why can you consider the stoichiometric relationship between h2 and br2 when trying to calculate h2 and br2 in a quantity of hbr

From highest to lowest atomic radius:

Potassium > Lithium > Carbon > Boron > Fluorine.

Atomic number is the number of protons found in the nucleus of an atom, which determines the element and its unique properties. It is denoted by the symbol "Z" and is listed in the periodic table of elements along with the element's symbol, name, and atomic mass.

The nucleus is the central core of an atom, composed of protons and neutrons, which are collectively known as nucleons. It is located at the center of the atom and contains almost all of its mass. The number of protons in the nucleus determines the identity of the atom and is referred to as the atomic number. The nucleus is held together by the strong nuclear force, which is one of the four fundamental forces of nature.

To know more about  atomic number visit :

https://brainly.com/question/8834373

#SPJ1

The correct answer for Acid dissociation constant of alloxanic acid is 1.09 × 10⁻.

The formula for alloxanic acid is HC4H3N2O5. Its pH, when it is in a 0.74 M solution, is 3.39.

We need to determine the acid dissociation constant of alloxanic acid. We can use the following formula for this purpose:

Ka = [H+][A-] / [HA]   Where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.

We need to find out the concentration of hydrogen ions and the concentration of the acid. The pH of a solution is equal to the negative log of the hydrogen ion concentration.

We can use this formula to determine the concentration of hydrogen ions: pH = -log[H+] We can rearrange this equation to get [H+]: [H+] = 10-pH.

The concentration of hydrogen ions is: [H+] = 10-3.39 = 4.45 × 10⁻⁴M The concentration of the acid is 0.74 M. The concentration of the conjugate base can be determined by the following formula: [A-] = [H+] × (Ka / [HA]).

We can rearrange this equation to get Ka: Ka = ([H+] × [HA]) / [A-]

Substituting the values, we get: [A-] = [H+] × (Ka / [HA]) [A-] = (4.45 × 10-4) × (Ka / 0.74) [A-] = 3.01 × 10⁻⁶Ka

We can substitute this value of [A-] in the above formula for Ka:Ka = ([H+] × [HA]) / [A-]Ka = (4.45 × 10⁻⁴) × 0.74 / 3.01 × 10⁻⁶Ka = 1.09 × 10⁻⁵.

For more information about acid dissociation constant refer here

https://brainly.com/question/15012972?

#SPJ11

The pOH of an aqueous solution at 25. 0 °C in which [OH-] is 0. 0030 M is pOH = 2.52.

The hydroxide ion (OH-) concentration of a solution is quantified by pOH. As a result, it may sometimes be used to determine a substance's alkalinity or even electrical conductivity. More exactly, pOH is the negative logarithm of the equation for the hydroxide ion content:

pOH = 14 - pH

pOH can be used as a corrosion indicator for the conductivity of an electrolyte in a galvanic cell. The quantity of ions that serve as charge carriers affects a solution's conductivity. Consequently, the more OH- ions there are, the more alkaline the solution is, the more conductivity the electrolyte has, and the more galvanic corrosion occurs.

We have,

[OH-] as 0.0030 M

pOH = -log₁₀[OH⁻]

= - log₁₀ [0.003]

= -(-2.52)

pOH = 2.52

Therefore, the value of pOH =2.52

Learn more about pOH value:

https://brainly.com/question/26936571

#SPJ4

The change in energy when 10.0 g of H₂ gas completely reacts with excess oxygen to form water is -285.8 kJ.

This can be determined by analyzing the thermochemical equation provided. This equation states that when 10.0 g of H₂ gas reacts with excess oxygen, it will produce 18.0 g of water and -285.8 kJ of energy.

The equation also reveals that the reaction is exothermic, meaning that energy is released during the reaction. The quantity of energy released is -285.8 kJ.

This means that when 10.0 g of H₂ gas reacts with excess oxygen to form water, there is a decrease in energy of -285.8 kJ.

To know more about thermochemical equation click on below link:

https://brainly.com/question/2874342#

#SPJ11

a) The energy absorption associated with bands in an infrared spectrum is of lower energy than the lines appearing in a visible line spectrum because infrared light has a longer wavelength than visible light, meaning that the energy required for the absorption is lower. b) The type of energy transition occurring in a molecule that causes a band to appear in an infrared spectrum is a transition from one vibrational state to another. c) The type of energy transition occurring in an atom that causes a line to appear in a visible line spectrum is an electronic transition.

a) The energy absorption related to bands in an infrared spectrum is lower in energy than the lines appearing in a visible line spectrum. The energy absorption in infrared spectrum ranges from [tex]4000 cm^{-1} to 400 cm^{-1}[/tex] . The visible spectrum of lines comes from the emission spectra of atoms, and each line corresponds to a particular energy level transition in an atom. The energy absorption related to bands in an infrared spectrum is lower in energy than the lines appearing in a visible line spectrum. The frequency of energy is higher when electromagnetic radiation has a shorter wavelength (or greater frequency). Electromagnetic radiation is characterized by frequency and wavelength, which are inversely proportional. Thus, radiation with a greater frequency has a shorter wavelength, whereas radiation with a lower frequency has a longer wavelength.

b) When a molecule absorbs energy, it undergoes an energy transition from one energy level to another. Infrared absorption spectroscopy measures the vibrations of molecular bonds, which correspond to the transitions between the vibrational energy levels of a molecule. Molecular vibrational energy is absorbed when infrared radiation is absorbed. When the energy absorbed is equal to the difference between the vibrational energy states of the molecule, an infrared band is observed.

c) Visible line spectra are produced when electrons transition from a higher energy level to a lower one, causing a photon of light to be emitted. When an atom absorbs energy, such as from a flame, a plasma arc, or an electrical discharge, its electrons can be promoted to higher energy levels. When the electrons relax back to the ground state, they emit energy in the form of electromagnetic radiation. The emitted light occurs in different regions of the visible spectrum, with each color corresponding to a specific energy level transition of the atom.

To know more about the infrared spectrum, click on the below link:

https://brainly.com/question/29796312

#SPJ11

The reaction is given by:C2H6(g) + 3O2(g) → 2CO2(g) + 3H2O(g), o) From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas.  3.92 moles of oxygen gas will react with (1/3) × 3.92 = 1.307 moles of ethane gas. This will produce 1.307 × 2 = 2.614 moles of carbon dioxide gas. q) 6.20 moles of ethane gas will react with 6.20 × 3 = 18.60 moles of oxygen gas. This will produce 6.20 × 2 = 12.40 moles of carbon dioxide gas.r) This means that all the oxygen gas will be consumed in the reaction. Therefore, there will be no excess oxygen gas remaining after the reaction. s) 4.203 moles of ethane gas will be in excess after the reaction.

The equation is now balanced as there are equal numbers of each type of atom on both sides of the equation. 6.20 moles of ethane gas will react with 6.20 × 3 = 18.60 moles of oxygen gas. This will produce 6.20 × 2 = 12.40 moles of carbon dioxide gas. From the balanced chemical equation, we can see that 3 moles of oxygen gas react with 1 mole of ethane gas to produce 2 moles of carbon dioxide gas. Therefore From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas.

From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas. Therefore, 5.69 moles of oxygen gas will react with (1/3) × 5.69 = 1.897 moles of ethane gas. This will produce 1.897 × 2 = 3.794 moles of carbon dioxide gas. This means that 6.10 − 1.897 = 4.203 moles of ethane gas will be in excess after the reaction.

To know more about carbon dioxide gas visit:-

https://brainly.com/question/30615378

#SPJ11

The equilibrium equation for the reaction between hydrochloric acid (HCl) and calcium carbonate (CaCO3)

2HCl + CaCO3 → CaCl2 + CO2 + H2O

For more information on percentage yield kindly visit to

https://brainly.com/question/31127824

#SPJ1

The total number of valence electrons that are present in a molecule of PCl3 is 26.

PCl3 stands for Phosphorus Trichloride. The molecular structure of PCl3 is trigonal pyramidal. It has three chlorine atoms and one phosphorus atom, which are bonded by three covalent bonds.

In order to determine the total number of valence electrons in PCl3, first we have to Count the valence electrons present in each atom. Phosphorus has 5 valence electrons. Chlorine has 7 valence electrons then Add the valence electrons from each atom.

P = 5 e- (phosphorus has 5 valence electrons)

Cl = 7 e- (chlorine has 7 valence electrons)

Total valence electrons in PCl3 = 5 + 7 × 3 = 5 + 21 = 26.

Therefore, there are 26 valence electrons in a molecule of PCl3.

For more such questions on valence electrons, click on:

https://brainly.com/question/371590

#SPJ11

No, an electroscope cannot measure quantitative charges because it only indicates the presence or absence of charge.

An electroscope is a straightforward tool used to find electrical charges. Based on the idea that like charges repel one another, it causes an object, such as a leaf or a needle, to move away from another that is charged. An electroscope, however, cannot reveal the magnitude or size of the charge that is present.

A more advanced instrument, like an electrometer, which is capable of measuring small electric charges with a high degree of accuracy, would be required to measure quantitative charges. The output of detectors like Geiger counters and particle detectors, as well as static charges, are frequently measured using electrometers in scientific research and engineering applications.

Learn more about electroscope

brainly.com/question/10470196

#SPJ4

The complete question is-

Can an electroscope measure quantitative charges?

Answer: I think its 111.6

Explanation:

The term that refers to the attraction of water molecules to one another is "cohesion". The correct answer is option: b. cohesion.

Cohesion is a property of water molecules that arises from their polarity and hydrogen bonding. The oxygen atom in each water molecule is partially negative, while the hydrogen atoms are partially positive, creating a polar molecule. The polar nature of water allows the oxygen atoms in one molecule to form hydrogen bonds with the hydrogen atoms in nearby water molecules, resulting in a strong attraction between them. This cohesive property of water is responsible for many of its physical properties, such as surface tension and capillary action.  Option b is correct.

To know more about Cohesion, here

brainly.com/question/29598400

#SPJ4

Answer:

400 cm³

Explanation:

n = number of moles (mol)

c = concentration (mol/dm³)

v = volume (dm³)

Relevant formula:

n = c × v

Note: remember to convert to appropriate units

20 cm³ = 0.02 dm³

n = 2 × 0.02

n = 0.04

This means there is 0.04 moles of the solute, i.e. the substance being diluted;

Since we also know the final concentration, we can work out the volume using the same formula:

0.04 = 0.1 × v

v = 0.04/0.1

v = 0.4 dm³ = 400 cm³

We need to use the psicrometra, a branch of thermodynamics that studies the behaviour of heated air, to address this problem. We can calculate the amount of water that is eliminated each kilogramme of air.

that passes through as well as the volume of air needed to remove 20 kilogrammes of water per hour by using the air entry and exit conditions in the continuous separator.To achieve this, we will use the properties of air and the psicrometric table, which correlates the properties of warm air such as temperature, relative humidity, and specific humidity.

Water loss rate per kilogramme of air flow:

First, we must figure out the precise humidity of the entrance and exit air. The specific humidity is the amount of water in the air per kilogramme of dry air.

learn more about eliminated here:

https://brainly.com/question/29560851

#SPJ4

The least energetic spectral line in the infrared series of an atom is n = 3. The energy of the electron in the n = 3 state is -1.51 x 10⁻¹⁹ J.

The formula used to calculate wavelength of a photon is given as:

λ = c / ν

where

c = the speed of light = 2.998 × 10⁸ m/sν = the frequency of the photon

The frequency of the photon absorbed for a transition of an electron from the n = 3 state is given by:

ΔE = E_final - E_initial

where

ΔE = the energy absorbed

The energy of the electron in the n = 2 state is -3.40 x 10⁻¹⁹ J.

these values, we can calculate the energy of the absorbed photon.

ΔE = -1.51 × 10⁻¹⁹ J - (-3.40 × 10⁻¹⁹ J)ΔE = 1.89 × 10⁻¹⁹ J

The frequency of the photon is given by:

ΔE = hν

Where

ν = ΔE / hν = 1.89 × 10⁻¹⁹ J / (6.63 x 10⁻³⁴ J·s)

ν = 2.85 x 10¹⁴ Hz

The wavelength of the photon is given by:

λ = c / νλ = 2.998 × 10⁸ m/s / 2.85 x 10¹⁴ Hzλ = 1.05 × 10⁻⁶ m

Therefore, the wavelength of the photon absorbed for a transition of an electron from the n = 3 state that results in the least energetic spectral line in the infrared series of the atom is 1.05 × 10⁻⁶ m (rounding to significant figures).

Learn more about energy: https://brainly.com/question/25959744

#SPJ11

Answer:

The meltdown in which of the following structures at a nuclear power plant, such as Chernobyl, would most likely lead to the accidental release of radiation is reactor core. Answer:e

Explanation:

What is the Chernobyl nuclear disaster?

The Chernobyl nuclear disaster was a catastrophic nuclear accident that occurred on April 26, 1986, at the No. 4 reactor in the Chernobyl Nuclear Power Plant, located in the northern Ukrainian Soviet Socialist Republic.

The explosion and subsequent fires resulted in the release of significant amounts of radioactive material into the atmosphere, as well as widespread contamination of the environment.

What was the cause of the Chernobyl nuclear disaster?

During a reactor systems test, an unforeseen combination of factors caused the core of one of Chernobyl's reactors to overheat and explode, releasing radioactive material into the surrounding area. The resulting steam explosion and fires killed two plant workers at the time of the accident and injured hundreds of others.

The explosion also resulted in the deaths of dozens of firefighters and other emergency workers in the aftermath of the disaster.

What was the impact of the Chernobyl nuclear disaster on the environment?

The Chernobyl nuclear disaster resulted in the release of significant quantities of radioactive material, including iodine-131 and cesium-137, which have been linked to a variety of environmental issues. These substances are still present in the environment, and their long-term effects on humans and wildlife are still being investigated.

However, the disaster has had a significant impact on the environment in the years following the accident, including the contamination of water and soil, the displacement of wildlife, and the potential long-term health effects on local populations.

To know more about Chernobyl nuclear disaster refer here:https://brainly.com/question/10116000#
#SPJ11

The pH of the given solution after adding 0.0060 mol of HCl to a 1L buffer solution is 9.76. So, the correct option is B.

Buffer solutions are prepared to prevent drastic changes in pH when acid or base is added to them. When the acid or base is added to the buffer solution, it reacts with the buffer system to form a weak acid or a weak base. The buffer system should contain both a weak acid and its corresponding weak base.

A buffer solution is formed by the mixture of a weak acid and a salt of its conjugate base (or) weak base and a salt of its conjugate acid. In this question, the buffer system consists of phenol and sodium phenolate. Phenol is a weak acid and sodium phenolate is a salt of its conjugate base. The equation for the reaction between the phenol and sodium phenolate is given below.

C6H5OH (aq) + C6H5ONa (aq) → C6H5O- (aq) + C6H5OH2+ (aq)
Initial concentrations of the phenol and the sodium phenolate are given below.
[C6H5OH] = 0.213 M
[C6H5O-] = 0.132 M
After adding 0.0060 mol of HCl, the number of moles of the phenol and sodium phenolate are given below.
Moles of phenol = 0.213 mol/L × 1 L = 0.213 mol
Moles of sodium phenolate = 0.132 mol/L × 1 L = 0.132 mol

After the addition of HCl, the phenol present in the solution reacts with it to form the conjugate base of phenol i.e., phenolate ion.
C6H5OH (aq) + HCl (aq) → C6H5O- (aq) + H2O (l) + Cl- (aq)
0.0060 mol of HCl reacts with the phenol present in the solution to form 0.0060 mol of phenolate ions. The new number of moles of phenolate ion and phenol are given below.

Moles of phenolate ion = 0.132 + 0.0060 = 0.138 mol
Moles of phenol = 0.213 - 0.0060 = 0.207 mol
The new concentrations of the phenol and phenolate ions are calculated by dividing the number of moles by the volume of the solution.
New concentration of phenolate ion = 0.138 mol/1 L = 0.138 M
New concentration of phenol = 0.207 mol/1 L = 0.207 M
The expression for the pH of the buffer solution is given below.
pH = pKa + log([A-]/[HA])

Where
pKa = -log Ka
Ka is the dissociation constant of the weak acid
[HA] is the concentration of the weak acid
[A-] is the concentration of the conjugate base
In the given question, phenol is the weak acid and phenolate ion is its conjugate base. The Ka value of phenol is 1.0 × 10-10.
pKa = -log Ka = -log 1.0 × 10-10 = 10

Substitute the given values in the equation for pH.
pH = 10 + log ([phenolate ion]/[phenol])
pH = 10 + log (0.138/0.207)
pH = 9.76
Therefore, the pH of the given solution after adding 0.0060 mol of HCl to a 1L buffer solution is 9.76.

You can learn more about buffer solution at: brainly.com/question/24262133

#SPJ11

The main site for water reabsorption along the nephron is the renal tubules

Particularly the proximal tubule and the descending limb of the loop of Henle. As filtrate flows through the renal tubules, water and solutes are selectively reabsorbed into the bloodstream, with the majority of water reabsorption occurring in the proximal tubule. In this region, water is reabsorbed via osmosis, facilitated by the presence of aquaporin channels in the apical and basolateral membranes of the tubule cells. The descending limb of the loop of Henle is also important for water reabsorption, as it is permeable to water but not solutes, allowing for the creation of a concentration gradient that facilitates water reabsorption in the later parts of the nephron.

To know more about nephron, here

brainly.com/question/30975111

#SPJ4

The atmosphere, which is represented by Area 1, is the main source of nitrogen on Earth. About 78% of the Earth's atmosphere is made up of nitrogen gas (N2), which is essential to numerous industrial and biological processes.

Sadly, I am unable to give a precise response without access to the question's referenced illustration. I can, however, give some general knowledge about the nitrogen cycle and the various nitrogen reserves on Earth.

The environment contains nitrogen, an element that is necessary for life, in a variety of forms, including nitrogen gas (N2), ammonia (NH3), nitrite (NO2), nitrate (NO3-), and organic nitrogen. A number of biological and chemical mechanisms are used in the nitrogen cycle to change nitrogen's form and transfer it through various reservoirs.

The atmosphere, which contains around 78% nitrogen gas, is the planet's biggest source of nitrogen. Unfortunately, most organisms cannot access atmospheric nitrogen directly; instead, it must be transformed into a useful form through  nitrogen fixation. Nitrogen fixation is the process of converting atmospheric nitrogen into ammonia or other organic nitrogen compounds, which can be taken up by plants and other organisms.

learn more about nitrogen gas  here:

https://brainly.com/question/11426882

#SPJ4

According to the question isotope X is 214Bi, and alpha decay occurs.

An isotope is a form of an element that has the same number of protons but a different number of neutrons. Isotopes have the same atomic number and are chemically identical, but the number of neutrons in the nucleus can vary, resulting in different masses or weights. Isotopes can be either stable or unstable and can be used for a number of applications, from medical treatments to energy production. Stable isotopes are found naturally in the environment, while unstable isotopes must be created in a laboratory. Stable isotopes are used for a variety of purposes including dating objects, tracing the movement of elements, and analyzing the diet and migration patterns of animals. Unstable isotopes are used in the field of nuclear medicine and in the production of energy through nuclear power plants. Isotopes are also used in many industries and research labs to study the physical, chemical, and biological properties of elements.

To learn more about isotope

https://brainly.com/question/14220416

#SPJ1

According to the given equilibrium concentrations, the system is said to be at equilibrium as the concentration of substances does not change.

Kc can be calculated by dividing the product of the concentrations of the products by the product of the concentrations of the reactants, each raised to the power corresponding to its stoichiometric coefficient.

The expression for Kc, which is a measure of the equilibrium constant, is: [COCl₂]/[CO][Cl₂] = 1.5 × 10⁴

Equilibrium concentrations: [COCl₂] = 0.0040 M

[CO] = 0.00021 M

[Cl₂] = 0.00040 M

Substituting the values into the equilibrium constant expression:

[COCl₂]/[CO][Cl₂] = (0.0040) / [(0.00021) (0.00040)] =1.5 × 10⁴

The numerical value of the expression is the same as the numerical value of Kc. As a result, the system is already in equilibrium since it has the same equilibrium constant value as the one provided. No shift is necessary to attain equilibrium as it is already achieved.

Learn more about Equilibrium here:

https://brainly.com/question/30694482

#SPJ11

The order of oxyacids in decreasing acid strength is:

This order of  oxyacids is based on the number of oxygen atoms bonded to the central atom (in this case, Cl or Br) and the strength of the bond between the central atom and the oxygen atoms. The more oxygen atoms that are bonded to the central atom, the stronger the acid. Additionally, the strength of the bond between the central atom and the oxygen atoms increases as the electronegativity difference between the two atoms increases, making the acid stronger. HClO3 has the most oxygen atoms and the strongest bond, making it the strongest acid, while HBrO has the fewest oxygen atoms and the weakest bond, making it the weakest acid.

Find more exercises on  oxyacids;

https://brainly.com/question/14179541

#SPJ1

The density of the liquid is 0.562 g/mL, the volume in milliliters is about 1.59 mL, and the mass of 0.285mL sample is about 0.224 grams.

The formula for density is as follows:

Density = mass/volume

Density = 0.155 g/0.000275 L= 562.1 g/L

We know that, 1 L = 1000 mL

So, Density = 562.1 g/L × 1 L/1000 mL= 0.562 g/mL

The density of the given liquid is 0.562 g/mL.

Density = mass/volume

Rearranging the above formula we get,

Volume = mass/density

Density = 3.03 g/mL, Mass = 4.83 g

Volume = 4.83 g/3.03 g/mL= 1.59 mL

Therefore, the volume in milliliters of a 4.83 g sample of a solid with a density of 3.03 g/mL is 1.59 mL.

Mass = density × volume

M = D × V

Density = 0.789 g/mL, Volume = 0.285 mL

Mass = 0.789 g/mL × 0.285 mL= 0.224 g

Therefore, the mass of a 0.285-mL sample of a liquid with density 0.789 g/mL is 0.224 g.

Learn more about Density here:

https://brainly.com/question/29775886

#SPJ11

When the pH of a solution is given and the solution is of a weak acid, you can use the pH to find the percent ionization.

The percent ionization for a weak acid is calculated by the formula:

% ionization = Ka / [HA] x 100.

Ka is the acid dissociation constant, and [HA] is the initial concentration of the weak acid. In this case, we have nitrous acid (HNO2), which is a weak acid with a dissociation constant of 4.5 x 10⁻⁴.

To calculate the percent ionization of a 0.125 M solution of nitrous acid (HNO2) with a pH of 2.0, we can first use the pH to find the concentration of H+ in the solution,

then use that to calculate the concentration of HNO2 (the weak acid), and finally use both of those values to calculate the percent ionization. Step-by-step explanation:

From the pH, we know that: pH = -log[H+]. Rearranging this equation gives us: [H+] = 10⁻⁴ pH. Plugging in the pH of 2.0, we get: [H+] = 10⁻².0 = 0.01 M. Since HNO2 is a weak acid, it does not dissociate completely in the solution.

Instead, it dissociates according to the equation:

HNO₂ + H₂O ↔ H₃O+ + NO₂⁻.

The equilibrium constant expression for this reaction is Ka = [H3O+][NO2-] / [HNO2]. Since HNO2 is a weak acid, we can assume that it does not dissociate completely, so the concentration of HNO2 at equilibrium will be equal to the initial concentration.

Therefore, we can simplify the expression to Ka = [H3O+]² / [HNO2].

Rearranging this equation gives us: [HNO2] = [H3O+]² / Ka. Plugging in the values we found above, we get [HNO2] = (0.01 M)² / 4.5 x 10⁻⁴ = 0.222 M.

Now we can use both the concentration of HNO2 and the dissociation constant to calculate the percent ionization using the formula: % ionization = Ka / [HA] x 100.

Plugging in the values we found above, we get % ionization = 4.5 x 10⁻⁴ / 0.125 M x 100 = 0.36%.

Therefore, the percent ionization of a 0.125 M solution of nitrous acid (HNO2) with a pH of 2.0 is 0.36%.

Learn more about percent ionization at brainly.com/question/14225136

#SPJ11

Answer: 2.77

Explanation: pH=-log[H+] (=-log[H3O+])

pH=-log[1.7*10^-3]=2.77

There are the presence of atoms on eight corners of the face centered cubic lattice.

Void spaces are called as the gaps that lie within certain constituent particles. These void spaces are highly packed and they can be packed in 1D, 2D, or 3D. Such complexes are seen in many complexes such as coordination complexes. The face-centered cubic lattice which is called FCC is described as the arrangement in which there is an arrangement of atoms at corners as well as at the center of cell's each cube face. There is the presence of four atoms in one unit cell in such lattices. This is a cube with an atom on each corner and each face. It has atoms at each corner of the cube and six atoms at each face of the cube.

a= 5.01°A on each side.

To learn more about  face-centered cubic lattice

https://brainly.com/question/14927070

#SPJ4

The complete question is,

In modeling solid-state structures, atoms and ions are most often modeled as spheres. A structure build using spheres will have some empty, or void, space in it. A measure of void space in a particular structure is the packing efficiency, defined as the volume occupied by the spheres divided by the total volume of the structure.

Given that a solid crystallizes in a face centered cubic structure that is 5.01 A on each side.

How many total atoms are there in each unit cell?

The spectator ions in the reaction between silver nitrate and hydroiodic acid are nitrate ions (NO₃₋) and hydrogen ions (H⁺).

In order to identify the spectator ions in this reaction, we need to first write out the balanced chemical equation for the reaction:

AgNO₃(aq) + HI(aq) → AgI(s) + HNO₃(aq)

In this equation, the silver nitrate (AgNO₃) reacts with hydroiodic acid (HI) to produce a precipitate of silver iodide (AgI) and nitric acid (HNO₃).

The spectator ions are those ions that do not participate in the reaction, but remain in the solution unchanged. In this case, the nitrate ions (NO₃₋) from silver nitrate and the hydrogen ions (H⁺) from hydroiodic acid are the spectator ions, as they are present on both the reactant and product side of the equation.

In other words, the nitrate ions and hydrogen ions are not involved in the formation of the precipitate of silver iodide, and do not undergo any chemical change themselves.

Learn more about chemical reaction: https://brainly.com/question/11231920

#SPJ11

76 grams of potassium chloride will not dissolve in 100 grams of water at 20°C.

The solubility of potassium chloride in water at 20°C is approximately 34 grams per 100 grams of water.

So, if 100 grams of water can dissolve 34 grams of potassium chloride, then the maximum amount of potassium chloride that can be dissolved in 100 grams of water at 20°C is 34 grams.

Therefore, the amount of potassium chloride that will not dissolve in 100 grams of water at 20°C is:

110 grams - 34 grams = 76 grams

Learn more about solubility here: https://brainly.com/question/23946616

#SPJ1

The balanced equation for the reaction of chromium and sulfuric acid is: 2Cr + 3H2SO4 → Cr2(SO4)3 + 3H2. The sum of the coefficients is 9.

Make sure the number of atoms of each element on either side of the equation is equal. To do this, you can start by counting the atoms of each element on either side of the equation and making sure they are equal.

There are 2 chromium atoms on the left side, and 2 chromium atoms on the right side. There are also 3 hydrogen atoms on the left side, and 3 hydrogen atoms on the right side.

Finally, there are 3 sulfur atoms on the left side and 3 sulfur atoms on the right side.

Once you have established that the atoms are equal, you must then make sure that the coefficients are equal. To do this, you must multiply each atom on the left side by a coefficient.

The smallest set of whole number coefficients for this equation is 2Cr, 3H2SO4 on the left side, and Cr2(SO4)3 and 3H2 on the right side. This means that the sum of the coefficients is 9.

to know more coefficient refer here:

https://brainly.com/question/28975079#

#SPJ11

3. a) One possible mechanism for this reaction is: 3 Fe + 4 H₂O ⇌ Fe₃O₄ + 4 H₂

b) A catalyst is a substance that increases the rate of a chemical reaction without undergoing any permanent chemical change itself.

c) second-order reaction.

4. a) The expression of the equilibrium constant for the given reaction is:

Kc = ([Fe₃O₄][H₂]⁴) / ([Fe]³[H₂O]⁴)

b) Increasing the pressure will favor the indirect reaction and slow down the direct reaction.

c) Since the indirect reaction is favored by the increased pressure, the chemical equilibrium will shift to the right, towards the product side.

The method of initial rates involves measuring the initial rate of the reaction under different initial concentrations of the reactants. By comparing the initial rates, we can determine the order of the reaction with respect to each reactant.

Assuming that the rate law of the reaction is:

rate = k[Fe]^x[H₂O]^y

where k is the rate constant, and x and y are the orders of the reaction with respect to Fe and H2O, respectively.

Experimentally, measure the initial rate of the reaction under different initial concentrations of Fe and H₂O while keeping the concentration of the other reactant constant.

For example, suppose we measure the initial rates of the reaction at the following initial concentrations:

Experiment #1: [Fe] = 0.1 M, [H₂O] = 0.2 M, initial rate = 0.005 M/s

Experiment #2: [Fe] = 0.2 M, [H₂O] = 0.2 M, initial rate = 0.02 M/s

Experiment #3: [Fe] = 0.4 M, [H₂O] = 0.2 M, initial rate = 0.08 M/s

Use the rate data to determine the orders of the reaction with respect to Fe and H₂O. To do this, we compare the initial rates of the reaction under different initial concentrations of Fe and H₂O while keeping the concentration of the other reactant constant.

Suppose we double the concentration of Fe while keeping the concentration of H₂O constant. According to experiment 2 and experiment 1, the rate of the reaction doubles. This means that the order of the reaction with respect to Fe is 1.

Similarly, if we double the concentration of H₂O while keeping the concentration of Fe constant, we can see that the rate of the reaction doubles from experiment 1 to experiment 3. This means that the order of the reaction with respect to H₂O is also 1.

Therefore, the overall order of the reaction is the sum of the orders of the reactants, which is:

overall order = 1 + 1 = 2

Hence, the given reaction is a second-order reaction.

Learn more here on mechanisms here: https://brainly.com/question/27921705

#SPJ1

The complete question is:

3. For the reaction at equilibrium: 3Fe+410 Fe,0+4H a) Identify a possible mechanism. b) Define catalyst c) Determine the general order of the reaction. 4. For the reaction at equilibrium: 3Fe+410 Fe,0+4H a) Write the expression of the equilibrium constant. b) Show how the speed of the direct and indirect reaction changes, if the pressure increases 3 times. e) Argue whether the chemical equilibrium shifts when the pressure increases 3 times. (4 points)​

The main difference between a saturated solution and a supersaturated solution is concentration of the solute.

A saturated solution contains the maximum amount of solute that can be dissolved under the given conditions, while a supersaturated solution contains more solute than is normally possible. A saturated solution contains the maximum amount of solute that can be dissolved in a given solvent at a specific temperature and pressure. In a saturated solution, the concentration of solute is in equilibrium with the concentration of undissolved solute, which is in dynamic equilibrium with the dissolved solute. A supersaturated solution, on the other hand, is a solution that contains more solute than is normally possible to dissolve in the solvent under the given conditions.

To know more about  supersaturated solution, here

brainly.com/question/16817894

#SPJ4