. You have two carts, one which is empty and has mass m. The second cart is of the same mass but loaded with twice the mass of the empty cart i.e. it has mass 3m. You push each of them (one at a time) with the same constant force, over the same distance, starting from rest. After you have pushed them through this distance, you remove the force. How will the kinetic energy of the loaded and empty carts compare to each other

Answers

Answer 1

Answer:

Their kinetic energies would be the same

Explanation:

This is because, since the force, F acting on them moves the same distance, d, the work done by the force is W = Fd.

Now, from work-kinetic energy principles,

W = ΔK where ΔK = change in kinetic energy of the carts.

Since the work-done is the same for both carts, their change in kinetic energies would also be the same.

Since they start from rest, ΔK = K' - K =  K' - 0 = K'

So, the kinetic energies of the carts would be the same


Related Questions

Describe how the composition of gasses changes as you travel up through the Earth’s atmosphere.

Answers

Answer:

As you travel up through the Earth's atmosphere, the composition of gases changes. Near the Earth's surface, the atmosphere consists mainly of nitrogen (about 78%) and oxygen (about 21%) with traces of other gases like carbon dioxide and argon. As you go higher, the amount of oxygen decreases, and the concentration of other gases becomes more prominent, such as helium, hydrogen, and ozone.

How the government can ensure basic human dignity is maintained in relation to safe and healthy living

Answers

To ensure basic human dignity in relation to safe and healthy living, governments can implement various measures such as accessible healthcare, adequate housing, and sanitation and clean water.

How government can ensure basic human dignity is maintained

Governments should place a high priority on ensuring that everyone has access to healthcare services, enabling them to receive the essential medical care without suffering financial difficulty. This entails providing access to necessary pharmaceuticals, cheap healthcare, and a strong healthcare system.

All citizens should have access to affordable and good housing, according to governments. Policies may include restrictions on rental costs, programs to expand the supply of affordable housing, and efforts to combat homelessness. Basic hygienic and safety criteria should be met by housing.

Governments must make sure that everyone has access to clean, safe drinking water and adequate sanitary facilities. The spread of diseases and the maintenance of sanitary living circumstances can be aided by investments in sewage systems, water treatment facilities, and public hygiene education.

Learn more on healthy living here https://brainly.com/question/27440736

#SPJ1

A block on the end of a spring is pulled to position x = A and released. In one full cycle of its motion, through what total distance does it travel? A. A / 2 B. A C24 ) 0.4A ​

Answers

The total distance traveled by the block in a one full or complete cycle is  2A.

option C.

What is the total distance travelled by the block?

If a block on the end of a spring is pulled to position x = A and released. In one full cycle of its motion, it will travel the following distance as shown below;

x = A cos (ωt)

where;

A is the amplitude of the motionω is the angle speed of the block = 2πft is the period of the motion

During a half cycle the block will travel a total distance of A.

During another half cycle the block will travel a total distance of A.

The total distance traveled by the block in a one full or complete cycle is calculated as follows;

distance = A + A

distance = 2A

Learn more about distance of oscillation here: https://brainly.com/question/30426721

#SPJ1

A pizza delivery man has to lift a very large pizza a height of 3.85cm higher than he is already holding it to meet the outstretched arms of the customer. if it takes 116 kj of work on the pizza to lift it this high, what force does he exert on the pizza

Answers

The delivery man exerts a force of approximately 3,012,987 N on the pizza to lift it a height of 3.85 cm.

The work done on the pizza to lift it a level of 3.85 cm can be determined utilizing the equation W = Power*d, where W is the work done, F is the power applied, and d is the distance moved. We are given W = 116 kJ and d = 3.85 cm.

To find the power , we want to switch the distance over completely to meters and the work to joules. 3.85 cm is equivalent to 0.0385 m, and 116 kJ is equivalent to 116,000 J.

Presently we can substitute the qualities in the equation and address for F:

W = Power * d

116,000 J = F0.0385 m

F = 116,000 J/0.0385 m

F = 3,012,987.01 N

Hence, the conveyance man applies a power of roughly 3,012,987 N on the pizza to lift it a level of 3.85 cm.

To learn more about force and work, refer:

https://brainly.com/question/11347650

#SPJ1

Need help with this

Answers

The external force acting on the artillery shell is 2970 x 10⁴N, which is same as the force exerted by the shell on the ship. Both acts in the opposite directions.

Mass of the artillery shell, m = 1350

Acceleration of the artillery shell, a = 2.2 x 10⁴ m/s²

a) The mass of an object is inversely proportional to its acceleration, which is directly proportional to the net force acting onto it.

A moving object accelerates more quickly as the force pushing on it increases. A decline in acceleration is observed when the mass of the object increases.

So, the external force acting on the artillery shell is,

F = ma

F = 1350 x 2.2 x 10⁴

F = 2970 x 10⁴N

b) According to Newton's third law, the magnitude of force exerted by the shell on the ship will be equal to 2970 x 10⁴N, but it will be acting in the opposite direction.

To learn more about force, click:

https://brainly.com/question/30959077

#SPJ1

A plane wave in a nonmagnetic medium has E = 50 sin (10^8 + 2*z) ay V/m. Find (a) The direction of wave propagation (b) λ, f, and Er (c) H​

Answers

(a) The direction of wave propagation is along the negative z-axis.

(b) The wavelength (λ) is π m, the frequency (f) is approximately 1.59 × [tex]10^{7}[/tex] Hz, and the wave impedance (Er) is approximately 0.1667 sin ([tex]10^{8}[/tex] + 2z) ohms.

(c) The magnetic field (H) is (50 sin ([tex]10^{8}[/tex] + 2z)) / (3 × [tex]10^{8}[/tex]) ay A/m.

If the direction of wave propagation is specified as along the negative z-axis, we can conclude that the wave is traveling in the opposite direction to the positive z-axis. In the given expression: E = 50 sin(10^8 + 2z) ay V/m

Since the wave is traveling along the negative z-axis, it means that as z increases (in the positive direction), the wave is propagating in the opposite direction.

Hence, the direction of wave propagation for the given wave is along the negative z-axis.

To find the wavelength (λ), frequency (f), and wave impedance (Er), we can relate the electric field (E) and magnetic field (H) components using the wave equation in a nonmagnetic medium:

E = c * H,

where c is the speed of light in the medium, which can be approximated as 3 × [tex]10^{8}[/tex] m/s in free space.

(a) Direction of wave propagation: Along the positive z-axis.

(b) Calculating λ, f, and Er:

Since the electric field (E) is given as E = 50 sin ([tex]10^{8}[/tex] + 2z) ay V/m, we can see that the angular frequency (ω) is [tex]10^{8}[/tex] rad/s and the wave number (k) is 2.

The relationship between wave parameters is given by: c = λ * f, where c is the speed of light.

Using the relation c = ω/k, we can solve for λ and f:

λ = 2π/k = 2π/2 = π m (meters)

f = ω/2π = [tex]10^{8}[/tex]/2π ≈ 1.59 × [tex]10^{7}[/tex] Hz (Hertz)

To find the wave impedance (Er), we can use the equation Er = E/H:

Er = E/c = (50 sin ([tex]10^{8}[/tex] + 2z)) / (3 × [tex]10^{8}[/tex]) ≈ 0.1667 sin ([tex]10^{8}[/tex] + 2z) ohms.

(c) The magnetic field (H) can be calculated using the relationship H = E/c:

H = (E/c) = (50 sin ([tex]10^{8}[/tex] + 2z)) / (3 × [tex]10^{8}[/tex]) ay A/m.

The direction of wave propagation is along the negative z-axis. (b) The wavelength (λ) is π m, the frequency (f) is approximately 1.59 × [tex]10^{7}[/tex] Hz, and the wave impedance (Er) is approximately 0.1667 sin ([tex]10^{8}[/tex] + 2z) ohms. The magnetic field (H) is (50 sin ([tex]10^{8}[/tex] + 2z)) / (3 × [tex]10^{8}[/tex]) ay A/m.

Know more about magnetic field here:

https://brainly.com/question/14411049

#SPJ11

Which of the following explanations represents why taste aversion breaks the rules of conditioning?

A. Taste aversion requires no cognitive processes in order to develop.

B. Taste aversion is a learned response that does not occur without cognition.

C. Taste aversion can develop after only one pairing of a stimulus and response.

D. Taste aversion cannot be explained by using conditioning processes.

Answers

Answer:

C. Taste aversion can develop after only one pairing of a stimulus and response.

Explanation:

Taste aversion is a unique type of learned response where an individual develops a strong aversion or avoidance to a specific taste or food after a single pairing of that taste with a negative reaction, such as nausea or illness. This is in contrast to traditional conditioning, where multiple pairings of a stimulus and response are typically required for learning to occur. Taste aversion demonstrates a unique rapidity and specificity in its development, which deviates from the general principles of conditioning.

Gravity pulls objects downward. How much work is performed when gravity pulls the man down 0.5 m after each step?

Answers

Each time gravity pulls the man down 0.5 m, it does work of -367.5 J. This work is converted into kinetic energy as the man gains velocity while moving downwards.

The work performed by gravity pulling a man down 0.5 m after each step can be determined utilizing the recipe: work = force x distance x cos(theta), where power is the heaviness of the man (mass x speed increase because of gravity), distance is 0.5 m, and theta is the point between the course of power and the heading of movement (which is 180 degrees since the man is moving downwards).

Expecting the man has a mass of 75 kg, the weight can be determined as 75 kg x 9.8 m/s^2 = 735 N. In this way, the work done by gravity after each step is:

work = 735 N x 0.5 m x cos(180 degrees) = - 367.5 J

The negative sign demonstrates that the work done by gravity is the other way to the relocation of the man. In this way, each time gravity pulls the man down 0.5 m, it takes care of business of - 367.5 J. This work is changed over into active energy as the man acquires speed while moving downwards.

To learn more about work, refer:

https://brainly.com/question/10469204

#SPJ1

Which Of The Following Terms Best Describes Translational Motion Along A Curved Line?

Answers

The term that best describes translational motion along a curved line is option B. curvilinear.

The translational motion refers to the movement of an object in a straight line, where all points of the object move parallel to each other. However, when the motion occurs along a curved path, such as a circle, arc, or any other non-linear trajectory, it is referred to as curvilinear motion.

In curvilinear motion, the object follows a curved path, and the velocity and acceleration vectors change direction as the object moves along the curve. This is different from rectilinear motion, which refers to motion in a straight line.

The rotational motion refers to the movement of an object around an axis or a point, such as the spinning of a wheel or the rotation of a planet. Rotational motion involves objects rotating around a fixed axis rather than moving along a curved line.

General is a broad term that does not specifically describe the type of motion along a curved line. It does not provide any specific information about the nature or characteristics of the motion. Therefore, the correct answer is option B.

The Question was Incomplete, Find the full content below :

Which of the following terms best describes translational motion along a curved line?

A. rectilinear

B. curvilinear

C. rotational

D. general

know more about translational motion here:

https://brainly.com/question/30770506

#SPJ8

The lowest pitch that the average human can hear has a frequency of 28.0 Hz sound with this frequency travels through air with a speed of 331M/S what is the wave length?

Answers

In a case whereby the lowest pitch that the average human can hear has a frequency of 28.0 Hz sound with this frequency travels through air with a speed of 331M/S  the wave length is

What is frequency?

Frequency refers to the number of vibrations measured each second. A wave is a collection of vibrations known as energy. The top node is referred to as the trough, and the bottom node as the crest.

λ = wave velocity/frequency

λ = 331 m/s / 28 Hz

λ = 11.82 m

As a result, the lowest pitch that a typical person can hear is at a frequency of 29 Hz. The wavelength of sound at this frequency is 11.82 m as it moves through air at a speed of 331 m/s.

Learn more about frequency  at:

https://brainly.com/question/10010165

#SPJ1


The reflection in a clear window of a store
is a(n)

Answers

The reflection in a clear window of a store is a(n) image.

Why are images seen as reflection?

Images are seen as reflections because of the behavior of light. When light strikes a smooth, reflective surface such as a mirror or still water, it bounces off the surface at the same angle at which it hit it. This process is called reflection. The reflected light rays then travel to our eyes, creating an image.

The angle of incidence (the angle at which the light strikes the surface) is equal to the angle of reflection (the angle at which the light bounces off the surface). This causes the reflected image to be a mirror image of the original object.

Find out more on reflection here: https://brainly.com/question/29788343

#SPJ1

if one food calorie which equals 1000 "chemistry" calories equals 4184 J, then how far could you go on one cookie containing 50 calories ?

Answers

On one cookie containing 50 calories, you could potentially go approximately 298 meters

How to calculate the value

Given that one food calorie is equivalent to 4184 joules, we can calculate the total energy in joules contained in the 50 calorie cookie:

50 food calories * 4184 J/calorie = 209,200 joules

Assuming an average efficiency of around 25% (meaning 25% of the energy is effectively used for movement), and a body weight of 70 kilograms, we can use a rough estimation that it takes about 1 joule of energy to move 0.4 meters (based on the energy cost of walking).

Distance = (Energy obtained from the cookie * Efficiency) / (Energy cost per meter * Body weight)

Distance = (209,200 J * 0.25) / (1 J/m * 0.4 m/kg * 70 kg)

Distance ≈ 298 meters

Therefore, on one cookie containing 50 calories, you could potentially go approximately 298 meters

Learn more about calories on

https://brainly.com/question/11460467

#SPJ1

a moterist travels 320km at 80km/h and then 320km at 100km/h what is the average speed of moterist for the entire trip​

Answers

Answer:

88.89 km/h.

Explanation:

D = S + T

   = 320km + 320km = 640km.

T = D/S

T1 = 320km / 80km/h = 4 hours

T2 = 320km / 100 km/h = 3.2 hours

Ttotal = T1 + T2 = 4 hours + 3.2 hours = 7.2 hours.

S = D/T

  = 640km / 7.2 hours

  = 88.89 km/h.

*Note:

S = Average speed.

D = Total distance.

T = Total time.

The average speed of the motorist for the entire trip is approximately 88.89 km/h.

To calculate the average speed of the motorist for the entire trip, we need to consider the total distance traveled and the total time taken. In this case, the motorist travels 320 km at 80 km/h and then another 320 km at 100 km/h.

First, let's calculate the time taken for each leg of the trip:

Time taken for the first 320 km at 80 km/h:

Time = Distance / Speed = 320 km / 80 km/h = 4 hours

Time taken for the second 320 km at 100 km/h:

Time = Distance / Speed = 320 km / 100 km/h = 3.2 hours

Now, let's calculate the total distance and total time for the entire trip:

Total distance = 320 km + 320 km = 640 km

Total time = 4 hours + 3.2 hours = 7.2 hours

Finally, we can calculate the average speed:

Average speed = Total distance / Total time = 640 km / 7.2 hours ≈ 88.89 km/h

For such more questions on speed

https://brainly.com/question/30000550

#SPJ11

A skier slides horizontally along the snow for a distance of 22 m before coming to rest. The coefficient of kinetic friction between the skier and the snow is 0.15. Initially, how fast was the skier going, in meters per second?

Answers

The skier was initially going at 8.046 m/s velocity.

Assume that the skier's initial velocity is v.

The skier travelled 22 metres before coming to a stop.

The kinetic friction coefficient between the skier and the snow is 0.15.

The force of friction acting on the skier is given by:

friction = coefficient of friction multiplied by normal force

The normal force is equal to the weight of the skier, which can be calculated as:

weight = mass x gravity

Assuming the mass of the skier to be m and the acceleration due to gravity to be g, we get:

weight = m x g

The force of friction can then be calculated as:

friction = 0.15 x m x g

The work done by the force of friction is equal to the initial kinetic energy of the skier, which can be expressed as:

work done by friction = 0.5 x m x [tex]v^2[/tex]

Equating the work done by friction to the initial kinetic energy, we get:

0.5 x m x [tex]v^2[/tex] = 0.15 x m x g x 22

Simplifying the equation, we get:

[tex]v^2[/tex] = 2 x 0.15 x 9.8 x 22

When we take the square root of both sides, we get:

v = 8.046 m/s

As a consequence, the skier began moving at 8.046 m/s.

For more such questions on velocity, click on:

https://brainly.com/question/80295

#SPJ11

The diagram below shows the velocity vectors for two cars that are moving
relative to each other.
45 m/s west
25 m/s east
Car 1
Car 2
From the frame of reference of car 1, what is the velocity of car 2?
OA. 20 m/s west
OB. 70 m/s east
C. 70 m/s west
D. 20 m/s east

Answers

The relative velocity of the car 2 with respect to car 1 is 70 m/s west. So, the correct option is C.

Velocity of the car 1 with respect to the ground, v₁ = 45 m/s west

Velocity of the car 2 with respect to the ground, v₂ = 25 m/s east

Let the direction towards the east be positive and the opposite direction towards the west be negative.

The expression for the relative velocity of the car 2 with respect to car 1 is given by,

v₂₁ = v₂ - v₁

v₂₁ = 25 - (-45)

Therefore, the relative velocity,

v₂₁ = 70 m/s west

To learn more about relative velocity, click:

https://brainly.com/question/29655726

#SPJ1

Attaching the image file here.

The resistance RT of a platinum varies with temperature T(°C), as measured on the constant-volume gas thermometer according to the equation RT = Ro(1+AT+BT^2). Where A = 3.8×10^-3°C^-1 and B = -5.6×10^-7°C^-2. Calculate the temperature that would be on indicated on a platinum thermometer, when the gas scale reads 200°C.​

Answers

The resistance indicated by the platinum thermometer at 200°C is 1.648 times the reference resistance Ro at 0°C.

The given equation is RT = Ro(1+AT+BT²), where A = 3.8×10⁻³°C⁻¹ and B = -5.6×10⁻⁷°C⁻². To determine the temperature that would be indicated on a platinum thermometer when the gas scale reads 200°C, we will have to use the given formula. RT = Ro(1+AT+BT²) .....(i)We know that the gas scale reads 200°C. Therefore, we can substitute T = 200°C in equation (i).RT = Ro (1 + A × 200 + B × 200²) = Ro (1 + 0.76 - 0.112) = Ro (1.648)Thus, the resistance that the platinum thermometer would indicate is 1.648 times the reference resistance Ro at 0°C. This is the solution to the problem.In summary, The given equation is RT = Ro(1+AT+BT²), where A = 3.8×10⁻³°C⁻¹ and B = -5.6×10⁻⁷°C⁻². To determine the temperature that would be indicated on a platinum thermometer when the gas scale reads 200°C, we substituted T = 200°C in equation (i) to get RT = Ro (1 + A × 200 + B × 200²) = Ro (1 + 0.76 - 0.112) = Ro (1.648).

For more questions on thermometer

https://brainly.com/question/29503787

#SPJ8

what is the full distance when an object is thrown at 35 m/s at an angle of 45 degrees

Answers

Okay, here are the steps to calculate the full distance traveled when an object is thrown at a certain speed and angle:

You have the initial velocity (v): 35 m/s

You have the launch angle (θ): 45 degrees

We need to split the initial velocity into its horizontal (vx) and vertical (vy) components.

To calculate vx (horizontal component):

vx = v * cosθ

vx = 35 * cos(45) = 24.7 m/s

To calculate vy (vertical component):

vy = v * sinθ

vy = 35 * sin(45) = 24.7 m/s

We can calculate the horizontal distance (d) traveled using:

d = vx * t (where t is time)

Since there is no air resistance, the vertical velocity (vy) will remain constant. This means the time the object is in the air is:

t = vy / g (where g is acceleration due to gravity, 9.8 m/s^2)

t = 24.7 / 9.8 = 2.52 seconds

Now we can calculate the full horizontal distance traveled:

d = vx * t

d = 24.7 * 2.52

= 62.3 meters

So the full distance the object will travel when thrown at 35 m/s at a 45 degree angle is approximately 62 meters.

Let me know if you have any other questions!

Answer:

To calculate the full distance traveled by an object thrown at a velocity of 35 m/s at an angle of 45 degrees, we need to consider the horizontal and vertical components of the motion separately.

The horizontal component of the motion remains constant throughout the trajectory and is given by:

Horizontal distance = (Initial velocity) * (Time of flight) * cos(angle)

In this case, the initial velocity is 35 m/s, the angle is 45 degrees, and we need to find the time of flight.

The time of flight can be calculated using the vertical component of the motion. The vertical motion can be described using the equation:

Vertical displacement = (Initial velocity * sin(angle))^2 / (2 * acceleration)

Where the initial velocity is 35 m/s, the angle is 45 degrees, and the acceleration is the acceleration due to gravity, approximately 9.8 m/s^2.

The vertical displacement is zero at the highest point of the trajectory since the object comes back down to the same height it was launched from. So we can solve the equation for the time of flight.

Using these calculations, we can find the horizontal distance traveled by the object.

Let's calculate step by step:

Step 1: Calculate the time of flight

Vertical displacement = 0 (at the highest point)

0 = (35 * sin(45))^2 / (2 * 9.8)

0 = (24.75^2) / 19.6

0 = 616.0125 / 19.6

0 = 31.43

Step 2: Calculate the time of flight

Vertical displacement = (Initial velocity * sin(angle)) * time - (1/2) * acceleration * time^2

0 = (35 * sin(45)) * time - (1/2) * 9.8 * time^2

0 = 24.75 * time - 4.9 * time^2

4.9 * time^2 - 24.75 * time = 0

time * (4.9 * time - 24.75) = 0

time = 0 (initial point) or 24.75 / 4.9

time = 5.05 seconds

Step 3: Calculate the horizontal distance

Horizontal distance = (Initial velocity) * (Time of flight) * cos(angle)

Horizontal distance = 35 * 5.05 * cos(45)

Horizontal distance = 35 * 5.05 * (sqrt(2)/2)

Horizontal distance = 88.96 meters

Therefore, when an object is thrown at 35 m/s at an angle of 45 degrees, the full distance traveled is approximately 88.96 meters.

An average force of magnitude 300 N exerted to compress a spring by 20 cm compute the work done by the force​

Answers

Answer:  60 Joules (J)

Explanation:

To compute the work done by a force, you can use the formula:

Work = Force × Distance × cosθ

In this case, the force applied is 300 N, and the distance is 20 cm (which can be converted to meters by dividing by 100, giving us 0.20 m).

The angle θ represents the angle between the direction of the force and the direction of displacement. Since the force is used to compress the spring, the displacement is in the same direction as the force, and the angle θ is 0 degrees. The cosine of 0 degrees is 1, so we can omit the cosine term.

Now we can calculate the work done:

Work = 300 N × 0.20 m

Work = 60 Joules (J)

Therefore, the work done by the force in compressing the spring is 60 Joules (J).

QUESTION 2
Technician A says when a vehicle pulls to one side; the problem may be caused by a pinion gear binding on the rack gear of a power rack and
pinion steering gear. Technician B says when a power steering rack and pinion steering gear spool valve binds it may cause a vehicle to pull to one
side. Who is correct?
O Technician A only
O Technician B only
O Both Technician A and Technician B
O Neither Technician A nor Technician B

Answers

Both Technician A and Technician B are correct.

option C.

What happens when pinion gear and pinion steering becomes binding?

When the pinion gear of a power rack and pinion steering gear becomes binding or stuck on the rack gear, it can cause serious problem to the vehicle and one of the prolems is that the vehicle will pull to one side.

So if we consider the statement made by the technicians,

Technician A says when a vehicle pulls to one side; the problem may be caused by a pinion gear binding on the rack gear of a power rack and pinion steering gear.

Technician B says when a power steering rack and pinion steering gear spool valve binds it may cause a vehicle to pull to one side.

So both technicians are correct.

Learn more about power steering rack here: https://brainly.com/question/30611616

#SPJ1

radio waves bounce off objects and can be tracked. The photo shows one way this technology is used today

Answers

Doppler radars work by using radio waves that bounce off objects and thus the object can be tracked.

Doppler radars work by emitting a beam of energy from an antenna known as radio waves. The energy they release when they collide with airborne objects scatters in all directions, with some of it returning directly to the radar.

The quantity of energy returned to the radar increases with object size. We can now perceive raindrops in the atmosphere because of this.

The amount of time it takes for the energy beam to be delivered and returned to the radar also gives us the object's distance.

To learn more about Doppler radars, click:

https://brainly.com/question/28096266

#SPJ1

Particles q1 = +8.0 μC, q2= +3.5 μC, and

q3=-2.5 μC are in a line. Particles q1 and q2 are separated by 0.10 m and particles q2 and q3 are separated by 0.15 m. What is the net force on particle q2?

Remember: Negative forces (-F) will point Left Positive forces (+F) will point Right

Please answer bro I will do anything

Answers

The net force on particle q2 is a positive force pointing to the right.

To determine the net force on particle q2, we need to calculate the individual forces exerted on q2 by q1 and q3 and then add them vectorially.

The force between two charged particles can be calculated using Coulomb's law, which states that the force (F) between two charged particles is directly proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them:

F = k * (|q1| * |q2|) / r^2

where k is the electrostatic constant.

Given:

q1 = +8.0 μC

q2 = +3.5 μC

q3 = -2.5 μC

Distance between q1 and q2 (r12) = 0.10 m

Distance between q2 and q3 (r23) = 0.15 m

First, let's calculate the force between q1 and q2:

F12 = k * (|q1| * |q2|) / r12^2

Substituting the values:

[tex]F12 = (9 \times 10^9 N m^2/C^2) * ((8.0 \times 10^-6 C) * (3.5 \times 10^-6 C)) / (0.10 m)^2[/tex]

Calculating the force F12 will give us the magnitude of the force between q1 and q2. However, since q1 and q2 have the same charge sign, the force will be repulsive, pointing to the right.

Next, let's calculate the force between q2 and q3:

[tex]F23 = k * (|q2| * |q3|) / r_{23}^2[/tex]

Substituting the values:

F23 = (9 x 10^9 N m^2/C^2) * ((3.5 x 10^-6 C) * (2.5 x 10^-6 C)) / (0.15 m)^2

Calculating the force F23 will give us the magnitude of the force between q2 and q3. Since q2 and q3 have opposite charge signs, the force will be attractive, pointing to the left.

To find the net force on q2, we need to subtract the force F23 from F12 since they act in opposite directions:

Net force on q2 = F12 - F23

Finally, we need to consider the direction of the forces. Since F12 is repulsive (positive) and F23 is attractive (negative), the net force on q2 will be positive, pointing to the right.

For more such questions on  net force visit:

https://brainly.com/question/14361879

#SPJ8

Activity 1: UNITS OF MEASUREMENT

I. Identify the quantity described by the following units of measurement. Copy and write your answer on one whole sheet of paper.


1. meter per second = _________ 11. joule = ____________

2. meter = _________ 12. Kilogram = ____________

3. second = _________ 13. Cubic meter = _________

4. meter per second squared = ____ 14. Mole = ____________

5. square meter = _________ 15. Kilogram per cubic meter=

6. mass = _________ 16. Watt = ____________

7. newton = _________ 17. Ampere = ____________

8. kelvin = _________ 18. Hertz = ____________

9. volt = _________ 19. Coulomb = ____________

10. candela = __________ 20. Pascal = ____________

Answers

meter per second = speed or velocitymeter = length or distancesecond = timemeter per second squared = accelerationsquare meter = areamass = amount of matter in an objectnewton = forcekelvin = temperaturevolt = electric potential or voltagecandela = luminous intensityjoule = energy or workkilogram = masscubic meter = volumemole = amount of substancekilogram per cubic meter = densitywatt = power or rate of doing workampere = electric currenthertz = frequencycoulomb = electric chargepascal = pressure

To know more about meter

https://brainly.com/question/30295612

#SPJ1

weight of a person is less inside the deep cave​

Answers

The weight of a person is less inside the deep cave​ because, the acceleration due to gravity decreases as we go down towards the depth.

What is meant by gravity ?

Gravity is defined as the force that pulls a body towards the centre of the earth or any other mass-containing physical body.

Here,

Since weight is directly proportional to the acceleration due to gravity, it changes as we travel deeper inside the earth.

This is because as we travel deeper, the acceleration due to gravity also decreases. As a result, the weight decreases when the acceleration due to gravity decreases. Mass is constant; it doesn't change at all.

The gravitational field weakens, and your weight falls as you travel closer to the centre because there is progressive decrease in the acceleration due to gravity as, we go down towards the centre.

Hence,

The weight of a person is less inside the deep cave​ because, the acceleration due to gravity decreases as we go down towards the depth.

To learn more about gravity, click:

https://brainly.com/question/14874038

#SPJ2

Rotation axis. Big disk on the bottom M2 and small disk on the top M1 or mass1. Angular frequency of M₁ is zero.  M₂ initial angular frequency is Wi = 6π rad/s. Two objets both can spine freely in the axis someone is holding M1  and M2 is fixed on the axis. So M1 can slide down the axis and M₂ is fixed its rotating. Surface of M₂ is rough like sand paper but bottom of M1 surface is soft and it can rub on M₂ rough surface. then M1 disk is dropped on M2. then both disks are rotating and M1 cant slipe because of M2 rough surface. find wf final anular frequency of the system​

Answers

The final angular frequency of the system is 3π/2 rad/s. Moment of inertia increased, frictional torque decreased angular momentum, conservation of energy equation used.

At the point when M1 is dropped onto M2, the two circles will be coupled together and pivot as a solitary framework. The complete precise force of the framework should be saved. At first, just M2 was turning with a precise recurrence of Wi = 6π rad/s, while M1 was very still, so the underlying rakish force was L = I2 * Wi, where I2 is the snapshot of dormancy of M2.

At the point when M1 is dropped onto M2, the snapshot of latency of the framework expands, so to preserve rakish energy, the precise recurrence of the framework should diminish. The last rakish recurrence can be tracked down utilizing the preservation of precise force condition: L = I1 * wf + I2 * wf, where I1 is the snapshot of dormancy of M1 and wf is the last rakish recurrence of the framework.

Since M1 is sliding on the unpleasant surface of M2, there is frictional power that goes against its movement. This frictional power creates a force on the framework, which makes the precise energy decline. The last precise recurrence can be determined utilizing the preservation of energy condition, which compares the underlying active energy of the framework to the last dynamic energy of the framework:

0.5 * I1 * 0^2 + 0.5 * I2 * (6π)^2 = 0.5 * (I1 + I2) * wf^2

Improving on the situation and tackling for wf, we get:

wf = 3π/2 rad/s

Thusly, the last rakish recurrence of the framework is 3π/2 rad/s.

To learn more about angular frequency, refer:

https://brainly.com/question/19697633

#SPJ1

Mercury has a mass of
3.30 x 1023 kg, and a radius of
2.44 x 106 m. What is the acceleration
of gravity on its surface?
[?] m/s² Please help!!!

Answers

Answer:

The acceleration due to gravity on the surface of a planet or celestial body is given by the formula:

g = G M / R^2

where G is the gravitational constant, M is the mass of the planet, and R is the radius of the planet.

Plugging in the values for Mercury, we get:

g = (6.674 x 10^-11 m^3/kg s^2) (3.30 x 10^23 kg) / (2.44 x 10^6 m)^2

Simplifying this expression gives:

g = 3.70 m/s^2

Therefore, the acceleration due to gravity on the surface of Mercury is approximately 3.70 m/s^2.

A concave mirror is used to ___
light and a convex mirror is used to___
light. PLEASE HELP

Answers

Answer:

reflect the light

refract the light

Two glasses are filled with liquid to the same height . Glass W is filled with water and glass F is filled with fruit juice. Fruit juice has a higher density than water. Will the pressure in the glass of water be higher or smaller than the pressure in the glass of fruit juice.? Explain your answer​

Answers

The weight at the foot of each glass will be the same because it is decided by the stature of the fluid column over it and the increasing speed due to gravity. Be that as it may, the weight applied by the fluid on the dividers of the holder will be diverse due to contrasts in thickness.

Since natural product juice incorporates a higher thickness than water, the mass of the same volume of natural product juice will be more noteworthy than that of water.

This implies that the constraint applied by the natural product juice on the dividers of the glass will be more prominent than the constraint applied by the water on the dividers of its glass, as the drive is straightforwardly corresponding to mass.

Subsequently, the weight of the glass of natural product juice will be higher than the weight of the glass of water.

In rundown, in spite of the fact that the weight at the foot of each glass will be the same, the weight applied by the fluid on the dividers of the holder will be diverse due to the contrasts in thickness, with the natural product juice applying a more noteworthy weight. 

To know more about pressure refer to this :

https://brainly.com/question/25736513

#SPJ1

Work is done on a wooden crate by pushing it across a floor. The work done is equal to the force applied parallel to the floor multiplied by the

A. force of friction
B. distance moved
C. mass of the crate
D. crate's direction

Answers

The work done is equal to the force applied parallel to the floor multiplied by the distance moves. Hence, option B is correct.

When a wooden crate is pushed across a floor, the work done on it is given by the product of the force applied parallel to the floor and the distance moved by the crate.

This is because work is defined as the product of force and displacement in the direction of the force, which in this case is the distance moved by the crate. The force of friction and the mass of the crate are not relevant to the calculation of work done in this scenario

It is important to understand the concept of work and the factors that influence it, as it is a fundamental concept in physics and is used in many real-world applications.

To learn more about Work done,

https://brainly.com/question/28356414

20N
10N
40N
30N
Balanced or Unbalanced?

Answers

Answer:

Unbalanced

Explanation:

On the upper surface of Jupiter's atmosphere, the attractive force of gravity is 2.5 times that on Earth. What would a bathroom scale show if a 50 kg person were weighed on Jupiter?​

Answers

Explanation:

The weight of an object is the force of gravity acting on it. Therefore, we can use the formula:

where mass is the mass of the person and gravitational acceleration is the acceleration due to gravity on Jupiter.

On Earth, the acceleration due to gravity is approximately 9.8 m/s^2. On Jupiter, the acceleration due to gravity is 2.5 times that on Earth, so it is:

2.5 x 9.8 m/s^2 = 24.5 m/s^2

Therefore, the weight of a 50 kg person on Jupiter would be:

weight = 50 kg x 24.5 m/s^2 = 1225 N

So a bathroom scale on Jupiter would show a weight of approximately 1225 newtons (N) for a 50 kg person

The weight of a 50 kg person on Jupiter can be calculated using the following formula:

Weight on Jupiter = Mass x Gravity on Jupiter

where the mass of the person is 50 kg and the gravity on Jupiter is 2.5 times that on Earth, which is approximately 24.79 m/s^2.

Weight on Jupiter = 50 kg x 24.79 m/s^2

Weight on Jupiter = 1239.5 N

Therefore, a bathroom scale would show a weight of 1239.5 Newtons for a 50 kg person on the upper surface of Jupiter's atmosphere.

Other Questions
Dr. Castellanos has been trained in: a. humanistic therapy b. psychoanalytic therapy c. behavioral therapy d. cognitive therapy, The three essential ... Meiosis is a process thatinto thechromosomes to thenumber, provides geneticPOSSIBLE POINTS: 14. 71, and ensures the correct distribution of True/False: the operating cycle measures the time from the production of a product to the collection of cash and considers that the costs of production are not necessarily paid immediately. Directions:Fill in the blanks with the correct signal words. Choose your answer in the box. Media and information literacy plays an important role in (6)___________ andinformation dissemination. Media literacy education is important to the(7)______________, (8)______________ and (9)______________. The media "Within a mass of sand, blood, clothing, and silence, their illusions, dragged there from far away, remained only as fertilizer, perhaps for a willow, perhaps for a pine." What is significant about the way these two ideas interact? the level of excess reserves is used to determine the lending capacity of the banking startstrue or falsetrue, unselectedfals. true or false? how many ways can a student pick five questions from an exam containing eleven questions? Tuesday 4. 4. 1 Subtraction Life Skills Language Wednesday 4. 4. 2 Length Solve grouping word problems with whole numbers up to 8 Recognise symmetry in own body Recognise number symbol Answer question about data in pictograph Thursday Question 4. 3 Number recognition 4. 4. 3 Time Life Skills Language Life Skills Language Life Skills Language Friday 4. 1 Develop a mathematics lesson for the theme Wild Animals" that focuses on Monday's lesson objective: "Count using one-to-one correspondence for the number range 1 to 8" Include the following in your activity and number the questions correctly 4. 1. 1 Learning and Teaching Support Materials (LTSMs). 4. 12 Description of the activity. 4. 1. 3 TWO (2) questions to assess learners' understanding of the concept (2) during a physics experiment, helium gas is cooled to a temperature of 13.0 k at a pressure of 9.00102 atm.] What are (a) the mean free path in the gas, (b) the rms speed of the atoms, and (c) the average energy per atom? true or false? for verbs ending in -re such as vendre, add -i to make the past participle. true false Equal access policies, like the antidiscrimination policies that are prominent in the United States, accomplish some goals but not others. Which of these is their characteristic shortcoming? Equal access policies do not encourage people to value femininity. = Exercise5d =1. A man receives a monthly salary of $3 500together with a commission of 5% on all salesover $5 000 per month. Calculate his grosssalary in a month in which his sales amountedto $40 000. In the postwar years, jazz was the only popular music then being taken seriously by critics.True or False Evaluate the integral by making the given substitution. (Use C for the constant of integration.)x3(7 + x4)5 dx, u = 7 + x4Evaluate the integral by making the given substitu which of the following is commonly known as misuse detection because it attempts to detect activities that may be indicative of misuse or intrusions? The country of Batavia produces only chocolates and watches. Below is a table with recent information on Batavia production and prices. The base year is 2009.Prices and QuantitiesYear2008200920102011Price of A Box Boxes ofof ChocolatesChocolates$4$5$5$61009010080Price ofWatches.$50$50$60$65.Quantity ofWatches10151512Refer to Table 23-6. What was the inflation rate for 2011? Show your work. .What is the molar solubility of Co(OH)2 (Ksp = 1.3x10-15) in a solution buffered at pH 12.30?(b) How does the molar solubility in the buffered solution compare to the molar solubility in water (i.e Co(OH)2 is x times more/less soluble in the buffered solution than in water.) Landon was comparing the price of apple juice at two stores. The equation y=0. 96xy=0. 96x represents what Landon would pay in dollars and cents, yy, for xx bottles of apple juice at store A. Landon can buy 14 bottles of apple juice at Store B for a total cost of $34. 16. How much more is a bottle of apple juice at Store B than at Store A? Locating information from one's own memory and knowledge is known as a(n) information search, whereas seeking outside sources of information is an external information search.