addition of a small amount of acid or base.  It is a water solvent-based solution which consists of a mixture containing a weak acid and the conjugate base of the weak acid or a weak base and the conjugate acid of the weak base. They resist a change in pH upon dilution or upon the addition of small amounts of acid/alkali to them.

To know more about buffer solution here

https://brainly.com/question/32095391

#SPJ4


Related Questions

5. use your percent purity calculations to determine the percent yield of your synthesis of aspirin.

Answers

To determine the percent yield of your synthesis of aspirin, the percent yield of your synthesis of aspirin is 96%.

To determine the percent yield of your synthesis of aspirin, you'll need to use the following formula:
Percent yield = (Actual yield / Theoretical yield) x 100
The actual yield is the amount of aspirin you obtained from the experiment, while the theoretical yield is the amount of aspirin you were expecting to obtain, based on your initial calculations.
To use your percent purity calculations, you would first find the actual yield by multiplying the crude yield by the percent purity. The percent purity is calculated by dividing the mass of the pure substance (in this case, aspirin) by the mass of the crude product.
For example, if you obtained 80 grams of crude product and found it to be 90% pure, the actual yield would be:
Actual yield = 80 grams x 0.90 = 72 grams
Next, you'll need to compare the actual yield to the theoretical yield. Let's say your initial calculations predicted a theoretical yield of 75 grams. You can now calculate the percent yield:
Percent yield = (72 grams / 75 grams) x 100 = 96%
In this example, the percent yield of your synthesis of aspirin is 96%.

To know more about aspirin visit :

https://brainly.com/question/22010907

#SPJ11

determine the ph in a 0.667 m nah solution. 0.12 14.18 13.82 0.18 13.88

Answers

The solution to determine the pH in a 0.667 M NaOH solution is to use the formula for calculating pH, which involves calculating the pOH first and then solving for pH using the equation pH + pOH = 14. The pH in this case is 13.82.

To determine the pH in a 0.667 M NaOH solution, you need to use the formula for calculating pH. First, calculate the pOH using the equation: pOH = -log[OH-]. In this case, [OH-] is 0.667 M, so pOH = -log(0.667) = 0.18.

Next, use the equation pH + pOH = 14 to calculate the pH. Rearrange the equation to solve for pH: pH = 14 - pOH.

Substituting the pOH value of 0.18, we get pH = 14 - 0.18 = 13.82. Therefore, the pH of a 0.667 M NaOH solution is 13.82.

In conclusion, the solution to determine the pH in a 0.667 M NaOH solution is to use the formula for calculating pH, which involves calculating the pOH first and then solving for pH using the equation pH + pOH = 14. The pH in this case is 13.82.

To know more about solution click here:

https://brainly.com/question/30665317

#SPJ11

Acid-catalyzed addition of alcohols to alkenes proceeds in a mechanism analogous to the acid-catalyzed addition of water to yield ethers.Draw curved arrows to show the movement of electrons in this step of the reaction mechanism

Answers

The curved arrow shows the movement of the proton from the acid catalyst to the alcohol, followed by the movement of the electrons from the alcohol to the carbocation formed from the alkene.

In more detail, the acid-catalyzed addition of alcohols to alkenes involves the protonation of the alkene by the acid catalyst, which generates a carbocation intermediate. The alcohol then acts as a nucleophile and attacks the carbocation, leading to the formation of an oxonium ion. In the final step, the oxonium ion is deprotonated by a water molecule or another molecule of alcohol, yielding the ether product. The curved arrows in this mechanism show the flow of electrons as the proton is transferred from the acid to the alcohol and as the electrons move from the alcohol to the carbocation intermediate.

Learn more about acid-catalyzed here;

https://brainly.com/question/31545166

#SPJ11

Write a hypothesis about what will happen to the air in the plastic bottle when its temperature is decreased. What relationship do you expect to find between temperature and volume?

Answers

When the temperature of the air inside a plastic bottle is decreased, the hypothesis suggests that the volume of the air will decrease due to the inverse relationship between temperature and volume, known as Charles's Law.

The hypothesis proposes that when the temperature of the air inside a plastic bottle is decreased, the volume of the air will decrease as well. This prediction is based on Charles's Law, which states that the volume of a gas is directly proportional to its temperature when pressure and the amount of gas remain constant.

According to this law, as the temperature decreases, the kinetic energy of the gas molecules decreases, causing them to move more slowly and collide less frequently with the container walls. Consequently, the average distance between gas molecules decreases, resulting in a reduction in volume. Therefore, the hypothesis posits that as the temperature of the air in the plastic bottle decreases, the volume of the air will also decrease, following the principles of Charles's Law.

Learn more about Charles's Law here: brainly.com/question/14842720

#SPJ11

the half life of argon is 6.32 days, how much of argon35 would be left after 50.56 days when there was initially 126.35 grams?

Answers

Let's break down the problem step-by-step.

1. Identify the given information: The half-life of argon-35 is 6.32 days, and the initial amount is 126.35 grams. You want to find the remaining amount after 50.56 days.

2. Calculate the number of half-lives that have passed: To do this, divide the total time elapsed (50.56 days) by the half-life (6.32 days).

50.56 days / 6.32 days = 8 half-lives

3. Calculate the remaining amount of argon-35: Since each half-life reduces the initial amount by half, we will multiply the initial amount by (1/2) raised to the power of the number of half-lives.

Remaining amount = Initial amount × (1/2)^number of half-lives
Remaining amount = 126.35 grams × (1/2)^8

4. Solve for the remaining amount: Using a calculator, compute the result.

126.35 grams × (1/2)^8 ≈ 0.49 grams

So, after 50.56 days, approximately 0.49 grams of argon-35 will be left from the initial 126.35 grams.

To know more about argon visit -

brainly.com/question/28645463

#SPJ11

true/false. cite the primary differences between addition and condensation polymerization techniques.

Answers

Cite the primary differences between addition and condensation polymerization techniques, the given statement is true their different techniques are the nature of the monomers involved, the reaction mechanism, and the presence or absence of a byproduct.

Addition polymerization, also known as chain-growth polymerization, involves the joining of monomers without the loss of any atoms or molecules. The monomers typically have a double bond, which breaks and forms a single bond with another monomer, creating a chain. This process continues until the polymer reaches its desired length. Examples of addition polymers include polyethylene and polystyrene.

Condensation polymerization, on the other hand, is a step-growth polymerization process where monomers with two or more reactive functional groups react to form a polymer. During this reaction, a small molecule, often water or methanol, is eliminated as a byproduct, examples of condensation polymers include polyesters and polyamides. In summary, the primary differences between addition and condensation polymerization techniques are the nature of the monomers involved, the reaction mechanism, and the presence or absence of a byproduct. Addition polymerization involves monomers with double bonds and no byproducts, while condensation polymerization involves monomers with reactive functional groups and produces a small byproduct molecule.

Learn more about addition polymerization here:

https://brainly.com/question/27354910

#SPJ11

Calculate the enthalpy change for the following reaction, using the enthalpies of formation provided below the equation.SO2Cl2(l) + 2H2O(l) −−−−> 2HCl(g) + H2SO4(l)Substance ∆Hfº (kJ/mol)SO2Cl2(l) -394.1H2O(l) -285.8HCl(g) -92.3H2SO4(l) -814.0

Answers

The enthalpy change of the reaction is -307.4kJ/mol.

There are several ways to determine the enthalpies of the reactants and products, depending on the information available. One common method is to use the standard enthalpies of formation (ΔHf) for the substances involved. The standard enthalpy of formation is the enthalpy change when one mole of a substance is formed from its constituent elements in their standard states at a specified temperature and pressure.

To calculate the enthalpy change for the given reaction, we need to use the formula:

ΔH = ΣnΔHfº(products) - ΣnΔHfº(reactants)

where ΔHfº is the standard enthalpy of formation of the substance, n is the stoichiometric coefficient of the substance in the balanced chemical equation, and the products and reactants are listed according to the chemical equation.

Using the given enthalpies of formation, we can substitute the values into the formula and calculate the enthalpy change:

ΔH = [2(-92.3) + (-814.0)] - [-394.1 + 2(-285.8)]
ΔH = -307.4 kJ/mol

Therefore, the enthalpy change for the reaction is -307.4 kJ/mol.

To learn more about Enthalpy change, visit :

https://brainly.com/question/29556033

#SPJ11

Consider how the structure of the starting material changes. What reaction has taken place? A. Hydration B. Hydrogenation C. Epoxidation Ozonolysis

Answers

The given options represent four different types of reactions that can take place in organic chemistry. Ozonolysis is the reaction that has taken place in the given scenario

Among the given options, the reaction that involves the breaking of a double bond in the presence of ozone and its replacement with oxygen is called ozonolysis.

This reaction occurs when ozone is added to an alkene, which results in the cleavage of the double bond and forms two carbonyl groups.

Ozonolysis is used as a powerful tool in organic synthesis to determine the structure of the starting material by identifying the products that are formed.

In summary, ozonolysis is the reaction that has taken place in the given scenario, which results in the cleavage of a double bond with the addition of ozone.

To know more about Ozonolysis, refer here:

https://brainly.com/question/30325381#

#SPJ11

the biggest carcinogenic exposure in the workplace is___

Answers

The biggest carcinogenic exposure in the workplace is dependent on the specific industry and workplace conditions.

Some examples of common carcinogenic exposures in the workplace include exposure to asbestos in the construction and manufacturing industries, exposure to benzene in the oil and gas industry, and exposure to ionizing radiation in the healthcare industry.

Asbestos is a group of fibrous minerals that was widely used in construction and insulation materials due to its heat-resistant properties. Prolonged exposure to asbestos can lead to severe health issues, including lung cancer, mesothelioma, and asbestosis.

It is important for employers to identify potential carcinogenic exposures in their workplace and implement measures to reduce or eliminate them to protect the health and safety of their employees.

To know more about carcinogenic exposure, click below.

https://brainly.com/question/14207968

#SPJ11

What is the molar mass of an unknown gas with a density of 5.35 g/l at 2.00 atm and 55.0 °c?

Answers

The molar mass of the unknown gas with a density of 5.35 g/l at 2.00 atm and 55.0 °c is 12.5 g/mol.

To calculate the molar mass of the unknown gas, we can use the Ideal Gas Law, which relates the pressure, volume, temperature, and number of moles of a gas: PV = nRT

where: P = pressure (in atm) V = volume (in liters) n = number of moles R = gas constant (0.0821 L·atm/(mol·K)) T = temperature (in Kelvin)

We can rearrange the Ideal Gas Law to solve for the number of moles: n = (PV) / (RT) We can then use the density of the gas to relate the number of moles to the mass of the gas: density = mass / volume mass = density x volume

Substituting this expression for mass into the Ideal Gas Law equation, we get: n = (P / RT) x (density x volume)

Finally, we can use the molar mass formula to solve for the molar mass: molar mass = mass / number of moles

Substituting all the given values and solving for the molar mass, we get: n = (2.00 atm / (0.0821 L·atm/(mol·K) x (55.0 °C + 273.15 K))) x (5.35 g/L x 1 L) = 0.427 mol

mass = density x volume = 5.35 g/L x 1 L = 5.35 g

molar mass = mass / number of moles = 5.35 g / 0.427 mol = 12.5 g/mol

Therefore, the molar mass of the unknown gas is 12.5 g/mol.

Know more about Ideal Gas Law here

https://brainly.com/question/28257995#

#SPJ11

was there a difference in the melting point of the crude and the melting point of the recrystallized product?

Answers

Yes, there is a difference between the melting point of the crude product and the recrystallized product. This is because recrystallization is a process of purification, where impurities are removed.

What is recrystallization?

Recrystallization is a process by which molecules of a chemical substance are reorganized into a more ordered, defined crystal structure. The process involves dissolving the compound in an appropriate solvent and then allowing it to slowly crystallize back out as it cools. The solvent can be chosen specifically to enhance the desired crystal structure.

The melting point of a substance is affected by the presence of impurities. Impurities disrupt the packing arrangement of the molecules, which lowers the melting point. When the impurities are removed, the packing arrangement of the molecules is no longer disrupted, resulting in a higher melting point. Therefore, the melting point of the crude product is lower than the melting point of the recrystallized product due to the removal of impurities during the recrystallization process.

To learn more about recrystallization

https://brainly.com/question/10194206

#SPJ4

The kb for a weak base is 1.2 x 10^-12. What will be the ka for its conjugate acid at 25°C?

Answers

The ka for the conjugate acid of the weak base will be 8.3 x 10^-3 at 25°C.

To find the ka of the conjugate acid, we can use the equation Kw = Ka x Kb, where Kw is the ion product constant of water (1 x 10^-14) and Kb is the base dissociation constant.

Rearranging the equation, we get Ka = Kw/Kb. Plugging in the given value of Kb (1.2 x 10^-12), we get Ka = (1 x 10^-14)/(1.2 x 10^-12) = 8.3 x 10^-3.

This means that the conjugate acid of the weak base is a stronger acid than water at 25°C, as its ka is greater than 1 x 10^-14 (the ka of water).

This information can be used to determine the acidity/basicity of solutions containing the weak base and its conjugate acid.

Learn more about conjugate acid here:

https://brainly.com/question/31229565

#SPJ11

according to the phase diagram shown below, the normal boiling point of this substance is __________°c.

Answers

To determine the normal boiling point of a substance from a phase diagram, you would typically need to locate the point where the liquid-vapor equilibrium curve intersects the atmospheric pressure line (usually 1 atm).

What is the normal boiling point of the substance according to the provided phase diagram?

To determine the normal boiling point of a substance from a phase diagram, you would typically need to locate the point where the liquid-vapor equilibrium curve intersects the atmospheric pressure line (usually 1 atm).

The temperature at this intersection point corresponds to the normal boiling point of the substance.

Without access to the specific phase diagram or information about the substance, it is not possible to provide an accurate answer or explanation.

Please provide the phase diagram or additional details for further assistance.

Learn more about normal boiling point

brainly.com/question/30638001

#SPJ11

what kind of compound will generate the most hydroxide ions in solution? select the correct answer below: strong acid strong base weak acid weak base

Answers

The compound that will generate the most hydroxide ions in solution is a strong base.

A strong base is a compound that completely dissociates in water, releasing hydroxide ions. Examples of strong bases include sodium hydroxide (NaOH) and potassium hydroxide (KOH). In contrast, weak bases only partially dissociate in water, so they generate fewer hydroxide ions. Strong acids, on the other hand, release more hydrogen ions (H+) than hydroxide ions, while weak acids release fewer hydrogen ions.

Therefore, the correct answer to the question is "strong base."

To know more about strong base visit:

https://brainly.com/question/9939772

#SPJ11

10. Calculate the energy needed, in kJ and in kcal, to completely melt a 20.0 lb bag of ice? (AH fusion = 334 J/g). 11. How much energy, in kJ, is required to raise the temperature of 1.00 lb of gold from 22.0 °C to its melting point of 1064 °C, and then melt the gold at that temperature? The specific heat capacity of gold is 0.128 J/g °C; ΔHfusion = 12.6 J/g).

Answers

724.36 kcal of energy needed to completely melt a 20.0 lb bag of ice, we first need to convert pounds to grams. One pound is equal to 453.592 grams. So, the mass of the ice is :-20.0 lb * 453.592 g/lb = 9071.84 g

we use the given enthalpy of fusion to calculate the energy needed to melt the ice:

Energy = mass * AH fusion = 9071.84 g * 334 J/g = 3031290.56 J

Finally, we convert the energy from joules to kilojoules and from kJ to kcal:

Energy in kJ = 3031290.56 J / 1000 = 3031.29 kJ

Energy in kcal = 3031.29 kJ / 4.184 = 724.36 kcal

11. To calculate the energy needed to raise the temperature of 1.00 lb of gold from 22.0 °C to its melting point of 1064 °C and then melt the gold, we need to break the problem into two parts.

First, we need to calculate the energy needed to raise the temperature of the gold:

Energy = mass * specific heat capacity * ΔT = 1.00 lb * 453.592 g/lb * 0.128 J/g °C * (1064 °C - 22.0 °C) = 6.03 × 10^4 J

Next, we need to calculate the energy needed to melt the gold at its melting point:

Energy = mass * ΔHfusion = 453.592 g * 12.6 J/g = 5.71 × 10^3 J

Finally, we add the two energies together to get the total energy needed:

Total energy = 6.03 × 10^4 J + 5.71 × 10^3 J = 6.60 × 10^4 J or 66.0 kJ

In summary, the energy needed to melt a substance is given by its enthalpy of fusion multiplied by its mass. The energy needed to raise the temperature of a substance is given by its specific heat capacity, mass, and the change in temperature.

To find the total energy needed to both raise the temperature and melt a substance, we need to add the two energies together.

To know more about energy refer here :-

https://brainly.com/question/8630757#

#SPJ11

What is the maximum number of electrons that can occupy and orbital labeled dxy and why?
1, 2, 3, or 4?

Answers

2 is the maximum number of electrons that can occupy and orbital labeled dxy. There are actually five 3d orbitals

There are five 3d orbitals, with a total of 10 electrons that can fit into each of them. The principle quantum quantity, n, the angle of motion quantum quantity, l, and the magnetic quantum quantity, ml, all characterise an orbital. There are actually five 3d orbitals, with a total of 10 electrons that can fit into each of them. 2 is the maximum number of electrons that can occupy and orbital labeled dxy.

To know more about orbitals, here:

https://brainly.com/question/31962087

#SPJ1

What is the limiting reactant if 17.5 moles of o2 react with 28.0 moles of h2?
(please show work!)

Answers

To determine the limiting reactant, we need to compare the moles of each reactant to the stoichiometric ratio in the balanced equation. In this case, we have 17.5 moles of O2 and 28.0 moles of H2. By comparing the moles of each reactant to their stoichiometric coefficients, we can determine the limiting reactant.

The balanced equation for the reaction between O2 and H2 is:

2H2 + O2 -> 2H2O

According to the stoichiometry of the equation, it takes 1 mole of O2 to react with 2 moles of H2.

To determine the limiting reactant, we compare the moles of each reactant to their stoichiometric coefficients.

For O2: 17.5 moles / 1 = 17.5 moles

For H2: 28.0 moles / 2 = 14.0 moles

From the calculations, we can see that the moles of H2 (14.0 moles) is smaller than the moles of O2 (17.5 moles). Therefore, the limiting reactant is H2.

The limiting reactant is the one that is completely consumed in the reaction and determines the maximum amount of product that can be formed. In this case, since H2 is the limiting reactant, it will be completely consumed, and any excess O2 will remain unreacted.

Learn more about stoichiometric ratio here:

https://brainly.com/question/6907332

#SPJ11

use the following data to determine the normal boiling point, in k, of mercury. hg(l) δh o f = 0 (by definition) s o = 77.4 j/k·mol hg(g) δh o f = 60.78 kj/mol s o = 174.7 j/k·mol

Answers

The normal boiling point of mercury is approximately 348.3 K.

What is the normal boiling point, in K, of mercury based on its enthalpy of formation and entropy values in the liquid and gas phases?

To determine the normal boiling point of mercury (Hg), we need to compare the enthalpy of formation (ΔHof) and entropy (S) values between the liquid (Hg(l)) and gas (Hg(g)) phases.

Hg(l): ΔHof = 0 (by definition), S = 77.4 J/Kamal

Hg(g): ΔHof = 60.78 kJ/mole, S = 174.7 J/Kamal

The normal boiling point is the temperature at which the liquid phase and gas phase of a substance are in equilibrium, and the Gibbs free energy change (ΔG) is zero. The equation for ΔG is:

ΔG = ΔH - TΔS

At the boiling point, ΔG = 0, so we can set up the equation as follows:

0 = ΔH - TΔS

Rearranging the equation to solve for temperature (T):

T = ΔH / ΔS

Substituting the given values:

T = (60.78 kJ/mold) / (174.7 J/Kamal)

Converting kJ to J:

T = (60.78 * 10^3 J/mold) / (174.7 J/Kamal)

Simplifying:

T ≈ 348.3 K

Therefore, the normal boiling point of mercury is approximately 348.3 K.

By using the relationship between enthalpy, entropy, and temperature through the Gibbs free energy equation, we can determine the boiling point of mercury.

The normal boiling point occurs when the Gibbs free energy change is zero, indicating equilibrium between the liquid and gas phases. By substituting the given enthalpy and entropy values, we can calculate the temperature at which this equilibrium is achieved, giving us the normal boiling point of mercury.

Learn more about  mercury is approximately

brainly.com/question/29128612

#SPJ11

How many molecules of oxygen are required to burn 55.25 liters of ethane gas c2h6 at stp?

Answers

Approximately 5.05 x 10²⁴ molecules of oxygen are required to burn 55.25 liters of ethane gas at STP.

The balanced chemical equation for the combustion of ethane (C₂H₆) with oxygen (O₂) is:

C₂H₆ + 3.5O₂ → 2CO₂ + 3H₂O

From the equation, we can see that 3.5 moles of oxygen are required to burn 1 mole of ethane completely. Therefore, to calculate the number of molecules of oxygen required to burn 55.25 liters of ethane gas at STP, we need to convert the volume of ethane gas to the number of moles using the ideal gas law.

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

At STP, the pressure (P) is 1 atm, the temperature (T) is 273 K, and the gas constant (R) is 0.08206 L atm mol⁻¹ K⁻¹.

Therefore, the number of moles of ethane in 55.25 liters can be calculated as:

n = (PV)/(RT) = (1 atm x 55.25 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 273 K) ≈ 2.40 moles

To burn 2.40 moles of ethane completely, we need 2.40 x 3.5 = 8.40 moles of oxygen.

Finally, the number of molecules of oxygen required can be calculated using Avogadro's number (6.022 x 10²³ molecules/mol):

8.40 moles x 6.022 x 10²³ molecules/mol ≈ 5.05 x 10²⁴ molecules of oxygen

learn more about Ideal gas law here:

https://brainly.com/question/28257995

#SPJ11

The solubility of carbon dioxide in water is very low in air (1.05x10^-5 M at 25 degrees C) because the partial pressure of carbon dioxide in air is only 0.00030 atm. What pressure of carbon dioxide is needed to dissolve 100.0 mg of carbon dioxide in 1.00 L of water?a. 0.0649 atmb. 2.86 atmc. 28.6 atmd. 64.9 atm.

Answers

The pressure of carbon dioxide is needed to dissolve 100.0 mg of carbon dioxide in 1.00 L of water option (a) 0.0649 atm.

We can solve this problem using Henry's Law, which states that the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. Mathematically, this can be expressed as:

C = k * P

where C is the concentration of the gas in the liquid, P is the partial pressure of the gas above the liquid, and k is the proportionality constant known as Henry's Law constant.

To find the partial pressure of carbon dioxide needed to dissolve 100.0 mg of carbon dioxide in 1.00 L of water, we first need to convert the mass of carbon dioxide to moles:

100.0 mg / (44.01 g/mol) = 0.00227 mol

The concentration of carbon dioxide in the water is then:

C = 0.00227 mol / 1.00 L = 0.00227 M

The  pressure of carbon dioxide is needed to dissolve 100.0 mg of carbon dioxide in 1.00 L of water is

Next, we can use Henry's Law to find the partial pressure of carbon dioxide:

P = C / k

The Henry's Law constant for carbon dioxide in water at 25 degrees C is 3.4 x [tex]10^{(-2)[/tex]M/atm.

P = (0.00227 M) / (3.4 x [tex]10^{(-2)[/tex] M/atm) = 0.0668 atm

Therefore, the answer is closest to option (a) 0.0649 atm.

Know more about  pressure   here:

https://brainly.com/question/24719118

#SPJ11

Manganese reacts with hydrochloric acid to produce manganese(II) chloride and hydrogen gas. Mn(s) + 2 HCl(aq) + MnCl, (aq) + H (9) When 0.620 g Mn is combined with enough hydrochloric acid to make 100.0 mL of solution in a coffee-cup calorimeter, all of the Mn reacts, raising the temperature of the solution from 23.5°C to 28.6 °C. Find AHxn for the reaction as written. (Assume that the specific heat capacity of the solution is 4.18 J/g °C and the density is 1.00 g/mL.) -189 kJ 0 -3.44 kJ 0 -1.17 kJ O -2.13 kJ

Answers

The specific heat capacity of the solution is 4.18 j/g°C , the reaction for the ΔH will be - 194 kj /mol Mn .

The quantity of heat absorbed per unit mass (kg) of the material when its temperature rises by 1 K (or 1 °C) is referred to as the specific heat capacity, and its units are either J/(kg K) or J/(kg °C). The particular intensity of a substance is characterizes as need might have arisen to build the temperature of one gram of the substance by one degree Celsius. This value, which is the same for every substance, can be used to describe a substance's capacity to absorb heat.

                 Mass of Mn = 0.625 g

volume of given solution = 100 ml

initial temperature = 23.5°C

final temperature = 28.8° C

Density = 1 g/mL

heat capacity of the solution = 4.18 J/g° C

Calculate temperature change = ΔT = T₂ - T₁

Substituting the values in given equation :

                        ΔT = 28.8 -23.5

                          = 5.3 °C

Calculate heat of absorbed by solution =

 q solution = m solution  ×Cs×ΔT

                  substituting the the values in the formula :

                  q solution = - 100 × 4.18 × 5.3

                                     = - 2.21 × 10 ³j

calculate the Δ H reaction =

                 ΔH = q solution / mol Mn

 = - 2.22 × 10 ³ / 0.625 × 1 / 54.94

                           = - 194 kj /mol Mn .

How significant is specific heat?

The heat capacity, also known as specific heat, is the quantity of heat needed to raise the temperature by one degree Celsius per unit of mass. Specific heat can be used to distinguish between two polymeric composites and help determine the processing temperatures and amount of heat required for processing.

Learn more about specific heat :

brainly.com/question/29792498

#SPJ4

What is salt
Types of salt

Answers

Answer:

Explanation:

Salt is a mineral substance composed primarily of sodium chloride (NaCl). It is commonly used in cooking, food preservation, and as a seasoning. There are several types of salt, including:

Table salt: This is the most common type of salt, which is refined and processed to remove impurities. It is typically iodized to prevent iodine deficiency.

Sea salt: This is made by evaporating seawater and contains trace minerals, giving it a slightly different taste than table salt.

Himalayan salt: This is a type of rock salt that is mined from the Himalayan Mountains. It is known for its pink color and contains trace minerals.

Kosher salt: This is a coarse-grained salt that is commonly used in kosher cooking. It has a larger crystal size than table salt and is less dense.

Pickling salt: This is a fine-grained salt that is used for pickling and canning. It does not contain any additives like iodine or anti-caking agents.

The Haber process generates ammonia from nitrogen and


hydrogen gas through the following chemical equation.


N2 + 3H2 + 2NH3


Which is the excess reagent in the Haber reaction if equal


moles of Hydrogen and Nitrogen are used?

Answers

In the Haber process with equal moles of hydrogen and nitrogen, hydrogen is the limiting reagent, and nitrogen is the excess reagent.

In the Haber process, which is used to produce ammonia (NH3), nitrogen gas (N2) and hydrogen gas (H2) react according to the following chemical equation: N2 + 3H2 → 2NH3. To determine the excess reagent in the reaction, we need to compare the stoichiometry of the reactants. The balanced equation shows that for every 1 mole of nitrogen, 3 moles of hydrogen are required. However, if equal moles of hydrogen and nitrogen are used, it means that the ratio of nitrogen to hydrogen.

Since the ratio of nitrogen to hydrogen is not in the stoichiometric ratio, one of the reactants will be present in excess, and the other will be the limiting reagent. In this case, the excess reagent will be the one that is not fully consumed in the reaction, while the limiting reagent is the one that determines the maximum amount of product that can be formed.

In this scenario, if equal moles of hydrogen and nitrogen are used, the nitrogen gas will be in excess. This is because the stoichiometry of the balanced equation indicates that 3 moles of hydrogen are required for every mole of nitrogen. Since we are using equal moles of hydrogen and nitrogen, the nitrogen gas will not be fully consumed, and some of it will remain unreacted.

Learn more about moles of hydrogen here

https://brainly.com/question/1458306

#SPJ11

Methane (ch4) burns in oxygen to produce carbon dioxide and water vapor. Whay is the number of co2 molecules produced when 3. 2L of oxygen are consumed? CH2+2O2-CO2+2H2O solution

Answers

Burning 3.2L of oxygen with methane produces 2 molecules of carbon dioxide.

The balanced chemical equation for the combustion reaction of methane with oxygen is CH4 + 2O2 → CO2 + 2H2O. From the equation, we can see that every one molecule of methane reacts with two molecules of oxygen to produce one molecule of carbon dioxide and two molecules of water.

Therefore, to determine the number of carbon dioxide molecules produced when 3.2L of oxygen is consumed, we need to first calculate how many molecules of methane were used.

Since the volume of oxygen is given, we can use the ideal gas law PV = nRT to calculate the number of moles of oxygen present in 3.2L at room temperature and pressure (RTP).

Using the molar ratio from the balanced equation, we can then calculate the number of moles of methane required to react with this amount of oxygen.

Finally, we can use the stoichiometry from the equation to determine the number of moles of carbon dioxide produced. Converting the result to number of molecules gives us 2 molecules of carbon dioxide, as indicated in the summary above.

Learn more about molecules here.

https://brainly.com/questions/32298217

#SPJ11

In aqueous solutions at 25°C, the sum of the hydroxide ion and hydronium ion concentrations (H30+) |+ [OH-]) equals 1 x 10-14 O True False

Answers

The statement "In aqueous solutions at 25°C, the sum of the hydroxide ion and hydronium ion concentrations ([H₃O⁺] + [OH⁻]) equals 1 x 10⁻¹⁴" is actually false because it is their ionic product that equals 1 x 10⁻¹⁴  which is a constant known as the ion product constant of water ([tex]K_{w}[/tex]).

The ion product constant of water ([tex]K_{w}[/tex]) is defined as the product of the concentrations of the hydronium and hydroxide ions in a solution at a given temperature.

At 25°C, the value of Kw is 1 x 10⁻¹⁴, which means that in any aqueous solution, the product of the hydronium and hydroxide ion concentrations will always be equal to 1 x 10⁻¹⁴.

Mathematically, it is expressed as:

[tex]K_{w}[/tex] = [H₃O⁺] × [OH⁻] = 1 x 10⁻¹⁴

This relationship is important in understanding the concept of pH, which is a measure of the acidity or basicity of a solution.

When the hydronium ion concentration is higher than the hydroxide ion concentration, the solution is acidic, and the pH value will be less than 7. On the other hand, when the hydroxide ion concentration is higher than the hydronium ion concentration, the solution is basic, and the pH value will be greater than 7. When the two concentrations are equal, the solution is neutral, and the pH value is 7.

Therefore, the product of the hydroxide and hydronium ion concentrations equals 1 x 10⁻¹⁴, not the sum. The relationship between these concentrations determines the acidity or alkalinity of a solution, which is quantified by the pH and pOH scales.

In summary, the statement is false because the product, not the sum, of the hydroxide ion and hydronium ion concentrations equals 1 x 10⁻¹⁴ at 25°C in aqueous solutions.

To know more about the ion product constant of water, refer here:

https://brainly.com/question/8794778#

#SPJ11

Determine the number of KNO3 molecules in 0. 750 mol of KNO3

Answers

There are approximately 4.517 × 10^23 KNO3 molecules in 0.750 mol of KNO3.

To determine the number of KNO3 molecules in 0.750 mol of KNO3, we can use Avogadro’s number and the concept of moles-to-molecules conversion. Avogadro’s number states that there are approximately 6.022 × 10^23 entities (atoms, molecules, or formula units) in one mole of a substance. Therefore, one mole of KNO3 contains approximately 6.022 × 10^23 KNO3 molecules.

Given that we have 0.750 mol of KNO3, we can multiply this value by Avogadro’s number to find the number of molecules:

Number of KNO3 molecules = 0.750 mol × (6.022 × 10^23 molecules/mol)

Number of KNO3 molecules ≈ 4.517 × 10^23 molecules

In summary, the calculation involves multiplying the given amount of substance in moles by Avogadro’s number to obtain the number of molecules. In this case, 0.750 mol of KNO3 corresponds to approximately 4.517 × 10^23 KNO3 molecules.

Learn more about  Avogadro’s number here:

https://brainly.com/question/28812626

#SPJ11

explain why glacial acetic acid is not a conductor, but aqueous acetic acid is. why is the water necessary for conductivity?

Answers

Glacial acetic acid, also known as concentrated acetic acid, is not a conductor because it does not contain any free ions or charged particles that can move and carry an electric charge.

In contrast, aqueous acetic acid is a conductor because it is dissolved in water, which is a polar solvent that can dissociate the acetic acid molecules into ions. In other words, when acetic acid dissolves in water, it breaks apart into positively charged hydrogen ions (H+) and negatively charged acetate ions (CH₃COO-), which can move and conduct electricity. Therefore, water is necessary for conductivity because it allows the acetic acid molecules to dissociate into ions and form a solution that can conduct an electric current.

Conduction is the transfer of heat energy between nearby atoms or molecules. Due to the tighter particle spacing in solids and liquids compared to gases, conduction happens more easily in these two phases.

Conduction is the process through which heat is transferred from an object's hotter end to its cooler end. The word "thermal conductivity" describes an object's ability to transport heat, and it is symbolised by the letter "k."

Learn more about Conduction  here

https://brainly.com/question/31201773

#SPJ11

q13. briefly describe how can you isolate pure benzophenone from a mixture containing benzoic acid and benzophenone?

Answers

Overall, the process involves separating the benzoic acid from the mixture and then purifying the benzophenone using various extraction and purification methods. It is important to carefully monitor each step of the process to ensure a pure final product.

To isolate pure benzophenone from a mixture containing benzoic acid and benzophenone, a series of steps need to be followed. This process can be quite complex, so I will provide a long answer to ensure all necessary information is included.

1. Dissolve the mixture containing benzoic acid and benzophenone in a suitable organic solvent such as ethyl acetate.
2. Add a basic solution of sodium hydroxide to the mixture to convert the benzoic acid to its sodium salt, which will become water-soluble and can be separated from the benzophenone.
3. Extract the benzophenone from the organic layer using a suitable method such as liquid-liquid extraction or column chromatography. This will separate the benzophenone from other impurities in the mixture.
4. After extraction, the solvent must be evaporated to obtain a solid or concentrated solution of benzophenone.
5. Further purification can be done using techniques such as recrystallization or sublimation to obtain pure benzophenone.

To know more about  benzoic acid visit:-

https://brainly.com/question/24052816

#SPJ11

when determining the concentration of Fe2+ ions in a tablet using a redox titration, what other factors might influence the reduction and oxidation reactions taking place?

Answers

Several factors can influence the reduction and oxidation reactions taking place in a redox titration for determining the concentration of Fe²⁺ ions in a tablet. These factors include the presence of impurities, temperature, pH of the solution, reaction time, and the choice of titrant and indicator.

1. pH: The pH of the solution can affect the redox reactions. Certain pH conditions might favor or hinder the oxidation or reduction of Fe²⁺ ions.

2. Temperature: The temperature can impact the reaction rate of the redox process. Higher temperatures typically increase the rate of reaction, while lower temperatures can slow it down.

3. Presence of other substances: The presence of other substances in the tablet or solution can interfere with the redox reaction. It is essential to ensure that no interfering substances are present or to account for their effects through appropriate techniques.

4. Catalysts: The presence of catalysts can enhance the redox reaction, increasing its rate or efficiency. Catalysts provide an alternate reaction pathway with lower activation energy.

5. Choice of oxidizing/reducing agent: The selection of the oxidizing or reducing agent used in the titration can affect the reaction. The reactivity and selectivity of the chosen reagent can influence the accuracy and precision of the results.

It is crucial to consider and control these factors to ensure accurate and reliable determination of the concentration of Fe²⁺ ions during the redox titration.

To know more about the redox titration refer here :

https://brainly.com/question/30996928#

#SPJ11




A single serving of snack has 180 Calories (kilocalories). How many Joules of energy are in 1 serving of the snack? ( 1 cal = 4. 184J)

Answers

There are 753.12 Joules of energy in one serving of the snack. This means that when we eat this snack, our body will be able to use 753.12 joules of energy from the food.

Given, Calories = 180 Cal( 1 cal = 4. 184J)

We know, 1 calorie (cal) is equivalent to 4.184 Joules (J)

1 Calorie = 4.184 Joules (J)

Thus, 180 Cal (calories) = 180 × 4.184 J = 753.12 J

To find the number of joules of energy in one serving of the snack, we need to convert the given calories to joules because calories and joules are different units of energy. We use the following conversion factor: 1 calorie (cal) = 4.184 joules (J).

Therefore, we have to multiply the given calorie value by 4.184 to get the equivalent amount in joules. In this case, we are given that a single serving of the snack contains 180 calories.

To find the energy in joules, we use the formula:

E(J) = n(cal) x 4.184 (where E is energy in joules, n is the number of calories and 4.184 is the conversion factor).

Substituting the given values, we have:

E(J) = 180(cal) x 4.184

= 753.12 J

So, one serving of the snack has an energy of 753.12 joules (J).

To learn more about energy, refer:-

https://brainly.com/question/8630757

#SPJ11

Other Questions
What is the main advantage of "thermal spraying" (molten particle deposition) compared to "hard facing" (weld overlay) for surface treatment of a metal? Select one: O a. No heat-affected zone O b. Shinier surface O c. Lower cost O d. Higher cost e. Lower weight Of the following locations, hurricanes and tropical storms are least likely to impact A. New England B. North Carolina.C. California D. Louisiana Which inequality represent the following situation? The captain must have a minimum of 120 hours of flying experience A. H_>120 B. H 120 which key practice for language intervention involves providing additional language intervention time during the school day or by adding language intervention after school or during the summer? The medium in which a donor organ for transplant in bathed in an isotonic medium (a solution of the same concentration as the cell cytoplasm). Why? the keynesian zone of the aggregate supply curve is ________ while the neoclassical portion is ________.a.horizontal; vertysal b.upward-sloping, downward-sloping c.vertical; flat Find the value of X A. .07B. 90C. 10.6D. 15 if investment is zero, the capital stock a. remains constant. b. grows steadily. c. continues to flow. d. falls to zero. A positive charge 1.1X10^-11 C is located 10^-2 m away from a negative charge of the same magnitude. Point P is exactly half way between them --what is the E field at point P? Complete the following function so that it swaps the first and last element of the given vector. Do nothing if the vector is empty.Complete the following file:strings.cpp1 #include 2 #include 3 using namespace std;4 void swapEnds (vector& names)6 {7 ...8 }SubmitUse the following file:Tester.cpp#include #include #include using namespace std;#include "util.h"int main() {vector a = {"Peter", "Paul", "Mary"}; cout A regulation National Hockey League ice rink has perimeter 570 ft. The length of the rink is 30 ft longer than twice the width. What are the dimensions of an NHL ice rink? Successful residential treatment programs for juveniles are those that do which of the following?a. Support mental health issues rather than focusing on punishment.b. Provide aggression replacement training such as anger control.c. Focus on specific skills such as behavior management or family counseling.d. All of the above. e. None of the above. Arrange the steps in correct order to solve the congruence 2x= (mod 17) using the inverse of 2 modulo 17, which is 9 Rank the options below: 9 is an inverse of 2 modulo 17. The given equation is Zx = 7 (mod 17)_ Multiplying both sides of the equation by 9, we get x= 9 7 (mod 17)_ Since 63 mod 17 = 12,the solutions are all integers congruent to 12 modulo 17, such as 12,29,and-5. Anxiety and stress reduction is an important element in substance abuse prevention because __________.A. peer-refusal skills are often overly developedB. adolescents often have inadequate coping skills to deal with anxietyC. it is important that adolescents understand federal and state penaltiesD. personal decision making is enhanced as a result Under Article 9 of the UCC, which of the following could not be used as collateral?A: a carB: a houseC: a fixtureD: cash committing human, technical, and financial resources to one locale may mean doing which of the following to other projects? a solution has [h3o ][h3o ] = 3.0105 mm . use the ion product constant of water kw=[h3o ][oh]kw=[h3o ][oh] to find the [oh][oh] of the solution. The exponential model A=433.4e^0.032t describes the population, A, of a country in millions, t years after 2003. Use the model to determine when the population of the country will be 796 million.The population of the country will be 796 million in (Round to the nearest year as needed.) (20)The role of women in society is gradually taking its rightful place not only in urban areas but in rural areas as well. Women in Africa have always assumed an important role in villages and communities. They have been in the forefront of food security, bio-diversity and various other aspects of the household. In apartheid South Africa for example, women lived without their men who were migrant workers in the mines. In the absence of the men the women became managers of their households. In this chapter we explore why theeducation leadership curriculum should explore deeper as to why the role of women in African societies can enhance organisations. The curriculum in many programmes teaches management and leadership by merely looking at male modes of leadership. Yet, femininity and the role of women have much to teach students of management and leadership. African history has given us accounts of great women leaders who led with distinction, for example, MaNthantisi during the rise of the Zulu kingdom. Then there was the Ghanaian Queen Mother Yaa Asantwa who led and protected her chiefdom against British Colonialists. The Empress Uelete Rutael from Ethiopia was also a strong leader in her own right. There are various other examples that show that women in Africa have the ability to lead with distinction. However, many have argued that due to their biology women cannot be good leaders. Yet the African Women Leaders website declares: Another excuse used against the participation of women in leadership is the fact that they are usually sensitive and emotional and as such would not be able to perform to the best of their ability in stressful situations. True, women are usually very emotional. But does this necessarily have to be a bad thing? The empathy that women feel for people and situations make them better able to understand the people they are leading. the chapter explore some of these debate, for it is unthinkable ignore these expects of womanhood in leadership. women in Africa have had various role that show them enhancing their communities. :Identify what the chapter seek to explore? express x=ln(8t), y=10t in the form y=f(x) by eliminating the parameter.