X is a pink solid. Y is a blue solid. When X is heated, water is produced and the solid turns blue. When water is added to Y, the solid turns pink. What are X and Y?


A) anhydrous cobalt (II) chloride, hydrated cobalt(II)chloride


B) hydrated cobalt (II) chloride, anhydrous cobalt (II) chloride


C) anhydrous copper(II) sulfate, hydrated copper (II) sulfate


D) hydrated copper (II) sulfate, anhydrous copper (II) sulfate

Answers

Answer 1

The answer is D: hydrated copper (II) sulfate, anhydrous copper (II) sulfate.

The key pieces of information are:

• X is a pink solid. When X is heated, water is produced and the solid turns blue.

This describes the property of hydrated copper (II) sulfate. When hydrated copper (II) sulfate is heated, it loses water molecules and turns from pink to blue.

• When water is added to Y, the solid turns pink.

This describes the property of anhydrous copper (II) sulfate. When water is added, it absorbs water molecules and turns from blue to pink.

Cobalt (II) chloride mentioned in the other answers does not exhibit these color changes based on hydration/dehydration. Only copper (II) sulfate turns pink when hydrated and blue when anhydrous.

So the full answers are:

X = hydrated copper (II) sulfate

Y = anhydrous copper (II) sulfate

Hope this explanation helps! Let me know if you have any other questions.


Related Questions

what stereochemical configuration do most amino acids take in vivo?

Answers

In vivo, most naturally occurring amino acids adopt the L-configuration or the L-stereoisomer. The L-configuration refers to the spatial arrangement of atoms around the central carbon atom (the α-carbon) in the amino acid molecule. In this configuration, the amino group (-NH2) is positioned to the left, and the carboxyl group (-COOH) is positioned to the right when the molecule is drawn in the Fischer projection.

The prevalence of the L-configuration in amino acids can be attributed to the evolutionary history of life on Earth. It is believed that early biochemical processes favored the production of L-amino acids, possibly due to the asymmetry created by certain enzymatic reactions. Over time, this bias toward L-amino acids became dominant in living organisms.

The stereoisomer D-configuration, on the other hand, is less common in naturally occurring amino acids. D-amino acids can be found in certain organisms, such as bacteria, and in special contexts, such as in the cell walls of some bacteria or in peptides produced by non-ribosomal peptide synthesis. However, they are generally rare in proteins found in living systems.

It is important to note that while L-amino acids are predominant in proteins, there are exceptions. For instance, the amino acid glycine lacks a chiral center and is achiral, meaning it does not have a specific L- or D-configuration. Additionally, some non-proteinogenic amino acids, which are not incorporated into proteins, may have different stereochemical configurations.

Overall, the L-configuration is the most commonly observed stereochemical configuration for amino acids in vivo, playing a crucial role in the structure, function, and chemistry of proteins in living organisms.

Learn more about Amino Acid Stereochemistry :

https://brainly.com/question/31588173

#SPJ11

Three solids A, B, and C all have the same melting point of 170-171 C. A 50/50 mixture of A and B melts at 140 – 147 C. A 70/30 mixture of B and C melts at 170-171 C. What conclusions can one draw about the identities of A, B, and C?

Answers

It can be concluded that Solid A has a lower melting point than Solid B and Solid C. Solid B has a higher melting point than both Solid A and Solid C. Solid C has the highest melting point among the three solids.

The melting point of a substance is the temperature at which it changes from a solid to a liquid state. From the information provided, we can deduce the following:

Solid A and Solid B:

When a 50/50 mixture of Solid A and Solid B is formed, it has a lower melting point of 140-147 C. This suggests that Solid A has a lower melting point than Solid B since the mixture's melting point is below the individual melting points of both A and B.

Solid B and Solid C:

When a 70/30 mixture of Solid B and Solid C is formed, it has the same melting point as Solid C, which is 170-171 C. This indicates that Solid B has a higher melting point than Solid C since the mixture's melting point is equal to Solid C's melting point.

Combining these conclusions, we can summarize that Solid A has the lowest melting point, Solid B has a higher melting point than Solid A but lower than Solid C, and Solid C has the highest melting point among the three solids.

To learn more about lower melting point  click here, brainly.com/question/30419586

#SPJ11

16. In a reaction to produce chlorine gas, the theoretical yield is 85. 4 g. What is the percent yield if the actual


yield is 57. 3 g?


A. 149%


B. 52. 8%


C. 67. 1%


D. 84. 1%

Answers

The percent yield of the reaction to produce chlorine gas, given a theoretical yield of 85.4 g and an actual yield of 57.3 g, is 67.1%.

The percent yield is calculated by dividing the actual yield by the theoretical yield and multiplying by 100. In this case, (57.3 g / 85.4 g) × 100 = 67.1%. Percent yield is a measure of how efficiently a reaction proceeds in terms of producing the desired product. It represents the ratio of the actual amount of product obtained (actual yield) to the maximum amount of product that could be obtained under ideal conditions (theoretical yield). In this scenario, the percent yield of 67.1% indicates that the reaction produced about two-thirds of the maximum possible amount of chlorine gas. This suggests that the reaction did not proceed with optimal efficiency, and some factors such as incomplete conversion, side reactions, or loss during purification may have contributed to the lower yield.

Learn more about  chlorine here: https://brainly.com/question/29673349

#SPJ11

calculate the molar solubility of lead (ii) bromide (pbbr2) in pure water. ksp = 4.67×10-6.

Answers

In order to calculate the molar solubility of lead (II) bromide (PbBr2) in pure water, we need to use the solubility product constant (Ksp) which is given as 4.67x10^-6.

The equation for the dissociation of PbBr2 in water is: PbBr2(s) ↔ Pb2+(aq) + 2Br-(aq).

The Ksp expression for this reaction is: Ksp = [Pb2+][Br-]^2.

Since we are given that the water is pure, we can assume that the initial concentrations of Pb2+ and Br- are both zero.

Let x be the molar solubility of PbBr2 in water. Then at equilibrium, the concentrations of Pb2+ and Br- are both equal to x.

4.67x10^-6 = x * (2x)^2.

Simplifying the expression gives: 4.67x10^-6 = 4x^3, x = 0.00309 M.

Therefore, the molar solubility of PbBr2 in pure water is 0.00309 M.

Read more about Molar solubility.

https://brainly.com/question/28170449

#SPJ11

the alpha carbon of all the amino acids is a chirality center except for
Aspartic Acid
Glycine
Arginine
Threonine
Proline

Answers

The alpha carbon of all amino acids is a chirality center except for Glycine. Glycine is unique because its side chain is a hydrogen atom, which makes its alpha carbon achiral. The other amino acids listed (Aspartic Acid, Arginine, Threonine, and Proline) all have chiral alpha carbons.

This means that it has four different groups bonded to it and can exist in two enantiomeric forms (mirror images). Aspartic acid, arginine, threonine, and proline all have a central alpha carbon that is a chirality center, while glycine does not have a chiral center because it has two hydrogen atoms bonded to its alpha carbon.

Thus, the long answer to your question is that the alpha carbon of all amino acids, except glycine, is a chirality center, which allows them to exist in two different forms.

To know more about amino acids visit:-

https://brainly.com/question/30586602

#SPJ11

When an electron in an unknown atom transitions from the n=3 to n=1 energy state, which statement correctly describes how the kinetic energy (KE), and potential energy (PE) of the excited electron changes in response to this transition to the n=1 energy state? KE decreases and PE increases KE decreases and PE decreases KE increases and PE increases KE increases and PE decreases

Answers

When an electron in an unknown atom transitions from the n=3 to n=1 energy state, the correct statement describing the change in kinetic energy (KE) and potential energy (PE) of the excited electron is:

KE increases and PE decreases.

As the electron transitions from a higher energy level (n=3) to a lower energy level (n=1), it moves closer to the nucleus. In the process, the electron loses potential energy because it is now in a more stable, lower energy state. Since potential energy decreases, kinetic energy must increase to conserve the total energy of the electron. Therefore, KE increases and PE decreases during this transition.

Learn more about the electron transition: https://brainly.com/question/29221248

#SPJ11

Identify the most polarizable chemical species in each pair below: a) Korp ܛܝܝ b) Be or Ba c) As or F d) Kor K+ 2.

Answers

The most polarizable chemical species in each pair is the one with the larger atomic size, as larger atoms have electrons that are farther away from the nucleus and are therefore more easily distorted or polarized. Polarizability is an important concept in chemistry, as it can affect the reactivity and chemical properties of a molecule.

a) The most polarizable chemical species in the pair Korp and ܛܝܝ is Korp.

This is because Korp has a larger atomic size compared to ܛܝܝ. As the distance between the valence electrons and the nucleus increases, the attractive force between them decreases, making the electrons easier to distort or polarize.

b) The most polarizable chemical species in the pair Be or Ba is Ba.

This is because Ba has a larger atomic size compared to Be. As the distance between the valence electrons and the nucleus increases, the attractive force between them decreases, making the electrons easier to distort or polarize.

c) The most polarizable chemical species in the pair As or F is As.

This is because As has a larger atomic size compared to F. As the distance between the valence electrons and the nucleus increases, the attractive force between them decreases, making the electrons easier to distort or polarize.

d) The most polarizable chemical species in the pair Kor and K+ is Kor.

This is because Kor has a larger atomic size compared to K+. As the distance between the valence electrons and the nucleus increases, the attractive force between them decreases, making the electrons easier to distort or polarize.

You can learn more about chemical species at: brainly.com/question/31440876

#SPJ11

Classify H2S as a strong acid or weak acid.

Answers

Hydrogen sulfide (chemical formula: H₂S) is classified as a weak acid.

What is a weak acid?

A Weak Acids are the acids that do not completely dissociate into their constituent ions when dissolved in solutions. When dissolved in water, an equilibrium is established between the concentration of the weak acid and its constituent ions.

Some common examples of weak acids are listed below;

Hydrogen sulfide (chemical formula: H₂S) Formic acid (chemical formula: HCOOH)Acetic acid (chemical formula: CH₃COOH)Benzoic acid (chemical formula: C₆H₅COOH)Oxalic acid (chemical formula: C₂H₂O4)Hydrofluoric acid (chemical formula: HF)Nitrous acid (chemical formula: HNO₂)

Learn more about weak acid here: https://brainly.com/question/24018697

#SPJ1

Would you normally expect Delta H° to be positive or negative for a voltaic cell? Justify your answer.A. Many spontaneous reactions (ΔG negative) are exothermic (ΔH positive). Because voltaic cells have spontaneous reactions, you would expect ΔH to be positive for most voltaic cells.B. Many spontaneous reactions (ΔG negative) are endothermic (ΔH positive). Because voltaic cells have spontaneous reactions, you would expect ΔH to be positive for most voltaic cells.C. Many spontaneous reactions (ΔG positive) are endothermic (ΔH negative). Because voltaic cells have spontaneous reactions, you would expect ΔH to be negative for most voltaic cells.D. Many spontaneous reactions (ΔG negative) are exothermic (ΔH negative). Because voltaic cells have spontaneous reactions, you would expect ΔH to be negative for most voltaic cells.

Answers

The answer to this question is D. Many spontaneous reactions (ΔG negative) are exothermic (ΔH negative). Because voltaic cells have spontaneous reactions, you would expect ΔH to be negative for most voltaic cells.

A voltaic cell, also known as a galvanic cell, is an electrochemical cell that generates an electric current through a spontaneous redox reaction. In a voltaic cell, the electrons flow from the anode (the electrode where oxidation occurs) to the cathode (the electrode where reduction occurs), producing a potential difference between the two electrodes.

The spontaneity of the reaction is determined by the Gibbs free energy change (ΔG), which is related to the enthalpy change (ΔH) and entropy change (ΔS) by the equation ΔG = ΔH - TΔS, where T is the temperature in Kelvin.

For a spontaneous reaction, ΔG must be negative. This can occur if either ΔH is negative (exothermic) and/or ΔS is positive (increased disorder). However, for a voltaic cell, the entropy change is typically small or negligible, so the spontaneity is primarily determined by ΔH.

Many spontaneous reactions are exothermic (ΔH negative), meaning they release heat to the surroundings. This is because the products are more stable than the reactants, and the excess energy is released as heat. For a voltaic cell, this excess energy is harnessed to produce an electric current, so you would expect ΔH to be negative for most voltaic cells.

In summary, the spontaneity of a voltaic cell is determined by the Gibbs free energy change, which is related to the enthalpy change and entropy change. For most voltaic cells, the enthalpy change (ΔH) is negative (exothermic) because the excess energy is used to generate an electric current. Therefore, you would expect ΔH to be negative for most voltaic cells.

To know more about voltaic cells, refer

https://brainly.com/question/28302418

#SPJ11

Write a balanced chemical equation for the reaction of aqueous potassium hydroxide with aqueous nickel (ii) chloride to form solid nickel (ii) hydroxide and aqueous potassium chloride.

Answers

The balanced chemical equation for the reaction of aqueous potassium hydroxide with aqueous nickel (II) chloride to form solid nickel (II) hydroxide and aqueous potassium chloride is: 2KOH(aq) + NiCl₂(aq) → Ni(OH)₂(s) + 2KCl(aq)

This equation is balanced with respect to both the reactants and the products. It shows that two moles of aqueous potassium hydroxide (KOH) react with one mole of aqueous nickel (II) chloride (NiCl₂) to yield one mole of solid nickel (II) hydroxide (Ni(OH)₂) and two moles of aqueous potassium chloride (KCl).

In this reaction, the potassium hydroxide (KOH) acts as a base and reacts with the nickel (II) chloride (NiCl₂) which acts as an acid to produce nickel (II) hydroxide (Ni(OH)₂), a solid precipitate, and potassium chloride (KCl), which remains in solution.

The balanced chemical equation provides information about the stoichiometry of the reactants and products involved in the reaction, and it ensures that the law of conservation of mass is satisfied.

learn more about Chemical equation here:

https://brainly.com/question/28294176

#SPJ11

Ceramics have the greatest resistance to breaking under which type of stress? Compressive Tensile Shear What would be the expected crystal structure of a ceramic that is made from barium and chlorine? Fluorite Rock Salt/NaCl Zinc blende O Diamond cubis

Answers

Ceramics have the greatest resistance to breaking under compressive stress. The expected crystal structure of a ceramic made from barium and chlorine would be Rock Salt/NaCl.


Ceramics are known for their great resistance to breaking under compressive stress. This is because ceramics have a strong ionic and covalent bonding structure that allows them to resist compression. When a force is applied to a ceramic material in a compressive manner, the material will tend to collapse inwards, causing the atoms to come closer together. Because the bonds between the atoms are so strong, the material will resist this collapse and remain intact.

In terms of the expected crystal structure of a ceramic made from barium and chlorine, the most likely structure would be the rock salt or NaCl structure. This structure is characterized by a cubic lattice in which the cations and anions alternate in a regular pattern. Barium would act as the cation and chlorine as the anion. This structure is commonly found in many ionic compounds, including ceramics.

To know more about Salt visit :-

https://brainly.com/question/31814919

#SPJ11

Treatment of cobalt(II) oxide with oxygen at high temperatures gives Co3O4. Write a balanced chemical equation for this reaction. What is the oxidation state of cobalt in Co3O4?

Answers

The oxidation state of cobalt in Co3O4 is +8/3. The balanced chemical equation for the reaction of cobalt(II) oxide with oxygen at high temperatures to give Co3O4 is: 2 CoO + O2 → Co3O4

In this reaction, two moles of cobalt(II) oxide react with one mole of oxygen to give one mole of cobalt(III) oxide. Now, let's determine the oxidation state of cobalt in Co3O4. We know that oxygen has an oxidation state of -2. Since the compound is neutral, the sum of the oxidation states of all atoms must be zero. Therefore, we can use this information to solve for the oxidation state of cobalt. Let the oxidation state of cobalt in Co3O4 be x. The formula for Co3O4 tells us that there are three cobalt atoms in the compound. Hence, we can write:

3x + 4(-2) = 0
Solving for x, we get:
3x - 8 = 0
3x = 8
x = 8/3
Therefore, the oxidation state of cobalt in Co3O4 is +8/3.

In summary, the balanced chemical equation for the reaction of cobalt(II) oxide with oxygen at high temperatures to give Co3O4 is 2 CoO + O2 → Co3O4. The oxidation state of cobalt in Co3O4 is +8/3. So, the average oxidation state of cobalt in Co3O4 is +8/3, or approximately +2.67. It's important to note that this is an average value because Co3O4 is a mixed oxide containing both Co(II) and Co(III) oxidation states.

Learn more about oxidation state

https://brainly.com/question/17161178

#SPJ11

classify the bonds as ionic, polar covalent, or nonpolar covalent. n-f se-cl rb-f na-f f-f i-i

Answers

Ionic bonds are formed between a metal and a nonmetal, where one atom loses one or more electrons to another atom that gains those electrons.

Polar covalent bonds are formed between two nonmetals that share electrons unequally, creating partial positive and negative charges. Nonpolar covalent bonds are formed between two nonmetals that share electrons equally, creating no partial charges. Using this information, we can classify the bonds as follows:

N-F: Polar covalent bond

Se-Cl: Polar covalent bond

Rb-F: Ionic bond

Na-F: Ionic bond

F-F: Nonpolar covalent bond

I-I: Nonpolar covalent bond

Note that for N-F and Se-Cl, the electronegativity difference between the atoms is greater than 0.5 but less than 1.7, so the bonds are considered polar covalent. For Rb-F and Na-F, the electronegativity difference is greater than 1.7, so the bonds are considered ionic. For F-F and I-I, the electronegativity difference is zero, so the bonds are considered nonpolar covalent.

For more questions like bonds visit the link below:

https://brainly.com/question/7140445

#SPJ11

determine whether each molecule is an e or z isomer.

Answers

To determine whether each molecule is an E or Z isomer, we can see from the location of the higher priority groups. Which is E isomers having the substituents with higher priority on the opposite sides of the double bond. Z isomers having higher priority on the same side of the double bond.

Giving names E and Z isomer is based on the order of priority of the atoms or groups attached to each carbon of the double bond. If the group or high priority atom is located on one side, it is called Z (Zusammen = together). Conversely, if the high priority groups or atoms are opposite each other, we call it E (Entgegen = opposite). Order of atomic priority, is determined by the atomic number. Atoms with greater atomic number are considered to have higher priority.

Learn more about E and Z isomer:

https://brainly.in/question/9597333

#SPJ11

calculate the ph of solutions containing 200 mg/l of each of the following weak acids or salts of weak acids: a. acetic acid b. hypochlorous acid c. ammonia d. hydrocyanic acid

Answers

The dissociation constant (Ka) or equilibrium constant (Kb) for the acid or base, as well as the concentration of the acid or base in solution, must be known in order to compute the pH of solutions containing weak acids or salts of weak acids.

a. Acetic acid (CH3COOH) has a Ka of 1.8 x 10-5, making it a weak acid. We must translate the concentration to moles per litre (mol/L) in order to calculate the pH of a solution containing 200 mg/L of acetic acid.

200 mg/L is equivalent to 0.2 g/L, 0.2/60 g/mol, or 0.00333 mol/L.

The concentration of H+ ions in solution may now be determined using the equation for the dissociation of acetic acid:

H2O + CH3COOH H3O+ + CH3COO-

Ka is equal to [CH3COO-][H3O+]/[CH3COOH].

Given that the acid is weak, [CH3COO-] = [H3O+] and [CH3COOH] - [CH3COO-], we can write:

Ka is equal to [H3O+]2 / [CH3COOH - [H3O+]].

If you rewrite this equation, you get:

(Ka*[CH3COOH - [H3O+]]) = [H3O+]

Inputting the values, we obtain:

[H3O+] = 0.00135 mol/L (1.8 x 10-5 * 0.00333 mol/L)

pH = -log(0.00135)/-log(-log[H3O+] = 2.87

As a result, a solution with 200 mg/L of acetic acid has a pH of roughly 2.87.

b. Hypochlorous acid (HOCl), which has a Ka of 3.5 x 10-8, is a weak acid. We must convert the concentration to moles per litre (mol/L) in order to determine the pH of a solution containing 200 mg/L of HOCl.

200 mg/L is equal to 0.2 g/L, or 0.2/52.46 g/mol, or 0.00381 mol/L.

The concentration of H+ ions in solution can now be determined using the equation for the dissociation of hypochlorous acid:

OCl- + H3O+ = HOCl + H2O

Ka is equal to [OCl-][H3O+]/[HOCl].

Given that the acid is weak, [OCl-] = [H3O+] and [HOCl] - [OCl-], we can write:

Ka = [HOCl - [H3O+]] / [H3O+]2.

If you rewrite this equation, you get:

(Ka*[HOCl - [H3O+]]) = [H3O+]

Inputting the values, we obtain:

[H3O+] is equal to (3.5 x 10-8 * 0.00381 mol/L) = 6.12 x 10-5 mol/L.

pH = -log[H3O+] = -log(6.12 x 10-5), which equals 4.21.

As a result, a solution with 200 mg/L of hypochlorous acid has a pH of roughly 4.21.

c. Ammonia (NH3) has a Kb of 1.8 x 10-5 and is a weak base. In order to get the pH of a solution with 200 mg/L of ammonia, we must convert

For more such question on pH

https://brainly.com/question/31380289

#SPJ11

A solution with 200 mg/L of hypochlorous acid has a pH of roughly 4.21. c. Ammonia (NH3) has a Kb of 1.8 x 10-5 and is a weak base. In order to get the pH of a solution with 200 mg/L of ammonia, we must convert

The dissociation constant (Ka) or equilibrium constant (Kb) for the acid or base, as well as the concentration of the acid or base in solution, must be known in order to compute the pH of solutions containing weak acids or salts of weak acids. a. Acetic acid (CH3COOH) has a Ka of 1.8 x 10-5, making it a weak acid. We must translate the concentration to moles per litre (mol/L) in order to calculate the pH of a solution containing 200 mg/L of acetic acid.

200 mg/L is equivalent to 0.2 g/L, 0.2/60 g/mol, or 0.00333 mol/L.

The concentration of H+ ions in solution may now be determined using the equation for the dissociation of acetic acid:

H2O + CH3COOH H3O+ + CH3COO-

Ka is equal to [CH3COO-][H3O+]/[CH3COOH].

Given that the acid is weak, [CH3COO-] = [H3O+] and [CH3COOH] - [CH3COO-], we can write:

Ka is equal to [H3O+]2 / [CH3COOH - [H3O+]].

If you rewrite this equation, you get:

(Ka*[CH3COOH - [H3O+]]) = [H3O+]

Inputting the values, we obtain:

[H3O+] = 0.00135 mol/L (1.8 x 10-5 * 0.00333 mol/L)

pH = -log(0.00135)/-log(-log[H3O+] = 2.87

As a result, a solution with 200 mg/L of acetic acid has a pH of roughly 2.87.

b. Hypochlorous acid (HOCl), which has a Ka of 3.5 x 10-8, is a weak acid. We must convert the concentration to moles per litre (mol/L) in order to determine the pH of a solution containing 200 mg/L of HOCl.

200 mg/L is equal to 0.2 g/L, or 0.2/52.46 g/mol, or 0.00381 mol/L.

The concentration of H+ ions in solution can now be determined using the equation for the dissociation of hypochlorous acid:

OCl- + H3O+ = HOCl + H2O

Ka is equal to [OCl-][H3O+]/[HOCl].

Given that the acid is weak, [OCl-] = [H3O+] and [HOCl] - [OCl-], we can write: Ka = [HOCl - [H3O+]] / [H3O+]2.

If you rewrite this equation, you get:

(Ka*[HOCl - [H3O+]]) = [H3O+]

Inputting the values, we obtain:

[H3O+] is equal to (3.5 x 10-8 * 0.00381 mol/L) = 6.12 x 10-5 mol/L.

pH = -log[H3O+] = -log(6.12 x 10-5), which equals 4.21.

Learn more about  pH here:

brainly.com/question/31380289

#SPJ11

An alternating current complete 100 cycles in 0. 1s. It's frequency is​

Answers

The frequency of an alternating current that completes 100 cycles in 0.1s can be calculated by dividing the number of cycles by the time taken. The frequency of the alternating current is 1000 Hz.

Frequency is a measure of how many cycles of a periodic waveform occur per unit of time. In this case, we are given that the alternating current completes 100 cycles in 0.1s. To calculate the frequency, we divide the number of cycles by the time taken.

Frequency (f) = Number of cycles / Time

Given:

Number of cycles = 100

Time = 0.1s

Substituting the values into the formula, we have:

Frequency = 100 cycles / 0.1s

Simplifying the calculation, we find:

Frequency = 1000 Hz

Therefore, the frequency of the alternating current that completes 100 cycles in 0.1s is 1000 Hz. This means that the alternating current oscillates back and forth 1000 times per second.

Learn more about alternating current here:

https://brainly.com/question/31609186

#SPJ11

Lewis Structures and Formal Charge 1) Three possible Lewis structures for the thiocyanate ion, NCS, are given below: [—c=s] (n=c=s] (n=c-s)" a) Complete each structure by adding the lone pair electrons. b) Determine the formal charges of the atoms in each structure. Formal charge can be used to distinguish between competing structures. In general, the following rules apply: i) The sum of all formal charges in a neutral molecule must be zero. ii) The sum of all formal charges in an ion must equal the charge on the ion. iii) Small or zero formal charges on individual atoms are better than larger ones. iv) When formal charge cannot be avoided on an atom, negative charges are better on more electronegative atoms. c) Decide which Lewis structure is the preferred one and give an explanation below

Answers

The preferred Lewis structure for the thiocyanate ion (NCS-) is [tex][C≡N-S]⁻[/tex].

The Lewis structures and formal charges for the thiocyanate ion[tex](NCS-)[/tex]. Here are the steps:

a) Adding lone pair electrons to each structure:

1. [tex][C≡N-S]⁻: C[/tex] has 2 lone pairs, N has 1 lone pair, and S has 2 lone pairs.
2. [tex][N=C=S]⁻: N[/tex] has 2 lone pairs, C has 3 lone pairs, and S has 2 lone pairs.
3. [tex][N-C≡S]⁻: N[/tex]has 3 lone pairs, C has 2 lone pairs, and S has 1 lone pair.

b) Determining the formal charges:

1. [tex][C≡N-S]⁻: C: 0, N: 0, S: -1[/tex]
2.[tex][N=C=S]⁻: N: -1, C: 0, S: 0[/tex]
3.[tex][N-C≡S]⁻: N: -1, C: 0, S: 0[/tex]

c) Deciding the preferred Lewis structure:

Considering the rules, Structure 1 is preferred because:
i) The sum of all formal charges equals -1, which is the charge on the ion.
ii) It has smaller or zero formal charges on individual atoms.
iii) The negative charge is on the more electronegative atom (Sulfur).

So, the preferred Lewis structure for the thiocyanate ion[tex](NCS-) is [C≡N-S]⁻.[/tex]

To learn more about atom, refer below:

https://brainly.com/question/30898688

#SPJ11

The solubility of Cu(OH)2 (s) is 1.92 x 10 –6 gram per 100. milliliters of solution at 30°C.-Calculate the solubility (in moles per liter) of Cu(OH)2 at 30°C.-Calculate the value of the solubility product constant, Ksp, for Cu(OH)2 at 30°C.

Answers

The solubility of Cu(OH)2 at 30°C is 1.02 x 10^-19 moles per liter. The value of the solubility product constant, Ksp, for Cu(OH)2 at 30°C is 1.2 x 10^-20.

To calculate the solubility of Cu(OH)2 (s) in moles per liter at 30°C, we first need to convert the given solubility in grams per 100 milliliters to moles per liter. We can do this by using the molar mass of Cu(OH)2, which is 97.56 g/mol.

Solubility of Cu(OH)2 (s) = 1.92 x 10^-6 g/100 ml = 1.92 x 10^-5 g/L

Moles of Cu(OH)2 = 1.92 x 10^-5 g / 97.56 g/mol = 1.97 x 10^-7 mol/L

Therefore, the solubility of Cu(OH)2 in moles per liter at 30°C is 1.97 x 10^-7 mol/L, or 1.02 x 10^-19 moles per liter.

The solubility product constant, Ksp, can be calculated using the solubility of Cu(OH)2 in moles per liter:

Cu(OH)2 (s) ⇌ Cu2+ (aq) + 2OH- (aq)

Ksp = [Cu2+][OH-]^2

Since Cu(OH)2 dissociates into 1 Cu2+ ion and 2 OH- ions, we can substitute the solubility of Cu(OH)2 into the Ksp expression:

Ksp = (1.97 x 10^-7) x (2 x 1.97 x 10^-7)^2 = 1.2 x 10^-20

Therefore, the value of the solubility product constant, Ksp, for Cu(OH)2 at 30°C is 1.2 x 10^-20.

learn more about solubility here:

https://brainly.com/question/28170449

#SPJ11

If you found two substances with the exact same properties what would that tell you?

Answers

If two substances have exactly the same properties, it indicates that they are the same substance.

This could mean that they have the same chemical composition, molecular structure, and physical characteristics. However, it is important to note that some properties may not be enough to identify a substance uniquely, and further testing may be necessary to confirm their identity.

For example, two white powders may look the same, but one could be salt (sodium chloride) and the other could be sugar (sucrose). Both are white and crystalline, but their chemical properties are different. Therefore, testing such as chemical reactions, melting points, or other analytical techniques may be needed to distinguish them. In conclusion, finding two substances with the exact same properties could indicate that they are the same substance, but further testing may be required for confirmation.

To know more about the Substances, here

https://brainly.com/question/25849631

#SPJ1

Liquid mercury has a density of 13.690g/cm^3, and solid mercury has a density of 14.193 g/cm^3, both being measured at the melting point, -38.87 'C, at 1bar pressure. The heat of fusion is 9.75 J/g. Calculate the melting points of mercury under a pressure of (a) 10bar and (b) 3540 bar. the observed melting point under 3540 bar is -19.9'C

Answers

a) The melting point of mercury at 10 bar is -118.8°C.

b) The melting point of mercury at 3540 bar is -49.5°C

The melting point of mercury at different pressures can be calculated using the Clausius-Clapeyron equation:

ln(P2/P1) = -ΔHfus/R (1/T2 - 1/T1)

where P1 and T1 are the pressure and temperature at which the heat of fusion is known (1 bar and -38.87°C, respectively), P2 is the new pressure, T2 is the new melting point temperature, ΔHfus is the heat of fusion, R is the gas constant, and ln is the natural logarithm.

We can rearrange this equation to solve for T2:

T2 = (ΔHfus/R) * (ln(P2/P1)/(-1/T1)) + 1/T1

Substituting the given values, we get:

(a) For P2 = 10 bar:

T2 = (9.75 J/g / (8.314 J/(mol*K))) * (ln(10 bar/1 bar) / (-1 / ( -38.87°C + 273.15))) + (1 / (-38.87°C + 273.15))

T2 = 155.3 K = -118.8°C

Therefore, the melting point of mercury at 10 bar is -118.8°C.

(b) For P2 = 3540 bar:

T2 = (9.75 J/g / (8.314 J/(mol*K))) * (ln(3540 bar/1 bar) / (-1 / ( -38.87°C + 273.15))) + (1 / (-38.87°C + 273.15))

T2 = 223.6 K = -49.5°C

Learn more about The Clausius-Clapeyron: https://brainly.com/question/13162576

#SPJ11

The normal boiling point of ethanol is 78.4 C, and the heat of vaporization is Delta H vap = 38.6 kJ / mol.
What is the boiling point of ethanol in C on top of Mt. Everest, where P = 260 mmHg.

Answers

The boiling point of ethanol on top of Mt. Everest, where the pressure is 260 mmHg, is approximately 68.5°C.

At higher altitudes, the atmospheric pressure is lower, and therefore the boiling point of liquids decreases. This is because the lower pressure reduces the vapor pressure required for boiling to occur. To calculate the boiling point of ethanol at 260 mmHg, we can use the Clausius-Clapeyron equation, which relates the vapor pressure of a substance to its temperature and heat of vaporization. By plugging in the given values for the normal boiling point, heat of vaporization, and pressure on Mt. Everest, we can solve for the new boiling point. Learn more about the Clausius-Clapeyron equation and its applications at #SPJ11.

learn more about heat of vaporization

https://brainly.com/question/13372553

#SPJ11

through a balanced equation of combustion, calculate the oxygen balance of ammonium nitrate

Answers

To determine the oxygen balance of ammonium nitrate through a balanced equation of combustion is  33.33%

Ammonium nitrate (NH4NO3) is an oxidizer commonly used in fertilizers and explosives. Its combustion reaction can be represented by a balanced chemical equation. To determine the oxygen balance, we first need to write the balanced equation for the combustion of ammonium nitrate.

The balanced equation for the decomposition of ammonium nitrate is:

NH4NO3 (s) → N2O (g) + 2H2O (g)

Now, we can calculate the oxygen balance. Oxygen balance is the difference between the oxygen content in the reactants and products, expressed as a percentage of the total oxygen content in the reactants. The formula for oxygen balance is:

Oxygen Balance = [(Oxygen in Products - Oxygen in Reactants) / Oxygen in Reactants] × 100%

In our equation, the oxygen content in the reactants (ammonium nitrate) is 3 moles, while in the products (N2O and 2H2O), the total oxygen content is 2 + (2 × 1) = 4 moles.

Now we can apply the formula:

Oxygen Balance = [(4 - 3) / 3] × 100% = (1 / 3) × 100% ≈ 33.33%

So, the oxygen balance of ammonium nitrate in its combustion reaction is approximately 33.33%. This means that during the decomposition, there is a surplus of oxygen available in the products, which is a characteristic of an effective oxidizer.

Know more about Ammonium Nitrate here:

https://brainly.com/question/29341539

#SPJ11

Consider a binary liquid mixture for which the excess gibbs energy is given by G^E /RT = Ax1x2(x1 + 2x2). What is the minimum value of A for which liquid/liquid equilibrium is possible

Answers

The minimum value of A for which liquid/liquid equilibrium is possible is 1/4.

What is the value of A required for the occurrence of liquid/liquid equilibrium in a binary liquid mixture?

Liquid/liquid equilibrium occurs when the chemical potential of each component is equal in both liquid phases. In order for this to happen, the excess Gibbs energy ([tex]G^E[/tex]) of the mixture must be negative. The equation [tex]G^E[/tex] /RT = Ax1x2(x1 + 2x2) tells us that the excess Gibbs energy depends on the composition of the mixture, represented by the mole fractions x1 and x2, and the constant A.

In order for [tex]G^E[/tex] to be negative, A must be greater than zero. However, A cannot be arbitrarily large, as this would result in a divergence of [tex]G^E[/tex]. By setting the first derivative of [tex]G^E[/tex] with respect to x1 equal to zero and solving for A, we find that the minimum value of A for which liquid/liquid equilibrium is possible is 1/4.

Learn more about Gibbs energy

brainly.com/question/9179942

#SPJ11

Calculate the normal boiling point of liquid Q if the vapor pressure is .500 atm at 20 degrees C. The change/ delta of H of vaporization for liquid Q is 26 kJ/ mole. Do you except liquid Q to have H bonds?

Answers

The normal boiling point of liquid Q is 136.3 degrees C.

Liquid Q is expected to have H bonds because of the high boiling point

What is the normal boiling point of Liquid Q?

The normal boiling point of liquid Q can be calculated using the Clausius-Clapeyron equation given below:

[tex]ln(P_2/P_1) = -\Delta H_{vap}/R * (1/T_2 - 1/T_1)[/tex]

where

P1 and T1 are the initial vapor pressure and temperature, P2 is the vapor pressure at the boiling point (1 atm),T2 is the boiling point (in Kelvin), ΔHvap is the enthalpy of vaporization,R is the gas constant (8.314 J/(mol*K)).

T1 = 20 °C in Kelvin will be:

T1 = 20 + 273.15

T1 = 293.15 K

Substituting the given values and solving for T2:

ln(1/.500) = -2610³ J/mol / (8.314 J/(molK)) * (1/T2 - 1/293.15 K)

ln(2) = -3132.6 * (1/T2 - 1/293.15)

1/T2 - 1/293.15 = -ln(2) / 3132.6

1/T2 = 1/293.15 - ln(2) / 3132.6

T2 = 409.4 K

Normal boiling point = (409.4 - 273.15)

Normal boiling point = 136.3 °C.

Learn more about the normal boiling point at: https://brainly.com/question/13130654

#SPJ1

Give the major organic product of each reaction of methyl pentanoate with the given 6 reagents under the conditions shown. Do not draw any byproducts formed.
−→−−−−−Reagent→Reagent Product
a. Reaction with NaOH,H2ONaOH,H2O, heat; then H+,H2OH+,H2O.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO
b. Reaction with (CH3)2CHCH2CH2OH(CH3)2CHCH2CH2OH (excess), H+H+.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO
c. Reaction with (CH3CH2)2NH(CH3CH2)2NH and heat.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHNO
d. Reaction with CH3MgICH3MgI (excess), ether; then H+/H2OH+/H2O.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO
e. Reaction with LiAlH4LiAlH4, ether; then H+/H2OH+/H2O.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO
f. Reaction with DIBAL (diisobutylaluminum hydride), toluene, low temperature; then H+/H2OH+/H2O.
SelectDrawRingsMoreEraseSelectDrawRingsMoreEraseSelectDrawRingsMoreErase
CHO

Answers

The major organic product for this reaction sequence is pentanoic acid.

a. NaOH, H₂O, heat; then H⁺, H₂O:

The reaction with NaOH and heat will result in the saponification of methyl pentanoate to form sodium pentanoate and methanol. The sodium pentanoate will then be protonated with H+ and form the corresponding pentanoic acid.

The major organic product for this reaction sequence is pentanoic acid.

b. (CH₃)₂CHCH₂CH₂OH (excess), H+:

The reaction with (CH₃)₂CHCH₂CH₂OH and H+ is an example of an esterification reaction, which will result in the formation of an ester product.

The major organic product for this reaction is isopentyl pentanoate.

c. (CH₃CH₂)₂NH, heat:

The reaction with (CH₃CH₂)₂NH and heat is an example of an amide formation reaction, which will result in the formation of an amide product.

The major organic product for this reaction is N,N-diethylpentanamide.

d. Reaction with CH₃MgI(excess), ether; then H+/H₂O:

The reaction with CH₃MgI and excess will result in the formation of a Grignard reagent which will act as a nucleophile and attack the carbonyl group of methyl pentanoate to form a new carbon-carbon bond. The resulting product will have an alcohol functional group.

The major organic product for this reaction sequence is 3-hydroxypentanoic acid.

e. Reaction with LiAlH₄, ether; then H+/H₂O:

The reaction with LiAlH₄ is a reduction reaction, which will reduce the carbonyl group of methyl pentanoate to an alcohol group. The resulting product will have a primary alcohol functional group.

The major organic product for this reaction sequence is 3-pentanol.

f. Reaction with DIBAL (diisobutylaluminum hydride), toluene, low temperature; then H+/H₂O:

The reaction with DIBAL is a reduction reaction, which will reduce the ester group of methyl pentanoate to an aldehyde group. The aldehyde group can then be further reduced to an alcohol group with H+/H₂O.

The major organic product for this reaction sequence is 3-pentanol.

The Correct Question is:

Give the major organic product of each reaction of methyl pentanoate with the following reagents under the conditions shown. Do not draw any byproducts formed.

a. NaOH, H₂O, heat; then H+, H₂O

b. (CH₃)₂CHCH₂CH₂OH (excess), H+

c. (CH₃CH₂)₂NH, heat

d. Reaction with CH₃MgI(excess), ether; then H+/H₂O

e. Reaction with LiAlH₄, ether; then H+/H₂O

f. Reaction with DIBAL (diisobutylaluminum hydride), toluene, low temperature; then H+/H₂O

To know more about pentanoic acid follow the link:

https://brainly.com/question/16945257

#SPJ4

unknown m melts at 112°c. known compounds 3-nitroaniline and 4-nitrophenol both melt at 112-114°c. if a is mixed with 4-nitrophenol and the melting point of the mixture is 93-100°c, identify m.

Answers

The melting point of a known compound of 3-Nitroaniline decreases and becomes board when it reacts with both 3-Nitroaniline and 4-Nitrophenol.

The melting point of the combination disperses and it takes on a wide form whenever we combine any pure type of a compound with another form of a compound that is not within the same standard pure condition.  As a result, the melting point of a known compound of 3-Nitroaniline decreases and becomes board when it reacts with both 3-Nitroaniline and 4-Nitrophenol.

To know more about melting point, here:

https://brainly.com/question/20551307

#SPJ1

Which of the following is not a common solvent used for acquiring a 'H NMR spectrum? CDCl_3 CCl_4 CH_3 OH CH_3 OH D_2

Answers

In nuclear magnetic resonance (NMR) spectroscopy, different solvents are used to dissolve and analyze compounds.  [tex]CH_{3} OH[/tex] (methanol) is not a common solvent used for acquiring an 'H NMR spectrum.

In nuclear magnetic resonance (NMR) spectroscopy, different solvents are used to dissolve and analyze compounds. Common solvents for acquiring 'H NMR spectra include [tex]CDCl_{3}[/tex](deuterated chloroform), CCl4 (carbon tetrachloride), and [tex]D_{2} O[/tex] (deuterated water). However, [tex]CH_{3} OH[/tex] (methanol) is not typically used as a solvent for acquiring 'H NMR spectra.

The choice of solvent in NMR spectroscopy is crucial because it can affect the chemical shift values and the quality of the spectrum. Solvents like [tex]CDCl_{3}[/tex], [tex]CCl_{4}[/tex], and[tex]D_{2} O[/tex] are commonly used because they are deuterated, meaning that they contain isotopes of hydrogen (deuterium) that do not produce signals in the 'H NMR spectrum. This allows for a clear interpretation of the signals from the compound of interest.

On the other hand,[tex]CH_{3} OH[/tex] (methanol) is not deuterated and contains protons that would contribute to the 'H NMR spectrum. Its use as a solvent could lead to overlapping signals and interfere with the analysis of the compound being studied, which is why it is not commonly used for acquiring 'H NMR spectra.

Learn more about 'H NMR spectra here:

https://brainly.com/question/9784910

#SPJ11

tow the line, inc. provides contracts with its clients that are presented on a "take-it-or-leave-it" basis. courts typically find these types of agreements to be _____.

Answers

Courts typically find "take-it-or-leave-it" agreements to be adhesion contracts.

Adhesion contracts are contracts that are drafted by one party with superior bargaining power, leaving the other party with no real opportunity to negotiate the terms. These contracts are often presented on a "take-it-or-leave-it" basis, meaning the accepting party must either agree to the terms as they are or decline the contract altogether. Courts recognize the inherent power imbalance in such agreements and generally scrutinize them more closely. The term "adhesion" refers to the idea that one party adheres to the terms set forth by the other party without having the ability to negotiate or modify them. This can occur in various contexts, including consumer contracts, employment agreements, and insurance policies. Courts tend to view adhesion contracts with caution, as they may contain terms that are unfairly one-sided and disadvantageous to the party with less bargaining power. In legal proceedings, courts may apply principles of contract law to determine the enforceability and validity of adhesion contracts. They may consider factors such as the clarity of the terms, the conspicuousness of any limitations or disclaimers, and the overall fairness of the agreement. If a court determines that the contract was unconscionable or contained unfair provisions, it may limit or invalidate certain terms to protect the rights of the accepting party.

Learn more about adhesion contract here:

https://brainly.com/question/30900071

#SPJ11

the reaction of 4-pentanoylbiphenyl and hydrazine without potassium hydroxide is a net? a. substitution b. addition c. rearrangement d. elimination

Answers

The reaction of 4-pentanoylbiphenyl and hydrazine without potassium hydroxide is a net addition reaction. The correct option is b.

When 4-pentanoylbiphenyl reacts with hydrazine in the absence of potassium hydroxide, the carbonyl group of the 4-pentanoylbiphenyl undergoes addition reaction with hydrazine to form a hydrazone product. This is an example of a net addition reaction, where two molecules combine to form a single product.

The reaction does not involve the substitution of any functional groups, rearrangement of atoms or elimination of any functional group. The absence of potassium hydroxide in the reaction mixture does not influence the mechanism of the reaction but rather affects the rate of reaction. Potassium hydroxide is often used as a catalyst in the reaction to increase the rate of the reaction. Therefore, the correct option is b.

To know more about catalyst refer here:

https://brainly.com/question/31630881#

#SPJ11

what is the coordination number around the central metal atom in dichlorobis(ethylenediamine)platinum(iv) chloride ([pt(en)₂(cl)₂]cl₂, en = h₂nch₂ch₂nh₂)?

Answers

The coordination number around the central metal atom in dichlorobis(ethylenediamine)platinum(iv) chloride ([Pt(en)₂(Cl)₂]Cl₂, en = H₂NCH₂CH₂NH₂) is 6.

This is because there are two ethylenediamine (en) ligands and two chloride (Cl) ligands, each of which has two electron pairs to donate to the coordination sphere of the platinum (Pt) central metal atom. Therefore, the total number of ligands bound to the central metal atom is 6, giving a coordination number of 6.

We can find the coordination number of compounds by:
1. Identify the central metal atom: In this complex, the central metal atom is platinum (Pt).
2. Count the ligands attached to the central metal atom: There are two ethylenediamine (en) ligands and two chloride (Cl) ligands.
3. Determine the coordination number: Each ethylenediamine (en) ligand has two donor atoms (N), while each chloride (Cl) ligand has one donor atom. So, the total number of donor atoms is (2 x 2) + (2 x 1) = 6.

Therefore, the coordination number around the central metal atom (platinum) in dichlorobis(ethylenediamine)platinum(IV) chloride is 6.

For more questions on coordination numbers: https://brainly.com/question/12498196

#SPJ11

Other Questions
41) Music lovers felt that the gramophone is a boonbecause they couldA) be a part of the new civilization. B) listen to good music. C) popularise famous music. D) learn their favorite numbers. sodium carbonate and zinc sulfate express your answer as an ion. if there is more than one answer, separate each by using a comma. all of the following are ways domesticated plants differ from their wild ancestors except Select the statement that best describes the a mainframe computer.-It enabled users to organize information through word processing and database programs from their desktop.-It enabled people to connect to a central server and share data with friends, business partners, and collaborators.-It could run programs and store data on a single silicon chip, which increased computing speeds and efficiency-It enabled corporations and universities to store enormous amounts of data, sometimes on devices which occupied an entire room. Problem 6. 2 3 (12 points) Let y = -2 and u = 2 2 1 (a) Find the orthogonal projection of y onto u. proj.y = (b) Compute the distance d from y to the line through u and the origin. d= Note: You can earn partial credit on this problem. when warren and warren presented people with a sentence in which a sound was replaced by a cough, such as the eel was on the axle people a deeply held positive or negaative feeling associated with a particular group is You are the senior accountant in the audit of Granger Grain Corporation, whose business primarily involves the purchase, storage, and sale of grain products. The corporation owns several elevators located along navigable water routes and transports its grain by barge and rail. Your staff assistant submitted the following working paper analysis for your review: Review the analysis and answer questions a. b. and c. below.GRANGER GRAIN CORPORATIONAdvances Paid on Barges Under Constructiona/c 210 December 31, 20X1Advances made:1/15/X1Ck. No. 3463Jones Barge Construction Co. 100,000*4/13/X1Ck. No. 4129Jones Barge Construction Co. 25,000*6/19/X1Ck. No. 5396Jones Barge Construction Co. 63,000*Total payments188,000Deduct cash received 9/1/X1 from City Life Insurance Co.188,000Balance per general ledger12/31/X1$ 0* Traced to cash receipts journal and to duplicate deposit ticket. Examined approved check request and paid check and traced to cash disbursements journal.a. In what respects is this brief analysis incomplete for audit purposes? (Do not include any discussion of specific auditing procedures.)b. What two different types of contractual arrangements may be inferred from your assistants analysis?c. What additional auditing procedures would you suggest that your staff assistant perform before you accept the working paper as being complete? The process of peacefully reconciling social and economic differences and allocating resources is called __ Which fallacy does the following statement or argument commit: ""I hear that Walter is handling some hot stocks right now. The new asbestos gloves I bought protect your hands from hot objects. I should give them to Walter for protection.""(a) Begging the question (b) False dichotomy (c) Equivocation (d) Fallacy of Composition(e) Fallacy of composition rock or sediment between the water table and the land surface represents a(n) If an economy is producing beyond its full employment output, nominal wages will start to increase, which causes the short-run aggregate supply curve to ______.A. stay where it isB. shift rightC. normal goodsD. shift left After Noel and Elena deposited nearly $55.000 in a savings account at Bigbux Bank, the bank failed and tiled for bankruptcy. Because the Bigbux was an FDIC member bank. Noel and Elena Multiple Choice a.wil beible 15 recover 80 percent of the value of their depon, $2,500 deductible b.should be protected because their account is fully insured by the FDIC c.willote their savings because the FDIC only insures business deposite d.can recover up to $25,000, but they will probably lose the test since the deposits exceed the maximum coverage offered by the FDIC We wish to move backwards in the input file by the length of a (struct data) data structure. Complete the following lseek() invocation to do so:lseek(fd,_____________________ ,___________________ ); which theory refers to the transformation of a society from a rural to an urban one? given a 100 pound person breathing at a rate of 12 breaths/minute with a tidal volume of 300 ml/breath, what is the alveolar ventilation? the belief that the soul continues to exist among the living after death is referred to as a. polytheism. b. monotheism. c. ancestral spirits. d. animism. If n is a term of the sequence 14, 8, 2, -4, , which expression would you give the value of n?3 n + 11-6 n + 20-4 n + 18-6 n + 14 why doe oxxygenated blood reach muscles and organs more rapidly in an amphibilan than it does in a fish the process of the media curating the different perspectives of the government and policy and providing the public with that information is called: