Why Is The Electric Field Inside A Conductor Zero

The answer to this equation is not possible to calculate without knowing the value of x and y.

An equation is a mathematical statement that expresses the equality of two expressions. Equations are used to find unknown values, such as the number of solutions to a problem, and to describe the relationship between two or more variables. An equation is composed of two expressions connected by an equal sign (=). The two expressions must be the same, meaning that whatever value is on one side of the equation must be the same value on the other side. Equations can be used to describe a wide variety of real-world situations, such as the speed of a car, the cost of a house, or the force of a magnet.

This equation contains two variables, x and y. In order to calculate the answer, we would need to know the value of each variable.

To learn more about equation
https://brainly.com/question/25951773
#SPJ1

The percent of minerals recycled in the United States in the most recent year (2018) was 2.3%. This number appears to be staying about the same over the past few years, with a slight increase from 2.2% in 2017 to 2.3% in 2018.

Recycling is the process of taking used, unwanted or discarded materials and transforming them into new products. It helps to reduce waste and conserve natural resources. Recycling can include the reuse of materials such as glass, paper, plastic, steel, aluminum, and other metals. By recycling, we can reduce the amount of waste that goes into landfills and help protect our environment.

To know more about Recycle
https://brainly.com/question/376227
#SPJ1

The correct answer is a. An astronaut who falls into a black hole would be stretched because the gravity near a black hole is incredibly strong. This is due to the enormous mass of the black hole, which creates a gravitational force so powerful that it warps the fabric of space and time.

As the astronaut approaches the event horizon, the difference in gravitational force between their head and feet becomes so great that it stretches their body apart, a process known as "spaghettification." This occurs because gravity is much stronger at the black hole's event horizon than it is further away from the black hole.

The gravitational force changes dramatically over a short distance, causing the astronaut's body to stretch like spaghetti. While time does indeed slow down near the event horizon of a black hole, it is not the reason why the astronaut would be stretched.

To learn more about gravitational force, visit here

https://brainly.com/question/12528243

#SPJ4

A millimeter (mm) is made up of 1,000 micrometers (µm). That is, one millimeter equals 1,000 micrometers or [tex]10^{-3}[/tex] meters.

Micrometers are typically used to measure very tiny distances, notably in microscopy, whereas millimeters are commonly used to measure greater distances, such as an object's length or breadth.

It is crucial to note that the micrometer is also known as a micron, therefore the conversion may be represented as 1,000 microns in a millimeter at times. Regardless matter whether you use micrometers or microns, the conversion is the same: a millimeter has 1,000 of them.

Learn more about Micrometers and Millimeters at

https://brainly.com/question/15168348

#SPJ4

The EROI system of evaluating energy exploitation from various sources is based upon the ratio of energy output to energy input in the extraction process

The EROI system evaluates the efficiency of energy exploitation by comparing the amount of energy obtained from a given source to the amount of energy required to extract it. In mathematical terms, the EROI ratio can be expressed as follows:

EROI = Energy output / Energy input

The energy output refers to the amount of energy obtained from a particular source, such as oil or wind.

The higher the EROI ratio, the more efficient the energy source is, as it means that more energy is being produced for every unit of energy input.

In conclusion, the Energy Return on Investment (EROI) system provides a useful tool for evaluating the efficiency of different energy sources by comparing the amount of energy obtained to the amount of energy required to extract it.

To know more about energy here

https://brainly.com/question/1932868

#SPJ4

The correct answer is option 4: A1, B2, C2

A1: The force of friction acting on the ladder is given by:

f_friction = µ * N

where µ is the coefficient of static friction and N is the normal force acting on the ladder, which is equal to the gravitational force acting on the ladder.

B2: The gravitational force acting on the ladder can be expressed as:

f_gravity = m * g

where m is the mass of the ladder and g is the acceleration due to gravity.

C2: The component of the gravitational force acting parallel to the wall can be expressed as:

f_parallel = f_gravity * sin(θ)

where θ is the angle between the ladder and the wall.

The ladder will remain stationary as long as the force of friction acting on it is equal to or greater than the component of the gravitational force acting parallel to the wall. Setting these two forces equal to each other, we get:

f_friction = f_parallel

µ * N = m * g * sin(θ)

The smallest angle θ for which the ladder remains stationary is given by:

sin(θ) = µ * N / (m * g)

θ = sin^-1 (µ * N / (m * g))

Note that the value of µ * N / (m * g) must be less than or equal to 1 for the ladder to remain stationary.

To know more about force of friction , visit:

https://brainly.com/question/24386803

#SPJ4

Answer:

the glass and paper have diffrent charges

Explanation:

if the glass is charged positively then the paper was charged negatively

the to charges were to attract think of it as a magnet

True, A frequency distribution usually has equal bin widths.

What is frequency distribution?

In frequency tables or charts, frequency distributions are displayed. The exact number of observations that fall into each range may be seen in frequency distributions, as well as the proportion of observations that do. The distribution in the latter case is known as a relative frequency distribution.

What is frequency distribution formula?

The formula for the square root of the frequency distribution is expressed as: C = n, where n is the total number of observations of the data that has been distributed. C (number of classes) = 1 + 3.3 logn, where (log is base 10)

Hence True is a correct answer.

To know more about frequency distribution follow link

https://brainly.com/question/28406412

#SPJ4

This equation assumes that the eyeball is a simple harmonic oscillator and that the musculature acts as a linear spring. The frequency of the vibration (f) is equal to the natural frequency of the eyeball's oscillation and the mass (m) is the mass of the eyeball.

The frequency is the rate or number of occurrences of a particular event or phenomenon with respect to its occurrence within a given period of time. It is typically measured in cycles per second (hertz), or the number of times an event occurs in a given period of time. Frequency can also refer to the rate at which something is repeated, such as the number of times a sound is repeated in a given span of time. Frequency can also refer to the number of times a certain action is performed, such as the number of times a person visits a store in a given month.

The effective spring constant of the musculature attached to the eyeball is equal to the frequency squared (f^2) multiplied by the mass (m) divided by 4pi^2:

k = f^2 m / 4pi^2

k = (29 Hz)^2 (7.5 g) / (4(3.14)^2)

k = 0.395 N/m (2 sig figs)

To learn more about frequency

https://brainly.com/question/30466268

#SPJ4

Equation [tex]\\k = 0.395 N/m (2 sig figs)[/tex] assumes that the eyeball is a simple harmonic oscillator and that the musculature acts as a linear spring.

The frequency of the vibration (f) is equal to the natural frequency of the eyeball's oscillation and the mass (m) is the mass of the eyeball.

The frequency is the rate or number of occurrences of a particular event or phenomenon with respect to its occurrence within a given period of time. It is typically measured in cycles per second (hertz), or the number of times an event occurs in a given period of time. Frequency can also refer to the rate at which something is repeated, such as the number of times a sound is repeated in a given span of time. Frequency can also refer to the number of times a certain action is performed, such as the number of times a person visits a store in a given month.

The effective spring constant of the musculature attached to the eyeball is equal to the frequency squared (f^2) multiplied by the mass (m) divided by 4pi^2:

[tex]k = f^2 m / 4\pi^2\\k = (29 Hz)^2 (7.5 g) / (4(3.14)^2)\\k = 0.395 N/m (2 sig figs)[/tex]

To learn more about frequency

brainly.com/question/30466268

#SPJ4

The time period is 0.3 s and frequency is 3 Hz

Step 1 :

Given:

No. of cycles N = 24

Total time take t = 8 s

Step 1 : Calculating the frequency:

The frequency of a wave or oscillation is defined as the number of cycles or completed alternations per unit time.

f = N/t

f = 24/8

f = 3 Hz

Step 2: Calculating the time period:

Frequency and time period are inversely proportional.

The amount of time it takes for something to complete one oscillation is called its time period.

Time period = 1/Frequency

Time period = 1/3 = 0.3 s

So, the time period is 0.3 s and frequency is 3 Hz.

Learn more about Frequency here:

https://brainly.com/question/254161

#SPJ1

When venous blood enters the left atrium during ventricular Diastole and the left atrial pressure exceeds the left ventricular pressure, the mitral valve opens and passive filling of the ventricle occurs. That's true.

Diastole begins with the closure of the aortic (or pulmonary) valve and ends with the closure of the mitral (or tricuspid) valve. This period includes relaxation and filling of the ventricles. Diastole is when the blood vessels return blood to the heart in preparation for the next ventricular contraction. The cardiac cycle begins with relaxation of the atria and ventricles. During diastole, blood flowing from the central veins fills the atria, partially fills the ventricles, and flows through the venous sinuses, the sinoatrial (SA) duct, and the atrioventricular (AV) duct. 

Learn more about Diastole

brainly.com/question/902007

#SPJ4

True. The ventricles of the heart are the two lower chambers responsible for pumping blood to the body and lungs.

During ventricular diastole, the ventricles relax and begin to fill with blood. Most of the filling happens passively while the atrioventricular valves (the mitral valve on the left side and the tricuspid valve on the right side) remain open, allowing blood to flow from the atria into the ventricles. This phase of the cardiac cycle is important for the efficient filling of the ventricles, which helps to ensure an adequate volume of blood is available to be pumped out during the subsequent contraction (systole).

Learn more about ventricle here: brainly.com/question/29564818

#SPJ4

Answer:

d. the orthogonal force.

Explanation:

The other three forces, the tension force, the normal force, and the thrust force, are commonly discussed in introductory physics courses.

The acceleration is 1.4 m/s^2

Acceleration is the rate at which an object's velocity changes over time. In other words, it is the change in velocity per unit time.

We call this;

a = v - u/t

a = 28 - 0/20

a = 1.4 m/s^2

Acceleration can be positive, negative or zero. A positive acceleration means the velocity of an object is increasing, a negative acceleration means the velocity of an object is decreasing and zero acceleration means the velocity of an object is constant (not changing). The unit of acceleration is meters per second squared (m/s^2).

Learn more about acceleration:https://brainly.com/question/12550364

#SPJ1

Magnetic field lines are closest together in areas where the magnetic field is strongest. Magnetic field lines represent the direction of the magnetic force and the closer the lines are together, the stronger the magnetic field.

What are magnetic field lines?

In a magnetic field, the direction of the magnetic force experienced by a moving charged particle is perpendicular to both the direction of motion of the particle and the direction of the magnetic field. The magnetic field lines provide a visual representation of the direction of the magnetic force at any given point in space, and the closer the lines are together, the stronger the magnetic field and the greater the force experienced by a moving charged particle.

It is important to note that magnetic field lines never intersect, as the magnetic force at a given point in space has a unique direction. The number of magnetic field lines passing through a given area is proportional to the strength of the magnetic field in that area.

To know more about magnetic field ,visit:

brainly.com/question/14411049

#SPJ4

The average angular acceleration of the ferris wheel is 0.32 rad/s2.

Acceleration is the rate it which an object increases its speed velocity or rate of change it is the rate of change of velocity of a time or the rate of change of the position of an object acceleration can be either positive when the speed of an objective increasing or negative in the speed of the object is decreasing.

The average angular acceleration of the ferris wheel can be calculated using the equation:

α = Δω / Δθ

where α is the angular acceleration, Δω is the change in angular speed, and Δθ is the change in angular displacement.

Therefore, the angular acceleration of the ferris wheel is:

α = (0.80 rad/s - 0)/(2.5 rad)

α = 0.32 rad/s2

Therefore, the average angular acceleration of the ferris wheel is 0.32 rad/s2.

To know more about acceleration click-
https://brainly.com/question/605631
#SPJ4

The number of mutations that will occur in the S.aureus population in foot wounds is 0.0336.

The natural habitat of S. aureus in humans is in the area of ​​the skin, nose, mouth, and large intestine, where under normal immune system conditions, S. aureus is not pathogenic (normal human microflora).

Bacterial genes can mutate quickly. These mutations can make bacteria reproduce faster, become stronger, and kill. The mutation can also be accelerated by the excessive use of antibiotics. As a result, bacteria also become more resistant to antibiotics.

Generations are produced in 12 hours:

12*60/30 = 24 generations.

Mutations in 1 generation are 0.0028.

Then the mutation after 12 hours is 12* 0.0028 = 0.0336

Your question is incomplete but most probably your full question was:

Staphylococcus aureus is a bacterium that can cause infections in broken skin. A single S. aureus cell gets into a wound on someone's foot. An S. aureus cell divides by binary fission approximately every 30 minutes. S. aureus has 2.8 x 106 base pairs in its genome. Mutations occur at a rate of 1 per 1010 base pairs per generation. Therefore, approximately 0.0028 mutations will occur per cell in the population. At the end of 12 hours, how many mutations will be present in the population of S. aureus in the wound on the foot?

Learn more about mutations on bacteria at https://brainly.com/question/3155547

#SPJ4

Answer: A gravitational pull is keeping the ball in place and not letting it go flying into the air. so simple answer is gravity

Answer:

Uniform Circular Motion:

When a car goes around a circular curve, the velocity of the car definitely changes because of the change in the direction of the car. However, the speed of the car does not necessarily change and circular motion can be sustained by a constant speed. Explanation: i don't know dawg :)

The slopes that are formed by angular, ragged stones are more stable because they have the largest angle of repose.

1. In physics, the angle formed by the plane de contact between both bodies and the horizontal so when upper body is just about to slide: the angle whose tangent represents the frictional resistance of the two bodies.

One aspect of inter particulate friction, or the resistance to particle movement, is angle of repose. The USP describes it as the consistent, three-dimensional angle (relative to the horizontal base) acquired by a cone-shaped pile of material created using any of a number of different techniques.

To know more about angle of repose visit:

https://brainly.com/question/23683999

#SPJ4

Answer:

5.3 x 10^13 N.

Explanation:

The force of gravity between two objects can be calculated using the equation:

F = G * (m1 * m2) / d^2

where F is the force of gravity, G is the gravitational constant (6.67 x 10^-11 N m^2/kg^2), m1 and m2 are the masses of the two objects, and d is the distance between their centers.

To calculate the average force of gravity between Pluto and the Sun, we need to know their masses and the average distance between them.

Pluto has a mass of approximately 1.309 x 10^22 kg, and the average distance between Pluto and the Sun is about 5.9 x 10^9 m.

Plugging these values into the equation, we get:

F = 6.67 x 10^-11 N m^2/kg^2 * (1.309 x 10^22 kg * 1.989 x 10^30 kg) / (5.9 x 10^9 m)^2

F = 5.3 x 10^13 N

So the average force of gravity between Pluto and the Sun is approximately 5.3 x 10^13 N.

Answer:

Below

Explanation:

Hz is   cycles per second....each cycle is 2 pi

  so multiply Hz * 2 pi to get R/s

example

12 Hz          12 * 2pi = 24 pi  rad/s  = 75.4 Rad/s

The sled's runners experience kinetic frictional force from the snow, which causes the sled to slow down and eventually stop. The amount of kinetic friction is 0.050.

Writing - When writing, the pen's tip comes into touch with the paper, causing rolling friction for ballpoint pens or sliding friction for pencils. During skating.

The force that opposes motion when the surfaces of two objects come into contact is known as friction. Friction lessens a machine's mechanical advantage, or, to put it another way, reduces the output to input ratio.

To know more about Friction visit:

https://brainly.com/question/13000653

#SPJ4

A constant force is exerted on a cart (initially at rest) on an air track. Neglect friction. The force acts for a short time and gives the cart a certain final speed. To reach the same final speed with a force that is only half as big, the force must be exerted on the cart for a time interval twice as long as the time interval for the stronger force.

Assuming that the force acts in the same direction as the motion of the cart, we can use the impulse-momentum theorem to relate the force, the time interval it acts for, and the resulting change in momentum of the cart.

To Know more about momentum, here

https://brainly.com/question/20301772

#SPJ4

The new pressure is 4 atm.

Pressure is the amount of force applied over a given area it is typically measured in unit of Pascal's PA or pounds per square in each PSI pressure can be caused by a variety of factors including the weight of the atmosphere the weight of liquid and the weight of objects is that is important in many physical phenomena including the flow of liquids the transfer of energy and the propagation of sound in general when pressure is increase the volume of the material decrease.

The ideal gas law states that the pressure of an ideal gas is directly proportional to its temperature and inversely proportional to its volume. Thus, when the temperature is doubled and the volume is halved, the pressure is quadruple. Therefore, the new pressure is 4 atm.

To know more about pressure click-
https://brainly.com/question/28012687
#SPJ4

The speed of light in the solid is 1.88 × 10⁸m/s

What are the light's wavelength and frequency?

The distance between equivalent places in two consecutive light cycles is known as the wavelength of light, and the frequency of light is the number of light cycles that pass a specific spot in a second.

The ratio of the speed of light in a vacuum to that in a second medium with a higher density is used to compute the refractive index (also known as the index of refraction). If the solid's wavelength is 420/670, or 0.627 times that of air, then the solid's light speed is also 0.627 times that of air. Bonus: The reciprocal of speed is proportional to refractive index. Given that the refractive index of air is 1, the clear solid's refractive index is 670/420, or 1.60.

The refractive index of a material is,

[tex]n = \dfrac{\lambda_v}{\lambda_m}[/tex]

[tex]n = \dfrac{670 }{420 }[/tex]

n = 1.59

Now,

The speed of light in the solid is,

[tex]\mathrm{v = \dfrac{c}{n} }[/tex]

Here, c is speed of light = 3 × 10⁸ m/s

So,

[tex]\mathrm{v = \dfrac{3 \times 10^8}{1.59} }[/tex]

v = 1.88 × 10⁸ m/s

Thus, The speed of light in the solid is 1.88 × 10⁸m/s

To learn more about refractive index use link below:

https://brainly.com/question/14760207

#SPJ4

Complete question:

A light wave has a 670 nm wavelength in air. Its wavelength in a transparent solid is 420nm.

What is the speed of light in this solid?

Over time, the molecules will undergo various processes, such as diffusion, collision, and chemical reactions. These processes can cause the molecules to change their physical and chemical properties, as well as their spatial arrangement.

For example, diffusion can cause molecules to spread out and move from areas of high concentration to areas of low concentration. Collision can cause molecules to bounce off each other and change their direction of movement. Chemical reactions can cause molecules to form new substances with different properties.

Overall, the behavior of molecules over time is determined by the laws of physics and chemistry, and can be observed and studied using various experimental techniques.

To learn more about molecules refer here:

https://brainly.com/question/19922822#

#SPJ11

A 25-foot ladder is set against the side of a house so that it reaches up to 15 feet. If Damian grabs the ladder at its base and pulls it 3 feet farther from the house, the distance from the side of the house to which the ladder reaches now is 9.8m.

The total length of the ladder is 25m. The distance the ladder is set up against the side of the house is 15m.

According to the image, apply Pythagoras' theorem, we get,

(25)² = (15)²+(a)²

a²=(25)²-(15)²

a²=625-225 =400

a=[tex]\sqrt{400}[/tex]

a= 20m.

Now, if Damian grabs the ladder at its base and pulls it 3 feet farther from the house, so the total base is (20+3) = 23m.

Applying Pythagoras' theorem again, we get

(25)² = (23)²+(a)²

a²=(25)²-(23)²

a²=625-529 =96

a=[tex]\sqrt{96}[/tex]

a= 9.8m.

The length to which the ladder reaches now is 9.8m.

For further learning about Pythagoras' theorem, refer to the link: https://brainly.com/question/21926466

#SPJ4

Based on the provided chemical and physical properties, the unknown substance would be most useful as a fuel.

The substance is an easily combustible organic compound that is in liquid form at room temperature, and it contains a lot of volatile, high-energy bonds.

These properties make it an ideal fuel for a range of applications. The high energy content of the bonds means that the fuel can be used to power engines and generate heat, while the liquid form makes it easily transportable.

The combustible nature of the substance also makes it a suitable fuel for cooking and other activities that require a flame. The fact that it is in liquid form at room temperature also makes it easier to store and use.

The unknown substance is a versatile fuel that can be used for a variety of applications.

To know more about fuel,

https://brainly.com/question/10172005

#SPJ4

Answer:

a

Explanation:

the chemical change in the physical change

Fireworks effects are made by combining various chemical compounds and powders in specific configurations to produce a wide range of colors, shapes, and patterns.

The specific ingredients and configurations used can vary depending on the desired effect, but some common techniques and ingredients used in making fireworks include:

   Color production: Different metal salts are used to produce specific colors when they burn. For example, strontium produces red, copper produces blue, and barium produces green.

   Sparkling effects: Aluminum or magnesium powder can be added to create sparkling or glittering effects.

   Whistling or popping effects: Salts such as potassium benzoate or potassium oxalate can be used to create whistling or popping sounds.

   Smoke effects: Chemicals such as titanium dioxide or zinc oxide can be used to produce smoke or haze effects.

   Shaped charges: Fireworks can be shaped in various configurations to produce specific shapes or patterns, such as stars, flowers, or hearts.

To create a specific effect, the different chemicals and powders are carefully combined and packed into the firework's shell. The shell is then ignited, which ignites the chemicals inside and produces the desired effect.

Fireworks displays often involve a combination of different effects and colors, which are choreographed to music or other audio cues. The result is a dazzling and dynamic visual spectacle that is enjoyed by millions of people around the world for various celebrations and events.

For such more questions on Chemical Compounds

https://brainly.com/question/1194814

#SPJ4

At a top speed of roughly 16.4 m/s, the automobile can navigate the bend without slipping.

The corner speed is the product of the stall speed times the square root of the limiting maximum G loading of the airplane in a certain configuration. Simple. You may find the fuel weight range based on the range of stall speeds using the equation, among other things.

The centripetal force determines the fastest speed at which an automobile can round a curve without sliding,

F_c = m × a_c

The centripetal acceleration is given by:

a_c = v² / r

where v is the velocity of the car and r is the radius of the curve.

F_friction = friction coefficient * F_norm

F_friction = F_c

friction coefficient × F_norm = m × v² / r

v² = r × friction coefficient × g

v = sqrt(r × friction coefficient × g)

v = sqrt(25 m  0.7 × 9.81 m/s²) ≈ 16.4 m/s.

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ1