Which set of ordered pairs does not represent a function?

1. {(6,5), (3, 5), (−2, 8), (-9,4)}

2. {(-6, -1), (3, 1), (4, −4), (8, 1)}

3. {(-1,9), (-8, 5), (-1, 3), (-9, 1)}

4. {(5,9), (2,-5), (-1,-5), (0, 1)}

Answer:

g

Step-by-step explanation:

The given expression is arcsin (-√3/2), which represents the angle whose sine is equal to -√3/2. Recall that the range of the arcsin function is from -π/2 to π/2 radians, so we can narrow down the possible solutions to the second and third quadrants.

Since the sine function is negative in the third quadrant, we can start by considering the angle 4π/3, which is in the third quadrant and has a sine of -√3/2:sin(4π/3) = -√3/2

However, we need to check if there are any other angles in the second or third quadrants that satisfy the equation. Recall that sine is periodic with a period of 2π, so we can add or subtract any multiple of 2π to the angle and still obtain the same sine value.

In the second quadrant, we can use the reference angle π/3 to find the corresponding angle with a negative sine:

sin(π - π/3) = sin(2π/3) = √3/2

This angle does not satisfy the equation, so we can eliminate it as a possible solution.In the third quadrant, we can use the reference angle π/3 to find another possible solution:

sin(π + π/3) = sin(4π/3) = -√3/2

This confirms our initial solution of 4π/3, so the answer is (g) 4π/3.

Let me know if this helped by hitting brainliest! If you have a question, please comment and I"ll get back to you ASAP!

Answer:

We know that sin(π/3) = √3/2, so we can write:

arcsin(-√3/2) = -π/3 + 2nπ or π + π/3 + 2nπ

where n is an integer.

Therefore, the values of arcsin(-√3/2) are:

a. π/3 + 2nπ

c. 11π/6 + 2nπ

e. 2π/3 + 2nπ

f. 7π/6 + 2nπ

So, options a, c, e, and f are all correct.

The value of local maximum and local minimum for the function f(x) = x^2/(x -1 ) is equal to f(0) = 0 at x = 0 and f(2) = 4 at x = 4 respectively.

Local maximum and minimum values of the function

f(x) = x^2 / (x - 1),

Use both the first and second derivative tests.

First, let's find the critical points of the function,

By setting its derivative equal to zero and solving for x,

f'(x) = [2x(x - 1) - x^2] / (x - 1)^2

⇒ [2x(x - 1) - x^2] / (x - 1)^2 = 0

Simplifying this expression, we get,

x(x - 2) = 0

This gives us two critical points,

x = 0 and x = 2.

These critical points correspond to local maxima, local minima, or neither.

Use the second derivative test,

f''(x) = [2(x - 1)^2 - 2x(x - 1) + 2x^2] / (x - 1)^3

At x = 0, we have,

f''(0) = 2 / (-1)^3

       = -2

Since the second derivative is negative at x = 0, this critical point corresponds to a local maximum.

f(0) = 0^2/ (0 -1 )

      = 0

At x = 2, we have,

f''(2) = 2 / 1^3

       = 2

Since the second derivative is positive at x = 2, this critical point corresponds to a local minimum.

f(2) = 2^2/ (2 - 1)

     = 4

Therefore, at x = 0, the local maximum value is f(0) = 0, and at x = 2, the local minimum value is f(2) = 4.

Learn more about local maximum here

brainly.com/question/29560144

#SPJ4

Answer:

B

Step-by-step explanation:

5^2 is the small square, 4(3x4x1/2) are the 4 triangles

Answer: The answer would be B.

Step-by-step explanation:

Hello.

First, we know that the smaller square is 5, and to find the area of the big square, we need to square 5 to get the area. We also know that C wouldn't  be a viable option, so, our only remaining choices are A and B. We know that without the smaller square, there are 4 triangles, and the Area of a Triangle is: 1/2*b*h. So, this also takes A out as an option as well. After this, you will have your answer as B; 5^2 + 4(3 * 4 * 1/2)

(Or, you could have found the Area of the Triangles, and realize that neither A, nor C have those options, making B the answer by default.)

Hope this helps, (and maybe brainliest?)

Answer: 13,708 ft

Step-by-step explanation:

To find the difference in elevation between the mountain and the valley, we need to subtract the elevation of the valley from the elevation of the mountain:

13,318 ft (mountain) - (-390 ft) (valley) = 13,318 ft + 390 ft = 13,708 ft

Therefore, the difference in elevation between the mountain and the valley is 13,708 ft.

Answer: The difference is 13,708 ft.

Given that a mountain is 13,318 feet above sea level. So the elevation of the mountain is [tex]= +13,318 \ \text{ft}[/tex].

Given that a valley is 390 feet below sea level.

So the elevation of the valley is [tex]= -390 \ \text{ft}[/tex].

So the difference between them is [tex]= 13,318 - (-390) = 13,318 + 390 = 13,708 \ \text{ft}.[/tex]

Learn more: https://brainly.com/question/20521181

Answer:

$38.08

Step-by-step explanation:

12% of 34.00 as an equation would be [tex]34*0.12[/tex], [tex]34*0.12=4.08[/tex] so we add 4.08 to the total of the lunch already. [tex]34.00+4.08=38.08[/tex]. So the answer is $38.08. Hope this helps :)

Answer:

Step-by-step explanation:

|x-3|=x-3,if x-3≥0,or x≥3

|x-3|=-(x-3),if x-3<0 ,or x<3

The proof that the lines CD and XY are parallel is shown below in paragraghs

Given that

∠CAY ≅ ∠XBD

This means that the angles CAY and XBD are congruent angles

The above means that

By the corresponding angles, we have

∠BXY = ∠AYX

∠ACD = ∠BDC

By the congruent angles above, the following lines are parallel

Line AC and BX

Line AY and BD

Line CD and XY

Hence, the lines CD and XY are parallel

Read more about proofs at

https://brainly.com/question/18286984

#SPJ1

The relationship between AB and BC is given as follows:

AB > BC.

Two angles are defined as supplementary angles when the sum of their measures is of 180º.

The supplementary angles for this problem are given as follows:

By the law of sines, we have that:

AB/sin(110º) = BC/sin(70º).

As sin(110º) > sin(70º), the inequality for this problem is given as follows:

AB > BC.

More can be learned about inequalities at https://brainly.com/question/25275758

#SPJ1

Answer:

AB>BC

Step-by-step explanation:

AI-generated answer

Based on the given information, the relationship between AB and BC depends on the measure of angle ZADB. If mZADB is 110°, we can determine the relationship as follows:

Since triangle ABD and triangle CBD share side AB, the larger the angle ZADB, the longer the side AB will be compared to side BC. Therefore, if mZADB is 110°, we can conclude that AB is greater than BC.

In summary, when mZADB is 110°, the relationship between AB and BC is:

AB > BC.

The given statements are true or false are shown below, about linear system has n variables and m equations, then the augmented matrix has n rows.

First, let's write how A and C look like.

A = [C|b], where b is the constant matrix.

(a) False.

Example

[tex]\left[\begin{array}{ccc}1&0&2\\0&1&3\\\end{array}\right][/tex]

We can see that z = t and so we have infinitely many solutions but there's no row of zeros.

(b) False.

Example

[tex]\left[\begin{array}{cc}1&0&0\1&1&0&0\\\end{array}\right][/tex]

Here; x1 = 1 and x2 = 1 is a unique solution and we have a row of zeros.

(c) True.

In the row-echelon form, the last row is either a row of zeros or a row that contains a leading 1. If the row has a leading 1, then there is a solution. Since we assume there is no solution, then the row must be a row of zeros.

(d) False.

Example

[tex]\left[\begin{array}{cc}1&3\\0&0\end{array}\right][/tex]

Here; x₁ = 1 − 3t and x2 = t. Thus, the system is consistent.

(e) True.

Suppose we have a typical equation in a system

а1x1 + A2X2 + ··· + anxn = b

Now, if b≠0 and x1 = x2 = ··· = x₂ = 0, then the system is Xn inconsistent. But, if b = 0, then we have a solution.

(f) False.

Example

[tex]\left[\begin{array}{cc}1&2&0&0\end{array}\right][/tex]

If a = 0, then it's consistent(infinitely many solutions) but if a 0, then it's inconsistent.

(g) Ture.

Since the rank would be at most 3 and this will lead to a free variable (4 columns in C and the rank is 3, so there is at leat 1 free variable). Thus, the system has more thatn one solution.

(h) True.

Because the rank is the number of leading 1's lying in different rows and A has 3 rows. Thus, the rank ≤ 3.

(i) False.

Because we could have a row of zeros in C and a leading 1 in A. In other words, a31 = a32 = A33 = A34 = 0 and c3 1. This makes the system inconsistent.

(j) True.

If the rank of C = 3, then there will be a free variable and this means the system is consistent.

Learn more about linear system:

https://brainly.com/question/30703986

#SPJ4

Complete question:

In each case either show that the statement is true, or give an example showing it is false. (a) If a linear system has n variables and m equations, then the augmented matrix has n rows. quations • ( *b) A consistent linear system must have infinitely many solutions. . (c) If a row operation is done to a consistent linear system, the resulting system must be consistent. (d) If a series of row operations on a linear system results in an inconsistent system, the original system is inconsistent.

Answer:

The half-life of a substance is the amount of time it takes for half of the initial amount of the substance to decay.

We can use the following formula to calculate the half-life (t1/2) of a substance with a decay rate of r:

t1/2 = (ln 2) / r

where ln 2 is the natural logarithm of 2 (approximately 0.693).

In this case, the decay rate is 2.5% per year, or 0.025 per year. Plugging this into the formula, we get:

t1/2 = (ln 2) / 0.025

t1/2 = 27.73 years (rounded to two decimal places)

Therefore, the half-life of the substance is approximately 27.73 years.

Answer:

9. $18  

10. 68

Step-by-step explanation:

$8 + $2 + $3 + $5= $18

104 - 36= 68

The documentation "Prints all positive odd integers that are less than or equal to max" is the most appropriate documentation for the printNums procedure, as it accurately describes the behavior of the procedure. so, the option C) is correct.

This procedure uses a loop to display all positive odd integers less than or equal to the input parameter max. It starts by initializing a count variable to 1, and then uses a repeat-until loop to display the current value of count and increment it by 2 until count is greater than max.

The documentation provided is concise, clear, and accurately describes what the procedure does, making it easy for users to understand the purpose and behavior of the procedure. So, the correct answer is C).

To know more about procedure:

https://brainly.com/question/30861505

#SPJ4

_____The given question is incomplete, the complete question is given below:

In the following procedure, the parameter max is a positive integer.

PROCEDURE printNums(max)

{

count ← 1

REPEAT UNTIL(count > max)

{

DISPLAY(count)

count ← count + 2

}

}

Which of the following is the most appropriate documentation to appear with the printNums procedure?

a, Prints all positive odd integers that are equal to max.

b, Prints all negative odd integers that are less than or equal to max.

c, Prints all positive odd integers that are less than or equal to max.

d, Prints all negative odd integers that are less than or equal to max.

Answer:

x²

Step-by-step explanation:

[tex]{ \tt{ \frac{ {x}^{ - 3} . {x}^{2} }{ {x}^{ - 3} } }} \\ \\ \dashrightarrow{ \tt{x {}^{( - 3 + 2 - ( - 3))} }} \\ \dashrightarrow{ \tt{ {x}^{( - 3 + 2 + 3)} }} \: \: \: \: \\ \dashrightarrow{ \boxed{ \tt{ \: \: \: \: {x}^{2} \: \: \: \: \: \: }}} \: \: \: \: [/tex]

Answer:

52

Step-by-step explanation:

10.40 TIMES 3

For the standard normal curve, the area to the left of 0.1 is the same as the area to the right of 0.9 is true . So, the correct answer is D.

The standard normal curve is a normal distribution with a mean of 0 and a standard deviation of 1. This curve is often used in statistics to model natural phenomena, and it has many important properties.

Option A is incorrect because the area under the standard normal curve between 0 and 2 is not twice the area between 0 and 1. The area under the curve increases as we move away from the mean, so the area between 0 and 2 will be greater than the area between 0 and 1.

Option B is also incorrect because the area under the standard normal curve between 0 and 2 is not half the area between -2 and 2. The area between -2 and 2 covers more of the curve than the area between 0 and 2, so the area between 0 and 2 will be smaller than half the area between -2 and 2.

Option C is incorrect because the standard normal curve does not have a fixed IQR (interquartile range). The IQR depends on the quartiles of the distribution, which can vary depending on the sample size and the distribution's shape.

Option D is the correct answer because the standard normal curve is symmetric around the mean of 0. This means that the area to the left of any point on the curve is the same as the area to the right of its negative counterpart. Therefore, the area to the left of 0.1 is equal to the area to the right of 0.9.

Therefore, Correct option is D.

To learn more about normal curve click on,

https://brainly.com/question/30143953

#SPJ4

The equation of the tangent line to the graph of the function at x = 7 is:    y = -1/49 x + 50/343, the equation of the normal line to the graph of the function at x = 7 is: y = 49x - (2402/7) and  slope of the tangent line to the graph of y = 5x^3 at the point (2,40) is 60.

a) To find the tangent line to the graph of the function at x = 7, we need to find the slope of the function at that point. We can use the derivative of the function to find the slope:

f(x) = 1/x

f'(x) = -1/x^2

So, at x = 7, the slope of the tangent line is:

m = f'(7) = -1/7^2 = -1/49

To find the equation of the tangent line, we also need a point on the line. We know that the point (7, 1/7) is on the graph of the function, so we can use that as our point. Using the point-slope form of a line, we have:

y - 1/7 = -1/49(x - 7)

Simplifying this equation, we get:

y = -1/49 x + 50/343

So the equation of the tangent line to the graph of the function at x = 7 is:

y = -1/49 x + 50/343

b) To find the normal line to the graph of the function at x = 7, we need to find a line that is perpendicular to the tangent line we found in part (a). The slope of the normal line is the negative reciprocal of the slope of the tangent line:

m(normal) = -1/m(tangent) = -1/(-1/49) = 49

Using the point-slope form of a line again, we can find the equation of the normal line that passes through the point (7, 1/7):

y - 1/7 = 49(x - 7)

Simplifying this equation, we get:

y = 49x - [(2402)/7]

So the equation of the normal line to the graph of the function at x = 7 is:

y = 49x - (2402/7)

Problem 42:

We can use the limit definition of the derivative to find the slope of the tangent line to the graph of y = 5x^3 at the point (2,40).

Using the formula for the derivative:

dy/dx = lim(h→0) [(f(x+h) - f(x))/h]

we can calculate the slope of the tangent line at x = 2.

Plugging in the given function, we get:

[tex]\frac{dy}{dx} = \lim_{h \to 0} [(5(2+h)^3 - 40) / h][/tex]

[tex]= \lim_{h \to 0} [(40 + 60h + 30h^2 + 5h^3 - 40) / h]\\= \lim_{h \to 0} [60 + 30h + 5h^2]\\= 60[/tex]

Therefore, the slope of the tangent line to the graph of y = 5x^3 at the point (2,40) is 60.

Learn more on slope to the tangent line here;

https://brainly.com/question/6353432

#SPJ1

Answer:

0.38

Step-by-step explanation:

There are a total of 38 pescatarians and 35 vegetarians. This is obtained by looking at the column totals for those categories and includes both males and females

There are a total of 190 participants in the survey

P(pescatarian) = 38/190

P(vegetarian) = 35/190

P(pescatarian or vegetarian)

= P(pescatarian)  + P(vegetarian)

= 38/190  + 35/190

= 73/190

= 0.3842

= 0.38 (rounded to hundredths place)

The equation of the line is y = -1/2 + 13/2.

The point is (3, 5).

An equation of line is x + 2y = 5.

To determine the slope intercept form of the equation using the point and line we first determine the slope of the equation from the given line.

Convert the equation of line in slope intercept form.

x + 2y = 5

Subtract x on both side, we get

2y = -x + 5

Divide by 2 on both side, we get

y = -1/2 x + 5

On comparing with y = mx + c, where m is slope, we get

m = -1/2

Now the equation of the line is;

y - y₁ = m(x - x₁)

y - 5 = -1/2(x - 3)

Simplify the bracket

y - 5 = -1/2x + 3/2

Add 5 on both side, we get

y = -1/2x + 3/2 + 5

y = -1/2 + 13/2

To learn mire about slope intercept form link is here

brainly.com/question/29146348

#SPJ4

The complete question is:

Write an equation of the line containing the given point and parallel to the given line. Express your answer in the form y = mx + b.

(3, 5); x + 2y = 5

The equation of the line is ____ . (Type an equation Type your answer in slope intercept form. Use integers or fractions for any numbers in the equation. Simplify your answer)

Answer:

The table given provides the number of male and female students who voted for each party, but it does not give the total number of students in the survey. To find the probability of selecting a student who voted for the Republican party, we need to know the total number of students who participated in the survey.

The total number of students in the survey is:

50 + 75 + 125 + 50 = 300

The number of students who voted for the Republican party is:

75 + 50 = 125

Therefore, the probability of selecting a student who voted for the Republican party is:

125/300 = 0.4167 (rounded to four decimal places)

So, the answer is option D: 125/300

(please mark my answer as brainliest)

Answer:

[tex]\dfrac{4096\pi}{5}\approx 2573.593\; \sf (3\;d.p.)[/tex]

Step-by-step explanation:

The shell method is a calculus technique used to find the volume of a solid revolution by decomposing the solid into cylindrical shells. The volume of each cylindrical shell is the product of the surface area of the cylinder and the thickness of the cylindrical wall. The total volume of the solid is found by integrating the volumes of all the shells over a certain interval.

The volume of the solid formed by revolving a region, R, around a vertical axis, bounded by x = a and x = b, is given by:

[tex]\displaystyle 2\pi \int^b_ar(x)h(x)\;\text{d}x[/tex]

where:

[tex]\hrulefill[/tex]

We want to find the volume of the solid formed by rotating the region bounded by y = 0, y = √x, x = 0 and x = 16 about the y-axis.

As the axis of rotation is the y-axis, r(x) = x.

Therefore, in this case:

[tex]r(x)=x[/tex]

[tex]h(x)=\sqrt{x}[/tex]

[tex]a=0[/tex]

[tex]b=16[/tex]

Set up the integral:

[tex]\displaystyle 2\pi \int^{16}_0x\sqrt{x}\;\text{d}x[/tex]

Rewrite the square root of x as x to the power of 1/2:

[tex]\displaystyle 2\pi \int^{16}_0x \cdot x^{\frac{1}{2}}\;\text{d}x[/tex]

[tex]\textsf{Apply the exponent rule:} \quad a^b \cdot a^c=a^{b+c}[/tex]

[tex]\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x[/tex]

Integrate using the power rule (increase the power by 1, then divide by the new power):

[tex]\begin{aligned}\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x&=2\pi \left[\dfrac{2}{5}x^{\frac{5}{2}}\right]^{16}_0\\\\&=2\pi \left[\dfrac{2}{5}(16)^{\frac{5}{2}}-\dfrac{2}{5}(0)^{\frac{5}{2}}\right]\\\\&=2 \pi \cdot \dfrac{2}{5}(16)^{\frac{5}{2}}\\\\&=\dfrac{4\pi}{5}\cdot 1024\\\\&=\dfrac{4096\pi}{5}\\\\&\approx 2573.593\; \sf (3\;d.p.)\end{aligned}[/tex]

Therefore, the volume of the solid is exactly 4096π/5 or approximately 2573.593 (3 d.p.).

[tex]\hrulefill[/tex]

[tex]\boxed{\begin{minipage}{4 cm}\underline{Power Rule of Integration}\\\\$\displaystyle \int x^n\:\text{d}x=\dfrac{x^{n+1}}{n+1}(+\;\text{C})$\\\end{minipage}}[/tex]

Answer:

1. Begin the program by including the header file <iostream> which includes basic input/output library functions as well as the <vector> library which is needed for this program.

2. Declare a vector of integer type named 'ageGroups' which will store the age groups and the corresponding membership fee and reductions.

3. Create a void function named 'calculateFee()' which will take a parameters age and activities attended.

4. In the calculateFee() function, use the switch statement for the age group and store the corresponding membership fee and reduction value in variables.

5. Use an if statement to check that the number of activities attended is non-negative.

6. Calculate the membership fee using the variables and store it in a variable named 'fee'.

7. Use an if statement to check if the fee is less than 1 and if yes, assign the fee to 1.

8. Print the fee to the user.

9. End the program.

Answer:

Step-by-step explanation:

[tex]diameter=\sqrt{(5+2)^2+(5+2)^2} \\=\sqrt{49+49} \\=\sqrt{98} \\=7\sqrt{2} \\radius=\frac{7\sqrt{2} }{2} \\\approx 4.95[/tex]

In the context of data-flow diagrams (DFDs), a(n) option a. data-flow line shows either the source or destination of the data.

In data-flow diagrams (DFDs), an entity symbol represents an external agent or entity that interacts with the system being modeled. It could be a person, organization, or system that sends or receives data from the system being modeled. An entity symbol is represented as a rectangle with its name written inside it. It shows either the source or destination of the data in the DFD. An example of an entity symbol in a DFD could be a customer who provides orders to a company, or a supplier who delivers goods to a company. The entity symbol helps to illustrate the flow of data between external entities and the system being modeled.

Learn more about mathematics here: brainly.com/question/24600056

#SPJ4

Check the picture below.

[tex]\measuredangle G=\cfrac{\stackrel{far~arc}{148}-\stackrel{near~arc}{106}}{2}\implies \measuredangle G=21^o \\\\\\ \hspace{6em}\measuredangle F=\cfrac{106}{2}\implies \measuredangle F=53^o\hspace{8em}\measuredangle G=106^o \\\\[-0.35em] ~\dotfill\\\\ ~\hfill \measuredangle FGH\textit{ is not an isosceles}~\hfill[/tex]

Answer:

Step-by-step explanation:

Area = 8 x 4 =24

Area doubled = 48

Let x be the amount we increase width and length to get area =48.

  [tex](6+x)\times (4+x)=48[/tex]

       [tex](x+6)(x+4)=48[/tex]

       [tex]x^2+10x+24=48[/tex]

       [tex]x^2+10x-24=0[/tex]

     [tex](x+12)(x-2)=0[/tex]

[tex]\text{gives }x=-12,2[/tex]

But [tex]x=-12[/tex] is not a practical solution.

So [tex]x=2[/tex] is the required solution.

We must increase the length and width by 2.

The profit-maximizing combination of resources for a firm is  MRPl / Pl = MRPc / Pc = 10/2 = 5/1 . The correct option is D).

The profit-maximizing combination of resources for a firm is determined by the equality of the marginal revenue product (MRP) per unit of input (labor, L, or capital, C) to the price per unit of input.

Therefore, the equation that represents the profit-maximizing combination of resources for a firm is:

MRPl / Pl = MRPc / Pc

where MRPl is the marginal revenue product of labor, Pl is the price of labor, MRPc is the marginal revenue product of capital, and Pc is the price of capital.

Among the given options, only option D satisfies the above equation. Therefore, option D represents the profit-maximizing combination of resources for a firm.

To know more about profit-maximising:

https://brainly.com/question/410554

#SPJ4

_____The given question is incomplete, the complete question is given below:

Which of the following equations represent the profit-maximising combination of resources for a firm?

A. MRPl / Pl = MRPc / Pc = 1

B. MRPl / Pl = MRPc / Pc = 5

C. MRPl / Pl = MRPc / Pc = 10/10 = 5/5

D. MRPl / Pl = MRPc / Pc = 10/2 = 5/1