The MAC address is also referred to as the physical address because it uniquely identifies the hardware interface of a network device. It is called the physical address because it is assigned to the network interface card (NIC) during manufacturing and is physically embedded in the card's hardware.
The MAC address (Media Access Control address) is a unique identifier assigned to the network interface of a device. It consists of a series of numbers and letters and is typically represented in a hexadecimal format. The MAC address is assigned by the manufacturer and is hard-coded into the network interface card (NIC) hardware.
The term "physical address" is used because the MAC address is tied directly to the physical characteristics of the network interface card. It is physically embedded in the NIC hardware and cannot be changed. Unlike IP addresses, which can be dynamically assigned or changed, the MAC address remains constant throughout the lifetime of the network device. The physical address serves as a permanent and unique identifier for the device on the network, enabling communication and data exchange between devices at the physical layer of the network.
In summary, the MAC address is referred to as the physical address because it is a fixed identifier associated with the physical hardware of a network device, distinguishing it from other devices on the network.
You can learn more about MAC address at
https://brainly.com/question/13267309
#SPJ11
_______________ is a technology system requiring the driver to maintain constant control of the vehicle.
The technology system requiring the driver to maintain constant control of the vehicle are:
Forward collision avoidance Automatic emergency braking Lane keeping assist What is technology?Technology can be regarded as the application of science to bring improvement to mankind at large.
It should be noted that The technology system requiring the driver to maintain constant control of the vehicle includes Forward collision avoidance as well as Automatic emergency braking and Lane keeping assist .
Learn more about technology on:
https://brainly.com/question/25110079
#SPJ1
If a user has a low level of digital literacy, what might they have trouble interpreting?
If a user has a low level of digital literacy, they might have trouble interpreting:
Calls to action IconsDesign patternsWhat is digital literacy?Digital literacy can be regarded as the an individual's ability in finding the evaluation, and communication of information through typing and other media on various digital platforms.
It can be evaluated with individual's grammar as well as the composition and typing skills and ability to produce text, with technology.
It should be noted that If a user has a low level of digital literacy, they might have trouble interpreting Calls to action and Icons and Design patterns.
Learn more aboutdigital literacy at:
https://brainly.com/question/14242512
#SPJ1
COMPLETE QUESTION:
If a user has a low level of digital literacy, what might they have trouble interpreting? Select all that apply.
a. Calls to action
b. Words
c. Icons
d. Design patterns
One difference between a switch and a router is that a router will only process messages addressed to the router (at layer 2), while a switch processes all messages.
Answer: True
Explanation:
Create a round object to hang in your window that will touch the midpoints of all four edges of your window
The round object that can touch the midpoints of all four edges of a window is illustrated by a circle with dimensions.(x-h)² + (y-k)² = r².
What is a midpoint?It should be noted that a midpoint is a point that is lying between two points and is in the middle of the line joining the two points.
Based on the information given, the center is (h,k) and tthe radius = r.
Top of the circle = (h,r+k) = midpoint of the window's top
The circle's bottom = (h,k-r)=midpoint of the window bottom
The left edge of the circle = (h-r, k)=midpoint of the window's left side
The right edge of the circle = (h+r, k)= midpoint of the window's right side
The window square is illustrated as 2r by 2r and its vertices are (h-r, r+k), (h+r, r+k), (h-r, r-k), (h+r, r-k).
Learn more about midpoint on:
https://brainly.com/question/5566419
#SPJ1
Which is NOT a common pattern or architecting principle related to scalable computing? Publisher Subscriber Decoupling Disaster Recovery Producer Consumer
The option that is not a common pattern or architecting principle related to computing is Disaster Recovery.
What is Disaster recovery?This is known to be a form of organizational process that is often used so as to get back access and functionality in regards to natural disaster, and others.
Note that the option that is not a common pattern or architecting principle related to scalable computing is Disaster Recovery.
Learn more about architecting principle from
https://brainly.com/question/9474550
#SPJ1
In the formula =VLOOKUP(“shovel”, B2:D12, 3, FALSE), which part is the lookup value parameter?
A.
shovel
B.
FALSE
C.
B2:D12
D.
3
In the formula =VLOOKUP(“shovel”, B2:D12, 3, FALSE), the part that is the lookup value parameter is B2:D12.
What are the parameters in VLOOKUP?The VLOOKUP is known to often have four arguments:
lookup_value, table_array, column_index_num, range_lookupThis value is known to be a LOOKUP searches which is in an array. The lookup_value argument is one that be seen to be a number, text, a logical value.
Note that If LOOKUP is one that did not see or find the value of lookup_value, it is said to often uses the largest value in the array that is known to be smaller than or one that is equal to lookup_value.
Hence, In the formula =VLOOKUP(“shovel”, B2:D12, 3, FALSE), the part that is the lookup value parameter is B2:D12.
Learn more about value parameter from
https://brainly.com/question/24076677
#SPJ1
According to repko and szostak, what is the term that describes the disagreement among a discipline's practitioner's over the defining elements of the discipline?
According to repko and szostak, the term that describes the disagreement among a discipline's practitioner's over the defining elements of the discipline is option D- Cognitive Discord.
What is the relationship between interdisciplinarity and the disciplines?Based on the words of Quoting Jantsch, “Interdisciplinarity is known to be a well used axiomatics for a set of disciplines is seen at a higher level and this concept is one that can be used to co-ordinate or handle the disciplines.”
Note that Mono or multi - interdisciplinarity is one that is aim at role or duties concerning one or a lot of concrete cases.
Hence, According to repko and szostak, the term that describes the disagreement among a discipline's practitioner's over the defining elements of the discipline is option D- Cognitive Discord.
Learn more about disagreement from
https://brainly.com/question/955691
#SPJ1
See options below
A- Metanarrative
B- Perspective taking
C- Epistemic norms of a discipline
D- Cognitive Discord
Question 3 Fill in the blank: Curiosity, understanding context, having a technical mindset, data design, and data strategy are _____. They enable data analysts to solve problems using facts.
Curiosity, understanding context, having a technical mindset, data design, and data strategy are data driven.
What are data driven skills?Data-driven decision-making is known to be one that entails the five analytical skills which are:
curiosity, understanding context, having a technical mindset, data design, data strategy.Hence, Curiosity, understanding context, having a technical mindset, data design, and data strategy are data driven.
Learn more about Curiosity from
https://brainly.com/question/4975503
#SPJ1
In fedora 20, the logging system used to record the messages normally stored within the boot.log, messages, and syslog files has been replaced by a journaling database system called?
The logging system which has replaced the journaling database system for use in recording messages that are normally stored within the boot.log is Journald.
What is Journald?Journald refers to a logging system service which allows for messages to be stored and does so in an easier way so that system administrators can find relevant and interesting information when they look through log messages.
In the past, these messages that Journald now stores would have been stored in boot.log, messages, and syslog files but thanks to Journald using the special file format which is made especially for log messages, this has changed.
Find out more on log messages at https://brainly.com/question/4595770?referrer=searchResults
#SPJ1
Identify the numbered parts and accessories of a desktop computer. Include an indefinite article with each response
The numbered parts of the desktop in the image are;
Monitorlogic boardProcessor ChipRAM ChipFloppy DiskPower UnitDVD DriveHard DriveKeyboardMouseA desktop computer is a piece of personal technology intended to sit on top of an ordinary office desk.
It links to input devices like the monitor, keyboard, and mouse that users use to interact with a computer's actual hardware.
Learn more about desktop computers:
https://brainly.com/question/26671214
#SPJ1
Developers found a "time of check to time of use" (TOCTTOU) vulnerability in their application. The vulnerability made it possible to change temporary data created within the app before the app uses the data later. This vulnerability is taking advantage of what process in the application?
This vulnerability above is taking advantage of the race condition process in the application.
What is race condition?This race condition is said to be in the critical section or one that is a part of the program and it is a place where shared memory is accessed and it is concurrently worked on or executed by two or more threads.
Hence, This vulnerability above is taking advantage of the race condition process in the application.
Learn more about race condition from
https://brainly.com/question/13445523
#SPJ2
Given a deque mydq is: 17 55 98, what remains in the deque after the function mydq.pop_back() has been called?
The factor that remains in the deque after the function mydq.pop_back() has been called 17 55.
What do you mean by deque?Deque or Double Ended Queue is known to be a kind or type of queue where there is an insertion and deletion of elements that can be carried from the front or the rear.
Note that the word deque, is known to be a short word for the term double-ended queue. A deque is said to be a list that aids the placing and removal at both ends.
Therefore, based on the above, The factor that remains in the deque after the function mydq.pop_back() has been called 17 55.
Learn more about deque from
https://brainly.com/question/16750037
#SPJ1
See full question below
32) Given a dequemyDgis: 17 55 98, what remains in the deque after the function myDQ.pop_back() has been called? a. 17 55 b. 17 C. 98 d. 55 98 33)
______________________ refers to the real-time connection between a mobile device and other computing environments.
Answer:
Mobile Compunting refers to real time .... .
I HOPE IT HELP YOU
A customer is trying to configure an 802.11b wireless card in an old laptop to connect to an 802.11g wireless router. When the customer scans for the wireless network's SSID (Dion-Corp), it is not displayed within Windows. What is the MOST likely reason that the SSID is not being displayed
In the case above, the most likely reason that the SSID is not being displayed is that The broadcast is disabled on the wireless router.
What is disable broadcast in Wi-Fi?The term broadcasts is known to be any medium that is often used by organization to share a program.
Note that the act of Disabling the SSID Broadcast is said to be one of the method of securing a wireless network.
Note also that this procedure will hinder other users from getting or detecting your SSID or one's wireless network name if they ever attempt to see the available wireless networks in one's area.
Therefore, In the case above, the most likely reason that the SSID is not being displayed is that The broadcast is disabled on the wireless router.
Learn more about wireless router from
https://brainly.com/question/9362673
#SPJ1
See full question below
A customer is trying to configure an 802.11b wireless card in an old laptop to connect to an 802.11g wireless router. When the customer scans for the wireless network's SSID (Dion-Corp), it is not displayed within Windows. What is the MOST likely reason that the SSID is not being displayed?
Options are :
802.11g and 802.11b use different frequencies
The wireless router is not configured for DHCP support
The broadcast is disabled on the wireless router
The wireless router is configured with WPA2 encryption
Joe has been issued a company-owned tablet. He finds that the performance decreases after a few hours of use. After he power-cycles the tablet, performance returns, but the tablet begins to slow again after an hour of use. Which of the following is the BEST action to troubleshoot the problem
The best action to troubleshoot the problem is Airplane mode has been set on the tablet.
What does airplane mode do?Airplane mode is known as “flight mode” as it is said to be a setting that can be seen on a smartphone that temporarily hinders signals and Wi-Fi.
Note that The best action to troubleshoot the problem is Airplane mode has been set on the tablet.
See options below
Which of the following is the MOST likely cause of this issue?
MAC filtering has been enabled on the branch office wireless access point.
Joe's tablet has been configured with full device encryption.
Airplane mode has been set on the tablet.
The connection between the branch office router and internet service provider is down.
Learn more about troubleshoot from
https://brainly.com/question/1382377
#SPJ1
The residual volume can be measured directly with: Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a digital spirometer b wet spirometer c both digital and wet spirometers d it can not be measured directly
The residual volume can not be measured directly.
How is residual volume measured?Residual volume is known to be measured by what we call a gas dilution test.
Note that this test often measures how the concentration of the gases in the container changes.
What is residual volume?This is known to be the Volume of air that is left over after a FORCED EXPIRATION. Note that it is one that cannot be measured by a spirometer.
Hence, The residual volume can not be measured directly.
Learn more about residual volume from
https://brainly.com/question/12897209
#SPJ1
What special enterprise VPN supported by Cisco devices creates VPN tunnels between branch locations as needed rather than requiring constant, static tunnels
Answer:
Dynamic Multipoint VPN
Explanation:
A coworker is exploring virtualization for some development projects, and is trying to decide between a bare metal hypervisor and a hosted one. Which of the following pieces of advice should you give
The pieces of advice that one should give are:
A hosted hypervisor will be easier to set up and maintain if you're new to virtualization.Bare metal hypervisors can run more VMs on the same hardwareWhat is virtualization?Virtualization is one that depends on software so as to be able to simulate hardware functionality and make a kind of a virtual computer system.
Hence, The pieces of advice that one should give are:
A hosted hypervisor will be easier to set up and maintain if you're new to virtualization.Bare metal hypervisors can run more VMs on the same hardwareSee full question below
A coworker is exploring virtualization for some development projects and is trying to decide between a bare metal hypervisor and a hosted one. Which of the following pieces of advice should you give? Choose all that apply
answer choices
A hosted hypervisor will be easier to set up and maintain if you're new to virtualization.
Bare metal hypervisors can run more VMs on the same hardware
You can run a bare metal hypervisor within your existing operating system.
Learn more about virtualization from
https://brainly.com/question/13204456
#SPJ1
An intern at an IT company provisioned a Linux based On-demand EC2 instance with per-second billing but terminated it within 30 seconds as he wanted to provision another instance type. What is the duration for which the instance would be charged
The duration for which the instance would be charged is known to be c. 60 seconds in regards to the (Billing and Pricing).
What are pricing models?Pricing modeling is known to be the ways or the methods a person is able or can use to know the right price for a products or services.
Note that in the case above, since it involves billing and pricing, The duration for which the instance would be charged is known to be c. 60 seconds.
See options below
a. 600 seconds
b. 300 seconds
c. 60 seconds
d. 30 seconds
Learn more about billing from
https://brainly.com/question/24719924
#SPJ1
Today, the standard term for placing telephone calls over the Internet or any other type of data network is ____.
Answer:
VOIP (voice over internet protocol )
Which methods or commands provide access to superuser privileges for authorized users?
In Linux computer systems, the methods and commands that provide access to superuser privileges for authorized end users are:
The su command.Logging into the root account.The sudo command.What is a Linux command?A Linux command can be defined as a software program that is designed and developed to run on the command line, in order to enable an administrator (end user) of a Linux network perform both basic and advanced tasks by entering a line of text.
In Linux computer systems, some examples of the methods and commands that provide access to superuser privileges for authorized administrators (end users) include the following:
The su command.Logging into the root account.The sudo command.Read more on Linux commands here: brainly.com/question/25480553
#SPJ1
what is the internet
The Internet, sometimes called simply "the Net," is a worldwide system of computer networks -- a network of networks in which users at any one computer can, if they have permission, get information from any other computer
☆...hope this helps...☆
_♡_mashi_♡_
This question involves the creation and use of a spinner to generate random numbers in a game. a gamespinner object represents a spinner with a given number of sectors, all equal in size. the gamespinner class supports the following behaviors.
creating a new spinner with a specified number of sectors
spinning a spinner and reporting the result
reporting the length of the current run, the number of consecutive spins that are the same as the most recent spin
write the complete gamespinner class. your implementation must meet all specifications and conform to the example.
Using the knowledge in computational language in JAVA it is possible to write a code that generate random numbers in a game
Writting the code in JAVA:public class GameSpinner {
int spinner;
int num;
int current;
public GameSpinner(int spinner) {
super();
this.spinner = spinner;
this.current = 0;
this.num = 0;
}
public int spin() {
int curr = 1 + (int) (Math.random() * spinner);
if (this.current == 0 || this.num == 0) {
this.current = 1;
this.num = curr;
return curr;
}
if (this.num == curr) {
this.current = this.current + 1;
return curr;
} else {
this.num = curr;
this.current = 1;
return curr;
}
}
public int currentRun() {
return this.current;
}
}
GameSpinnerTest.java
public class GameSpinnerTest {
public static void main(String[] args) {
// TODO Auto-generated method stub
GameSpinner g = new GameSpinner(4);
System.out.println("g.currentRun() : "+g.currentRun());
System.out.println("g.spin() : "+g.spin());
System.out.println("g.currentRun() : "+g.currentRun());
System.out.println("g.spin() : "+g.spin());
System.out.println("g.currentRun() : "+g.currentRun());
System.out.println("g.spin() : "+g.spin());
System.out.println("g.currentRun() : "+g.currentRun());
System.out.println("g.spin() : "+g.spin());
System.out.println("g.currentRun() : "+g.currentRun());
System.out.println("g.spin() : "+g.spin());
System.out.println("g.spin() : "+g.spin());
System.out.println("g.spin() : "+g.spin());
System.out.println("g.currentRun() : "+g.currentRun());
}
}
Output
g.currentRun() : 0
g.spin() : 1
g.currentRun() : 1
g.spin() : 4
g.currentRun() : 1
g.spin() : 4
g.currentRun() : 2
g.spin() : 3
g.currentRun() : 1
g.spin() : 3
g.spin() : 2
g.spin() : 2
g.currentRun() : 2
See more about JAVA at brainly.com/question/12975450
#SPJ1
Any factor that leads businesses to collectively expect lower rates of return on their investments ______ investment demand.
Answer:
Reduces investment demand
Question 6 options: This is a category or partitioned group of the small units of a programming language include its numeric literals, operators, and special words.
Lexeme is a category or partitioned group of the small units of a programming language include its numeric literals, operators, and special words.
What is a lexeme in programming?Lexemes are known to be those character strings that are put together from the character group of a program, and the token stands for what aspect of the program's grammar they are made of.
Hence, Lexeme is a category or partitioned group of the small units of a programming language include its numeric literals, operators, and special words.
Learn more about Lexeme from
https://brainly.com/question/14125370
#SPJ1
A JavaScript __________ runs when something calls it. a. Object b. Programming language c. Property d. JavaScript e. Function
Function, I think.
Hope it helps!
To create a datasheet that lists all herbs that are Perennials, Jorge will create a new query. The Perennial field has a data type of Yes/No. Which criterion should Jorge use in the query for the Perennial field
The criterion that Jorge should use in the query for the Perennial field is Yes
What is a Datasheet?This refers to the document that summarizes the product specifications and other necessary details of the project.
Hence, we can see that Jorge has created a database for the herb garden he is planting this spring.
The fields in the database include Plant Name, When to Plant, Amount of Sun, Annual, and Perennial.
Therefore, the criterion that Jorge should use in the query for the Perennial field is Yes
Read more about datasheets here:
https://brainly.com/question/27362402
#SPJ1
In the case above, to create a datasheet that lists all herbs that are Perennials, Jorge will create a new query. The Perennial field has a data type of Yes.
What means datasheet?A datasheet is known to be a kind of a document that is known to be often printed or electronic that gives a kind of a details in regards to a product, such as a computer, computer component, and others.
Note that the datasheet is made up information that can be used to be able to make a buying decision about a product or services by giving technical specifications in regards to the product.
Hence the response is yes, In the case above, to create a datasheet that lists all herbs that are Perennials, Jorge will create a new query. The Perennial field has a data type of Yes.
See full question below
Jorge has created a database for the herb garden he is planting this spring. Fields in the database include: Plant Name, When to Plant, Amount of Sun, Annual, and Perennial. He needs to answer the following questions using his database.Which plants need full sun?Which plants are Perennials? To create a datasheet that lists all herbs that are Perennials, Jorge will create a new query. The Perennial field has a data type of Yes/No. Which criterion should Jorge use in the query for the Perennial field?
Learn more about Perennial field from
https://brainly.com/question/9465492
#SPJ1
Most ________ take input from a controller from either a radio joystick or a wi-fi connected tablet or laptop and act as an output device, sending back video and sound to the user.
Most drones take input from a controller from either a radio joystick or a wi-fi connected tablet or laptop.
What is a drone used for?Drones are known to be devices that are said to have a lot of functions, such as monitoring climate change and it is often used to carrying out a lot of search operations after natural disasters must have occurred, and others.
Note that in the case above, Most drones take input from a controller from either a radio joystick or a wi-fi connected tablet or laptop.
Learn more about input from
https://brainly.com/question/5451281
#SPJ1
Class ____________ allow you to create one version of a class, without having to replicate code to handle multiple data types.
Class templates allow you to create one version of a class, without having to replicate code to handle multiple data types.
Answer:
Class templates allow you to create one version of a class, without having to replicate code to handle multiple data types.
Explanation:
A template is a general and already formatted standard that many people can use and customize on their own. For example, a PowerPoint template already has the font size, font, and background already picked, and you can put what you want on it.
HELPPPP MEEEE!!!!! ITS LIFE OR MUERTEEE
The author uses the text structure of ____
a. problem and solution
b. cause and effect
c.compare and contrast
d.sequence of events
to show that _____
a.navigators
b.muliple signals
c. electromagnetic traps
d. quartx crystal oscillators
The author uses the text structure of compare and contrast to show multiple signals.
What is Text structures?This is a term that connote the method used by authors to put together information in text.
Note that in the case above, The author uses the text structure of compare and contrast to show multiple signals.
Learn more about text structure from
https://brainly.com/question/12053427
#SPJ1