The type of balance sheet analysis that sets total assets at 100% is known as Vertical analysis.
What is Vertical Analysis?
Vertical analysis is a method of examining a company's financial statements. A vertical analysis results in a proportional comparison of a company's reported internal accounts against one another or against the company's total financial accounts.In a vertical analysis of a balance sheet, the firm's entire assets are converted to 100%. The proportional size of each asset category on the balance sheet is then compared to this total. The proportion of each liability and shareholder equity account is calculated using the same methodology.
For instance, if a company has a balance sheet with total assets of $50,000, and inventory is one of the asset accounts, which is $10,000, then the proportion of inventory to total assets is 20% (i.e. 10,000/50,000).
Advantages of Vertical Analysis: A vertical analysis of a firm's financial statements can aid in the identification of patterns and trends, as well as the company's relative performance. Vertical analysis can also be used to compare two firms' financial statements. However, it is important to compare firms of comparable sizes and in the same industry sector since they have different financial structures.
Learn more about Vertical analysis:https://brainly.com/question/29392869
#SPJ11
quintavius loves to tinker with computers so he sets off to see how many networking services he can install in one physical server. he sets up the system to support dchp, dns, http, https, telnet, ssh, and an email server. on what port will these services listen?
If desired, certain of these services, like HTTP and HTTPS, can be set up to listen on different ports. Additionally, depending on their particular configuration, some services might use other ports or protocols.
What port does HTTPS, often known as secure HTTP, use?The Internet Engineering Task Force (IETF) has approved TCP port 443 as the default HTTPS protocol. It provides a method of data encryption that may be used by web servers and browsers. HTTPS port 443 secures network traffic packets prior to data transmission.
Which of http and https is more secure?HTTPS is HTTP with encryption. Since HTTPS uses TLS (SSL) encryption for even standard HTTP requests and responses, it is more secure than HTTP. This is the major distinction between the two words.
To know more about HTTP visit:-
https://brainly.com/question/30175056
#SPJ1
What is the 48-bit destination address in the Ethernet frame?
Each node in a LAN has a physical address, also referred to as a MAC/Ethernet address. This 6 byte (48 bit) long address, which is etched onto the Ethernet card, is specific to each node on the LAN (also known as the network interface card). Byte-counting is the basis of Ethernet.
What is meant by Ethernet frame?The Ethernet header, the first two fields of which are the source and destination MAC addresses, is the first component of every Ethernet frame. The payload data, which includes any headers for other protocols (like Internet Protocol) carried in the frame, is contained in the center region of the frame.Same principles apply to an Ethernet frame. It is a container for data that transports data, known as the payload, between two points on the same network and has a source and destination address. The header of an Ethernet frame, which includes the source and destination MAC addresses in addition to other information, comes first. The actual data is in the centre of the frame. At the bottom of the frame is a field called Frame Check Sequence (FCS). The IEEE 802.3 standard contains a definition of the Ethernet frame structure.To learn more about Ethernet frame, refer to:
https://brainly.com/question/28930681
in a sumifs formula, what is the maximum number of criteria_rangen arguments?
The number of criteria range parameters you can use is up to 127, each with a matching set of criteria. Whilst it's normally preferable to limit the amount of criteria, bear in mind that adding too many sumifs
Excel's SUMIFS function enables you to sum data based on a variety of factors. It is a flexible formula that can assist you in reviewing and analysing the information in a worksheet. Simple syntax defines the range of values to be totaled in the sum range argument and the ranges to which the criteria will be applied in the criteria range argument of the SUMIFS function. A SUMIFS formula is an effective tool for filtering and aggregating huge datasets since it allows for the inclusion of up to 127 criteria range parameters. For situations where you must compute totals based on certain circumstances, such as financial modelling, data
Learn more about sumifs here:
https://brainly.com/question/16170424
#SPJ4
How do I fix the default permission settings do not grant Local Activation permission for COM server application with Clsid?
To fix the issue where the default permission settings do not grant Local Activation permission for COM server application with Clsid, you can follow these steps: Click the Start and search dcomcnfg, click on DCOM Config, Properties, Security tab, Launch and Activation Permissions, Local Service and Restart your computer.
Click the "Start" menu and search for "dcomcnfg" (without the quotes) and hit Enter.In the Component Services window that opens up, expand the "Computers" folder, then the "My Computer" folder, and then click on "DCOM Config".Scroll down the list of applications until you find the one with the Clsid that is causing the issue. Right-click on it and select "Properties".In the Properties window, go to the "Security" tab.Under "Launch and Activation Permissions", click on "Edit".Click on "Add" and type "Local Service" (without the quotes) and click "OK".Select "Local Service" in the list of group or user names and then tick the box next to "Local Activation" under "Permissions for Local Service".Click "OK" to close all the windowsRestart your computer for the changes to take effect.These steps should grant Local Activation permission for the specified COM server application with Clsid, and should resolve the issue with default permission settings.
Learn more about default permission settings :https://brainly.com/question/30082022
#SPJ11
Online analytical processing is another name for enterprise application.
1) True
2) False
False. Enterprise application is not another name for online analytical processing (OLAP). These are not interchangeable terms, though.
A technology called online analytical processing (OLAP) is used to evaluate data and draw insightful conclusions from sizable databases. Through the usage of OLAP, users can interactively evaluate multidimensional data from a variety of angles, including time, place, and product lines. Data is organised into cubes or hypercubes using a multidimensional model in OLAP systems, allowing users to quickly examine the data and spot patterns and trends. Advanced analytics skills like data mining and predictive modelling are also offered by OLAP tools. In order to give users access to real-time information on sales, customer behaviour, and corporate performance, OLAP is frequently utilised in business intelligence and analytics systems. In today's data-driven corporate climate, it is a crucial tool for making data-driven decisions and gaining a competitive edge.
Learn more about online analytical processing here:
https://brainly.com/question/29562301
#SPJ4
A _____ documents the details of a functional primitive, which represents a specific set of processing steps and business logic.
a. primitive description
b. logical description
c. function-based description
d. process description
"A process description documents the details of a functional primitive, which represents a specific set of processing steps and business logic." Option D is correct.
A process description is a written account of the steps involved in carrying out a specific function or operation. It provides a detailed overview of the business logic that underlies the process and outlines the specific steps required to carry out that function. A functional primitive, on the other hand, is a specific set of processing steps that carry out a particular business function.
The process description documents the details of this functional primitive, providing information on the inputs, outputs, and actions required to complete the process. This documentation is critical for ensuring that the process can be replicated accurately and consistently, which is essential for maintaining quality and efficiency in business operations.
Option D holds true.
Learn more about business logic https://brainly.com/question/30358060
#SPJ11
Service A new social mobile app you are developing allows users to find friends who are logged in and within a 10-mile radius. This would be categorized as a O A. geomapping O B. geolocating OC. geosocial OD. geoinformation O E geoadvertising
A new social mobile app you are developing allows users to find friends who are logged in and within a 10-mile radius. This would be categorized as Geosocial. The correct option is c.
Geosocial refers to the convergence of geographical data and social media data. It includes data generated by social media platforms that have some geographical metadata or data that can be geocoded and then used for spatial analysis.Geosocial services refer to web services and mobile apps that use geographical information as part of their social networking tools. These services allow people to share information based on their location, such as check-ins, location tagging, or geotagging of photographs. They also allow people to find and connect with other people based on their location. Therefore, in the given scenario, the new social mobile app that allows users to find friends who are logged in and within a 10-mile radius would be categorized as geosocial.The correct option is c.Learn more about mobile here: https://brainly.com/question/1763761
#SPJ11
is an online tool designed for delivering news articles, blogs, and other content regularly published to a web site. a. blog b. video-on-demand c. voip d. rss
Answer:
RSS (Really Simple Syndication) is an online tool
What is RSS?
The online tool designed for delivering news articles, blogs, and other content regularly published to a web site is known as RSS. RSS is an abbreviation of Really Simple Syndication. It's an internet protocol that enables users to receive the latest information and articles from a website of their choice by subscribing to it. This protocol enables publishers to syndicate their web content immediately and distribute it to subscribers automatically.
Explanation:
RSS feeds are delivered to subscribers using the RSS aggregator or feed reader software, which gathers and displays the updated material in one location.RSS is a powerful tool for blogs, news sites, and other web-based organizations to easily and quickly publish content to their users. When users subscribe to an RSS feed, they receive updates whenever new content is published on the web site. This helps users stay up-to-date on the latest news and events in their field of interest, without having to check multiple web sites manually.
In conclusion, the correct answer is option D.
To learn more about RSS from here:
https://brainly.com/question/12303970
#SPJ11
how to tell if an object is moving in a positive or negative direction based on a position vs time graph
To tell if an object is moving in a positive or negative direction based on a position vs time graph, you need to look at the slope of the graph.
If the slope of the graph is positive, the object is moving in a positive direction. If the slope of the graph is negative, the object is moving in a negative direction. Here are the steps to follow:Step 1: Analyze the x-axis and y-axis of the graph. In a position vs time graph, the x-axis represents time, and the y-axis represents position. Step 2: Determine the slope of the graph. The slope of the graph will indicate whether the object is moving in a positive or negative direction. If the slope is positive, the object is moving in a positive direction. If the slope is negative, the object is moving in a negative direction. If the slope is zero, the object is not moving. Step 3: Analyze the shape of the graph. If the graph is a straight line, it means that the object is moving at a constant speed. If the graph is curved, it means that the object is changing its speed over time.
Learn more about kinematics in physics:https://brainly.com/question/26407594
#SPJ11
personal selling to provide information and support after the sale and advertising in trade publications are common promotion elements when the purchaser is blank .
Personal selling to provide information and support after the sale and advertising in trade publications are common promotion elements when the purchaser is a business or an organization.
When selling to businesses or organizations, personal selling can be an effective way to establish relationships with key decision-makers, provide information about products or services, and offer support after the sale. This is because business-to-business (B2B) sales often involve more complex and higher-value transactions that require a greater degree of trust and personalized attention.
Advertising in trade publications is another common promotion element in B2B marketing. Trade publications are industry-specific magazines or journals that provide information about the latest trends, products, and services in a particular field. Advertising in these publications can help businesses reach a targeted audience of professionals who are interested in their products or services.
You can learn more about Personal selling at
https://brainly.com/question/7304387
#SPJ11
a cloudfront distribution is a link between an origin server and a domain name, which cloudfront uses to identify the object you have stored in your origin server. true or false
The statement "A CloudFront distribution is a link between an origin server and a domain name, which CloudFront uses to identify the object you have stored in your origin server" is true.
Amazon CloudFront is a content delivery network that aids in the acceleration of the delivery of your static and dynamic web content, such as .html, .css, .js, and images, to your users. This implies that when you use Amazon CloudFront to transfer your content, it is accelerated and offered to your viewers from a nearby location, increasing the speed and decreasing the response time of the website.
An Amazon CloudFront distribution is a link between an Amazon S3 bucket or an HTTP server (which can be your web server or your custom server) and the network edge locations where your content is cached. When you utilize CloudFront to deliver your content, CloudFront creates a web distribution with a unique CloudFront domain name and distributes it to all of the edge locations.
However, it's vital to understand that a CloudFront distribution does not store the original files themselves; rather, it stores cached copies of the files that were copied from the origin server. CloudFront allows you to save costs by allowing you to create, maintain, and scale a single origin server that can serve multiple clients in various locations, and you only pay for the actual data transfer and requests that are made.
Learn more about Amazon CloudFront:https://brainly.com/question/14014995
#SPJ11
True or False: TCP/IP protocol involves identifying, sending, and receiving devices and breaking information into small parts for transmission across the Internet.
The given statement "TCP/IP protocol involves identifying, sending, and receiving devices and breaking information into small parts for transmission across the Internet." is true becasue it correctly defines the function of TCP/IP protocol.
The TCP/IP (Transmission Control Protocol/Internet Protocol) protocol is a set of communication protocols that are used for communication over the internet. TCP/IP protocol involves identifying, sending, and receiving devices and breaking information into small parts (packets) for transmission across the Internet. The protocol is responsible for ensuring that data is transmitted reliably and efficiently between devices, and it is used to establish and maintain connections between devices on a network.
TCP/IP is a fundamental protocol for the Internet, and it is used for a wide range of applications, including web browsing, email, file transfer, and many others.
You can learn more about TCP/IP protocol at
https://brainly.com/question/27975075
#SPJ11
[CHANCE TO EARN 50 POINTS!!!!!!!!!!!!}
Create variables for the following (Using Python):
1.8 deaths per second
deaths per min
deaths per hour
deaths per day
deaths per year
Find the number of deaths in one year
Find the number of deaths in 3 years
Find the number of deaths in 10.5 years
Answer:
Here's how you can create variables for deaths per second, minute, hour, day, and year in Python and find the number of deaths in one year, three years, and 10.5 years:
# Define deaths per second
deaths_per_second = 1.8
# Calculate deaths per minute, hour, day, and year
deaths_per_minute = deaths_per_second * 60
deaths_per_hour = deaths_per_minute * 60
deaths_per_day = deaths_per_hour * 24
deaths_per_year = deaths_per_day * 365
# Calculate the number of deaths in one year, three years, and 10.5 years
deaths_in_one_year = deaths_per_year
deaths_in_three_years = deaths_per_year * 3
deaths_in_ten_half_years = deaths_per_year * 10.5
# Print the results
print("Deaths per second:", deaths_per_second)
print("Deaths per minute:", deaths_per_minute)
print("Deaths per hour:", deaths_per_hour)
print("Deaths per day:", deaths_per_day)
print("Deaths per year:", deaths_per_year)
print("Number of deaths in one year:", deaths_in_one_year)
print("Number of deaths in three years:", deaths_in_three_years)
print("Number of deaths in 10.5 years:", deaths_in_ten_half_years)
Output:
Deaths per second: 1.8
Deaths per minute: 108.0
Deaths per hour: 6480.0
Deaths per day: 155520.0
Deaths per year: 56764800.0
Number of deaths in one year: 56764800.0
Number of deaths in three years: 170294400.0
Number of deaths in 10.5 years: 596030880.0
write a computer program. using BASIC programming language to add even numbers between 2 to 60
When using the vi text editor, which of the following keys, when in command mode, will change to insert mode and place the cursor at the end of the current line?
The "i" key, when in command mode in vi text editor, will change to insert mode and place the cursor at the current cursor position, allowing the user to insert text at that location.
Vi is a popular text editor used in Unix-like operating systems, and it has different modes: command mode, insert mode, and visual mode. In command mode, the user can execute commands such as searching for text or copying and pasting text. To enter insert mode, the user needs to press a key such as "i," which will allow them to insert text at the current cursor position.
Once in insert mode, the user can type text until they want to return to command mode, where they can execute further commands. The "i" key specifically places the cursor at the end of the current line, making it a quick way to start inserting text at the end of a line without needing to navigate the cursor there manually.
Learn more about text editor https://brainly.com/question/29748665
#SPJ11
which of the following is not true? if you delete a document from any folder on your c: drive in windows,
The given statement "If you delete a document from any folder on your C: drive in Windows, it is permanently removed from your computer." is not true because when you delete a file from any folder on your C: drive in Windows, it isn't entirely removed from your computer.
Rather, its space on the hard drive is marked as "available" and can be overwritten by new data.The file can be recovered using data recovery software unless it has been overwritten with new data. As a result, you must use a data shredding tool or secure file deletion software to permanently erase sensitive data from your hard drive.How to permanently delete a document from your C: drive in Windows?You may permanently remove a document from any folder on your C: drive in Windows by following these steps:
Download and install a data shredding tool or a secure file deletion program on your computer.Choose the document you want to delete.Select "Shred" or "Secure Delete" from the right-click context menu.The file will be completely deleted from your computer, leaving no trace of it behind.Learn more about software: https://brainly.com/question/28224061
#SPJ11
Python Booleans:
1. Given two variables, is_empty of type bool, indicating whether a class roster is empty or not, and number_of_credits of type integer, containing the number of credits for a class, write an expression that evaluates to True if the class roster is not empty and the class is one or three credits.
2. Write a statement that toggles on_off_switch. That is, if on_off_switch is False, it is made equal to True; if on_off_switch is True, it is made equal to False.
The Expression is:
python
is_empty == False and number_of_credits in [1, 3]
What is the Python Booleans?The above expression first checks if is_empty is equal to False, indicating that the class roster is not empty. Then it checks if number_of_credits is either 1 or 3, indicating that the class is either a one-credit or three-credit class. If both conditions are true, the expression evaluates to True.
Statement:
makefile
on_off_switch = not on_off_switch
Therefore, This statement uses the not operator to toggle the value of on_off_switch. If on_off_switch is False, the not operator will evaluate to True, and on_off_switch will be assigned True. If on_off_switch is True, the not operator will evaluate to False, and on_off_switch will be assigned False.
Read more about Python Booleans here:
https://brainly.com/question/19595648
#SPJ1
define two variables, num1 and num2. write an assignment statement that performs the following operation with the variables num1 and num2: divides num1 by 10.5 and stores the result in num2. make sure there is no data loss.
To define two variables, num1 and num2 and assign using assignment the result of num1 by 10.5 in num2, we can write the following code:
double num1, num2;num2 = (num1 / 10.5);
-Variables are data entities that store data. They are used to store values and represent memory locations.
-Assignment statements are statements in a program that assign values to variables. In order to perform any arithmetic operation on the variables, the variables should have values. If the variables do not have any values, then it results in an error.
-To define two variables, num1 and num2, we can use the following statement: double num1, num2;
-The above statement creates two variables num1 and num2 and assigns them to zero. The data type of the variables is double.
-Now, let's write the assignment statement that performs the given operation with the variables num1 and num2:The assignment statement is as follows:num2 = (num1 / 10.5);
-This statement assigns the result of num1 divided by 10.5 to the variable num2. This operation will not result in any data loss because the data type of num1 and num2 is double. Therefore, the result will also be double.
Learn more about variables here: https://brainly.com/question/28248724
#SPJ11
what is the value (in binary) of AL, AH, and EAX gave the following hexadecimal values in the eax register? (1) 37e11449
AL=?
The value of AL in binary, given the hexadecimal value in the EAX register of 1) 37e11449 is 00110111.
The hexadecimal value 37E11449 has to be converted to binary and then, each register's value can be determined. So, let's begin with the conversion:
37E11449 3 7 E 1 1 4 4 9 in binary is 00110111111000010001000101001001
As a result, to get the value of each register, you must break down the binary number into 8-bit sections.
You can see that the first 8 bits are the values of AH, the next 8 bits are the values of AL, and the last 16 bits are the values of EAX. That is:
AH=00110111
= 0x37AL
= 11100000
You can learn more about hexadecimal values at: brainly.com/question/30508516
#SPJ11
bob is preparing to dispose of magnetic media and wishes to destroy the data stored on it. which method is not a good approach for destroying data? a. repeatedly overwriting data b. degaussing c. physical destruction d. formatting
D: Formatting is not a good approach for destroying data as it only removes the pointers to the data, rather than actually erasing the data itself.
The data can still be recovered using specialized data recovery tools. On the other hand, repeatedly overwriting data, degaussing, and physical destruction are all effective methods for destroying data on magnetic media. Repeatedly overwriting data involves writing new data over the existing data multiple times until it becomes irretrievable. Degaussing uses a powerful magnet to scramble the magnetic fields on the media, making the data unreadable. Physical destruction involves shredding, burning, or pulverizing the media to render the data inaccessible.
You can learn more about destroying data at
https://brainly.com/question/10231287
#SPJ11
Denise is using a laptop computer that uses ACPI. She wants to see what percentage of the battery power is still available. She also wants to know if hibernation has been configured. Which of the following utilities should she use? A. Device Manager
B. Computer Manager
C. Battery meter
D. MMC
The utility she should use to see what percentage of the battery power is still available is: C. Battery meter.
The battery meter gives information about how much battery life is left on a laptop computer. It also displays the estimated time left to use the battery power, the status of the battery, and if hibernation is configured or not. Devices Manager: It is a utility that shows information about the devices installed on a computer. It is used to display device drivers, system resources, and hardware configurations. It also allows users to update drivers and troubleshoot hardware issues. Computer Manager: It is a utility that allows users to view system events, access shared folders, and manage user accounts. It also provides access to system tools such as disk management and device management.MMC (Microsoft Management Console): It is a tool used to manage network resources and Windows services. It also allows users to create customized management consoles. It includes various snap-ins that provide access to specific tools and resources.
Learn more about Battery meter:https://brainly.com/question/1377725
#SPJ11
true or false: nodes generally have a single entry in their default router lists, and all packets destined to nodes that are off-link are sent to their default gateway. question 3 options: true false
Nodes generally have a single entry in their default router lists, and all packets destined to nodes that are off-link are sent to their default gateway. The statement is true
What are nodes?Nodes generally have a single entry in their default router lists, and all packets destined to nodes that are off-link are sent to their default gateway.
Whenever a device wishes to transmit data packets to a destination, it must first identify whether the destination is within or outside the network. If the destination is outside the network, the device will use the default gateway to send data packets to the destination.
Nodes generally have a single entry in their default router lists, and all packets destined to nodes that are off-link are sent to their default gateway. Thus, the given statement is true.
To learn more about the default gateway check the below link:
brainly.com/question/27975111
#SPJ11
Orthogonality is when features of a programming language are intertwined heavily with each other. Using a feature may lead to side-effects with other featuresTrue or False
Programming language features are said to be orthogonal when they are closely entwined. The use of one feature could have an adverse influence on other ones. This assertion is untrue.
What is meant by programming language?Programmers (developers) use programming languages to interact with computers. Programming languages are made up of a set of rules that enable string values to be transformed into different forms of generating machine code, or, in the case of visual programming languages, graphical elements. The most popular coding language now in use worldwide is JavaScript. This is for good reason—one it's of the simplest languages to learn and is used by the majority of online browsers. Nearly little prior coding experience is necetoder to learn JavaScript; once you get started, you may start using it right away. Writing codes that a machine can understand is the focus of the programming discipline known as coding. The process of programming involves approving codes to construct programs.To learn more about programming language, refer to:
https://brainly.com/question/16936315
a loopback policy can be used to change user policy settings based on the gpo within whose scope a computer object falls.T/F
A loopback policy can be used to change user policy settings based on the GPO (Group Policy Object) within whose scope a computer object falls. This statement is true.
What is a loopback policy?
A loopback policy is a Microsoft Windows feature that allows the system to implement user policies on a computer object based on the group policy object (GPO) within which the computer object falls. This provides administrators with the flexibility to apply a different set of user policies to a certain group of computers regardless of which user logs in. It overrides the user's policy with the policy defined in the GPO based on the computer to which the user logs on. This functionality is frequently employed in terminal server environments or kiosks.
A loopback policy ensures that users logging onto a particular computer receive specific user policies rather than the standard policies assigned to their account. So, if a loopback policy is enabled on a computer, users logging on to that computer will have their user policies overwritten with the ones defined in the GPO that affects the computer object.
Learn more about Loopback policy here:
https://brainly.com/question/13264330
#SPJ11
what is programs that instruct computers to perform specific operations?
Answer:software, instructions that tell a computer what to do. Software comprises the entire set of programs, procedures, and routines associated with the operation of a computer system. The term was coined to differentiate these instructions from hardware—i.e., the physical components of a computer system.
Explanation:
true or false when the ipconfig /release command is run, the dhcp client on the computer sends a dhcprelease message out.
True. When the ipconfig /release command is run, the DHCP client on the computer sends a DHCP release message.
Dynamic Host Configuration Protocol (DHCP) is a protocol used on IP networks that assigns IP addresses and other parameters to network devices.
DHCP release sends a DHCPRELEASE message to the DHCP server, asking it to release the IP address and other network configurations that the server assigned to the DHCP client.
The DHCP client also informs the DHCP server that it should no longer reserve the IP address for the client. DHCP enables you to automatically configure IP addresses and other network configuration settings on network devices.
It simplifies network configuration and management by allowing you to specify a range of IP addresses that the DHCP server can assign to network devices, and it automatically assigns IP addresses from the specified range to each device that connects to the network.
To know more about DHCP:https://brainly.com/question/29432103
#SPJ11
all of the following are reasons we use subprograms except ? group of answer choices to help us organize longer programs to add comments to lines of code for code that will be reused to simplify code
Answer: D, To add comments to lines of code
Explanation:
All of the following are reasons we use subprograms except ?
Group of answer choices
A. For code that will be reused
B. To simplify code
C. To help us organize longer programs
D. To add comments to lines of code
Subprograms do not add comments to the code, this must be done by the programmer.
(Hope this helps)
The _____ is a collection of HTML documents, images, videos, and sound files that can be linked to each other and accessed over the Internet using a protocol called HTTP.
The collection of HTML documents, images, videos, and sound files that can be linked to each other and accessed over the Internet using a protocol called HTTP is called a website.
A website is a collection of web pages that can be accessed through the internet. It contains a homepage, which is the starting point of the site. Each web page in a website has its unique address that is known as a URL or Uniform Resource Locator. T
he collection of HTML documents, images, videos, and sound files that can be linked to each other and accessed over the Internet using a protocol called HTTP is called a website. This protocol is a set of rules used to send and receive data through the internet.
You can learn more about website at
https://brainly.com/question/28431103
#SPJ11
In a data dictionary, some data elements have _____ rules. For example, an employee’s salary must be within the range defined for the employee’s job classification.
a. validity
b. domain
c. range
d. mastered
In a data dictionary, some data elements have validity rules. For example, an employee’s salary must be within the range defined for the employee’s job classification. The correct answer is option a.
A data dictionary is a set of metadata that gives a summary of the data structure and descriptions of its elements. Data dictionaries are utilized in database management systems to explain the schema of the database, including data types, constraints, and other information. It also identifies how data elements are connected, allowing for efficient access to and manipulation of data within the database. In a data dictionary, there are several types of rules for the data elements.Validity Rules: This type of rule verifies that the data entered into the database is valid, in other words, the data is complete, accurate, and complies with any constraints placed on the data elements. For example, the date of birth field in a database has a constraint requiring that the date must be in the form of mm/dd/yyyy. If the date is entered in a different format, such as dd/mm/yyyy, it will be flagged as an error.Domain Rules: This type of rule specifies the values that can be entered into a field. This kind of rule is also called a lookup rule. The domain rule for an Employee Type field, for example, could restrict entries to Full-Time, Part-Time, and Contractor.Range Rules: This kind of rule specifies the allowable range of numeric values that can be entered into a field. For example, a range rule for a field named Employee Salary would restrict salaries for different job classifications within an organization. A range rule for a field that accepts decimal values such as 3.0 would restrict the values that can be entered to include only decimal values like 3.0, 4.5, and so on.Therefore, the correct answer is option a.Learn more about dictionary here: https://brainly.com/question/26497128
#SPJ11
conventional dial-up connects to the internet at a maximum of . a. 10.2 kbps b. 28.8 kbps c. 56 kbps d. 128 kbps
Conventional dial-up connects to the internet at a maximum of 56 kbps. It uses conventional telephone line. The correct option is C.
A dial-up connection is a connection to the internet that uses a conventional telephone line to make a dial-up connection to an Internet service provider (ISP). It's the slowest and most traditional way of connecting to the internet. It also ties up a phone line while in use.
The maximum speed at which conventional dial-up connects to the internet is 56 kbps. Because this technology uses the regular telephone network to connect, connection speeds are limited to what telephone wires can support, resulting in relatively slow speeds. At best, a dial-up connection can offer a maximum data transfer rate of 56 Kbps.
Therefore, the correct option is C.
Learn more about Dial-up connection here:
https://brainly.com/question/3521554
#SPJ11