The element potassium (K) has an atomic number of 19 and its electron configuration does not begin with the argon core, instead beginning with 4s1. the correct answer is potassium (K).
The electron configuration of an element specifies the number of electrons in each of its atomic orbitals. The elements on the periodic table are arranged in order of increasing atomic number, which corresponds to the number of protons and electrons in the nucleus of an atom. Elements with an atomic number higher than 18, such as scandium (Sc), manganese (Mn), and chlorine (Cl), have electron configurations that begin with the noble gas argon (Ar) core of [Ar]3d10 4s2. However, the element potassium (K) has an atomic number of 19 and its electron configuration does not begin with the argon core, instead beginning with 4s1.
Therefore, the correct answer is potassium (K).
For more such questions on electron configuration
https://brainly.com/question/26084288
#SPJ11
what does 2NaOH equal
use the trendline equation in fig6.2 to determine the kelvin temperature at which the pressure equals .72 atm
When the pressure is 0.72 atm, the temperature in Kelvin is 156 K.
To determine the Kelvin temperature when the pressure is 0.72 atm, you will need to use the trendline equation given in Fig 6.2. First, find the equation of the trendline by using the graph's two points, (300 K, 1 atm) and (500 K, 2 atm).
The equation for the trendline is:
y = mx + b
Where y is pressure, x is the temperature in Kelvin, m is the slope, and b is the y-intercept. We can find the slope of the trendline by using the two points provided in the graph:
Slope (m) = (y2 - y1) / (x2 - x1)
Slope = (2 atm - 1 atm) / (500 K - 300 K)
Slope = 0.005 atm/K
The equation for the trendline can now be written: y = 0.005x + b. To find the y-intercept, b, we can use one of the two points: Solving for b:
1 atm = 0.005(300 K) + bb = 1.5 atm
Now we can use the equation for the trendline to find the temperature (x) at which the pressure (y) equals 0.72 atm:
0.72 atm = 0.005x + 1.5 atm
0.72 atm - 1.5 atm = 0.005x
-0.78 atm = 0.005xx
= -0.78 atm / 0.005x
= 156K
To learn more about Pressure :
https://brainly.com/question/24719118
#SPJ11
What is the experimental mole ratio of baking soda (NaHCO3 ) to sodium chloride (NaCl)?
Answer: 1:1
Explanation:
Since Na trades place with Na it makes it 1:1
How many calories are required to raise the temperature of a 35.0 g sample from 35 °C to 85 °C? The sample has a specific heat of 0.108 cal/g °C.
Answer:
First, we need to calculate the change in temperature:
ΔT = final temperature - initial temperature
ΔT = 85 °C - 35 °C
ΔT = 50 °C
Next, we can use the following formula to calculate the heat energy required:
Q = m·C·ΔT
where Q is the heat energy in calories, m is the mass of the sample in grams, C is the specific heat in cal/g °C, and ΔT is the change in temperature in °C.
Plugging in the given values, we get:
Q = 35.0 g · 0.108 cal/g °C · 50 °C
Q = 189.0 calories
Therefore, 189.0 calories are required to raise the temperature of the sample from 35 °C to 85 °C
Assuming that all is working properly, which of the following is at a higher energy level?
If all is working correctly, the electron in a higher orbital or shell will have more energy than the electron in a lower orbital or shell. The following statement is correct: The electron that is farther away from the nucleus is at a higher energy level.
In order for the electron to escape from the atom, it must be excited, meaning that it must absorb energy. When this occurs, the electron moves to a higher energy level, which is farther from the nucleus. Because the electron is now in an excited state, it is more vulnerable to being released from the atom if additional energy is provided to it. According to Bohr's model of the atom, electrons revolve around the nucleus in circular orbits with varying energy levels. As the distance between the nucleus and the electron increases, so does the energy level of the electron. The energy of electrons in the first energy level is the lowest, and as the energy level increases, so does the energy of electrons. As a result, electrons in the outermost shell have the highest energy levels.
To learn more about Nucleus :
https://brainly.com/question/9651421
#SPJ11
Carefully compare the real bond angles and model bond angles from your
data in part A. Also note any patterns you see between bond angles and
the number of lone pairs in a molecule. Which statements explain the
patterns you see?
A few common aspects to take into account, including the size of the participating atoms, the existence of lone pairs, numerous bonds, big groups connected to the core atom, or the environment the molecule is situated in
What is the relationship between any bond and any lone pair?The orbitals that lone couples are in are smaller & rounder than orbitals that bonded pairs are in. Because of this, a bonding pair and a lone pair repel one another more strongly than two bonding pairs do. This significantly compresses the bonding pairs, lowering the b.ed from 109.5° to 107°.
How is the molecule and electron geometry impacted by the amount of electron pairs and bonds?Trigonal pyramidal molecular geometry results from having three bond pairs and one lone pair of atoms (e.g. NH3). The geometry of the molecule is angular or curved when there's covalent bond pairs and three single electron pair pairs (e.g. H2O).
To know more about core atom visit:
https://brainly.com/question/17101420
#SPJ1
The SI unit of pressure is the _______.
The boiling point of water is _______ on Mount McKinley than the boiling point of water in NYC.
At lower elevations, atmospheric pressure _______ compared to higher elevations.
Standard atmosphere or standard atmospheric pressure is equal to _______ Pa.
The SI unit of pressure is the Pascal (Pa).
The boiling point of water is lower on Mount McKinley than the boiling point of water in NYC.
What is Pressure?
Pressure is defined as the amount of force applied perpendicular to the surface of an object per unit area over which that force is distributed. In other words, it is the force per unit area that an object exerts on another object. Pressure can be measured in various units such as pascal (Pa), bar, pounds per square inch (psi), and atmospheres (atm), among others. It is an important concept in physics and is used to describe many phenomena, including fluid dynamics, weather patterns, and even the behavior of gases in space.
At lower elevations, atmospheric pressure is higher compared to higher elevations.
Standard atmosphere or standard atmospheric pressure is equal to 101325 Pa.
Learn more about Pressure from given link
https://brainly.com/question/28012687
#SPJ1
Find the mass of 2 moles of carbon tetrachloride
Answer:
The mass of 2 moles of carbon tetrachloride is
307.646 grams
Explanation:
The chemical formula for Carbon tetrachloride is [tex]\ce{CCl_4}[/tex]. It contains 1 carbon atom and 4 chlorine atoms.
Carbon tetrachloride is formed due to the covalent bond between one carbon atom with four chlorine atoms.
In order to find the mass of 2 moles of [tex]\ce{CCl_4}[/tex] we need to determine the molar mass.
The molar mass of carbon is 12.011 g/mol.
The molar mass of chlorine is 35.453 g/mol.
As stated before we have 1 carbon atom and 4 chlorine atoms. So the molar mass can be evaluated by
[tex]\left(1*12.011\right)+\left(35.453*4\right)=153.823[/tex]
The molar mass of [tex]\ce{CCl_4}[/tex] is 153.823 g/mol.
You can multiply that by 2 to get the mass in grams of 2 moles of carbon tetrachloride.
[tex]2*153.823 =307.646[/tex]
Learn more about covalent bonds here
https://brainly.com/question/28808905
Think of ten animals, and create a diagram showing which animals they might have evolved from and which animals they might be similar to. Put those animals into at least 3 groups.
This is just one possible way to group and diagram the evolutionary relationships between these animals.
What is evolution?
Evolution is the process of change in the inherited characteristics of biological populations over successive generations. Evolutionary changes occur through a variety of mechanisms, including natural selection, genetic drift, gene flow, and mutations. Over time, these changes can result in the emergence of new species or the extinction of existing ones. Evolutionary theory provides an explanation for the diversity of life on Earth and has been supported by a vast amount of scientific evidence from multiple disciplines, including genetics, paleontology, and comparative anatomy. The theory of evolution by natural selection, developed by Charles Darwin and Alfred Russel Wallace in the mid-19th century, remains the fundamental concept in evolutionary biology.
Here is a diagram showing the possible evolutionary relationships between ten animals, along with their similarities:
Group 1: Mammals
Humans: Evolved from primates, similar to apes and monkeys
Elephants: Evolved from proboscideans, similar to mammoths and mastodons
Dolphins: Evolved from land mammals, similar to whales and porpoises
Group 2: Birds
Eagles: Evolved from theropod dinosaurs, similar to hawks and falcons
Penguins: Evolved from non-avian dinosaurs, similar to auks and puffins
Group 3: Reptiles and Amphibians
Crocodiles: Evolved from archosaurs, similar to alligators and caimans
Snakes: Evolved from lizards, similar to boas and pythons
Frogs: Evolved from fish, similar to toads and salamanders
Group 4: Insects
Bees: Evolved from wasps, similar to bumblebees and hornets
Butterflies: Evolved from moths, similar to skippers and hair streaks
Note: This is just one possible way to group and diagram the evolutionary relationships between these animals. There are many different ways to classify and categorize animals based on their evolutionary history and characteristics.
To know more about animals visit:-
https://brainly.com/question/25897306
#SPJ1
Do electron pair geometry of Carbonothioyl dibromide please
Answer:
See below.
Explanation:
To determine the electron pair geometry of Carbonothioyl dibromide, we need to first draw its Lewis structure:
Br Br
\ /
C=S
/
Br Br
Carbonothioyl dibromide has four electron groups around the central sulfur atom: two single bonds with the two bromine atoms, one double bond with the carbon atom, and one lone pair of electrons on the sulfur atom.
Using VSEPR theory, we can predict the electron pair geometry by considering both the bonding and the lone pairs of electrons. In this case, the electron pair geometry of Carbonothioyl dibromide is tetrahedral because it has four electron groups around the central sulfur atom.
However, the molecular geometry of Carbonothioyl dibromide is trigonal pyramidal due to the presence of one lone pair of electrons on the sulfur atom.
What is a vapor?
A. A substance that is in the gas phase at a temperature at which it
would normally be a solid or liquid
B. A substance that has a much higher melting point and boiling point than other similar substances
C. A substance that forms a gas, but only at very high temperatures
D. A substance that is always in the solid or liquid phase at room
temperature
Answer:
C
Explanation:
PHYSICS
a gaseous substance that is below its critical temperature, and can therefore be liquefied by pressure alone.
what is the following reaction classified as? acetal hydrolysis imine hydration imine hydrolysis enamine hydrolysis enamine hydration
The given reaction is classified as enamine hydrolysis. Enamine hydrolysis is a type of reaction that involves the hydrolysis of an imine group, leading to an aldehyde or ketone product. Option C.
The reaction proceeds by first forming an enamine intermediate by condensing an amine with an aldehyde or ketone, followed by an acid-catalyzed hydrolysis of the imine to produce a ketone or aldehyde product. The reaction can also be catalyzed by a base, although this is less common.
In the given reaction, an imine is hydrolyzed, resulting in an aldehyde or ketone product. The imine is formed when an amine reacts with an aldehyde or ketone, and the reaction of the imine with water is catalyzed by an acid. This reaction is known as enamine hydrolysis. Option C.
For more such questions on hydrolysis
https://brainly.com/question/31184126
#SPJ11
the electron configuration of nitrogen is 1s^2 2s^2 2p^3. how many electrons are present in an atom of nitrogen? what is the atomic number for nitrogen?
Since the electronic configuration of nitrogen is 1s² 2s² 2p³, the number of electrons present in the nitrogen atom is 7, and the atomic number of nitrogen is also seven (7).
The atomic number of an atom is the number of protons in the nucleus of an atom. The number of protons defines the properties of an element. For example, if an element with 5 protons is boron atom.
The electronic configuration of an atom represents the number of electrons in each sub-energy level of the atom in the ground state.
The electronic configuration of nitrogen is 1s²2s²2p³. As you know, the electrons around the nucleus are located in energies or levels. Therefore, from the definition of electron configuration, we can say that the nitrogen atom has 2 electrons in the first energy level K of the s-subshell, and in the s-subshell and the p subshell of the second energy level L, respectively There are 2 or 3 electrons.
Therefore, the total number of electrons in the nitrogen atom is 7 (2 + 2 + 3). We know that the number of protons = the number of electrons, so the number of protons in the nitrogen nucleus is 7. Therefore, the nitrogen atom has an atomic number of 7.
For more information about electronic configuration, visit :
https://brainly.com/question/21977349
#SPJ4
If a vinegar solution contains 0.26 mole of acetic acid (HC₂H₃O₂) and has a total mass of 31.5g, what is mass percent of the solution? (Hint: you need to calculate the mass of the solute (acetic acid) first).
The mass percent of the solution can be calculated using the following formula and the value we got is 49.3%.
What is mass percent?Mass percent, also known as percent by mass or weight percent, is a way of expressing the composition of a mixture in terms of the mass of each component. It is calculated by taking the total mass of the mixture and dividing it by the mass of one component, then multiplying the result by 100%. Mass percent is often used to describe the concentration of a solution, as it gives the proportion of the solution that is composed of a particular component. For example, a solution with a mass percent of 10% of salt means that 10g of salt is present for every 100g of solution.
The mass of the solute (acetic acid) can be calculated using the molar mass of acetic acid, which is 60.05 g/mol.
0.26 mol acetic acid X (60.05 g/mol) = 15.51 g acetic acid
The mass percent of the solution can be calculated using the following formula:
(Mass of solute/Total mass) X 100 = Mass percent
(15.51 g/31.5 g) X 100 = 49.3%.
To learn more about mass percent
https://brainly.com/question/4336659
#SPJ1
Help I don’t know what I am doing
When a particle undergoes beta decay, its atomic number increases by one.
The balanced equation of the beta decay of uranium-235 is given below:
²³⁵₉₂U ---> ⁰₋₁e + ²³⁵₉₃Np
What is beta decay?Beta decay is a type of radioactive decay that occurs when a nucleus emits a beta particle, which is an electron or a positron. During beta decay, a neutron or a proton inside the nucleus is transformed into the opposite type of particle.
In beta minus decay, a neutron in the nucleus is transformed into a proton, which remains in the nucleus, while an electron and an antineutrino are emitted. The electron is known as a beta particle.
In beta plus decay, also called positron emission, a proton in the nucleus is transformed into a neutron, which remains in the nucleus, while a positron and a neutrino are emitted. The positron is also known as a beta particle, but it has a positive charge.
Learn more about beta decay at: https://brainly.com/question/13174032
#SPJ1
According to the Bronsted-Lowry concept of acids and bases, which of the following statements about a base is NOT true? If a base is strong, then its conjugate acid will be relatively weaker. A base must contain a hydroxide group. A base will share one of its electron pairs to bind H+. A base reacts with an acid to form a salt.
According to the Bronsted-Lowry concept of acids and bases, the statement "If a base is strong, then its conjugate acid will be relatively weaker" is NOT true.
The Bronsted-Lowry concept defines an acid as a proton (H+) donor and a base as a proton acceptor. The strength of an acid or base is determined by the extent to which it is willing to donate or accept a proton. Therefore, when a strong acid donates a proton, the resulting conjugate base is also strong; likewise, when a strong base accepts a proton, the resulting conjugate acid is also strong.
Other characteristics of bases include the presence of a hydroxide group (OH-), and the ability to accept a proton (H+) to form a salt. However, the strength of a base does not necessarily depend on its presence or absence of a hydroxide group.
In conclusion, the Bronsted-Lowry concept of acids and bases states that the strength of a base does not determine the strength of its conjugate acid; therefore, the statement "If a base is strong, then its conjugate acid will be relatively weaker" is NOT true.
For more such questions on Bronsted-Lowry
https://brainly.com/question/24098522
#SPJ11
Chemistry Help Please! It's worth a lot of points
1.Write the equilibrium expression for the following reactions
a. H2SO4(aq) + H2O(L) ⇆ HSO4-(aq) + H3O+(aq)
b. 4NH3(g) + 5O2(g) ⇆ 4NO(g) + 6H2O(g)
c. NH4Cl(s) ⇆ NH3(g) + HCl(g)
d. N2O4(g) ⇆ 2NO2(g)
2. The following reaction has a K value of 0.050. What does that mean about the concentrations of the reactants as compared to the products? Be specific in your answer.
N2(g) + 3H2(g) ⇆ 2NH3(g)
3. The following reaction has a K value of 6.8 x 103. What does that mean about the concentrations of the reactants as compared to the products? Be specific in your answer.
2SO3(g) ⇆ 2SO2(g) + O2(g)
4. When dissolving substances in water, the degree of solubility of a substance is often represented as the solubility product constant (Ksp). The solubility product constant is the same thing as the equilibrium constant for the dissolving reaction. Two substances that dissociate in water are shown below alone with the Ksp.
NaCl(s) ⇆ Na+(aq) + Cl-(aq) Ksp = 36
BaSO4(s) ⇆ Ba2+(aq) + SO42-(aq) Ksp = 1.1 x 10-16
5. Identify and label the Brønsted-Lowry acid, its conjugate base, the Brønsted-Lowry base, and its conjugate acid in each of the following equations:
a. HNO3 + H2O ⟶ H3O+ + NO3−
b. CN− + H2O ⟶ HCN + OH−
c. H2SO4 + Cl− ⟶ HCl + HSO4−
d. HSO4− + OH− ⟶ SO42− + H2O
e. O2− + H2O ⟶2OH−
6. What is the conjugate acid of each of the following? What is the conjugate base of each of the following?
a. OH-
b. H2O
c. HCO3-
d. NH3
e. HSO4-
7. The following acids are shown with their equilibrium constants (also known as the acid dissociation constant). Rank these acids from strongest to weakest. Explain your ranking.
HCN(aq) + H2O(L) ⇆ H3O+(aq) + CN-(aq) K = 6.2 x 10-10
HC2H3O2(aq) + H2O(L) ⇆ H3O+(aq) + C2H3O-(aq) K = 1.75 x 10-5
H2CO3(aq) + H2O(L) ⇆ H3O+(aq) + HCO3-(aq) K = 4.5 x 10-7
HIO4(aq) + H2O(L) ⇆ H3O+(aq) + IO4-(aq) K = 2.3 x 10-2
8. Calculate the pH and the pOH of each of the following solutions.
a. 0.200 M HCl
b. 0.0143 M NaOH
c. 3.0 M HNO3
d. 0.0031 M Ca(OH)2
9. Wine has a pH of 3.6. What are the hydronium and hydroxide ion concentrations?
10. The hydroxide ion concentration in household ammonia is 3.2 x 10-3 M. What is the concentration of hydronium ions?
Answer:
1. Equilibrium expressions:
a. K = [HSO4-][H3O+]/[H2SO4][H2O]
b. K = [NO]^4[H2O]^6/[NH3]^4[O2]^5
c. K = [NH3][HCl]/[NH4Cl]
d. K = [NO2]^2/[N2O4]
2. Since K = 0.050, the concentrations of the reactants (N2 and H2) are larger than the concentrations of the products (NH3).
3. Since K = 6.8 x 10^3, the concentrations of the products (SO2 and O2) are larger than the concentrations of the reactant (SO3).
4. The Ksp expression for each of the reactions is:
a. Ksp = [Na+][Cl-]
b. Ksp = [Ba2+][SO42-]
5. Brønsted-Lowry acids and bases:
a. Acid: HNO3; Conjugate base: NO3-; Base: H2O; Conjugate acid: H3O+
b. Acid: HCN; Conjugate base: CN-; Base: H2O; Conjugate acid: HCN
c. Acid: H2SO4; Conjugate base: HSO4-; Base: Cl-; Conjugate acid: HCl
d. Acid: NH3; Conjugate base: NH2-; Base: H2O; Conjugate acid: NH4+
e. Acid: H2O; Conjugate base: OH-; Base: O2-; Conjugate acid: OH-
6. Conjugate acids and bases:
a. Acid: H2O; Conjugate base: OH-
b. Acid: H3O+; Conjugate base: H2O
c. Acid: H2CO3; Conjugate base: HCO3-
d. Acid: NH4+; Conjugate base: NH3
e. Acid: HSO4-; Conjugate base: SO42-
7. The strongest acid is HIO4 (highest K value), followed by HCN, HC2H3O2, and H2CO3 (lowest K value). The K values represent the degree to which the acids dissociate in solution. HIO4 is a strong acid, meaning it dissociates almost completely in solution, while H2CO3 is a weak acid, meaning it only dissociates partially.
8. pH and pOH calculations:
a. pH = -log[H3O+] = -log(0.200) = 0.699; pOH = -log[OH-] = -log(1.0 x 10^-14/0.200) = 12.301
b. pOH = -log[OH-] = -log(0.0143) = 1.844; pH = 14.000 - pOH = 12.156
c. pH = -log[H3O+] = -log(3.0) = 0.522; pOH = 13.478
d. pOH = -log[OH-] = -log(0.0062) = 2.206; pH = 14.000 - pOH = 11.794
9. Hydronium and hydroxide ion concentrations:
pH = 3.6; hydronium ion concentration = 10^-pH = 3.98 x 10^-4 M; hydro
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
List the following compounds from most reactive to least reactive toward electrophilic aromatic substitution. Rank the compounds from most to least reactive. To rank items as equivalent, overlap them. Reset Help toluene benzene ne phenol bromobenzene nitrobenzene
Phenol, toluene, benzene, bromo benzene, and nitrobenzene are the chemicals in this order.
Which aromatic substance reacts least favourably to electrophilic substitution?Due to the M effect, benzosulphonic acid is least reactive in an electrophilic aromatic substitution. Because nitrogen is more electronegative than carbon and functions as an electron withdrawing group, pyridine is less reactive than benzene towards electrophilic aromatic substitution. The meta hydrogen is thus replaced.
Which five electrophilic aromatic substitution reactions occur most frequently?Most beginning organic chemistry courses cover six fundamental electrophilic aromatic substitution reactions: chlorination, bromination, nitration, sulfonation, Friedel-Crafts alkylation, and Friedel-Crafts acylation.
To know more about nitrobenzene visit:-
brainly.com/question/13190784
#SPJ1
5.4 A Sample of sand has a true mass of 1.975g was weighed by six different researchers using the same balance. the following masses were obtained. 1.974g, 1.973g, 1.975g, 1.974g
comment on the precision and accuracy for a sample of sand measurement
The precision of the measurement is very good, measurements are within a very small range of each other. the accuracy of the measurement is not as good since the average measurement was 1.974g while the true mass was 1.975g.
What are precision and accuracy?Precision and accuracy are two important concepts in measurement. Precision is the degree of reproducibility or agreement of a set of measurements. It is usually expressed as the standard deviation of a set of measurements or the coefficient of variation. Accuracy is the degree of closeness to the true or accepted value of a measurement.
It is usually expressed as the difference between the measured value and the true or accepted value.
Learn more about precision and accuracy here:
https://brainly.com/question/5792909
#SPJ1
given the atomic mass of hydrogen is 1 amu, the atomic mass of oxygen is 16 amu, and one molecule of sulfuric acid has a mass of 98 amu, what is the atomic mass of sulfur trioxide?
The atomic mass of sulfur trioxide (SO3) is 82 amu.
How to find the atomic mass of sulfur trioxide ?Sulfur trioxide (SO3) has one sulfur atom and three oxygen atoms.
The atomic mass of sulfur can be calculated by subtracting the total mass of the oxygen atoms in sulfuric acid (3 x 16 amu) from the mass of sulfuric acid (98 amu) and then subtracting the mass of the remaining oxygen atom:
Mass of sulfur = (98 amu - 3 x 16 amu) - 1 x 16 amuMass of sulfur = (98 amu - 48 amu) - 16 amuMass of sulfur = 34 amuThe atomic mass of sulfur is 34 amu.
To find the atomic mass of sulfur trioxide, we add the atomic masses of one sulfur atom and three oxygen atoms:
Atomic mass of SO3 = 1 x 34 amu + 3 x 16 amuAtomic mass of SO3 = 34 amu + 48 amuAtomic mass of SO3 = 82 amuTherefore, the atomic mass of sulfur trioxide (SO3) is 82 amu.
Learn more about sulfur trioxide here : brainly.com/question/1458186
#SPJ1
Use the following data to determine whether the conversion of diamond into graphite is exothermic or endothermic:
C diamond (s) + O2 (g) ? CO2(g) ?H° = -395.4 kJ
2 CO2 (g) ? 2 CO(g)+O2 (g) ?H° = 566.0 kJ
2 CO2(g) ? Cgraphite(s) + CO2 (g) ?H° =-172.5 kJ
Cdiamond (s) ? Cgraphie (s) ?H°= ?
It's a negative value for ∆H°, indicating that the conversion of diamond to graphite releases energy. As a result, it is an exothermic reaction.
The conversion of diamond into graphite is exothermic. The enthalpy change of the reaction is -267.1 kJ.There are three reactions that take place in this process. Cdiamond (s) + O2 (g) → CO2(g) ∆H° = -395.4 kJ2 CO2 (g) → 2 CO(g)+O2 (g) ∆H° = 566.0 kJ2 CO2(g) → Cgraphite(s) + CO2 (g) ∆H° =-172.5 kJCdiamond (s) → Cgraphite (s) ∆H°= ?
The conversion of diamond to graphite is an endothermic process. It has a positive value of ∆H°. Therefore, the heat is absorbed by the surroundings. According to the first two reactions, the formation of CO and CO2 from the combustion of diamonds produces energy.
The net reaction for the conversion of diamond to graphite takes place as follows:
Diamond (s) + 2 O2(g) → Cgraphite (s) + 2 CO2 (g)
The energy change for this reaction can be determined by combining the above three reactions. The enthalpy change is obtained by subtracting the sum of the enthalpies of the reactants from the sum of the enthalpies of the products. The enthalpy change of the reaction is calculated as follows:
∆H°=ΣH°(products)−ΣH°(reactants)
∆H°=(−172.5)+(2×−393.5)+(566.0)−[(0)+(0)+(-395.4)+(2×0)]
∆H°=−267.1 kJ
To learn more about Exothermic reaction :
https://brainly.com/question/2924714
#SPJ11
Which of the following substances has the greatest solubility in water? BaF2, Kp = 1.5 x 10-6 Ca(OH)2, Ksp - 6,5 x 10-6 SrCros. Ksp = 2.2 x 10-5 Ag2SO4, Ksp - 1.5 x 10-5 Zn(103)2, Ksp = 3.9 x 10-6
The substance with the greatest solubility in water is Ag2SO4, with a Ksp of 1.5 x 10-5.
The solubility of a substance is determined by its solubility product constant (Ksp). The higher the Ksp value, the more soluble the substance is in water.
Ksp is the equilibrium constant for a slightly soluble salt in a saturated solution. It is used to calculate the maximum concentration of ions in a solution at equilibrium. When a solid salt dissolves in water, it dissociates into its constituent ions.
The given values of Ksp for the substances are as follows:
BaF2, Kp = 1.5 x 10^-6
Ca(OH)2, Ksp - 6.5 x 10^-6
SrCros. Ksp = 2.2 x 10^-5
Ag2SO4, Ksp - 1.5 x 10^-5
Zn(103)2, Ksp = 3.9 x 10^-6
For more question on solubility click on
https://brainly.com/question/24057916
#SPJ11
draw the possible e1 product(s) for the following reactions. do not draw the leaving group or counterion. ignore zaitsev's rule.
The possible e₁ product of the given reaction is given below in the image format.
Alkene products are produced in mixes via the elimination process. According to Zaitsev's rule, base-induced elimination results in the primary alkene product being the more strongly substituted double bond.
An chemical process known as a unimolecular elimination (E1) produces a double bond by removing an H-X substituent from an organic molecule. Because the creation of the carbocation intermediate (similar to an SN1 reaction) from simply the X substituent departing on its own is the reaction's rate-limiting step, it is unimolecular in nature:
A two-step process called an E1 elimination reaction uses a carbocation intermediate:
The elimination of the departing group is the mechanism's initial phase. In this instance, the bromine is the departing group.
The removal of a proton and creation of a double bond constitute the mechanism's second stage. The three substituents on the carbocation in this instance are all equivalent. The mechanism is demonstrated below:
Learn more about E1 products:
https://brainly.com/question/29490944
#SPJ4
whereas the Early transition metal ions are generally quite oxophilic Lewis ligands they coordinate are Lewis A) acids; acids B) bases; bases C) bases; acids D) acids; bases
whereas the Early transition metal ions are generally quite oxophilic Lewis ligands they coordinate are Lewis A) acids; acids
In transition metal complexes, do ligands behave as Lewis acids?When ligands make coordinate bonds with transition metal ions, they form a complex; the transition metal ion functions as a Lewis acid, while the ligand acts as a Lewis base.
Ligands are Lewis bases, which means they have at least one pair of electrons to provide to a metal atom/ion. Ligands are also referred to as complexing agents. Metal atoms/ions are Lewis acids, which means they may take electron pairs from Lewis bases.
According to the Lewis acid-base principle, the electron pair acceptor is known as the Lewis acid. Transition metals are electron-deficient in general and take electrons from ligands.
learn more about Transition metals
https://brainly.com/question/2879928
#SPJ1
All of the following occur when the temperature of the preoptic area of the hypothalamus drops below its thermostat setting, except thata. blood flow to the skin increases.b. shivering thermogenesis occurs.c. nonshivering thermogenesis occurs.d. epinephrine levels rise.e. blood returning from limbs is shunted to deep veins.
The answer to this question is that blood flow to the skin does not increase; instead, it is directed inward to conserve heat.
The preoptic area of the hypothalamus serves as the body's thermostat, and when its temperature drops below the thermostat setting, a number of physiological processes are triggered. A) Shivering thermogenesis occurs, which is the production of heat by muscular contractions, B) Nonshivering thermogenesis occurs, which is the production of heat by increased metabolic activity in brown adipose tissue, C) Epinephrine levels rise to promote the mobilization of glucose from stored energy sources and D) Blood returning from the limbs is shunted to deep veins to conserve heat. However, the answer to this question is that blood flow to the skin does not increase; instead, it is directed inward to conserve heat.
For more such questions on blood flow
https://brainly.com/question/28023997
#SPJ11
I received the answer of 2.0 atm. How did you get 2.6 atm? for the problem of A sample of the inhalation anesthetic gas Halothane, in a 500-mL cylinder has a pressure of 2.3...
If the sample of the inhalation anesthetic gas Halothane, in a 500-mL cylinder has a pressure of 2.3, the pressure is given as 2.6 atm
How to solve for the pressure of the gasWe have the following data to solve the problem with
p1 = 2.3 atm
T1 = 273 K
P2 is unknown
T2 = 273 + 37
= 310 K
To solve further we would have to use the Third gas law. The third gas law or the Gay-Lussacs law tells us that
P1 / T1 = P2 / T2
We would have to put in the values in the formula that we have above
[tex]\frac{2.3 atm}{273K} = \frac{p2}{310}[/tex]
from here would cross multiply
310 * 2.3 = p2 * 273
divide through by 273
713 / 273
P2 = 2.61
The pressure is given as 2.61
Read more on pressure here:https://brainly.com/question/25736513
#SPJ1
3. What happens to some metamorphic rocks as they get closer to molten *
magma?
a. They harden
Ob. They cool off
Oc. They change to igneous
Od. They melt
Answer:
C
,
,
,
,
,
,
,
,
,
,
,
,
,
,,
,
,
b) Write balanced equations for the following reactions:
The complete combustion of pentane.
The incomplete combustion of pentane
The complete combustion of heptane
The incomplete combustion of heptane
Equation for pentane's balanced combustion: C5H12(l) + 8 O2(g) 5 CO2(g) + 6 H2O ( g)
Equation C5H12 O2 CO2 H2O is the result of incomplete pentane combustion.C7H16+11O27CO2+8H2O is the equation of heptane that balances.C7H16+O2CO2+H2O is provided as the product of incomplete combustion. C 7 H 16 + O2 C O 2 + H 2 O.A material quickly reacts with oxygen in the combustion process, producing heat as a byproduct. Fuel is the term for the original substance, and oxidizer refers to the source of oxygen. Yet, for the purpose of propelling an airplane, the fuel is often a liquid.Fuel + O2 CO2 + H2O is the general formula for an entire combustion reaction. It is a combustion reaction when charcoal is burned.For more information on combustion kindly visit to
https://brainly.com/question/15117038
#SPJ1
Calculate the mass of benzene that should be dissolved in 425g of water at 35°C to produce a
solution with a vapor pressure of 36.1 mmHg.
(At 35°C, P0H20 = 42.2mmHg)
The mass of benzene that should be dissolved in 425g of water at 35°C to produce a solution with a vapor pressure of 36.1 mmHg is approximately 10.02 g.
1. Calculate the mole fraction of benzene (Xbenzene) in the solution using the following equation:
Ptotal = Xbenzene x P0benzene + Xwater x P0water
where Ptotal is the total vapor pressure of the solution, P0benzene is the vapor pressure of pure benzene, P0water is the vapor pressure of pure water, and Xwater = 1 - Xbenzene.
Rearranging the equation to solve for Xbenzene:
Xbenzene = (Ptotal - Xwater x P0water) / P0benzene
Substituting the given values:
Xbenzene = (36.1 mmHg - 0.953 x 42.2 mmHg) / 95.1 mmHg
Xbenzene = 0.390
2. Calculate the molality of the solution using the following equation:
molality = moles of solute / mass of solvent in kg
moles of solute = molality x mass of solvent in kg
Substituting the given values:
molality = 0.390 mol / kg
mass of solvent = 425 g = 0.425 kg
moles of solute = 0.390 mol / kg x 0.425 kg
moles of solute = 0.166 mol
3. Calculate the mass of benzene using its molar mass:
mass of benzene = moles of benzene x molar mass of benzene
Substituting the given values:
moles of benzene = 0.166 mol
molar mass of benzene = 78.11 g/mol
mass of benzene = 0.166 mol x 78.11 g/mol
mass of benzene = 12.97 g
However, we assumed that the density of the solution is equal to the density of water, which is not the case. Therefore, we need to adjust the mass of benzene by using the following equation:
mass of benzene = mass of solute / (1 - mass fraction of solute)
4. Calculate the mass fraction of benzene using the mole fraction:
mass fraction of benzene = (Xbenzene x molar mass of benzene) / (Xbenzene x molar mass of benzene + Xwater x molar mass of water)
5. Substituting the given values:
molar mass of water = 18.02 g/mol
mass fraction of benzene = (0.390 x 78.11 g/mol) / (0.390 x 78.11 g/mol + 0.610 x 18.02 g/mol)
mass fraction of benzene = 0.097
Substituting the values in the mass equation:
mass of benzene = 12.97 g / (1 - 0.097)
mass of benzene = 10.02 g
To know more about benzene, visit:
https://brainly.com/question/7284916
#SPJ1
Which of the following are volume ratios from this equation? Select all that apply.
2H2 + O2 --> 2H2O
The volume ratios from the equation 2H2 + O2 → 2H2O are:
2 L H2 : 1 L O2 (or 2 mol H2 : 1 mol O2)1 L O2 : 2 L H2O (or 1 mol O2 : 2 mol H2O)The coefficients in a balanced chemical equation give the ratio of moles of reactants and products. From the equation 2H2 + O2 → 2H2O, we can see that:
2 moles of H2 react with 1 mole of O2 to produce 2 moles of H2O.Therefore, the following volume ratios are valid:
2 L H2 : 1 L O21 L O2 : 2 L H2OWhat are the reactants?
The reactants are the substances that participate in a chemical reaction and are consumed to form new products. In the equation 2H2 + O2 → 2H2O, the reactants are hydrogen gas (H2) and oxygen gas (O2). These reactants undergo a chemical reaction to form water (H2O) as the product.
To know more about reactants, visit:
https://brainly.com/question/17096236
#SPJ1