Answer:
18.58 mm
Explanation:
Formula for the fringe width is;
β = λL/d
We are given;
λ = 568 nm = 568 × 10^(-9) m
L = 3.5 m
d = 0.107 mm = 0.107 × 10^(-3) mm
β = (568 × 10^(-9) × 3.5)/(0.107 × 10^(-3))
β = 0.01858 m = 18.58 mm
please help!!!
In an electric motor, how do the permanent magnets and the electromagnet
interact?
PLEASE ANSWER FAST
A. The electromagnet causes the permanent magnets to reverse
poles.
B. The permanent magnets reverse the current in the electromagnet.
C. The electromagnet reverses the current in the permanent
magnets.
D. The permanent magnets cause the metal loop in the
electromagnet to turn.
if you don’t know don’t answer
The correct asnwer is D. The permanent magnets cause the metal loop in the
electromagnet to turn.
In an electric motor, the permanent magnets cause the metal loop in the
electromagnet to turn. So, option (D) is correct.
What is electric motor?An electrical device that transforms electrical energy into mechanical energy is an electric motor. The majority of electric motors work by creating force in the form of torque imparted to the motor shaft through the interplay of the magnetic field of the motor and electric current in a wire winding.
In an electric motor, their remains a permanent magnet to produce constant magnetic field. When electric current is passed through the conducting loop, it acts ling electromagnet and begins to rotate. Thus an electric motor works. Hence, option(D) is correct.
To find more about electric motor, refer the link:
https://brainly.com/question/15409160
#SPJ5
10. During 4th period we put Klaudia in a box because she was talking too much. We still heard her voice through the box so we decided to push her outside. The force of friction of the ground on the box was 68 N. If Mr.Whitmore can apply a force of 25 N and every other 7th grade student can apply a force of 6 N. How many students would Mr. Whitmore need to make the box start moving and go outside. (Think quickly, the faster we move the box out, the quicker she stops talking)
Answer: Mr. Whitmore would need 7 or more students ( 7.17) to make the box start moving and go outside
Explanation:
Given that;
friction force of ground box = 68 N
student of 7th grade = n
Whitmore can apply a force of 25 N
every other 7th grade student can apply a force of 6 N.
now
friction force = forced applied by whitmore + total force ny 7th grade student
we substitute
68 = 25 + 6n
6n = 68 - 25
6n = 43
n = 43/6
n = 7.17
Therefore Mr. Whitmore would need 7 or more students ( 7.17) to make the box start moving and go outside
when 10 similar coins are dropped into a graduated cylinder from 75 ml to 100ml. what is average volume of each coin?
Answer:
10,30,40,50 and above
The average volume of each of the coin is 2.5 × 10⁻⁶m³.
Given the data in the question;
Number of coin; [tex]n_c = 10[/tex]Initial volume; [tex]v_1 = 75ml = 7.5*10^{-5}m^3[/tex]Final volume; [tex]v_2 = 100ml = 1.0*10^{-4}m^3[/tex]To determine the average volume of each coin, we calculate change in volume after the coins were dropped into the graduated cylinder.
[tex]\delta V = v_2 - v_1\\\\\delta V = 1.0*10^{-4}m^3 - 7.5*10^{-5}m^3\\\\\delta V = 2.5*10^{-5}m^3\\[/tex]
Hence, [tex]\delta V = volume\ of\ the\ 10 coins[/tex]
Now, volume of each of the coins will be;
[tex]V_{each\ coins} = \frac{\delta V}{n_c} \\\\V_{each\ coins} = \frac{2.5*10^{-5}m^3}{10} \\\\V_{each\ coins} = 2.5*10^{-6}m^3[/tex]
Therefore, the average volume of each of the coin is 2.5 × 10⁻⁶m³.
Learn more: https://brainly.com/question/10196945
Explain the difference between a high tide and a low tide.
Answer: Tidal range
Explanation:
Tides are considering the rise and fall of sea levels and there are two types of it which are called high tide and low tide. The difference between high tide and low tide is called the tidal range.
The tidal range is not constant and it is considering height difference. It can change and it is depending on the locations of the Sun or the Moon.
High tide is the highest level of the place where the water rises because when the water rises to its highest level, then the water is reaching its high tide.When it comes to low tide, then it is the opposite of high tide. Water is reaching its lowest level.
You have to choose one of these Kpop members for the purge, or you can group them into three. Who do you choose, what are their skills, why are they one of the best choices?
- Namjoon
- Wonho
- Felix
- Seonghwa
- Bangchan
- Zico
Answer:
Wonho, Seonghwa, and Bangchan
Explanation:
Answer:
namjoon,seonghwa,bangchan
Explanation:
Drag each item to indicate whether it is a characteristic of dark matter or baryonic matter. (2 points)
Dark Matter
Baryonic Matter
:: has been observed directly
:: interacts with baryonic matter
:: interacts with electromagnetic radiation
has not been observed directly
:: does not interact with electromagnetic radiation
++ does not interact with baryonic matter
Answer:
Dark matter:
- Doesn't interact with baryonic matter.
- It has not been observed directly
- dark matter does not absorb, reflect or even emit light, thereby making it to be extremely hard to spot. Therefore, it does not interact with electromagnetic radiation.
Explanation:
Dark matter:
- Doesn't interact with baryonic matter.
- It has not been observed directly
- dark matter does not absorb, reflect or even emit light, thereby making it to be extremely hard to spot. Therefore, it does not interact with electromagnetic radiation.
Baryonic matter:
- Has been observed directly because it includes nearly all the matter that we see in the world daily.
- It interacts with baryonic matter
- interacts with electromagnetic radiation
Dark Matter:
It has not been observed directly.It does not interact with baryonic matter.It does not interact with electromagnetic radiation.Baryonic Matter:
It has been observed directly.It interacts with baryonic matter.It interacts with electromagnetic radiation.Dark matter can be defined as often invisible substances that are difficult to spot because they don't absorb, emit or reflect light.
Hence, dark matter do not affect human view because they do not interact or interfere with electromagnetic radiation (force).
Although, humans can see right through the (weakly interacting) dark matter but it has not been observed directly.
Baryonic matter can be defined as a dark matter that is made up of baryons such as neutrons, and protons. Also, they are ordinary matter (both fermions and hadrons), as distinct from exotic forms.
In conclusion. baryonic matter has been observed directly and it can interact with electromagnetic radiation.
Read more: https://brainly.com/question/15677526
A nuclear power plant is being built to generate electricity for a large
metropolitan area. Which process will it use?
O A. Nuclear decay of uranium-238
B. Chemical decay of wood
C. Nuclear fission of uranium-235
O D. Combustion of fossil fuels
Answer:
C. Nuclear fission of uranium-235
Answer:
C. Nuclear fission of uranium-235
Explanation:
Give thanks to above me
Why might scientists use a model to show the movement of the continents?
A. The actual movement is too fast.
B. The actual movement is too complex.
C. The actual movement is too dangerous.
D. The actual movement is too slow.
I
HELPPP!!
Answer:
too slow
Explanation:
so its d
To solve this we must be knowing each and every concept related to continent. Therefore, the correct option is option D among all the given options.
What is continent?A huge landmass that is distinguished from other landmasses by seas is referred to be a continent. Seven continents make up the Earth's land mass. Some are connected and split merely by an arbitrary line, while others, like a large island, are completely encircled by sea.
Millions of years is required for the formation of a continent. The lithosphere's separate plates move apart from one another at a pace of three to twenty centimeters (1 to 8 inches) every year. Scientists might use a model to show the movement of the continents as the actual movement is too slow.
Therefore, the correct option is option D among all the given options.
To know more about continent, here:
https://brainly.com/question/14841502
#SPJ5
9. In Millikan's oil drop experiment an oil
drop is held stationary by p.d) of 400 V,
if another drop of double the radius bu
carries same charge is to be held
stationary, the p.d) required is
a) 800 V
b) 1600 V
c) 3200 V
d) 400 V
The strona
A homeowner wants some insulation blown into her attic. The original quote was for 16 cm of R-17 rated insulation. If she wants the attic insulated to R-44, what thickness (in cm) does she need to use
Answer: the value of the required thickness is 41.4 cm
Explanation:
Given that;
R1 = 17
R2 = 44
L1 = 16
L2 = ?
we know that, from thermal conductivity formula
P = 1 / R
P = k / L
1 / R = k / L
since k of a distinct material is constant,
we can take
L / R = constant
L1 / R1 = L2 / R2
L1R2 = L2R1
L2 = (L1 × R2) / R1
so we substitute
L2 = (16 × 44) / 17
L2 = 704 / 17
L2 = 41.4 cm
Therefore the value of the required thickness is 41.4 cm
draw simple vector diagram and resolve 60N at an angle of 30° from the horizontal.. plz help guys
Explanation:
The attatched figure shows the vector diagram for a force that has magnitude of 60 N and it is acting at an angle of 30° from the horizontal.
When it is resolved, the horizontal and vertical components are given by :
[tex]F_x=F\cos\theta\\\\=60\times \cos30\\\\=51.96\ N[/tex]
And
[tex]F_y=F\sin\theta\\\\=60\times \sin30\\\\=30\ N[/tex]
Hence, this is the required solution.
Two balls with masses of 2.0 kg and 6.0 kg travel toward each other at speeds of 12 m/s and 4.0 m/s, respectively. If the balls have a head-on, inelastic collision and the 2.0-kg ball recoils with a speed of 8.0 m/s, how much kinetic energy is lost in the collision
Answer:
The kinetic energy lost in the collision is 48 J
Explanation:
Given;
mass of the first ball, m₁ = 2.0 kg
mass of the second ball, m₂ = 6.0 kg
initial speed of the first ball, u₁ = 12 m/s
initial speed of the second ball, u₂ = 4 m/s
let v be the final velocity of the two balls after the inelastic collision
Apply the principle of conservation of linear momentum;
m₁u₁ + m₂u₂ = v(m₁ + m₂)
2 x 12 + 6 x 4 = v(2 + 6)
48 = 8v
48 / 8 = v
v = 6 m/s
The initial kinetic energy of the balls is calculated as;
K.E₁ = ¹/₂m₁u₁² + ¹/₂m₂u₂²
K.E₁ = ¹/₂(2)(12²) + ¹/₂(6)(4)²
K.E₁ = 144 + 48
K.E₁ = 192 J
The final kinetic of the balls is calculated as;
K.E₂ = ¹/₂(m₁ + m₂)(v²)
K.E₂ = ¹/₂(2 + 6)(6²)
K.E₂ = ¹/₂(8)(6²)
K.E₂ = 144 J
The lost in kinetic energy of the balls is K.E₂ - K.E₁ = 144 J - 192 J = -48 J
Therefore, the kinetic energy lost in the collision is 48 J
sodium is a metal why
Explanation:
Sodium is a chemical element with the symbol Na (from Latin "natrium") and atomic number 11. It is a soft, silvery-white, highly reactive metal. Sodium is an alkali metal, being in group 1 of the periodic table. ... The free metal does not occur in nature, and must be prepared from compounds.
Explanation:
Sodium is an alkali metal, being in group 1 of the periodic table.
1. A book resting on a shelf was found
to have a gravitational potential energy
of 12 J relative to the ground. If the
book falls to the ground, neglecting air
resistance, what is the kinetic energy of
the book just as it was about to hit the
ground?
Answer:
12J
Explanation:
Right before it hits the ground, the initial potential energy and the final kinetic energy will equal each other due to conservation of energy.
difference between incident ray and refracted ray
Answer:
** incident ray.
Incident ray - the ray of light falling on the surface AB is called the incident ray
reflected ray.
** Reflected ray - the incident ray bouncing back in the same medium after striking the reflecting surface is called reflected ray.
A motorcyclist increases the velocity of his bike from 30.0 meters/second to 55.0 meter/second under a constant acceleration of 5.00 meters/second^2. How long does it take the bike to reach the final velocity?
Answer:
Time, t = 5 seconds.
Explanation:
Given the following data;
Initial velocity = 30m/s
Final velocity = 55m/s
Acceleration = 5m/s²
To find the time, we would use the first equation of motion;
[tex] V = U + at[/tex]
Where;
V is the final velocity. U is the initial velocity. a is the acceleration. t is the time measured in seconds.Making time, t the subject of formula, we have;
[tex] t = \frac{V - U}{a}[/tex]
Substituting into the equation, we have;
[tex] t = \frac{55-30}{5}[/tex]
[tex] t = \frac{25}{5}[/tex]
Time, t = 5 seconds.
Therefore, it would take the bike 5 seconds to reach the final velocity.
Why do you need air resistance in a parachute ?what happens without it?
And
How does air resistance affect acceleration and terminal velocity
define paralax error pls
Answer:
Parallax is a displacement or difference in the apparent position of an object viewed along two different lines of sight, and is measured by the angle or semi-angle of inclination between those two lines.
A box of mass 72 kg is at rest on a horizontal frictionless surface. A constant horizontal force F then acts on the box and accelerates it to the right. It is observed that it takes the box 3.4 seconds to travel 13 meters. What is the magnitude of the force
Answer:
[tex]162\ N[/tex]
Explanation:
[tex]We\ are\ given\ that,\\Mass\ of\ the\ box=72\ kg\\Distance/Displacement\ travelled\ by\ the\ box\ during\ the\ application\ of\\ Force=13\ m\\Time\ taken\ for\ it\ to\ displace=3.4 \seconds\\Now,\\As\ we\ know\ that,\\Force=Mass*Acceleration\\In\ order\ to\ know\ force\ we\ need\ to\ know\ the\ acceleration.\ Lets\ find\\ that\ out.\\We\ would\ use\ Newton's\ Third\ Equation\ Of\ Motion\ and\ Newton's\\ First\ Equation\ Of\ Motion:\\2as=v^2-u^2\\v=u+at[/tex]
[tex]Hence,\\First\ lets\ consider\ Newtons\ First\ Equation\ Of\ Motion:\\v=u+at\\v-u=at\\Hence\ now\ lets\ move\ on\ to\ Newton's\ Third\ Law\ Of\ Motion:\\2as=v^2-u^2\\2as=(v+u)(v-u)\\Substituting\ (v-u)=at,\\2as=at(v+u) \\Hence,\ as\ the\ body\ moves\ from\ rest,\ u=0\\So,\\2as=at*v\\Cancelling\ a\ at\ both\ the\ sides\ we\ get,\\2s=vt\\Hence,\\Lets\ plug\ in\ the\ values\ of\ Displacement\ and\ Time,\ Shall\ we?\\Hence,\\2*13=3.4v\\26=3.4v\\\frac{26}{3.4}=v\\v \approx 7.647\ m/s[/tex]
[tex]Now,\\As\ we\ know\ that,\\a=\frac{v-u}{t} [Equation\ for\ acceleration]\\Hence,\\a=\frac{v}{t} [As\ u=0]\\Hence,\\Acceleration=\frac{7.647}{3.4} \\Acceleration \approx 2.25\ m/s^2\\[/tex]
[tex]Hence,\\Now,\\As\ by\ using\ expression\ for\ Force,\\Force= Mass*Acceleration\\Here,\\Force\ exerted\ on\ the\ box=72*2.25= 162 N[/tex]
A 50.0-kg child stands at the rim of a merry-go-round of radius 2.00 m, rotating in such a way that it makes one revolution in 2.09 s. What minimum coefficient of static friction between her feet and the floor of the merry-go-round is required to keep her in the circular path
Answer:
2.01
Explanation:
First, we need to find the centripetal acceleration.
We're given that the merry go round rotates 1 revolution in 2.09 seconds. Converting to rpm, we know that it rotates 30 revolution per minute
Now this speed gotten in rpm will be converted to m/s, to ease the calculation
30 rpm = πdN/60 m/s
30 rpm = (3.142 * 4 * 30)/60
30 rpm = 377.04/60
30 rpm = 6.284 m/s
a(c) = v²/r
a(c) = 6.284²/2
a(c) = 39.49 / 2
a(c) = 19.74 m/s²
F = ma
F = 50 * 19.74
F = 987 N
Also, Normal Force, F(n) =
F(n) = mg
F(n) = 50 * 9.81
F(n) = 490.5
We then use this to find the coefficient of static friction, μ
μ = F/F(n)
μ = 987 / 490.5
μ = 2.01
3 women push a stalled car. Each woman pushes with a 425 N force. What is the mass of the car if the car accelerates at 0.85 m/s2?
Answer:
1500kg
Explanation:
Assuming that the women push the car in the same direction, then the total force is:
Fnet = 425 N ⋅ 3
= 1275 N
To find the mass, we use Newton's second law of motion, which states that,
F = ma
where:
·F is the force applied in newtons
·m is the mass of the object in kilograms
·a is the acceleration of the object in meters per second squared.
So we get:
F
m= ⁻⁻⁻⁻⁻
a
1275N
= ⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻
0.85 m/s²
= 1500 kg
a proton is in a box of width L. what must the width of the box be for the ground level energy to be 5.0 MeV, a typical value for the energy with which the particles in a nucleus are bound
Answer:
Width of a box, [tex]l=6.41\times 10^{-15}\ m[/tex]
Explanation:
The ground level energy of a proton in a box is, E = 5 MeV
[tex]E =5\times 10^6\ eV\\\\=5\times 10^6\times 1.6\times 10^{-19}\\\\=8\times 10^{-13}\ J[/tex]
Energy in a box is given by :
[tex]E=\dfrac{n^2h^2}{8ml^2}[/tex]
For ground state, n = 1
m is mass of proton
h is Planck's constant
l is width of the box
[tex]l^2=\dfrac{n^2h^2}{8mE}\\\\l^2=\dfrac{1^2\times (6.63\times 10^{-34})^2}{8\times 1.67\times 10^{-27}\times 8\times 10^{-13}}\\\\l=\sqrt{\dfrac{1^{2}\times(6.63\times10^{-34})^{2}}{8\times1.67\times10^{-27}\times8\times10^{-13}}}\\\\l=6.41\times 10^{-15}\ m[/tex]
So, the width of the bx is [tex]6.41\times 10^{-15}\ m[/tex].
The width of the box, for the ground level energy with which the particles in a nucleus are bound, is 6.41×10⁻¹⁵ m.
What is the energy in a box?The energy in a box can be calculated with the following formula.
[tex]E=\dfrac{n^2h^2}{8mL^2}[/tex]
Here, (E) is the energy at the nth state, (n) n is the quantum number, (h) is plank's constant and (L) is the width of the box.
The proton is in a box of width L. The width of the box be for the ground level energy to be 5.0 MeV, a typical value for the energy with which the particles in a nucleus are bound.
The energy of the box is at ground level. Then the value of nth state will be 1. It is known that the value of plank's constant is 6.63×10⁻³⁴ m²kg/s.
Put this values in the above formula as,
[tex]8\times10^{-13}=\dfrac{(1)^2(6.63\times10^{-34})^2}{8(1.67\times10^{27})(l)^2}\\l=6.41\times10^{-15}\rm\; m[/tex]
Thus, the width of the box, for the ground level energy with which the particles in a nucleus are bound, is 6.41×10⁻¹⁵ m.
Learn more about the energy in a box here;
https://brainly.com/question/26276150
a guitar string is 0.620 m long, and oscillates at 234 Hz. if a player uses his finger to shorten the string to 0.480 m, what is the new frequency?
Answer:
the new frequency is : 302.25Hz
using the formula F2 = [tex]\frac{F1 L1}{L2}[/tex]
Explanation:
meaning of frequencyfrequency of a string is the number of vibrations of a plucked string per second. it is measured in Hertz.
the frequency of a string is inversely proportional to twice the length of the string. which means the longer the string, the smaller the freqency and the higher the string the higher the frequency.
f ∝ 1/2L.
f = k/2L
where f = frequency
L = length of string
k = constant
k = 2fL is a constant
given data
L1 = 0.62m
f1 = 234Hz
L2 = 0.48m
2f1L1 = 2f2L2
f1L1 = f2L2
f2 = f1L1/L2
f2 = [tex]\frac{234 x 0.62}{0.48}[/tex] = 302.25Hz
in conclusion, the new frequency is 302.25Hz
learn more about frequency of a vibrating string: brainly.in/question/1149252
SPJ2
A mechanic uses a lift to raise an 11,760 N car 0.50m off the ground. How much work does the lift do on the car?
Answer:
5880 JExplanation:
The work done by an object can be found by using the formula
workdone = force × distance
From the question we have
workdone = 11760 × 0.5
We have the final answer as
5880 JHope this helps you
Follow these steps:
A. Place some hot water in the bottom of the bottle and put the ice cube over the opening of the
bottle so that it rests on top and drips into the bottle.
B. Observe carefully what happens over the next 15 minutes. Make a sketch of your experiment
and write down your observations.
Explain your observations using the terms:
condensation
evaporation
solid
Answer:
is this for a project im a little confused
Answer:
Some of the hot water evaporated and became a gas called water vapor and created condensation on the sides of the bottle. It rose to the top of the solid ice cube and the cold cooled the gas turning it back into a liquid.
Explanation:
The angle between incident ray and reflected ray is 60°. What will be the value of angle of incidence and angle of reflection.?
The angle between incident ray and reflected ray is 60 degree. the value of angle of incidence and angle of reflection is 30 degree
Need help ASAP ! Please
what do u need help with here?
What is the longest wavelength that can be observed in the third order for a transmission grating having 5200 slits/cm?
Answer:
641 nm.
Explanation:
Given that,
A transmission grating has 5200 slits/cm.
We need to find the longest wavelength that can be observed in the third order. Using grating equation as follows :
[tex]d\sin\theta=m\lambda[/tex] ...(1)
d is slit spacing
No fo slit per unit length :
[tex]N={5200}\ slit/cm\\\\=520000\ slits/m[/tex]
We know that, N = 1/d
For longest wavelength, θ = 90°
From equation (1)
[tex]\dfrac{\sin\theta}{m\lambda}=\dfrac{1}{d}\\\\520000=\dfrac{\sin(90)}{3\lambda}\\\\\lambda=\dfrac{1}{520000\times 3}\\\\=6.41\times 10^{-7}\ m\\\\=641\ nm[/tex]
Hence, the longest wavelength in third order for a transmission grating is 641 nm.
room's become bright at the day time although there is no bright sunlight in the rooms why
this is give reason
Answer:
The room become bright in the day by a process call scattering of light or Rayleigh scattering.
Explanation:
It is called Rayleigh scattering or scattering of light because Rayleigh scattering is the scattering if light or electromagnetic radiation by smaller particles which have radius of less than 110 nanometer in a medium and the wavelengths of the electromagnetic. Wave or light remain unchanged. The scattering of light occur in the day time in the room and this bring of brighten up of the room.
A pinball machine launches a .045 kg ball at a speed of 9.2 m/s. Determine the potential energy of the spring just before it launched the pinball
Given :
A pinball machine launches a .045 kg ball at a speed of 9.2 m/s.
To Find :
The potential energy of the spring just before it launched the pinball.
Solution :
We know, their is no external force applied on system.
It means that kinetic energy will remains constant.
Initial Energy = Final Energy
[tex]K.E_i + P.E_i = K.E_f + P.E_f\\\\0 + P.E_i= \dfrac{mv^2}{2}+ 0\\\\P.E_i = \dfrac{0.045 \times 9.2^2}{2}\ J\\\\P.E_i = 1.9044\ J[/tex]
Therefore, the potential energy of the spring just before it launched the pinball os 1.9044 J.