Answer: because the tablet is already crushed and is easy for the organism to absorb instead of having to break it down
Explanation:
Which is not considered part of the solar system?
Jovian planets
galaxies
terrestrial planets
sun
Galaxies is not the part of the Solar system.
Hence, Option B is correct answer.
What is Solar System ?Solar System is made up of all the planets that revolve around our Sun. Solar System contains eight planets. These planets are Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus and Neptune.
Now lets check all options one by one
Option (A): Jovian Planets
Outer planets are called Jovian planets. These planets are Jupiter, Saturn, Uranus and Neptune. So Jovian Planets are part of the Solar System.
Hence, Option A is incorrect.
Option (B): Galaxies
Galaxy has a black hole at its center. It is a huge collection of dust, billions of star and gas. So galaxies are not a part of the Solar system.
Hence, Option B is incorrect.
Option (C): Terrestrial Planets
Innermost planets in solar system are Terrestrial planets. These planets are Mercury, Venus, Earth and Mars. So Terrestrial planets are part of the Solar system.
Hence, Option C is incorrect.
Option (D): Sun
The Sun is the part of the Solar system as it is the only star in our Solar system. Sun is the center of our Solar system.
Hence, Option D is incorrect.
Thus from the above conclusion we can say that Galaxies is not the part of the Solar system.
Hence, Option B is correct answer.
Learn more about the Solar System here: https://brainly.com/question/13174833
#SPJ1
Complete the charge balance equation for an aqueous solution of h2co3 that ionizes to hco−3 and co2−3.
The relevant coefficients for each species on the right side of the equation in order to balance the charges.
We can add a coefficient of 2 to HCO³⁻ and a coefficient of 1 to CO3- because the charges must cancel out: H₂CO₃ ⇌ 2HCO³⁻ + CO₃²⁻-
The charges balance is now: No initial charge
Charge total: 2(-1) + (-2) = -4
Due to the balance of the charges, the charge balance equation is as follows: H₂CO₃ ⇌ 2HCO³⁻- + CO₃²⁻.
,Thus, The charge balance equation is as follows: H₂CO₃ ⇌ 2HCO³⁻- + CO₃²⁻.
Learn more about Balance equation, refer to the link:
https://brainly.com/question/7181548
#SPJ12
What is occurring when reactants are mixed and heated and liquid collects in the sidearm of the apparatus
When reactants are mixed and heated and liquid collects in the sidearm of the apparatus, a chemical reaction is occurring.
What is a chemical reaction?A chemical reaction is said to occur when reactants are combined to form products. We must note that the formation of products is evidenced by;
Appearance of a liquidAppearance of a gas Appearance of a solidHence, when reactants are mixed and heated and liquid collects in the sidearm of the apparatus, a chemical reaction is occurring.
Learn more about chemical reaction:https://brainly.com/question/22817140
#SPJ1
Identify the products of the reaction between 2KOH and H₂SO4.
O KSO and H2₂O
OK2SO4 and H₂O
O H₂O and K₂SO4
O KH2 and SO4
Answer:
C.) H₂O and K₂SO₄
Explanation:
This appears to be a double-displacement reaction. In these reactions, the cation of one substance is swapped with the cation of another.
So, K⁺ from KOH is swapped with the H⁺ from H₂SO₄. The new compounds should have an overall charge of 0. Therefore, it may be necessary to modify the amount of each ion (not just be 1:1).
K₂SO₄
-----> K⁺ and SO₄²⁻
-----> + 1 + 1 + (-2) = 0
H₂O
-----> H⁺ and OH⁻
-----> + 1 + (-1) = 0
_____ was the first expert system developed to determine the chemical structure of molecules.
Answer:
Dendral was the first expert system developed to determine the chemical structure of molecules.
Which fundamental mechanisms appear in the reaction between pyridinium chlorochromate and a secondary alcohol
The idea is to foretell the formation of a carbonyl compound by the reaction between alcohol and too much pyridinium chlorochromate. An oxidizing agent called pyridinium chlorochromate converts the alcohol group into the 1carbonyl group.
The carbonyl molecule that results from the reaction will depend on the reactant's OH group. Pyridinium chlorochromate [PCC] converts primary OH to aldehydes, whereas it converts secondary OH to ketones, and oxidation of tertiary OH has little effect. Alcohols and pyridinium chlorochromate [PCC] react to create a carbonyl molecule.
From primary alcohols to aldehydes and from secondary alcohols to ketones, pyridinium chlorochromate oxidizes alcohols one step up the oxidation ladder. pyridinium chlorochromate will not oxidize aldehydes to carboxylic acids, in contrast to chromic acid. Comparable to Pyridine (the Collins reagent) and CrO3 will both oxidize primary alcohols to aldehydes. Here are two instances of pyridinium chlorochromate being used.
To learn more about pyridinium chlorochromate please visit -
https://brainly.com/question/14019316
#SPJ4
What do you think the elements that are in the same group or period on the periodic table have in common?
chemical properties and same number of shell
Explanation:
elements in the same group have the same number of eletrons in their outermost shell and hence have the same chemical properties
An iron bar at 200°c is placed in thermal contact with an identical iron bar at 120°c in an isolated system. after 30 minutes, both iron bars are at 160°c. if the iron bars were placed in thermal contact in an open system instead of an isolated system, how would the results be different? assume that the room temperature is 25°c.
When enzyme activity rate has reached stability, an increase in the enzyme concentration will.
When enzyme activity rate has reached stability, an increase in the enzyme concentration will not make any difference in the enzyme rate.
What is an enzyme?Enzyme are proteins that act as biological catalysts.
How is enzyme activity measured?Enzyme activity is measured in micromoles of substrate converted (or product generated) per minute, which represents the rate of reaction catalyzed by that enzyme.
The activity an enzyme catalyzes in a reaction is a measure of how much of it is present. Numerous variables, including temperature, pH, and others, have an impact on the connection between activity and concentration.Every time an enzyme's concentration rises, so does its activity. This is as a result of the availability of additional enzymes to bind to the substrate. The reaction time quickens as a result. Increasing the concentration of the enzyme will quicken the reaction as long as there is a substrate for it to bind to.To learn more about enzyme activity visit:
https://brainly.com/question/13825485
#SPJ4
When enzyme activity rate has reached stability, an increase in the enzyme concentration will not make any difference in the enzyme rate.
What is an enzyme?
Enzymes are proteins that act as biological catalysts.
How is enzyme activity measured?Enzyme activity is measured in micromoles of substrate converted (or product generated) per minute, which represents the rate of reaction catalyzed by that enzyme.
The activity an enzyme catalyzes in a reaction is a measure of how much of it is present.Numerous variables, including temperature, pH, and others, have an impact on the connection between activity and concentration.Every time an enzyme's concentration rises, so does its activity.This is as a result of the availability of additional enzymes to bind to the substrate.The reaction time quickens as a result.Increasing the concentration of the enzyme will quicken the reaction as long as there is a substrate for it to bind to.To learn more about enzyme activity visit:
brainly.com/question/13825485
#SPJ4
A radioisotope decays, producing an alpha particle and th-234. the original radioisotope must have been an atom of?
If the product of the process is Th-234, the we now know that the original atom must be U-238.
What is an alpha decay?An alpha decay is said to occur when there is the loss of an alpha particle from an atom. Now we know that when there is a loss of an alpha particle, the mass number is decreased by 4 four units while the atomic number is decreased by two units.
If the product of the process is Th-234, the we now know that the original atom must be U-238. It is found two places after the thorium atom in the periodic table.
Learn more about alpha decay:https://brainly.com/question/27870937
#SPJ1
Place the items in order from lowest to highest degree of internal organization
The order of internal organization from lowest to highest degree is; cell < tissue < organ < organ system
What is the order of organization?The complexity of the parts that compose an organism lays the bedrock for the classification of life. Some organisms are composed only of one cell while others are composed of many complex systems.
The order of internal organization from lowest to highest degree is; cell < tissue < organ < organ system
Learn more about organization of life:https://brainly.com/question/12600270
#SPJ1
Missing parts:
Place the items in order from lowest to highest degree of internal organization.
1.organ system
2.tissue
3.cell
4.organ
The function of the heat exchanger in a nuclear reactor is to...
Select one:
a. prevent the leakage of radiation into the environment.
b. convert water into steam, which turns a turbine.
c. cool the reactor water.
d. absorb neutrons to slow down the chain reaction.
Answer:
cool the tractor water system
The table shows the concentration of a reactant in the reaction mixture over a period of time.
Reactant Concentration
Time Concentration
Os 1.8 M
210 s 1.2 M
450 S 0.8 M
580 S 0.6 M
720 s 0.4 M
What is the average rate of the reaction over the first 450 seconds? (3 points)
Ob
Oc
Od
1.7 x 10-3
1.9 x 10-3
2.0 x 10-3
2.2 x 10-3
The average rate of the reaction over the first 450 seconds -2.2×10⁻³ M/s
What is speed?Speed is defined as the rate of change of the distance moved with time. Mathematically, it can be expressed as:
Speed = distance / time
With the above idea, we can obtain the rate of the reaction as illustrated below:
How to determine the rate of the reaction over the first 45osChange in concentration = 0.8 - 1.8 = -1 MTime = 450 sSpeed = ?Rate = Change in concentration / time
Rate = -1 / 450
Rate = -2.2×10⁻³ M/s
Learn more about speed:
https://brainly.com/question/680492
#SPJ1
D is correct for number 2. i just finished
explanation; i got it right
Where is information found concerning acceptable species substitutions for wood materials used in aircraft repair
The list of acceptable species of wood materials used in aircraft structure is found in Table 1-1 on Page 1-2 of AC 43.13-1B.
Which types of wood are used in aircraft repair?Construction of Aircraft with Wood There are four types of wood that are frequently used in the manufacture of aircraft. These include Douglas fir, Sitka spruce, birch, and ash. Additionally, gabon, mahogany, balsa, and pine serve specific purposes. Softwood Sitka Spruce grows in both Canada and the United States of America.
What wood is used for aircraft?Contrary to popular opinion, Howard Hughes' Spruce Goose was made of birch, not spruce, despite the fact that Sitka spruce is the most often used wood in airplanes. Spruce is regarded as the best natural material for building aircraft because it has one of the highest strengths-to-weight ratios.
For more information about wood materials used in aircraft repair please visit:
brainly.com/question/15086416
#SPJ4
An equimolar mixture of two optical isomers is called a ________. An equimolar mixture of two optical isomers is called a ________. enantiomer achiral diastereomer structural isomer racemic mixture
Two optical isomers can form:
An equimolar mixture of two optical isomers is called a racemic mixture.
What is a Racemic mixture?
An equimolar mixture of two enantiomers that is optically inactive is known as a racemic mixture (or racemate) (i.e. does not rotate plane-polarized light).
The racemic mixture can be created by:
Combining enantiomers in equal amounts, or (more frequently) Reactions that create one or more new chiral centers without the influence of chirality (i.e. chiral reagent, catalyst, etc.)The light that is plane-polarized does not spin in an optically inactive mixture.
Since each enantiomer rotates plane-polarized light to an equal and opposite extent, an equimolar mixture of two enantiomers will typically result in a racemic mixture. There won't be any net rotation if they are both present in equal proportions.
Learn more about racemic mixture here,
https://brainly.com/question/27835707
#SPJ4
What is the coefficient for oh−(aq) when s2−(aq) no3−(aq) → s(s) no(g) is balanced in basic aqueous solution?
From the balanced redox equation of the reaction, the coefficient of OH⁻ is 8.
What is the balanced redox equation of the reaction?A redox equation is the equation of a redox reaction in which oxidation and reduction occurs simultaneously.
The given redox reaction takes place in a basic solution
The balanced redox equation of the reaction is given below:
4 H₂O(l) + 3 S²⁻(aq) + 2 NO₃⁻(aq) ---> 3 S(s) + 2 NO + 8 OH⁻(aq)
In conclusion, a redox equation is balanced when oxidation and reduction occur to the same extent.
Learn more about redox equations at: https://brainly.com/question/26750732
#SPJ1
15. What is the mass of mercury in a 250 g fish if the ppm was measured to be 0.23?
Answer: The mass of mercury will be 57.5 micrograms.
The given question deals with Analytical Chemistry where Concentration is asked here.
Concentration: Generally concentration is defined as amount of the substance per unit volume. Concentration is also expressed in parts per million(ppm) when it is a small quantity as in case of mercury content in fish.
Explanation: Given mass of the fish = 250 g,
ppm = 0.23
Now mass of mercury = 0.23 ppm × 250 g
= 0.23/1,000,000 × 250g
=0.23×250/1,000,000 g
= 0.0000575 g
=57.5 micrograms
Reference Link:https://brainly.com/question/12003074
#SPJ2
pls help!! I need the answer to this ASAP
Answer:
I think the element is carbon and the atomic mass is 12.011
Once ____________ bonds form between every fourth amino acid in a polypeptide chain, the chain begins to twist into the ____________ structure known as a(n) ____________ .
Once hydrogen bonds form between every fourth amino acid in a polypeptide chain, the chain begins to twist into the secondary structure known as a(n) alpha helix.
What is Amino Acid ?
Amino acids are organic compound. Amino acids contains amine and carboxyl functional group. Amino acids is the building block of life these are the molecules that combine to form proteins.
What is Polypeptide Chain ?A unique sequence of amino acids joined by peptide bonds is called polypeptide.
Thus from the above conclusion we can say that Once hydrogen bonds form between every fourth amino acid in a polypeptide chain, the chain begins to twist into the secondary structure known as a(n) alpha helix.
Learn more about the Amino acids here: https://brainly.com/question/2526971
#SPJ4
As a reaction proceeds toward equilibrium from reactants to products (i.e., from left to right as written), the value of Q is
As a reaction proceeds toward equilibrium from reactants to products, the value of Q is Increasing
Equilibrium can exist in chemical processes (the products and reactants are produced at the same rate). In a reversible chemical reaction, chemical equilibrium is the state in which there is no net change in the quantity of reactants or products. When a chemical reaction is reversible, the products react with the original reactants as soon as they are created.
There is no net change in the quantity of the chemicals involved when the two opposing reactions are in equilibrium because they are occurring at identical rates, or velocities. At this point, the reaction may be deemed to be finished, meaning that the maximum amount of reactants to products has been converted under the given reaction conditions.
To learn more about Equilibrium please visit -
https://brainly.com/question/2009610
#SPJ4
a major textile dye manufacutrer developed a new yellow dye. the dye has a percent composition of 75.95%C, 17.72%n and 6.33%H by mass with a molar mass of about 240g/mol. determine the molecular formula of the dye
The molecular formula of dye:
A major textile dye manufacturer developed a new yellow dye with a molecular formula [tex]C_{15}N_{3}H_{15}[/tex].
Given:
Percentage composition:
C = 75.95%
N = 17.72%
H = 6.33%
Molar mass = 240 g
To find: molecular formula of dye
Calculation:
Let's assume the mass of the compound is 100 gm.
So, Mass of C = 75.95 gm
Mass of N = 17.72 gm
Mass of H = 6.33 gm
The number of moles = given mass/mass
Therefore, the number of moles of C = 75.95/12 = 6.33
The number of moles of N = 17.72/14 = 1.27
Number of moles of H =6.33/1 = 6.33
Simplest ratio:
C = 6.33/1.27 = 4.98 =5
N = 1.27/1.27 = 1
H = 6.33/1.27 = 4.98 =5
Therefore, the empirical formula is [tex]C_{5}NH_{5}[/tex]
The mass of empirical formula = 12 x 5 + 14 + 1 x 5 = 79 gm
Number of moles= molar mass/ empirical formula
n = 240/79 = 3.04 =3
Therefore, molecular formula = empirical formula x n
Hence, molecular formula = [tex]C_{15}N_{3}H_{15}[/tex]
Learn more about molecular formulas here,
https://brainly.com/question/24083714
#SPJ4
Elements on the periodic table are arranged in order by their
Answer:
in order of increasing atomic number, or the number of protons in an atom's nucleus, which generally coincides with increasing atomic mass
livesciencecom
Nylon, a polyamide, is produced from hexanediamine and a substance, x. This substance, x, is most probably:____.
a. an amine.
b. a carboxylic acid.
c. a nitrile.
d. an alcohol.
Nylon, a polyamide, is produced from hexanedi-amine and a substance, x. This substance, x, is most probably a carboxylic acid.
A polymer containing repeating units connected by amide bonds being called a polyamide. Both naturally occurring and synthetic polyamides are found. Proteins found in materials like wool and silk were examples of naturally produced polyamides.
The term "nylon" refers to a family of polymeric materials made up of polyamides. Nylon would be a silk-like thermoplastic that may be formed into threads, films, or other shapes. It is often manufactured from petroleum.
Therefore, Nylon, a polyamide, is produced from hexanedi-amine and a substance, x. This substance, x, is most probably a carboxylic acid.
To know more about polyamide
https://brainly.com/question/10266375
#SPJ4
A sample of hydrogen gas collected at a pressure of 0.923 atm and a
temperature of 17.0 °C is found to occupy a volume of 29.6 liters. How many
moles of H₂ gas are in the sample?
mol
Answer:
1.15 moles H₂
Explanation:
To find the moles of H₂ gas, you need to use the Ideal Gas Law equation. The equation looks like this:
PV = nRT
In this equation,
-----> P = pressure (atm)
-----> V = volume (L)
-----> n = moles
-----> R = Ideal Gas Constant (0.08206 L*atm/mol*K)
-----> T = temperature (K)
Before you can plug the given values into the equation and simplify, you need to convert Celsius to Kelvin.
P = 0.923 atm R = 0.08206 L*atm/mol*K
V = 29.6 L T = 17.0 °C + 273.15 = 290.15 K
n = ? moles
PV = nRT
(0.923 atm)(29.6 L) = n(0.08206 L*atm/mol*K)(290.15 K)
27.3208 = n(23.809709)
1.15 = n
What kind of defect or dislocation does a carbon in a ti metal lattice represent?
electrical conductivity is the kind of defect or dislocation a carbon in a ti metal lattice represents.
The electrical conductivity of a metal is the result of the movement of charged particles. Atoms of metal elements are electrons in the outer shell of the atom and are characterized by the presence of valence electrons that can move freely around
Staircase dislocations and Lomer-Cottrell dislocations are examples of fixed dislocations. The two main types of movable dislocations are blade dislocations and spiral dislocations. The blade dislocations can be visualized as being caused by the termination of the atomic plane at the center of the crystal.
Learn more about electrical conductivity here:https://brainly.com/question/18384031
#SPJ4
In an ionic lattice:
A. atoms are packed together in a regular cubic arrangement
B. atoms are bonded with 2 single bonds and one double bond.
C. atoms are structured in a vast network of atoms.
D. atoms are bonded to four others in a tetrahedral shape.
In an ionic lattice, atoms are packed together in a regular cubic arrangement; option A.
What is an ionic compound?
An ionic compound is a compound which is composed of oppositely-charged ions which are held together by strong electrostatic forces of attraction.
The properties of ionic compound include:
They occur in regular crystal latticesThey have high melting and boiling pointsThey are electrolytes.Ionic lattices have regular structural patterns consisting of atoms arranged in a regular repeating pattern, usually a cube. There are several cubic structures in ionic lattices.
In conclusion, ionic lattices are regular repeating arrangement of atoms. Ionic lattices are usually arranged in the form of cubic crystal.
Learn more about ionic lattice at: https://brainly.com/question/25682087
#SPJ1
is generally regarded as one of the most accomplished and influential
scientists in history.
answer - Albert Einstein
explanation -
Albert Einstein is arguably the most influential scientist of the 20th century. His … general theory of relativity changed our understanding of space and time, becoming one of the two pillars of modern physics – the other being quantum mechanics.
Explain why the production of a gas in this experiment is or is not different from the formation of water vapor in the heating curve experiment.
The production of a gas is different because unlike the heating curve, there was no heat applied to this experiment, and the experiment was a chemical reaction.
What is a Heating curve?This shows the relationship between the temperature of the heating system and the air temperature in the outer environment.
The chemical reaction emitted heat as against the other which involved heat application which is why water formation in this curve was different.
Read more about Heating curve here https://brainly.com/question/14094062
#SPJ1
Engine cooling fluid is a. distilled water. b. tap water from a faucet. c. a mixture of alcohol and water. d. a mixture of antifreeze and water.
Engine cooling fluid is a mixture of antifreeze and water.
Hence option (d) is correct.
A liquid mixture of water and antifreeze called engine coolant is kept in your car's radiator.
Any compound that lowers water's freezing point is considered antifreeze and protects a system against the negative effects of ice formation.
Radiators are protected from deterioration by antifreezes, which are frequently added to water in car cooling systems.
It keeps your engine from freezing in extremely cold weather or overheating in hot weather, both of which can cause serious problems for an engine.
Although it's standard practice to combine water and antifreeze 50/50 in a car's cooling system, this guideline is not inflexible.
Mixtures can be changed to either raise the boiling point or lower the freezing point limit due to the wide range of weather conditions that cars can operate in.
Hence, Engine cooling fluid is a mixture of antifreeze and water.
Learn more about engine coolant here https://brainly.com/question/20263230
#SPJ1
The solubility of lead(II) chloride is 0.45 g/100 mL of solution. What is the Ksp of PbCl2?a. 8.5 ? 10^-6b. 4.2 ? 10^-6c. 1.7 ? 10^-5d. 4.9 ? 10^-2e. < 1.0 ? 10^-6
The solubility of lead(II) chloride is 0.45 g/100 mL of solution. The value of [tex]K_{sp}[/tex] of [tex]PbCl_{2}[/tex] is 1.7×[tex]10^{-5}[/tex] .
So, option C is correct one.
Calculation,
Number of moles of [tex]PbCl_{2}[/tex] = mass/molar mass = 0.45/278.1 = 1.618×[tex]10^{-3}[/tex] moles
Concentration of [tex]Pb^{+2}[/tex] and [tex]Cl^{-}[/tex] ion
Molarity of [tex]Pb^{+2}[/tex] = Number of moles of solute /volume in lit
Molarity of [tex]Pb^{+2}[/tex] = 1.618×[tex]10^{-3}[/tex] moles /0.1 lit = 0.0162 M
[tex]PbCl_{2}[/tex] → [tex]Pb^{+2}[/tex] + 2[tex]Cl^{-}[/tex]
For certain amount of [tex]Pb^{+2}[/tex] , twice this amount of [tex]Cl^{-}[/tex] ion formed.
The concentration of [tex]Cl^{-}[/tex] ion formed = 2× 0.0162 M = 0.0324 M
Now,
The solubility of lead(II) chloride of solution = 0.45 g/100 mL
[tex]K_{sp}[/tex] of [tex]PbCl_{2}[/tex] = [ [tex]Pb^{+2}[/tex] ][tex][Cl^{-}]^{2}[/tex] = 0.0162 ×[tex][0.0324 ]^{2}[/tex] = 1.7×[tex]10^{-5}[/tex] .
learn about Molarity
https://brainly.com/question/8732513
#SPJ4