Planets that are made mostly of gas are known as gas giants. The four outer planets in our solar system, Jupiter, Saturn, Uranus, and Neptune, are all gas giants.
What are planets?These planets are made primarily of hydrogen and helium, with trace amounts of other elements. Planets that are made mostly of gas are known as gas giants. The four outer planets in our solar system, Jupiter, Saturn, Uranus, and Neptune, are all gas giants.
Gas giants are thought to have formed farther away from the Sun than the terrestrial planets (like Earth), where temperatures were low enough for hydrogen and helium to condense into solid ice. In these colder regions, there was a lot more gas and dust available to form planets, which led to the formation of gas giants.
As gas giants formed, their large masses and strong gravitational forces allowed them to capture even more gas and dust from the surrounding space, which contributed to their growth. The extreme pressures and temperatures in the cores of these planets also cause the hydrogen to undergo a phase transition, turning into metallic hydrogen that behaves like a liquid and contributes to the planet's magnetic field.
It's worth noting that gas giants are not entirely made of gas - they also have solid cores, although the exact size and composition of these cores is not well understood. Some gas giants may also have liquid layers between the gas and the core and may have complex weather patterns on their surfaces due to the interactions of different layers of gas moving at different speeds.
To know more about planets follow
https://brainly.com/question/503999
#SPJ1
what is the reading w2 of the scale when the ball is held in this submerged position? assume that none of the water that spills over stays on the scale.
The reading W2 of the scale when the ball is held in this submerged position is 1.00 N.
As the ball is held up mainly by the rod, the fluid pressure on the bottom of the cylinder is entirely the same as before.
The scale doesn't "know" the ball is there ever.
That's why it still reads 1 N.
Thus, the reading is 1 N
The extra force that is exerted by the ball on the water is equal to the force that the water exerts on the ball, i.e., the weight of the displaced water.
Therefore, the reading does not change.
To learn more about the force,
brainly.com/question/25573309
#SPJ4
Which choice names two ways nonmetallic minerals can be used?A)industrial processes and gemsB)conductors and for industrial purposesC)wiring and gems
The choice names two ways nonmetallic minerals can be used industrial processes and gems
option A
Non-metallic minerals can be utilized as jewels and in industrial operations. Some non-metallic minerals are highly valuable, well-cut, and fetch a premium on the market. Ruby and tourmaline are two examples. Most non-metallic minerals are employed as raw materials in industrial processes. Due to their weak conductivity, these materials cannot be utilized as ones. Because they lack metallic links inside their lattices, they cannot be utilized for wiring.
Since they are of excellent gem grade, they are best employed in industrial operations and for items of value. Numerous industrial uses exist for calcium carbonate in its different forms. In addition to being utilized as a construction material, limestone also serves as a flux in metallurgy and is used to produce calcium cyanamide and lime.
To know more about nonmetallic minerals on
https://brainly.com/question/19976113
#SPJ4
What are the 5 stages of the allegory of the cave?
The five stages of the allegory of the cave are: (1) the prisoners' initial state of ignorance, (2) the introduction of a new reality, (3) the prisoners' resistance to the new reality, (4) the prisoners' acceptance of the new reality, and (5) the prisoners' transformation and enlightenment.
The first stage is their initial state of ignorance. In the second stage, one of the prisoners is freed and shown the outside world. This introduces a new reality that the other prisoners are unaware of. The third stage is the prisoners' resistance to this new reality.
They refuse to believe that what they see is true. The fourth stage is their acceptance of the new reality, and the fifth stage is their transformation and enlightenment, where they understand the truth and become enlightened. The allegory represents the journey from ignorance to knowledge and the difficulties one faces in accepting and understanding new truths.
To know more about the allegory, here
brainly.com/question/30285700
#SPJ4
whats the scientific method in order
Answer:
See explanation
Explanation:
Observe, question, research, hypothesize, experiment, review hypothesis, report results.
the ability of an object to maintain its balance is known as ___________
An object's capacity to keep its balance after being shaken up is referred to as stability. An object's center of gravity plays a major role in determining how stable it is.
Why does gravity have a force?However, gravity is a force in the broadest sense since it defines the interaction that results when two masses are in close proximity to one another. The warping of spacetime and the motion of things through the stretched spacetime are the primary causes of gravitational effects. It appears as though a force was exerted towards the end, though.
What is the simple explanation of gravity?According to the theory, every particle of matter pulls toward every other particle with a force that is directly proportional to the product of their masses and inversely proportional to the square of their distance from one another.
To know more about Gravity visit:
https://brainly.com/question/29067398
#SPJ4
Some thermometers contain alcohol. Alcohol is used in thermometers because A. is soluble in waterB. is a clear gas when it evaporatesC. expands and contracts easilyD. has a high density
A rate law that is proportional to the concentration of reactants raised to a power, which corresponds to the reactant's stoichiometric coefficient, is often used to describe reactions that can occur in a single step.
What is the reaction's rate constant, 2N2O5 to 2N2O4 O2?rk = [N2O5] = 2.40 10 53.0 10 5 = 0.8 mol L 1. Calculate the concentration of N2O5 using the reaction's rate and rate constant, which are 2.40 mol L-1 second-1 and 3 mol L-5 second-1, respectively.
What happens when 2O3 and 3O2 react in what order?The following is how the chemical reaction 2O3 3O2 develops. The appropriate expression for the rate law is O3 O2 +O (FAST) O+O32O2 (SLOW).
To know more about reactions visit:-
https://brainly.com/question/13316655
#SPJ4
What is the magnitude of the magnetic field?
The strength or intensity of the magnetic field at a given place in space is referred to as its magnitude.
It is measured in teslas (T) or gauss (G) units, depending on the measuring technique employed. Because the magnetic field is a vector quantity, it possesses both magnitude and direction.
The size of the magnetic field is governed by several parameters, including the current or magnetic charge that generates the field, the distance from the source of the field, and the field's direction with regard to the measuring device.
Magnetic field magnitude can be determined using mathematical methods that account for these parameters, such as the Biot-Savart law or Ampere's law.
Learn more about the magnitude and magnetic field at
https://brainly.com/question/29217777
#SPJ4
is water wet? or does it make things wet?
Water is not wet itself or it does not make things wet. The water makes bond with the other materials through adhesive forces.
What is Wetness?Wetness is a description of the experience of water, it is a quality of the liquid water. Liquid water is not itself wet, however it cannot even make things actually wet. Wetness is the ability of a liquid to adhere to the surface of a solid material, so when we say that something is wet, we mean that the liquid material is sticking to the surface of a material.
An adhesion is present between two things and something that the water molecules cannot do to itself. Water has to be wetted by something else or it makes no sense at all. Water can be wetted easily by oil or another foreign liquid, however it cannot wet itself.
Learn more about Wetness here:
https://brainly.com/question/8690223
#SPJ9
which of these illustrates potential energy due to gravity being converted into kinetic energy?a.a hammer dropped off a roof accelerates as it fallsb.a burning log heats a container of waterc.a rubber band becomes harder to pull as it is stretched fartherd.cell in the body convert food molecules.
The following illustrates potential energy due to gravity being converted into kinetic energy : a. hammer dropped off a roof accelerates as it falls.
What illustrates potential energy due to gravity being converted into kinetic energy?Hammer dropped off a roof accelerates as it falls illustrates potential energy due to gravity being converted into kinetic energy. When the hammer is dropped, potential energy due to its position above the ground is converted into kinetic energy, which is the energy of motion, as it falls and accelerates towards ground.
If the rock falls from the cliff, the potential energy will be converted to kinetic energy, as the rock will be moving. When the elastic string in a longbow is released, it will cause the arrow to shoot forward.
To know more about potential energy, refer
https://brainly.com/question/21175118
#SPJ4
a car accelerate from rest to a speed of 3600m/s in 20 second what is the acceleration of the car?
Formula and solution pls
Answer:
Explanation:
The formula for acceleration is:
a = (v_f - v_i) / t
Where:
a = acceleration
v_f = final velocity
v_i = initial velocity (in this case, 0 m/s since the car started from rest)
t = time
Plugging in the given values, we get:
a = (3600 m/s - 0 m/s) / 20 s
a = 180 m/s^2
Therefore, the acceleration of the car is 180 m/s^2.
what is the angular displacement formula?
Angular displacement is defined as “the angle in radians (degrees, revolutions) through which a point or line has been rotated in a specified sense about a specified axis”.
Formula:
S = rθ
∴ S = arc length
r = distance
θ = angular displacement
Throughout the letter, king juxtaposes opposites to highlight tension between what is and what should be. Focusing on two examples, what points does he raise?.
The storyteller's discourse on Ignatius' appearance contrasts with his record of inward contemplations, highlighting the irregularity between his judgmental demeanor, sketchy garments, and prepping.
What is Ignatius?Except for what can be deduced internally from Ignatius' letters, nothing is known about his life outside of later (and occasionally false) traditions.Ignatius allegedly became a Christian at a young age. Ignatius and his associate Polycarp are recognised by tradition as being followers of John the Apostle.Ignatius was appointed Bishop of Antioch later in his life; according to the fourth-century Church historian Eusebius, Ignatius replaced Evodius.To know more about Ignatius, click the link given below:
brainly.com/question/18039370
#SPJ4
The complete question is: What points does King raise by juxtaposing opposites to highlight tension between what is and what should be?
Applying the process of scientific inquiry to find answers for yourself is called scientific _________.
Applying the process of scientific inquiry to find answers for yourself is called scientific investigation.
What is the process of Scientific investigation?
This process typically involves the following steps:
Formulating a question or problem to be investigatedConducting background research to gather information and understand the current state of knowledgeDeveloping a hypothesis to make predictions about the outcome of the investigationDesigning and conducting experiments to test the hypothesisAnalyzing the data and forming conclusions based on the evidenceCommunicating the results to others through publications or presentationsScientific investigation is the process of using systematic and systematic methods to gather evidence, test hypotheses, and form conclusions about natural phenomena. It is a self-directed process where a scientist sets out to answer questions, solve problems, or test theories. By using the scientific method, scientists can ensure that their investigation is systematic, controlled, and reliable, and that their conclusions are based on evidence and data.
Therefore, scientific investigation is the correct answer.
To learn more about scientific investigation from the link
https://brainly.com/question/8386821
#SPJ4
if the electric flux through a closed surface is zero, the electric field at points on that surface must be zero.
True, if the electric flux through a closed surface is zero, the electric field at points on that surface must be zero.
What does a closed surface's electric flux look like?
The charge encapsulated divided by the permittivity is equal to the total electric flux out of a closed surface. The electric field is multiplied by the surface area projected in a plane perpendicular to the field to get the electric flux across a region.
If there is a net outward flow, the electric flux through a closed surface is positive; if there is a net inward flow, it is negative. If there is a source inside the closed surface, we have a net outward flux, and if there is a sink inside the closed surface, we have a net inward flux. Zero field implies zero flux, but zero flux does not imply zero field.
To learn more about electric flux use link below:
https://brainly.com/question/26289097
#SPJ4
HELPPPPPPP
8. Explain the process of making ice cream in terms of heat energy transfer. Be sure to explain why the liquid milk
mixture changed into solid form AND why the ice in the bag started changing to a liquid. (Where was the heat originally
and where did it go? How do you know-what data do you have that proves the thermal energy was transferred?)
Making ice cream is a great way to explore thermal energy transfer. The liquid milk mixture changed to a solid during
the process because thermal energy transferred from the liquid milk to
The ice changed to a
liquid during the process because thermal energy transferred from the
to the ice. Thermal energy
transfer is confirmed by the states of matter changes of the milk mixture and the ice. It is also confirmed by the change
in temperature of the items. The milk mixture had a
in temperature, which confirms thermal
in temperature, which confirms thermal energy being
energy loss. The ice had a(n).
gained.
Heat is transferred from the cream solution to the ice leading to the ice melting and colder.
What happens to heat energy when making ice cream?Heat energy goes from the regions with more heat energy to other regions with less heat energy. The milk mixture has more heat energy as compared to the salt and ice. Heat energy goes from the milk mixture to the ice and salt. The milk mixture releases heat energy, which resulted in cooling and freezing which eventually becomes the ice cream solid.
Ice absorbs energy to melt. Heat is transferred from the cream solution to the ice, making the ice melt and the cream colder. Eventually, as the ice absorbs more energy from the cream mixture it will start freezing.
So we can conclude that Heat is transferred from the cream solution to the ice making the ice melt and cold the cream.
Learn more about the heat here: https://brainly.com/question/934320
#SPJ1
(4\%) Problem 3: A uniform electric field of magnitude 42 N/C is parallel to the x axis. A circular loop of radius 24 cm is centered at the origin with the normal to the loop pointing 55 ∘ above the x axis. - $50% Part (a) Calculate the electric flux in, newton squared meters per coulomb, through the loo Φ= N⋅m 2 /C Hints: deduction per hint. Hints remaining: 2 Feedback: deduction per feedback.
The electric flux through the loop is approximately 3.42 newton squared meters per coulomb (N·m^2/C).
The electric flux through a surface is given by the product of the electric field passing through the surface and the area of the surface,
Φ = EAcos(θ)
where Φ is the electric flux, E is the electric field, A is the area of the surface, and θ is the angle between the electric field and the normal to the surface.
In this problem, the electric field is parallel to the x-axis, so its angle with the normal to the circular loop is θ = 55°.
The area of the circular loop is A = πr^2, where r is the radius of the loop. Thus, the electric flux through the loop is:
Φ = EAcos(θ)
= (42 N/C)(π(0.24 m)^2)*cos(55°)
≈ 3.42 N·m^2/C
To know more about the electric flux, here
brainly.com/question/14544020
#SPJ4
--The complete question is, A uniform electric field of magnitude 42 N/C is parallel to the x axis. A circular loop of radius 24 cm is centered at the origin with the normal to the loop pointing 55 ∘ above the x axis.
(a) Calculate the electric flux in, newton squared meters per coulomb, through the loop.--
The lowest note on a grand piano has a frequency of 27.5 Hz. The entire string is 2.00 m long and has a mass of 440g . The vibrating section of the string is 1.90m long.What tension is needed to tune this string properly?
The tension needed to tune a grand piano string with a frequency of 27.5 Hz and a length of 1.90 m is 5,129 N.
The tension required to tune the string can be calculated using the following formula:
T = (mu * v^2) / L
Where T is the tension, mu is the string's linear mass density (mass per unit length), v is the wave's speed on the string, and L is the span of the string's vibrating portion.
To begin with, we must figure out the string's linear mass density:
mu = m/L = 0.440 kg/1.8 m = 0.2316 kg/m
The speed of the wave on the string needs to be calculated next. The equation: gives the speed of a wave on a string.
sqrt(T/u),
T represents tension, and u represents linear mass density. This equation can be changed to:
T = u
The tension required to tune the string can be calculated using the following formula:
T = (mu * v^2) / L
Where T is the tension, mu is the linear mass density of the string (mass per unit length), v is the speed of the wave on the string, and L is the length of the vibrating section of the string.
First, we need to calculate the linear mass density of the string:
mu = m / L = 0.440 kg / 1.90 m = 0.2316 kg/m
Next, we need to calculate the speed of the wave on the string. The speed of a wave on a string is given by the formula:
v = sqrt(T/u)
where T is the tension and u is the linear mass density. Rearranging this equation gives:
T = u * v^2
Substituting in the values we have:
v = f * lambda
where f is the frequency and lambda is the wavelength of the wave. The wavelength can be calculated from the length of the vibrating section of the string:
lambda = 2 * L = 3.80 m
Substituting in the values we have:
v = f * lambda = 27.5 Hz * 3.80 m = 104.5 m/s
Now we can calculate the tension:
T = u * v^2 / L = 0.2316 kg/m * (104.5 m/s)^2 / 1.90 m = 5,129 N
Therefore, the tension needed to tune this string properly is 5,129 N.
Learn more about frequency here:
https://brainly.com/question/5102661
#SPJ4
Prescription glasses do not provide adequate eye protection because they:
Select one:
A. do not have shatterproof lenses.
B. have large rounded lenses.
C. offer little or no side protection.
D. are not secured with a strap.
Answer:
They do not have shatterproof lenses. Safety glasses are required to protect the eye from weather such as sandstorms and blizzards, or from hazards like sparks, and from impact especially, which is why the shatterproof lenses are needed. Prescription glasses, on the other...eye? Are made to mitigate or correct vision deformities such as near-sightedness or blurriness. These lenses are not made, nor required, to physically protect your eyes, but instead provide clarity of vision.
Prescription glasses do not provide adequate eye protection because they do not have shatterproof lenses. So, option A.
Safety glasses provide a different function than the prescription glasses.
Safety glasses must adhere to greater standards than conventional prescription eyeglasses in terms of impact resistance in order to be considered. The vast majority of prescription eyeglasses won't match up to this requirement.
Correcting eyesight is the main function of prescription glasses. Although they don't correct eyesight, safety glasses protect the eyes.
Regular prescription glasses cannot be used as eye protection in laboratories since they do not offer sufficient protection against potential dangers.
To learn more about prescription glasses, click:
https://brainly.com/question/28188496
#SPJ6
what is physics-based data analysis models for large datasets ?
Physics-based data analysis models for large datasets are mathematical and computational methods used to analyze and interpret data from large and complex systems. These models are used to understand the underlying physics of the system and to make predictions about its behavior.
There are several different types of physics-based data analysis models for large datasets, including statistical models, machine learning models, and computational fluid dynamics models. Each of these models uses different techniques and algorithms to analyze and interpret the data.
Statistical models use statistical methods to analyze the data and make predictions about the system. These models are often used to understand the relationship between different variables in the system and to make predictions about future behavior.
Machine learning models use algorithms to learn from the data and make predictions about the system. These models are often used to classify data into different categories and to make predictions about future behavior.
Computational fluid dynamics models use numerical methods to simulate the behavior of fluids and gases in the system. These models are often used to understand the flow of fluids and gases in the system and to make predictions about future behavior.
Overall, physics-based data analysis models for large datasets are important tools for understanding and predicting the behavior of complex systems.
To know more about data analysis here:
https://brainly.com/question/30094947#
#SPJ11
a block of wood is floating with one half of its volume out of the water. then it is pushed down so that it is completely underneath the water. use your understanding of buoyant force and archimedes’ principle to determine what happens to the forces on the block of wood.A. The buoyant force on the block is the same in the two cases because the weight per unit volume of the wood has not changed.
B. The buoyant force on the block is the same in the two cases because the weight per unit volume of the water is the same in each case.
C. The buoyant force on the block is greater when the block is completely submerged than it is when the block is floating.
D. The buoyant force on the block is greater when it is floating than when it is totally submerged.
E. The buoyant force on the block is the same in the two cases because the block loses weight as it is submerged.
The force that occurs in a wooden block is the buoyant force on the block is greater when the block is completely submerged than it is when the block is floating.
So Archimedes' Law explains that there is a relationship between weight and upward force on a force if it is put in water. As a result of the upward lift (buoyancy), of course, objects that are in the liquid will experience a weight reduction. As a result, objects lifted in water will feel lighter than when lifted on land.
When submerged, the weight of the object in the liquid is greater than the upward force exerted by the liquid.
So, the compressive force of water < the weight of the object, and the correct answer is C.
Learn more about buoyancy at https://brainly.com/question/28464280
#SPJ4
If an atom has an atomic number of 87 and a mass number of 223, how much is the number of neutrons?.
The atomic number of francium is 87. This indicates that each francium atom has 87 protons and the equal amount of electrons in its nucleus. Francium has an atomic mass of 223 and 136 neutrons.
Mass is what?In physics, mass is a quantitative expression of inertia, a basic characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the applying of a force.
How is mass determined?A balance is the instrument you'd use to calculate mass. A triple beam balanced or a measuring cylinder may be used in the lab to measure mass, but the traditional balance shown below could help you understand what mass is.
To know more about Mass visit:
https://brainly.com/question/17067547
#SPJ4
A student completes a PET experiment using chloroplasts from leaves lacking pigments that absorb in the 550 nm to 600 nm wavelength range. Which color of light should they avoid in their experiment if they want to measure activity at different wavelengths? Absorbance 360 760 460560660 Wavelength (nm) O Blue O Orange O Yellow O Red O Violet Light Absorption Spectrum of Spinach Extract
The student should avoid using yellow light if they want to measure activity at different wavelengths.
Yellow light should not be used since it lacks the pigment necessary to absorb wavelengths between 550 and 580 that will cause it to be completely ineffective.
Color Wavelength (nm)
Red 650 - 800
Orange 590 - 640
Yellow 550 - 580
Blue 460 - 480
Indigo 440 - 450
Violet 390 - 430
In physics, a periodic wave's wavelength is the length over which its form repeats. It is a characteristic of other spatial wave patterns as well as traveling and standing waves.
It is the separation between two consecutive positions on a wave that correspond to the same phase, such as two close-by crests, troughs, or zero crossings. The reciprocal of wavelength is the spatial frequency. Wavelength is usually denoted by the Greek letter lambda ().
learn more about wavelengths
brainly.com/question/19448078
#SPJ4
Fill in the blank: Scientists worried that cloned animals would age rapidly because their cells contain ________ as old as the individual they were cloned from.
Scientists worried that cloned animals would age rapidly because their cells contain Clones as old as the individual they were cloned from.
What are Clones?Cloning is a method that scientists employ to make genetically identical copies of genes, cells, or even whole animals.
There are already some clones in nature. When single-celled organisms like bacteria reproduce, they create identical copies of themselves every time. Identical twins in humans are comparable to clones. They have nearly identical genes.
In the lab, scientists also create clones. Genes are frequently cloned for study and improved comprehension. Researchers take DNA from a living thing and place it into a carrier like bacteria or yeast to clone a gene.
Therefore, Scientists worried that cloned animals would age rapidly because their cells contain Clones as old as the individual they were cloned from.
To learn more about Clones, refer to the link:
https://brainly.com/question/12483409
#SPJ9
To answer this question, access the interactive simulation "Planetary Orbits Simulator".
Click the "reset" button near the top of the control panel, set parameters for Mercury, and then click on the "Kepler's 3rd Law" tab at the bottom of the control panel. Select "show solar system orbits" in the Visualization Options panel. Study the graph in the Kepler's 3rd Law tab. Use the eccentricity slider to change the eccentricity of the simulated planet. First, make the eccentricity smaller and then larger.
What does the change in the period with respect to the eccentricity tell you about the dependence on the period on the eccentricity?
A. The period depends inversely on the eccentricity.
B. The period depends directly on the eccentricity.
C. The period does not depend on the eccentricity.
D. The graph does not indicate anything about the dependence.
The eccentricity tell you about the dependence on the period on the eccentricity ; The period depends directly on the eccentricity.
What is the eccentricity ?Eccentricity is a measure of how much an ellipse deviates from a perfect circle. It is defined as the ratio of the distance between the two foci of an ellipse to the length of its major axis. The eccentricity of a circle is zero, while any other ellipse has an eccentricity greater than zero but less than one. Eccentricity is used to quantify how elongated an ellipse is, with higher eccentricity indicating a more elongated shape. Eccentricity can also be used to describe the orbits of planets and other celestial bodies, with higher eccentricity indicating a more elongated orbit.
To learn more about eccentricity
https://brainly.com/question/29484069
#SPJ4
The fastest pitched baseball was clocked at 47 m/s. Model the throw as being caused by a constant, horizontal force over a distance of 1. 0 m. A baseball has a mass of 150 g.
The force the pitcher exerts on the ball during this record-setting pitch is 160.15 N. The force exerted on the baseball as a fraction of the pitcher's weight is 0.195.
What is a force?Concepts related to force include thrust, which increases the velocity of an object; drag, which decreases the velocity of an object; and torque, which produces changes in the rotational speed of an object. In an extended body, each part usually applies forces on the adjacent parts; the distribution of such forces through the body is internal mechanical stress.
The given parameters;
the initial velocity of the baseball, u = 47 m/s
distance traveled by the ball, d = 1 m
mass of the baseball, m = 145 g = 0.145 kg
The free-body diagram of the ball during the pitch is in the image added.
The acceleration of the baseball over the given distance is calculated as;
v² = u² - 2as
when the ball stops, the final velocity, v = 0
0 = u² - 2as
2as = u²
a= u²/2s
a = 1140.5 m/s²
The force the pitcher exerts on the ball during this record-setting pitch is calculated as;
F = ma
F = 0.145 x 1,104.5
F = 160.15 N.
The weight of the pitcher is calculated as;
W = mg
W = 84 x 9.8
W = 823.2 N
The force exerted on the baseball as a fraction of the pitcher's weight is calculated as follows;
n = 160.15/823.2 = 0.195
To know more about force, click the link given below:
brainly.com/question/13191643
#SPJ4
Helpppppppppppppppppp
Answer:
2,3,4,6
Explanation:
How many watts of power does Jim's car use if it does 1675 joules of work in carrying a boat for 8.9 seconds?
Answer:
8.6
Explanation:
A 6 kg bowling ball is rolling with a velocity of 3 m/s. What is the kinetic energy of the bowling ball?.
27J is the kinetic energy of the bowling ball
Describe kinetic energy.
The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
Kinetic energy, which may be seen in the movement of an item or subatomic particle, is the energy of motion. Kinetic energy is present in every particle and moving object. Examples of kinetic energy in action include a person walking, a baseball soaring through the air, a piece of food falling from a table, and a charged particle in an electric field.
Kinetic energy, K.E : 1/2 mv^2
m : 6kg
v : 3m/s
K.E : 1/2 *6*3*3
K.E : 27J
To learn more about Kinetic energy use link below:
https://brainly.com/question/25959744
#SPJ4
Line a is parallel to line b. If the
measure of 27 is 114°, what is the
measure of 41?
21
34
65
114°= 78
a
b
The measure of angle 3 is given as 114 degrees
What is an angleAn angle is a geometric figure formed by two rays or lines that share a common endpoint called the vertex. The rays or lines that form the angle are referred to as the arms or sides of the angle. Angles are typically measured in degrees (°) or radians, and the measure of an angle indicates the amount of rotation between the two arms or sides, starting from one arm and rotating around the vertex to reach the other arm.
Line a and line b are parallel.
< 7 = 114°
The value of 3 measured as
= < 7
Having similar angles, = 114°
Read more on angles here:https://brainly.com/question/25716982
#SPJ1
An element crystallizes in a face-centered cubic lattice and has a density of 1. 456 g/cubic. The edge of its unit cell is 4. 52 x 10-8 cm. What is the mass of a unit cell ?.
The mass of a unit cell is 6.65 x 10⁻²³ g.
What is mass?
Mass is a measure of the amount of matter in an object. It is a scalar quantity, meaning it has only magnitude and no direction. Mass is often used interchangeably with weight, although they are different concepts. While mass is a measure of the amount of matter in an object, weight is the force exerted on an object due to gravity.
The mass of a unit cell can be calculated using the formula:
mass = density x volume
The volume of a face-centered cubic (FCC) unit cell can be calculated as follows:
volume = (edge length)^3
Substituting the given values, we get:
volume = (4.52 x 10⁻⁸ cm)³ = (4.52 x 10⁻⁸)³ cm³ = (4.52 x 10⁻²⁴) cm³
And the mass of a unit cell is:
mass = density x volume = 1.456 g/cm³ x 4.52 x 10⁻²⁴ cm³ = 6.65 x 10⁻²³g
So the mass of a unit cell is 6.65 x 10⁻²³ g.
To learn more about mass:
https://brainly.com/question/1838164
#SPJ4