Answer:
A. Even, smooth
Explanation:
In regular reflection, light reflected from a smooth surface in a definite direction
Differences between sublimation and condensation
The difference between sublimation and condensation is that
Sublimation is used to in a separation technique to separate sublime substance from a mixture while condensation is the
is the process where water vapor becomes liquid
What is separation technique?This technique is used in chemistry to separate two or more constituents from a mixture
In conclusion, sublimation differs from condensation because sublimation is used to in a separation technique to separate sublime substance from a mixture while condensation is the
is the process where water vapor becomes liquid
Learn more about separation technique:
https://brainly.com/question/10862519
#SPJ1
Technical skills: knowledge base of sport rearrange our coaching skills from best (at the top) to worst (at the bottom) by dragging each skill to where you think it belongs. this should help you identify your current strengths and limitations as a teacher/coach. after organizing each group of skills, describe steps you think you can take to enhance your strengths and being to address your limitations as a coach.
The steps which enhance strengths and address limitations as a coach include:
Identifying weakness.Setting goals.Consistency.Who is a Coach?This is referred to a professional who gives special training about a particular subject or topic.
It is best to identify weakness and work towards improvement through determination and consistency.
Read more about Coach here https://brainly.com/question/26164090
#SPJ1
Based on all we know about the terrestrial worlds, what single factor appears to play the most important role in a terrestrial planet's geological destiny?
Based on all we know about the terrestrial worlds, the single factor appears to play the most important role in a terrestrial planet's geological destiny is size size of terrestrial planet .
According to the question
Terrestrial Planets:
They belongs to a class of planets that are like the earth
Geological destiny :
Geology is biological destiny: Whatever minerals land or are deposited in a place determine what or who can make a living there millions of years later
Based on all we know about the terrestrial worlds, what single factor appears to play the most important role in a terrestrial planet's geological destiny
i.e
The size of terrestrial planet is one of the factors to play the most important role in a terrestrial planet's geological destiny
which determines how long the planet can retain internal heat, which drives geological activity because Smaller worlds cool off faster and harden earlier .
Hence, Based on all we know about the terrestrial worlds, the single factor appears to play the most important role in a terrestrial planet's geological destiny is size size of terrestrial planet .
To know more about terrestrial here:
https://brainly.com/question/13490379
#SPJ4
A machine has a mechanical advantage of 0.6. what force should be applied to the machine to make it apply 600 n to an object? 100 n 360 n 1000 n 3600 n
Answer:
frictional force, should be applied to the machine
Answer: C) 1000N is needed to be applied.
Explanation: Have a Good day!!
A marching band is practicing. The band director sees the drum major hit a drum. How far away is the director if he hears the drumbeat in 0.40 seconds
The director is 132 meters away from the marching band when the sound travels to him at 330 m/s.
The speed of sound is 330 m/s.
Time taken by sound to travel = 0.40 seconds
Speed = Distance/Time
The temperature of the air that the sound travels through affects the speed of the sound. Assuming an air temperature of 59 degrees Fahrenheit (15 degrees Celsius), the speed of sound at sea level on Earth is 761.2 mph (1,225 km/h).
The speed of sound is slowed down because gas molecules move more slowly at lower temperatures; sound travels more quickly through warmer air. As a result, higher in the atmosphere, where it is colder, the speed needed to break the sound barrier drops.
To learn more about the speed of sound please visit-
https://brainly.com/question/15381147
#SPJ1
A stone is thrown horizontally from the top of a tower at the same instant a ball is droppedvertically. Which object is traveling faster when it hits the level ground below?
The ball is travelling faster when the two objects hits the level ground below.
Time of motion of the objectsThe time of motion of the objects depends on height and initial velocity of projection of the objects.
The stone has no initial vertical velocity while the ball has initial vertical velocity.
Thus, the ball is travelling faster when the two objects hits the level ground below.
Learn more about time of motion here: https://brainly.com/question/2364404
#SPJ1
A 40.0 N crate is pulled up a 5.0 m inclined plane. The angle of inclination of the plane to horizontal is 37o. If there is a constant force of friction of 10.0 N between the crate and the surface, what is the net gain in potential energy by the crate? Group of answer choices 120 J -120 J 210 J -210 J
The net gain in potential energy by the crate is 120 J.
What is potential energy?Potential energy is the energy that an object has stored in it as a result of its position or condition. Potential energy exists in a stretched spring, a book held above your head, and a bicycle on top of a hill. The joule, which is represented by the letter "J," is the standard unit for calculating potential energy.
Calculation:We use the idea of potential energy, which is given by the equation,
PE = mgh
where,
m = mass of the crate
g = gravitational acceleration
h = height
Given,
mg = 40 N
L = 5 m
angle of inclination, ∅ = 37°
h = L sin∅
h = 5 (sin 37°)
h = 5 (3/5)
h = 3 m
Put the values in the above formula,
PE = mgh
PE = 40 (3)
PE = 120 J
Therefore, the net gain in potential energy by the crate is 120 J.
Learn more about the calculation of work and force here:
https://brainly.com/question/28043403
#SPJ4
A Carnot engine operates between a hot reservoir at 320 degrees Kelvin and a cold reservoir at 260 degrees Kelvin. If it absorbs 500 Joules of heat at the hot reservoir, how much work does it deliver
The work done delivered by the Carnot engine is 93.75 J.
What is Carnot Engine?Leonard Carnot proposed the Carnot engine, a hypothetical thermodynamic cycle. It calculates the highest feasible efficiency that a heat engine can have when converting heat into work and when operating between two reservoirs.Any system working between [tex]T_1[/tex] (hot reservoir) and [tex]T_2[/tex] (cold reservoir) will never have better efficiency than the Carnot engine running between the identical reservoirs.Additionally, the efficiency of this form of engine is only reliant on the temperature of the hot and cold reservoirs and is independent of the composition of the working substance.Solution:
[tex]T_c = 260 K\\ T_h = 320K\\ Q_h = 500J[/tex]
As we know that Carnot engine is ideal, the efficiency depends only on the temperature of the reservoirs(in kelvin scale):
[tex]n = 1 - \frac{T_c}{T_h} \\n = 1 - \frac{260}{320}[/tex]
[tex]n = 1- 0.8125\\n = 0.1875[/tex]
Also, we know that the work done is equal to product of efficiency and heat at hot reservoir:
[tex]W = n\times Q_h\\W = 0.1875 \times 500\\W = 93.75 J[/tex]
Know more about Carnot engine numerical
https://brainly.com/question/15859560
#SPJ4
At 30° north latitude, at the northern edge of tropical (hadley) cell convection in the northern hemisphere, ________.
a. cool
b. dry
c. air sinks
d. becoming drier as it heats up
At 30° north latitude, at the northern edge of tropical (Hadley) cell convection in the northern hemisphere d. becoming drier as it heats up
Hadley cells: A cell in the tropics is called Hadley cell. Ferrel cells: In the middle latitudes the circulation is that of sinking cold air that comes from the poles and the rising warm air that blows from the subtropical high. At the surface these winds are called westerlies and the cell is known as the Ferrel cell.
As air is warmed at the equator it becomes less dense and rises, while at the poles the cold air is denser and sinks.
Because of the rotation of the Earth and the Coriolis Effect, rather than a single atmospheric convection cell in each hemisphere, there are three major cells per hemisphere. Warm air rising at the equator cools as it moves through the upper atmosphere, and it descends at around 30° latitude.
The convection cells created by rising air at the equator and sinking air at 30° are referred to as Hadley Cells, of which there is one in each hemisphere. The cold air that descends at the poles moves over the Earth’s surface towards the equator, and by about 60° latitude it begins to rise, creating a Polar Cell between 60° and 90°.
correct option is d. becoming drier as it heats up
To learn more about Hadley cells here
https://brainly.com/question/10769956?referrer=searchResults
#SPJ4
A thin stream of water bends toward a negatively charged rod. When a positively charged rod is placed near the stream, it will bend in the same direction, not the opposite direction. Why
Water bends in the same direction irrespective of the charge of the rod placed near it is because water is dipole- that hydrogen is positively charged and oxygen is negatively charged and thus either of the particle is attracted by the charged rod.
The reason behind it:
As a neutral substance, water has an equal number of positive and negative charges. The negatively charged electrons migrate away from the negatively charged rod and the positively charged protons move toward the rod when the negatively charged rod is placed closer to the water. Water then adheres to the rod. Protons migrate away from the positively charged rod, just as they do when it is moved closer to the water, while electrons flow in its direction. As a result, the water and rod form a relationship.
The partial +ve charge on H is drawn to the -ve charged rod when it is installed, which causes the water stream to bend in the direction of the charged rod.
The partial -ve charge on O is drawn to the +ve rod when it is installed, causing the water stream to bend in the direction of the rod.
Learn more about positive and negative charges here:
https://brainly.com/question/2292900
#SPJ4
Place the charge q= 2.10-5c at the origin o of the oxy-axis system. consider two points a(6;0) and b(3;4) on the axes with unit of measurement in cm. choose the potential origin at infinity. calculate the work done by the electric field when moving the charge q=-1uc from a to b
The work done by the electric field when moving the charge from a to b is 0.0378 J.
Distance between a and b
r = √[(a₂ - a₁)² + (b₂ - b₁)²]
r = √[(3 - 6)² + (4 - 0)²]
r = 5 m
Work done in moving the chargeW = Fr
W = kq₁q₂/r
W = (9 x 10⁹ x 2.1 x 10⁻⁵ x 1 x 10⁻⁶)/(5)
W = 0.0378 J
Thus, the work done by the electric field when moving the charge from a to b is 0.0378 J.
Learn more about work done here: https://brainly.com/question/8119756
#SPJ1
Air that is not saturated will cool or heat at a rate of __________________ as it rises or descends, respectively
Air that is not saturated will cool or heat at a rate of 10 degrees C/1000 meters as it rises or descends, respectively
The rate of the change in temperature which is observed while moving upward in the earth's atmosphere with elevation. It can be positive, negative and zero when the temperature decreases, increases or is constant with the elevation respectively.
For the atmosphere, the drop in temperature of rising air that is unsaturated air is about 10 degrees C/1000 meters (5.5 °F per 1000 feet) altitude.
That means if a there occur a rise of 1000 m , then the temperature of that thing will decrease to 10 degrees. Every 10°C of temperature from the given temperature will decrease at every rise of 1000 m .Air that is not saturated will cool or heat at a rate of 10 degrees C/1000 meters as it rises or descends, respectively
To learn more about unsaturated air here
https://brainly.com/question/13434971?referrer=searchResults
#SPJ4
As the volume of a chamber decreases, the pressure inside the chamber ____________ . as the volume increases, the pressure ____________ .
Answer: Increases, decreases
Explanation:
As the volume of a chamber decreases the pressure inside the chamber increases. As the volume increases the pressure decreases
A block with a mass of 2kg is pushed 20cm and a constant speed up an incline that makes a 40 degree angle with the floor. how much work is done by gravity on the block ? let d be the displacement of the block.
work done will be 2.5872 J
Given :
mass of block = 2kg
distance travelled by block = 20cm
angle of inclination = 40°
To Find :
Work done by gravity
Solution :
Gravity is defined as the force that attracts a body towards the earth or towards any other physical body having mass.
work done by gravity is mgh
If θ is the angle made when the body falls, the work done by gravity is given by,
W = m g h cosθ
W = 2 x 9.8 x 0.2 x cos40°
= 2.5872 J
So work done will be 2.5872 J
Learn more about Work done here:
https://brainly.com/question/25923373
#SPJ4
g Suppose the intensity of some electromagnetic wave doubles. What happens to the amplitude of the wave's electric field?
The amplitude of the wave's electric field is [tex]\sqrt{2}[/tex] times if the intensity of some electromagnetic wave doubles.
What is electromagnetic wave:
Electromagnetic waves also called EM waves, are waves that are created as a result of vibrations between an electric field and magnetic field.
The formula of Intensity of electromagnetic wave:
I = 1/2 ( c* ε(0)* E(0)^2 )where c is speed of light
E is amplitude of electric field
here Intensity of EM waves doubles so,
I' = 2*I
we can say that,
I ∝ E^2
E = sqrt ( I )
E' = sqrt ( 2*I )
hence
E' = [tex]\sqrt{2}[/tex] * E
so, the amplitude of the wave's electric field is [tex]\sqrt{2}[/tex] times if the intensity of some electromagnetic wave doubles
learn more about electromagnetic wave here:
https://brainly.com/question/17057080
#SPJ4
Answer the following regarding Momentum Change and Force:
A) A top-class tennis player can serve the ball, of mass 57 g, at an initial horizontal speed of 50 m/s. The ball remains in contact with the racket for 0.05 s. Calculate the average force exerted on the ball during the serve.
B) A motor car of mass 3000 kg moving with 72 km h-1 made to reduce its speed to 18 km h^-1, in 40 s, by applying brakes. Find the resistive force.
A. The average force exerted on the ball during the serve is 57 N
B. The resistive force, given the data is -1125 N
A. How to determine the average forceMass (m) = 57 g = 57 / 1000 = 0.057 KgInitial velocity (u) = 50 m/sTime (t) = 0.05 sAcceleration (a) = u / t = 50 / 0.05 = 1000 m/s²Force (F) = ?F = ma
F = 0.057 × 1000
F = 57 N
B. How to determine the resistive forceMass (m) = 3000 KgInitial velocity (u) = 72 Km/h = 72 / 3.6 = 20 m/sFinal velocity (v) = 18 Km/h = 18 / 3.6 = 5 m/sTime (t) = 40 sForce (F) = ?F = m(v – u) / t
F = 3000(5 – 20) / 40
F = -1125 N
Learn more about momentum:
https://brainly.com/question/250648
#SPJ1
The amount of straight pipe needed to bend a given radius. Also, the actual length of the conduit that will be bent.
Development length: The actual length of the bent conduit. Gain: Since a conduit bends radially rather than at an angle, the total length will not match the length required for all bends. Gain is the amount of space that is saved by a [tex]90^{0}[/tex] curve.
Bent ConduitConduit benders from Klein Tools are built to function and last longer than even the highest professional standards. To ensure a favourable experience and significantly enhance the final result of your project, it is advised that you become familiar with bending concepts, procedures, and the bender's capabilities. The benders are labelled with various alignment symbols to enable the operator make the bends required to complete any job. This aids bending while executing a ground or air bend. Arrow, teardrop, star point, and angle markings are the symbols on the Klein Tools benders. On certain bender head sides, you can see these markings.
Learn more about bent conduit here:
https://brainly.com/question/5023977
#SPJ4
Your older brother approaches a stop sign at a velocity of 14 m/s [E] as the light turns amber, He applies the brakes to get the maximum stopping force while avoiding skidding. The car has a mass of 1500 kg, and the coefficient of friction between the tires and the road is 1.07. Ignoring your brother's reaction time, calculate:
a) The maximum deceleration of the car
b) The stopping distance
The maximum deceleration of the car is 10.5 m/[tex]s^{2}[/tex] approximately. While the stopping distance is 9.3 m
What is Stopping Force ?
Stopping force is the force required to stop the object in motion. Stopping force is tantamount to frictional force.
Given that a brother approaches a stop sign at a velocity of 14 m/s [E] as the light turns amber, He applies the brakes to get the maximum stopping force while avoiding skidding. The car has a mass of 1500 kg, and the coefficient of friction between the tires and the road is 1.07. Ignoring your brother's reaction time.
The given parameters are;
Velocity V = 14 m/sMass m = 1500 kgCoefficient of friction μ = 1.07Deceleration a = ?Stopping distance S = ?The normal reaction N = mg
N = 1500 x 9.8
N = 14700 N
The stopping force = μN = ma
1.07 x 14700 = 1500a
15729 = 1500a
a = 15729/1500
a = 10.486 m/[tex]s^{2}[/tex]
From 3rd equation of motion
[tex]V^{2}[/tex] = [tex]U^{2}[/tex] + 2aS
where U = 0
[tex]14^{2}[/tex] = 2 x 10.486 x S
196 = 20.972S
S = 196/20.972
S = 9.3 m
Therefore, the maximum deceleration of the car is 10.5 m/[tex]s^{2}[/tex] approximately. While the stopping distance is 9.3 m
Learn more about Force here: https://brainly.com/question/8119756
#SPJ1
The technique called adaptive optics uses dynamic mirror motion to enhance the performance of the new generation of spaced-based telescopes. True False
The mentioned statement is true.
What is adaptive optics(AO)?
Adaptive optics (AO) is a technique that enhances optical systems' performance by minimizing the impact of incoming wavefront aberrations and deforming a mirror to account for the distortion. It is employed in microscopy, optical manufacturing, and retinal imaging systems to lessen optical aberrations and in astronomical telescopes and infrared communication devices to eliminate the impacts of environmental turbulence. Using a technology that adjusts flaws, including a flexible reflector or a liquid crystal array, adaptive optics(AO) measures the abnormalities in a wavefront and adjusts them.How can adaptive optics(AO) enhance a telescope's capabilities?
To counteract the impacts of disturbance, it quickly modifies the telescope mirror's shape.A moderately luminous target star that is adjacent to the target being studied is necessary for adaptive optics. With the use of the deformable mirror, the blurring brought on by the nearby atmosphere is measured using this reference star.Therefore, it is concluded that the mentioned statement is true.
Learn more about adaptive optics here:
https://brainly.com/question/13068424
#SPJ4
If we have a sample of silicon (si) atoms that has 14 protons, 14 electrons, and 18 neutrons
Its silicon-32 because if you want to find an isotope, you have to add the number of protons (14) and number of neutrons (18) to get 32 as your total.
There are 23 known isotopes of silicon (14Si), with mass numbers ranging from 22 to 44. Stable isotopes include 28Si (92.23 percent), 29Si (4.67 percent), and 30Si (3.1 percent). The longest-lived radioisotope is Si-32, which is created by argon cosmic ray spallation.
What is the half-life of an ionic compound with a mass of 32?silicon-32 has a half-life of about 150 years (with a decay energy of 0.21 MeV) and decays by beta emission to 32P (which has a half-life of 14.28 days) and then to 32S. Si-32 has the second longest half-life after Si-32, at 157.3 minutes. All others have half-lives of less than 7 seconds.
Which element has the heaviest stable isotope?Bismuth, the 83rd element, was previously thought to have the heaviest stable isotope, bismuth-209, but in 2003, researchers in Orsay, France, measured the half-life of 209 Bismuth to be 1.91019 years. Only isotopes of technetium and promethium, as well as all elements with an atomic number greater than 82, are known to decompose via radioactive decay. Because no undiscovered elements are expected to be stable, lead is regarded as the heaviest stable element.
Learn more about Isotopes of Silicon:
https://brainly.com/question/14505564
#SPJ4
Energy in should always be equal to energy out. select an answer and submit. for keyboard navigation, use the up/down arrow keys to select an answer.
a. true
b. false
Energy in should always be equal to energy out. This is a False statement.
- Energy In: Energy put into the body in form of calories from food like fats, carbohydrates and proteins.
- Energy Out: Energy burn for basic functions of the body like beating of the heart during physical movements.
When we consume more energy but does not consume it upto its potential, the body keeps storing the excess amount of energy as body fat. Maintaining a balance between Energy In and Energy Out is important to live a healthy lifestyle since the disbalance creates problems to the body.
It is easier to accurately measure change in energy than to measure the amount of energy present.
Learn more about Calories here, https://brainly.com/question/22374134
#SPJ1
Several short trips taken from a cold start can use ....... as much fuel as a longer multi-purpose trip covering the same distance when the engine is warm.
Several short trips taken from a cold start can use ...twice... as much fuel as a longer multi-purpose trip covering the same distance when the engine is warm.
In cold weather, properly designed gasoline aids in engine starting, while in hot weather, it helps prevent vapor lock. In order to meet the requirements of a modern engine, the fuel must have the volatility for which the engine's fuel system was built and an antiknock quality strong enough to prevent knock during routine operation.
During the intake phase, the air and fuel are combined before being introduced into the cylinder. The spark ignites the fuel-air mixture after the piston compresses it, resulting in combustion. During the power stroke, the piston is propelled by the expansion of the combustion gases.
To learn more about engine and fuel please visit -
https://brainly.com/question/5181209
#SPJ4
A 5.0-kg object is suspended by a string from the ceiling of an elevator that is accelerating downward at a rate of 2.6 m/s 2. What is the tension in the string
The tension in the string is 36 N.
To find the answer, we need to know about pseudo acceleration.
What's pseudo acceleration?When an object is placed on a vehicle, it experiences a pseudo acceleration in the opposite direction of the motion of the vehicle. Magnitude of the pseudo acceleration is same as that of the acceleration of vehicle.What's the pseudo acceleration of a mass suspended in a lift that's moving downward with an acceleration of 2.6 m/s²?Here, the acceleration of the lift is 2.6m/s², so the mass suspended by a string inside it will feel a pseudo acceleration of 2.6m/s² upward.So the effective acceleration of the mass = acceleration due to gravity - pseudo acceleration = 9.8 - 2.6 = 7.2 m/s²What's the tension of the string suspending the mass?Tension of the string= mass × effective acceleration
= 5 × 7.2 = 36 N
Thus, we can conclude that the tension in the string is 36 N.
Learn more about the pseudo acceleration here:
brainly.com/question/26644944
#SPJ4
Location C is 0.02 m from a small sphere which has a charge of 3 nanocoulombs uniformly distributed on its surface. Location D is 0.06 m from the sphere. What is the change in potential along a path from C to D?
sorry for the late reply back I have been working on this project for a year now so it will not care if we can get the best of him and also has a full one of the most common misconceptions is that Africa is one large country and its followers are known as Sikhs and is the last survivor from the whole family and the fearful of all that is a metaphor of joy organised by the way I have
The change in potential along a path from C to D due to a small charged sphere is 900 V.
Given:
Charge, Q = 3 nC = 3 × 10⁻⁹ C
Distance between the sphere and point C, r₁ = 0.02 m
Distance between the sphere and point D, r₂ = 0.06 m
Calculation:
We know that the electric potential is given as:
V = k Q/r - (1)
where, V is the electric potential
k is Coulomb's force constant
Qis the charge on the sphere
r is the separation distance
The electric potential at point C due to charged sphere can be given as:
V₁ = k Q/r₁
= (9×10⁹ Nm²/C²) [(3 × 10⁻⁹ C)/(0.02 m)]
= 1350 V
The electric potential at point D due to charged sphere can be given as:
V₂ = k Q/r₂
= (9×10⁹ Nm²/C²) [(3 × 10⁻⁹ C)/(0.06 m)]
= 450 V
Now, the change in potential along the path from C to D can be calculated as:
ΔV = V₂ - V₁
= 450 V - 1350 V
= -900 V
The negative sign indicates that the work is done against the electric field in moving the charge from C to D.
Therefore, the change in potential along a path from C to D is 900 V against the direction of the electric field.
Learn more about the electric potential here:
https://brainly.com/question/12645463
#SPJ4
7. A battery is used to light a 24 W electric lamp. The battery provides a charge of 120 C in
60 s.
TH
24W
What is the potential difference across the lamp?
Answer:
power p =24 watt
charge q=120 C
time t = 60s
let V be the potential difference
we know that
work done =qV = pt
qV = Pxt
120V = 24 * 60
V = (24 * 60) / 120
V = 12 volts
A thin copper rod that is 1.0 m long and has a mass of 0.050 kg is in a magnetic field of 0.10 T. What minimum current in the rod is needed in order for the magnetic force to cancel the weight of the rod? A thin copper rod that is 1.0 m long and has a mass of 0.050 kg is in a magnetic field of 0.10 T. What minimum current in the rod is needed in order for the magnetic force to cancel the weight of the rod? 7.6 A 2.5 A 9.8 A 4.9 A 1.2 A
The minimum current in the rod needed is 4.9 A for the magnetic force to cancel the weight of the rod.
What is a magnetic field?
A magnetic field is a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials.
A moving charge in a magnetic field experiences a force perpendicular to its velocity and the magnetic field.
Force on a current carrying rod due to the magnetic field is given as:
F = i*L*B
Where,
i is current in the rod.
L is the length of rod = 1 m
B is magnetic field = 0.10 T
Here,
The Magnetic force is balanced by the weight of the rod
i*L*B = m*g
i* ( 1 )* ( 0.10 ) = 0.05 * 9.8
i = 4.9 A
Hence, option d is correct.
The minimum current in the rod needed is 4.9 A for the magnetic force to cancel the weight of the rod.
Learn more about the magnetic field here:
https://brainly.com/question/13962582
#SPJ4
What tidal volume typically maintains normal oxygenation and elimination of carbon dioxide acls?
The tidal volume which typically maintains normal oxygenation and elimination of carbon dioxide is 8 to 10 ml/kg of body mass.
What is tidal volume?Tidal volume refers the amount of air that moves in and out of the lungs in one respiratory cycle.
During a respiratory cycle, oxygen moves into the lungs and the tissues during inhalation, while carbon dioxide moves out of the lungs during exhalation.
The continuous outward movement of carbon dioxide and inward movement of oxygen ensures that the body maintains homeostasis and internal or tissue respiration continues.
The normal tidal volume is about 500 ml per inspiration or 7 ml/kg of body mass.
However, for normal oxygenation and elimination of carbon dioxide, a tidal volume of about 8 to 10 ml/kg of body mass is required.
In conclusion, the tidal volume is a measure of the amount of air flow in the lungs for each respiratory cycle.
Learn more about tidal volume at: https://brainly.com/question/11504397
#SPJ1
What is the voltage drop across the 10.0 ohm resistor?
The voltage across all the resistors is the same i.e 120V
Each element of the parallel circuit has the same voltage applied to it. The total current flowing from the source is equal to the sum of the currents across each path. The electric potential difference (V) across each resistor in a parallel circuit is the same. Ohm's law states that I = V / R applies to the current in a resistor. The current will be lowest where the resistance is highest since the V is the same for each resistor. The currents passing through each resistor in a parallel combination have the same voltage across them because of their different resistance values and the laws of Ohms i., If two or more components are connected in parallel, they will be having same difference of potential (voltage) across their ends Parallel circuits are then used as current dividers.
To learn more about Parallel circuits please visit -
https://brainly.com/question/14997346
#SPJ1
Why is the molten metallic outer core and the magnetic field important to life on earth?.
Earth's magnetic field and molten metallic outer core creates barrier to stop Sun's radiation to strip away our atmosphere.
As we know that inside the earth there are several layers of the earth. The outer one is the Earth's crust which is all the ground we have , then we have the mantle that consist upper and lower crust. And then after we have outer and inner crust.
The outer core is made of molten material that consist of mainly iron and other ferrous metals. The core is important for many reasons-
The inner core rotates counter to the outer core which in return creates powerful magnetic field. And this magnetic field creates barrier to stop Sun's radiation to strip away our atmosphere.The outer core is conveniently under the crust which is fragmented into tectonic plates. Because of this, the terrain changes and sometimes holes are formed in the crust allowing volcanoes to form. The volcanoes provide all sorts of natural gases which is essentials to life and also help in creating very fertile land in which animals can thrive.Learn more about earth's magnetic field here:
https://brainly.com/question/19764705
#SPJ4
The figure in Figure 1 shows two single-slit diffraction patterns. The distance between the slit and the viewing screen is the same in both cases. Which of the following could be true
Answer:
"The wavelengths are the same for both. The width of slit 1 is larger than the width of slit 2."
Explanation:
The full question has not been provided, so I just copied this into the web and found this answer and explanation on quizlet:
"The wavelengths are the same for both. The width of slit 1 is larger than the width of slit 2.
D sin θ = m λ
if the wavelengths are the same, then if the angle is smaller, the slit width must be larger. The top photo shows a pattern that is more closely spaced. That means the angle is smaller. The slit width must be larger."
This answer/explanation should be correct, as we are looking at bright fringes and the formula being used corresponds to the parameters of the question.
Hope this helps!