The estimated net force exerted on your eardrum due to the water above when you are swimming at the bottom of a 5.3 m deep pool is approximately 2.6 Newtons.
Water containers and gas cans often have a second, smaller cap opposite the spout to let air flow in as liquid is poured out and to keep the space above the liquid at the same pressure as outside while pouring. This design allows for a smoother, more controlled flow of liquid and prevents glugging or splashing that could result from an imbalance in pressure.
Regarding the net force exerted on your eardrum while swimming at the bottom of a pool that is 5.3 m deep, we can use the following formula to estimate it:
Pressure = (density of water) × (acceleration due to gravity) × (depth)
Assuming freshwater, the density is approximately 1000 kg/m³, and the acceleration due to gravity is about 9.81 m/s². So, the pressure at 5.3 m depth is:
Pressure = (1000 kg/m³) × (9.81 m/s²) × (5.3 m)
Pressure = 51993 Pa (Pascals)
The net force exerted on the eardrum can be calculated using the formula:
Force = (Pressure) × (Area)
The average human eardrum has an area of about 0.00005 m². Therefore, the net force exerted is:
Force = (51993 Pa) × (0.00005 m²)
Force ≈ 2.6 N (Newtons)
To know more about force visit:
brainly.com/question/28043002
#SPJ11
A duck is floating on a lake with 28 % of its volume beneath the water. What is the average density of the duck?
The average density of the duck is determined to be 0.28 times the density of water.
What is the ratio between the duck's density and the density of water?To determine the average density of the duck, we can use the principle of buoyancy. When an object floats, it displaces a volume of liquid equal to its own weight. Therefore, the weight of the duck is balanced by the weight of the liquid it displaces.
Let's assume the total volume of the duck is V. Since 28% of its volume is beneath the water, the volume of water displaced by the duck is 0.28V.
The density of water is generally close to 1 g/cm³ or 1000 kg/m³. We can use this value to calculate the average density of the duck.
The weight of the water displaced by the duck is given by:
Weight of water = Density of water × Volume of water = 1000 kg/m³ × 0.28V
Since the weight of the duck is balanced by the weight of the water, the average density of the duck can be calculated as:
Average density of the duck = Weight of the duck / Volume of the duck
Since the weight of the duck is equal to the weight of the water displaced, we have:
Average density of the duck = Weight of water / Volume of the duck = (1000 kg/m³ × 0.28V) / V = 280 kg/m³
Therefore, the average density of the duck is 280 kg/m³.
Learn more about density
brainly.com/question/29775886
#SPJ11
for the polynomial a(s)=s 5 5s4 11s3 23s2 28s 12 determine how many poles are on the r.h.p, l.h.p. and jω axis
For the polynomial a(s), there are 0 poles in the R.H.P, 5 poles in the L.H.P, and 0 poles on the jω axis.
The given polynomial is a(s) = s^5 + 5s^4 + 11s^3 + 23s^2 + 28s + 12. To determine the number of poles on the right-half plane (R.H.P), left-half plane (L.H.P), and jω axis, we need to find the roots of the polynomial, which represent the poles of the system.
The Routh-Hurwitz criterion can be used to determine the number of poles in the R.H.P without explicitly finding the roots. Using the Routh-Hurwitz criterion, we form a Routh array. For this polynomial, the array is as follows:
s^5: | 1 11 28 |
s^4: | 5 23 12 |
s^3: | 3.4 8.2 |
s^2: | 23 12 |
s^1: | 20.45 |
s^0: | 12 |
There are no sign changes in the first column, so there are no poles in the R.H.P. To find the total number of poles on the L.H.P, subtract the number of poles in the R.H.P (which is 0) from the polynomial's order (5 in this case), which gives us 5 poles on the L.H.P.
As for the poles on the jω axis, this polynomial has real coefficients, so any purely imaginary roots will occur in conjugate pairs. Since we already know that there are 5 poles in the L.H.P and none in the R.H.P, there can't be any poles on the jω axis.
To know more about poles visit:
https://brainly.com/question/14929963
#SPJ11
Some one please help me :(
What level of demand is placed on a CPU by media development software
and games?
OA. High
OB. Medium
OC. Low
OD. Low to medium
The level of demand placed on a CPU by media development software and games is typically considered to be high. Therefore, option D is correct.
Media development software, such as video editing programs or 3D modeling software, often requires significant processing power to handle complex tasks like rendering graphics, processing large files, and performing real-time calculations.
Similarly, games, especially modern and graphics-intensive ones, can put a heavy load on the CPU. Games require processing power to handle tasks like physics simulations, AI calculations, rendering high-resolution graphics, and running multiple threads simultaneously.
Learn more about CPU, here:
https://brainly.com/question/31034557
#SPJ1
an electron is placed in an electric field of 60.6 n/c to the left. what is the resulting force on the electron? a.2.64 ✕ 10−21 n right b.9.70 ✕ 10−18 n left c.2.64 ✕ 10−21 n left d.9.70 ✕ 10−18 n right
This means that the resulting force on the electron is 9.70 x 10^-18 N to the left. Therefore, the correct answer is option b) 9.70 x 10^-18 N left.
The resulting force on an electron placed in an electric field of 60.6 n/c to the left can be calculated using the formula F = qE, where F is the force, q is the charge of the electron, and E is the electric field strength. The charge of an electron is negative (-1.6 x 10^-19 C).
So,
F = (-1.6 x 10^-19 C) x (60.6 n/c to the left)
F = -9.696 x 10^-18 N
This means that the resulting force on the electron is 9.70 x 10^-18 N to the left. Therefore, the correct answer is option b) 9.70 x 10^-18 N left.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ11
augmented feedback can consist of information about kinetic and kinematic behavior T/F?
True. Augmented feedback in motor learning can include information about both kinetic (forces and torques) and kinematic (motion and movement) behavior. It provides additional information to learners to enhance their understanding and improve skill acquisition.
True. Augmented feedback in motor learning can consist of information about both kinetic and kinematic behaviour. Kinetic behaviour refers to the forces and torques involved in the movement, such as muscle activation patterns or joint forces. This type of feedback can help learners understand the magnitude and direction of forces acting during the movement. Kinematic behavior, on the other hand, focuses on motion and movement patterns, including factors like joint angles, velocity, and trajectory. Feedback regarding kinematic behaviour provides learners with information about the execution and coordination of movements. By incorporating both kinetic and kinematic information, augmented feedback can offer comprehensive guidance to enhance motor learning and performance.
Learn more about Kinetic behaviour here:
https://brainly.com/question/32183917
#SPJ11
2'
1. List out names of material in Table as you test them
152
PHYSICS ASSIGNMENT:- a. Reflect all or most of the light bounces back (Transparent medium) b. Partially reflect light( Translucent medium) C. Absorbe NO light bounces back.
The behavior of light reflection and transmission can vary depending on the specific characteristics and properties of the materials.
A list of materials based on the description
a. Reflect all or most of the light bounces back (Transparent medium):
Glass
Clear plastic
Air (in certain conditions)
b. Partially reflect light (Translucent medium):
Frosted glass
Wax paper
Tinted glass
Some types of plastics
c. Absorb no light bounces back (Opaque medium):
Wood
Metal
Cardboard
Brick
Rubber
Most fabrics
Please note that this is a general list, and the behavior of light reflection and transmission can vary depending on the specific characteristics and properties of the materials.
To know more about light reflection here
https://brainly.com/question/12271361
#SPJ4
3) an electric field is given by ex = 2.0x3 kn/m3 c. find the potential difference between the points on the x-axis at x = 1 m and x = 2 m.
The potential difference between the points on the x-axis at x = 1 m and x = 2 m is 7.5 volts (V).
To find the potential difference between the points on the x-axis at x = 1 m and x = 2 m, we need to integrate the given electric field expression.
The potential difference (V) between two points in an electric field is given by the equation:
V = ∫ E dx
where E is the electric field and dx is an infinitesimally small displacement along the x-axis.
In this case, the electric field is given as Ex = 2.0x³ kN/m³ C.
To find the potential difference between x = 1 m and x = 2 m, we integrate the electric field expression over that interval:
V = [tex]\int\limits^2_1[/tex] Ex dx
V = [tex]\int\limits^2_1[/tex](2.0x³ kN/m³ C) dx
V = 2.0 [tex]\int\limits^2_1[/tex](x³) dx
Integrating x³ with respect to x gives us:
V = 2.0 * [1/4 * x⁴] evaluated from 1 to 2
V = 2.0 * [1/4 * (2⁴) - 1/4 * (1⁴)]
V = 2.0 * [1/4 * 16 - 1/4 * 1]
V = 2.0 * [4 - 1/4]
V = 2.0 * [16/4 - 1/4]
V = 2.0 * [15/4]
V = 30/4
V = 7.5 V
Learn more about integral: https://brainly.com/question/31059545
#SPJ11
a point charge is located exactly at the center of an imaginary gaussian surface in the shape of a cube
The electric field due to the point charge located at the center of the cube can be calculated using Gauss's law and is given by E = charge / (ε0 x A).
If a point charge is located exactly at the center of an imaginary Gaussian surface in the shape of a cube, then the electric field due to the charge can be calculated using Gauss's law. According to Gauss's law, the flux of the electric field through any closed surface is equal to the charge enclosed by the surface divided by the permittivity of free space. In this case, since the charge is located at the center of the cube, the electric field will be uniform and directed towards the faces of the cube. Moreover, since the cube is symmetric, the electric field will have the same magnitude on all faces of the cube.
To calculate the electric field using Gauss's law, we need to find the net charge enclosed by the cube. Since the charge is located at the center of the cube, the net charge enclosed by the cube will be equal to the charge itself. Hence, we can write
flux = charge / ε0
where ε0 is the permittivity of free space. The flux through each face of the cube will be equal since the electric field is uniform and directed towards each face. Hence, we can write
flux = E x A
where E is the magnitude of the electric field and A is the area of each face of the cube.
Equating the above two equations, we get
E x A = charge / ε0
Solving for E, we get
E = charge / (ε0 x A)
Hence, the electric field due to the point charge located at the center of the cube can be calculated using Gauss's law and is given by E = charge / (ε0 x A).
To know more about Electric Field visit:
https://brainly.com/question/15800304
#SPJ11
in part d, how are the potential differences across the resistor, inductor, and capacitor related to the potential difference across the ac source?
In part d, the potential differences across the resistor, inductor, and capacitor are related to the potential difference across the AC source through the principles of voltage division.
Sources are as follows:
1. Potential difference across the resistor (V_R): V_R = I * R, where I is the current flowing through the resistor and R is the resistance of the resistor.
2. Potential difference across the inductor (V_L): V_L = L * (dI/dt), where L is the inductance of the inductor, and dI/dt is the rate of change of current with respect to time.
3. Potential difference across the capacitor (V_C): V_C = Q / C, where Q is the charge stored on the capacitor and C is the capacitance of the capacitor.
The potential difference across the AC source (V_source) is the sum of the potential differences across the resistor, inductor, and capacitor: V_source = V_R + V_L + V_C.
This relationship shows how the potential differences across the resistor, inductor, and capacitor contribute to the overall potential difference across the AC source in a circuit.
You can learn more about potential differences at: https://brainly.com/question/23716417
#SPJ11
If you double the area of a parallel plate capacitor and quadruple the distance between the plates,
what affect does this have on the capacitance?
The capacitance of the parallel plate capacitor is reduced to half.
A parallel plate capacitor is a device that has two parallel plates connected across a battery. The parallel plate capacitor charges the plates and creates an electric field between them.
The expression for capacitance of a parallel plate capacitor is given by,
C = εA/d
From the equation it is clear that the capacitance is directly proportional to the area of the plates and inversely proportional to the distance between the plates.
C'/C = 2A x d/(A x 4d)
C'/C = 1/2
Therefore, C' = C/2.
To learn more about parallel plate capacitor, click:
https://brainly.com/question/12733413
#SPJ1
an initially uncharged electroscope consists of two thin, 50 cm long conducting wires attached to a cap, with a 25 g conducting sphere attached to the other end of each wire. when a charged rod is brought close to but not touching the cap, as shown above, the spheres separate a distance of 30 cm. what can be determined about the induced charge on each sphere from this information?
Each sphere has a negative charge of [tex]4.48 x 10^-9 C[/tex] induced on it by the charged rod.
Based on the given information, we can conclude that the initially uncharged electroscope has become charged through the process of induction. The charged rod, when brought close to the cap, induces a separation of charges in the electroscope. The electrons in the conducting wires are repelled by the negative charge on the rod, causing them to move towards the spheres. This results in a separation of charges, with the spheres becoming negatively charged and the wires becoming positively charged.
The magnitude of the induced charge on each sphere can be determined using Coulomb's law. Since the spheres are identical in size and shape, they will have the same charge magnitude. The equation for Coulomb's law is:
[tex]F = k(q1q2 / r^2)[/tex]
where F is the electrostatic force, k is Coulomb's constant ([tex]9 x 10^9 Nm^2/C^2[/tex]), q1 and q2 are the magnitudes of the charges on the two spheres, and r is the distance between them (0.3 m).
Since the spheres are separated by 30 cm, or 0.3 m, we can use this distance in Coulomb's law to solve for the magnitude of the charge on each sphere. Rearranging the equation, we get:
[tex]q1q2 = Fr^2 / k[/tex]
Plugging in the given values, we get:
[tex]q1q2 = (9 x 10^9 Nm^2/C^2) x (25 g) x (9.8 m/s^2) x (0.3 m)^2 / 2 = 20.1 x 10^-9 C^2[/tex]
Since the spheres have the same charge magnitude, we can take the square root of this value to find the magnitude of the charge on each sphere:
q1 = q2 = sqrt(20.1 x 10^-9) = 4.48 x 10^-9 C
Learn more about charged rod here :-
https://brainly.com/question/30696850
#SPJ11
An object is located at a distance of 15.5 cm in front of a concave mirror whose focal length is f = 10.5 cm. (a) Write an expression for the image distance. (b) Numerically, what is this distance?
(a) Expression for image distance: 1/f = 1/d_o + 1/d_i. (b) Numerically, the image distance is 6.3 cm when the object is located 15.5 cm in front of a concave mirror with f = 10.5 cm.
For a concave mirror, the relationship between the object distance (d_o), image distance (d_i), and focal length (f) can be expressed using the mirror equation: 1/f = 1/d_o + 1/d_i. In this scenario, the object is located at a distance of 15.5 cm in front of the concave mirror, and the focal length is given as 10.5 cm. By substituting the known values into the equation, we can solve for the image distance. Rearranging the equation, we get 1/d_i = 1/f - 1/d_o. Plugging in the values, we find 1/d_i = 1/10.5 cm - 1/15.5 cm. Calculating this expression gives us 1/d_i ≈ 0.0952 cm^(-1). Taking the reciprocal of both sides, we find d_i ≈ 10.5 cm. Thus, numerically, the image distance is approximately 6.3 cm.
Learn more about concave mirror here:
https://brainly.com/question/13101215
#SPJ11
Si el campo E asociado a una bola es radial con magnitud 1x 106 N/C calcula el valor de la fuerza si la carga de prueba es de 4nC.
The E field associated with a ball is radial with magnitude 1x[tex]10^{6}[/tex] N/C. The value of the force experienced by the test charge is 4 * [tex]10^{-3}[/tex] N (newtons).
To calculate the value of the force experienced by the test charge, we can use the formula:
F = q * E
Where F is the force, q is the charge, and E is the magnitude of the electric field.
Given:
Magnitude of the electric field (E) = 1x[tex]10^{6}[/tex] N/C
Test charge (q) = 4 nC (4 * [tex]10^{-9}[/tex] C)
Substituting the values into the formula:
F = (4 * [tex]10^{-9}[/tex] C) * (1x[tex]10^{6}[/tex] N/C)
F = 4 * [tex]10^{-9}[/tex] * 1x[tex]10^{6}[/tex] N
F = 4 * [tex]10^{-9}[/tex] * [tex]10^{6}[/tex] N
F = 4 * [tex]10^{-9}[/tex] * [tex]10^{6}[/tex]N
F = 4 * [tex]10^{-3}[/tex] N
Therefore, the value of the force experienced by the test charge is 4 * [tex]10^{-3}[/tex] N (newtons).
The question is '' If the E field associated with a ball is radial with magnitude 1x[tex]10^{6}[/tex] N/C, calculate the value of the force if the test charge is 4nC ''.
To know more about force here
https://brainly.com/question/28680603
#SPJ4
the sun, a star that is brighter than about 80% of the stars in the galaxy, is by far the most massive member of the solar system. what percentage of the total mass in the solar system does the sun contain?
the heating element of a toaster dissipates 2200 ww when connected to a 120 vv //60 hzhz power line. part a what is its resistance? express your answer in ohms.
The resistance of the heating element in the toaster is 6.54 ohms.
The heating element of a toaster dissipates 2200 W (watts) when connected to a 120 V (volts) and 60 Hz (hertz) power line.
To find the resistance (R) of the heating element, we can use Ohm's Law:
V = I * R
where,
V = voltage
I = current
R = resistance
First, we need to find the current (I) using the power equation:
P = V * I
Rearrange for I:
I = P / V
Substitute the given values:
I = 2200 W / 120 V = 18.33 A (amperes)
To find the resistance, use Ohm's Law
120 V = 18.33 A * R
Rearrange for R:
R = V / I
Substitute the values:
R = 120 V / 18.33 A = 6.54 Ω (ohms)
So, the resistance of the heating element in the toaster is approximately 6.54 ohms.
know more about resistance here:
https://brainly.com/question/30901006
#SPJ11
he heisenberg uncertainty principle can be stated: a. one cannot with certainty define which quantum state a hydrogen atom is in. (True or False)
The statement "one cannot with certainty define which quantum state a hydrogen atom is in" is false as a statement of the Heisenberg uncertainty principle.
The Heisenberg uncertainty principle is a fundamental principle of quantum mechanics that states that there is a fundamental limit to how precisely certain pairs of physical properties of a particle, such as its position and momentum, or its energy and time, can be known simultaneously.
The principle applies to all particles, not just hydrogen atoms, and is a consequence of the wave-particle duality of quantum mechanics. Therefore, it does not state that one cannot with certainty define which quantum state a hydrogen atom is in.
For more question on quantum click on
https://brainly.com/question/26095165
#SPJ11
The statement given in the question is actually true. According to the Heisenberg uncertainty principle, it is not possible to simultaneously determine the position and momentum of a particle with absolute accuracy.
In the case of a hydrogen atom, the electron is in a quantum state that is determined by its energy level. However, the position and momentum of the electron cannot be determined with certainty, due to the Heisenberg uncertainty principle. This is because the act of measuring the position of the electron will disturb its momentum, and vice versa.
Therefore, it is not possible to know with absolute certainty which quantum state the hydrogen atom is in, as the uncertainty principle places a fundamental limit on the accuracy of our measurements.
Learn more about hydrogen atom here : brainly.com/question/29661778
#SPJ11
An X-ray photon has 38.0 keV of energy before it scatters from a free electron, and 33.6 keV after it scatters. What is the kinetic energy of the recoiling electron?
The kinetic energy of the recoiling electron is 33.6 Kev.
How can we find the kinetic Energy of the recoiling electron?First, we can find the initial momentum of the photon using its energy and the equation for the momentum of a photon:
p = E/c
where p is the momentum, E is the energy, and c is the speed of light.
So, the initial momentum of the photon is:
p1 = 38.0 keV / c
Next, we can use the conservation of momentum to find the final momentum of the photon and the recoiling electron:
p1 = p2 + p3
where p2 is the final momentum of the scattered photon and p3 is the momentum of the recoiling electron.
Since the photon scatters at a large angle from the electron, we can assume that the photon loses all its energy to the electron and is scattered at 180 degrees.
How can we find the final momentum of photon?p2 = 38.0 keV / c
So, the momentum of the recoiling electron is:
p3 = p1 - p2 = 0
This means that the recoiling electron is at rest after the scattering event, so all of the energy of the photon is transferred to the electron. Therefore, the kinetic energy of the recoiling electron is:
Kinetic Energy (K) = 33.6 keV
So the kinetic energy of the recoiling electron is 33.6 keV.
Learn more about Kinetic Energy.
brainly.com/question/15764612
#SPJ11
How does the practice of the World Health Organization taking vital statistics and ranking countries benefit the nations that it examines
the practice of the World Health Organization taking vital statistics and ranking countries benefit the nations that earth, It can highlight weak spots in health systems. Hence option A is correct.
The United Nations has a dedicated agency for worldwide public health called the World Health Organisation (WHO). It has 150 field offices globally, six regional offices, and its main office in Geneva, Switzerland.
The WHO was founded on April 7th, 1948. On July 24 of that year, the World Health Assembly (WHA), the organization's governing body, had its initial meeting. The WHO absorbed the resources, people, and obligations of the Office International d'Hygiène Publique and the League of Nations' Health Organisation, including the International Classification of Diseases (ICD). After receiving a large influx of financial and technical resources, it started working seriously in 1951.
To know more about Organization :
https://brainly.com/question/13278945
#SPJ1.
∗ 9.1 a center-fed hertzian dipole is excited by a current i0 = 20 a. if the dipole is λ/50 in length, determine the maximum radiated power density at a distance of 1 km.
The maximum radiated power density at a distance of 1 km from a center-fed Hertzian dipole can be determined using the formula: Pdmax = (30 * Pi^2 * i0^2 * L^2) / λ^2 * R^2. Where Pdmax is the maximum radiated power density, i0 is the current through the dipole, L is the length of the dipole, λ is the wavelength, and R is the distance from the dipole.
In this problem, the length of the dipole is given as λ/50, which means that L = λ/50. The wavelength can be calculated using the formula: λ = c / f. Where c is the speed of light (3 * 10^8 m/s) and f is the frequency. The frequency is not given in the problem, so we cannot calculate the wavelength.
To calculate the maximum radiated power density (P_rad), we can use the following formula: P_rad = (I0^2 * μ0 * c) / (32 * π^2 * R^2)
where:
- I0 = 20 A (the current)
- μ0 = 4π x 10^-7 H/m (permeability of free space)
- c = 3 x 10^8 m/s (speed of light)
- R = 1000 m (distance from the dipole).
To know more about wavelength visit:
https://brainly.com/question/13533093
#SPJ11
determine the depth h and the width b of the beam, knowing that l = 2 m, p = 40 kn, τm = 950 kpa, and σm = 12 mpa. (round the final answers to one decimal place.)
The depth of the beam h is approximately 15.4 cm and the width of the beam b is approximately 14.8 cm.
stress on the beam = σ = Mc/I
where M is the bending moment, c is the distance from the neutral axis to the extreme fiber, and I is the moment of inertia of the cross section.
The maximum bending moment occurs at the center of the beam
M = Pl/4
where P is the load and l is the length of the beam
moment of inertia of a rectangular cross section= I = (bh³)/12
b = width of the beam
h = depth of the beam
M = (40 kn)(2 m)/4 = 20 knm
I = (b(0.12 m)³)/12 = (b/10000) m⁴
Substituting these values into the expression for stress
σ = (20 kn m)(c)/((b/10000) m⁴)
The distance c is related to the depth h by:
c = h/2
substituting σ and τm into the expression for maximum shear stress
τm = (3/2)σ
h = √((6M)/(πbσm))
= √((6(20 kn m))/(πb(12 mpa))) ≈ 0.154 m ≈ 15.4 cm
b = (4Pl)/(σmπh²)
= (4(40 kn)(2 m))/(12 mpa π(0.154 m)²) ≈ 14.8 cm
The depth of the beam is approximately 15.4 cm and the width of the beam is approximately 14.8 cm.
Learn more about moment of inertia at:
brainly.com/question/15246709
#SPJ4
The energy of a photon is related to its frequency through the following equationE=hv where is the energy, his Planck's constant, and vis the frequency Rearrange the equation to solve for v. V=A photon has an energy of 2.84 x 10^-19J. What is the frequency of the photon?v= ___ Hz
The frequency of the photon is approximately 4.29 x 10^14 Hz.
To find the frequency (v) of a photon with a given energy (E), we'll first rearrange the equation E = h * v.
Step 1: Divide both sides of the equation by Planck's constant (h).
v = E / h
Step 2: Substitute the given energy value and Planck's constant value into the equation.
A photon has an energy of 2.84 x 10^-19 J. Planck's constant (h) is 6.626 x 10^-34 Js.
v = (2.84 x 10^-19 J) / (6.626 x 10^-34 Js)
Step 3: Calculate the frequency (v).
v ≈ 4.29 x 10^14 Hz
To know more about photon energy refer https://brainly.com/question/15946945
#SPJ11
Several bolts on the propeller of a fanboat detach, resulting in an offset moment of 5 lb-ft. Determine the amplitude of bobbing of the boat when the fan rotates at 200 rpm, if the total weight of the boat and pas- sengers is 1000 lbs and the wet area projection is approximately 30 sq ft. What is the amplitude at 1000 rpm?
The amplitude of the bobbing motion of the boat at 200 rpm is 1 rad. The amplitude of the bobbing motion of the boat at 1000 rpm is 0.039 rad.
How to determine amplitude?Assuming that the boat is at rest and the propeller starts to rotate at 200 rpm, the unbalanced force acting on the boat due to the offset moment of the detached bolts can be calculated as follows:
F = mω²A
where F = unbalanced force,
m = mass of the boat and passengers,
ω = angular velocity of the propeller in radians per second (ω = 2πf where f = frequency in Hz), and A = amplitude of the bobbing motion.
Using the given values, calculate the unbalanced force at 200 rpm:
ω = 2π(200/60) = 20.94 rad/s
m = 1000 lbs / 32.2 ft/s² = 31.06 slugs
F = 31.06 slugs × (20.94 rad/s)² × A
F = 13,431A lb-ft
Next, calculate the amplitude of the bobbing motion:
A = F/k
where k = stiffness of the boat in the vertical direction.
For a simple harmonic motion, k can be calculated as:
k = mω²
Substituting the values and solving for A:
k = 31.06 slugs × (20.94 rad/s)² = 13,431 lb-ft/rad
A = F/k = 13,431A lb-ft / 13,431 lb-ft/rad = A rad
A = 1 rad
Therefore, the amplitude of the bobbing motion of the boat at 200 rpm is 1 rad.
To calculate the amplitude at 1000 rpm, we can use the same equation:
A = F/k
But now the angular velocity of the propeller is:
ω = 2π(1000/60) = 104.72 rad/s
The unbalanced force is still 13,431A lb-ft, but the stiffness of the boat in the vertical direction changes due to the increase in frequency. For a simple harmonic motion, the stiffness is:
k = mω²
Substituting the values and solving for k:
k = 31.06 slugs × (104.72 rad/s)² = 343,548 lb-ft/rad
Now calculate the amplitude at 1000 rpm:
A = F/k = 13,431A lb-ft / 343,548 lb-ft/rad = 0.039A rad
A = 0.039 rad
Therefore, the amplitude of the bobbing motion of the boat at 1000 rpm is 0.039 rad.
Find out more on amplitude here: https://brainly.com/question/3613222
#SPJ4
Twelve resistors, each of resistance R Ohms, form a cube (see figure) (1) Find RaB, the equivalent resistance of an edge (2) Find RAc, the equivalent resistance of a face diagonal (3) Find RAG, the equivalent resistance of a body diagonal
The answers to the questions are:
(1) RaB = 2R Ohms
(2) RAc = 3R Ohms
(3) RAG = 4R Ohms
To find the equivalent resistances, we can use a combination of series and parallel resistance formulas. Let's analyze each case separately:
Equivalent resistance of an edge (RaB):
To find the equivalent resistance along an edge, we need to consider the resistors connected in series and parallel. If we consider one of the edges, it is formed by two resistors in series. Therefore, the equivalent resistance along the edge (RaB) is the sum of the resistances of these two resistors:
RaB = R + R = 2R
Hence, the equivalent resistance along an edge is 2R Ohms.
Equivalent resistance of a face diagonal (RAc):
To find the equivalent resistance along a face diagonal, we need to consider the resistors connected in series and parallel. If we consider one of the face diagonals, it is formed by three resistors in series. Therefore, the equivalent resistance along the face diagonal (RAc) is the sum of the resistances of these three resistors:
RAc = R + R + R = 3R
Hence, the equivalent resistance along a face diagonal is 3R Ohms.
Equivalent resistance of a body diagonal (RAG):
To find the equivalent resistance along a body diagonal, we need to consider the resistors connected in series and parallel. If we consider one of the body diagonals, it is formed by four resistors in series. Therefore, the equivalent resistance along the body diagonal (RAG) is the sum of the resistances of these four resistors:
RAG = R + R + R + R = 4R
Hence, the equivalent resistance along a body diagonal is 4R Ohms.
Here you can learn more about Ohms
https://brainly.com/question/30266391#
#SPJ11
xx rays with initial wavelength 6.80×10−2 nmnm undergo compton scattering. part a what is the largest wavelength found in the scattered xx rays?
The largest wavelength found in the scattered x-rays is 0.0845 nm.
How to determine largest wavelength?The Compton scattering formula is given by:
λ' - λ = h/mc (1 - cosθ)
where λ = initial wavelength, λ' = final wavelength, h = Planck's constant, m = mass of the electron, c = speed of light, and θ = scattering angle.
In this case, the initial wavelength is λ = 6.80×10⁻² nm. The largest wavelength found in the scattered x-rays occurs when the scattering angle is 180 degrees (backscatter).
Therefore, cosθ = -1, and the formula becomes:
λ' = λ + h/mc (1 + cosθ)
λ' = 6.80×10−2 nm + h/mc
Substituting the values for h, m, and c:
λ' = 6.80×10⁻² nm + (6.626×10⁻³⁴ J·s)/(9.109×10⁻³¹ kg)(2.998×10⁸ m/s)
λ' = 6.80×10⁻² nm + 0.0045 nm
λ' = 0.0845 nm
Therefore, the largest wavelength found in the scattered x-rays is 0.0845 nm.
Find out more on x rays here: https://brainly.com/question/24505239
#SPJ4
A particle moves along a line so that its position at any time t ≥ 0 is given by the function s(t) =−t3+7t2−14t+8 where s is measured in meters and t is measured in seconds.(a)Find the instantaneous velocity at any time t?(b) Find the acceleration of the particle at any time t?
To find the instantaneous velocity and acceleration of the particle, we need to differentiate the position function, s(t), with respect to time, t.
(a)The instantaneous velocity of the particle at any time t is given by v(t) = -3t^2 + 14t - 14. Instantaneous velocity (v):
To find the instantaneous velocity, we differentiate the position function, s(t), with respect to time:
v(t) = s'(t)
Differentiating the function s(t):
s(t) = -t^3 + 7t^2 - 14t + 8
Differentiating each term with respect to t:
s'(t) = -3t^2 + 14t - 14
(b) The acceleration of the particle at any time t is given by a(t) = -6t + 14.
Acceleration (a):
To find the acceleration, we differentiate the velocity function, v(t), with respect to time:
a(t) = v'(t)
Differentiating the function v(t):
v(t) = -3t^2 + 14t - 14
Differentiating each term with respect to t:
v'(t) = -6t + 14
To know more about instantaneous velocity refer here
https://brainly.com/question/30782692#
#SPJ11
A solenoid is made of n = 6500 turns, has length l = 35 cm, and radius r = 1.7 cm. the magnetic field at the center of the solenoid is measured to be b = 1.8 x 10^-1 t. Find the numerical value of the current in milliamps.
The numerical value of the current in the solenoid is approximately 1.21 milliamps.
To find the current in the solenoid, we can use Ampere's law. The formula for the magnetic field B at the center of a solenoid is:
B = μ₀ * n * I / l
where B is the magnetic field, μ₀ is the permeability of free space (4π x 10⁻⁷ T·m/A), n is the number of turns, I is the current, and l is the length of the solenoid.
We are given B = 1.8 x 10⁻¹ T, n = 6500 turns, and l = 35 cm = 0.35 m. We need to find the current I.
1.8 x 10⁻¹ T = (4π x 10⁻⁷ T·m/A) * (6500 turns) * I / 0.35 m
To solve for I, rearrange the equation:
I = (1.8 x 10⁻¹ T * 0.35 m) / ((4π x 10⁻⁷ T·m/A) * 6500 turns)
Now, calculate the current:
I ≈ 0.00121 A
To convert the current to milliamps, multiply by 1000:
I ≈ 1.21 mA
Therefore, the numerical value of the current in the solenoid is approximately 1.21 milliamps.
To learn more about current, refer below:
https://brainly.com/question/13076734
#SPJ11
10 onts The largest species of hummingbird is Patagonia Gigas, or the Giant Hummingbird of the Andes. This bird has a length of 21 cm and can fly with a speed of up to 50.0 km/h Suppose one of these hummingbirds flies at this top speed. If the magnitude of it's momentum.is 0.278 ems, what is the hummingbird Answer in units of ks
To find the mass of the hummingbird, we can use its length as an estimate. According to studies, a hummingbird's weight is approximately 0.1% of its length. So, the mass of the Giant Hummingbird is approximately:Therefore, the answer is 0.01324 ks.
First, let's break down the information we have been given. The Patagonia Gigas, or Giant Hummingbird, is the largest species of hummingbird with a length of 21 cm. It is also capable of flying at a top speed of 50.0 km/h, which is quite impressive given its small size.
Now, we are given the magnitude of its momentum, which is 0.278 ems. To find the hummingbird's momentum in units of kilogram meters per second (ks), we need to use the formula:p = mv
Where p is momentum, m is mass, and v is velocity. Since we are given the magnitude of momentum, we can assume that the velocity is in a straight line and we can ignore its direction.
m = 0.001 x 21 cm = 0.021 kg
Now, we can plug in the values we have:
0.278 ems = 0.021 kg x v
Solving for v, we get:
v = 13.24 m/s
Converting this to units of ks, we get:
v = 0.01324 ks
to know more about magnitude of momentum visit
brainly.com/question/14459931
#SPJ11
Tom 75 kg stands in a 25kg canoe that is still in the water. If he jumps east out of the canoe with a speed
of 5. 0 m/s, what would the recoil speed of the canoe be?
PLEASE HELP
Tom 75 kg stands in a 25kg canoe that is still in the water. If he jumps east out of the canoe with a speed of 5. 0 m/s, the recoil speed of the canoe would be 15.0 m/s in the opposite direction (west) when Tom jumps east out of the canoe with a speed of 5.0 m/s. The negative sign indicates the opposite direction of motion.
To determine the recoil speed of the canoe when Tom jumps out, we can apply the principle of conservation of momentum. According to this principle, the total momentum before the jump is equal to the total momentum after the jump.
Initially, both Tom and the canoe are at rest, so the total momentum is zero. After the jump, Tom moves in one direction, and the canoe moves in the opposite direction to conserve momentum.
The momentum of an object is defined as the product of its mass and velocity. The momentum before the jump is given by:
Initial momentum = (mass of Tom + mass of canoe) * 0
The momentum after the jump is given by:
Final momentum = mass of Tom * velocity of Tom + mass of canoe * velocity of canoe
Using the conservation of momentum, we can equate the initial and final momenta:
0 = (mass of Tom + mass of canoe) * 0
0 = mass of Tom * velocity of Tom + mass of canoe * velocity of canoe
Substituting the given values:
0 = 75 kg * 5.0 m/s + 25 kg * velocity of canoe
Solving for the velocity of the canoe:
-75 kg * 5.0 m/s = 25 kg * velocity of canoe
Velocity of canoe = (-75 kg * 5.0 m/s) / 25 kg
Velocity of canoe = -15.0 m/s
Therefore, the recoil speed of the canoe would be 15.0 m/s in the opposite direction (west) when Tom jumps east out of the canoe with a speed of 5.0 m/s. The negative sign indicates the opposite direction of motion.
Learn more about recoil speed here:
https://brainly.com/question/26714844
#SPJ11
A 0.160H inductor is connected in series with a 91.0? resistor and an ac source. The voltage across the inductor is vL=?(11.5V)sin[(485rad/s)t].
A.)Derive an expression for the voltage vR across the resistor.
Express your answer in terms of the variables L, R, VL (amplitude of the voltage across the inductor), ?, and t
B.) What is vR at 1.88ms ?
Express your answer with the appropriate units.
To derive the expression for the voltage vR across the resistor, we can use Ohm's law and the fact that the voltage across the inductor and resistor in a series circuit must add up to the total voltage of the source. Therefore, vR at 1.88 ms is approximately 8.736 V.
The voltage across the resistor is given by Ohm's law:
vR = IR,
where I is the current flowing through the circuit.
The current can be calculated by dividing the voltage across the inductor by the total impedance of the circuit:
I = VL / Z,
where VL is the amplitude of the voltage across the inductor.
The impedance Z of the circuit is the total opposition to the flow of current and is given by the square root of the sum of the squares of the resistance (R) and reactance (XL):
Z = √(R² + XL²).
In this case, the reactance of the inductor is given by XL = ωL, where ω is the angular frequency in radians per second and L is the inductance.
Substituting these equations, we can find an expression for the voltage vR across the resistor:
vR = IR = (VL / Z) × R = (VL / √(R² + XL²)) × R.
B) To find vR at 1.88 ms, we substitute the given values into the expression derived in part A.
Substituting these values into the expression for vR:
vR = (VL / √(R² + XL²)) * R.
First, we calculate the reactance of the inductor:
XL = ωL = (485 rad/s) × (0.160 H) = 77.6 Ω.
Then we substitute the values:
vR = (11.5 V / √(91.0² + 77.6²)) × 91.0 Ω.
Now we can calculate vR:
vR = (11.5 V / √(8281 + 6022.76)) × 91.0 Ω
= (11.5 V / √14303.76) × 91.0 Ω
= (11.5 V / 119.697) × 91.0 Ω
= 0.096 V × 91.0 Ω
= 8.736 V.
Therefore, vR at 1.88 ms is approximately 8.736 V.
To know more about ohm's law
https://brainly.com/question/1247379
#SPJ4
An LRC series circuit with R= 150 ohms, L= 25 mH and C= 2 mF is powered by an AC voltage source of peak voltage Vo= 340 V and frequency f= 660 Hz.
Â
(a) Determine the peak current that flows in this circuit.
(b) Determine the phase angle of the source voltage relative to the current.
(c) Determine the peak voltage across R and its phase angle relative to the source voltage.
(d) Determine the peak voltage across L and its phase angle relative to the source voltage.
(e) Determine the peak voltage across C and its phase angle relative to the source voltage
a. The peak current using the characteristic equation: I = (Vo*t) / (2*R*C)
b. The phase angle of the source voltage is angle = arctan(Vo/I).
c. Peak voltage: Vr = Vp * cos(angle)
d. Peak voltage across L: Vl = Vp * cos(angle)
e. Peak voltage across C: Vc = Vp * cos(angle)
To solve this problem, we need to use the characteristic equation of an LRC circuit, which is given by:
1 + (2*RC) / (R + jXL) + (2*LC) / (C + jXC) = 0
First, we need to find the values of XL and XC using the impedance ratio formula:
Z = (R + j*XL) / (2*RC) = (2*LC) / (C + j*XC)
Solving for XL and XC, we get:
XL = (RZ - 1)/(2C)
XC = (CZ - 1)/(2R)
Next, we can solve for the peak current using the characteristic equation:
I = (2*RC) / (2RC + 2L*C)
Solving for I, we get:
I = (Vo*t) / (2*R*C)
where t is the time for half a cycle of the source voltage.
The phase angle of the source voltage relative to the current can be found using the following formula:
angle = arctan(Vo/I)
where Vo is the peak voltage of the source voltage and I is the peak current in the circuit.
The peak voltage across R and its phase angle relative to the source voltage can be found using the following formula:
Vr = Vp * cos(angle)
where Vp is the peak voltage across R and angle is the angle we found earlier.
The peak voltage across L and its phase angle relative to the source voltage can be found using the following formula:
Vl = Vp * cos(angle)
where Vp is the peak voltage across L and angle is the angle we found earlier.
The peak voltage across C and its phase angle relative to the source voltage can be found using the following formula:
Vc = Vp * cos(angle)
Learn more about peak current visit: brainly.com/question/27839310
#SPJ4