Answer:
option D is correct answer of this question
Write the name of CO
Answer:
cobalt
Explanation:
Could someone please help me? You can ignore number 3:)
Answer:
Question 2: Because the elements could be unstable, forming elemental compounds.
Question 1: Water is made up of Hydrogen and oxygen, which is namely called H2^o What makes it a pure substance is the little mass and molecules it's made up of.
When making a cup of ramen with boiled water, which of the
following example is conduction?
a Stirring the soup to make it cooler
b Smelling the soup outside the kitchen
C Feeling heat from holding the cup
d The powdery soup dissolving in water
e The soup releasing hot steam
Answer:
C. Feeling the heat from holding the cup
Explanation:
Conduction is the process by which heat or electricity is directly transmitted through a substance to another substance that has different levels of heat or electricity.
Therefore, the only logical answer is C. Feeling heat from holding the cup.
This is because the heat from the cup is being directly transmitted to the hand of the person.
Hope this helps!!
- Kay :)
I gave brainlest:: answer this .....
Growing salt crystals from evaporated sea water is an example of a chemical reaction.
True
False
Answer:
false
Explanation:
This is not a chemical reaction.
why ammonia is a identified as a weak base?
can you explain what it is meant by it only ionise partially?
Answer:
Ammonia doesn't contain any hydroxide ions to begin, but it's dissolved in water acquires hydrogen ion from the water to produce hydroxide as well as ammonium ions. However ammonia doesn't fully convert into hydroxide and ammonium ions in solution that's why ammonia is a weak base.
___MgCl2(s) +___ MiCO3(s)
Answer:
MgCl2 (s) + Li2CO3 (s) ==> MgCO3 (s) + 2LiCl (aq)
Double Replacement
Explanation:
MgCl2 (s) + Li2CO3 (s) ==> MgCO3 (s) + 2LiCl (aq)
Double Replacement
Halogens are Soluble
Carbonates are Insoluble
This reaction DOES take place.
How many moles of S would I have if I had 11 grams? (Stoichiometry) HELP
0.34 mol S
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableStoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
11 g S
Step 2: Identify Conversions
[PT] Molar Mass of S - 32.07 g/mol
Step 3: Convert
Set up: [tex]\displaystyle 11 \ g \ S(\frac{1 \ mol \ S}{32.07 \ g \ S})[/tex]Multiply/Divide: [tex]\displaystyle 0.343 \ mol \ S[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
0.343 mol S ≈ 0.34 mol S
When 5.0g of NH4CLO4 is added to 100mL of water in a calorimeter, the temperature of the solution formed decreases by 3.0C?
Answer:
24.7 C
Explanation:
I don't know how
The final temperature of 1000 ml water by the addition of 5 g ammonium perchlorate has been 24.7 degree Celsius.
With the addition of 5 g of ammonium perchlorate, the drop in temperature has been:
The addition of 5 g sample to 100 ml water has absorption of energy, that results in change in temperature of 3 degree Celsius.
The heat absorbed by sample has been given as:
Heat = mass × specific heat × change in temperature
Since, the same mass of sample has been added to 25 degree Celsius water, according to law of conservation, the change in density for both the changes has been equivalent.
The ratio of masses has been equivalent to the ratio of volume.
[tex]\rm \dfrac{Mass\;at\;1000\;ml}{Mass\;at\;100\;ml}\;=\;\dfrac{Volume\;at\;1000\;ml}{Volume\;at\;100\;ml}\\\\\\\dfrac{Mass\;at\;1000\;ml}{Mass\;at\;100\;ml}\;=\;\dfrac{1000\,ml}{100\;ml}\\\\\\\dfrac{Mass\;at\;1000\;ml}{Mass\;at\;100\;ml}\;=\;10[/tex]
Since, the mass at 100 ml and mass at 1000 ml has been equal, the heat absorbed by the sample has also been equal. Equating the values:
Mass at 100 ml × Specific heat × Change in temperature = Mass at 1000 ml × Specific heat × Change in temperature
[tex]\rm 3\;degree\;Celsius\;= \;\dfrac{Mass\;at\;1000\;ml}{Mass\;at\;100\;ml}\;\times\;Change\;in\;temperature\\\\3\;degree\;Celsius\;= \;10\;\times\;Change\;in\;temperature\\\\Change\;in\;temperature\;=\;\dfrac{3}{10}[/tex]
Change in temperature = 0.3 degree Celsius.
The initial temperature of water has been 25 degree Celsius. The change in temperature has been given by:
Change in temperature = Initial temperature - Final temperature
0.3 degree Celsius = 25 degree Celsius - Final temperature
Final temperature = 25 - 03 degree Celsius
Final temperature = 24.7 degree Celsius.
The final temperature of 1000 ml water by the addition of 5 g ammonium perchlorate has been 24.7 degree Celsius.
For more information about the final temperature, refer to the link:
https://brainly.com/question/18875024
A 100.-gram sample of H2O(l) at 22.0°C absorbs 830. joules of heat. What will be the final temperature of the water?
Answer:23.976
Explanation:830j = 197.6 cal. 197.6/100g=1.976 degrees. plus 22 degrees =23.976
how do isotopes of an atom differ? how are they the same?
Answer: Isotopes of an atom are different because they have different atomic masses and different number of neutrons within their nucleus. They are the same since they will always have the same atomic number/number of protons in their nucleus.
Explanation:
what number repersents the subscript 5H2
How many liters of solution would it take to make a 0.250 M solution when you have 3.52 moles of solute?
Answer:
The volume of solution in liters required to make a 0.250 M solution from 3.52 moles of solute is 14.08 liters of solution
Explanation:
The question relates to the definition of the concentration of a solution which is the number of moles per liter (1 liter = 1 dm³) of solution
Therefore we have;
The concentration of the intended solution = 0.250 M
Therefore, the number of moles per liter of the required resolution = 0.250 moles
Therefore, the concentration of the required solution = 0.250 moles/liter
The volume in liters of the required solution that will have 3.52 moles of the solute is given as follows;
The required volume of solution = The number of moles of the solute/(The concentration of the solution)
∴ The required volume of solution = 3.52 moles/(0.250 moles/liter) = 14.08 liters
The required volume of solution to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.
Therefore the number of liters required to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.
If both parents have on dominant gene and one recessive gene, what is the ratio of children
that will exhibit the dominant gene?
Answer:
the child would have a 1 in 2 chances of having a dominant gene
Explanation:
Parent 1 Parent 2
d d
r r
child
d
d= dominant
r= recessive
Ba(CN)2
What is the name of the compound?
Answer:
Barium cyanide
Explanation:
I don't no
The name of the compound Ba(CN)₂ is called barium cyanide.
The compound Ba(CN)₂ is called barium cyanide. It is a white crystalline solid that is soluble in water. Barium cyanide is a toxic compound and can be fatal if ingested. It is used in electroplating and other metallurgical processes.
The name of the compound is derived from the names of the elements that make up the compound. Barium is named after the Latin word for "heavy", and cyanide is named after the Greek word for "blue". The -ide suffix indicates that the compound is an ionic compound, with barium as the cation and cyanide as the anion.
The chemical formula for barium cyanide can be written in a few different ways. The most common way is to write it as Ba(CN)₂. This formula shows that there is one barium atom for every two cyanide atoms. The formula can also be written as BaCN₂, but this is less common.
To know more about compound here
https://brainly.com/question/34151797
#SPJ6
These are incorrect please put the right answer on the blanks\
for brainiest:)
Answer:
1. condensation
2. Temperature
3. evaporization
4. kinetic energy
5. sub limation
6. thermal energy
7. deposition
8. vaporization
Explain how steam causes burns by describing the transfer of heat.
Answer:
It will be : (in simple terms)
Condensation of hot steam or hot vapor on the cooler skin releases the water's latent heat of vaporization, rapidly raising the temperature of the skin which will result in steam burns.
Hope it helped
All the best!!
what are oil and waters properties of matter?
Answer:
Two other beneficial properties of the oil include the inhibition of corrosion of metal surfaces, such as steel, and the removal of dirt and detritus via detergency.
Properties of water include its chemical formula H2O, density, melting, boiling point & how one molecule of water has two hydrogen atoms covalently bonded to one oxygen atom.
In the following compound (HCl) How many electrons are gained and lost by each atom?
In the following compound (NaCl) How many electrons are gained and lost by each atom
Explanation:
In HCL, one positive atom is given to chlorine from hydrogen so that it can complete it's octate. chlorine take one electron from hydrogen.
In NaCl, Sodium takes one electron from chlorine to complete its orbit with eight electrons. Chlorine gives one electron to sodium.
Classify each chemical compound listed in the table below.
type of compound (check all that apply)
compound
ionic
molecular
acid
base
H, SO:
HI
KI
Nacioz
Help me plz!
Answer:
Please find attached the table of classification of the chemical compounds, created with Microsoft Word
Explanation:
The given compounds are;
H₂SO₃ is an acid which is known as sulfurous acid
When SO₂ is added to water, we have;
SO₂ + H₂O ⇄ HSO₃ + H⁺
Therefore, H₂SO₃ is ionic
2) HI which is known as hydrogen iodide, dissolves in water as follows
HI (g) + H₂O (l) ⇄ H₃O⁺(aq) + I⁻(aq)
Therefore, HI is able to donate hydrogen ions therefore, it is both acidic and ionic
3) KI is a salt of the alkali metal, potassium, and iodine which is a group 7 element such that it formed by the transfer of electrons from potassium to iodine making it an ionic compound
KI forms a slightly alkaline solution
4) NaClO₃ comprises of the ionic combination of sodium and chlorate ions which dissolves in water as follows;
NaClO₃ → Na⁺(aq) + ClO₃⁻(aq)
Therefore, NaClO₃ is ionic
NaClO₃ is also a strong oxidizing agent, making a Br∅nsted acid
we have;
Sulfurous acid (also Sulfuric(IV) acid, Sulphuric acid (UK), Sulphuric(IV) acid (UK)) is the chemical compound with the formula H2SO3. There is no evidence that sulfurous acid exists in solution, but the molecule has been detected in the gas phase.[1] The conjugate bases of this elusive acid are, however, common anions, bisulfite (or hydrogen sulfite) and sulfite.
A teacher demonstrates a chemical reaction. A student
observes that the test tube in which the reaction occurs
becomes warm. What is the source of the thermal
energy generated by the reaction?
Select one:
A. potential energy absorbed by the reaction
B. breaking bonds of the reactants
C. kinetic energy absorbed by the reaction
D. energy stored in the reactants
Answer: B, breaking bonds of the reactant.
Explanation:
This reaction is taking in energy and we know this because it says it 'becomes warm'.
Endothermic reactions take in heat/energy from the surroundings and bond breaking occurs during an endothermic reaction.
B. breaking bonds of the reactants which emits heat energy.
The test tube in which the reaction occur is warm because the heat energy is released due to the making of new bonds. When the new bonds are formed, energy is released in the form of heat.
Energy is needed to break bonds so it absorbed the bonds so we can say that bond-breaking is an endothermic process while on the other hand, energy is released when new bonds form so we can say that bond-making is an exothermic process.
Learn more: https://brainly.com/question/21673928
Why does the periodic table have the shape it has
Answer: The arrangement of electrons in atoms is responsible for the shape of the periodic table.
Explanation: Electron configurations can be predicted by the position of an atom on the periodic table.
O_O O_O O_O
Add me as a freind!!! <3
The periodic table has the shape it has because the elements are arranged according to their atomic number, which is the number of protons in the nucleus of an atom.
The chemical elements are arranged in a periodic table in ascending order of atomic number, allowing one to observe trends in the elements' properties.
Here are some of the reasons why the periodic table has the shape it has:
The number of protons in the nucleus of an atom determines its chemical properties. Elements with similar numbers of protons have similar chemical properties, so they are grouped together in the periodic table.The number of electron shells in an atom determines its size and its reactivity. Elements with the same number of electron shells have similar sizes and reactivities, so they are grouped together in the periodic table.The number of valence electrons in an atom determines its chemical bonding. Elements with the same number of valence electrons have similar chemical bonding properties, so they are grouped together in the periodic table.The periodic table is a valuable tool for understanding the chemical properties of the elements.
Therefore, above mentioned are some of the reasons why periodic table has the shape it has.
Learn more about atom here;
https://brainly.com/question/13654549
#SPJ6
What is the answer??
Answer:
3 you use elements instead of numbers and arrows instead of equal signs
actually it would be more like word problems you have 4 apples plus 3 oranges yields 7 apple orange things but it doesn't yield 7 of them it would be an equal ratio of moles of the fruits
4 the arrow is an equal sign
Explanation:
what are the elements of the liquids in the periodic table?
Answer:
bromine,mercury ,caesium,gallium,rubidium and francium
Explanation:
Answer:
Mercury
Bromine
Caesium
Rubidium
Francium
Gallium
These all are liquid elements
The melting point of a 100g piece of zinc metal is 419ºC. If the sample is cut in half, the melting point of each half would be 419ºC. True or False
Answer: true
Explanation: same as the melting point of a gram or a tonne
4. Which of the following statements
about homeostasis is NOT true?
A Maintaining homeostasis requires that all
of the body systems work together.
B Long periods of stress can disrupt
homeostasis.
C Body temperature is a factor of
homeostasis.
D Only the nervous and endocrine systems
are involved in maintaining homeostasis.
Answer: Only the nervous and endocrine systems are involved in maintaining homeostasis.
Explanation: Hope this helped you
D. Only the nervous and endocrine systems are involved in maintaining homeostasis.
Living systems maintain homeostasis, which is defined as a state of constant internal, physical, and chemical conditions. This is a state of optimal functioning for the organism in which several variables, such as body temperature and fluid balance, are maintained within pre-determined boundaries.All of the body's systems must operate together to maintain homeostasis.Long periods of stress can cause homeostasis to be disrupted.Homeostasis is influenced by body temperature.Statement that is incorrect about homeostasis is "D. Only the nervous and endocrine systems are involved in maintaining homeostasis."For more information:
https://brainly.com/question/3888340?referrer=searchResults
State the numbers of protons, neutrons & electrons in an atom of Carbon-14
Answer:
Neutral carbon-14 contains six protons, eight neutrons, and six electrons; its mass number is 14 (six protons plus eight neutrons). These two alternate forms of carbon are isotopes.
I hope it's helpful!
What percent of FeSO4 is Fe
Answer:
About 36%
Explanation:
if 3 mol of fe2o3 reacts with 5 mol al what is the maximum amount of fe that was produced. Explanation please!
Answer:
Queso es yummy. If you give me below 5 stars u like sucking on rocks.
Explanation:
Lunar phases include the waxing and waning phases. The waxing phases have light on the _______ side of the moon as we look at it from Earth *
A. Top
B. Left
C. Right
D. Bottom
Answer:
Explanation:
The light is on the right side of the moon from Earth's perspective. The light will never be on the bottom or top. Its either waxing or waning; left or right