Write the chemical equation for the ionization of water. ionization of water:

Strong base and conjugate base concentrations in the solution are both equal at moles.

At the mid-point of a titration of a weak acid and a strong base, the pH of the solution is equal to the pKa of the weak acid. This is due to the solution's equal amounts of conjugate base and strong base molecules.As the strong base is added, it reacts with the weak acid to produce the conjugate base and the hydrogen ions (H+) are neutralized. At the mid-point, the moles of conjugate base and strong base present in the solution are equal and so the pH of the solution is equal to the pKa of the weak acid.

learn more about conjugate base Refer:brainly.com/question/30225100

#SPJ1

(a) Methane -the molecular shape is tetrahedral shape.

(b) Ammonia - the molecular shape is trigonal pyramidal.

(c) Sulfur trioxide -  the molecular shape is trigonal planar shape.

(d) Water -  the molecular shape is bent shape.

(e) Carbon dioxide - the molecular shape is a linear shape.

Molecular shape refers to the three-dimensional arrangement of atoms in a molecule. It describes the relative positions of the atoms and the angles between the chemical bonds that connect them.

The shape of a molecule is determined by the arrangement of its electrons and the way in which the atoms share these electrons to form chemical bonds. The shape of a molecule can have a significant impact on its physical and chemical properties, such as its polarity, reactivity, and solubility.

Learn more about molecular shapes here: https://brainly.com/question/11985101

#SPJ1

H2O and CH4 are inorganic substances, whereas C3H6, C22H24, and NO2 are organic substances.

Compounds, which are objects, are created when two or more unique elements bond chemically. The components of a compound are held together by chemical bonds, which are created when atoms share or transfer electrons.

Given that it is made up of two covalently bound elements—hydrogen (H) and oxygen (O)—H2O is an inorganic compound.

Because its carbon (C) and hydrogen (H) atoms are covalently bound, the chemical C3H6 is considered to be organic. Propene, a significant ingredient in the manufacture of plastics and synthetic rubber, is an unsaturated hydrocarbon.

C22H24 is an additional chemical substance, specifically a triterpene hydrocarbon. It is a naturally occurring substance that can be found in a variety of plants and is frequently employed in conventional medicine.

Due to the fact that CH4 only has two elements—carbon (C) and hydrogen (H)—covalently bound to one another, it is an inorganic compound. It is generally referred to as methane and is the simplest and most prevalent hydrocarbon.

Due to the presence of two covalently bound elements—nitrogen (N) and oxygen (O)—NO2 is an inorganic molecule. It is a frequently occurring, highly reactive gas in the atmosphere and a significant source of air pollution.

To know more about compound, visit:

https://brainly.com/question/13516179

#SPJ1

To find the new concentration of a 0.050 M HCl solution after adding 25 mL of water, we can use the formula:

M₁V₁ = M₂V₂

Where:

Given,

Now applying the formula we get,

Therefore, the new concentration of the solution is 0.01875 M.

Learn more about concentration: https://brainly.com/question/2201903

#SPJ11

1. Calcium and Argon are isobars , the correct answer is (A). 2.  number of valence electrons in oxygen atoms is 6, the correct answer is (B) 3.  most of the alpha particles deflected, the correct answer is (D).

Protons are subatomic particles that are found in the nucleus of an atom. They have a positive electrical charge, which is equal and opposite to the negative charge of electrons, the other subatomic particle found in atoms. The number of protons in the nucleus of an atom determines what element the atom is.

The mass of a proton is approximately 1 atomic mass unit (amu), which is about 1.673 x 10⁻²⁷ kg. This is slightly less than the mass of a neutron, which is another subatomic particle found in the nucleus of an atom.

1.  The correct answer is (A) Both Assertion (A) and Reason (R) are true, and Reason (R) is the correct explanation of Assertion (A).

The statement in Assertion is true that Calcium and Argon are isobars because they have the same mass number (40). Isobars are atoms of different elements that have the same mass number but different atomic numbers.

The statement in Reason is also true and provides the explanation for Assertion because the mass number of an atom is equal to the sum of the number of protons and neutrons in its nucleus. Calcium has 20 protons and 20 neutrons, giving it a mass number of 40. Argon has 18 protons and 22 neutrons, also giving it a mass number of 40. Therefore, they have the same number of nucleons and are isobars.

Therefore, option (A) is the correct answer.

2.  The correct answer is (B) Both Assertion (A) and Reason (R) are true but Reason (R) is not the correct explanation of Assertion (A).

The statement in Assertion is true that the number of valence electrons in oxygen atoms is 6. Valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions.

The statement in Reason is also true, but it does not provide the correct explanation for Assertion. Valency refers to the combining capacity of an atom, and it is determined by the number of valence electrons. The valency of oxygen is 2, not 6. Oxygen has 6 valence electrons, but it forms two covalent bonds to complete its octet in most compounds, giving it a valency of 2.

Therefore, option (B) is the correct answer.

3.  The correct answer is (D) Assertion (A) is false but reason (R) is true.

The statement in Assertion is false because most of the alpha particles in Rutherford's experiment were deflected at various angles, and only a few passed straight through the gold foil. This observation led Rutherford to propose the nuclear model of the atom.

The statement in Reason is true. The center of the atom, or nucleus, is positively charged because it contains protons, which have a positive charge. Electrons, which have a negative charge, orbit the nucleus in a cloud-like distribution.

Therefore, option (D) is the correct answer.

To know more about atom visit:

https://brainly.com/question/30282087

#SPJ1

Titration is the best investigation to identify an unknown liquid as acidic, basic, or neutral by measuring its pH level.

A student finds an unlabeled bottle of liquid under his kitchen sink. Titration is the investigation that would best help him identify the unknown liquid as acidic, basic, or neutral.

Titration is the chemical method used to find the amount of acid or base in a given substance. This method is a laboratory technique used to measure the concentration of a known solution (the titrant) with a solution of an unknown concentration (the analyte).

The unknown solution is slowly added to the known solution until it reacts completely, allowing us to calculate the concentration of the unknown solution. Titration may be used to identify an unknown solution as acidic, neutral, or basic by determining its pH level. It's a highly precise technique that's often used in analytical chemistry laboratories to measure the concentration of chemicals.

Learn more about liquid: https://brainly.com/question/1313076

#SPJ11

The oxidation number of atoms (a) 1. (b) 6, and (c) 7 are as follows:The oxidation number of atom 1 is +8,The oxidation number of atom 6 is +5,The oxidation number of atom 7 is -2.The average oxidation number for carbon in this compound is -1.875.

The algorithm method with the formula is used to determine the average oxidation number for carbon in the compound. The formula to calculate the oxidation state of carbon can be given as:

Oxidation state of carbon = (number of carbon atoms x oxidation state of carbon) / total number of atoms.The given compound 8 N 5 2.3.4 consists of 19 atoms, of which 8 are carbon atoms, 5 are nitrogen atoms, and 6 are hydrogen atoms.

The oxidation state of nitrogen is -3 in the compound, and the oxidation state of hydrogen is +1.Now, the oxidation state of carbon is calculated as follows:

Oxidation state of carbon = (8 × oxidation state of carbon) / 19

We are supposed to find the average oxidation number of carbon atoms. To do this, we sum up the oxidation numbers of all carbon atoms and divide the sum by the total number of carbon atoms.

Oxidation state of carbon = (5* -1 + 3* -2 + 6 * +1) / 8

Oxidation state of carbon = (-5 - 6 + 6) / 8

Oxidation state of carbon = -1.875

Thus, the average oxidation number for carbon in this compound is -1.875.

Learn more about oxidation number here:

brainly.com/question/29263066

#SPJ11

The mass of CaCl2 and water that were used are 168.56g and 313.04g, respectively.

The total mass of the mixture is 481.6g, and it is found that the solution of CaCl2 in water forms a mixture that is 35.0% calcium chloride by mass. Therefore, we are supposed to find the masses of CaCl2 and water that were used.

In the given mixture, let's assume the mass of CaCl2 is ‘x’ g, and the mass of water is ‘y’ g.

Now, from the question, it is given that the total mass of the mixture is 481.6 g:

x + y = 481.6 g

1. As per the question, it is also given that the mixture is 35.0% calcium chloride by mass. This means that the ratio of the mass of CaCl2 to the total mass of the mixture is 35/100 or 0.35. So, the mass of CaCl2 present in the mixture is:

Mass of CaCl2 = 0.35 × 481.6 g = 168.56 g

Also, the mass of water in the mixture is the difference between the total mass of the mixture and the mass of CaCl2.

Thus, the mass of CaCl2 and water that were used are 168.56g and 313.04g, respectively.

Learn more about mass: https://brainly.com/question/25959744

#SPJ11

The concentration of a solution is defined as the amount of solute that has been dissolved in a given amount of solvent. The most concentrated solution is one that has the highest amount of solute dissolved in a given amount of solvent is 0.3 mole of solute dissolved.

Concentration is defined as the number of solute particles in a given volume of solution. It can be expressed in a variety of ways, including mass percent, mole fraction, molarity, and molality.

The solution with 0.3 mole of solute dissolved is the most concentrated. 0.1 mole of solute dissolved in 400 ml of solvent

0.2 mole of solute dissolved in 300 ml of solvent

0.3 mole of solute dissolved in 500 ml of solvent.

The concentration of a solution is defined as the amount of solute that has been dissolved in a given amount of solvent. Let's calculate the concentration of each solution using the formula of concentration:

Molarity = Number of moles of solute/Volume of solution (L)

For (1), Number of moles of solute = 0.1 mole. Volume of solution = 400 ml = 0.4 L. Concentration,

C = Number of moles of solute/Volume of solution (L)

C = 0.1/0.4 = 0.25 mol/L

For (2), Number of moles of solute = 0.2 mole. Volume of solution = 300 ml = 0.3 L.

Concentration,

C = Number of moles of solute/Volume of solution (L)

C = 0.2/0.3 = 0.67 mol/L.

For (3), Number of moles of solute = 0.3 mole.

Read more about mole here:

https://brainly.com/question/15356425

#SPJ11

The mass of CO2 produced from the reaction of 37.5 g of C2H6 is 109.92 g.

The balanced chemical equation for the combustion of ethane (C2H6) with oxygen (O2) is:

2C2H6 + 7O2 → 4CO2 + 6H2O

This equation concludes that 2 moles of C2H6 react with 7 moles of O2 to produce 4 moles of CO2 and 6 moles of H2O.

To find the mass of CO2 produced from the reaction of 37.5 g of C2H6, we need to use stoichiometry. Here are the steps to follow:

Calculate the number of moles of C2H6:

moles of C2H6 = mass of C2H6 / molar mass of C2H6

moles of C2H6 = 37.5 g / 30.07 g/mol

moles of C2H6 = 1.248 mol

Use the mole ratio from the balanced chemical equation to calculate the number of moles of CO2 produced:

moles of CO2 = moles of C2H6 × (4 moles of CO2 / 2 moles of C2H6)

moles of CO2 = 1.248 mol × 2

moles of CO2 = 2.496 mol

Calculate the mass of CO2 produced:

mass of CO2 = moles of CO2 × molar mass of CO2

mass of CO2 = 2.496 mol × 44.01 g/mol

mass of CO2 = 109.92 g

Therefore, the mass of CO2 produced from the reaction of 37.5 g of C2H6 is 109.92 g.

To learn more about stoichiometry:

https://brainly.com/question/28780091

#SPJ4

Answer:It's D

Explanation:

The most polar bond without being considered ionic would be O-H.

Ionic bonds are the bond formed by the sharing of electrons between nonmetals to create a molecule that is neutral, while a covalent bond is a bond formed by the sharing of electrons between metals and nonmetals to create a molecule that is neutral.

Polar covalent bonds happen when there is an uneven distribution of electrons between two atoms that are bonded together. This is usually because the electrons are more strongly attracted to one atom over the other.

As a result, one atom will have a partial negative charge, and the other atom will have a partial positive charge.

In the water molecule, the O-H bond is polar because oxygen is more electronegative than hydrogen. Since the difference in electronegativity between hydrogen and oxygen is more significant than between the other atoms in the other bonds, the O-H bond is the most polar.

Learn more about polar bonds here:

https://brainly.com/question/29144393

#SPJ11

2 kg of expanded polyethylene has a volume of 2.17 liters.

Given that,

Density = 0.9g/cm³

Mass = 2kg = 2000g

Density is the substance's mass per unit of volume. Although the Roman letter D may also be used, the sign most frequently used for density is ρ (the lowercase Greek letter rho). A substance's density changes as a function of pressure and temperature. With solids and liquids, this variance is often slight, but for gases, it is much more pronounced.

Density = Mass ÷ Volume

0.92 = 2000 ÷ Volume

Volume = 2000 ÷ 0.92

Volume = 2.17 liters.

Hence, 2 kg of expanded polyethylene has a volume of 2.17 liters.

To learn more about density, refer to:

https://brainly.com/question/26364788

#SPJ4

Your question is in Spanish. The English translation of the question is:

Calculate the volume of 2 kg of expanded polyethylene in liters. ( Density = 0.92g/cm³ )

48 moles of CO2 were produced from 8 moles of glucose under aerobic conditions.

Eight moles of glucose have been oxidized under aerobic conditions, and we need to find the total moles of  CO2 produced.

For this purpose, we will utilize the balanced chemical equation for the complete combustion of glucose.

The balanced equation is given as below:  C6H12O6  + 6O2 → 6CO2 + 6H2O

From the above equation, we can see that one mole of glucose produces six moles of carbon dioxide.

Therefore, eight moles of glucose will produce 8 × 6 = 48 moles of carbon dioxide.

So, the total moles of CO2 produced are 48.

Learn more about glucose: brainly.com/question/397060

#SPJ11

The value of Z for the chemical symbol Y76XZ given that the atom has 70 electrons and 114 neutrons is 70.

The number of protons in the nucleus of an atom is equal to its atomic number(Z). Therefore, to calculate the value of Z, you need to subtract the number of neutrons from the mass number (A).

The number of neutrons is calculated as follows:

Number of neutrons = mass number - atomic number

The mass number(A) is calculated as follows: Number of protons + number of neutrons = mass number.

The total number of electrons is given as 70.

So, number of electrons = number of protons.

Each atom is neutral, so the total positive charge (protons) is equal to the total negative charge (electrons).

Therefore, the number of protons is also equal to 70.

The mass number (A) is the sum of the number of protons and the number of neutrons:

mass number = number of protons + number of neutrons.

Substituting the known values into the above equation:

A = 70 + 114 = 184

Therefore, to calculate the atomic number (Z), you need to subtract the number of neutrons from the mass number:

Z = A - number of neutrons

Z = 184 - 114

Z = 70

Therefore, the value of Z for the chemical symbol Y76XZ given that the atom has 70 electrons and 114 neutrons is 70, and the mass number is 184.

Learn more about chemical symbol: https://brainly.com/question/10892900

#SPJ11

The order of increasing reaction rate of alkyl halides with triethylamine is iodoethane, 1-bromopropane, and 2-bromopropane.

When the primary alkyl halide reacts with the triethylamine, it's faster than the secondary alkyl halide. Since triethylamine is a strong, bulky base that tends to perform nucleophilic substitution, it undergoes a reaction with both primary and secondary alkyl halides. When halides react with triethylamine, the bond between nitrogen and carbon is formed.

In this reaction, the rate of reaction will be slower with secondary alkyl halides due to steric hindrance.  Iodoethane will be more reactive than 1-bromopropane because of the higher electronegativity of iodine which makes it more prone to nucleophilic substitution. Based on the above discussion, the order of increasing rate of reaction with triethylamine is 2-bromopropane < 1-bromopropane < iodoethane.

Therefore, iodoethane is the most reactive of the three alkyl halides, 1-bromopropane is more reactive than  2-bromopropane and 2-bromopropane is the least reactive.

To know more about alkyl halides, refer here:

https://brainly.com/question/17063582#

#SPJ11

The final temperature of the water would be approximately 91°C after 250,000 joules of heat are added.

Heat capacity is the amount of heat energy required to increase the temperature of a substance by one degree Celsius (or one Kelvin). It is a measure of how much energy a substance can absorb without a significant change in its temperature.

The heat capacity of a substance depends on its mass and composition. Substances with more mass or more complex molecular structures generally have higher heat capacities, meaning they require more energy to increase their temperature than substances with less mass or simpler molecular structures.

To solve this problem, we can use the specific heat capacity formula:

Q = m * c * ΔT

where Q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

We can rearrange this formula to solve for ΔT:

ΔT = Q / (m * c)

We are given the mass of the water (m = 785 g), the amount of heat added (Q = 250,000 J), and the specific heat capacity of water (c = 4.184 J/g°C).

Substituting these values into the equation, we get:

ΔT = 250,000 J / (785 g * 4.184 J/g°C)

ΔT ≈ 75.4°C

Therefore, the final temperature of the water would be:

15.0°C + 75.4°C = 91 °C

So the final temperature of the water would be approximately 91 °C after 250,000 joules of heat are added.

To know more about capacity visit:

https://brainly.com/question/28921175

#SPJ1

The  number of moles of CaCO3 and number of moles of CO2 produced by one tablet is 0.00974 mol.

Based on the given information, we can use stoichiometry to calculate the number of moles of CaCO3 in one tablet and the number of moles of CO2 produced.

To calculate the number of moles of CaCO3 in one tablet, we need to know the balanced chemical equation for the reaction between hydrochloric acid (HCl) and calcium carbonate (CaCO3):

CaCO3 + 2HCl → CaCl2 + CO2 + H2O

From the equation, we can see that 1 mole of CaCO3 produces 1 mole of CO2.

Therefore, the number of moles of CaCO3 in one tablet is equal to the number of moles of CO2 produced by the tablet.

The given information states that one tablet reacted with excess hydrochloric acid to produce 0.24 dm3 of carbon dioxide at r.t.p. We can convert the volume of CO2 to moles using the ideal gas law:

PV = nRT

where;

P is the pressure (which is 1 atm at r.t.p.),

V is the volume (0.24 dm3),

n is the number of moles of gas,

R is the gas constant, and

T is the temperature (which is 273 K at r.t.p.).

Rearranging the equation and solving for n, we get:

n = PV/RT = (1 atm)(0.24 dm3)/(0.08206 L·atm/mol·K)(273 K)

n = 0.00974 mol

Learn more about number of moles at: https://brainly.com/question/30337257

#SPJ1

The reduction potential of Cu²⁺ is 0.34 volts and the reduction potential of Ag⁺ is 0.8 volts

The reduction potentials of Ag⁺ and Cu²⁺ relative to the silver and copper electrodes, respectively, can be found by using a vertical ruler to shift the zero point of the reference hydrogen half-reaction.

Relative to the silver electrode, the reduction potential of Ag⁺  is 0.8 volts and

The reduction potential of Cu²⁺ is 0.0 volts.

Relative to the copper electrode, the reduction potential of Ag⁺  is 0.0 volts and

The reduction potential of Cu²⁺ is 0.34 volts.

The reduction potentials of the other half-reactions (Fe²⁺, Zn²⁺) cannot be measured relative to the silver and copper electrodes, as they are not included in the vertical ruler.

Learn more about Standard reduction potentials here:

https://brainly.com/question/2731940

#SPJ11

An unknown gas effuses at a rate 0.667 times the rate of co₂. The molar mass of the unknown gas is 120 g/mol.

The rate of effusion for an ideal gas is proportional to the inverse square root of the gas' molar mass. It's known as Graham's law. Graham's Law explains the rate of effusion of a gas through a small hole into a vacuum. The rate of effusion for an ideal gas is proportional to the inverse square root of the gas' molar mass (relative molecular mass). According to the question, the effusion rate of the unknown gas is 0.667 times that of CO₂.

Let the molar mass of the unknown gas be "x".

Therefore, the effusion rate for the unknown gas is proportional to

.[tex]\[\frac{1}{\sqrt{x}}\].[/tex]

The effusion rate of CO₂ is proportional to \[\frac{1}{\sqrt{44}}\].

Now,

[tex]\[\frac{\text{Effusion rate of the unknown gas}}{\text{Effusion rate of CO}_2}=\frac{0.667}{1}\][/tex]

or,

\[tex]\[\frac{1}{\sqrt{x}}=\frac{0.667}{\sqrt{44}}\][/tex]]

or,

[tex]\[\sqrt{x}=\frac{\sqrt{44}}{0.667}\][/tex]

or,

[tex]\[x=\left ( \frac{\sqrt{44}}{0.667} \right )^{2}\][/tex]

Therefore, the molar mass of the unknown gas is 120 g/mol.

For more such questions on molar mass , Visit:

https://brainly.com/question/21334167

#SPJ11

Answer:109.5g HCL

Explanation: 1st get the GFM of H2S, which is 34g/mol, and divide 57g by it. You get the moles for H2S: 1.7. Put what you have over what you want (have/want) equal to what other chemical you want like this:

8H2S/1.7H2S = 16HCl/X

Solve for it like an algebra equation

8x = 27.2 27.2/8 = 3.4molHCl

Round to sig figs

3molHCl

Multiple by HCL GFM (36.5g/mol)

3mol x 36.5g/mol

109.5gHCl

In the process of lactic acid fermentation, the enzyme lactate dehydrogenase catalyses the conversion of pyruvate to lactate or lactic acid by the addition of hydrogen ions.

The pyruvate that results from glycolysis is transformed into lactic acid during lactic acid fermentation. The synthesis of lactate and NAD+ as a result of the transfer of two highly energetic electrons from NADH to pyruvate is what allows for this conversion. This procedure aids in the renewal of NAD+, which is necessary for glycolysis to carry on making ATP without oxygen. In many organisms, including bacteria, fungi, and animals, lactic acid fermentation is an important process. It is crucial in muscles during vigorous exercise when oxygen supply is constrained.

learn more about lactic acid here:

https://brainly.com/question/10948414

#SPJ4

The highest frequency of the lines that we have in the hydrogen atom will be line D

Frequency is inversely related to wavelength. The wavelength and frequency of a wave are related by the equation:

c = λf

where c is the speed of light, λ (lambda) is the wavelength of the wave, and f is the frequency of the wave. This equation is known as the wave equation.

If the wavelength of a wave increases, then the frequency of the wave must decrease to maintain the same speed. Conversely, if the wavelength of a wave decreases

Learn more about wavelength:https://brainly.com/question/31143857

#SPJ1

The electrostatic potential for an atom is also called D) coulomb potential.

Coulomb's law is the law of electric force that states that the force of attraction or repulsion between two charges is directly proportional to their charges and inversely proportional to the square of the distance between them.

The electrostatic potential energy between two charges is also proportional to the product of the charges and inversely proportional to the distance between them squared.

Therefore, for an atom, the electrostatic potential is directly proportional to the charge of the nucleus and inversely proportional to the distance between the electrons and the nucleus.

Thus, the coulomb potential is the electrostatic potential between the positively charged nucleus and negatively charged electrons of an atom. The correct option is d) coulomb potential.

To know more about Coulomb's law:

https://brainly.com/question/506926

#SPJ11

a) HCl is a stronger acid than H2S due to weak bond between hydrogen and sulfur.

b) H3PO4 is a stronger acid than H3AsO4 due to smaller size of phosphorous atom than the arsenic atom.

c) HBrO3 is a stronger acid than HBrO2 as the oxidation state of Br in HBrO3 is +5.

d) H2C2O4 is a stronger acid than HC2O−4 as HC2O−4 is a conjugate base of H2C2O4.

e) Benzoic acid, C6H5COOH, is a stronger acid than phenol, C6H5OH due to strong resonance structure.

The following observations can be explained as follows:

a) HCl is a stronger acid than H2SIn hydrogen sulfide (H2S). The bond between hydrogen and sulfur is relatively weak. As a result, this bond is more difficult to break than that between hydrogen and chlorine in hydrogen chloride (HCl). Therefore, HCl is a stronger acid than H2S.

b) H3PO4 is a stronger acid than H3AsO4. The phosphorous atom has a smaller size than the arsenic atom. As a result, the P–O bond is more stable than the As–O bond. This makes the H3PO4 a stronger acid than H3AsO4.

c) HBrO3 is a stronger acid than HBrO2. HBrO3 is a stronger acid than HBrO2 since the oxidation state of Br in HBrO3 is +5. In contrast, Br has an oxidation state of +3 in HBrO2. As a result, the bond between Br and oxygen in HBrO3 is weaker, resulting in a higher acidity than in HBrO2.

d) H2C2O4 is a stronger acid than HC2O−4. HC2O−4 is a conjugate base of H2C2O4. The conjugate base is less acidic than the original acid, according to the conjugate acid-base theory. As a result, H2C2O4 is a stronger acid than HC2O−4.

e) Benzoic acid, C6H5COOH, is a stronger acid than phenol, C6H5OH. Benzene ring has a strong resonance structure due to the presence of electron donating OH- group in phenol. Resonance delocalizes the negative charge formed by the loss of a proton, and it makes it less acidic. The absence of an electron-donating group in benzoic acid allows for more hydrogen ion dissociation, making it a stronger acid than phenol.

Learn more about Acid:

https://brainly.com/question/28362783

#SPJ11

The purpose of the recommendations is to provide guidance and advice on a particular topic, and they are typically directed towards a specific audience or group. The language, number, and content of the recommendations will vary depending on the context and purpose. The font and images used should be appropriate and visually appealing.

The questions above pertain to the process of writing recommendations, which involves determining the purpose, target audience, language, and structure of the text. The recommended ideas should be formulated in a logical sequence and should include a mix of existing and new ideas. The text should be written in an attractive font and accompanied by relevant images that support the recommendations. The overall goal is to present the recommendations in a clear and compelling manner that motivates the target audience to take action. By following these guidelines, the resulting text should effectively communicate the recommendations and their intended impact.

To know more about recommendations, here

brainly.com/question/12314151

#SPJ4

--The complete question is, What is the purpose or intention behind writing the recommendations? Who are the recommendations directed towards? In what language should they be written? How many recommendations should be included in our text? Step 2: Formulate the general ideas that will be addressed in the recommendations and the sequence they will follow. What recommendation ideas can be included in our text? Which of the recommendations developed in previous activities will be included in our text? What other recommendation ideas can be included in our text? What font will help make our text attractive? What images can we use to accompany our text? How will we distribute the recommendations and images throughout the page?--

Volume difference between back titration and controlHCI neutralized by NaOH volume difference is 0.0056 moles.

Given,

* Mass of Antacid = 0.5g

* [HCl] = 1M

* [tex]V_{HCl}[/tex] = 5 ml (pipetted out)

* [NaOH] = 1M

* [tex]V_{NaOH}[/tex] - 1.2 ml (consumed)

* Amt. of HCl avaliable for neutralisation = 0.1825 g

* No. of moles of NaOH req. to reach eq. point = 0.0012

* Amt. of HCl neutralised by antalid = 0.1387 g

* Amt. of HCl neutralised by antalid = 0.1387 g

* Amt. of HCl neutralised per gram of antalid = 0.1387 g

Solution: [tex]([/tex][tex]N[/tex] × [tex]V[/tex][tex])_{HCl}[/tex] =  [tex]([/tex][tex]N[/tex] × [tex]V[/tex][tex])_{NaOH}[/tex]

               (1 x 5 ) =  [tex]([/tex][tex]1[/tex] × [tex]V[/tex][tex])_{NaOH}[/tex]

             = [tex]V(NaOH)[/tex] = ( 1 x 5) / 1 = 5ml

In control expt. data  [tex]V(NaOH)[/tex] = 5.6ml

But in given data, [tex]V(NaOH)[/tex] = 1.2ml

So, Volume diff. of NaOH between back titration and control = 5.6 - 1.2 = 4.4ml

So, given follows

So, 4.4 ml of HCl means,

its Conc. will be equal to, 4.4 x 36.5 / 1000 = 0.1606 g

This is correct in control expt. results

In control expt. data, [tex]V(NaOH)[/tex] = 5.6ml

This corresponds to 5.6 x 40 / 1000 = 0.224g

This correspond to 0.224 / 40 = 0.0056 moles

This is correct in control expt. results.

Titration is a laboratory technique used to determine the concentration of an unknown solution by reacting it with a known solution. It is a quantitative method used to determine the amount of a substance in a sample. Titration is often used in chemistry to determine the concentration of acids, bases, and salts.

In a titration, a measured amount of the unknown solution is slowly added to a known solution of a substance with a known concentration called the titrant. The titrant is added until the reaction is complete, and a color change or other observable change occurs. The point at which the reaction is complete is known as the endpoint, and it is usually determined using an indicator, which changes color when the reaction is complete.

To learn more about Titration visit here:

brainly.com/question/2728613

#SPJ4