The data that should only be input once on your spreadsheet are ideally the data that are repeated multiple times. The "one source of truth" principle refers to this.
A spreadsheet is a piece of software that is used to tabulate, organise, and analyse data. Data entry, manipulation, and analysis are all possible using a grid of rows and columns. Spreadsheets are frequently used in business, finance, accounting, and other fields where it is necessary to swiftly organise and analyse huge volumes of data.
Data can be sorted, filtered, and examined in a spreadsheet using a variety of tools, such as formulae, functions, and charts. With programming techniques like macros, it is also possible to automate routine processes. Spreadsheets are a crucial tool for data analysis and decision-making because they allow users to base their choices on correct and current data.
Learn more about spreadsheet here:
https://brainly.com/question/28910031
#SPJ4
You are a computer support technician contracted to help determine the best IEEE 802.11 WLAN solution for a small office installation. The office is located in a multitenant building on the fifth floor of an eight-story building. Another business in an adjoining office is using an IEEE 802.11b WLAN operating on channels 1 and 6. The customer wants maximum throughput and does not need backward compatibility to IEEE 802.11b. Of the following, which is the best solution for this installation? A. Install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11. B. Install an IEEE 802.11b DSSS WLAN and set the access point to automatic channel select. C. Install an IEEE 802.11b/g HR/DSSS, ERP-OFDM WLAN with protection enabled to eliminate RF interference. D. Install an IEEE 802.11n/ac WLAN, enable HR/DSSS only, and set the output power to maximum.
The best solution for a computer support technician who is assigned to decide the best IEEE 802.11 WLAN solution for a small office installation is-
A. install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11.
IEEE- IEEE refers to the Institute of Electrical and Electronics Engineers, which is an organization that promotes technological innovations and excellence throughout the world. IEEE has set up numerous technological standards to enhance device performance and compatibility. IEEE 802.11 refers to a wireless networking standard, commonly known as Wi-Fi. WLAN stands for Wireless Local Area Network.
Problem in this case- Another business is utilizing an IEEE 802.11b WLAN operating on channels 1 and 6. The customer wants maximum throughput and does not need backward compatibility to IEEE 802.11b. Therefore, the channel numbers 1 and 6 are already occupied. This implies that channel 11 should be used instead.
ERP protection should be disabled to enhance the data transfer rate. The ERP protection may impact the transmission rates of an IEEE 802.11n WLAN, and the customer wants to achieve the maximum throughput. As a result, this option is selected. Hence, it can be concluded that the best solution for this installation is to install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11.
Therefore option A is the correct answer.
"IEEE", https://brainly.com/question/31143015
#SPJ11
Which of the following is an advantage to an organization if its BYOD (bring your own device) policy offers wireless network to mobile devices?
A) Employees gain public access from any device, not just mobile devices.
B)The organization can sniff employees' mobile traffic.
C)Employees resist turning over the management of their own hardware to the organization.
D)The policy appears to be permissive without actually being so.
An advantage to an organization if its BYOD policy offers wireless network to mobile devices is "Employees gain public access from any device, not just mobile devices". The correct option is A.
What is BYOD policy?Bring Your Own Device (BYOD) policy enables employees to utilize their own mobile devices and laptops to access their company's networks, systems, and data.
If the organization provides wireless networks to mobile devices under its BYOD policy, the following are the benefits: Advantages of BYOD policy wireless network to mobile devices in an organization.
Employees gain public access from any device, not just mobile devices. Allows the usage of multiple types of mobile devices and laptops with a single wireless network. Offers more access to employees who require remote access to files and data. Boosts efficiency, productivity, and the ability to work from any location. The organization provides an avenue for productivity while reducing device acquisition costs for new equipment.
In conclusion, the BYOD policy has helped organizations by improving communication between employees, enhancing business processes, and ensuring that the data and devices are managed and protected effectively.
Therefore, the correct option is A.
Learn more about BYOD policy here:
https://brainly.com/question/30355320
#SPJ11
am using a Visual Studio toolchain with the vscode-cpptools extension for VS Code and getting the following error:cl.exe build and debug is only usable when VS Code is run from the Developer Command Prompt for VS.What is the cause of the error and how can it be resolved?
The error "cl.exe build and debug is only usable when VS Code is run from the Developer Command Prompt for VS" occurs because the cppTools extension requires certain environment variables to be set up for the Visual Studio toolchain to work correctly.
These environment variables are set up automatically when Visual Studio is launched from the Developer Command Prompt, but not when VS Code is launched directly.
To resolve this error, you can launch VS Code from the Developer Command Prompt for VS instead of launching it directly. Alternatively, you can manually set up the required environment variables by adding them to your system's environment variables. You can find the required environment variables and their values in the documentation for your Visual Studio toolchain. Once the environment variables are set up correctly, you should be able to build and debug your code using the cppTools extension in VS Code.
To know more about Command Prompt click here:
brainly.com/question/27986533
#SPJ4
attempting to break a password or encryption through repeated trial and error is called?
The term "brute force attack" refers to the process of making repeated attempts to crack an encryption or password.
A brute force assault involves trying all character combinations until the right one is found in an effort to crack a password or encryption key. Cybercriminals frequently employ this style of attack to obtain unauthorised access to secure systems or sensitive data. Brute force assaults, which can be carried out manually or automatically, can take a lot of time and resources, especially if the passwords or encryption keys are strong and contain a lot of potential combinations. Several security systems use techniques like restricting the number of login attempts, adding pauses between login attempts, or implementing multi-factor authentication to defend against brute force assaults. To stop brute force assaults, it's crucial to utilise encryption keys and strong passwords.
Learn more about "brute force attack" here:
https://brainly.com/question/28119068
#SPJ4
81.0% complete question a cloud administrator deploys two cloud servers on the amazon web services (aws) platform, each in a separately defined virtual network. how does the administrator get both servers to communicate with each other without using an internet gateway?
The cloud administrator gets both servers to communicate with each other without using an internet gateway by creating a VPC Peering Connection between the two virtual networks.
What is VPC! Virtual Private Cloud (VPC) is a virtual network that enables the user to launch AWS resources into a virtual network that the user has defined. It helps in providing complete control over the virtual networking environment such as the selection of IP address range, creation of subnets, and configuration of route tables & network gateways. VPC Peering Connection VPC Peering Connection is a network connection that enables the user to route traffic between two VPCs in the same region using private IP addresses. It makes it easy to connect VPCs that are part of a similar account or are owned by different accounts within the same region. Also, VPC peering is possible across multiple accounts as long as they are within the same region. Here are the steps to create VPC Peering Connection:
Step 1: Log in to your AWS account.
Step 2: Go to the VPC console.
Step 3: Select Peering Connections and then Create Peering Connection.
Step 4: Fill out the form. You'll need to enter the ID of the VPC that you're peering with.
Step 5: Click Create Peering Connection. Your VPC Peering Connection is now created.
The user can now establish a VPC Peering Connection between the two virtual networks to enable the servers to communicate with each other.
Learn more about VPC visit:
https://brainly.com/question/30611494
#SPJ11
can call anywhere in the world with this system. true. true or false from a satellite phone system you can call anywhere in the world.
Yes, you can make calls to any country in the world using a satellite phone system. Satellite phones are not constrained by the coverage areas of terrestrial networks because they connect via satellites orbiting the Earth.
A satellite phone system is a kind of mobile communication network that connects users by using satellites in Earth's orbit. Satellite phone systems are not constrained by coverage areas and can offer access almost everywhere in the world, in contrast to conventional cell phone networks that depend on terrestrial infrastructure like cell towers and cables. As a result, persons who work or travel in distant or isolating places, like hikers, sailors, and emergency responders, require the use of satellite phone systems. Although they can function as a means of communication when terrestrial networks are compromised or destroyed, satellite phone systems are also employed in disaster response and recovery operations. Yet, because of the technology required to set up a satellite, satellite phone calls could be more expensive than regular calls.
Learn more about satellite phone system here:
https://brainly.com/question/18496962
#SPJ4
imagine you need to keep a list of donors for a fundraising event, so that you can send thank-you cards. the 'donor' class has name and address. you know that you will have at most 400 donors and you really don't care what order they are stored in. you aren't going to add more donors later, and the only thing you are going to do is eventually iterate the list and print out address labels. what type of list should you use? group of answer choices a. doubly-linked, sorted list b. arraylist c. sorted list d. singly-linked list
The list that you should use to keep a list of donors for a fundraising event, so that you can send thank-you cards is a type of list called an `arraylist`.
-An `arraylist` should be used when you have an idea of the maximum size of a list and the list is not going to change and you aren't going to add more donors later. -An `ArrayList` is similar to an array, but it has the ability to resize automatically, as you add or remove elements from it. Unlike an array, you don't need to give an `ArrayList` a fixed size when you create it, but you can give it an initial size if you have a good idea of how many elements you will need.-When creating an `ArrayList`, you should specify the type of elements it will contain in angle brackets, like this:ArrayList donorList = new ArrayList();-Then you can add elements to the list using the `add()` method:donorList.add("John Doe");donorList.add("Jane Doe");-To print out the address labels, you can simply iterate over the list using a loop and print out the address for each donor.Learn more about arraylist here: https://brainly.com/question/30752727
#SPJ11
which of the following statements about desktop computers, servers, and mainframe computers is true?a. Each terminal runs its own programs.b. The terminal requests resources from the mainframe.c. The mainframe/terminal network model is the most popular network model today.d. A mainframe computer runs all programs directly on the mainframe.
The statement that is true about desktop computers, servers, and mainframe computers is that d) "A mainframe computer runs all programs directly on the mainframe.
A mainframe computer is a kind of large computer used for high-volume, data-intensive applications. It is more frequently found in large enterprises or public service corporations due to its ability to handle huge amounts of data. A server is a piece of software that provides functionality for other software.
The term "server" refers to a particular piece of hardware that runs software, such as a web server or a file server. A terminal is an electronic or electromechanical hardware device that is used to communicate with a mainframe computer or other server. Each terminal runs its own programs is a false statement. This is due to the fact that terminals are often used to access servers or mainframes, where programs are usually run. The terminal requests resources from the mainframe is also an incorrect statement. This is because a terminal requests resources from a server or mainframe only when it requires additional processing power or data to complete a task. The mainframe/terminal network model is not the most popular network model today. A Client-Server model is the most popular network model today. d) "A mainframe computer runs all programs directly on the mainframe is the correct answer.Learn more about mainframe visit:
https://brainly.com/question/28938928
#SPJ11
When presenting text or pictures copied from someone else's Web page, you should be sure to credit the source by including a ______.
When presenting text or pictures copied from someone else's Web page, you should be sure to credit the source by including a citation.
What is a citation?
A citation is a reference to a source that a researcher has used in an academic paper or written work. A citation is a brief reference that allows the reader to locate the source of information. Citation of sources is a critical component of academic writing since it allows the reader to distinguish between your work and the work of others.
Citation is important because it allows you to:
Build credibility for your workGive credit to authors whose work you've usedGive readers the opportunity to learn more about the subject matter you're writing aboutAssist readers in locating the sources you used in your research or writing.The different styles of citation include the APA (American Psychological Association) style, the MLA (Modern Language Association) style, the Chicago Manual of Style, and the Turabian style. The citation styles are determined by the type of writing being done and the discipline in which the research is being conducted.
Learn more about citation:https://brainly.com/question/8130130
#SPJ11
how to tell if someone blocked your number without texting them
Answer:
It depends based on the application
Explanation:
For example, with WA, their profile picture is removed and you can only see their name. You can't see when they're last online, or if they are online at that moment. If you do decide to send a text, it will only show 1 mark instead of 2. IG will hide the message thread that you have previously had with said person for both of you. On SC, if you search for their username, it won't show up with any results.
the windows 10 operating system can benefit from the new technology file system's ability to track access or attempted access to files. what ntfs option is being used to perform this task?
Answer:
The Windows 10 operating system can benefit from the new technology file system (NTFS) option known as 'auditing'.
What is NTFS?
NTFS is a technology file system that is utilized by the Windows operating system. This system has several advanced features, including file compression and security, that can improve your system's overall performance and functionality.
Explanation:
Auditing is the technique of verifying and checking the security of the computer's operating system. It has been used to track access or attempted access to files on the Windows 10 operating system. It is useful for monitoring and logging access or attempted access to critical system files, directories, and other resources.NTFS file system can benefit from the new technology file system's ability to track access or attempted access to files by using the "Auditing" option. Therefore, this is the NTFS option being used to perform this task.
To learn more about NTFS from here:
https://brainly.com/question/13044551
#SPJ11
10. A computer program that runs in a Web Browser is known as a ____ _____________. I NEED HELP NOWWWWWWW
Answer:
web application
Explanation:
A web application (or web app) is application software that is accessed using a web browser.
what propagation technique where a stem is placed in contact with media or soil and allowed to root?
Stem cutting propagation, or simply "stem propagation," is the method of propagation in which a stem is placed in touch with media or soil and allowed to root.
In the process of stem cutting propagation, a healthy plant's stem cutting is removed and placed in a rooting media or soil where it can establish roots and become a new plant. In horticulture, this method is frequently used to multiply attractive plants like roses, lavender, and mint. The cutting may comprise one or more nodes where leaves arise from the stem and is normally taken from the parent plant using a sharp, sterile tool. The stem cutting can develop roots and eventually develop into a new plant that is genetically similar to the parent plant under the right circumstances, such as adequate soil moisture and light. This method is well-liked because it's reasonably easy and affordable.
Learn more about "stem cutting propagation" here:
https://brainly.com/question/27116910
#SPJ4
Your firm has recently converted its purchasing cycle from a manual process to an online computer system. Which of the following is a probable result associated with conversion to the new automatic system?A. Processing time is increased.B. The firm's risk exposures are reduced.C. Traditional duties are less segregated.D. Processing errors are increased.
The probable result associated with conversion to the new automatic system is that "traditional duties are less segregated." Option C is correct.
When a firm converts its purchasing cycle from a manual process to an online computer system, the traditional segregation of duties may be disrupted. This is because the new system may centralize tasks and responsibilities that were previously segregated among different individuals or departments.
For example, the new system may allow a single individual to initiate, approve, and execute a purchase transaction. This increases the risk of fraud or errors as there are fewer checks and balances in place.
Therefore, it is important to establish appropriate controls and monitoring mechanisms to mitigate the risk of fraud or errors and ensure that the segregation of duties is maintained in the new system. Option C holds true.
Learn more about purchasing process https://brainly.com/question/27975123
#SPJ11
What contributions did you make in this period and what was the resulting business impact?
Giving examples of your prior successes and relating them to what you can accomplish in the future are the greatest ways to respond to inquiries regarding your contributions to the firm. First and foremost, make sure you have done your homework on the company so you are aware of its objective before the interview.
Attempt to identify the unique needs of the organization, and then reply by providing instances of how your education, accomplishments, talents, and experience will help the employer meet those demands.
Spend a minute comparing your aims to those of the business and the position, as well as outlining your prior accomplishments.
Be upbeat and restate how much you want the position and the firm.
We provide one-on-one sessions for individualized interview preparation that are catered to your needs and concentrated on the position and organization you are interviewing for.
Learn more about business here brainly.com/question/15826771
#SPJ4
a technology implemented in modern laptops that enables data transfer and authentication features between the laptop and another portable device at a very close range is known as
The technology described in the answer is called Near Field Communication (NFC).
It enables devices, such as smartphones and laptops, to establish a wireless connection and exchange data with other compatible devices when they are placed in close proximity to each other. NFC can be used for various purposes, such as making mobile payments, sharing files, pairing devices, and accessing digital content. It uses radio frequency identification (RFID) technology to communicate between devices, and it is considered to be a secure and convenient way to transmit data due to its short range and encryption capabilities.
You can learn more about Near Field Communication (NFC) at
https://brainly.com/question/15584870
#SPJ11
the purpose of a business impact analysis (bia) is to determine: a. the impact of a disaster b. the extent of damage in a disaster c. which business processes are the most critical d. which processes depend on it systems
The purpose of a business impact analysis (BIA) is to determine: Which business processes are the most critical. c is correct option.
Business Impact Analysis (BIA) is a process that examines the potential consequences or effects of a failure, interruption, or disruption of a critical business function or process in an organization.
The goal of BIA is to provide data that will help to mitigate the potential effects of a disruptive event and to help the organization's recovery in a timely and efficient manner.
BIA is critical for both organizations' risk management and contingency planning, which are important aspects of business continuity planning (BCP).
There are a few primary objectives of BIA, which are as follows: To provide an understanding of business processes, including the inputs, outputs, systems, and users that are needed for them to work.
To determine the relative importance of business processes and to identify the critical ones that need to be addressed as part of the BCP. To identify the operational and financial impacts that could result from a disruption or failure of critical business processes. To provide recommendations for disaster recovery strategies and other mitigation measures that can be taken to minimize the potential effects of a disruption or failure of critical business processes.To identify the resources that will be required to restore critical business processes and to establish recovery time objectives (RTOs) and recovery point objectives (RPOs).To assess the organization's overall readiness to respond to a disruptive event and to identify any gaps in preparedness that need to be addressed. c is correct option.To know more about Business Impact Analysis:https://brainly.com/question/17302711
#SPJ11
which of the following is not a cloud computing service? a. software as a service b. network as a service c. infrastructure as a service d. platform as a service
The following is not a cloud computing service that option b network as a service. Therefore option b is the correct option
What is cloud computing?Cloud computing is a technology that enables users to access computing resources such as computing power, storage, and software applications through the internet.
It allows businesses to access the technological infrastructure and services they need without owning or managing the underlying technology infrastructure. There are four types of cloud computing services: Software as a Service (SaaS), Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Network as a Service (NaaS).
Thus option b is the correct option
Read more about the service:
brainly.com/question/1286522
#SPJ11
which ip address class has the first two octets reserved for the network id and the last two octets for the host id?
The IP address class that has the first two octets reserved for the network ID and the last two octets for the host ID is the class B IP address.
An IP address is a numerical representation of a device's location on a network. Every device on a network has a unique IP address, which is used to recognize it and facilitate communication between devices on the network. IP addresses are classified based on the number of bits used for the network and host IDs.
There are five distinct IP address classes, with class A, B, and C being the most commonly used. IP address classes The IP address classes are: A - the first octet of a class A IP address is reserved for the network ID, while the remaining three octets are used for the host ID.
Class A IP addresses range from 1.0.0.0 to 126.0.0.0.B - the first two octets of a class B IP address are reserved for the network ID, while the last two octets are used for the host ID. Class B IP addresses range from 128.0.0.0 to 191.255.0.0.C - the first three octets of a class C IP address are reserved for the network ID, while the last octet is used for the host ID.
For such more question on IP address:
https://brainly.com/question/14219853
#SPJ11
Which of the following tasks makes the most sense as a void function?
Select one:
a. Print the calendar for a month, given the month and year.
b. Decide whether a number is even.
c. Calculate the square root of a number.
d. Calculate a sales commission, given the sales amount and the commission rate
The following task that makes the most sense as a void function is a. "print the calendar for a month, given the month and year."
Functions are used to accomplish specific tasks by performing certain actions. In C++, there are two types of functions: void functions and value-returning functions.Void functions perform an action and do not return a value, while value-returning functions return a value after performing the desired operation. A void function can be used to print the calendar for a month, given the month and year. This function performs a task and does not return any value. Therefore, it is best suited as a void function. Therefore, option a. Print the calendar for a month, given the month and year makes the most sense as a void function.
Learn more about void function: https://brainly.com/question/25644365
#SPJ11
when exploring the k-means clustering of a data set you examine the projections of the first two principle component of the cluster ellipses, for a certain number of clusters, and you observe: * the major and minor axes of each of the ellipses are of distinctly different length. * the directions of major axes of the ellipses are distinctly different. which of the following statements is true? a. the number of clusters chosen is too many for this dataset and should be reduced. b. the number of clusters chosen fits this dataset well. c. clustering is not a useful method for this dataset. d. the clusters will exhibit a poor separation
The number of clusters chosen fits this dataset well when exploring K-means. The correct answer is b.
Cluster analysis is a class of techniques for identifying objects or individuals that are related or related to each other. K-means clustering, the most popular technique, is used to classify objects into K-numbered clusters in a data set. It is used in statistics, bioinformatics, computer science, marketing, and many other fields.K-means clustering of a data set involves examining the projections of the first two principle components of the cluster ellipses for a certain number of clusters. When the number of clusters chosen fits the dataset well, then it implies that the projections of the first two principle components of the cluster ellipses, for a certain number of clusters, shows that the major and minor axes of each of the ellipses are of distinctly different length, and the directions of major axes of the ellipses are distinctly different.In other words, when the projections of the first two principle components of the cluster ellipses, for a certain number of clusters, show that the major and minor axes of each of the ellipses are of distinctly different length and the directions of major axes of the ellipses are distinctly different, then it means that the number of clusters chosen fits this dataset well.The correct answer is b.Learn more about K-means here: https://brainly.com/question/17241662
#SPJ11
What device is used to automatically record (write down) changes in temperature?a thermostata thermophilea thermometera thermograph
Option-D: A device that is used to automatically record (write down) changes in temperature is a thermograph.
A thermograph is a device that records temperature over time. It contains a temperature sensor, such as a thermocouple, that is linked to a chart recorder. The chart recorder has a pen that draws a line on a paper chart as it moves across the page, recording the temperature over time. As the temperature fluctuates, the pen moves up and down, resulting in a temperature curve being recorded. Thermographs are utilized in a variety of applications to track temperature changes over time, including environmental monitoring, industrial process control, and weather forecasting.
A thermometer, on the other hand, is a device that measures the temperature of a particular object or environment at a specific moment in time.
A thermostat is a device that is used to control the temperature of a particular space or object by turning a heating or cooling system on and off.
A thermophile is an organism that thrives in high-temperature environments.Thus the correct answer is option-D:thermograph.
For such more questions on temperature :
brainly.com/question/1557910
#SPJ11
yasmin hamid is a first-year college student. knowing she will often research topics using her mobile phone and laptop, she wants a fast, secure browser that is also easy to use. evaluate and compare reviews of three browsers, at least one of them a mobile browser. consider chrome, microsoft edge, apple safari, mozilla firefox, opera, and others you might find in your research. recommend two browsers: one for when yasmin uses her laptop, and one for when she uses her mobile phone. discuss your experiences with these browsers and mention speed, security, and features in your recommendation.
I recommend that Yasmin use Goo gle Chrome for her laptop and Apple Safari for her mobile phone.
What is mobile?Mobile, or mobility, is the ability to move freely and easily from one location to another. It is an increasingly important part of modern life, enabling people to travel, work, and communicate from any location at any time. This is made possible through advancements in technology, such as the internet, mobile phones, and transportation.
Goo gle Chrome is one of the most popular browsers and is known for its speed and security. It also has many features such as a password manager, autofill, and tab grouping. Apple Safari is the default browser for iOS devices and is optimized for mobile use. It also has a range of privacy features, such as Intelligent Tracking Prevention, that help keep user data safe. Additionally, Safari is very fast and easy to use. From my own experience, I find both of these browsers to be reliable and user-friendly. They are also both very secure, so Yasmin can feel confident that her data is safe when researching topics.
To learn more about mobile
https://brainly.com/question/15364920
#SPJ1
Which of the following policies should be adopted to help reduce increasing congestion caused by devices attempting to resend lost packets too quickly or too often?
Retransmission policy
Window policy
Discarding policy
Admission policy
The retransmission policy should be adopted to help reduce the increasing congestion caused by devices attempting to resend lost packets too quickly or too often.
A retransmission policy is a technique that requires the sending of packets until an acknowledgment is received from the receiver. When a packet is sent, it is kept in the queue until an acknowledgment is obtained. If no acknowledgment is obtained, the packet is considered lost and is retransmitted.
This cycle of sending and resending packets causes congestion in the network. As a result, the retransmission policy should be implemented to reduce congestion caused by devices that attempt to resend lost packets too frequently or too quickly.
The issue of too many packets present in the network at the same time, slowing data transmission and affecting the quality of service, is known as congestion. Congestion causes packet loss, slows data transmission, and lowers service quality, which affects the user experience. The following are some common sources of network congestion:
Too much traffic in the network.Failure to keep up with traffic spikes.Network devices' processing power is limited.Poor network design.Packet loss occurs when one or more packets of data traveling through a network do not reach their intended destination. It may be caused by network congestion, poor network design, hardware failure, or packet corruption. When packet loss occurs, the data contained in the packet must be resent, resulting in increased network traffic, delays, and poor service quality.
You can learn more about retransmission at: brainly.com/question/28274178
#SPJ11
A systems administrator wants to conduct a scan to identify which services are open on their machines in an attempt to try to disable unused services. Which of the following should they perform?
Question options:
- UDP scan
- NSE scan
- TCP scan
- OS scan
- Ping scan / sweep
The correct answer is To identify which services are open on their machines and disable unused services, the systems administrator should perform a TCP scan.
A TCP scan is a type of port scan that uses the Transmission Control Protocol (TCP) to check whether a port is open or closed. By scanning TCP ports, the systems administrator can identify which services are running on their machines and determine which ones are not being used, allowing them to disable any unnecessary services and improve the security and performance of their system. A UDP scan, on the other hand, is used to identify open User Datagram Protocol (UDP) ports, which are often used for non-critical services that do not require a reliable connection. An NSE (Nmap Scripting Engine) scan is used to gather additional information about the target system, while an OS scan is used to identify the operating system running on the target system. A ping scan/sweep is used to check whether a host is up or down. In summary, the systems administrator should perform a TCP scan to identify which services are open on their machines and disable any unused services to improve the overall security and performance of their system.
To learn more about TCP scan click on the link below:
https://brainly.com/question/13068617
#SPJ1
Ain) is a special value that cannot be mistaken as a member of a list of data items and signals that there are no more data items to be processed a. terminator b. accumulator c. sentinel d. delimiter
The special value that cannot be mistaken as a member of a list of data items and signals that there are no more data items to be processed is called a sentinel. Therefore, the correct option is option (c).
What's sentinel valueThe sentinel value is normally used to indicate the end of a data sequence. It is a special value that indicates that there are no more data items to be processed, making it distinguishable from the rest of the values.The function of the sentinel value is to avoid the requirement of a counter or an exact count of data items that will be entered.
It allows for the entry of an unknown number of items, hence improving the program's flexibility and user-friendliness.In conclusion, the sentinel value is used to represent the end of the sequence of data items so that the program can know when to stop reading input.
Learn more about sentinel value at
https://brainly.com/question/30266317
#SPJ11
tracy works for an insurance company that recently received so much spam that the email server became overwhelmed and shut down. tracy's supervisor has asked her to make sure this does not happen again. What is the first thing Tracy should do to prevent this problem from happening again?
User education
MAC filtering
Firewall
Email filtering
Answer:
Tracy's first line of defense against this problem coming back should be to use email filtering. Email filtering is the process of sorting and filtering incoming emails based on things like sender, subject, content, attachments, and other factors so that unwanted or suspicious emails can be found and blocked. These can include spam, phishing, malware, and other types of malicious emails that overload the email server and cause it to crash.
By turning on email filtering, Tracy can help stop unwanted emails from getting into the email server and causing problems. She can also change the filtering settings to stop emails from senders or sites that are known to send spam or other unwanted messages from getting through. Tracy might also change the email filtering settings often to keep up with new spamming techniques and types of threats.
Email filtering is often the best first line of defense against too much email and spam attacks, even though user education, MAC filtering, and firewalls can also help stop spam and other problems related to email.
page of 7 zoom cs 280 spring 2023 programming assignment 1 building a lexical analyzer for the spl language february 16, 2023 due date: sunday, march 5, 2023, 23:59 total points: 20 in this programming assignment, you will be building a lexical analyzer for small programming language, called simple perl-like (spl), and a program to test it. this assignment will be followed by two other assignments to build a parser and an interpreter to the spl language. although, we are not concerned about the syntax definitions of the language in this assignment, we intend to introduce it ahead of programming assignment 2 in order to determine the language terminals: reserved words, constants, identifier(s), and operators. the syntax definitions of the spl language are given below using ebnf notations. however, the details of the meanings (i.e. semantics) of the language constructs will be given later on. 1. prog ::
The syntax rules for the SPL language should be defined using EBNF notations.
What is the purpose of creating a lexical analyzer for the SPL language?
The SPL language is a small programming language that requires a lexical analyzer, parser, and interpreter to function. The lexical analyzer is the first component in this process, and its purpose is to analyze the input program and break it down into smaller tokens that can be used by the parser.
The lexical analyzer for the SPL language should be designed to identify and differentiate between different types of tokens, such as keywords, identifiers, constants, and operators. Keywords are reserved words that have a predefined meaning in the SPL language, while identifiers are used to define variable and function names.
Constants in the SPL language can be integer, Boolean, or string literals, and they are used to represent fixed values that do not change during program execution. Operators in the SPL language are used to perform operations on different types of data, such as assignment (=), comparison operators (== and !=), and logical operators (not, or, and).
The extended Backus-Naur form (EBNF) is used to define the syntax rules for the SPL language. The syntax rules define the structure and organization of the language constructs and specify how different tokens can be combined to form valid SPL programs.
In summary, the purpose of creating a lexical analyzer for the SPL language is to break down the input program into smaller tokens that can be used by the parser to generate a parse tree. The lexical analyzer should be designed to identify different types of tokens, such as keywords, identifiers, constants, and operators, and the syntax rules for the SPL language should be defined using EBNF notations.
Learn more about SPL language
brainly.com/question/30888132
#SPJ11
to find a full list of policies and preferences that can have background processing disabled, where should you look?
When you need to locate a complete list of policies and preferences that can have background processing disabled, you should look for the "administrative templates for Windows 10 Version 1809" in the Microsoft download center.
What is the full list?The full list includes Group Policy templates that are needed for configuring policy settings. To find a full list of policies and preferences that can have background processing disabled, look for the "administrative templates for Windows 10 Version 1809" in the Microsoft download center. This contains Group Policy templates that are required for configuring policy settings.
Group Policy is a Windows tool for managing many Windows components, including background processing. Administrative templates are used to configure and handle these policies. However, the set of preferences and policies will differ depending on the Windows edition.
To use group policy templates, you need a domain controller in your network. Group Policy templates that are available for download include: Administrative Templates (.admx) for Windows 10 version 1809 and Windows Server 2019 Administrative Templates (.admx) for Windows 10 version 2004 and Windows Server version 2004 Administrative Templates (.admx) for Windows 10 version 20H2 and Windows Server version 20H2Administrative Templates (.admx) for Windows 11 Group Policy
Learn more about administrative templates here:
https://brainly.com/question/30778834
#SPJ11
how does technological change affect the per-worker production function?
The function of production per worker can be significantly impacted by technological progress.
The introduction of new technology or the enhancement of existing technology is referred to as technological change. This can have an impact on a variety of societal factors, including enterprises, economies, and people's daily lives. Technology developments have the potential to create new sectors, disrupt those that already exist, and improve output quality, productivity, and efficiency. The information and skills needed by workers may change as a result of technological advancements, which may alter the job market and necessitate further education and training. But technology advancement can also result in problems like lost jobs and a rise in economic inequality.
Learn more about technological progress here:
https://brainly.com/question/903338
#SPJ4