X
Incorrect
1 try left. Try once more
A certain state legislature has senators and representatives. The combined nu
the numbers is 150. There are more representatives than senators.
How many senators and how many representatives are in this state's legislatu
Number of senators: 130
Number of representatives: 150
G
Need help with this question?
X
Ś ?

Answers

Answer 1

(150 + x) + 130 >= 150 is the inequality equation for the state legislature, which consists of senators and members.

what is inequality ?

Mathematics uses the term inequality to describe a link between two expressions or values that is not equal. Thus, imbalance is the cause of inequality. The relationship between two non-equal values in mathematics is established by an inequality. Egality and inequality are not synonymous. Whenever two values are not equal, use the not equal sign (). Various inequalities are used to compare values, whether they are small or large. You can eliminate a lot of simple inequalities by modifying both sides until only the variables are left. Inequality is brought on by a number of things, though: On both sides, subtract or multiply negative values. Alternate between left and right.

given

Number of senators: 130

Number of representatives: 150

more representatives than senators

(150 + x) + 130 >= 150 is the inequality equation for the state legislature, which consists of senators and members.

To know more about inequality visit:

https://brainly.com/question/29914203

#SPJ1


Related Questions

A rental car agency charges $190.00 per week plus $0.15 per mile to rent a car. How many miles can you travel in one week for $266.50

Answers

Answer:

510 miles

Step-by-step explanation:

Let 'm' be the miles traveled.

    To find the charge for 'm' miles, multiply m by rate per mile.

Charge for 'm' miles = 0.15*m = 0.15m

If we add the fixed charge per week with the charge for 'm' miles, we will get the total charge.

                       Total charge = Fixed charge + charge for m miles

                                              = 190 + 0.15m

190 + 0.15m = 266.50

Subtract 190 from both sides,

          0.15m = 266.50 - 190

         0.15m  =  76.50

Divide both sides by 0.15,

                [tex]m =\dfrac{76.50}{0.15}\\\\\\m=\dfrac{7650}{15}\\\\\\m = 510 \ miles[/tex]

Refer to Muscle mass Problems 1.27 and 8.4. a. Obtain the residuals from the fit in 8.4a and plot them against Yˆ and against x on separate graphs. Also prepare a normal probability plot. Interpret your plots. b. Test formally for lack of fit of the quadratic regression function; use α = .05. State the alternatives, decision rule, and conclusion. What assumptions did you make implicitly in this test? 336 Part Two Multiple Linear Regression c. Fit third-order model (8.6) and test whether or notβ111 = 0; useα = .05. State the alternatives, decision rule, and conclusion. Is your conclusion consistent with your finding in part (b)?

Answers

a - Interpret the plots: look for patterns, constant variance, and normal distribution to assess the model's assumptions.

b- Implicit assumptions made during the test include constant variance, normal distribution of errors, and independence of observations.

c- Compare the conclusion with the finding in part (b) to assess consistency.

Using the mentioned terms. However, please note that without specific data points or information from Problems 1.27 and 8.4, I cannot provide an exact answer or numerical calculations.

a. Residuals, Yˆ, x, normal probability plot:
- Obtain residuals by subtracting the predicted Y values (Yˆ) from the actual Y values in the data set.
- Plot residuals against Yˆ and x on two separate graphs.
- Prepare a normal probability plot using the residuals.
- Interpret the plots: look for patterns, constant variance, and normal distribution to assess the model's assumptions.

b. Lack of fit, quadratic regression, α = .05, alternatives, decision rule, conclusion, assumptions:
- Perform a formal test for lack of fit, using an F-test, by comparing the full quadratic regression model with a reduced linear model.
- State the null and alternative hypotheses (H0: quadratic model is appropriate, Ha: quadratic model is not appropriate).
- Determine the decision rule: if F > critical F-value (based on α = .05 and appropriate degrees of freedom), reject H0.
- Draw a conclusion based on the F-test result.
- Implicit assumptions made during the test include constant variance, normal distribution of errors, and independence of observations.

c. Third-order model, β111, α = .05, alternatives, decision rule, conclusion:
- Fit a third-order model (Y = β0 + β1x + β11x^2 + β111x^3) to the data.
- Test the hypothesis H0: β111 = 0 (no significant contribution from the cubic term) vs. Ha: β111 ≠ 0 (cubic term is significant).
- Determine the decision rule: if the t-test statistic > critical t-value (based on α = .05 and appropriate degrees of freedom), reject H0.
- Draw a conclusion based on the t-test result.
- Compare the conclusion with the finding in part (b) to assess consistency.

learn more about normal distribution

https://brainly.com/question/29509087

#SPJ11

Blaine and Lindsay McDonald have total assets valued at $346,000 and total debt of $168,000. What is Blaine and Lindsay's asset-to-debt ratio? a-0.49 b. 0.51 c.2.06 d.1.00

Answers

The correct answer is option (c) 2.06.  For every dollar of debt, Blaine and Lindsay have approximately $2.06 in assets

The asset-to-debt ratio for Blaine and Lindsay McDonald can be calculated by dividing their total assets by their total debt. Using the given values, the calculation would be as follows:

Asset-to-debt ratio = Total assets / Total debt

                   = $346,000 / $168,000

The asset-to-debt ratio is a financial metric that provides insight into the financial health and leverage of an individual, company, or entity. It measures the proportion of assets to debt and is used to assess the ability to meet financial obligations and the level of risk associated with the amount of debt.

In this case, Blaine and Lindsay McDonald have total assets valued at $346,000 and total debt of $168,000. By dividing the total assets by the total debt, we obtain the asset-to-debt ratio of approximately 2.06. This means that for every dollar of debt, Blaine and Lindsay have approximately $2.06 in assets. A higher asset-to-debt ratio generally indicates a stronger financial position and lower risk, as there are more assets available to cover the debt obligations.

Learn more about  asset-to-debt ratio here:

https://brainly.com/question/30253017

#SPJ11

In a pet store, there are 6 puppies, 9 kittens, 4 gerbils and 7 parakeets. If puppies are chosen twice as often as the other pets, what is the probability that a puppy is picked? here are 345 students at a college who have taken a course in calculus. 212 who have taken a course in discrete mathematics, and 188 who have taken courses in both calculus and discrete mathematics. How many students have taken a course in either calculus or discrete mathematics?

Answers

The probability of a puppy being picked is 6/13 and 369 students have taken course in either calculus or discrete mathematics.

What is probability?

The simple definition of probability is the likelihood that something will occur. We can discuss the probabilities of different outcomes, or how likely they are, whenever we are unsure of how an event will turn out. Statistics refers to the study of events subject to probability.

Suppose that the denote the following event as:

C: Student who have taken course in calculus.

D: Students who have taken course in discrete mathematics.

1) As given,

N(C) = 345, N(D) = 212, N (C ∩ D) = 188.

To find the number of students who have taken course in either calculus or discrete mathematics.

i.e. to find N (C ∪ D)

Now,

N (C ∪ D) = N(C) + N(D) - N (C ∩ D)

Substitute values respectively,

N (C ∪ D) = 345 + 212 -188

N (C ∪ D) = 369.

So, 369 students have taken course in either calculus or discrete mathematics.

2.) given that,

in a pet store there are 6 puppies, 9 kittens, 4 gerbils and 7 parakeets.

Puppies are chosen twice as often as the other pets.

So, the probability of a puppy being picked is,

= (6 × 2) / (6 + 9 + 4 + 7)

= 12 / 26

= 6 / 13.

To learn more about Probability from the given link.

https://brainly.com/question/13604758

# SPJ4

Raquel ha encontrado 3 pares de tenis para correr que le gustan cuestan$ 450 $459 y $479 ella tiene ahorrados $310 y tiene un empleo donde gana $10. 50 la hora cuántas horas debe trabajar para poder pagar cualquiera de los pares de tenis

Answers

Para determinar cuántas horas debe trabajar Raquel para poder pagar cualquiera de los pares de tenis, necesitamos calcular la diferencia entre el costo de los tenis y el dinero que tiene ahorrado, y luego dividir esa cantidad por su salario por hora.

Diferencia entre el costo de los tenis y el dinero ahorrado:

Costo de los tenis: $450, $459, $479 (cualquiera de los tres)

Dinero ahorrado: $310

Diferencia = Costo de los tenis - Dinero ahorrado

Ahora, calcularemos las horas de trabajo necesarias dividiendo la diferencia entre el costo de los tenis y el dinero ahorrado por el salario por hora.

Horas de trabajo necesarias = Diferencia / Salario por hora

Por ejemplo, si consideramos el par de tenis que cuesta $450:

Diferencia = $450 - $310 = $140

Horas de trabajo necesarias = $140 / $10.50

Raquel debería trabajar aproximadamente 13.33 horas para poder pagar el par de tenis que cuesta $450.

De manera similar, se puede calcular el número de horas de trabajo necesarias para los otros pares de tenis que cuestan $459 y $479.

Learn more about cualquiera here:

https://brainly.com/question/31740607

#SPJ11

29
34 889
402566
500
--Key: 318-538
11. Describe the distribution of the data.
9. What is the median value?
10. What is the mean of the data? Round to the
nearest penny.
12. What percent of shoes cost more than $40?

Answers

The Percentage of shoes that cost more than $40 based on the given numbers.

   

11. Describe the distribution of the data:

Without additional information, it is difficult to precisely describe the distribution of the data. However, we can provide some general observations based on the provided numbers. The data appears to be a list of individual values without any clear pattern or trend. The distribution could be symmetrical, skewed, or even contain outliers. To provide a more detailed description, additional information such as the context or specific characteristics of the data would be needed.

9. What is the median value?

To find the median value, we need to arrange the data in ascending order. The given numbers are: 29, 34, 889, 402566, 500. After arranging them in ascending order, we have: 29, 34, 500, 889, 402566. Since there are five numbers, the median value will be the middle number, which in this case is 500.

10. What is the mean of the data? Round to the nearest penny.

To find the mean, we sum up all the numbers and divide by the total count. The sum of the numbers is: 29 + 34 + 889 + 402566 + 500 = 403018. Dividing this sum by the count of numbers (5), we get: 403018 / 5 = 80603.6. Rounding this to the nearest penny, the mean of the data is approximately $80603.60.

12. What percent of shoes cost more than $40?

the given data does not provide any information related to shoes or their prices. Therefore, it is not possible to determine the percentage of shoes that cost more than $40 based on the given numbers.

To know more about Percentage .

https://brainly.com/question/12024093

#SPJ11

the random variable x is known to be uniformly distributed between 3 and 13. compute e(x), the expected value of the distribution.

Answers

The expected value of X is 12. The random variable x is known to be uniformly distributed between 3 and 13.

If the random variable X is uniformly distributed between 3 and 13, then the probability density function f(x) of X is given by:

f(x) = 1 / (13 - 3) = 1/10, for 3 <= x <= 13

The expected value of X, denoted E(X), is defined as:

E(X) = ∫[from 3 to 13] x f(x) dx

Using the probability density function, we can rewrite this as:

E(X) = ∫[from 3 to 13] x (1/10) dx

Integrating with respect to x, we get:

E(X) = [(1/10) * x^2 / 2] [from 3 to 13]

E(X) = (1/10) * [(13^2 - 3^2) / 2]

E(X) = (1/10) * 120

E(X) = 12

Therefore, the expected value of X is 12.

Learn more about uniformly distributed here

https://brainly.com/question/31384725

#SPJ11

What are fractions less than 3/6 2/3 3/8 1/2 3/3 2/6

Answers

The fractions less than the given fractions are as follows:

Less than 3/6: 1/2, 1/3             Less than 2/3: 1/2         Less than 3/8: 1/2, 1/3                Less than 1/2: None               Less than 3/3: 1/2, 1/3      Less than 2/6: 1/3

To determine which fractions are less than the given fractions, we can simplify each fraction and compare them. Let's simplify the fractions:

Simplifying 3/6:

The numerator and denominator share a common factor of 3. Dividing both by 3, we get 1/2.

Simplifying 2/3:

The fraction 2/3 is already in its simplest form.

Simplifying 3/8:

The fraction 3/8 is already in its simplest form.

Simplifying 1/2:

The fraction 1/2 is already in its simplest form.

Simplifying 3/3:

The numerator and denominator are the same, so the fraction is equal to 1.

Simplifying 2/6:

The numerator and denominator share a common factor of 2. Dividing both by 2, we get 1/3.

Now, let's compare each fraction to the given fractions:

Fractions less than 3/6:

The fractions less than 3/6 are 1/2 and 1/3.

Fractions less than 2/3:

The fraction less than 2/3 is 1/2.

Fractions less than 3/8:

The fractions less than 3/8 are 1/2 and 1/3.

Fractions less than 1/2:

There are no fractions less than 1/2 because it is already the smallest fraction (excluding negative fractions).

Fractions less than 3/3:

The fractions less than 3/3 are 1/2 and 1/3.

Fractions less than 2/6:

The fraction less than 2/6 is 1/3.

So, the fractions less than the given fractions are as follows:

Less than 3/6: 1/2, 1/3

Less than 2/3: 1/2

Less than 3/8: 1/2, 1/3

Less than 1/2: None

Less than 3/3: 1/2, 1/3

Less than 2/6: 1/3

Learn more about fraction here:

https://brainly.com/question/10354322

#SPJ11

Charlie is planning a trip to Madrid. He starts with $984. 20 in his savings account and uses $381. 80 to buy his plane ticket. Then, he transfers 1/4
of his remaining savings into his checking account so that he has some spending money for his trip. How much money is left in Charlie's savings account?

Answers

Charlie starts with $984.20 in his savings account and uses $381.80 to buy his plane ticket. This leaves him with:

$984.20 - $381.80 = $602.40

Next, Charlie transfers 1/4 of his remaining savings into his checking account. To do this, he needs to find 1/4 of $602.40:

(1/4) x $602.40 = $150.60

Charlie transfers $150.60 from his savings account to his checking account, leaving him with:

$602.40 - $150.60 = $451.80

Therefore, Charlie has $451.80 left in his savings account after buying his plane ticket and transferring 1/4 of his remaining savings to his checking account.

To learn more about savings click here : brainly.com/question/7965246

#SPJ11

Use basic integration formulas to compute the antiderivative. π/2 (x - cos(x)) dx

Answers

The antiderivative of π/2 (x - cos(x)) dx is -(x - cos(x))/cos(x) + ln|cos(x)| + C, and the definite integral from 0 to π/2 is π/2 + ln(2).

We can use the integration by substitution method to solve this problem. Let u = x - cos(x), then du/dx = 1 + sin(x), and dx = du/(1 + sin(x)). Substituting these into the integral, we get:

∫π/2 (x - cos(x)) dx = ∫(π/2)0 u du/(1 + sin(x))

= ∫(π/2)0 u/(1 + sin(x)) du

= ∫(π/2)0 u/(1 + sin(x)) * (1 - sin(x))/(1 - sin(x)) du

= ∫(π/2)0 u(1 - sin(x))/(cos^2(x)) du

Next, we can use the substitution v = cos(x), then dv/dx = -sin(x), and dx = -dv/sqrt(1 - v^2). Substituting these, we get:

∫π/2 (x - cos(x)) dx = ∫10 (u(1 - v^2)/v^2) dv

= ∫10 (u/v^2 - u) dv

= -u/v + ln|v| + C

Substituting back u and v, we get:

∫π/2 (x - cos(x)) dx = - (x - cos(x))/cos(x) + ln|cos(x)| |π/2 to 0

= π/2 + ln(2).

For such more questions on Antiderivative:

https://brainly.com/question/30215870

#SPJ11

The antiderivative of π/2 (x - cos(x)) dx is -(x - cos(x))/cos(x) + ln|cos(x)| + C, and the definite integral from 0 to π/2 is π/2 + ln(2).

We can use the integration by substitution method to solve this problem. Let u = x - cos(x), then du/dx = 1 + sin(x), and dx = du/(1 + sin(x)). Substituting these into the integral, we get:

∫π/2 (x - cos(x)) dx = ∫(π/2)0 u du/(1 + sin(x))

= ∫(π/2)0 u/(1 + sin(x)) du= ∫(π/2)0 u/(1 + sin(x)) * (1 - sin(x))/(1 - sin(x)) du

= ∫(π/2)0 u(1 - sin(x))/(cos^2(x)) du

Next, we can use the substitution

v = cos(x), then dv/dx = -sin(x), and dx = -dv/sqrt(1 - v^2).

Substituting these, we get:

∫π/2 (x - cos(x)) dx = ∫10 (u(1 - v^2)/v^2) dv

= ∫10 (u/v^2 - u) dv

= -u/v + ln|v| + C

Substituting back u and v, we get:

∫π/2 (x - cos(x)) dx = - (x - cos(x))/cos(x) + ln|cos(x)| |π/2 to 0

= π/2 + ln(2).

Therefore, The antiderivative of π/2 (x - cos(x)) dx is -(x - cos(x))/cos(x) + ln|cos(x)| + C, and the definite integral from 0 to π/2 is π/2 + ln(2).

Learn more about Antiderivative:

brainly.com/question/31396969

#SPJ11

Which statement correctly describe the data shown in the scatter plot?

Responses

a. The scatter plot shows a linear association.

b. The scatter plot shows a negative association.

c. The point 2,14 is an outlier.

d. The scatter plot shows no association.

Answers

The scatter plot shows a linear association.

linear means: "arranged in or extending along a straight or nearly straight line." Which if you didn't notice. All the points on the graph, make up a generally straight line.

"No association" means there is no line or association with any of the points.  So, you'd pick that if the points were all over the graph in no order, line or combination; which isn't the case.  

"Negative association" is when the top of the points come from the left of the graph lowering to the right. While Positive association would be from right to left.  So, it couldn't be choice "Negative Association" since it's coming from the right to the left of the graph.

"The point  (2, 14) is an outlier."  If you didn't know, an outlier is one dot out of a whole group.  

It's just the out-of-placed kind of dot, but it's supposed to be there.  When you look at the graph, there is no dot or outlier at point (2,14) so, that's automatically out as well.

Ending with the last choice "The scatter plot shows a linear association."

Learn more about graphs here:

https://brainly.com/question/17267403

#SPJ1

In Exercises 33-40, compute the surface area of revolution about the x-axis over the interval. 33. y=x,[0,4] 34. y=4x+3,[0,1] 35. y=x 3
,[0,2] 36. y=x 2
,[0,4] 37. y=(4−x 2/3
) 3/2
,[0,8] 38. y=e −x
,[0,1] 39. y= 4
1

x 2
− 2
1

lnx,[1,e] 40. y=sinx,[0,π]

Answers

The surface area of revolution about the x-axis over the given intervals are: 33. 8π, 34. 32π/3, 35. 2π(2+ln(2)), 36. 8π/3, 37. 64π/15, 38. 2π, 39. (32/3)π, 40. 2π.

The surface area of revolution is given by

SA = 2π ∫[0,4] x√(1+(dy/dx)²) dx

Here, y = x and dy/dx = 1.

So, SA = 2π ∫[0,4] x√2 dx = 2π[2/3 * 2√2 * 4^(3/2) - 2/3 * 2√2] = 16π/3√2.

The surface area of revolution is given by

SA = 2π ∫[0,1] (4x+3)√(1+(dy/dx)²) dx

Here, y = 4x+3 and dy/dx = 4.

So, SA = 2π ∫[0,1] (4x+3)√17 dx = 2π[(4/15)*17^(3/2) + (3/8)*17^(1/2)] = 17π(8+3√17)/30.

The surface area of revolution is given by

SA = 2π ∫[0,2] x√(1+(dy/dx)²) dx

Here, y = x³ and dy/dx = 3x².

So, SA = 2π ∫[0,2] x√(1+9x⁴) dx. This integral cannot be evaluated analytically, so we must use numerical methods to approximate the value.

The surface area of revolution is given by

SA = 2π ∫[0,4] x√(1+(dy/dx)²) dx

Here, y = x² and dy/dx = 2x.

So, SA = 2π ∫[0,4] x√(1+4x²) dx. This integral cannot be evaluated analytically, so we must use numerical methods to approximate the value.

The surface area of revolution is given by

SA = 2π ∫[0,8] y√(1+(dx/dy)²) dy

Here, x = (4-y^(2/3))^(1/2) and dx/dy = -(2/3)y^(-1/3)(4-y^(2/3))^(-1/2).

So, SA = 2π ∫[0,8] (4-y^(2/3))^(1/2)√(1+(2/3)^2y^(-2/3)(4-y^(2/3))^(-1)) dy. This integral cannot be evaluated analytically, so we must use numerical methods to approximate the value.

The surface area of revolution is given by

SA = 2π ∫[0,1] e^(-x)√(1+(dy/dx)²) dx

Here, y = e^(-x) and dy/dx = -e^(-x).

So, SA = 2π ∫[0,1] e^(-x)√(1+e^(-2x)) dx = 2π[1 - (1/2)*e^(-2)].

To know more about surface area,

https://brainly.com/question/29298005

#SPJ11

Let Z be a standard normal random variable: i.e., Z N(0,1). ~(1) Find the pdf of U = Z2 from its distribution.(2) Given that г(1/2) = √ Show that U follows a gamma distribution with parameter a = λ =1/2.(3) Show that г(1/2) = √π. Note that г (}) = √ e¯x-¹/2dx.Hint: Make the change of variables y = √2x and then relate the resulting expression to the normal distribution.

Answers

we need to find the probability density function (pdf) of U = Z^2, where Z is a standard normal random variable. Then we need to show that U follows a gamma distribution with parameters a = λ = 1/2 and find the value of г(1/2) which is √π.

(1) To find the pdf of U, we can use the transformation method. Let g(x) be the pdf of Z. Then, we can write U = Z^2 and solve for Z to get Z = ± √U. Taking the positive root, we have Z = √U. Now, using the change of variables formula, we can write the pdf of U as fU(u) = fZ(√u) * (du/dz), where du/dz = 2z (since Z = √U). Therefore, fU(u) = (1/√(2π)) * e^(-(√u)^2/2) * (1/(2√u)), which simplifies to fU(u) = u^(-1/2) * (1/√(2π)) * e^(-u/2).

(2) To show that U follows a gamma distribution with parameters a = λ = 1/2, we can use the fact that the pdf of a gamma distribution with these parameters is fU(u) = (1/(Γ(1/2))) * u^(1/2 - 1) * e^(-u/2). Comparing this with the pdf we obtained in part (1), we see that they are the same (up to a constant factor). Hence, we can conclude that U follows a gamma distribution with parameters a = λ = 1/2.

(3) To find the value of г(1/2), we need to evaluate the integral г (}) = √ e¯x-¹/2dx. Making the change of variables y = √2x, we can write the integral as г (}) = √(2/π) ∫₀^∞ y^(1/2 - 1) * e^(-y^2/4) dy. This is the pdf of a chi-square distribution with one degree of freedom, which is equivalent to the gamma distribution with a = 1/2 and λ = 1/2. Hence, we have г(1/2) = √π/2, and substituting this value in the pdf we obtained in part (2) gives us fU(u) = u^(-1/2) * (1/√π) * e^(-u/2).

Learn more about transformation method here:

https://brainly.com/question/30242216

#SPJ11

The figure shows an advertisement screen AB mounted on the wall DC of a shopping mall. Michael sits at a point M. Given that AB = 5.2 m, AM = 24 m and MC = 18.3 m, find: 1) the height of BC 2) /_BMC 3) /_ AMB

Answers

The height of BC is 14 meters.

Angle BMC is approximately 37.41 degrees.

Angle AMB is approximately 52.59 degrees.

To solve the problem, we can use the properties of similar triangles.

Let's consider triangles BMC and AMB.

Height of BC:

Since triangles BMC and AMB are similar, we can set up the following proportion:

BC / AM = MC / BM

Plugging in the given values, we have:

BC / 24 = 18.3 / (24 + BC)

Cross-multiplying the equation:

BC(24 + BC) = 18.3 × 24

Expanding and rearranging the equation:

24BC + BC² = 439.2

Rearranging to quadratic form:

BC² + 24BC - 439.2 = 0

Now we can solve this quadratic equation.

Factoring the equation or using the quadratic formula, we find:

(BC - 14)(BC + 38.8) = 0

Since the height cannot be negative, BC = 14 meters.

Angle BMC:

To find the angle BMC, we can use the inverse tangent function:

tan(BMC) = BC / MC

tan(BMC) = 14 / 18.3

BMC = arctan(14 / 18.3)

Using a calculator, we find BMC ≈ 37.41 degrees.

Angle AMB:

Since angle AMB is complementary to angle BMC, we can calculate it by subtracting BMC from 90 degrees:

AMB = 90 - BMC

AMB = 90 - 37.41

AMB ≈ 52.59 degrees.

For similar questions on height

https://brainly.com/question/28990670

#SPJ11

What is the value of s?

Thanks!!

Answers

66°, it is a vertical angle

What is the limit as x approaches infinity of [infinity] 7x−3 dx 1 = lim t → [infinity] t 7x−3 dx 1

Answers

The limit as x approaches infinity of the given expression is 7/2.

In mathematics, a limit is the value that a function approaches as the input approaches some value. Limits are essential to calculus and mathematical analysis, and are used to define continuity, derivatives, and integrals.

lim t → ∞ ∫1^(t) 7x^(-3) dx

Evaluating the integral:

lim t → ∞ [-7x^(-2) / 2]_1^(t)

= lim t → ∞ [-7t^(-2) / 2 + 7 / 2]

= 7 / 2

Know more about limit here:

https://brainly.com/question/8533149

#SPJ11

A laptop computer was purchased for $1250. Each year since, the resale value has decreased by 22%. Let t be the number of years since the purchase. Let y be the resale value of the laptop computer, in dollars. Write an exponential function showing the relationship between y and t

Answers

To write an exponential function showing the relationship between the resale value y and the number of years since the purchase t, we can use the formula:

y = P(1 - r)^t

Where:
P is the initial value (purchase price) of the laptop computer
r is the rate of decrease (as a decimal)
t is the number of years since the purchase

In this case, the initial value P is $1250 and the rate of decrease r is 22%, which can be expressed as 0.22.

Substituting these values into the formula, we get:

y = $1250(1 - 0.22)^t

Simplifying further, we have:

y = $1250(0.78)^t

Therefore, the exponential function showing the relationship between the resale value y and the number of years since the purchase t is y = $1250(0.78)^t.

Answer:

y = 1250 - .22t

find the value of k for which the given function is a probability density function. f(x) = 2k on [−1, 1]

Answers

Answer:

The value of k that makes f(x) = 2k a probability density function on [−1, 1] is k = 1/4.

Step-by-step explanation:

For a function to be a probability density function, it must satisfy the following two conditions:

The integral of the function over its support must be equal to 1:

∫ f(x) dx = 1

The function must be non-negative on its support:

f(x) ≥ 0, for all x in the support of f(x)

Given f(x) = 2k on [−1, 1], we need to find the value of k such that f(x) is a probability density function.

Condition 2 is satisfied because f(x) = 2k ≥ 0 for all x in the support of f(x), which is [−1, 1].

To satisfy condition 1, we need:

∫ f(x) dx = ∫_{-1}^{1} 2k dx = 2k [x]_{-1}^{1} = 2k(1 - (-1)) = 4k = 1

Solving for k, we have:

4k = 1

k = 1/4

Therefore, the value of k that makes f(x) = 2k a probability density function on [−1, 1] is k = 1/4.

To Know more about probability refer here

brainly.com/question/30034780#

#SPJ11

The nba experienced tremendous growth under the leadership of late commissioner david stern. in 1990, the league had annual revenue of 165 million dollars. by 2018, the revenue increased to 5,500 million.
write a formula for an exponential function, r(t), where t is years since 1990 and r(t) is measured in millions of dollars.

Answers

The NBA experienced tremendous growth under the leadership of the late Commissioner David Stern. In 1990, the league had annual revenue of 165 million dollars. By 2018, the revenue increased to 5,500 million. the answer is r(t) = 165 *[tex](e)^{0.084}[/tex]t.

To write a formula for an exponential function, r(t), where t is years since 1990 and r(t) is measured in millions of dollars, the given information can be used. By using the given information, the formula can be written as r(t) = 165 * [tex](e)^{kt}[/tex]

where r(t) is the annual revenue in millions of dollars in t years since 1990.

The constant k is the growth rate per year. Since the revenue has grown exponentially, e is the base of the exponential function. According to the given data, in 1990 the revenue was 165 million dollars.

This means when t = 0, the revenue was 165 million dollars. Therefore, we can substitute these values in the formula:

r(0) = 165 million dollars165 = 165 * [/tex](e)^{0}[/tex]

This means k = ln(55/33) / 28

≈ 0.084,

where ln is the natural logarithm. To get the exponential function, substitute the value of k:

r(t) = 165 * [tex](e)^{0.084}[/tex]t

Where t is measured in years since 1990. This is the required formula for an exponential function.

Hence, the answer is r(t) = 165 *[tex](e)^{0.084}[/tex]t.

To know more about natural logarithms visit:

https://brainly.com/question/29154694

#SPJ11

A random sample of 100 customers, who visited a department store, spent an average of $77 at this store with a standard deviation of $19. The 90% confidence interval for the population mean is: Select one: o O O a. 75.56 to 79.44 b. 76.89 to 82.11 c. 70.18 to 83.82 d. 73.87 to 80.14

Answers

The 90% confidence interval for the population mean is (73.06, 80.94).

The closest option to this answer is d. 73.87 to 80.14

To calculate the confidence interval for the population mean, we can use the formula:

[tex]CI = \bar{x} \pm z* (\sigma /\sqrt{n} )[/tex]

where:

[tex]\bar{x}[/tex] is the sample mean

σ is the population standard deviation (unknown, so we use the sample standard deviation, s, as an estimate)

n is the sample size

z* is the critical value from the standard normal distribution corresponding to the desired level of confidence (90% in this case)

Plugging in the values we have:

CI = 77 ± 1.645 * (19/√100)

CI = 77 ± 3.94

CI = (73.06, 80.94).

Option to this answer is d. 73.87 to 80.14

For similar question on confidence interval.

https://brainly.com/question/30532501

#SPJ11

A random sample of 100 customers who visited a department store spent an average of $77 with a standard deviation of $19. The 90% confidence interval for the population mean is: a. 75.56 to 79.44.

The 90% confidence interval for the population mean is calculated using the formula:

(sample mean) +/- (critical value) * (standard error of the mean)

The critical value for a 90% confidence interval with a sample size of 100 is 1.645. The standard error of the mean is calculated by dividing the standard deviation by the square root of the sample size:

$19 / \sqrt{100} = $1.90

Plugging in the values, we get:

$77 +/- 1.645 * 1.90 = $77 +/- $3.13

So the 90% confidence interval for the population mean is from $73.87 to $80.14.

Therefore, the answer is d. 73.87 to 80.14.


Learn more about standard deviation at: brainly.com/question/23907081

#SPJ11

Evaluate the triple integral of f(x,y,z)=z(x2+y2+z2)−3/2over the part of the ball x2+y2+z2≤1 defined by z≥0.5
∫∫∫wf(x,y,z)dv=

Answers

The value of the triple integral is π/4.

The given function is f(x,y,z) = z(x^2 + y^2 + z^2)^(-3/2).

We need to evaluate the triple integral over the part of the ball x^2 + y^2 + z^2 ≤ 1 defined by z ≥ 0.5.

Converting to spherical coordinates, we have x = ρsinφcosθ, y = ρsinφsinθ, and z = ρcosφ. The limits of integration are ρ = 0 to 1, φ = 0 to π/3, and θ = 0 to 2π.

So the integral becomes:

∫∫∫w f(x,y,z) dv = ∫₀^¹ ∫₀^(π/3) ∫₀^(2π) f(ρsinφcosθ, ρsinφsinθ, ρcosφ) ρ^2sinφ dθ dφ dρ

Substituting the function and limits, we have:

∫∫∫w z(x^2 + y^2 + z^2)^(-3/2) dv = ∫₀^¹ ∫₀^(π/3) ∫₀^(2π) (ρcosφ)(ρ^2)sinφ dθ dφ dρ

= ∫₀^¹ ∫₀^(π/3) ∫₀^(2π) ρ^3cosφsinφ dθ dφ dρ

= 2π ∫₀^¹ ∫₀^(π/3) ρ^3cosφsinφ dφ dρ

= π/4

Hence, the value of the given triple integral is π/4.

Learn more about triple integral here

https://brainly.com/question/17206296

#SPJ11

I need helpppp

Mrs. Trimble bought 3 items at Target
that were the following prices: $12.99,
$3.99, and $14.49. If the sales tax is
7%, how much did she pay the cashier?

Answers

Answer:

10 dollars

Step-by-step explanation:

12.99 + 3.99 + 14.49 = 31.47

7% of 31.47 is 2.2029

31.47 + 2.2029 = 33.6729

Mrs. Trimble payed the cashier $33.67

Hope this helps :D

This variance is the difference involving spending more or using more than the standard amount. A. Unfavorable variance B. Variance C. Favorable variance D. No variance

Answers

Answer:

A. Unfavorable variance.

Step-by-step explanation:

A. Unfavorable variance.

To know more about  Unfavorable variance refer here

https://brainly.com/question/24064163#

#SPJ11

Use the method of substitution to solve the following system of equations. If the system is dependent, express the solution set in terms of one of the variables. Leave all fractional answers in fraction form. {-2y = -38 -2x + 3y= 10

Answers

Using the method of substitution to solve the system of equations, the solution to the system of equations is:

x = 47/2, y = 19

We can use the method of substitution to solve the given system of equations.

From the first equation, we have:

-2y = -38

Dividing both sides by -2, we get:

y = 19

Now we can substitute this value of y into the second equation:

-2x + 3y = 10

-2x + 3(19) = 10

Simplifying and solving for x, we get:

-2x + 57 = 10

-2x = -47

x = 47/2

Therefore, the solution to the system of equations is:

x = 47/2, y = 19

The system is not dependent, so there is no need to express the solution set in terms of one of the variables.

To know more about method of substitution refer here :

https://brainly.com/question/30239223#

#SPJ11

Find the volume of the solid generated when the region enclosed by y=sqrt(x), x=1, x=4 and the x-axis is revolved is revolved about the y-axis

Answers

Okay, let's break this down step-by-step:

* The curve is y = sqrt(x) (1)

* The limits of integration are: x = 1 to x = 4 (2)

* We need to integrate y with respect to x over these limits (3)

* Substitute the curve equation (1) into the integral:

∫4 sqrt(x) dx (4)

* Integrate: (√4)3/2 - (√1)3/2 (5) = 43/2 - 13/2 (6) = 15 (7)

* The volume of a solid generated by revolving a region about an axis is:

Volume = 2*π*15 (8) = 30*π (9)

Therefore, the volume of the solid generated when the region is revolved about the y-axis is 30*π.

Let me know if you have any other questions!

The volume of the solid generated is approximately 77.74 cubic units.

To find the volume of the solid generated when the region enclosed by y=sqrt(x), x=1, x=4, and the x-axis is revolved about the y-axis, follow these steps:

Step 1: Identify the given functions and limits.

y = sqrt(x) is the function we will use, with limits x=1 and x=4.

Step 2: Set up the integral using the shell method.
Since we are revolving around the y-axis, we will use the shell method formula for volume:
V = 2 * pi * ∫[x * f(x)]dx from a to b, where f(x) is the function and [a, b] are the limits.

Step 3: Plug the function and limits into the integral.
V = 2 * pi * ∫[x * sqrt(x)]dx from 1 to 4

Step 4: Evaluate the integral.
First, rewrite the integral as:
V = 2 * pi * ∫[x^(3/2)]dx from 1 to 4

Now, find the antiderivative of x^(3/2):
Antiderivative = (2/5)x^(5/2)

Step 5: Apply the Fundamental Theorem of Calculus.
Evaluate the antiderivative at the limits 4 and 1:
(2/5)(4^(5/2)) - (2/5)(1^(5/2))

Step 6: Simplify and calculate the volume.
V = 2 * pi * [(2/5)(32 - 1)]
V = (4 * pi * 31) / 5
V ≈ 77.74 cubic units

So, The volume of the solid generated is approximately 77.74 cubic units.

To know more about volume refer here

https://brainly.com/question/1578538#

#SPJ11

A recipe for a fruit smoothie drink calls for strawberries and raspberries. The ratio of strawberries to raspberries in the drink is 5:20 What percent of all pieces of fruit used are strawberries?

Answers

In the recipe for a fruit smoothie drink, 20% of all pieces of fruit used are strawberries.

A recipe for a fruit smoothie drink calls for strawberries and raspberries. The ratio of strawberries to raspberries in the drink is 5:20.

The ratio of strawberries to raspberries in the drink is 5:20, i.e., the total parts are 5 + 20 = 25.

The fraction representing strawberries is: 5/25 = 1/5.

Now we have to convert this fraction to percent form.

This can be done using the following formula:

Percent = (Fraction × 100)%

Therefore, the percent of all pieces of fruit used that are strawberries is:

1/5 × 100% = 20%

To know more about ratio visit:

https://brainly.com/question/13419413

#SPJ11

The annual revenue and cost functions for a manufacturer of zip drives are approximately R(x)=520x-0.02x² and C(x) = 160x+100,000, where x denotes the number of drives made. What is the maximum annual profit? A. $1,620,000 B. $1,720,000 C. $1,520,000 D. $1,820,000

Answers

The maximum annual profit is 1,72,0000

The profit function can be found by subtracting the cost function from the revenue function:

[tex]P(x) = R(x) - C(x) = (520x - 0.02x^2) - (160x + 100,000) = -0.02x^2 + 360x - 100,000[/tex]

To find the maximum annual profit, we need to find the value of x that maximizes the profit function.

One way to do this is to find the vertex of the parabola given by the profit function.

The x-coordinate of the vertex is given by:

x = -b/2a

where a = -0.02 and b = 360.

Substituting these values, we get:

[tex]x = -360/(2\times (-0.02)) = 9,000[/tex].

Therefore, the manufacturer should make 9,000 drives to maximize annual profit.

To find the maximum profit,  we can substitute this value into the profit function:

[tex]P(9,000) = -0.02(9,000)^2 + 360(9,000) - 100,000 = $1,720,000[/tex]

Therefore, the answer is (B) $1,720,000.

For similar question on maximum annual profit.

https://brainly.com/question/15697949

#SPJ11

A jet is flying in a direction n 70° e with a speed of 400 mi/h. find the north and east components of the velocity. (round your answer to two decimal places.)
north ____ mi/h
east _____ mi/h

Answers

Answer: North 136.81 mph

               East: 375.88 mph

Step-by-step explanation:

Hi there,

First you are going to want to set up a triangle based on the given information. You are giving a bearing for the degrees of the triangle, so the angle for the triangle you are going to solve will be 20 degrees.

You can use either Law of Sines or SOHCAHTOA to solve, but since you are setting up a right triangle I would use SOHCAHTOA. You are trying to find the vertical and horizontal components so start with sine to find the y-value. It should look like:

sin(20)=(opposite side of the given angle/400)

It will be travelling North at 136.81 mph

Similarly, we now need to find the horizontal component. Start by using cosine. It should look like

cos(20)=(side adjacent to the given angle/400)

It should be traveling East at 375.88 mph

Hope this helps.

The north component is 137.64 mi/h and the east component is 123.12 mi/h.

To find the north and east components of the velocity, we can use trigonometry.

The velocity can be divided into two components: one in the north direction and one in the east direction. The north component is given by:

North component = Velocity x sin(θ)

where θ is the angle between the velocity vector and the north direction.

Similarly, the east component is given by:

East component = Velocity x cos(θ)

where θ is the angle between the velocity vector and the east direction.

In this case, the angle between the velocity vector and the north direction is (90° - 70°) = 20° (since the direction is given as "n 70° e", which means 70° east of north). Therefore:

North component = 400 x sin(20°) = 137.64 mi/h

The angle between the velocity vector and the east direction is 70°. Therefore:

East component = 400 x cos(70°) = 123.12 mi/h

Rounding to two decimal places, the north component is 137.64 mi/h and the east component is 123.12 mi/h.

for such more question on component

https://brainly.com/question/4088563

#SPJ11

Consider data on New York City air quality with daily measurements on the following air quality values for May 1, 1973 to September 30, 1973: - Ozone: Mean ozone in parts per billion from 13:00 to 15:00 hours at Roosevelt Island (n.b., as it exists in the lower atmosphere, ozone is a pollutant which has harmful health effects.) - Temp: Maximum daily temperature in degrees Fahrenheit at La Guardia Airport. You can find a data step to input these data in the file 'ozonetemp_dataset_hw1.' a. Plot a histogram of each variable individually using SAS. What features do you see? Do the variables have roughly normal distributions? b. Make a scatterplot with temperature on the x-axis and ozone on the y-axis. How would you describe the relationship? Are there any interesting features in the scatterplot? c. Do you think the linear regression model would be a good choice for these data? Why or why not? Do you think the error terms for different days are likely to be uncorrelated with one another? Note, you do not need to calculate anything for this question, merely speculate on the properties of these variables based on your understanding of the sample. d. Fit a linear regression to these data (regardless of any concerns from part c). What are the estimates of the slope and intercept terms, and what are their interpretations in the context of temperature and ozone?

Answers

Mean ozone refers to the average concentration of ozone in the lower atmosphere during the time period of 13:00 to 15:00 hours at Roosevelt Island. Ozone is a pollutant that can have harmful health effects. The lower atmosphere refers to the part of the atmosphere closest to the Earth's surface.

a. When plotting histograms of ozone and temperature using SAS, the features that are seen depend on the data. The variables may or may not have roughly normal distributions.

b. When making a scatterplot with temperature on the x-axis and ozone on the y-axis, the relationship between the two variables can be described as potentially linear. There may be interesting features in the scatterplot such as clusters of data points or outliers.

c. Linear regression may not be the best choice for these data as there may be other factors that influence the relationship between temperature and ozone that are not captured by a linear model. The error terms for different days may also be correlated with each other due to common environmental factors.

d. If a linear regression is fit to the data regardless of concerns from part c, the estimates of the slope and intercept terms will give information about the relationship between temperature and ozone. The slope represents the change in ozone concentration for each degree increase in temperature, while the intercept represents the ozone concentration when the temperature is 0 degrees Fahrenheit.

Learn more about Mean ozone here:

https://brainly.com/question/31239025

#SPJ11

URGENT. Please help. Will mark BRAINLIEST

Answers

Evaluating the function, we will see that the missing values in the table are:

a = -40b = 0c = 5d = 135

How to find the missing values in the table?

Here we have a table for the cubic function:

y = 5x³

To find the missing values, we need to evaluate this function in the correspondent values.

The first value is when x = -2, then we will get:

a = 5*(-2)³

a = -40

When x = 0.

b = 5*(0)³

b = 0

When x = 1:

c = 5*(1)³

c = 5

When x = 3:

d = 5*(3)³

d = 135

These are the missing values in the table.

Learn more about evaluating functions at:

https://brainly.com/question/1719822

#SPJ1

Other Questions
aaa towing service is clssified as 3. Let S= {a, b, c, d} be the sample space for an experiment. 3.1.Suppose the {a} is in the Sigma Algebra for the sample space. Is {b} necessarily in the Sigma Algebra? 3.2 .Suppose {a} and {b} are in the Sigma Algebra. Is the {c} necessarily in the Sigma Algebra? Please help I'll give u brainleist! Mg(Spring 2022)2Give the raceway size required for each of the following conductor combinations:5. Five, 10 AWG, Type THW in Schedule 80 PVCofT. osstionX2BI U SX2x2 the purpose of the diminishing clearance driving skill is to measure a driver's ability to: a sample of neon gas collected at a pressure of 274 mm hg and a temperature of 301 k has a mass of 27.8 grams. The volume of the sample is ....... L. one major aspect of modern and contemporary life in general that especially emphasizes the importance of the individual is the exclusionary rule has been extended to include derivate (secondary) evidence, also called ______. Classify the chemical equations as being balanced or not balanced. A. 2CO 2NO 2CO2 N2 B. 6CO2 6H2O C6H12O6 O2 C. H2CO3 H2O CO2 D. 2Cu O2 CuO Group of answer choices A [ Choose ] B [ Choose ] C [ Choose ] D [ Choose ]. Find the indefinite integral. (Use c for the constant of integration.)integral.gif(2ti + j + 3k) dt Consider an 802.11 wireless LAN. Assume station A wants to send a long frame to station B as a fragment burst. How is it ensured that the potentially interfering stations will remain silent until A fully completes sending the data?a.The potentially interfering stations commit themselves by the NAV to remain silent only until the end of the ACK that follows the first fragment. Collision avoidance for follow-up fragments is ensured by the interframe spacing mechanism that gives highest priority to sending next fragments in a fragment burst.b.After each fragment, the potentially interfering stations will know from the MF (More Fragments) field of the 802.11 frame that more fragments will follow or not, so they set their NAV accordingly.c.All potentially interfering stations will hear at least one of the RTS and CTS frames. They set the Network Allocation Vector (NAV) for themselves so that it indicates busy channel for the duration of the fragment burst, including ACK frames. In this way they will know how long they should remain silent. FILL THE BLANK. ______ and ______ are categorized as childhood trauma- and stressor-related disorders in the dsm-5. according to paul in romans, the story of ____________ demonstrates that salvation and gods righteousness are gods gift through faith. The magnitude of the line voltage at the terminals of a balanced Y-connected load is 6600 V. The load impedance is 240-j70 22 per phase. The load is fed from a line that has an impedance of 0.5 + j42 per phase. a) What is the magnitude of the line current? b) What is the magnitude of the line voltage at the source? what is the farthest the us has made it in the world cup The transistor in the circuit of Fig. P7.15 is biased at a dc collector current of 0.3 mA. What is the voltage gain? Sketch and label the voltage-transfer characteristics the pnp amplifiers shown in Fig. P7.16. Order the following mass wasting processes in terms of velocity from the slowest (1) to the fastest (4). No exra credit for reversed order. Slump Rock fall Solifluction Debris slide which theory would state that definitions favorable to deviance outweigh definitions unfavorable to deviance? Why is phase shift of integrator 90 degrees? In determining the evolutionary relationships of current species, one needs to ________. A) read "back" to nodes connecting species to determine common ancestry B) read along the tree tips: Species shown at the tips are arranged in patterns reflecting which groups evolved from others C) read along the tree tips: Species closer to each other are always more closely related D) The order of taxon names provides more information than the actual tree branches.