Answer:
the answer is A)Oceans
Explanation:
How did John Newlands order the elements?
Hello friend! Hopefully this helps you as much as needed!
An English scientist called John Newlands put forward his Law of Octaves in 1864. He arranged all the elements known at the time into a table in order of relative atomic mass. He then put the similar elements into vertical columns, known as groups.
The
force acting on an object is the combination of
all of the individual forces acting on it.
Check it
2 SCRATCHPAD
~ Improve this questio
Answer:
Yes as you can improve The invisible to human eye force or physical force if any being applied to a object of any mass and with all individual forces as they are acting on this object
Explanation:
Gamma
ray
Which has the longest wavelength?
Ultra-
violet Infrared
Radio
Which has the highest frequency?
X-rays Visible
Microwave
WWW
Answer:
Radio waves
X-rays Visible
Explanation:
The wavelength of a wave is the difference between successive crests on a wave line. Waves with a very high wavelength have low energy.
Frequency is the number of waves that pass a point per unit of time. The higher the frequency, the higher a wave's energy.
From the given spectrum, wavelength increases from left to right. This puts radio waves as the wave with the longest wavelength. It is also right to say, it has the least energy. Also, frequency decrease from left to right. Gamma rays have the highest frequency in the spectrum. This is followed by x-rays.Answer:
Radio waves
X-rays Visible
Explanation:
What is the mass obtained of Ag from the reaction of 3 moles of AgCl
Given= Zn + 2AgCl —> ZnCl2 + 2Ag
Answer:
323.7g
Explanation:
Given parameters:
Number of moles of AgCl = 3 moles
Unknown:
Mass of Ag = ?
Solution:
We solve this problem by working from the known to the unknown;
The known here is AgCl;
From the balanced equation:
Zn + 2AgCl → ZnCl₂ + 2Ag
2 moles of AgCl will produce 2 moles of Ag
3 moles of AgCl will produce 3 moles of Ag
The mass of Ag will be;
Mass of Ag = number of moles x molar mass
Molar mass of Ag = 107.9g/mol
Mass of Ag = 3 x 107.9 = 323.7g
A student compared some chemical and physical properties of three pure substances. Her
data are recorded in the chart above. What is a logical conclusion the student can draw
about hare substances?
Pure substances have the same chemical and physical properties.
Pure substances have the same chemical properties, but different physical properties.
O Pure substances have the different chemical properties, but the same physical properties.
O Pure substances have different chemical and physical properties.
Answer:
letter b not c
Explanation:
next time please take a picture lucky i already took this
The first column of the periodic table is called the
explanation of atomic radius
Ah yes.
The atomic radius is basically the distance between the nucleus of the atom and the outermost electron in the farthest orbital of the atom. The more bigger the atomic radius , the less powerful is the force that holds together the nucleus and its electrons.
why people on earth cannot see the entire shape of the milky way
Answer:
Explanation:
That is because the Milkyway is full of dust and gas, you cannot really see something if it has dust and gas
Answer:
Its too far away to see
Explanation:
You would probably have to be in space
What do we call the bond that forms when atoms share two pairs of electrons
(I have a test tomorrow and I'm doing a review right now but have no idea what the answer to this is.)
Convert 122 moles of Methane to liters?
During evaporation, what causes certain liquid molecules to become vapor molecules? A. Decreased fluidity A. Increased viscosity A. Decreased kinetic energy A. Increased kinetic energy.
Answer:
The answer is A. Decreased Fluidity
Explanation:
Taking the test on preformance matters
In evaporation, particles of liquids take energy in the form of sunlight from the surrounding and then convert into vapor phase. Increased kinetic energy causes certain liquid molecules to become vapor molecules.
What is evaporation?Evaporation is a physical process in which the water in liquid state converts to gaseous state at the temperature below its boiling point. Evaporation happens before the boiling process.
Evaporation causes cooling effect in the surrounding. During summer when water is kept in earthen pot water cools, this is because of the evaporation process.
Evaporation is affected by temperature. As the temperature increases, kinetic energy of liquid molecules also increases and hence the rate of evaporation increases.
Therefore, increased kinetic energy causes certain liquid molecules to become vapor molecules.
To know more about evaporation, here:
https://brainly.com/question/8169606
#SPJ2
Requires a medium to travel (travel fastest through solid-like metal train tracks A Waves B Sound Waves C Light Waves D matter
Answer:
b
Explanation:
becuase of sound waves
Which best explains the formation of polyester?
a condensation polymerization of a carboxylic acid and an alcohol
an addition polymerization of a carboxylic acid and an alcohol
a condensation polymerization of two alcohols
an addition polymerization of two alcohols
Answer:
The correct answer is - a condensation polymerization of a carboxylic acid and an alcohol
Explanation:
Condensation polymerization is a type of polymerization that forms a byproduct by the bonding of two different types of monomers during polymerization.
Polyester is an example of condensation polymerization which is formed by the polymerization of carboxylic acid and an alcohol monomer. In addition polymerization, there is only one type of monomers bond together.
Answer:
A. a condensation polymerization of a carboxylic acid and an alcohol
Explanation:
Which types of matter are made of atoms
a. Mixtures
b. Elements
C. Compounds
D. All of the above
Answer:
D all above yes I think it's all above
Answer: D
Explanation: All of the above.
Plz mark brainliest:)
A student combines two clear liquid chemicals together in a beaker. When the two chemicals are combined, bubbles are formed, the solution turns blue, and you can see flakes of something forming on the bottom of the beaker. Is this a physical or chemical change? Why?
Answer:
chemical change
Explanation:
A physical change is one that makes changes to the physical properties of matter. In many cases, the difference is usually reversible. Examples include boiling, melting, freezing, the magnetization of metals, etc.
A chemical change is one in which a new kind of matter is formed. It is usually accompanied by energy changes, i.e., the evolution or absorption of energy in the form of heat or light. This process is not easily reversible. Examples include; combustion, rusting of iron, precipitation, the souring of milk, etc.
From the question given, the combination of two clear liquid in a beaker which results to formation of bubbles and changes in coloration of the solution is a chemical change.
1. Calculate the average atomic mass of iron if its abundance in nature is 15%-iron-55 and
85% iron-56
The average atomic mass of iron : 55.85 amu
Further explanationThe elements in nature have several types of isotopes
Isotopes are atoms whose no-atom has the same number of protons while still having a different number of neutrons.
An atomic mass unit = amu is a relative atomic mass of 1/12 the mass of an atom of carbon-12.
The 'amu' unit has now been replaced with a unit of 'u' only
Atomic mass is the average atomic mass of all its isotopes
atomic mass X = mass isotope 1 . % + mass isotope 2.% ...
The average atomic mass of iron
[tex]\tt =0.15\times 55+0.85\times 56\\\\=\boxed{\bold{55.85~amu}}[/tex]
The average atomic mass of iron : 55.85 amu
Calculation for average atomic mass:Isotopes are atoms whose atoms have the same number of protons while still having a different number of neutrons.
An atomic mass unit = amu is a relative atomic mass of 1/12 the mass of an atom of carbon-12.
The 'amu' unit has now been replaced with a unit of 'u' only
Atomic mass is the average atomic mass of all its isotopes.
Atomic mass X = mass isotope 1 * Mas % + mass isotope 2* Mass %
The average atomic mass of iron:
=0.15 * 55 + 0.85 * 56
=55.85 amu
Thus, the average atomic mass of iron : 55.85 amu
Find more information about Average atomic mass here:
brainly.com/question/338808
What is the purpose of the title of a line graph
Answer:
It tells about the data for each line graph is plotted.
Explanation:
Answer:
It can describe what the line graph is measuring and how it is measuring it
Which of the following is NOT an example of a chemical change? *
O Corrosion
O Grinding
O Combustion
O Rust
Answer question number 4
Answer: Choice A
Explanation:
Which description applies to a physical property? Choose the correct answer
O depends directly on the amount of the substance present
O examines changes in the composition and structure of matter
O measured or observed without changing the identity and composition of matter
O determined by changing the identity of a substance and observing how it reacts
Answer:
the third one, measured or observed without changing the identity and composition of matter. because physical property does not under go any change but can be put back.
compound name of SO2
what is the main function of this organelle in the cell?
Answer:
[tex]to \: use \: energy \: from \\ \: sunlight \: to \: make \: sugars.[/tex]
Explanation:
[tex]the \: main \: function \: of \: this \: organelle \\ \: in \: the \: cell \: is \: to \: use \: energy \: from \\ \: sunlight \: to \: make \: sugars.[/tex]
A cube of metal has a mass of 5.05 x 10°g and its density is known to be 12.77 g/mL, what is the volume of this metal?
A 395.5 mL
B. 2.529 mL
C. 63,910 mL
D. 64.48 ml
Answer:
Explanation:
option A is correct
What purpose do neutrons serve in the nucleus ? What happens if there are too many or too few neutrons?
Answer:
These nuclei with different numbers of neurons are called isotopes
Answer:
neutrons' main function is to attract each other and keep the nucleus of an atom intact. a nucleus will become unstable if there are too many or too few neutrons in it.
Explanation:
too many= it will undergo beta decay (the neutrons will changes into proton)
too few= there will be an imbalance between forces which leads to nuclear imbalance
A student states that photosynthesis is conducted only in plant cells and that cellular respiration occurs only in animal cells. Tell whether the student is correct and why. In your response, be sure to describe both processes and the structures involved. Upload your answer below.
Answer:
This is correct
Explanation:
This is correct because for photosynthesis you need organelles such as chloroplasts, chloroplasts absorb light energy and convert it into usable energy for plants. Animal cells do not have chloroplasts/similar organelles so they can't absorb energy from the sun, Animal cells use mitochondria which takes energy from our food and breaks it down into usable energy(such as ATP) to be transported.
Help ASAP plzzzz!!!!!!!!
Answer:
Granite Solid
Milk Liquid
Neon is gas
Wood Is solid
Paper is solid
Helium is Gas
Water is liquid
Air is Gas
Alcohol is liquid
Metal is solid
Nitrogen is gas
Juice is liquid
Oil is liquid
Water Vapor is Gas
Brick is Solid
Propane is Gas
Fabric is solid
Gasoline is Liquid
Explanation:
Hope Dis helped :D :3
What do eukaryotic cells, prokaryotic cells and viruses all have in common?
Answer:
Like a prokaryotic cell, a eukaryotic cell has a plasma membrane, cytoplasm, and ribosomes, but a eukaryotic cell is typically larger than a prokaryotic cell, has a true nucleus (meaning its DNA is surrounded by a membrane), and has other membrane-bound organelles that allow for compartmentalization of functions.
Explanation:
is this okay???
How do the gravitational forces change as the objects get closer to each other?
Answer:
you can use the example of two magnets
Answer: The gravitational force Increase as the objects get closer.
Explanation:
i dont get what it means by of touch
Answer:
So I don't know what do you mean by that, please be a little specific.
Explanation:
^^
2. Why do you think it matters how close or how far an object is from the Sun to
sustain life on that object's surface?
PLEASE HELP ASAP
Answer:
In Copernicus's heliocentric model the planets orbit in circles around the sun. One may wonder how Copernicus determined the order of the planets and the size of their orbits – after all, he had no benefit of pictures from spacecraft or even a telescope.
Explanation: