why lithium chloride has a higher melting point than hydrogen chloride. refer to structure and bonding in your answers
​

The heavy oxygen (H218O) from photosynthesizing Chlorella cells is likely to be found in the carbohydrates they produce.

If photosynthesizing Chlorella (a unicellular green alga) cells are supplied with water made with 18O (H218O) and the cells are allowed to photosynthesize for a short period of time, the heavy oxygen is likely to be found in the oxygen gas released during photosynthesis.

Chlorella is a single-celled green alga that undergoes photosynthesis. Photosynthesis is the process by which plants and algae convert light energy into chemical energy. The process occurs in two phases: light-dependent reactions and the Calvin cycle (light-independent reactions).

The light-dependent reactions occur in the thylakoid membrane of the chloroplasts, and the Calvin cycle occurs in the stroma. In the light-dependent reactions, light energy is captured by chlorophyll and other pigments, and this energy is used to generate ATP (adenosine triphosphate) and NADPH (nicotinamide adenine dinucleotide phosphate).

The oxygen gas released during photosynthesis is derived from water molecules. During photosynthesis, water is split into hydrogen ions, electrons, and oxygen gas.The oxygen atoms in the water molecules are used to create oxygen gas. If photosynthesizing Chlorella cells are given water made with 18O (H218O), the heavy oxygen will be found in the oxygen gas released during photosynthesis.

Learn more about heavy oxygen here:

brainly.com/question/14949619

#SMJ11

Answer:

To determine the volume of oxygen gas needed to make an optimum mixture with 5 mL of hydrogen gas, we need to know the ratio of hydrogen to oxygen in the mixture.

The optimum ratio of hydrogen to oxygen for combustion is 2:1 by volume. This means that for every 2 volumes of hydrogen gas, we need 1 volume of oxygen gas.

Therefore, to calculate the volume of oxygen gas needed to make an optimum mixture with 5 mL of hydrogen gas, we can use the following formula:

volume of oxygen gas = (volume of hydrogen gas) / 2

Plugging in the values, we get:

volume of oxygen gas = (5 mL) / 2

volume of oxygen gas = 2.5 mL

So we would need 2.5 mL of oxygen gas to make an optimum mixture with 5 mL of hydrogen gas

The statement "enzymes reduce entropy of their substrates in reactions with multiple reactants" is possible because enzymes lower the activation energy of chemical reactions.

Enzymes are biocatalysts that are produced by living organisms. They can increase the rate of chemical reactions without being consumed during the process. Enzymes are proteins made up of chains of amino acids, and their function is determined by their three-dimensional shape.

Enzymes reduce the entropy of their substrates in reactions with multiple reactants. This is possible because they lower the activation energy of chemical reactions. By lowering the activation energy, enzymes make it easier for the reactants to react with one another. Enzymes make chemical reactions more efficient and faster than they would be without the enzyme.

The Arrhenius equation shows the dependence of the rate constant of a chemical reaction on the temperature, activation energy, and frequency factor. The frequency factor represents the frequency at which reactant molecules collide and produce products. When enzymes are present, the activation energy required for the chemical reaction is lowered, making the frequency factor and the rate constant of the reaction higher. This leads to an increase in the rate of the chemical reaction.

The equation is given as; k = Ae-Ea/RT,

Where

Learn more about enzymes: https://brainly.com/question/1596855

#SPJ11

Components that are typically included when citing a journal article are, volume or issue number, author(s), name of journal, page number(s), year of publication are typically included when citing a journal article. The correct choices are a, b, c, d, e.

The abstract, comments, and conclusions may or may not be included depending on the citation style and the specific requirements of the report. When citing a journal article in a laboratory report, it is important to include certain components to provide enough information for the reader to locate the article.

The name of the journal in which the article was published should be included, as well as the volume and issue number (if applicable) and the page numbers of the article within the journal. This information helps to identify the specific article within the publication. The author or authors of the article should also be included, typically in the format of last name followed by initials. The year of publication is also important information to include.

To know more about journal articles, here

brainly.com/question/21114475

#SPJ4

The empirical formula of binary ionic compounds formed from the ions Ca2+, Pb4+, F-, and S2- are CaF2, PbF4, CaS and PbS2.

Empirical formula of binary ionic compounds:

Therefore, CaF2, PbF4, CaS and PbS2 are the empirical formulas of the given binary ionic compounds.

Learn more about empirical formulas: https://brainly.com/question/1603500

#SPJ11

b. The temperature of the equilibrium mixture is increased at constant volume. The number of moles of CO (g) in the container will increase when the temperature is increased. The equation given is an exothermic reaction, so increasing the temperature favors the reaction to the right, releasing heat energy and producing more moles of CO (g).

The given equilibrium equation is CO (g) + H2(g) <--> C(s) + H2O (g) ∆H˚ = -131 kJ. The question asked to determine whether the number of moles of CO (g) in the container will increase, decrease or stay the same for different disturbances.

b. The temperature of the equilibrium mixture is increased at constant volume. When the temperature is increased at constant volume, the equilibrium will shift towards the product side in order to counteract the increase in temperature. Since CO (g) is a reactant, the number of moles of CO (g) will decrease after the disturbance is applied, so the correct answer is "decrease."

c. The volume of the container is decreased at constant temperature.

When the volume of the container is decreased at constant temperature, the pressure inside the container will increase, which will cause the equilibrium to shift towards the side with fewer gas moles to counteract the increase in pressure. CO (g) has one gas mole, and H2O (g) and H2 (g) have two gas moles. Therefore, the equilibrium will shift towards the side with fewer gas moles, which is the product side. This means that the number of moles of CO (g) will decrease, so the correct answer is "decrease."

d. The graphite pellets are pulverized. When the graphite pellets are pulverized, the surface area of C(s) will increase. This will increase the rate of reaction from the reactant side to the product side. The reaction will continue until the equilibrium is reestablished, but the number of moles of CO (g) will not change, so the correct answer is "stay the same." Therefore, the correct answer is b. The temperature of the equilibrium mixture is increased at constant volume.

To know more about volume, click on the below link:

https://brainly.com/question/1578538

#SPJ11

The average mass of chemistrium (Ch) in amu is: 12.5 amu.

Chemistrium is an element with the atomic number 106. It is a transactinide synthetic element with an atomic weight of 268 u. Until 2009, this element was known as unnilhexium (Unh). It was named chemistrium in honor of the chemistry in recognition of the Moscow-based Joint Institute for Nuclear Research's contributions to the synthesis of new elements.

If a sample of the element chemistrium (Ch) contains 100 atoms of Ch-12 and 10 atoms of Ch-13 (for a total of 110 atoms in the sample), the average mass of chemistrium in amu can be calculated as follows:

Average mass of Ch = [(number of atoms of Ch-12 x atomic weight of Ch-12) + (number of atoms of Ch-13 x atomic weight of Ch-13)] / Total number of atoms of Ch= [(100 x 12.000000) + (10 x 13.003355)] / 110= [1200.0000 + 130.03355] / 110= 1330.03355 / 110= 12.18212318 amu, which is rounded off to 12.5 amu.

Learn more about element: https://brainly.com/question/25608430

#SPJ11

The equation that allows you to calculate the mass of sodium in 1.5 grams of sodium chloride correctly is

Mol NaCI / 58.44 g NaCI X mol Na / NaCI X 22.99 g Na / mol Na =.

The mass of the sodium can be calculated with the aid of a mole ratio from the sodium chloride (NaCl). We will need to apply stoichiometric mole ratios to convert between the number of atoms, ions, or molecules in a reaction and the mass or volume of the reactants and goods.

To calculate the mass of sodium in 1.5 grams of sodium chloride, we need to use the following formula:

Mol NaCI / 58.44 g NaCI X mol Na / NaCI X 22.99 g Na / mol Na =

As we can see from the equation, the mass of sodium is determined by multiplying a mol ratio by the number of grams of sodium chloride used.

Answer: A. Mol NaCI / 58.44 g NaCI X mol Na / NaCI X 22.99 g Na / mol Na

to know more about stoichiometry refer here:

https://brainly.com/question/30215297#

#SPJ11

The balanced equation for the neutralization reaction between oxalic acid (H2C2O4) and sodium hydroxide (NaOH) is H2C2O4 + 2NaOH → Na2C2O4 + 2H2O.

When oxalic acid (H2C2O4) reacts with sodium hydroxide (NaOH) in a neutralization reaction, it produces water (H2O) and sodium oxalate (Na2C2O4), a salt.

The balanced equation for this reaction is:

H2C2O4 + 2NaOH → Na2C2O4 + 2H2O

This balanced equation indicates that one molecule of oxalic acid reacts with two molecules of sodium hydroxide to produce one molecule of sodium oxalate and two molecules of water.

In this reaction, oxalic acid donates two hydrogen ions (H+) to the sodium hydroxide, which donates one hydroxide ion (OH-) to form water and sodium oxalate. The reaction is considered a neutralization reaction because the acid and base neutralize each other, resulting in the formation of salt and water.

learn more oxalic acid here:

https://brainly.com/question/11101969

#SPJ4

DNA polymerase differs from RNA polymerase being that the former synthesizes a double stranded DNA while the latter synthesizes a single stranded RNA.

Polymerase is generally any of various enzymes that catalyze the formation of polymers of DNA or RNA using an existing strand of RNA or DNA respectively as a template.

DNA and RNA polymerase are enzymes responsible for the process of DNA and RNA replication i.e. copy of two identical DNA/RNA molecules from a single strand.

Both DNA polymerase and RNA polymerase share the same end goal i.e. synthesizing nucleic acid in the cell. However, DNA polymerase produces double stranded DNA, whereas RNA polymerase produces single stranded RNA.

Learn more about about polymerase at: https://brainly.com/question/29377728

#SPJ1

It is difficult to answer this question without more information about the 4 compounds mentioned. However, based on the statement given, if a compound has a smaller HOMO-LUMO energy gap, it means that it requires less energy to excite an electron from the HOMO to the LUMO orbital.

As a result, such a compound would absorb light of a longer wavelength compared to compounds with larger HOMO-LUMO energy gaps, which require more energy to promote an electron.

Therefore, if compound "v" has the smallest HOMO-LUMO energy gap among the 4 compounds mentioned, it is likely that it would absorb light of a longer wavelength compared to the other compounds.

For more questions like wavelength visit the link below:

https://brainly.com/question/29448414

#SPJ11

The given figure is shown below:

Given figure from which shaft A is made of AISI 1020 hot-rolled steel, is welded to a fixed support and is subjected to loading by equal and opposite forces F via shaft B.

A theoretical stress-concentration factor Kts of 1.6 is induced by the 1/8" fillet. The length of shaft A from the fixed support to the connection at shaft B is 2 ft. The load F cycles from 150 t0 500 lbf. To find:

Factor of safety for infinite life using the modified Goodman fatigue failure criterion using the von Mises combined stress approach for shaft A.

Solution: The factor of safety for infinite life can be given by the following formula:

Factor of safety for infinite life= σ′ut1.5σ′a + σm

Here, σm = (σ1+σ2)/2= (800+400)/2= 600 psi

σa = (σ1-σ2)/2= (800-400)/2= 200 psi

σ′ut = σut/Kf= 64000/1.5 = 42666.67 psi

The alternating stress (σa) can be obtained as follows:

The force F can be given as,F= 150 + 350sin(πn/60) …(i)Where n is the rotational speed in rpm. For the given data, n= 1800 rpm.

Substituting the values, we get,

F= 150 + 350sin(π×1800/60)= 500 lb

Substituting the values of force and cross-sectional area of shaft A, we get,

σa= 4F/πd²= 4×500/π×0.25²= 4080 psi

Thus, substituting the above values in the formula of factor of safety, we get,

Factor of safety for infinite life= σ′ut1.5

σ′a + σm= 42666.67/1.5×4080 + 600= 4.23

Hence, the factor of safety for infinite life using the modified Goodman fatigue failure criterion using the von Mises combined stress approach for shaft A is 4.23.

To learn more about "von mises", visit: https://brainly.com/question/13440986

#SPJ11

We can find the MFM of the compound by dividing the given molecular weight by the empirical formula weight.
Molecular weight of the compound is not given in the question, so we cannot calculate the molecular formula of the compound.

The given empirical formula is P2O5.

To obtain the molecular formula of the compound, we have to find its molecular weight.

The molecular formula of a compound is a multiple of its empirical formula mass.
The empirical formula mass of the compound can be obtained by adding the atomic masses of its constituent atoms. For the empirical formula P2O5, the atomic mass of one phosphorus atom (P) is 31.0 g/mol, and the atomic mass of one oxygen atom (O) is 16.0 g/mol.
Empirical formula mass (EFM) = 2 × atomic mass of P + 5 × atomic mass of O
EFM = 2 × 31.0 g/mol + 5 × 16.0 g/mol
EFM = 62.0 g/mol + 80.0 g/mol
EFM = 142.0 g/mol
The molecular formula mass (MFM) of the compound is a multiple of its empirical formula mass.

Therefore, we cannot determine the molecular formula of the compound with the given information.

For similar question molecular formula.

https://brainly.com/question/26388921

#SPJ11

In order to calculate the theoretical yield of sulfuric acid, we need to know the balanced chemical equation for the reaction between sulfur and oxygen to form sulfur trioxide, and then the reaction between sulfur trioxide and water to form sulfuric acid. The balanced chemical equation for these reactions are:

2S (s) + 3O2 (g) → 2SO3 (g)

SO3 (g) + H2O (l) → H2SO4 (aq)

From the equation, we can see that 3 moles of O2 are required to react with 2 moles of sulfur to produce 2 moles of SO3, and 1 mole of SO3 reacts with 1 mole of water to produce 1 mole of H2SO4.

Since the limiting reagent is 134.4 L of O2, we need to convert this volume to moles. To do this, we need to know the pressure, temperature, and the number of moles of O2 present. Assuming standard temperature and pressure (STP) of 0°C and 1 atm, the number of moles of O2 can be calculated using the ideal gas law:

PV = nRT

where P = 1 atm, V = 134.4 L, n = ?, R = 0.08206 L atm/mol K, and T = 273 K.

Solving for n, we get:

n = PV/RT = (1 atm)(134.4 L)/(0.08206 L atm/mol K)(273 K) = 5.29 mol O2

Since 3 moles of O2 are required to react with 2 moles of sulfur to produce 2 moles of SO3, the number of moles of SO3 produced is:

(2/3) × 5.29 mol = 3.53 mol

Since 1 mole of SO3 reacts with 1 mole of water to produce 1 mole of H2SO4, the number of moles of H2SO4 produced is:

3.53 mol H2SO4

Finally, we can convert the number of moles of H2SO4 to grams using the molar mass of H2SO4:

molar mass of H2SO4 = 2(1.008 g/mol) + 32.06 g/mol + 4(16.00 g/mol) = 98.08 g/mol

The theoretical yield of sulfuric acid is therefore:

3.53 mol H2SO4 × 98.08 g/mol = 345.7 g H2SO4

Therefore, the theoretical yield of sulfuric acid if the limiting reagent is 134.4 L of O2 is 345.7 g.

Learn more about theoretical yield from https://brainly.com/question/9809198

#SPJ1

At the onset of puberty, the pituitary gland in the brain starts secreting high pulses of hormones called gonadotropins.

The pituitary gland is a small, bean-shaped gland located at the base of the brain, in a small depression of the skull called the sella turcica. It is often referred to as the "master gland" because it controls and regulates the functions of several other glands in the body. The pituitary gland is divided into two main parts: the anterior pituitary and the posterior pituitary.

The pituitary gland produces and releases several hormones, including growth hormone, thyroid-stimulating hormone, adrenocorticotropic hormone, follicle-stimulating hormone, luteinizing hormone, prolactin, and oxytocin. These hormones play critical roles in regulating growth and development, metabolism, reproduction, and the body's response to stress.

To learn more about Pituitary gland visit here:

brainly.com/question/12499901

#SPJ4

Option A is the correct statement for the process was exothermic that a large amount of heat is released when sodium metal is exposed to chlorine gas.

Learn more about sodium chloride: https://brainly.com/question/28106660

#SPJ11

Menthol, like methanol, occurs naturally and has several isomers. One structural characteristic of menthol that is responsible for it having enantiomers is that it has a chiral center.

Chiral centers are atoms with four different substituents attached to them, and they are a type of stereocenter. Menthol has a chiral center, which means it has two possible enantiomers.

Enantiomers are molecules that are mirror images of each other and cannot be superimposed on one another.

The two enantiomers of menthol are (1R,2S,5R)-(−)-menthol and (1S,2R,5S)-(+)-menthol. They have identical physical and chemical properties, except for their interaction with polarized light. This is due to the fact that they rotate plane-polarized light in opposite directions.

To learn more about "menthol", visit: brainly.com/question/21296029

#SPJ11

The statements that are always true for a reaction at equilibrium are as follows:

I. The rate of the forward and reverse reactions are equal.

II. The concentrations of the reactants and the products remain constant.

III. The amount of reactants is equal to the amount of products.

The correct option is D) I, II, and III.

I. The rate of the forward and reverse reactions are equal

At equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction. This means that there is no net change in the concentration of the reactants and products.

II. The concentrations of the reactants and the products remain constant

At equilibrium, the concentrations of the reactants and products remain constant. However, this does not mean that the concentrations of the reactants and products are equal. It only means that the concentrations remain constant.

III. The amount of reactants is equal to the amount of products

At equilibrium, the amount of reactants is equal to the amount of products. This means that the ratio of the concentrations of the products to the reactants, known as the equilibrium constant, is a fixed value.

Learn more about reaction at equilibrium here: https://brainly.com/question/18849238

#SPJ11

A 3.6102 M HI solution has a pH of 1.44. A 9.23102 M HClO4 solution has a pH of 0.036. The mass-based solution with 1.01% HCl has a pH of 2.09 in water.

The concentration of hydrogen ions (H+) in a solution determines the pH, which is a measurement of the solution's acidity or basicity. The pH values of various solutions are measured in the examples provided. Strong acids, HI and HClO4, are present in the first two solutions. Due to its lower pH, HI is a stronger acid than HClO4. The third solution, which comprises a combination of HClO4 and HCl and is weaker than the previous two because of its higher pH level, contains HCl. The pH of the final solution, which contains 1.01% HCl by mass, is 2.09, showing that it is a weak acid.

learn more about solution here:

https://brainly.com/question/30665317

#SPJ4

17.264 g of 2KI (potassium iodide) is necessary to completely react with 17.3 g of Pb(NO3)2 in a precipitation reaction.

To calculate the mass of the first reactant required, we will use the mole concept.

Let's first write the balanced chemical equation.

A 2KI(aq) + Pb(NO₃)₂ (aq) → PbI₂(s) + 2KNO₃(aq)

We need to find the number of moles of Pb(NO₃)₂.

To do that, we will use the given mass of Pb(NO₃)₂ and its molar mass.

Molar mass of Pb(NO₃)₂ = 207.2 + 3(14.01) + 6(16) = 331.2 g/mol

Number of moles of Pb(NO₃)₂ = mass / molar mass = 17.3 / 331.2 = 0.052 moles

From the balanced chemical equation, we see that 1 mole of Pb(NO₃)₂ reacts with 2 moles of KI.

Therefore, the number of moles of KI required would be twice the number of moles of Pb(NO₃)₂.

The number of moles of KI required = 2 x 0.052 = 0.104 moles

To calculate the mass of KI required, we will use its molar mass.

The molar mass of KI = 39.10 + 126.90 = 166.0 g/mol

Mass of KI required = a number of moles x molar mass = 0.104 x 166.0 = 17.264 g

Therefore, 17.264 g of KI is required to completely react with 17.3 g of Pb(NO₃)₂.

Learn more about the calculation of grams here:

https://brainly.com/question/28902645

#SPJ11

The condition that Carbon dioxide gas is most soluble in water is under: 4. low temperature and high pressure

Carbon dioxide gas is most soluble in water under conditions of low temperature and high pressure, which causes the gas molecules to dissolve more readily into the water molecules.

This is because the solubility of a gas in water is dependent on factors such as temperature, pressure, and the nature of the gas and solvent. At higher temperatures, the kinetic energy of the gas molecules increases, causing them to move more rapidly and escape from the water more easily, while at lower temperatures, the solubility of the gas increases.

Similarly, at higher pressures, more gas molecules are forced into contact with the water, increasing the likelihood of dissolution.

Learn more about carbon dioxide gas on:

https://brainly.com/question/11867819

#SPJ1

a) an acid that produces one hydrogen atom. Monoprotic acid refers to an acid that donates only one hydrogen ion (H+) in an aqueous solution.

An acid that can only donate one hydrogen ion (H+) in an aqueous solution is referred described as being "monoprotic." This indicates that just one hydrogen ion may be emitted for each acid molecule. In contrast, polyprotic acids are able to contribute a number of hydrogen ions in solution.

Titration of a monoprotic acid solution with NaOH causes the NaOH to react with the acid's H+ ions to produce water and salt. The concentration of the acid may be calculated from the quantity of NaOH needed to fully neutralize the H+ ions in the acid solution.

Acetic acid and hydrochloric acid (HCl) are examples of monoprotic acids (CH3COOH).

learn about Monoprotic here:

https://brainly.com/question/18724098

#SPJ4

There are two possible constitutional isomers in the dichlorination of propane. These are 1,2-dichloropropane and 1,3-dichloropropane.

1,2-dichloropropane has a chlorine atom on each of the first two carbon atoms of the propane chain. The structural formula is CH3CHClCH2Cl. 1,3-dichloropropane has a chlorine atom on the first and third carbon atoms of the propane chain. The structural formula is CH3CH2CHCl2.

The reason for there being only two constitutional isomers is due to the symmetry of the propane molecule. The carbon chain has two identical ends, and so adding two chlorine atoms will result in either the 1,2 or 1,3 positions on the chain.

To learn more about constitutional isomers, here

https://brainly.com/question/30826773

#SPJ4

Between pH 6.8 and 11.5 Chromium(III)hydroxide has relatively little solubility. The product of solubility is roughly 1 x 10–30. Hence, 2.76 1010 is the solubility product of the chromium (II) hydroxide ion.

Chromium is a highly toxic heavy metal that is harmful to both humans and the environment. Industrial wastewater from processes like mining, tanning, electroplating, wood preservatives, paints, textile dyeing, and factories that make industrial inorganic chemicals and pigments is frequently found in water streams.

A sparingly soluble salt's solubility product (Ksp) is the result of the equilibrium molar concentrations of its ions (moles/l) in a saturated solution of water.

To know more about solubility product visit:-

brainly.com/question/1419865

#SPJ1

Volatile organic compounds are organic chemicals that form toxic fumes.

Volatile organic compounds, or VOCs, are organic chemicals that readily vaporize at room temperature. They are emitted from a wide range of products and processes. Benzene, toluene, and xylene are examples of volatile organic compounds (VOCs). VOCs have been linked to a variety of health problems, including asthma and headaches. They can also cause irritation of the eyes, nose, and throat.

VOCs are released by a variety of sources, including paint, building materials, and household cleaning products. Gasoline, diesel fuel, and other fuels are also sources of VOCs. Many VOCs are also produced by natural sources like trees and vegetation, which is why they are present in outdoor air in addition to indoor air.

Learn more about Volatile Organic Compounds: https://brainly.com/question/15312571

#SPJ11

The volume occupied by 0.108 mol of helium gas at a pressure of 0.92 atm and a temperature of 313 K is 2.3 L.

The gas laws involve the relationship between the pressure, volume, and temperature of a gas. The ideal gas law can be used to determine the volume of gas that a certain amount of substance occupies at a particular pressure and temperature. The ideal gas law equation is:

PV = nRT

where, P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin (K).

To determine the volume of helium gas that is occupying 0.108 moles at 0.92 atm and 313 K, we need to rearrange the ideal gas law equation to solve for V:

V = (nRT)/P

Substituting the values given, we have:

V = (0.108 mol)(0.08206 L atm/mol K)(313 K)/(0.92 atm)

V = 2.28 L

The volume of gas to two significant figures, the volume is 2.3 L.

Learn more about Volume of gas here:

https://brainly.com/question/15265703

#SPJ11

A catalyzed mechanism for a naturally occurring reaction that destroys ozone is catalytic destruction of ozone. The species that is a catalyst for this reaction is the hydroxyl radical (OH-).

Catalytic destruction of ozone is a chemical reaction that causes the destruction of ozone in the atmosphere. It is a process that happens naturally and involves certain chemical compounds in the atmosphere that act as catalysts.

Catalytic destruction of ozone occurs when atmospheric molecules of ozone are broken down by certain chemicals called catalysts, such as the hydroxyl radical (OH-), that react with the ozone and form new compounds, which further react to cause the destruction of ozone.The catalyzed mechanism for a naturally occurring reaction that destroys ozone is therefore called catalytic destruction of ozone. The hydroxyl radical (OH-) is the species that acts as a catalyst for this reaction.

Learn more about hydroxyl radical at:

https://brainly.com/question/30420339

#SPJ11

Using Beer-Lambert law the initial concentration of the stock solution is 1.10 M.

Start with the Beer-Lambert law, which relates the absorbance of a solution to its concentration and molar absorptivity: A = εlc, where A is the absorbance, ε is the molar absorptivity, l is the path length (in this case, 1 cm), and c is the concentration in Molarity (M).

Rearrange the equation to solve for concentration: c = A/(εl).

Plug in the given values: A = 0.999, ε = 281 [tex]M^{-1}cm^{-1}[/tex], and l = 1 cm.

Calculate the concentration of the final diluted solution: c = 0.999/(281 x 1) = 0.003553 M.

Use the dilution formula to find the concentration of the previous solution before the final dilution: C1V1 = C2V2, where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

In this case, the initial volume is unknown, so we can use a variable x. The first dilution used 20 mL of the previous solution, so the volume of the first diluted solution is 20 mL, and the concentration is C1/2.

The second dilution used 20 mL of the first diluted solution, so the volume of the final diluted solution is 100 mL, and the concentration is C1/4.

Set up two equations to solve for C1 and x:

C1/2 = 0.003553 (from the first dilution)

C1/4 = (C1/2)(20/x) (from the second dilution, using the dilution formula)

Simplify the second equation by multiplying both sides by 4:

C1 = (C1/2)(80/x)

Solve for x by dividing both sides by C1/2 and simplifying:

x = 160

Finally, use the dilution formula to find the initial concentration:

C1(20 mL) = (0.003553)(100 mL)

C1 = 1.10 M

Therefore, the initial concentration of the stock solution was 1.10 M.

Learn more about the concentration at

https://brainly.com/question/10725862

#SPJ4

The pH of the HCl solution which is titrated by 0.5L of 1.0m NaOH is 7.

The pH after the titration of 0.5 L of 1.0 M HCl solution with 0.5 L of 1.0 M NaOH can be calculated as follows:

To start, we must write down the balanced chemical equation for the reaction between hydrochloric acid and sodium hydroxide: HCl (aq) + NaOH (aq) → NaCl (aq) + H2O (l)

The moles of HCl and NaOH involved in the reaction can be calculated as follows: 0.5 L of 1.0 M HCl = 0.5 mol HCl

0.5 L of 1.0 M NaOH = 0.5 mol NaOH

Since NaOH is in excess, it reacts completely with HCl, which means that 0.5 mol NaOH will react with 0.5 mol HCl. The balanced chemical equation shows that one mole of HCl reacts with one mole of NaOH to produce one mole of water, so all of the HCl has been neutralized, leaving only NaCl and water behind.

The concentration of the NaCl solution that results can be calculated as follows:

Concentration of NaCl = 0.5 mol NaCl / 1.0 L = 0.5 M NaCl

The pH of the resulting solution of NaCl can be calculated using the following equation:

pH = - log [H⁺]

where [H⁺] is the concentration of hydrogen ions in the solution. Since NaCl is a salt and completely dissociates in water, it does not contribute any hydrogen ions to the solution, which means that the concentration of hydrogen ions is zero. As a result, the pH of the solution is equal to 7, which is neutral.

Learn more about pH here:

https://brainly.com/question/491373

#SPJ11

The answer that comes closest to the result is the letter b. However, the exact number is 9.86 x 10²⁶  CaCl₂ formula units applied per mile.

To solve this, we need to calculate how much CaCl₂ (calcium chloride) is being applied.

To do this, we can use the conversion factor 1 lb = 453.6 g. We are given that 400 lb of CaCl₂ is applied per mile of highway. This is equal to 400 x 453.6 g = 181,440 gCaCl₂ applied per mile.

We also know that the molar mass of CaCl₂ is 110.98 g/mol. This means that 181,440 g CaCl₂ = (181,440 g)/ (110.98 g/mol) = 1,640 mol CaCl₂ applied per mile.

Finally, we can calculate the number of formula units of CaCl₂ applied. This is equal to the number of moles of CaCl₂ applied multiplied by Avogadro's number (6.02 x 10²³). Therefore, 1,640 molCaCl₂ applied per mile is equal to 1,640 x 6.02 x 10²³ = 9.86 x 10²⁶  CaCl₂ formula units applied per mile.

read about formula units

https://brainly.com/question/24529075

#SPJ11