No, we cannot use the normal approximation in this scenario.The normal approximation relies on certain conditions being met, such as having a large sample size and a roughly symmetric distribution.
In this case, you flipped a coin 200 times and obtained 85 tails. Since the sample size is sufficiently large (n=200), that condition is met. However, the distribution of coin flips follows a binomial distribution, which is generally not symmetric unless the probability of success (getting a tail) is close to 0.5. In your case, the probability of success is 0.5 (assuming a fair coin), but the number of tails (85) is not close to half of the flips (100). This asymmetry indicates that the binomial distribution is not well-approximated by a normal distribution. Therefore, it would be more appropriate to use the binomial distribution itself or other methods specifically designed for analyzing binomial data, rather than relying on the normal approximation.
Learn more about probability here: https://brainly.com/question/31828911
#SPJ11
How many pounds make a gallon?
iron-59 has a half-life of 44 days. assume you started with 24 mg of iron-59 and 132 days, which is equivalent to 3 half-lives, has passed. how much iron-59 remains?
There would be 3.00 mg of iron-59 remaining. 132 days is equivalent to 3 half-lives because 132/44 = 3. So, we can use the formula to find the amount of iron-59 remaining after 3 half-lives, which is 3.00 mg.
We can use the formula for half-life to determine how much iron-59 remains after 132 days:
Amount remaining = initial amount * (1/2)^(t/h)
Where:
- t is the time that has passed
- h is the half-life of the substance
So, after 132 days, there would be 3.00 mg of iron-59 remaining.
Iron-59 is a radioactive isotope, which means that its nucleus is unstable and will eventually decay into a more stable form. When an isotope decays, it releases energy in the form of radiation (such as alpha, beta, or gamma particles) and transforms into a new element. The half-life of an isotope is the amount of time it takes for half of the initial amount to decay. For example, if you start with 24 mg of iron-59, after one half-life (44 days), you would have 12 mg remaining. After two half-lives (88 days), you would have 6 mg remaining. And after three half-lives (132 days), you would have 3 mg remaining.
To know more about amount visit :-
https://brainly.com/question/17853331
#SPJ11
The cost of CD cases, C, is directly proportional to the number of CD cases, n. The cost of 6 CD cases is $2. 34. Find the cost of one CD case
The cost of one CD case is $0.39.
According to the problem statement, we have the cost of 6 CD cases, which is given as $2.34.
Let’s denote it as follows:C = $2.34, n = 6
We know that the cost of CD cases (C) is directly proportional to the number of CD cases (n).
Therefore, we can use the following formula:k is the constant of proportionality, which can be found by dividing C by n as follows:
k = C/n = $2.34/6 = $0.39
Now that we have found the constant of proportionality (k), we can use it to find the cost of one CD case (C1) by using the following formula:
C1 = k * nC1 = $0.39 * 1C1 = $0.39
Therefore, the cost of one CD case is $0.39.
To know more about cost, click here
https://brainly.com/question/14566816
#SPJ11
Fix a positive integer N and let S:={[aa] E SL2(Z): a,d=1(mod N), b, c = 0(mod N)}. = Then S is a subgroup of SL2(Z).
To show that S is a subgroup of SL2(Z), we need to verify three properties:
Closure: For any two elements [aa] and [bb] in S, their matrix product [aa][bb] should also be in S.
Identity: The identity element [II] should be in S.
Inverses: For any element [aa] in S, its inverse [aa]^-1 should also be in S.
Let's check each property:
Closure: Let [aa] and [bb] be two elements in S. This means a ≡ d ≡ 1 (mod N) and b ≡ c ≡ 0 (mod N). Now, consider their matrix product:
[aa][bb] = [ab+bd ad+bd]
Since a, b, d are congruent to 1 (mod N), and c is congruent to 0 (mod N), the matrix product [ab+bd ad+bd] satisfies the congruence conditions as well. Therefore, [ab+bd ad+bd] is in S, and closure is satisfied.
Identity: The identity element in SL2(Z) is [II]. Let's check if [II] satisfies the congruence conditions in S. We have a = d = 1 (mod N) and b = c = 0 (mod N), which are the required congruence conditions. Thus, [II] is in S, and the identity property is satisfied.
Inverses: For any element [aa] in S, we need to find its inverse [aa]^-1 in S. The inverse of [aa] in SL2(Z) is [a^-1 -b -c d^-1], where a^-1 and d^-1 are the multiplicative inverses of a and d (mod N). Since a ≡ d ≡ 1 (mod N), their inverses exist and are congruent to 1 (mod N). Therefore, [a^-1 -b -c d^-1] satisfies the congruence conditions for S, and the inverse property is satisfied.
Since S satisfies all three properties of a subgroup, we conclude that S is a subgroup of SL2(Z).
Learn more about congruent here: brainly.com/question/32388312
#SPJ11
The area of a square is increasing at a rate of 80 centimeters squared per second. Find the rate of change of the side of the square when it is 8 centimeters. The rate of change of the side is Number cm/sec. In a few sentences, please explain how you got your answer.
The rate of change of the side length when the area is 8 cm² is 5 cm/sec.
The area of a square is given by the formula A = s², where A is the area and s is the length of one side of the square. We are given that the area is increasing at a rate of 80 cm²/sec. Using implicit differentiation, we can find the rate of change of the side length when the area is 8 cm².
dA/dt = 2s(ds/dt)
Substituting in the given values, we get:
80 = 2(8)(ds/dt)
ds/dt = 5 cm/sec
Therefore, the rate of change of the side length when the area is 8 cm² is 5 cm/sec.
Learn more about rate of change here:
https://brainly.com/question/29288224
#SPJ11
A circle has a diameter of 20 cm. Find the area of the circle, leaving
�
πin your answer.
Include units in your answer.
If circle has a diameter of 20 cm, the area of the circle is 100π square centimeters.
The area of a circle can be calculated using the formula:
A = πr²
where A is the area, π (pi) is a mathematical constant that represents the ratio of the circumference of a circle to its diameter (approximately 3.14), and r is the radius of the circle.
In this case, we are given the diameter of the circle, which is 20 cm. To find the radius, we can divide the diameter by 2:
r = d/2 = 20/2 = 10 cm
Now that we know the radius, we can substitute it into the formula for the area:
A = πr² = π(10)² = 100π
We leave π in the answer since the question specifies to do so.
It's important to include units in our answer to indicate the quantity being measured. In this case, the area is measured in square centimeters (cm²), which is a unit of area.
To learn more about area click on,
https://brainly.com/question/19784529
#SPJ1
How many different 5-letter symbols can be formed from the word YOURSELF if the symbol must begin with a consonant and ends with vowel?
There are 24 different 5-letter symbols that can be formed from the word "YOURSELF" if the symbol must begin with a consonant and end with a vowel.
To determine the number of different 5-letter symbols that can be formed, we need to consider the available choices for the first and fifth positions. The word "YOURSELF" has seven letters, out of which four are consonants (Y, R, S, and L) and three are vowels (O, U, and E).
Since the symbol must begin with a consonant, there are four choices for the first position. Similarly, since the symbol must end with a vowel, there are three choices for the fifth position.
For the remaining three positions (2nd, 3rd, and 4th), we can use any letter from the remaining six letters of the word.
Therefore, the total number of different 5-letter symbols that can be formed is calculated by multiplying the number of choices for each position: 4 choices for the first position, 6 choices for the second, third, and fourth positions (since we have six remaining letters), and 3 choices for the fifth position.
Thus, the total number of different 5-letter symbols is 4 * 6 * 6 * 6 * 3 = 24 * 36 = 864.
Learn more about formed here
https://brainly.com/question/28973141
#SPJ11
The sampling distribution of the quantity: (n-1)s^2 / sigma^2 A. a t distribution B. a normal distribution C. an F distribution D. a chi-square distribution
That the sampling distribution of the quantity (n-1)s^2 / sigma^2 is a chi-square distribution.
When we have a sample of size n from a normal population with unknown variance sigma^2, we use the sample variance s^2 as an estimator for the population variance. However, the sample variance s^2 tends to underestimate the population variance sigma^2. To correct for this bias, we use (n-1)s^2 instead of ns^2 as an estimator for sigma^2.
The quantity [tex]\frac{(n-1)s^2}{sigma^2}[/tex] is called the sample variance ratio or the mean square ratio. It measures the ratio of the sample variance to the population variance. It is used in hypothesis testing and confidence interval construction for the population variance.
The distribution of the sample variance ratio is a chi-square distribution with (n-1) degrees of freedom. This means that if we take many random samples of size n from a normal population with unknown variance sigma^2 and calculate the sample variance ratio for each sample, the distribution of these ratios will follow a chi-square distribution with (n-1) degrees of freedom.
Therefore, we can conclude that the sampling distribution of the quantity (n-1)s^2 / sigma^2 is a chi-square distribution.
To learn more about distribution visit:
https://brainly.com/question/31197941
#SPJ11
Thus, the sampling distribution of (n-1)s^2 / sigma^2 is a chi-square distribution with n-1 degrees of freedom, assuming a normal population distribution.
The sampling distribution of the quantity (n-1)s^2 / sigma^2 is a chi-square distribution.
This is because the formula for the sample variance (s^2) involves subtracting the mean from each observation, squaring those deviations, and then summing them up. The resulting sum of squares follows a chi-square distribution with n-1 degrees of freedom. Dividing this sum of squares by sigma^2, the population variance, yields the quantity (n-1)s^2 / sigma^2. Since this is just a scaled version of the chi-square distribution, it also follows a chi-square distribution with n-1 degrees of freedom. It's important to note that this result assumes that the underlying population follows a normal distribution. If the population distribution is non-normal, the sampling distribution of (n-1)s^2 / sigma^2 may not follow a chi-square distribution.In such cases, alternative methods like bootstrapping or permutation tests may be used to estimate the variance.Know more about the chi-square distribution
https://brainly.com/question/28260879
#SPJ11
solve the congruence 4x ≡ 5 (mod 9) using the inverse of 4 modulo 9 found in part (a) of exercise 5
To solve the congruence 4x ≡ 5 (mod 9), we need to find the inverse of 4 modulo 9, which we found in part (a) of exercise 5 to be 7.
Multiplying both sides of the congruence by the inverse of 4, we get:
4x * 7 ≡ 5 * 7 (mod 9)
28x ≡ 35 (mod 9)
Since 28 ≡ 1 (mod 9), we can simplify the left side of the congruence:
x ≡ 35 (mod 9)
Now we need to find the smallest non-negative integer solution for x. We can do this by repeatedly subtracting 9 from 35 until we get a number less than 9:
35 - 9 = 26
26 - 9 = 17
17 - 9 = 8
So x ≡ 8 (mod 9) is the smallest non-negative integer solution to the congruence 4x ≡ 5 (mod 9) using the inverse of 4 modulo 9 found in part (a) of exercise 5.
Learn more about congruence here:
https://brainly.com/question/31992651
#SPJ11
One trampoline has a diameter of 12 feet. A larger trampoline has a diameter of 14 feet. How much greater is the area of the larger trampoline? Use 3.14 for pi and round your answer to the nearest hundredths.
The area of the larger trampoline is 40.82 ft² greater than the area of the smaller trampoline.
How to calculate the area of a circle?The area of a circle of radius r is given by the multiplication of π and the radius squared, as follows:
A = πr²
The radius of the smaller trampoline is given as follows:
6 feet (half the diameter).
Hence the area is given as follows:
A = 3.14 x 6²
A = 113.04 ft².
The radius of the larger trampoline is given as follows:
7 ft.
Hence the area is given as follows:
A = 3.14 x 7²
A = 153.86 ft².
Then the difference of the areas is given as follows:
153.86 - 113.04 = 40.82 ft².
More can be learned about the area of a circle at brainly.com/question/15673093
#SPJ4
1. Which circle does the point (-1,1) lie on?
O (X2)2 + (y+6)2 - 25
0 (x-5)2 + (y+2)2 = 25
0 (x2)2 + (y-2)2 = 25
0 (x-2)2 + (y-5)2 = 25
The given options can be represented in the following general form:
Circle with center (h, k) and radius r is expressed in the form
(x - h)^2 + (y - k)^2 = r^2.
Therefore, the option with the equation (x + 2)^2 + (y - 5)^2 = 25 has center (-2, 5) and radius of 5.
Let us plug in the point (-1, 1) in the equation:
(-1 + 2)^2 + (1 - 5)^2 = 25(1)^2 + (-4)^2 = 25.
Thus, the point (-1, 1) does not lie on the circle
(x + 2)^2 + (y - 5)^2 = 25.
In conclusion, the point (-1, 1) does not lie on the circle
(x + 2)^2 + (y - 5)^2 = 25.
To know more about Circle visit:
https://brainly.com/question/12930236
#SPJ11
determine whether each sequence is convergent or divergent 20,18,148
The required answer is the given sequence 20, 18, 148 is divergent.
To determine whether each sequence is convergent or divergent, we need to examine the given sequence: 20, 18, 148.
A convergent sequence is one in which the terms approach a specific value as the sequence progresses, whereas a divergent sequence does not approach a specific value.
A divergent series is an infinite series that is not convergent, meaning that the infinite sequence of the partial sums of the series does not have a finite limit.
If a series converges, the individual terms of the series must approach zero. Thus any series in which the individual terms do not approach zero diverges. However, convergence is a stronger condition: not all series whose terms approach zero converge. A counterexample is the harmonic series
Step 1: Look for a pattern in the sequence.
The given sequence has three terms: 20, 18, and 148. We notice that the first two terms decrease (20 to 18), but then the sequence increases significantly (18 to 148).
Step 2: Determine if the sequence approaches a specific value.
Since there is no clear pattern in the sequence and the terms do not seem to be approaching a specific value, we can conclude that the sequence is divergent.
Therefore, The given sequence 20, 18, 148 is divergent.
To know more about the divergent. Click on the link.
https://brainly.com/question/31778047
#SPJ11
Plssssssss help pls need thisss
The expression that shows the total area of the shape is 4s²
What is area of shape?The area of a shape is the space occupied by the boundary of a plane figures like circles, rectangles, and triangles.
The shape above consist of 4 equal squares, each sides of the square is 's'. This means that the area of one square will be area of the remaining 3 squares.
Area of a square is expressed as;
A = l²
where l is the side length
area of one square = s × s
= s²
For 4 squares now, the total area will be
s² + s² + s² + s²
= 4s²
Therefore the total area of the shape is 4s²
learn more about area of shape from
https://brainly.com/question/25965491
#SPJ1
Suppose you will perform a test to determine whether there is sufficient evidence to support a claim of a linear correlation between two variables. Find the critical values of r given the number of pairs of data n and the significance level alpha n = 11, a = 0.01
Thus, For n = 11 and alpha = 0.01, the critical values of r are approximately -0.869 and 0.869. These values are the boundaries for determining whether the correlation is significant.
To determine if there is sufficient evidence to support a claim of a linear correlation between two variables, you can perform a hypothesis test using the correlation coefficient, r. The critical values of r will help you decide if the correlation is significant or not.
For a given number of pairs of data (n) and a significance level (alpha), you can find the critical values of r using a table of critical values for the Pearson correlation coefficient or an online calculator.
In your case, you have n = 11 pairs of data and a significance level of alpha = 0.01. Using a table or calculator, you can find the critical values for a two-tailed test.
For n = 11 and alpha = 0.01, the critical values of r are approximately -0.869 and 0.869. These values are the boundaries for determining whether the correlation is significant.
If the calculated value of r falls between these critical values (-0.869 and 0.869), you would fail to reject the null hypothesis, meaning there is insufficient evidence to support a claim of a linear correlation between the two variables.
However, if the calculated value of r is less than -0.869 or greater than 0.869, you would reject the null hypothesis, indicating sufficient evidence to support the claim of a linear correlation at the 0.01 significance level.
Know more about the significance level (alpha)
https://brainly.com/question/30135603
#SPJ11
Give a practical interpretation in words of the function
1) k(g(t)), where L=k(H) is the length of a steel bar at temperature H and H=g(t) is temperature at time t
2) t(f(H)), where t(v) is the time of a trip at velocity v, and v=f(H) is velocity at temperature H
--------------------------------------
Find a simplified formula for the difference quotient --- (f(x+h)-f(x))/h
3) f(x)=x^2 +x
4) f(x)=sqrtx
5) f(x)= 1/x
Function k(g(t)) is used to find length of steel bar at any given time based on the temperature.
Function t(f(H)) is help us to find time taken to travel a certain distance at any given temperature based on velocity.
(f(x + h) - f(x)) / h = 2x + h + 1
(f(x+h) - f(x)) / h = 1 / (√(x+h) +√(x))
(f(x+h) - f(x)) / h = -1 / (x(x+h))
The function k(g(t)) gives the length of a steel bar L, at a certain temperature H, where H is a function of time, g(t).
This means that the length of the steel bar is dependent on the temperature of the bar, which in turn depends on the time.
The function k(g(t)) is used to determine the length of the bar at any given time based on the temperature.
The function t(f(H)) gives the time it takes to travel a certain distance at a given velocity v, where v is a function of temperature H.
The time of the trip is dependent on the velocity of travel, which in turn depends on the temperature.
The function t(f(H)) is used to determine time it takes to travel a certain distance at any given temperature based on the velocity.
The difference quotient for f(x) = x² + x is,
(f(x+h) - f(x)) / h = [(x+h)² + (x+h) - (x² + x)] / h
Simplifying this expression, we get,
⇒ (f(x+h) - f(x)) / h = [(x² + 2xh + h² + x + h) - (x² + x)] / h
⇒ (f(x+h) - f(x)) / h = (2xh + h² + h) / h
⇒ (f(x+h) - f(x)) / h = 2x + h + 1
The difference quotient for f(x) = √(x) is,
(f(x+h) - f(x)) / h = (√(x+h) - √(x)) / h
Multiplying the numerator and denominator by the conjugate of the numerator, we get,
(f(x+h) - f(x)) / h = [(√(x+h) - √(x)) × (√(x+h) + √(x))] / [h × (sqrt(x+h) + sqrt(x))]
⇒ (f(x+h) - f(x)) / h = (x+h - x) / [h × (√(x+h) + √(x))]
⇒ (f(x+h) - f(x)) / h = 1 / (√(x+h) + √(x))
The difference quotient for f(x) = 1/x is,
⇒ (f(x+h) - f(x)) / h = (1 / (x+h) - 1 / x) / h
Multiplying the numerator and denominator by x(x+h), we get,
⇒ (f(x+h) - f(x)) / h = [(x - (x+h)) / (x(x+h))] / h
⇒ (f(x+h) - f(x)) / h = (-h / (x(x+h))) / h
⇒ (f(x+h) - f(x)) / h = -1 / (x(x+h))
Learn more about function here
brainly.com/question/29131247
#SPJ4
The Mosteller formula for approximating the surface area S, in square meters (m2), of a human is given by the function below, where h is the person's height in centimeters and w is the person's weight in kilograms. According to this formula, if a person's weight drops 17%, by what percentage does his or her surface area change? Vhw S(h,w) = 60 Choose the correct answer below. A. It drops by approximately 40%. B. It drops by approximately 20%. C. It drops by approximately 30%. OD. It drops by approximately 10%.
The surface area is changed by around 40% which means It drops by approximately 40%.
Option A is the correct answer.
We have,
To find the percentage change in surface area, we need to calculate the new surface area after the weight drop and then find the percentage difference.
Let the original weight be w, and the new weight after the 17% drop be w(new) = w - 0.17w = 0.83w.
The original surface area.
S(h, w) = √(hw) / 60.
The new surface area.
S(h, w_new) = √(h x 0.83w) / 60.
To find the percentage change, we calculate the difference between the two surface areas and divide it by the original surface area, then multiply by 100:
Percentage Change
= [(S(h, w) - S(h, w(new))) / S(h, w)] x 100
Now let's plug in the formula for surface area:
Percentage Change
= [((√(hw) / 60) - (√(h * 0.83w) / 60)) / (√(hw) / 60)] * 100
= [(√(hw) - √(h * 0.83w)) / √(hw)] * 100
= [0.398w / √(hw)] * 100
= 39.8%
= 40%
Thus,
The surface area is changed by around 40% which means It drops by approximately 40% which is option A.
Learn more about percentages here:
https://brainly.com/question/11403063
#SPJ12
The complete question:
The Mosteller formula for approximating the surface area S, in square meters (m²), of a human is given by the function below, where h is the person's height in centimeters and w is the person's weight in kilograms.
S(h, w) = √(hw) / 60
According to this formula, if a person's weight drops 17%, by what percentage does his or her surface area change?
Choose the correct answer below.
A. It drops by approximately 40%.
B. It drops by approximately 20%.
C. It drops by approximately 30%.
D. It drops by approximately 10%.
let be a square matrix with orthonormal columns. explain why is invertible. what is the inverse?
The inverse of the matrix with orthonormal columns is simply its transpose.
If a square matrix has orthonormal columns, it means that the dot product of any two columns is zero, except when the two columns are the same, in which case the dot product is 1. This implies that the columns are linearly independent, because if any linear combination of the columns were zero, then the dot product of that combination with any other column would also be zero, which would imply that the coefficients of the linear combination are zero.
Since the matrix has linearly independent columns, it follows that the matrix is invertible. The inverse of the matrix is simply the transpose of the matrix, since the columns are orthonormal. To see why, consider the product of the matrix with its transpose:
[tex](A^T)A = [a_1^T; a_2^T; ...; a_n^T][a_1, a_2, ..., a_n]\\ = [a_1^T a_1, a_1^T a_2, ..., a_1^T a_n; \\ a_2^T a_1, a_2^T a_2, ..., a_2^T a_n; ... a_n^T a_1, a_n^T a_2, ..., a_n^T a_n][/tex]
Since the columns of the matrix are orthonormal, the dot product of any two distinct columns is zero, and the dot product of a column with itself is 1. Therefore, the diagonal entries of the product matrix are all 1, and the off-diagonal entries are all zero. This implies that the product matrix is the identity matrix, and so:
(A^T)A = I
Taking the inverse of both sides, we get:
[tex]A^T(A^-1) = I^-1(A^-1) = A^T[/tex]
Therefore, the inverse of the matrix with orthonormal columns is simply its transpose.
learn more about inverse of the matrix
https://brainly.com/question/4017205
#SPJ11
Answer true or false:A linear programming problem may have more than one optimal solution.
True. A linear programming problem may indeed have more than one optimal solution. Linear programming is a method used to determine the best outcome or solution from a given set of resources and constraints.
It involves optimizing a linear objective function, which represents the goal of the problem, subject to a set of linear inequality or equality constraints. In some cases, a linear programming problem can have multiple optimal solutions, which means that there is more than one solution that satisfies the constraints and provides the best possible value for the objective function. This can occur when the feasible region, which is the set of all possible solutions that satisfy the constraints, has more than one point that lies on the same level curve of the objective function. When a problem has multiple optimal solutions, it is said to have degeneracy. Degeneracy can arise due to various reasons, such as redundant constraints or parallel objective function lines. In these situations, any of the optimal solutions can be chosen, as they all yield the same optimal value for the objective function. It is true that a linear programming problem may have more than one optimal solution, and understanding the reasons for degeneracy can help in identifying and selecting the most suitable solution for a specific problem.
Learn more about linear programming here:
https://brainly.com/question/30763902
#SPJ11
Verify that (0, 0) and (10/3,0) are critical points of the following function: f(x, y) = 3x ^ 2 * y + 2x * y ^ 2 - 10xy - 8y ^ 2
Classify these given critical points into relative maximum, relative minimum or saddle
points.
The points (0, 0) and (10/3, 0) are critical points of the function f(x, y) = 3x^2 * y + 2x * y^2 - 10xy - 8y^2. The point (0, 0) is a saddle point, while the point (10/3, 0) is a relative minimum.
To determine the critical points, we need to find the values of x and y where the partial derivatives of the function f(x, y) with respect to x and y are both equal to zero.
Taking the partial derivative with respect to x, we have:
∂f/∂x = 6xy + 2y^2 - 10y
Taking the partial derivative with respect to y, we have:
∂f/∂y = 3x^2 + 4xy - 10x - 16y
Setting both partial derivatives equal to zero and solving, we find two critical points: (0, 0) and (10/3, 0).
To classify these critical points, we can use the second derivative test or evaluate the Hessian matrix. However, in this case, evaluating the Hessian matrix is not necessary. By observing the terms of the function, we can determine that the point (0, 0) is a saddle point because it changes sign when crossing the axes.
For the point (10/3, 0), we can evaluate the function at nearby points to determine its nature.
By plugging in values slightly greater and slightly smaller than 10/3 for x, we find that f(x, y) is positive for x slightly greater than 10/3 and negative for x slightly smaller than 10/3. Therefore, (10/3, 0) is a relative minimum.
Learn more about saddle point here: brainly.com/question/31405597
#SPJ11
S • 41. If US$ 1 is equivalent to $ 47.50, the value of US$7 in Jamaican currency is?
Answer:
your anwser is 1085
Step-by-step explanation:
Write the repeating decimal as a fraction. .1872 72 is a repeating decimal.
The fraction representation of the repeating decimal .1872 72 is 18727/99900.
To express the repeating decimal .1872 72 as a fraction, we can follow these steps:
Let x = .187272...
Step 1: Multiply both sides of the equation by a power of 10 to shift the repeating part to the left of the decimal point. Since there are two digits in the repeating part, we can multiply by 100:
100x = 18.727272...
Step 2: Subtract the original equation from the multiplied equation to eliminate the repeating part:
100x - x = 18.727272... - 0.187272...
99x = 18.54
Step 3: Divide both sides by 99 to isolate x:
x = 18.54 / 99
Simplifying the fraction:
x = 927 / 4950
Therefore, the fraction representation of the repeating decimal .1872 72 is 927/4950.
For more such question on fraction
https://brainly.com/question/17220365
#SPJ11
compute t2(x) at x=0.6 for y=ex and use a calculator to compute the error |ex−t2(x)| at x=−1.5.
t2(0.6) = 0.6² = 0.36. Using a calculator, the error |ex − t2(x)| at x = -1.5 is approximately 2.352.
What are the values of t2(0.6) and the error |ex − t2(x)| at x = -1.5?To compute t2(0.6), we substitute x = 0.6 into the expression t2(x) = x², resulting in t2(0.6) = 0.6² = 0.36.
To determine the error |ex − t2(x)| at x = -1.5, we need to evaluate ex and t2(x) at x = -1.5. Using a calculator, we find that ex ≈ 4.48169 and t2(-1.5) = (-1.5)² = 2.25. Therefore, the error is calculated as |4.48169 - 2.25| ≈ 2.23169.
In summary, t2(0.6) is equal to 0.36, while the error |ex − t2(x)| at x = -1.5 is approximately 2.352.
Learn more about error |ex − t2(x)|
brainly.com/question/12315434
#SPJ11
Let f(n) and g(n) be asymptotically positive functions. Prove or disprove each of the following conjectures. f(n) = 0(g(n)) implies g(n) = O (f(n)). f(n) + g(n) = Theta (min(f(n), g(n))) f(n) = 0(g(n)) implies lg(f(n)) = O (lg(g(n))), where lg(g(n)) greaterthanorequalto 1 and f(n) greaterthanorequalto 1 for all sufficiently large n. f(n) = O (g(n)) implies 2 f^(n) = O (2^g(n)). f(n) = O ((f(n))2). f(n) = O (g(n)) implies g(n) = Ohm(f(n)) f(n) = Theta(f(n/2)). f(n) + o(f(n)) = Theta(f(n)).
The conjectures can be disproven with counterexamples.
Are the given conjectures supported by counterexamples?The first conjecture states that if f(n) = 0(g(n)), then g(n) = O(f(n)). However, this is not true in general. To disprove this, we can consider a counterexample where f(n) = n and g(n) = n^2. Here, f(n) is indeed O(g(n)), but g(n) is not O(f(n)), as g(n) grows faster than f(n).
The second conjecture suggests that if f(n) + g(n) = Theta(min(f(n), g(n))), then it holds true. However, this is not always the case. Counterexamples can be found by considering functions where f(n) and g(n) have different growth rates.
The third conjecture claims that if f(n) = 0(g(n)), then lg(f(n)) = O(lg(g(n))). However, this conjecture is also false. A counterexample can be constructed by taking f(n) = n and g(n) = n^2. While f(n) is indeed O(g(n)), lg(f(n)) is not O(lg(g(n))) as lg(g(n)) grows much faster than lg(f(n)).
The remaining conjectures can be similarly disproven with suitable counterexamples. It is important to note that disproving a conjecture requires finding just one counterexample that contradicts the statement.
Learn more about conjecture
brainly.com/question/11224568
#SPJ11
In ΔMNO, the measure of ∠O=90°, the measure of ∠M=13°, and OM = 9. 6 feet. Find the length of MN
In a right triangle, the right angle is marked as 90°. Here, ∠O is marked as 90°, indicating that the triangle is a right triangle.
Moreover, the length of OM is given as 9.6 feet. The formula used to find the length of the hypotenuse is Pythagoras theorem. The formula is given as c² = a² + b². In a right triangle, the hypotenuse is marked as c, and a and b are the other two sides.
Let's use Pythagoras theorem to find the length of the hypotenuse, MN. MN is the hypotenuse.c² = a² + b²c² = 9.6² + 13²c² = 92.16 + 169c² = 261.16The square root of 261.16 is 16.16. Therefore, the length of MN is 16.16 feet. This is the required solution. In conclusion, using Pythagoras theorem, we can find the length of the hypotenuse of a right triangle if the lengths of the other two sides are given.
Know more about Pythagoras theorem here:
https://brainly.com/question/23936129
#SPJ11
In two factor ANOVA, an F ratio is calculated for each different
sum of squares.
mean square.
factor.
null hypothesis.
In two factor ANOVA, an F ratio is calculated for each different sum of squares.
Specifically, the F ratio is obtained by dividing the mean square for a given factor or interaction by the mean square for error in two factor ANOVA. The sum of squares refers to the total variability that can be attributed to a particular factor or interaction, while the mean square is the sum of squares divided by its degrees of freedom. The F ratio is used to test the null hypothesis that the means of the different groups or levels within a factor are equal, and a significant F ratio indicates that there is evidence of a difference between at least two means.
ANOVA (Analysis of Variance) is a statistical method used to determine whether there are any significant differences between the means of three or more groups of data. ANOVA tests the null hypothesis that there is no difference between the means of the groups, based on the variance within and between the groups. It is often used in experimental research and can help identify factors that may be contributing to observed differences in data.
Learn more about ANOVA here:
https://brainly.com/question/31809956
#SPJ11
Leo bought 3. 5lbs of strawberries that cost $4. 20. How many pounds could Leo buy with the same amount of money if the strawberries cost 2. 80 per pound
Leo could buy 1.5 pounds of strawberries if they cost $2.80 per pound.
How many pounds could Leo buy with the same amount of moneyFrom the question, we have the following parameters that can be used in our computation:
3. 5lbs of strawberries that cost $4.20.
This means that
Cost = $4.20
Pounds = 3.5
For a unit rate of 2.8 we have
Pounds = 4.20/2.8
Evaluate
Pounds = 1.5
Hence, Leo could buy 1.5 pounds of strawberries if they cost $2.80 per pound.
Read more about unit rates at
https://brainly.com/question/19493296
#SPJ4
A farmer wants to have a water pipe installed from the water source to his farmhouse. He has two options. He can have the water pipe follow the rural roads. This option costs $50/m. He can have the water pipe go directly to the farmhouse, through his field. This option costs $40/m. A) What is the cost of running the water pipe directly from the water source to the farmhouse? b) What is the cost of running the water pipe to the farmhouse along the rural roads? (Round your initial answer for the distance to the nearest metre. ) c) Which is the better option? Explain
a) The cost of running the water pipe directly from the water source to the farmhouse is $40/m.
b) The cost of running the water pipe to the farmhouse along the rural roads is $50/m. The better option is the one that minimizes the cost. Thus, the better option depends on the distance between the water source and the farmhouse. If the distance between the water source and the farmhouse is shorter than the length of the route along the rural roads, then it would be better to have the water pipe go directly to the farmhouse.
On the other hand, if the distance between the water source and the farmhouse is greater than the length of the route along the rural roads, it would be better to have the water pipe follow the rural roads. The better option can be calculated as follows:Let d be the distance between the water source and the farmhouse. Then, the cost of having the water pipe go directly to the farmhouse is $40/m. Thus, the cost of this option is $40d. The cost of having the water pipe follow the rural roads is $50/m. Suppose the length of the route along the rural roads is r. Then, by the Pythagorean Theorem, we have:r² = d² + (50 - 40)²r² = d² + 1000r = sqrt(d² + 1000)Therefore, the cost of this option is $50r = $50sqrt(d² + 1000).The better option is the one with the lower cost. If the cost of having the water pipe go directly to the farmhouse is less than the cost of having the water pipe follow the rural roads, then the better option is to have the water pipe go directly to the farmhouse. Otherwise, the better option is to have the water pipe follow the rural roads.
Know more about Pythagorean Theorem here:
https://brainly.com/question/15055785
#SPJ11
Test the series for convergence or divergence: n" n8 + 1 n = 1 convergent divergent
To test the convergence or divergence of the series:
∑(n^2 + 1) / n^8
We can use the p-series test, which states that if the series can be written in the form ∑1/n^p, then it converges if p > 1 and diverges if p ≤ 1.
In this case, we can see that p = 8, which is greater than 1. Therefore, the series converges.
Alternatively, we can also use the limit comparison test. We can compare the given series with a known convergent p-series of the form ∑1/n^7:
lim(n → ∞) [(n^2 + 1) / n^8] / (1 / n^7)
= lim(n → ∞) [(n^2 + 1) / n] * (n^7 / 1)
= lim(n → ∞) [n^9 + n^6] / n
= lim(n → ∞) n^8 + n^5
= ∞
Since the limit is a nonzero value, the series converges by the limit comparison test.
Therefore, the series ∑(n^2 + 1) / n^8 is convergent.
To know about converge and diverge , refer here :
https://brainly.com/question/31778047#
#SPJ11
consider the function f(x)={xif x<11xif x≥1 evaluate the definite integral. ∫08f(x)dx
To evaluate the definite integral [tex]\int\limit {0^{8} fx} \, dx[/tex], we first need to identify the values of the function f(x) in the given interval [0, 8].
Since 0 < 1, we know that f(0) = 0. Similarly, since 8 < 11, we know that f(8) = 8.
Next, we need to evaluate the integral of f(x) over the interval [0, 8]. Since the function f(x) is defined piecewise, we need to split the interval into two parts: [0, 1) and [1, 8].
Over the interval [0, 1), the function f(x) is equal to 0. Therefore, the integral of f(x) over this interval is equal to 0.
Over the interval [1, 8], the function f(x) is equal to x. Therefore, the integral of f(x) over this interval is equal to:
[tex]\int\limits {1^{8} x} \, dx=\int\limit \frac{x^{2} }{2}} 1^{8} = \frac{8^{2} }{2} -\frac{1^{2} }{2}=28[/tex]
So, the answer to the question is 28.
Learn more about integral here:
https://brainly.com/question/18125359
#SPJ11
a piece of equipment is purchased for $100,000. what are the monthly payments if the nominal annual interest (compounded monthly) is 9.25 nd the loan is for four years? (needs: rate, nper, pv)
the monthly payments for the loan are approximately $2,372.51.
To calculate the monthly payments for the loan, we need to use the following formula:
PMT = (r * PV) / (1 - (1 + r)^(-n))
where PMT is the monthly payment, r is the monthly interest rate, PV is the present value of the loan (in this case, $100,000), and n is the number of monthly payments (in this case, 4 years * 12 months/year = 48 months).
To calculate the monthly interest rate, we need to first calculate the nominal annual interest rate, compounded monthly. We can do this using the following formula:
r_nom = (1 + r_eff)^(1/12) - 1
where r_eff is the effective annual interest rate, which is given as 9.25%. Substituting:
r_nom = (1 + 0.0925)^(1/12) - 1 = 0.007449
So the monthly interest rate is 0.7449%.
Now we can plug in the values to the formula for PMT:
PMT = (0.007449 * 100000) / (1 - (1 + 0.007449)^(-48)) = $2,372.51
To learn more about annual interest rate visit:
brainly.com/question/30573341
#SPJ11