The statement which is not true regarding the creation of the WBS for Kick That Ball Sports' new Cricket product line introduction is that rolling wave refers to how all levels of the WBS collectively roll up to reflect the work of the project and only the work of the project. Therefore, the correct option is C.
In the given case, as you are ready to create the WBS, all options but one is true.
The WBS may be structured using each product as a level-one entry. This is true because the WBS (Work Breakdown Structure) is a hierarchical decomposition of the total scope of work to be carried out by the project team to accomplish the project objectives and create the required deliverables.The WBS should be elaborated to a level where costs and schedule are easily estimated. This is known as the work package level. This is also true because work packages are created when the WBS has been elaborated to a level where costs and schedule can be easily estimated.Each level of the WBS represents verifiable products or results. This is also true because each level of the WBS represents a more detailed decomposition of the previous level's deliverables.Rolling wave planning is a technique that uses progressive elaboration to break down the project scope and deliverables into smaller, more manageable pieces. This technique is used to reflect the work of the project as well as the work of the project's product. Therefore, option C is not true because it states that rolling wave planning only reflects the work of the project and not the work of the project's product.Hence option C is not true in reference to creation of the WBS.
Note: The question is incomplete. The complete question probably is: Your company, Kick That Ball Sports, has appointed you as project manager for its new Cricket product line introduction. This is a national effort, and all the retail stores across the country need to have the new products on the shelves before the media advertising blitz begins. The product line involves three new products, two of which will be introduced together and a third one that will follow within two years. You are ready to create the WBS. All of the following are true except for which one? A. The WBS may be structured using each product as a level-one entry. B. The WBS should be elaborated to a level where costs and schedule are easily estimated. This is known as the work package level. C. Rolling wave refers to how all levels of the WBS collectively roll up to reflect the work of the project and only the work of the project. D. Each level of the WBS represents verifiable products or results.
Learn more about WBS:
https://brainly.com/question/3757134
#SPJ11
ethan is a consultant working on a research project for a client. his research has uncovered findings that are counter to what his customer was expecting. these ethical dilemmas could potentially lead ethan to do what?
As a consultant, Ethan is working on a research project for a client. Ethan has found some findings that are counter to what his customer was expecting. These ethical dilemmas could lead Ethan to do job of a consultant.
What is a Consultant?A consultant is a person who provides specialist advice to their clients on specific problems. They provide information, assistance, and guidance on how to improve operations, reduce expenses, and develop new strategies. As a consultant, Ethan is working on a research project for a client. Ethan has found some findings that are counter to what his customer was expecting.
These ethical dilemmas could potentially lead Ethan to the following steps: Discuss the findings with the client: Ethan can sit down with his client and discuss the findings that he has discovered. During the discussion, Ethan should explain his methodology, his results, and the implications of the results. If the client is open to feedback and new information, the discussion should be productive.
Limit the scope of the project: If the findings are problematic, Ethan can consider limiting the scope of the project. If the findings have the potential to harm the client, it might be in the client's best interest to terminate the project. Share the findings with the client's competitors: If the client is not receptive to the findings, Ethan might consider sharing the findings with the client's competitors. This option should only be considered if the client is involved in unethical or illegal activities. Sharing findings with the client's competitors could harm the client's business and could be legally problematic. Therefore, Ethan should only consider this option if he believes it is necessary.
Learn more about Ethical dilemmas here:
https://brainly.com/question/28221102
#SPJ11
_____may analyze how a mother of three children spends her money each month.
_____ may analyze various influences on the unemployment rate.
Sociologists may analyze how a mother of three children spends her money each month.
Sociologists may analyze various influences on the unemployment rate.
In research methodology, sociologists may analyze how a mother of three children spends her money each month and may analyze various influences on the unemployment rate.
Research methodology is the procedure employed by researchers to find solutions to research problems or to achieve specific research objectives. It refers to the techniques and methods used to conduct research, as well as the logic behind them. Sociologists study and research human behavior, customs, and relationships using qualitative and quantitative research methods.
Qualitative research methods aim to identify the meaning behind the data gathered through in-depth interviews, case studies, participant observation, focus groups, and content analysis. Qualitative research examines the relationships between individuals, groups, and organizations and offers researchers an opportunity to study social phenomena in their natural environments.
Quantitative research methods are statistical and structured data-gathering methods that provide numerical information on the prevalence, distribution, and patterns of behavior, attitudes, and opinions. Surveys, questionnaires, experiments, and secondary data analysis are all examples of quantitative research methods.
You can learn more about Research methodology at
https://brainly.com/question/12325082
#SPJ11
the united nations' classification of stages of economic development has been criticized primarily because
The United Nations' classification of stages of economic development has been criticized primarily because it oversimplifies and generalizes the economic conditions and ignores the reality of variations that exist in different countries or regions within a country.
What is the United Nations' classification of stages of economic development?The United Nations has classified countries' economic development into three categories:
developed countries, developing countries, and underdeveloped countries.
-Developed countries are those that have a high standard of living, well-established economies, and advanced infrastructure.
-Developing countries are those that have a relatively low level of industrialization and a moderate standard of living.
-Underdeveloped countries, also known as less developed countries, are those that are behind the developed and developing countries in terms of economic development.
Learn more about Economic development at
https://brainly.com/question/16299816
#SPJ11
gm believes that electric vehicles will provide the company with access to an underserved market. based on what you know about a swot analysis, the electric vehicle market is a(n)
Based on what is known about SWOT analysis, the electric vehicle market can be considered a potential opportunity for GM.
What is the SWOT analysis tool?SWOT analysis is a strategic planning tool used to evaluate the strengths, weaknesses, opportunities, and threats facing a company or organization. Opportunities and threats are external factors that are outside of the company's control, but which can have a significant impact on its success.
In the case of GM, the electric vehicle market represents an opportunity because it is an underserved market that the company believes it can tap into with its electric vehicle offerings. This represents a potential opportunity for GM to grow its market share and increase its revenue and profitability.
Find out more on SWOT analysis at https://brainly.com/question/28506368
#SPJ1
John wants to purchase a car through an online auction site. The auction site offers buyer protection if the transaction begins and ends on the site itself, and if payment is made through the site. However, the seller says that he is in the military and often does not have internet access, so he instructs John to mail him gift cards that cover the total purchase price. John pays, but the car never arrives. Is this fraud? Why or why not? What should John do?
Yes, it's probably fraud. The seller's request for gift cards as payment for the vehicle is highly suspicious and is not an accepted method of payment.
Although John pays, the car never shows up. Is this a scam? If not, why not? What ought John to do?Additionally, any buyer protection that John may have had is nullified because the transaction was carried out outside of the auction site's platform. It is crucial to always carry out transactions through a reliable and trustworthy platform and to never send payments using unconventional means. John must notify the customer support staff of the auction site right away and provide all pertinent information, including the seller's contact information and any correspondence that may have taken place between them. He should also get in touch with the company that issued the gift cards to see if there is any way to get his money back.
To Know more about Fraud Visit:
brainly.com/question/31465304
#SPJ1
if tom were married and his spouse was not working for pay, what would his 2022 taxable income be considering the standard deduction for married couples filing jointly is $25,900?
The standard deduction for married couples filing jointly for the tax year 2022 is $25,900.
What would be Tom 2022 taxable income?Assuming that Tom has no dependents and no other deductions or credits, his taxable income for 2022 would be his total income minus the standard deduction. The taxable income is subject to federal income tax rates that range from 10% to 37%.
Without additional information on Tom's income, we cannot determine his exact taxable income. However, we can calculate the taxable income based on a hypothetical income:
If Tom's total income for 2022 was $80,000 and he is married filing jointly with a non-working spouse, his taxable income would be:
Taxable income = Total income - Standard deduction
Taxable income = $80,000 - $25,900
Taxable income = $54,100
Tom's federal income tax liability would then be calculated based on the tax rates for his taxable income bracket.
Learn more about taxable income from
https://brainly.com/question/23094947
#SPJ1
Answer:
$5,300
Explanation:
MoneySKILL
T/F: for a service business, the revenue reported on an income statement is often compared to two items: total expenses and net income.
The statement "For a service business, the revenue reported on an income statement is often compared to two items: total expenses and net income" is a TRUE statement.
Income statements, also known as profit and loss statements or P&L statements, are a critical part of financial accounting for businesses, both large and small. Service-based businesses that sell knowledge or services instead of physical goods can use these statements to gauge performance, make future predictions, and identify potential areas for improvement. The goal of an income statement is to reveal the organization's net profit or net loss by comparing the revenue produced in a given period with the expenses incurred to generate it.
Learn more about income statement at https://brainly.com/question/15169974
#SPJ11
What the definition of tagged content?
Tagged content is content that has been labeled with one or more keywords, topics, or descriptors. This labeling is done to make it easier for readers to find content related to a particular topic.
Tagged content can be anything from blog posts and articles to images, videos, and audio files. By tagging content, readers can quickly find all content related to a specific topic or keyword. For example, if you tagged all of your blog posts with the keyword “blogging,” readers could easily find all of your blog posts related to blogging by searching for that keyword. Additionally, tagged content can also be used to improve the accuracy of search engine results, as search engines use keywords to match queries with relevant content.
For more such questions on labeling
https://brainly.com/question/25482413
#SPJ11
what is the best description of linkedin? multiple choice a place to debate common issues in business a site to share visuals that are related to your career a website for a network of professional contacts a social media site for old friends a job posting board
LinkedIn is a website for a network of professional contacts.
It is designed to help people connect with potential employers and recruiters, find career opportunities, and network with other professionals in the same industry.
LinkedIn also allows users to share visuals related to their careers, such as a portfolio or images of their work. Additionally, it offers a platform for people to post job openings and discuss common issues in business.
Ultimately, LinkedIn is the premier social networking site for professionals to build meaningful connections.
To know more about LinkedIn click on below link:
https://brainly.com/question/14331694#
#SPJ11
Which depreciation methods allocate the cost of long-term assets based on time?straight-linedeclining-balance
Both the straight-line method and the declining balance method allocate the cost of long-term assets based on time. Here both options are correct.
The straight-line method is a simple and commonly used method of depreciation that allocates the cost of the asset evenly over its useful life. The formula for calculating the depreciation expense using the straight-line method is:
Depreciation Expense = (Cost of Asset - Salvage Value) / Useful Life
The declining balance method is a more accelerated method of depreciation that allocates a larger portion of the asset's cost in the early years of its useful life. This method assumes that the asset will lose more value in the earlier years of its life than in the later years. The formula for calculating the depreciation expense using the declining balance method is:
Depreciation Expense = Beginning Book Value x Depreciation Rate
The depreciation rate for the declining balance method is a multiple of the straight-line rate, which is determined by the useful life of the asset and the chosen rate of depreciation.
To learn more about depreciation methods
https://brainly.com/question/18849296
#SPJ4
Complete question:
Which depreciation methods allocate the cost of long-term assets based on time?
A - straight line
B - declining balance
Which account have negative impact on the Owner's equity A.Water and Electricity. B.Capital. C.Vehicle. D.Rent income.
Answer:
A
Explanation:
, Water and Electricity have a negative impact on the owner's equity as they are considered as expenses, which decrease the owner's equity. Capital, on the other hand, is a positive factor as it represents the owner's investment in the business. Vehicle can also have a positive impact on owner's equity as it is an asset that can generate income or be sold for a profit. Rent income is also a positive factor as it is a source of revenue and increases the owner's equity.
fick psychological services, inc., closes its temporary accounts once each year on december 31. the company recently issued the following income statement as part of its annual report. Fick's statement of retained earnings indicates that a $8,000 cash dividend was declared and paid during the current year. a. Prepare the necessary closing entries on December 31 of the current year. b. If Fick's Retained earnings account had a $90,000 balance on at the beginning of the current year, at what amount should Retained Earnings be reported in the firm's year-end balance sheet dated December 31?
The balance to be reported was $82,000 in the company's December 31 year-end balance sheet.
To close the temporary accounts, the necessary entries on December 31 of the current year would be:
Debit Retained Earnings for $8,000Credit Dividends for $8,000Retained earnings are usually held by the company as a provident fund or business development fund.
If Fick's Retained Earnings account had a $90,000 balance at the beginning of the current year, then its balance should be reported as $82,000 in the firm's year-end balance sheet dated December 31. This is because the $8,000 dividend was declared and paid out during the current year.
Learn more about Retained earnings: brainly.com/question/23549885
#SPJ11
Gold Leaf Computers sources the components for its laptops from various suppliers on the market. The firm pays $100 for processors. $35 for disk drives. $50 for screens, $10 for memory, and $40 for graphics and wireless internet cards. Gold Leaf has determined that it would cost $200 per unit to produce all of the necessary components in its in-house manufacturing facility. In this scenario, Gold Leaf should Multiple Choice o continue to outsource production o vertically integrate, o exit the laptop industry o diversity its activities
Gold Leaf Computers sources the components for its laptops from various suppliers on the market. In order to reduce the production cost of a laptop, Gold Leaf Computers should vertically integrate. Therefore, option B is correct.
Vertical Integration: The process of taking over a company's suppliers and/or distributors to boost a business's efficiency and reduce production costs is known as vertical integration. This can be accomplished either through acquiring a company further up or down the supply chain, or by building up the company's resources in-house in order to perform the necessary functions.
In this scenario, Gold Leaf Computers sources the components for its laptops from various suppliers on the market. The firm pays $100 for processors, $35 for disk drives, $50 for screens, $10 for memory, and $40 for graphics and wireless internet cards. Gold Leaf has determined that it would cost $200 per unit to produce all of the necessary components in its in-house manufacturing facility. It would be more cost-effective to manufacture the components in-house rather than purchasing from suppliers. Therefore, Gold Leaf Computers should vertically integrate.
Learn more about "Suppliers"; https://brainly.com/question/13836623
#SPJ11
The assembly line enabled the Ford Motor company to increase its _________ dramatically, which resulted in lower automobile prices and increased sales
The assembly line enabled the Ford Motor Company to dramatically increase its productivity, which resulted in lower automobile prices and increased sales.
By utilizing a system of standardized parts and mass production, the assembly line allowed for parts to be quickly and efficiently put together, reducing the amount of time needed to assemble each car. This system enabled Ford to produce cars quickly and cheaply, making them more affordable and appealing to consumers.
The introduction of the assembly line also made it possible for Ford to offer a variety of options and customize cars to meet the specific needs of each customer. This increased the appeal of their products and allowed them to grow their market share.
In short, the assembly line enabled Ford to increase their productivity and decrease the cost of their products, resulting in increased sales and profits.
To know more about assembly line click on below link:
https://brainly.com/question/31051492#
#SPJ11
You purchase a drone while on vacation in a country outside the U.S. The drone is registered in the foreign country where you purchased it. Upon returning home:
A) You have 14 days to register the drone in the U.S.
B) You must first de-register the drone in the foreign country and then register it in the U.S.
C) You can leave the drone registered in the foreign country but must register it in the U.S.
The correct answer is B) You must first de-register the drone in the foreign country and then register it in the U.S. According to the Federal Aviation Administration, any drone purchased in a foreign country must be de-registered from the foreign country and registered in the U.S. within 14 days of returning home. This is to ensure that the drone is compliant with the aviation laws and regulations in the U.S.
A drone is an unmanned aerial vehicle (UAV), also known as an unmanned aerial system (UAS), a remotely piloted aircraft system (RPAS), or a drone for short. It is a type of aircraft that does not have a human pilot aboard, instead using a remote control to fly or navigate. A drone's use varies for commercial, scientific, military, and recreational purposes.
For more info about the topic Drones registration check the below link:
https://brainly.com/question/15789398
#SPJ11
describe the concepts of economics and economic activities (ec:001) (cs) determine economic utilities created by business activities
Economic activity refers to any action that generates value and produces goods and services.
The following are some of the basic economic activities that are carried out:
Production: Production is the process of creating goods and services using available resources. It involves converting raw materials into finished goods or providing services to customers.Consumption: It refers to the utilization of goods and services to satisfy human needs and desires. Consumption is done by individuals, firms, or government entities.Distribution: It refers to the process of moving goods and services from producers to consumers. It involves selling and buying of goods and services.Exchange: It refers to the act of trading one commodity for another. It is the process of exchanging goods and services for money and vice versa.Economic utilities are the benefits that people derive from goods and services. The following are the economic utilities created by business activities:
Form Utility: Form utility is created when a business converts raw materials into finished products. For example, a furniture manufacturer adds value to raw timber by producing finished furniture.Time Utility: Time utility is created when businesses deliver products at the right time when the customers need them.Place Utility: Place utility is created when businesses deliver products at a place convenient to customers. For example, online stores allow customers to order products from anywhere and have them delivered to their doorstep.Possession Utility: Possession utility is created when businesses provide products to customers in a way that makes it easy for them to use. For example, a mobile phone manufacturer includes user manuals and provides customer support to enable customers to use their products easily.Learn more about economic utility here: https://brainly.com/question/14729557
#SPJ11
company founders can sell their stock to the public and diversify their investments, reducing risk in their personal portfolios. (advantage or disadvantage)
a public company needs to report its quarterly and annual earnings and ensure that these reports are compliant with sec regulations. (advantage or disadvantage)
it is easier for a publicly traded company to facilitate merger negotiations with an established market price as compared to a privately held firm. (advantage or disadvantage)
public companies have to invest a lot of resources to maintain investor relations.
(advantage or disadvantage)
The followings are advantages and disadvantages of a public company which is as follows.
Advantages:
1. Company founders can sell their stock to the public and diversify their investments, reducing risk in their personal portfolios. This reduces the risk of a single founder holding all the shares and being solely responsible for the company's finances.
2. It is easier for a publicly traded company to facilitate merger negotiations with an established market price as compared to a privately held firm. This is because the public company's shares are easily accessible to potential acquirers.
Disadvantages:
1. Public companies have to invest a lot of resources to maintain investor relations. This includes hiring investor relations personnel, hosting conference calls and investor meetings, and issuing regular financial reports.
2. A public company needs to report its quarterly and annual earnings and ensure that these reports are compliant with SEC regulations. This requires additional resources, including hiring accountants and lawyers to ensure the accuracy and compliance of the reports.
Therefore, the advantages of a public company are diversified investments, and easy facilitation of merger negotiations, while the disadvantages are a high investment for maintaining investor relations and reporting requirements.
To learn more about “ investments” refer to the https://brainly.com/question/24703884
#SPJ11
what has been the economic impact of overhead sprinkler systems on desert areas in the negev desert?
The adoption of overhead sprinkler systems has had a significant positive economic impact on the Negev Desert by increasing agricultural productivity, creating jobs, and enabling the growth of supporting industries.
Overhead sprinkler systems have had a significant economic impact on agriculture in the Negev Desert, which is a desert area located in southern Israel. Prior to the widespread adoption of overhead sprinkler systems, farming in the Negev was limited due to the arid and desert conditions.
The use of overhead sprinkler systems has allowed farmers in the Negev to irrigate crops and increase crop yields, leading to a boost in agricultural productivity and economic growth. In addition, the overhead sprinkler systems have enabled farmers to grow a wider variety of crops, including those that were previously not possible due to the lack of water.
The increased agricultural productivity has also created jobs in the region, particularly in the areas of farming, processing, and distribution. The economic impact has extended beyond the agricultural sector, as increased economic activity has also led to the growth of supporting industries, such as transportation and tourism.
Learn more about overhead sprinkler systems here
brainly.com/question/28602041
#SPJ4
companies include the basic eps on their financial statements because it represents the most likely scenario for earnings per share. why do they include the diluted eps?
Companies include diluted EPS (earnings per share) on their financial statements because it provides a more conservative estimate of the company's earnings per share.
Diluted EPS takes into account the potential impact of all the dilutive securities that the company has issued, such as stock options or convertible bonds, that could potentially be converted into common shares and affect the EPS calculation.
By including diluted EPS, investors can get a more complete picture of the company's earnings potential, especially if there are significant dilutive securities outstanding. Diluted EPS is important because it gives investors a more accurate understanding of the potential impact of all the company's outstanding securities on earnings per share, and helps them make informed decisions about the company's stock.
You can learn more about financial statements at
https://brainly.com/question/26240841
#SPJ11
department xy started the month with 1,000 units in work in process that were 100% complete as to materials and 70% complete as to conversion costs. during the month, 12,000 units were started, and 9,000 units were completed and transferred to department zt. the ending work in process units in department xy are 100% complete as to materials and 40% complete as to conversion costs. equivalent units of production for department xy using fifo costing equals
The materials are 100% complete. The total units for department xy using the FIFO method would be 13,000 units and the units for conversion costs would be 10,600
Conversion costs are production expenses incurred by a business to convert raw materials into finished goods. These expenses can be divided into two categories: direct labor and overhead, including rent, utilities, and depreciation.
Work in process (WIP) is a term used in supply chain management to refer to a stage in the manufacturing process. The period from the beginning of production to the completion of the finished product is referred to as the WIP. WIP refers to products that are in various stages of production at a manufacturing facility.
The materials are considered to be 100% complete for both transferred units and work in process. Hence the total units would be 1,000 + 12,000 = 13,000. For conversion costs, 13,000 - 9,000 = 4,000 units. Hence 4,000×40% = 1,600. Hence the units for conversion costs would be 9,000 + 1,600 = 10,600.
Learn more about conversion costs at:
https://brainly.com/question/28180425
#SPJ11
Which of the following is true about Maven?
- Maven is a project management and comprehension tool.
- Maven provides developers a complete build lifecycle framework.
- Both of the above.
- None of the above.
Maven is a project management and comprehension tool that provides developers a complete build lifecycle framework. Therefore, the correct option is "Both of the above.
"Maven: Maven is a project management and comprehension tool. Maven is built with Java, and it was created by Apache Software Foundation. Maven's key feature is the POM (Project Object Model). It's a metadata file for projects that specifies how they are constructed, their dependencies, and how they are to be constructed. Maven's central function is to construct projects by compiling source code, generating binary archives, and running unit tests, among other things.Maven provides developers a complete build lifecycle framework that includes project development, document creation, testing, and deployment. This framework includes a set of plug-ins that provide preconfigured scripts for different phases of the development lifecycle. The POM (Project Object Model) specifies the plug-ins to be used at each phase of the lifecycle.The correct option is "Both of the above." Maven is a project management and comprehension tool that provides developers with a complete build lifecycle framework.
Read more about management here:https://brainly.com/question/28072798
#SPJ11
suppose farmers can use their land to grow either wheat or corn. the law of supply predicts that an increase in the market price of wheat will cause farmers to:
The farmers can use their land to grow either wheat or corn. The law of supply predicts that an increase in the market price of wheat will cause farmers to increase the supply of wheat and decrease the supply of corn.
What is the Law of Supply?The law of supply is a fundamental principle in economics that describes how prices and quantities of goods sold in markets are related.
The law of supply states that, all other things being equal, an increase in the price of a good will lead to an increase in the quantity of that good supplied, while a decrease in the price of that good will lead to a decrease in the quantity of that good supplied.
Assume that farmers can choose to produce corn or wheat on their farm. The law of supply predicts that an increase in the market price of wheat will cause farmers to increase the supply of wheat and decrease the supply of corn. Therefore, the farmers will stop planting corn and plant wheat instead.
An increase in the price of a good will lead to an increase in the quantity of that good supplied, while a decrease in the price of that good will lead to a decrease in the quantity of that good supplied.
Learn more about law of supply here:
brainly.com/question/8592143
#SPJ11
FIFO Method, Physical Flow, Equivalent Units, Unit Costs, Cost Assignment
Swasey Fabrication, Inc., manufactures frames for bicycles. Each frame passes through three processes: Cutting, Welding, and Painting. In September, the Cutting Department of the Tulsa, Oklahoma, plant reported the following data:
In Cutting, all direct materials are added at the beginning of the process.
Beginning work in process consisted of 41,000 units, 20 percent complete with respect to direct labor and overhead. Costs in beginning inventory included direct materials, $1,215,000; direct labor, $222,000; and applied overhead, $150,000.
Costs added to production during the month were direct materials, $2,575,000; direct labor, $3,471,250. Overhead was assigned using the following information:
Activity Rate Actual Driver Usage
Inspection $150 per inspection hour 4,000 inspection hours
Maintenance $750 per maintenance hour 1,600 maintenance hours
Receiving $300 per receiving order 2,000 receiving orders
At the end of the month, 121,000 units were transferred out to Welding, leaving 14,000 units in ending work in process, or 25 percent complete.
Assume that the FIFO method is used.
Required:
1. Prepare a physical flow schedule.
Swasey Fabrication, Inc.
Physical Flow Schedule
Units to account for: Units, beginning work in process Units started (transferred in) Total units to account for Units accounted for: Units completed and transferred out Units, ending work in process Total units accounted for 2. Calculate equivalent units of production for direct materials and conversion costs.
Equivalent Units
Direct Materials Conversion Costs 3. Compute unit cost. Round unit costs & final answer to three decimal places.
$ per unit
4. Calculate the cost of goods transferred to Painting at the end of the month. In your calculations, round unit costs to three decimal places. Round your final answer to the nearest dollar.
$
Calculate the cost of ending inventory. In your calculations, round unit costs to three decimal places. Round your final answer to the nearest dollar.
$
1. Physical Flow Schedule
Swasey Fabrication, Inc.
Physical Flow Schedule
Units to account for:
What is account?An account is a record of financial transactions for a specific entity such as an individual, business, or organization. An account typically lists all credits (money received) and debits (money spent) and may also show the current balance. Accounts may be used to track income, expenses, assets, liabilities, and equity.
Units, beginning work in process: 41,000
Units started (transferred in): 186,000
Total units to account for: 227,000
Units accounted for:
Units completed and transferred out: 121,000
Units, ending work in process: 14,000
Total units accounted for: 135,000
2. Equivalent Units
Equivalent Units
Direct Materials: 227,000
Conversion Costs: 135,000
3. Unit Cost
Unit Cost
Direct Materials: $ per unit: $11.31
Conversion Costs: $ per unit: $26.00
4. Cost of Goods Transferred to Painting at the End of the Month
Cost of Goods Transferred to Painting at the End of the Month
Direct Materials: 121,000 x $11.31 = $1,364,510
Conversion Costs: 121,000 x $26.00 = $3,146,000
Total Cost of Goods Transferred to Painting at the End of the
To learn more about account
https://brainly.com/question/29311564
#SPJ1
An account is a record of financial transactions for a specific entity such as an individual, business, or organization. An account typically lists all credits (money received) and debits (money spent) and may also show the current balance. Accounts may be used to track income, expenses, assets, liabilities, and equity.
Units to account for:Beginning work in process inventory 41,000.
Units started during the month (transferred in) 121,000.
Total units to account for 162,000.
Units accounted for:Units completed and transferred out 121,000.
Ending work in process inventory 14,000.
Total units accounted for 135,000.
The physical flow schedule shows that 135,000 units were accounted for in the Cutting Department during September.
2. Equivalent Units
Equivalent Units
Direct Materials: 227,000
Conversion Costs: 135,000
3. Unit Cost
Unit Cost
Direct Materials: $ per unit: $11.31
Conversion Costs: $ per unit: $26.00
4. Cost of Goods Transferred to Painting at the End of the Month
Cost of Goods Transferred to Painting at the End of the Month
Direct Materials: 121,000 x $11.31 = $1,364,510
Conversion Costs: 121,000 x $26.00 = $3,146,000
Total Cost of Goods Transferred to Painting at the End of the
To learn more about account, visit:
https://brainly.com/question/22917325
#SPJ1
Research shows that most managers vary between two or three decision-making styles, and that decision-making styles vary across occupations, job level, and countries.
True or False
It is True.
Research does show that most managers vary between two or three decision-making styles, and that decision-making styles vary across occupations, job level, and countries. Research has shown that there are two main decision-making styles used by managers: directive and participative.
Directive decision-making style is where the manager makes decisions on their own and dictates to their subordinates what must be done. This style is often used in situations where decisions need to be made quickly. On the other hand, participative decision-making style is where the manager involves their subordinates in the decision-making process by seeking their input and opinions before making a decision. This style is often used when decisions require more thought and when the input of multiple stakeholders is required.
Decision-making styles vary across occupations, job level, and countries depending on the specific organization's culture, the industry they are in, and the country they are operating in. For example, in some organizations, the directive decision-making style may be preferred due to the hierarchical structure while other organizations may prefer the participative style. Similarly, some jobs may require a more directive style while others may require a more collaborative approach. Additionally, different countries may prefer different decision-making styles depending on the cultural norms of the country.
For more questions on "Decision-Making Styles" :
https://brainly.com/question/14851825
#SPJ11
In the long run, according to the quantity theory of money and the classical macroeconomic theory, if velocity is constant, then _____ determines real GDP and _____ determines nominal GDP.
A) the productive capability of the economy; the money supply
B) the money supply; the productive capability of the economy
C) velocity; the money supply
D) the money supply; velocity
According to the quantity theory of money and the classical macroeconomic theory, if velocity is constant, then the money supply determines nominal GDP, and the productive capability of the economy determines real GDP. The correct answer is option B).
What is the Quantity theory of money?The quantity theory of money is a classical macroeconomic theory that focuses on the relationship between money and inflation in the long run. According to this theory, changes in the money supply are proportional to changes in the price level when other variables remain constant.
What is Classical Macroeconomic Theory?Classical macroeconomic theory, also known as classical economics, is a school of thought that emphasizes the role of economic policy in managing economic fluctuations. It is based on the idea that economic growth and stability can be achieved through the application of sound fiscal and monetary policies, as well as the free operation of markets and competition.
Therefore, the correct answer is option B).
Learn more about money supply here:
brainly.com/question/3625390
#SPJ11
The Austin folder contains two shapefiles showing dog off-leash areas as points and polygons. Both have coordinate problems. Describe the problem for each; then fix them and create a map showing both the points and the polygons with a backdrop of the major transportation arteries in Austin. (Hint: Open ArcMap and load arteries first, in order to be able to compare the other data sets against it.) capture the map.
To create a map showing both the points and the polygons with a backdrop of the major transportation arteries in Austin, the Austin folder containing two shapefiles needs to be fixed. The problem for each of the shapefiles should be described; then fixed. Here are the steps to create the map:
Step 1: Open ArcMap and load arteries first, in order to be able to compare the other datasets against it.
Step 2: Load the shapefile that shows dog off-leash areas as points. However, both have coordination problems.
Step 3: For the points shapefile, go to the Geoprocessing menu and then go to the data management tools.
Step 4: Select the Project tool under data management tools and set the input and output coordinates in the appropriate coordinate system for Austin. For instance, NAD_1983_UTM_Zone_14N.
Step 5: After you have done that, click OK and wait for the shapefile to be projected.
Step 6: After the projection, drag the projected shapefile into the new map.
Step 7: Next, load the shapefile that shows dog off-leash areas as polygons.
Step 8: For the polygons shapefile, go to the Geoprocessing menu and then go to the data management tools.
Step 9: Select the Project tool under data management tools and set the input and output coordinates in the appropriate coordinate system for Austin. For instance, NAD_1983_UTM_Zone_14N.
Step 10: After you have done that, click OK and wait for the shapefile to be projected.
Step 11: After the projection, drag the projected shapefile into the new map.
Step 12: Adjust the appearance and symbology of the shapefiles.
Step 13: Lastly, add the base map of Austin's major transportation arteries as a backdrop for the new map.
Step 14: Save and export the new map as an image file.
learn more about the steps to create a map here:
https://brainly.com/question/21304294
#SPJ11
Budgets can be used as guidlines for counting and recording income and expenditures, many fiscal and other public policy functions can also be severed through budgeting including:
In the following question, among the conditions given, Budgets can be used as guidelines for counting and recording income and expenditures, many fiscal and other public policy functions can also be served through budgeting including:1. Resource allocation, 2. Planning for the future, 3. Performance evaluation, 4. Coordination and communication
Budgets are an essential element of the decision-making process for any organisation, whether for-profit or non-profit. Budgeting provides a framework for organisations to plan and control their finances. Budgets may be used to allocate resources, monitor performance, and measure progress toward objectives.To achieve these objectives, budgets serve the following public policy functions:
Resource allocation Budgets are used to allocate resources among various programmes, projects, or activities, enabling organisations to make informed decisions about which initiatives to pursue and how much money to devote to each. Budgets assist to identify, prioritise, and allocate resources to programmes, projects, or activities that are in line with the organisation's strategic goals.Planning for the future Budgets provide a foundation for long-term planning by outlining the resources required to accomplish the objectives, as well as anticipated income and expenditures. Budgets enable organisations to plan for the future by providing a clear picture of how much money they will need to operate, what they will spend money on, and how much revenue they can expect to generate. This allows organisations to adjust their operations and strategy based on economic conditions, changing customer needs, and other factors.Performance evaluation Budgets provide a basis for evaluating performance by comparing actual outcomes to budgeted results. By comparing actual outcomes to budgeted results, organisations may assess whether they are on track to achieve their objectives, identify areas where they are over- or under-spending, and make necessary adjustments. Performance evaluation provides valuable feedback for organisations, allowing them to refine their processes and operations, improve their performance, and enhance their decision-making capabilities.Coordination and communicationBudgets provide a framework for coordinating activities among various departments or functions within the organisation, as well as communicating with external stakeholders such as suppliers, customers, or shareholders. Budgets provide a common language for discussing financial matters, enabling stakeholders to better understand the organisation's financial health, objectives, and priorities. Coordination and communication are critical to achieving the organisation's strategic goals, and budgets provide a valuable tool for facilitating these activities.For more such questions on Budgets
https://brainly.com/question/24940564
#SPJ11
Consolidating entries (market value differs from book value)Assume that on January 1, 2013, an investor company acquired 100% of the outstanding voting common stock of an investee company. The following financial statement information was prepared immediately after the acquisition and presents the acquisition-date balance sheet for the pre-consolidation investor company, the investee company and the consolidated financial statements for the investor and investee.Invest Investee ConsolidatedCash & receivables $500,000 $62,500 $562,500Inventory 375,000 156,250 531,250Property & equipment $1,437,500 $500,000 2,000,000Investment in investee $437,500 _ _Identifiable intangible _ _ 68,750Goodwill _ _ 30,000Total assets $2,750,000 $718,750 $3,192,500Current liabilities $250,000 $125,000 $375,000Accrued expenses 187,500 _ 187,500Bonds payable _ $312,500 317,500Common stock 1,043,750 62,500 1,043,750Additional paid-in capital 893,750 78,125 893,750Retained earnings 375,000 140,625 375,000Total liabilities and equity $2,750,000 $718,750 $3,192,500In preparing the consolidated financial statements, what is the amount of the debit or credit made to the "investment in investee" account as part of the [A] consolidating entry? (Recall from the chapter that the [A] consolidating entry reclassifies the acquisition accounting premium from the investment account to the individual net assets that require adjustment from book value to fair value.)A. $30,000B. $161,250C. $156,250D. $437,500
When preparing the consolidated financial statements, the investment in investee account requires a debit of $437,500 as part of the consolidating entry.
A consolidation elimination journal is a journal specially created by a company to eliminate or eliminate all reciprocal account balances between its headquarters and subsidiaries or branches. A consolidated report is a report that allows multiple investors to get a complete picture of the parent company.
This debit reclassifies the acquisition accounting premium from the investment account to the individual net assets that require adjustment from book value to fair value. Therefore the correct answer is D. $437,500.
Learn more about Consolidating entries: brainly.com/question/14331344
#SPJ11
given the following data from a comparative competitive efforts page in the cir: wholesale segment your company industry average your company vs. ind. avg. wholesale price ($ per pair) $58.75 $53.83 9.1% s/q rating (1 to 10 stars) 8.3 6.3 31.7% model availability 250 300 -16.7% brand advertising ($000s) 16,500 14,350 15.0% rebate offer ($ per pair) 3.00 3.40 -11.8% delivery time (weeks) 2 wks 2.8 wks -28.6% retailer support ($ per outlet) 4,500 4,675 -3.7% retail outlets 1,698 1,538 10.4% celebrity appeal 60 111 -45.9% brand reputation (prior-year average) 87 79 10.1% pairs demanded 2,198 2,413 29.7% gained/lost (due to stockouts) 9 0 pairs sold (000s) 2,207 2,413 -8.5% market share (%) 9.1% 10.0% -0.9 pts based on the above data for your company, which of the following statements is false?
The statement "Pairs required" grew by 29.7% is inaccurate based on the information provided.
What does benchmarking the industry standard mean?What Is a Benchmark Study Comparing Your Company to the Industry Average CFOs, executives, and analysts frequently utilise industry benchmarking reports as comparative analysis tools to compare their own company's performance to that of a select group of competitors.
Which of the following is not a benchmarking objective?The right response is stealing concepts. Beating industry norms, becoming the best in the world, learning from success, and being national leaders in terms of quality and performance are the goals of benchmarking.
To know more about inaccurate visit:-
https://brainly.com/question/25496769
#SPJ1
concord corporation had 117,600 shares of stock outstanding on january 1, 2025. on may 1, 2025, concord issued 67,200 shares. on july 1, concord purchased 10,080 treasury shares, which were reissued on october 1.
By issuing 67,200 shares, Concord Corporation's total number of outstanding shares grew from 117,600 to 184,800. After purchasing 10,080 treasury shares, it dropped to 174,720.
What goes into calculating diluted earnings per share?Diluted earnings per share (EPS) is calculated by taking a company's net income, deducting any preferred dividends, and dividing the result by the weighted average number of shares outstanding plus diluted shares.
Which of the following is true about the calculation of diluted earnings per share?Response and justification We largely take into account the following information when determining diluted earnings per share: the weighted average number of outstanding ordinary shares. the total amount of preferred share dividends declared.
To know more about purchasing visit:-
https://brainly.com/question/31035675
#SPJ1