1. Ivan pulls a sled loaded with logs to his cabin in the woods. He pullsutbiq si
with a force of 800 N at an angle of 20° above the ground.
a. Draw a free-body diagram of the 4 major forces acting on the
sled. Label each force appropriately.

1.54 is the acceleration of the crate. The Second Newton's law states that an object acquires acceleration when an external unbalanced net force is applied to it.

That acceleration is proportional to the net force and inversely proportional to the mass of the object. It can be expressed with the formula: Where, Fn = Net force, m  = mass. The m=200 kg crate is pushed horizontally with a force Fa=700 N. The friction force opposes the motion and a horizontal net force appears causing the acceleration.

The forces in the vertical direction are in balance since the crate does not accelerate in that direction, thus the weight and the normal force are equal: N = W = mg, The friction force can be calculated by using the coefficient of friction μ: μ*n. Calculating the normal force: N = 200 * 9.8 = 1,960 N. The friction force is f=0.2*1960, f=392. The horizontal net force is 308. Finally, the acceleration is computed: m/s^2

To know more about the acceleration visit:-

brainly.com/question/13821209

#SPJ4

The plane's speed at the end of 10.0 seconds is 200 m/s and the distance it has travelled is 1750 meters.

The initial speed of the plane, u = 150 m/s

Acceleration of the plane, a = 5 m/s²

Time, t = 10 sec

We can find the plane's speed at the end of 10. 0 seconds by the formula

a = (v - u)/ t

⇒5 = (v - 150)/ 10

⇒50 = v - 150

⇒v = 150 + 50

⇒v = 200 m/s

Now, to find the distance it has travelled we will use the kinematic equation

v² = u² + 2as

⇒200² = 150 ² + 2 × 5 × s

⇒40000 = 22500 + 10s

⇒17500 = 10 s

⇒s = 1750 m

To know more about kinematic, here

https://brainly.com/question/28037202

#SPJ4

By calculating carbon emissions reduction and sustainability index improvement, the Accenture MyNav Green Cloud Advisor incorporates sustainability when moving client data centers to the cloud.

The availability of computer system resources without the user having to manage them directly is referred to as cloud computing. The network of remote servers located on the internet in this instance aids in the management and storage of the data.

Mynav Green Cloud Advisor is essential since it aids businesses in creating cloud solutions that may be utilized to lower carbon emissions.

As cloud solutions are essential to businesses, Accenture MyNav Green Cloud Advisor integrates sustainability.

To learn more about Accenture and sustainability from given link

https://brainly.com/question/24918185

#SPJ4

The area below the force curve on a force versus time graph is known as the impulse.

The concept of "impulse" refers to how much of an impact a force has over time. The cricket batsman striking the ball is one of the most well-known and frequently used illustrations. The bat significantly changes the ball's trajectory despite making contact with it for a relatively brief period and launching a bicycle. Everyone occasionally makes rash decisions, particularly when we're young. In general, as we get older, we learn to control our urges. It might or might not be a sign of a problem. A mental health concern may be indicated by persistently impulsive behavior.

Learn more about impulse here:-

https://brainly.com/question/2193212

#SPJ4

The airplane that starts from rest and accelerates at 1 constant 3 m/s2 for 30 s before leaving the ground moved by the distance of 1350m.

Acceleration is given as 3.00 m/s2

Time is 30 sec.

The formula we can use in this case is:

s = ut + 0.5 at^2

v = at + u

where,

s is distance travelled

u is initial velocity = 0 since at rest

t is time travelled

a is acceleration

v is the final velocity when it took off

a. s = 0 + 0.5 * 3 * 30^2

s = 1350 m

The distance moved by the airplane is 1350 m.

To know more about acceleration:

brainly.com/question/28743430

#SPJ4

This is not a gamma radiation because there is a change in the atomic number of the daughter nucleus. It is rather a beta decay.

We have to note that when we talk about a decay we are talking about the manner that we can be able to break up the atom of a radioactive substance so that we can be able to produce a new substance.

We can see now that what we have here is the loss of a beta ray or an electron from the specie that is shown. This is evidenced by the change in the atomic number of the daughters nucleus.

Learn more about radioactive decay:https://brainly.com/question/1770619

#SPJ1

The greater the mass of an object, the more particles there are in the sample and the more thermal energy it possesses at the same temperature. Assume you have some boiling hot water at 100 degrees Celsius to demonstrate this concept.

The energy contained inside a thermodynamic system is quantified as the quantity of energy required to get the system from its standard internal state to its current internal state of interest, accounting for energy gains and losses owing to changes in its internal state, including magnetization.  

It eliminates the kinetic energy of motion and the potential energy of the system's overall location in relation to its surroundings and external force fields.

Learn more about internal energy  to visit this link

https://brainly.com/question/11278589

#SPJ4

The rate of acceleration at which Matt goes down the slide is equal to 5.32 m/s².

The normal force or [tex]F_{N}[/tex] acts perpendicular to the object.

The angle of inclination = 35°

cosθ = [tex]F_{N}[/tex]/mg

 [tex]F_{N}[/tex] = mgcosθ = 85 × 10 × cos 35

= 850 × 0.819 = 696.15 N

To find the force of friction,

μ = 0.050

[tex]F_{f}[/tex] = μ × [tex]F_{N}[/tex]

= 0.050 × 696.15 = 34.80 N

To find the downward component of weight that pulls him down the slide.

sinθ = [tex]F_{d}[/tex]/mg

[tex]F_{d}[/tex] = mgsinθ

= 85 × 10 × sin35

= 850 × 0.5736 = 487.56 N

To find the acceleration,

[tex]F_{net} = F_{d} - F_{f}[/tex]

 = 487.56 - 34.80 = 452.76 N

To solve for acceleration,

F = force = 452.76 N

m = mass = 85 kg

Force = mass × acceleration

a = F/m = 452.76/85 = 5.32 m/s²

To learn more about force here

https://brainly.com/question/1046166

#SPJ4

32. 6 kg m/s will be the total momentum of the system before the collision.

In physics, a collision is any circumstance in which two or more bodies rapidly apply forces to one another.

Despite the fact that the most common usage of the word "collision" relates to instances in which two or more objects smash violently, the scientific usage of the word makes no such assumptions.

If most or all of the total kinetic energy from the collision is lost (dissipated as heat, sound, etc., or absorbed by the objects themselves), the collision is said to be inelastic; such collisions result in the objects coming to a complete stop. A collision involving a car serves as an example of this type of collision since cars fold inward rather than colliding with one another.

pf = Final momentum of the system = 32.6 kg m/s

According to the principle of conservation of angular momentum we have

pi = pf => pi = 32.6 kg m/s

The wall is not moving so the initial and final momentum of the system are equal.

Therefore, the total momentum of the system before the collision is 32.6 kg m/s

To learn more about collision refer to:

brainly.com/question/24915434

#SPJ4

The frequency of the red light emitted by a neon sign with a wavelength of 659.9 nm is 4.5×10^14 Hz.

The frequency is the number of times a recurring occurrence takes place during a predetermined period. For example, if an event occurs twice in one second, then the frequency is 2 Hz (Hertz).

A recurring event's frequency is the number of times it happens in a predetermined period. For example, a frequency of a wave is the number of wave peaks passing a fixed point in one second.

The frequency is the number of times something occurs in a given period. For example, the frequency of a radio station is the number of times it broadcasts a signal per second.

Given:

Wavelength = 659.9nm

Speed of light = 3×10^8 m/s

Frequency = speed of light / wavelength

Frequency = (3.0 x 10^8 m/s) / (659.9 nm)

Frequency = 4.5 x 10^14 Hz

To know more about frequency visit:

brainly.com/question/29213586

#SPJ4

Yes, the center of the Milky Way is the most densely populated area of stars, and is therefore the most likely region to find newly formed stars.

What is the populated?

Populated refers to an area that has a large number of people residing in it. It is usually used to describe cities, towns, or other densely populated areas. Populated areas usually contain a variety of services and infrastructure to support their populations, such as schools, hospitals, transport links, and other amenities. Populated areas usually have higher rates of crime, pollution, and other problems associated with increased human activity.Populated refers to an area that has a high density of people living in it. It is usually used to describe cities and towns, but can also describe smaller areas, like neighborhoods.

To learn more about populated

https://brainly.com/question/13045510

#SPJ4

The astronaut being pushed back into his seat as the rocket accelerates - this was the  example of Newton's first law of motion.

According to Newton's First Law, a body in uniform motion or at rest will remain in that state up to and unless a net external force acts on it.

When the astronaut  worked at the space center launching rockets, no force is worked on him. When the rocket accelerates, according to  Newton's first law of motion, the astronaut remains in same motion, that's why, he pushed back into his seat .

Learn more about s Newton's first law of motion here:

https://brainly.com/question/29775827

#SPJ1

R= 2+4=6Ω

in series connection, same current and different voltage

total voltage= total current × total resistance

6=I×6

I=6/6= 1A

voltage across 4Ω resistor= 1×4=4v

Therefore, heat dissipated by the 4Ω resistor in 5s= (v²/R)×t= (4²/4)× 5 = 16/4 × 5 = 20J

The electron feels a force upward as it passes between the charged plates and narrowly avoids striking the top plate. It just misses the to plate by a small amount as it moves higher.

The proton will accelerate less and miss the plates since it is more massive. We once more utilise the kinematic equation to determine the vertical displacement when it occurs for the plates.

y=1/2at²=1/2eE/mp(1.25×10-8s)

² \s=2.73×10-6m

As stated in (b), the proton won't collide with one of the plates because, despite the fact that the electric force felt by the proton and the electrons is identical, the electric force produces a smaller acceleration than g, making it plausible to disregard gravity.

To learn more about electron visit:

brainly.com/question/1255220

#SPJ4

A Shuttle astronaut is sent to repair a defective relay in a 600. 00- kg satellite that is traveling in space. The combined velocity when the astronaut grabs hold of the satellite is 17,004.4 m/s.

The combined velocity of the astronaut and the satellite when the astronaut grabs hold of the satellite is the relative velocity between the two objects. The relative velocity can be calculated using the principle of conservation of momentum. The principle states that the total momentum of an isolated system remains constant if no external forces act on it.

The initial momentum of the satellite is

= (600.00 kg) * (17,000.0 m/s)

= 10,200,000 kg*m/s

The initial momentum of the astronaut and the MMU is

= (400.00 kg) * (17,010.0 m/s)

= 6,804,400 kg*m/s

The final momentum of the combined system is

= (600.00 kg + 400.00 kg) * v,

where v is the final velocity of the combined system.

The conservation of momentum equation:

=> initial momentum = final momentum

= 10,200,000 kgm/s + 6,804,400 kgm/s

= (1000 kg) * v

= v

= (10,200,000 + 6,804,400) / 1000

= v

= 17,004.4 m/s

So, the combined velocity of the astronaut and the satellite when the astronaut grabs hold of the satellite is 17,004.4 m/s.

It's important to note that the relative velocity is the same in both directions, this is a vector quantity and direction is important.

To know more about velocity please refer: https://brainly.com/question/18084516

#SPJ4

The magnitude of the torque will increase as the angle between the force and the line of action of the torque approaches 90 degrees.

Torque is a measure of the rotational force acting on an object and is defined as the product of the force and the distance from the axis of rotation to the point where the force is applied. The torque is also proportional to the sine of the angle between the force and the line of action of the torque.

When the angle between the force and the line of action of the torque is 0 degrees, the torque is zero, as the force is acting in the same direction as the line of action of the torque. As the angle increases, the torque increases and reaches its maximum value when the angle is 90 degrees, at this point the sine of the angle is 1, so the torque is at its maximum value.

In practical terms, if you imagine a door knob, when you push or pull the door knob closer to 90 degree angle with the door, it will be harder to open or close the door, than when you push or pull the door knob at a small angle.

To know more about Torque click below:

brainly.com/question/6855614#

#SPJ4

Answer:

1.)Reflection is the act of light reflecting back when it hits a medium on a plane. Refraction is the process by which light shifts its path as it travels through a material, causing the light to bend. Thus, this is the key difference between reflection and refraction. This phenomenon usually occurs in mirrors.

2.)ray diagrams are a visual representation of the propagation of light. They can help us to understand and visualise multiple situations, such as light being reflected off of a mirror or changing its direction while moving through a lens.

3.)Reflection: The process of sending back the light rays which fall on polished surface is called reflection of light.

Laws of reflection:

(i) The angle of reflection is always equal to the angle of incidence.

(ii) The incident rays, reflected rays and the normal, all lie in the same plane.

4.)Snell’s law formula is expressed as: μ= sin i/sin r

, where i is the angle of refraction, r is the angle of refraction and μ is known as the refractive index of the second medium with respect to the first medium.

Answer:

15 seconds :)

Explanation:

The balloon will be drawn to the wall once it has been rubbed sufficiently to build up a sufficient negative charge. Even though the wall should generally be neutrally charged, its charges can change, causing a positively charged region to pull the negatively charged balloon toward it.

To know more about conductor here

https://brainly.com/question/24154868

#SPJ4

Answer:

it will increase the frequency of collisions between the two reactants

Explanation:

mark brainliest?

Explanation:

Let a be the sphere of mass 10 kg and b be the sphere of mass 20 kg. According to Newton's universal law of gravitation, the gravitational force of a on b is expressed as:

F

a

b

=

G

m

M

d

2

, where:

G

=

6.67

×

10

−

11

N

m

2

/

k

g

2

is the gravitational constant

m = 2 kg is the mass of a

M = 10 kg is the mass of b

d = 0.2 m is the separation between the two spheres

So:

Fab=GmMd26.67

×

10

−

11

×

2

×

10

0.2

2

Torque =   force x distance from point of rotation

Torque is a measure of the turning effect of an applied force about a specific point or axis. It is calculated by multiplying the force applied to an object by the distance from the point of rotation to the point where the force is applied. The greater the force or the longer the distance from the point of rotation, the greater the torque. The unit of torque is typically Newton-meters (N·m) in the International System of Units (SI) or pound-feet (lb·ft) in the imperial system. Torque is essential in various fields such as physics, mechanics, engineering and robotics.

To know more about Torque click below:

https://brainly.com/question/6855614#

#SPJ4

Answer: The time it took for them to fall ere the same.

Explanation:

The only difference was because of resistance, weight doesn't affect the speed of gravity, the speed of gravity stays the same (9.801 meters per second)

The work done to launch the motion of both the hammer and the bullet are 3.1×10³ Joule and 2.2×10² Joules respectively.

As we know,

Work = Kinetic Energy

         = (0.5)(mv^2)

For Work in Joules, the mass is in units of Kg, and the velocity is in units of m/s.

KE(hammer) = 1/2mv^2 = 1/2 x 7.3 x (29)^2 = 3.1 x 10^3 J

and KE(bullet) = 1/2mv^2 = 1/2 x 2.6 x 10^-3 x (410)^2 = 2.2 x 10^2 J

To solve this problem, we must assume that energy is conserved. (This isn't stated in the problem, and is not true in general in these real-world examples, however we must assume conservation of energy in order to solve the problem with the information given).

When an object moves while a force is being exerted on it, then work is being done on the object by the force. If an object moves through a displacement d while a constant force F is acting on it, the force does an amount of work equal to W = F · d = F d cos φ where φ is the angle between d and F.

To know more about work done here

https://brainly.com/question/22116319

#SPJ4

The formula that shows the relationship between the surface area (S) and volume (V) for spheres is S = 4πr² and V = (4/3)πr³ where r is the radius of the sphere.

This formula shows that the surface area of a sphere is directly proportional to the radius squared, and the volume is directly proportional to the radius cubed. This means that as the radius of a sphere increases, the surface area and volume will increase at a much faster rate. For example, a sphere with a radius of 2 will have four times the surface area and eight times the volume of a sphere with a radius of 1.

The question is incomplete, hence the answer is general.

Learn more about volume of the spheres here: brainly.com/question/22807400

#SPJ4

Torque is calculated using the moment arm is Torque =Lever Arm x Fy (or Force sin( )) Torque = Force (Fm) x Moment Arm.

Calculating Torque: The formula for torque is =|r| |F|sin = | r | | F | sin, where |r| is the size of the lever arm, |F| is the size of the force vector, and is the angle created between the two vectors.

In mechanics, they have slightly different meanings but the same meaning in physics. The moment is a static force, whereas the torque is a moving force, even though they both have the same unit, N-m. Torque is utilized when there is rotation, whereas moment is used when there isn't.

To know more about Torque visit:-

https://brainly.com/question/28220969

#SPJ4

Bill James came up with the Pythagorean Theorem of Baseball, which connects the amount of runs a club has scored and given up to its actual winning %.

The Pythagorean Theorem is the idea that a baseball team's record may be roughly estimated by taking the square of team runs scored and dividing it by the square of team runs scored plus the square of team runs allowed. Bill James, a baseball analyst, made this idea famous.

The Pythagorean Winning % approach uses the relationship between a team's victories and losses and the number of points scored and allowed to calculate the predicted winning percentage. To follow Pythagorean winning percentages for the seasons, consult the team statistics.

To learn more about Pythagoras theorem visit:

brainly.com/question/343682

#SPJ4

The margin of error is 3.96.

The value of e, or the margin of error, can be calculated using the formula:

e = z*(s/√n)

where:

z = the critical value from a standard normal distribution table (for c = 0.99, z = 2.576)

s = the sample standard deviation (in this case, s = 2.6)

n = the sample size (in this case, n = 16)

So, to find the margin of error for this scenario, we plug the given values into the formula:

e = 2.576*(2.6/√16) = 2.576*(2.6/4) = 2.576*0.65 = 3.96

Therefore, the margin of error is 3.96.

It's worth noting that this value represents the range within which we expect the true population value to fall with a certain level of confidence

Read more about Margin of Error:

https://brainly.com/question/13990500

#SPJ4

It is important to note that the dot product and cross product of any two non-zero vectors cannot both be zero therefore  A×B and A·B cannot both be zero.

In vector space, a non-zero vector. V is a vector that differs from the zero vector in V. If u is a non-zero vector in V and an is a scalar, i.e. an element of the field over which V is defined, then au=0 is only possible if a=0.

The product of any two non-zero vectors is non-zero in this vector context. It is referred to as Hamilton's Quaternions. Over the real numbers, quaternions form a four-dimensional vector space, and their multiplication is a combination of dot product and cross product.

Learn more on non-zero vectors here: https://brainly.com/question/24254277

#SPJ1

The time taken by the object to hit the ground is 1.8 seconds.

The attraction that draws two objects together is known as gravitational force, sometimes referred to as gravity. Every mass-containing object pulls on nearby things gravitationally in a sizable way.

The time it takes for an object to hit the ground after being dropped off a cliff can be calculated using the formula:

t = √(2*d/g)

where t is the time, d is the distance fallen, and g is the acceleration due to gravity.

In this case, we don't know the distance fell, but we can use the horizontal velocity and time of travel to find it:

d = v * t

where v is the velocity (6 m/s), and t is time (3 seconds)

d = 6 * 3 = 18 m

Now we can use the distance fallen to calculate the time it takes to hit the ground:

t = √(2*d/g)

g is approximately 9.8 m/s^2

t = √(2*18/9.8) = √ (3.6) = 1.8 seconds

So, it takes 1.8 seconds for the object to hit the ground after traveling horizontally off a cliff at 6 m/s for 3 seconds.

To know more about gravitational force, visit:

brainly.com/question/12528243

#SPJ1