The wiring of the cable determines whether it is a straight-through or crossover Ethernet cable. A crossover Ethernet cable is used to connect two similar devices directly to each other, whereas a straight-through Ethernet cable is used to connect a device to a switch or router.
Left:Straight-through Ethernet connection from the switch to the workstation.Straight-through Ethernet cable from the router to the switch.from switch to switch Ethernet crossover cable.Computer to router: Ethernet crossover cable.between routers: Ethernet crossover cable.Right:Direct Ethernet cable: Workstation to switch, Router to switch.Ethernet crossover cable Workstation to router, router to router, switch to switch.To know more about Ethernet cable visit:
https://brainly.com/question/14620096
#SPJ4
You have a desktop computer that uses a 250-watt power supply. You recently added a four-disk RAID 10 array to the system, and now it spontaneously shuts down. Which of the following would MOST likely rectify this issue?
answer choices
O Upgrade to smaller capacity hard drives.
O Use the switch on the power supply to switch from 115 VAC to 230 VAC.
O Upgrade to a power supply that provides more volts.
O Upgrade to a power supply that provides more watts.
A very modest computer with few data processing resources requires at least 400 watts for safe operation. Correct answer: Upgrade to a power supply that provides more watts.
Minimum power requirements of a PC:First of all, the minimum power requirements for normal desktop operation today far exceed 250 watts, and 400 watt power supply is recommended at least for a modest computer.
In fact, I think most computers today run on more than 600 watts. Therefore, if 4 hard drives are installed for a system that normally only uses one, obviously 250 watts cannot cover the power needs that these devices adding the total computer system requirement.
Finally, it can be concluded that the optimal solution to the problem is the last option that says: upgrade to a power supply that provides more watts.
To learn more about pc power supply see: https://brainly.com/question/13120349
#SPJ4
while investigating a data breach, you discover that the account credentials used belonged to an employee who was fired several months ago for misusing company it systems. the it department never deactivated the employee's account upon their termination. which of the following categories would this breach be classified as?
This breach would be classified as insider threat. Thus, option 1 is correct.
What is an insider threat?The term "insider threat" describes a cyber security risk that comes from within an organisation. It typically happens when a current or former employee, contractor, vendor, or partner with valid user credentials abuses their access to the organization's networks, systems, and data. Unintentionally or intentionally, an insider threat may be carried out. The integrity, confidentiality, and/or availability of enterprise systems and data are ultimately compromised, regardless of the initial motive.
For most data breaches, insider threats are to blame. The organisation is vulnerable to internal attacks because traditional cybersecurity strategies, policies, procedures, and systems frequently concentrate on external threats. It is challenging for security experts and software to differentiate between normal and harmful activity because the insider already has legitimate access to data and systems.
Learn more about insider threats
https://brainly.com/question/30369923
#SPJ4
Complete question:
While investigating a data breach, you discover that the account credentials used belonged to an employee who was fired several months ago for misusing company IT systems. Apparently, the IT department never deactivated the employee's account upon their termination. Which of the following categories would this breach be classified as?
Options are :
Insider Threat Zero-dayKnown threatAdvanced persistent threatTechnology Needs Template Certified Public Accountant (CPA) The CPA is a senior position at a tax preparation company. The CPA will be not only handling sensitive customer data from personal tax returns but also preparing tax returns for corporate clients. The CPA is also responsible for the personal tax returns filled out by the tax and data-entry specialist employees. Hardware Components Software Security Measures Human Computer Interaction (HCI) Networking Equipment Tax Specialist The tax specialist has the dual role of entering data and verifying that tax returns are correct. This position involves customer interaction in gathering data for minimizing taxes owed or maximizing tax refunds. Hardware Components Software Security Measures Human Computer Interaction (HCI) Networking Equipment Data Entry Specialist Ohis position requires data entry for personal tax returns for customers who walk in the door. Although the data-entry specialist works with sensitive customer data, they do not have access to the tax returns once the returns are submitted to the tax specialist for review. Hardware Components Software Security Measures Human Computer Interaction (HCI) Networking Equipment
CPAs are trained to provide a wide range of services, including tax preparation, financial statement audits, and management consulting.
What is Certified Public Accountant (CPA) ?
A Certified Public Accountant (CPA) is a licensed professional who is qualified to provide a range of accounting services to individuals, businesses, and other organizations.
In the United States, the CPA license is issued by individual states, and the requirements to become a CPA vary slightly from state to state.
Typically, to become a CPA, an individual must meet certain education and experience requirements, as well as pass a rigorous exam that tests their knowledge of accounting, taxation, auditing, and other related areas. In addition, many states require candidates to complete continuing education courses to maintain their license.
CPAs are trained to provide a wide range of services, including tax preparation, financial statement audits, and management consulting.
They are also responsible for ensuring that financial reports are accurate, complete, and comply with all relevant regulations and standards.
In addition to providing services directly to clients, CPAs may also work in government agencies, non-profit organizations, and private industry.
They play a critical role in maintaining the financial integrity of businesses and organizations of all sizes.
To know more about Accountant, visit: https://brainly.com/question/30531451
#SPJ4
3. (6pts) Let h1 and h2 be two hash functions. Show that if either h1 or h2 is collision resistant, then the hash function h(x) = h1(x) ||h2(x), is collision resistant. (here "| means concatenation)
As we have shown that h1 or h2 is a collision-resistant function, thus h1(x) || h2(x) is collision-resistant. Given, h1 and h2 be two hash functions. And, | denotes concatenation.
Proof: Suppose we have two input values 'x' and 'y' and h1 and h2 are the hash functions such that: h1(x) = h1(y), h2(x) = h2(y)
Let's define h(x) = h1(x) || h2(x) and h(y) = h1(y) || h2(y).Now we have to show that h(x) = h(y).
Then h1(x) || h2(x) = h1(y) || h2(y) implies that h1(x) = h1(y) and h2(x) = h2(y).It means either h1 or h2 is collision-resistant, then it must be hard to find different inputs with the same output. Thus h1(x) || h2(x) is collision-resistant.
For given hash functions h1 and h2, let's suppose that h1 is a collision-resistant function. Now, if we take any input 'x' and 'y', then we have h1(x) = h1(y) then x and y must be same to get the same output.
If we take another hash function h2 and x and y, then it is not sure that they are same as we have taken any function. But we can see that whatever the value of x or y, we can't get the same output until we take the same values. Thus h1(x) || h2(x) is collision-resistant.
Learn more about hash functions: https://brainly.com/question/15123264
#SPJ11
FILL IN THE BLANK. __ is an environment where processors are embedded in objects that communicate with one another via the internet or wireless networks.
The environment described in the fill-in-the-blank question is known as the Internet of Things (IoT).
IoT is a network of interconnected physical devices, vehicles, buildings, and other objects that are embedded with sensors, software, and other technologies that enable them to collect and exchange data over the internet. These devices can range from small sensors to large industrial machines and can be used in various fields, such as healthcare, transportation, manufacturing, and smart homes. The data collected from these devices can be analyzed to gain insights and make better decisions, leading to increased efficiency and productivity, cost savings, and improved user experiences.
Learn more about IoT :
https://brainly.com/question/29641982
#SPJ4
Which of the following is a value that is written into the code of a program?
A. an assignment statement
B. a variable
C. a literal
D. an operator
A literal is a value that is written into the code of a program, such as a number or a string of text.
What is literal in code of a program?
In any programming language a literal is a value that is written into the code of a program, such as a number or a string of text.
It represents a fixed value that cannot be changed during the execution of the program.
In contrast, variables hold values that can be changed during the execution of the program, assignment statements are used to assign values to variables, and operators perform operations on variables and literals to produce new values.
So, literal is a fixed value written directly into code of any program, such as a number or string of text. literals represents a specific value that cannot be changed during the execution of the program.
To know more about literal in program, visit: https://brainly.com/question/15057054
#SPJ4
FILL IN THE BLANK. The command-line command _______ 127.0.0.1 -l 65000 -w 0 -t will send multiple large packets to a computer, and when initiated by multiple senders may cause a denial-of-service attack.A. pingB. ddosC. tracertD. dos
The answer is DDOS.(Option B) The given command is a commonly used command for launching a distributed denial-of-service (DDoS) attack, which involves sending multiple large packets to a target computer or network from multiple sources, thereby overwhelming the target system and causing a disruption of service.
The command sends packets to the IP address 127.0.0.1 (which is a loopback address that refers to the local host), using various parameters such as the port number (-l), packet size (-w), and time duration (-t).
How can DDOS be prevented?There are several ways to prevent DDoS attacks, including implementing firewalls and intrusion prevention systems, using content delivery networks (CDNs) or cloud-based services that can absorb traffic, and using load balancers to distribute traffic evenly across multiple servers.
Note as well that monitoring network traffic and identifying unusual traffic patterns can help to detect and mitigate DDoS attacks.
Learn more about DDOS:
https://brainly.com/question/29238912
#SPJ1
Use the print and println methods to create your first Java application and print the output shown below. Be sure to match the spacing and the uppercase/lowercase characters as shown below under EXPECTED OUTPUT:
Note: The first line of the alphabet tree has 11 spaces preceding the capital letter A.
Hello, Java World!
I am learning how to program :-) !
Did you know print and println are different methods?
The print method doesn't append a new line at the end, but the println method does. There is also a method named printf that we'll learn about in a later chapter.
I will demonstrate the intricacies of whitespace and typecase by drawing a tree of the alphabet.
A
b c
D E F
g h i j k
L M N O P Q
s t u v w x y
Z
Several lines can be presented in a single statement by using newline characters. System, newline letters.
Programmers utilize the Java programming language to create applications for laptops, data centers, game consoles, scientific supercomputers, mobile phones, and other gadgets. Java is the third most common programming language in the world, after Python and C, according to the TIOBE index, which ranks the popularity of computer languages. Java is a powerful, object-oriented, class-based programming language used to develop a variety of desktop, mobile, and web applications. Java is one of the most well-known and in-demand programming languages in the current IT industry. Unlike to various other programming languages, Java is not challenging or complex to master. The developers claim that the language is easy to learn.
Learn more about Java programming language here:
https://brainly.com/question/30423264
#SPJ4
Question 3 of 10
What information system would be most useful in determining what direction
to go in the next two years?
OA. Decision support system
B. Management information system
C. Executive information system
D. Transaction processing system
Executive information system would be most useful in determining what direction to go in the next two years. The correct option is C.
What is executive information system?The best tool for deciding where to go in the following two years would be an executive information system.
An information system called an executive information system is created to give executives and other top-level managers quick and simple access to the data they need to make critical strategic choices.
It offers high-level summaries of data about a company's performance, including financial, sales, and market statistics, which can be used to assist strategic planning and decision-making.
Therefore, the optimum choice for determining the course to take over the next two years would be an executive information system.
Thus, the correct option is C.
For more details regarding executive information system, visit:
https://brainly.com/question/27732791
#SPJ9
TRUE/FALSE.supertype/subtype relationships should not be used when the instances of a subtype participate in no relationships which are unique to that subtype.
When instances of a subtype do not take part in any connections that are specific to that subtype, supertype/subtype relationships should not be used. Built-in components can be used to create packaged data models.
Can one subtype interact with another subtype?A supertype is a type of generic entity that is connected to one or more subtypes. A subtype is a division of an entity type that is important to the organisation and that differs from other subgroups due to certain traits or connections.
Can a supertype instance also be an instance of more than one subtype?It is possible for an instance of a supertype to belong to two or more subtypes at once. A bank has three different kinds of accounts.
To know more about connections visit:-
https://brainly.com/question/2286905
#SPJ4
TRUE supertype/subtype relationships should not be used when the instances of a subtype participate in no relationships which are unique to that subtype.
Can one subtype interact with another subtype?A supertype is a type of generic entity that is connected to one or more subtypes. A subtype is a division of an entity type that is important to the organisation and that differs from other subgroups due to certain traits or connections.
Can a supertype instance also be an instance of more than one subtype?It is possible for an instance of a supertype to belong to two or more subtypes at once. A bank has three different kinds of accounts.
To know more about supertype visit:-
https://brainly.com/question/30076090
#SPJ4
You are a network technician for a small consulting firm. One of your users is complaining that they are unable to connect to the local intranet site.
After some troubleshooting, you've determined that the intranet site can be connected to by using the IP address but not the hostname.
Which of the following would be the MOST likely reason for this?
Pilihan jawaban
Incorrect DHCP Configuration
Incorrect DNS settings
Incorrect subnet mask
Incorrect default gateway
The MOST likely reason for the issue where the user is unable to connect to the local intranet site using the hostname, but can connect using the IP address is;
an Incorrect DNS settings.
Domain Name System (DNS) is responsible for resolving hostnames to IP addresses, and if the DNS settings are incorrect or not configured properly, the hostname will not be resolved to the correct IP address.
This will hence result to connection failure.
Therefore, the correct answer is B. Incorrect DNS settings.
Learn more about DNS s:
brainly.com/question/29602856
#SPJ4
the unary scope resolution operator is used: group of answer choices to access any variable in an outer block when a local variable of the same name is in scope. to access a global variable when it is out of scope. to access a local variable with the same name as a global variable. to access a global variable when a local variable of the same name is in scope.
The unary scope resolution operator is used "to access a global variable when a local variable of the same name is in scope". Hence the correct answer is option D, which is "to access a global variable when a local variable of the same name is in scope" .
The scope resolution operator allows the programmer to explicitly indicate which variable they want to access, either the global variable or the local variable. By using the scope resolution operator, the programmer can avoid naming conflicts and ensure that the correct variable is being accessed in the code.
You can learn more about scope resolution operator at
https://brainly.in/question/7770851
#SPJ4
Private variables:
A.are accessible only by the class it was defined in.
B.are accessible only by the class it was defined in, and any class derived from that class
C.are accessible outside the class
Answer:
A.are accessible only by the class it was defined in.
Explanation:
pirate variables are only visible and accessible only inside the class they belong to not outside to any other class or
FILL THE BLANK a ____ error does not prevent the program from running, but causes it to produce incorrect results.
Answer:
Logic Error
Explanation:
Unlike compiler errors, which are caught by the IDE, logic errors are flaws within the program's structure/logic that produces incorrect results while still being able to compile and run the program.
in ‘C’.
Write a program to calculate the total size of all files in the current directory/folder and all sub-folders.
Example:
I have a directory with 1 file (size 150KB) and 2 subdirectories, each of which has 1 file (size 10KB each), then when I run this program on this directory, I expect the answer to be 170KB.
We may sum the sizes of all of the files by iterating over all the folders and subdirectories using the recursive method.
Comparing directories and folders?A directory can hold files, subdomains, and other directories in contrast to a folder, that can only contain hold files. A directory is essentially a system of organizing that enables individuals to store data in a style that makes them simple to find.
How can I determine my directory?The pwd command, which stands meaning Print Working Directory, can be used to find out what directory you are now in. The last folder in the universal path has the title of the currently working directory. For instance, dir2 is the active working directory in the sample from above.
To know more about directory visit:
https://brainly.com/question/1178560
#SPJ4
true/false. project initiation is the second phase of the project management process, which focuses on defining clear, discrete activities and the work needed to complete each activity within a single project.
It is false that project initiation is the second phase of the project management process, which focuses on defining clear, discrete activities and the work needed to complete each activity within a single project.
Project initiation documentation also known as PID is one of the most important steps in the project management process that provides the base for any business project.
The project initiation documentation collects all the information that are important for beginning a project.
Learn more about project initiation documentation here.
https://brainly.com/question/27227030
#SPJ4
assuming you are sally parker, describe the process you will initiate to form the cvro and the protocol for decision making in the network.
The process that will initiate to form the CVRO and the protocol for decision making in the network is:
Identifying potential hazards. Developing response plans and procedures.Organizing training and exercises.Coordinating resources and communication.In terms of decision-making protocols, it is important to establish clear lines of communication, define roles and responsibilities, and prioritize the safety and needs of the community.
It can be helpful to establish a decision-making process that involves consultation and collaboration with community members and relevant stakeholders, as well as a framework for addressing conflicts and resolving issues. The specific protocol can depend on the size and structure of the organization and the needs of the community.
Learn more about Decision making: https://brainly.com/question/13129093
#SPJ4
Consider the following code segment.int total = 0;for (int k = 0; k <= 100; k += 2){total += k;}Which of the following for loops could be used to replace the for loop in the original code segment so that the original and the revised code segments store the same value in total?O for (int k = 1; k <= 101; k += 2){total += k - 1;}O for (int h = k; h >= 0; h--)O private String make;
private String model;
public Car(String myMake, String myModel)
{ / implementation not shown / }O {
total += k - 1;
}
The result of the code segments is the same since the loops in each segment stop when I equals 10.
In what order should the three components of a for loop header be executed?Similar to a While loop, a For loop has three parts: the keyword For, which starts the loop, the condition being tested, and the keyword End For, which closes the loop.
What function is employed to determine the number of columns and rows in an array ?The shape() function in NumPy can be used to determine the number of rows and columns. We pass a matrix into this method, and it returns the matrix's row and column numbers. The number of columns and rows is returned.
To know more about code segments visit:-
https://brainly.com/question/20063766
#SPJ4
in this part, you will create reports, alerts, and dashboards to monitor for suspicious activity against vsi windows server. design the following deliverables to protect vsi from potential attacks by job corp:
By following these steps, you can create a robust monitoring system to detect and respond to potential attacks against VSI Windows Server by Job Corp.
How we take the steps?
Define the scope and objectives of the monitoring: Define the assets you want to protect, the types of attacks you want to detect, and the specific metrics and events that will trigger alerts.
Identify the data sources: Identify the logs, events, and other data sources that contain information about the activities you want to monitor. This could include Windows event logs, system logs, application logs, network traffic logs, and other sources.
Develop monitoring rules: Develop monitoring rules based on the data sources and the objectives you defined. For example, you could create rules to monitor for failed login attempts, suspicious network traffic, or unusual file access.
Create alerts: Set up alerts to trigger when the monitoring rules are violated. These alerts could be in the form of emails, text messages, or push notifications. Make sure to set the appropriate severity levels and notification methods for each type of alert.
Develop dashboards: Create dashboards to visualize the data and alerts from the monitoring system. The dashboards could display real-time data, trend charts, and heat maps to help identify patterns and anomalies.
Test and refine: Test the monitoring system and the alerts to ensure they are working correctly. Refine the rules and alerts as needed to reduce false positives and false negatives.
Monitor and respond: Monitor the dashboards and alerts on a regular basis and respond promptly to any suspicious activity. Develop incident response procedures to handle any potential security incidents.
By following these steps, you can create a robust monitoring system to detect and respond to potential attacks against VSI Windows Server by Job Corp.
To know more about windows visit:
brainly.com/question/13502522
#SPJ4
on one side we have a lot of interconnected hardware and on the other side we have a user that wants to run programs that make use of that hardware. give an example that shows how operating systems sit in the middle of these two sides, bridging this (hardware/user) gap. (note: you can just use the major computer components we discussed in the description, no need to get too low level)
With its control of the computer's memory, an operating system serves as a link between hardware and the user. The hardware does not directly allow the user to access the memory of the computer while
A computer's operating system is a piece of software that acts as a conduit between its users and its hardware. In order for users to execute programmes and carry out operations on the computer, its main purpose is to manage and organise the numerous resources of a computer system, including the memory, processor, input/output devices, and other peripherals. Operating systems offer a layer of abstraction that protects users from the hardware's technical specifications and enables them to communicate with the computer through an intuitive interface. Operating systems are also crucial for the smooth operation of contemporary computer systems since they offer services like security, resource allocation, and process management.
Learn more about operating here:
https://brainly.com/question/14286073
#SPJ4
Which of these method implementations would correctly insert an element into an ArrayList before every even index?public void addEven(ArrayList array, E element) { for(int index = 1; index < array.size(); index++) { if(index %2 == 0) { array.add(index, element); index++; } } }
ArrayList. add() method is used to add an aspect at specific index in Java ArrayList.
Syntax:
Parameters:
Exception: throws IndexOutOfBoundsException which takes place when the index is making an attempt to be accessed which is not there in the allocated memory block. ...
Example:
Implementation
How do you add an issue to an ArrayList?For example, to add factors to the ArrayList , use the add() method:
import java. util. ...
public category Main { public static void main(String[] args) { ArrayList<string> vehicles = new ArrayList<string>(); cars. add("Volvo"); cars. ...
Create an ArrayList to keep numbers (add elements of kind Integer ): import java. util. </string></string>
Learn mo about ArrayList array, E element here;
https://brainly.com/question/16464645
#SPJ1
Windows and macOS both include a number of features and utilities designed for users with special needs. Compare the offerings of each OS. Are there options offered by one OS that is not available in the other? Which OS do you think has the best selection? Can you think of any areas that have not been addressed by this assistive technology? Research software from third-party developers to see if there are other tools that would also be useful. Should these tools be included in the OS? Why or why not?
Both Windows and Mac OS X come with a variety of tools and features made specifically for individuals with particular requirements.
What is operating system?An operating system (OS) is a program that controls how a computer's resources are distributed among its users.
The central processing unit (CPU), computer memory, file storage, input/output (I/O) devices, and network connections are examples of typical resources.
Users with special needs can take advantage of several accessibility features in Windows. As follows:
Screen Reader or Narrator - Microsoft's Narrator is a screen reader that reads the words on the screen aloud, allowing someone to use the computer without being able to see the display.Magnifier - You can use this tool to enlarge text, photos, and other objects without altering the screen's resolution.On-screen virtual keyboards - Using a mouse, a touch screen, or other pointing devices, you can choose the keyboard inputs using the on-screen virtual keyboards.Thus, these are the the offerings of each OS. Are there options offered by one OS that is not available in the other.
For more details regarding operating system, visit:
https://brainly.com/question/6689423
#SPJ9
The clause that says how the rows in the query result should be sorted is Order by. The SQL statement used to take rows out of a table is Delete. The maximum number of clauses in an SQL Select statement is 8
A) The clause that says how the rows in the query result should be sorted is Order by = True
B) The SQL statement used to take rows out of a table is Delete = True
C) The maximum number of clauses in an SQL Select statement is 8 = False
Structured Query Language (SQL), a programming language used for managing data stored in a relational database management system (RDBMS) or for stream processing in a relational data stream management system (RDSMS), is a domain-specific language. When dealing with structured data, which includes relationships between entities and variables, it is especially helpful.
Over earlier read-write APIs like ISAM or VSAM, SQL has two key advantages.It initially proposed the notion of granting access to several records with a single command. It also eliminates the need to say whether or not an index was utilized to find a particular entry.
The maximum number of clauses in an SQL select statement is 6.
Learn more about SQL here
https://brainly.com/question/29841441
#SPJ4
The complete question is:
State for each statement whether it is True or False
A) The clause that says how the rows in the query result should be sorted is Order by.
B) The SQL statement used to take rows out of a table is Delete.
C) The maximum number of clauses in an SQL Select statement is 8.
Spotify interrogated 400 clients and observed that on average, a client streams every week 42 different artists! However, the standard deviation for this number is 15. What is the confidence interval for the true average number of artists listened by all Spotify clients for a 10% alpha risk?
We can say with 90% confidence that the true average number of artists listened by all Spotify clients is between 40.75 and 43.25.
What is standard deviation?The degree of data dispersion from the mean is indicated by the standard deviation.
A low standard deviation implies that the data are grouped around the mean, whereas a large standard deviation shows that the data are more dispersed.
To calculate the confidence interval for the true average number of artists listened by all Spotify clients, we can use the formula:
Confidence interval = sample mean ± (t-value x standard error)
Standard error = 15 / sqrt(400) = 0.75
Next, we need to find the t-value. Since the sample size is 400, we have 399 degrees of freedom.
Using a t-table or a t-distribution calculator with a significance level of 0.10 and 399 degrees of freedom, we find the t-value to be approximately 1.645.
Now, we can plug in the values to get the confidence interval:
Confidence interval = 42 ± (1.645 x 0.75)
Confidence interval = [40.75, 43.25]
Thus, we can state with 90% certainty that between 40.75 and 43.25 artists are actually being listened to on average by all Spotify users.
For more details regarding standard deviation, visit:
https://brainly.com/question/23907081
#SPJ9
A user ____ utilizes standard business software, such as Microsoft Word or Microsoft Excel, which has been configured in a specific manner to enhance user productivity.
Answer
application
configuration
interface
interpolation
A user application makes use of common business applications software like Microsoft Word or Excel that have been specifically set up to increase user productivity.
A user application is a program developed using standardized software and tailored. User interface (UI) design is a method used by designers to develop user interfaces for software or electronic devices with an emphasis on appearance or style.
Graphical user interfaces and other types, such as voice-controlled interfaces, are referred to as "UI design." to the needs of the user that cannot be met by an existing system.UI design, which is frequently confused with UX design, is more focused on the appearance and general feel of a design. In UI design, you, the designer, create a crucial component of the user experience. The complete user experience is covered by UX design. One comparison is to think of UI design as the dashboard and UX design as the automobile.
To learn more about application software click here:
brainly.com/question/14463954
#SPJ4
A technician is installing a SOHO router to an after school community center. The customer would like to keep children from accessing inappropriate while browsing the web.
What actions would help this goal be accomplished?
a. Enable content filtering
b. port forwarding
c. MC address filtering.
Answer:A
Explanation:
Content filtering would allow this to happen.
Port forwarding only allows you to connect to other computers while on a private network. It does not filter out anything.
Assuming you meant MAC Address filtering, this would not solve the issue either. This would only disallow any computer without the specified MAC address to connect to the network.
Therefore, content filtering is the only answer that makes sense.
The given program reads a list of single-word first names and ages (ending with -1), and outputs that list with the age incremented. The program fails and throws an exception if the second input on a line is a string rather than an int. At FIXME in the code, add a try/catch statement to catch ios_base::failure and output 0 for the age.
Ex: If the input is:
Lee 18
Lua 21
Mary Beth 19
Stu 33
-1
then the output is:
Lee 19
Lua 22
Mary 0
Stu 34
Note that the code for the above instructions is given as follows:
#include <iostream>
#include <string>
#include <ios>
using namespace std;
int main() {
string name;
int age;
while (cin >> name && name != "-1") {
try {
cin >> age;
age++;
cout << name << " " << age << endl;
} catch (ios_base::failure& e) {
cout << name << " " << 0 << endl;
}
}
return 0;
}
What is the rationale for the above response?The try/catch statement is used to catch the exception ios_base::failure that is thrown when the second input on a line is not an integer.
If an exception is thrown, the code inside the catch block is executed, which outputs the name and 0 as the age. If no exception is thrown, the code inside the try block is executed, incrementing the age by 1 and outputting the name and the incremented age.
Learn more about code:
https://brainly.com/question/14892473
#SPJ1
The source code of open source code _____.
a. is highly protected and only available to trusted employees and carefully vetted contractors
b. provides capabilities common to organizations and industries
c. serves the needs of a specific industry
d. is available to the public
Open-source software can be developed in a collaborative, public setting. The source code of open-source software is (D) available to the public.
What is open-source code?Open-source software (OSS) is computer software that has been made available under a license that gives users the freedom to use, examine, modify, and share the software and its source code with anybody for any reason.
Software that is open-source may be created in a collaborative, public manner.
Open-source software is a well-known example of this type of collaboration because any competent user is able to engage in its development online, thereby doubling the number of potential contributors.
Public confidence in the software is facilitated by the ability to study the code.
The public has access to open-source code's source code.
Therefore, open-source software can be developed in a collaborative, public setting. The source code of open-source software is (D) available to the public.
Know more about open-source code here:
https://brainly.com/question/15039221
#SPJ4
is done by comparing the input plaintext to the output ciphertext to try to determine the key used to encrypt the information.
A method that compare the input plaintext to ciphertext for determine the key of information is called: linear cryptanalysis.
The process of converting between plaintext, which is readable text, and ciphertext, which is unreadable text, is known as cryptography. This takes place as follows: The sender changes the message's plaintext to ciphertext. Encryption is the name of this step in the procedure. Encoding data is the process of encryption in cryptography. This technique transforms the information's initial plaintext representation into an alternate version known as ciphertext.
Learn more about cryptanalysis: https://brainly.com/question/11352095
#SPJ4
In many programming languages you can generate a random number between 1 and a limiting value named LIMIT by using a statement similar to randomNumber = random(LIMIT). Create the logic for a guessing game in which the application generates a random number and the player tries to guess it. Display a message indicating whether the player’s guess was correct, too high, or too low. (After you finish Chapter 4, you will be able to modify the application so that the user can continue to guess until the correct answer is entered.)
To create a guessing game, the program should generate a random number between 1 and a limiting value, which can be set by the user.
The user should be prompted to input their guess, and the program should compare the user's guess to the randomly generated number. If the guess is correct, the program should display a message congratulating the user. If the guess is too high, the program should display a message indicating that the guess was too high and prompt the user to guess again. Similarly, if the guess is too low, the program should display a message indicating that the guess was too low and prompt the user to guess again. The user should be able to guess multiple times until the correct answer is entered.
learn more about program here:
brainly.com/question/13940523
#SPJ4