Answer:
Explanation:
The triboelectric effect (also known as triboelectric charging) is a type of contact electrification on which certain materials become electrically charged after they are separated from a different material with which they were in contact.
What is the speed of the elevator after it has moved downward 1.00 from the point where it first contacts a spring?
When the elevator is 1.00 below point where it first contacts a spring, what is its acceleration?
The speed of the elevator after it has moved downward 1.00 from the point where it first contacts a spring is 2.23 m/s.
The acceleration of the elevator when it is 1.00 below the point where it first contacts a spring is -9.8 m/s².
The speed of the elevator after it has moved downward 1.00 from the point where it first contacts a spring is 2.23 m/s. When the elevator is 1.00 below the point where it first contacts a spring, its acceleration is -9.8 m/s². This is because the elevator is moving downwards and accelerating due to gravity.
To solve for the speed of the elevator after it has moved downward 1.00 from the point where it first contacts a spring, we need to use the formula for potential energy and kinetic energy:
Potential Energy (PE) = Kinetic Energy (KE)
mgh = 1/2 mv²
where m is the mass of the elevator, g is the acceleration due to gravity, h is the height, and v is the velocity.
Rearranging the formula, we get:
v = √(2gh)
Substituting the given values, we get:
v = √(2 × 9.8 × 1) = 2.23 m/s
To solve for the acceleration of the elevator when it is 1.00 below the point where it first contacts a spring, we simply use the acceleration due to gravity which is -9.8 m/s². The negative sign indicates that the acceleration is directed downwards.
for such more question on acceleration
https://brainly.com/question/460763
#SPJ11
Given the definition of EER, find the EER of an 8000 Btu/hour air conditioner that requires a power input of 1500 W. Express your answer numerically in British thermal units per hour per watt. EER = __________(Btu/hour)/W
EER is defined as the Energy Efficiency Ratio which is the ratio of cooling capacity in BTU/hr to the power input in watts.
The EER of the given 8000 Btu/h air conditioner is 5.33 Btu/hour per watt.
In the case of the given 8000 Btu/h air conditioner that requires a power input of 1500 W, the EER can be calculated as follows:
EER = (cooling capacity in Btu/hr) / (power input in watts)
EER = 8000 Btu/hour / 1500 W = 5.33 Btu/hour per wat.
Energy efficiency ratio (EER) is used in the USA and is defined as the system output in Btu/h per watt of electrical energy.
Coefficient of performance (COP) is the equivalent measure using SI units, which is widely used in the UK. A COP of 1.0 equates to an EER of 3.4.
To know more about power:https://brainly.com/question/11569624
#SPJ11
You are the process engineer at Corvallis Automobiles Inc., and you have received an order to turn a cylindrical bar on an engine lathe to the dimensions specified in Fig. 1. For this order you will use cylindrical bar stock that is 48-inches long and 4-inches in diameter. The 48-inch length bar will be chucked in the lathe and supported at the opposite end using a live center. You are planning to complete the operation in one pass using a cutting speed of 400 ft./min. and a feed of 0.010 in./rev. Determine the following: a) The required depth of cut (in inches) b) The material removal rate (in cubic inches per minute)
c) The time required to complete the cutting pass (in minutes)
a. the depth of cut is 0.625 inches.
b. the material removal rate is 0.003125 cubic inches per minute.
c. the time required to complete the cutting pass is 20 minutes.
How do we calculate?a) The required depth of cut can be determined by :
DOC = (4 in - 2.75 in)/2 = 0.625 in
Therefore, the depth of cut is 0.625 inches.
b) The material removal rate can be found by applying:
MRR = DOC x Width of cut x Feed rate
assuming we are using a standard carbide insert tool with a width of cut of 0.5 inches.
MRR = 0.625 in x 0.5 in x 0.010 in/rev = 0.003125 cubic inches per minute
c) The time required to complete the cutting pass is determined by:
Time = Length of cut / (Cutting speed x Width of cut x Feed rate)
Time = 48 in / (400 ft/min x (0.5 in) x (0.010 in/rev) x (1/12 ft/in)) = 20 minutes
Learn more about material removal rate at: https://brainly.com/question/13106351
#SPJ1
If all forces are equal and opposite how do things accelerate?
Answer:
It is true that in accordance with Newton's third law of motion, every action has an equal and opposite reaction, meaning that when one object exerts a force on another object, the second object exerts an equal and opposite force back on the first object. However, this does not necessarily mean that the objects will not accelerate.
Acceleration depends on the net force acting on an object, which is the sum of all forces acting on the object. If the forces are balanced (i.e. they are equal and opposite), then there is no net force and the object will not accelerate. However, if the forces are unbalanced (i.e. they are not equal and opposite), then there is a net force and the object will accelerate in the direction of the net force.
For example, if you push a book across a table with a force of 5 N to the right, the book will experience a force of 5 N to the left due to friction. These two forces are equal and opposite, but they are not balanced because they act in opposite directions. The net force on the book is therefore 5 N to the right, which causes the book to accelerate in that direction.
calculate the magnitude of the gravitational field of the sun at the location of earth, in meters per square second.
The magnitude of the gravitational field of the Sun at the location of Earth is approximately 9.81 m/s2.
This value is derived from Newton's Law of Universal Gravitation, which states that the gravitational force (F) between two objects is equal to the product of the two objects' masses (m1 and m2) multiplied by the gravitational constant (G) divided by the square of the distance between the two objects (r2):
F = G * m1 * m2 / r2
The mass of the Sun is 1.989 × 1030 kg, and the average distance between Earth and the Sun is 1.496 × 1011 meters. Therefore, plugging those values into the equation gives us:
F = 6.67 × 10-11 * 1.989 × 1030 * 5.972 × 1024 / (1.496 × 1011)2
F = 9.81 m/s2
Read more about the topic of gravitation:
https://brainly.com/question/72250
#SPJ11
A small grinding wheel has a moment of inertia of 4. 0×10−5 kg⋅m2
k
g
⋅
m
2. What net torque must be applied to the wheel for its angular acceleration to be 150 rad/s2
r
a
d
/
s
2
?
A net torque of [tex]6.0×10^−3 N⋅m[/tex] is sufficient to produce the desired angular acceleration of [tex]150 rad/s^2[/tex].
The net torque required to produce an angular acceleration in a rotating object can be calculated using the formula: net torque = moment of inertia × angular acceleration In this case, the moment of inertia of the grinding wheel is given as 4.0×10^−5 kg⋅m^2 and the angular acceleration required is 150 rad/s^2.
Therefore, the net torque required can be calculated as: net torque = [tex](4.0×10^−5 kg⋅m^2) × (150 rad/s^2) = 6.0×10^−3 N⋅m[/tex]To explain this result, we need to understand the relationship between torque and angular acceleration. Torque is the rotational equivalent of force and it is defined as the product of force and the perpendicular distance between the line of action of the force and the axis of rotation.
When a torque is applied to a rotating object, it produces an angular acceleration in the object, which is a measure of how quickly the object's rotational speed changes.
The moment of inertia of an object is a measure of its resistance to changes in its rotational motion. It depends on the object's mass distribution and the distance of each element of mass from the axis of rotation. Objects with larger moments of inertia require more torque to produce a given angular acceleration than objects with smaller moments of inertia.
Learn more about angular acceleration here:
https://brainly.com/question/29428475
#SPJ4
phase of the moon where only a very small part of the lit surface is seen from earth is called?
The phase of the moon where only a very small part of the lit surface is seen from the earth is called the crescent moon phase.
This phase occurs when the illuminated portion of the moon is less than half, but not yet a new moon. When the crescent moon appears in the sky, it is usually visible in the west just after sunset and looks like a thin curved shape. The crescent moon is visible for a few days, after which it transitions into the first quarter moon phase. The phases of the moon are a result of the moon's changing position relative to the sun and the earth.
As the moon orbits the earth, different parts of its surface are illuminated by sunlight. This is why we see different phases of the moon as it rotates around the earth. The phases of the moon include the new moon, waxing crescent, first quarter, waxing gibbous, full moon, waning gibbous, third quarter, and waning crescent. The crescent moon phase is just one of these eight phases.
To learn more about Moon :
https://brainly.com/question/13086036
#SPJ11
if stars a and b are both main-sequence stars and star a has a greater fusion rate than star b, which of the following statements hold(s)? check all that apply. A. star a must be more luminous than star b. B. star a must be less luminous than star b. C. star a must be more massive than star b. D. star a must be less massive than star b.
If stars A and B are both main-sequence stars and star A has a greater fusion rate than star B, the following statements hold:
A. Star A must be more luminous than star B.
C. Star A must be more massive than star B.
This is due to the direct relationship between a main-sequence star's brightness and mass and the rate of fusion in that star. A higher fusion rate, therefore, suggests a higher brightness and mass.
StarA star is a large, bright ball of gas that is held together by its own gravity. They create the energy and light that enable life on Earth and serve as the foundation of galaxies.In space, gas and dust clouds collide under the force of their own gravity to generate stars.Nuclear fusion starts when the cloud's center reaches roughly 10 million degrees Celsius as it warms up and falls. This is how hydrogen atoms come together to create helium, unleashing a massive quantity of energy in the form of heat and light.The star can retain a steady size and form because the energy produced by fusion produces an outward pressure that balances the pull of gravity.learn more about luminous here
https://brainly.com/question/25030787
#SPJ1
Do all waves travel at the same speed in different materials
No, not all waves move through various materials at the same pace. The characteristics of the medium itself, the kind of wave, and the frequency of the wave are only a few of the variables.
that affect how quickly a wave moves through a given medium. Sound waves, for instance, go through various materials at varying rates, depending on the density and elasticity of the medium. In general, solids transmit sound more quickly than liquids or gases do. Similar to how sound waves go through various materials at various rates, depending on the refractive index of the medium. Light waves, for example, constantly travel in a vacuum at a constant speed of around 299,792,458 meters per second (or about 186,282 miles per second). Nevertheless, as they go on.
learn more about speed here:
https://brainly.com/question/28224010
#SPJ4
which of the following is true regarding adipocere? 1. also known as grave wax. 2. created by a hydrolysis reaction. 3. is chemically similar to a soap. 4. is created from a carbohydrate.
Adipocere, also referred to as corpse wax, grave wax, or mortuary wax is an organic substance with a wax-like texture that results from the hydrolysis of fat in tissues, including body fat in deceased bodies, by anaerobic bacteria.
Option 1 is true: Adipocere is also known as grave wax.
Option 2 is partially true: Adipocere is formed by a chemical reaction called saponification, which is the breakdown of fats in adipose tissue by the hydrolysis action of enzymes or bacteria.
Option 3 is true: Adipocere is chemically similar to soap because it is a type of fatty acid salt, specifically a calcium or magnesium salt of fatty acids.
Option 4 is false: Adipocere is not created from a carbohydrate, but rather from the breakdown of fat in the body.
Learn more about saponification:
https://brainly.com/question/14018257
#SPJ11
a ford ranger has a mass of 2835 kg is traveling at a velocity of 55 mph down a mountain road in colorado. what distance in feet will it travel if the ramp had a 25% inclinvce
The distance in feet the Ford Ranger will travel can be calculated using the formula is 5,939.66 ft.
Distance (ft) = Velocity (mph) × Time (s) × 0.6818
In this case, Velocity = 55 mph, Time = Unknown.
Using the incline, we can calculate the time it takes the Ford Ranger to travel the given distance:
Time = Distance/[Velocity × (1 + Incline/100)]
Distance = 2835 kg × 9.81 m/s2 × 25% = 7101.75
time = 7101.75/[55 × (1 + 25/100)] = 129.44 seconds
distance (ft) = 55 × 129.44 × 0.6818 = 5,939.66 ft
To find the distance a Ford Ranger with a mass of 2835 kg will travel if the ramp had a 25% incline while traveling at a velocity of 55 mph down a mountain road in Colorado, the following formula will be applied: distance = [velocity² / (2 × acceleration)] × sin(2×angle of incline)
Let's find the acceleration using the formula:
a = (v² - u²) / 2s
where, a = acceleration = final velocity, u = initial velocity = distance
Therefore, a = (55² - 0²) / 2 × s = 166.25 / s... equation [1]
Now, let's find the sine of the angle of incline sin25° = 0.4226
Therefore, the distance the Ford Ranger will travel on a ramp with a 25% incline while traveling at a velocity of 55 mph down a mountain road in Colorado is given by; distance = [55² / (2 × (166.25 / s))] × sin(2 × 25°)
distance = 5,939.66 ft.
Read more about distance here:
https://brainly.com/question/26550516
#SPJ11
Give a counterexample to show that the following construction fails to prove that the class of context-free languages is closed under the star operation. Let A be a CFL that is generated by the CFG G = (V, σ, R, S). Add the new rule S → SS and call the resulting grammar G0 . It is hoped that G0 generates A∗ .
Consider the following counterexample to prove that the construction fails to prove that the class of context-free languages is closed under the star operation:
Let A be a context-free language that consists of only one word "a".
So, the grammar for A would be as follows: G = ({S}, {a}, {S → a}, S)
Let A* be the concatenation of any number of words of A including 0 words.
Hence, A* = {ε, a, aa, aaa, aaaa, …}
Now, construct G0 by adding the new rule S → SS to G.
So, the grammar G0 would be as follows: G0 = ({S}, {a}, {S → a, S → SS}, S)
According to the construction, we can say that G0 generates A* if A is a context-free language.
However, A* can be shown as not context-free using pumping lemma for context-free languages.
Hence, we can say that G0 does not generate A* although A is a context-free language. Thus, the construction fails to prove that the class of context-free languages is closed under the star operation.
To know more about "context-free language" refer here:
https://brainly.com/question/29762238#
#SPJ11
The total resistance R produced by three conductors with resistances RììR2ìRz con¬nected in a parallel electrical circuit is given by the formula 1/R = 1/R1 + 1/R2 +1/R3 Find enterpret the result in terms of the circuit.
The reciprocals of the resistances in a parallel circuit with three conductors are added to determine the overall resistance using the formula 1/R = 1/R1 + 1/R2 + 1/R3.
The total resistance of a parallel electrical circuit with three conductors and resistances R1, R2, and R3 is calculated using the formula 1/R = 1/R1 + 1/R2 +1/R3. The conductors of a parallel circuit are linked so that the voltage across each wire is the same, but the current flowing through each conductor may vary. This indicates that the circuit's entire current is distributed among the three conductors. According to the formula, the circuit's overall conductance is equal to the sum of the conductances of its individual conductors. We may calculate the overall resistance of the circuit by calculating the reciprocal of the total conductance. This formula can be extended to circuits with any number of parallel conductors, making it a useful tool for calculating the total resistance of a circuit.
learn more about parallel circuits here:
https://brainly.com/question/11409042
#SPJ4
Now, select the Slits simulation at the bottom of the screen, and Light (red) for the type of wave, as before. Also, make sure there is a barrier with one slit, and use the tape measure as well as the slider bar below the slit to place it roughly 1290 nm away from the light source. Adjust the slit width to 300 nm. Finally, select the start button at the source location to begin producing the waves. Which statement best describes how the intensity of the wave depends on position along the screen? Selecting the Intensity checkbox will show a plot of the intensity on the screen. a)The intensity is large near the middle of the screen, then decreases to nearly zero, and then increases again as the distance from the middle of the screen increases. b)The intensity is a maximum near the middle of the screen (directly to the right of the source) and significantly decreases above and below the middle of the screen. c)The intensity is roughly constant.
Light intensity can be estimated using either the total wave output, luminosity, or brightness.
Thus, It is a measurement of the amount of power either emitted or reflected by a source. Intensity and luminosity work together to determine brightness.
Luminosity is the most widely used unit to measure light intensity because scientists typically find that examining the entire output spectrum is the most beneficial.
The intensity of light formula becomes eqI = fracLA/eq when luminosity L is substituted. The surface area of a sphere must be used as the denominator in the calculation to appropriately measure light intensity because light waves propagate in all directions.
Thus, Light intensity can be estimated using either the total wave output, luminosity, or brightness.
Learn more about Light intensity, refer to the link:
https://brainly.com/question/31790670
#SPJ12
1. A particle traveling around a circle at constant speed will experience an acceleration. - True or false2. The test-mass is referred to as m and it hangs from the test-mass riser. - True or false3. A particle travels 17 times around a 15-cm radius circle in 30 seconds. What is the average speed (in m/s) of the particle?- .5327 m/s4. What measurements will be made to determine the magnitude of the test-mass centripetal acceleration?- items 3 and 6(1) The mass of the test-mass.(2) The velocity of the test-mass.(3) The radius of the circular path.(4) The mass of the hanging mass.(5) The spring constant.(6) The period of the orbital motion.5. Before rotating the platform, the hanging mass is disconnected from the test mass and removed from the platform.- True or false6. A particle in uniform circular motion requires a net force acting in what direction? - towards the center of the circle7. The centripetal force acting on a particle is given byF = mv2/r. If the centripetal force and mass are kept constant, increasing the radius of the particle's circular path will mean that the particle's velocity must increase.- True or false
1. True.
2. True
3. The average speed of the particle is .5327 m/s.
4. All the given option will be made to determine the magnitude of the test-mass centripetal acceleration.
5. True.
6. A particle in uniform circular motion requires a net force acting towards the center of the circle.
7. True.
1. A particle traveling around a circle at constant speed will experience an acceleration because it is changing its direction and this requires an acceleration.
So statment is True.
2. The test-mass is referred to as m and it hangs from the test-mass riser. So statment is True.
3. This can be calculated using the equation
speed = distance / time
In this case, the distance is
2π * 15 cm = 94.25 cm
and the time is 30 seconds,
so the speed is 94.25 cm / 30 s = .5327 m/s.
4. To determine the magnitude of the test-mass centripetal acceleration, measurements will need to be made of the following items:
(1) the mass of the test-mass,
(2) the velocity of the test-mass,
(3) the radius of the circular path,
(4) the mass of the hanging mass,
(5) the spring constant, and
(6) the period of the orbital motion.
5. Before rotating the platform, the hanging mass is disconnected from the test mass and removed from the platform.
6. A particle in uniform circular motion requires a net force acting towards the center of the circle.
7. True. If the centripetal force and mass are kept constant, increasing the radius of the particle's circular path will mean that the particle's velocity must increase. This is because the centripetal force is equal to the mass of the particle multiplied by the velocity of the particle squared, divided by the radius. Therefore, as the radius increases, the velocity of the particle must increase in order to keep the centripetal force constant.
For similar question circular motion
https://brainly.com/question/106339
#SPJ11
if a satellite circulate around the earth at a height of 7323.77km above the earth's surface, given the earth radius is 3958.8 miles and mass is 5.98 x 10 kg, use G=6.674 X 10^-11 Nm^2/kg^2. find the perios of this satellite in unit hours? _______
The period of the satellite circulating the earth at the height of 7323.77km above the earth's surface is 2.14 hours.
We know that the radius of the Earth is 3958.8 miles, i.e. 6371 km, the mass of the Earth is 5.98*10²⁴kg and the height of the satellite is 7323.77 km
The formula used to find the period of a satellite is given by:-
[tex]T = 2\pi\sqrt{\frac{r^3}{GM}}[/tex]
Where, T = Period of the satellite, r = Radius of the satellite from the center of the earth, G = Gravitational constant, and M = Mass of the Earth.
We know that the height of the satellite from the surface of the earth is given by:-
[tex]R = r + h[/tex]
Where R = Radius of the earth, h = Height of the satellite from the surface of the earth.
Substituting the given values,
R = 6371 + 7323.77 = 13694.77 km = 8.5 miles
Therefore,
r = 13694.77 km
T = [tex]2\pi \sqrt \frac{r^3}{GM}[/tex]
= [tex]2\pi \sqrt\frac{13694.77^3}{(6.674 * 10^{-11} * 5.98 * 10^{24})}[/tex]
T = 128.85 minutes
Now, convert the time from minutes to hours by dividing by 60:-
Period of the satellite = T = 128.85/60 = 2.14 hours
Learn more about mass: https://brainly.com/question/25959744
#SPJ11
observations indicate that over billions of years, galaxies in general tend to change from _________.
Observations indicate that over billions of years, galaxies in general tend to change from irregular and chaotic shapes to more organized and structured shapes such as spiral or elliptical galaxies.
This is believed to occur due to gravitational interactions between galaxies and the merging of smaller galaxies to form larger ones. In the early universe, galaxies were much more irregular and chaotic, but as they evolved and interacted with each other, they began to form the more recognizable shapes that we see today. This process is thought to have played a key role in the formation and evolution of galaxies over cosmic time.
To know more about elliptical galaxies, here
https://brainly.com/question/14243370?referrer=searchResults
#SPJ4
Metamorphism means "a change in form." How a rock may change during metamorphism?
Metamorphism is a geological process that involves the transformation of pre-existing rocks into new types of rocks through changes in temperature, pressure, and chemical composition.
During metamorphism, rocks undergo significant changes in their physical, mineralogical, and structural properties.
One common change that occurs during metamorphism is recrystallization, where the mineral grains in a rock grow larger or change shape, resulting in a coarser texture. This occurs due to high temperatures and pressures that cause the atoms in the minerals to rearrange themselves.
Another common change is foliation, which is the development of a layered or banded structure in a rock due to the alignment of mineral grains. Foliation occurs when rocks are subjected to differential stress, where the pressure is greater in one direction than in another. This can result in the development of slate, schist, or gneiss from previously existing sedimentary, igneous, or metamorphic rocks.
Metamorphism can also cause changes in the chemical composition of a rock, such as the addition or removal of certain minerals. This can occur due to the circulation of fluids, such as water or magma, which can react with the rock and alter its composition.
Overall, metamorphism is a complex process that can result in a wide range of changes in rocks. These changes can create new types of rocks with unique properties and structures, and can provide important insights into the geological history and evolution of the Earth.
learn more about metamorphism here
https://brainly.com/question/12605044
#SPJ4
risks that can result in a system or process that will not work are known as
Risks that can result in a system or process that will not work are commonly known as "technical risks". These are risks that are related to the technical aspects of a system or process, such as hardware, software, or infrastructure.
Several things, including the following, can lead to technical risks: Complexity: Very complex systems and processes can be challenging to develop, implement, and maintain, as well as being more vulnerable to technical risks. Interdependencies: If one component fails or does not function properly, systems and processes that are extensively interconnected may be exposed to technical risks. Technical restrictions: Systems and procedures that must adhere to technical restrictions, such as those imposed by hardware or software, may be more vulnerable to technical risks. Technical hazards may be more likely to arise for systems and processes that must be integrated with other systems or processes if there are integration concerns.
Learn more about technical risks here:
https://brainly.com/question/13486956
#SPJ4
1 80 kg scaffold is 5.80 m long. it is hanging with two wires, one from each end. a 580 kg box sits 1 m from the left end. what is the tension in the right hand side wire?
The tension in the right-hand side wire is 6525 N.
Given:
Weight of the scaffold = 180 kgLength of the scaffold = 5.8 mWeight of the box = 580 kgDistance of the box from left end = 1 mLet the tension in the left wire = T1Let the tension in the right wire = T2To find: Tension in the right-hand side wireWe know that the sum of forces acting in a vertical direction should be equal to 0 as there is no acceleration in the vertical direction. ∑Fv = 0In the horizontal direction, there are no forces acting on the system.
∑Fh = 0Now considering forces in the vertical direction: T1 + T2 = (Weight of scaffold + Weight of the box) gT1 + T2 = (180 + 580) x 9.8T1 + T2 = 7644 N1. From the diagram, we can see that the box is nearer to the left side. Hence, the tension force in the left wire is greater than the tension force in the right wire.
T1 > T22. Let's take moments about the right end of the scaffold as shown in the figure below.
∑Mr = 0T1 × 5.8 = T2 × 1T2 = 5.8/1 × T1T2 = 5.8T1Now, we can substitute the value of T2 in equation (1):
T1 + T2 = 7644N6.8 T1 = 7644 N T1 = 1125 NTo find T2, we can substitute the value of T1 in equation (2):
T2 = 5.8 × T1T2 = 5.8 × 1125 N T2 = 6525 NTherefore, the tension in the right-hand side wire is 6525 N.
Learn more tension: https://brainly.com/question/4001686
#SPJ11
I need help with this please
Answer:
It is positive
Explanation:
The area is only concentrated with red protons
which of the following includes all common types of radioactive decay? a. atomic number, beta particle emission, electron capture B. alpha particle emission, beta particle emission, half-life C. alpha particle emission, beta particle emission, radioactive parent isotope D. alpha particle emission, beta particle emission, electron capture E. alpha particle emission, stable daughter, electron capture
Alpha particle emission, beta particle emission, and electron capture are all common types of radioactive decay.The correct answer is D.
They are common types of radioactive decay's because:
Alpha particle emission involves the emission of an alpha particle (a helium nucleus) from the nucleus of an atom. This reduces the atomic number by 2 and the mass number by 4.Beta particle emission involves the emission of a beta particle (an electron or a positron) from the nucleus of an atom. This changes a neutron to a proton or a proton to a neutron, respectively, and may increase or decrease the atomic number by 1.Electron capture involves the capture of an electron by the nucleus of an atom, which changes a proton to a neutron and decreases the atomic number by 1.Option D includes all of these types of radioactive decay (alpha particle emission, beta particle emission, and electron capture), so it is the correct answer
To learn more about radioactive decay:
https://brainly.com/question/11117468
#SPJ11
Which turbine takes the lesser amount of time to rotate through 1.0 radian of angular displacement? a. turbine A b. turbine B c. They take the same amount of time. d. The answer cannot be determined from the information given.
The correct option is C, The turbine that takes the lesser amount of time to rotate through 1.0 radian of angular displacement is both because They take the same amount of time.
A turbine is a device that converts kinetic energy from a fluid (such as water, steam, or air) into mechanical energy. It is composed of a series of rotating blades that are attached to a shaft. When the fluid flows over the blades, it causes them to rotate, which in turn rotates the shaft.
Turbines are commonly used in power generation to generate electricity. For example, in a hydroelectric power plant, water flows through a turbine, which spins a generator to produce electricity. Similarly, in a gas or steam turbine power plant, the combustion of fuel heats up air or water to create steam, which flows through a turbine to produce electricity.
To learn more about Turbine visit here:
brainly.com/question/30559123
#SPJ4
If the change in internal energy = 1714J, specific
heat capacity = 49J/°C/kg, and mass = 38kg,
what is the temperature change experienced?
Give your answer to 2 decimal places.
Answer:
0.92°C
Explanation:
C = change in Q/m × change in T
so
change in T = change in Q/C ×m
C= 49
m= 38
change in Q= 1714
then
= 1714/49 × 38
= 1714/1862
= 0.92°C
rounded off to 2 d.p
a roller coaster starts from rest at the top of a hill that is 18 m high. the car travels to the bottom of the hill and continues up the next hill which is 10 m high. how fast is the car moving at the top of the 10.0 m hill if friction is ignored?
The car is moving at a fast speed of 14.4 m/s at the top.
The formula for finding the velocity of the roller coaster is shown below: ½mv2=mgh.
Here,m is the mass of the roller coaster,v is the velocity of the roller coaster,
g is the acceleration due to gravity (9.8 m/s²), andh is the roller coaster's height above the ground.
At the top of the first hill, the roller coaster has a potential energy ofmgh=mg (18) = 18mg
Where,m is the mass of the roller coaster andg is the acceleration due to gravity (9.8 m/s²).
The velocity at the bottom of the first hill can be found using the conservation of mechanical energy:
kinetic energy + potential energy = kinetic energy + potential energy
½mv2 + mgh = ½mv2 + mghv2 = 2gh
At the bottom of the first hill, the kinetic energy is mgh.
The total mechanical energy at the bottom of the hill is thus mgh + mgh = 2mghv
2 = 2gh = 2 × 9.8 × 18v2 = 352.8v = 18.79 m/s
At the top of the second hill, the roller coaster's mechanical energy is once again equal to its potential energy:
potential energy = mgh = mgh = 10mgv = sqrt(2gh) = sqrt(2 × 9.8 × 10) = 14.4 m/s
Therefore, the velocity of the car at the top of the 10.0 m hill is 14.4 m/s.
To learn more about car, click here:
https://brainly.com/question/111325
#SPJ11
for each charge, determine the direction of the magnetic force. for the last one, determine the direction of the magnetic field. the sign of the charge is given for each part.
For each charge, the direction of the magnetic force can be determined using the right-hand rule. For the last one, the direction of the magnetic field can be determined by observing the direction of the current.
The right-hand formula can be used to calculate the direction of the magnetic field for each charge. According to the formula, if you aim your right thumb in the direction of the charged particle's velocity and your fingers in the direction of the magnetic field, the way your hand confronts is the magnetic force direction.
To identify the direction of the magnetic field for the final charge, examine the direction of the current. The magnetic field is perpendicular to the current and can also be calculated with the right-hand formula.
Learn more about right-hand rule:
https://brainly.com/question/27332584
#SPJ4
The planet Earth orbits around the Sun and also spins around its own axis 33% Part (a) Calculate the angular momentum of the Earth in its orbit around the Sun in kg m?/s Lorb 2.76 1040 Lorb 2.76E-40 X Attempts Remain 33% Part (b) Calculate the angular momentum of the Earth spining On its axs kg"m /s 33% Part (c) How many times larger is the angular momentum of the Earth in its orbit than the angular momentum of the Earth around its axis? Grade Summary Lorb Deductions 000
To calculate the angular momentum of the Earth in its orbit around the Sun, we use the formula:
L = Iω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
The moment of inertia of the Earth in its orbit around the Sun can be approximated as a point mass at the center of the orbit, so we have:
I = mr^2
where m is the mass of the Earth, and r is the radius of its orbit around the Sun.
The angular velocity of the Earth in its orbit around the Sun can be calculated as:
ω = v/r
where v is the velocity of the Earth in its orbit around the Sun.
Using the values of the mass of the Earth (m = 5.97 × 10^24 kg), the radius of its orbit around the Sun (r = 1.50 × 10^11 m), and the velocity of the Earth in its orbit around the Sun (v = 2.98 × 10^4 m/s), we have:
I = (5.97 × 10^24 kg) (1.50 × 10^11 m)^2 = 1.08 × 10^40 kg m^2
ω = (2.98 × 10^4 m/s) / (1.50 × 10^11 m) = 1.99 × 10^-7 rad/s
Therefore, the angular momentum of the Earth in its orbit around the Sun is:
L = Iω = (1.08 × 10^40 kg m^2) (1.99 × 10^-7 rad/s) = 2.15 × 10^33 kg m^2/s
What is the angular momentum of the Earth spining On its axs kg"m /s 33% Part?To calculate the angular momentum of the Earth spinning on its own axis, we use the same formula:
L = Iω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
The moment of inertia of the Earth spinning on its own axis can be approximated as a solid sphere, so we have:
I = (2/5)mr^2
where m is the mass of the Earth, and r is the radius of the Earth.
The angular velocity of the Earth spinning on its own axis is:
ω = 2π/T
where T is the period of rotation of the Earth.
Using the values of the mass of the Earth (m = 5.97 × 10^24 kg), the radius of the Earth (r = 6.37 × 10^6 m), and the period of rotation of the Earth (T = 24 hours = 8.64 × 10^4 s), we have:
I = (2/5) (5.97 × 10^24 kg) (6.37 × 10^6 m)^2 = 8.03 × 10^37 kg m^2
ω = 2π / (8.64 × 10^4 s) = 7.27 × 10^-5 rad/s
Therefore, the angular momentum of the Earth spinning on its own axis is:
L = Iω = (8.03 × 10^37 kg m^2) (7.27 × 10^-5 rad/s) = 5.84 × 10^33 kg m^2/s
The angular momentum of the Earth in its orbit around the Sun is approximately 2.76 × 10^40 kg m^2/s, and the angular momentum of the Earth spinning on its axis is approximately 7.06 × 10^33 kg m^2/s.
To find out how many times larger the angular momentum of the Earth in its orbit is compared to the angular momentum of the Earth spinning on its axis, we can simply divide the value obtained in part (a) by the value obtained in part (b):
2.76 × 10^40 kg m^2/s ÷ 7.06 × 10^33 kg m^2/s ≈ 3.91 × 10^6
Therefore, the angular momentum of the Earth in its orbit around the Sun is approximately 3.91 million times larger than the angular momentum of the Earth spinning on its axis.
Learn more about angular momentum of the Earthfrom
https://brainly.com/question/29563080
#SPJ1
Pensacola and Admiralty Head have very different tidal characteristics. Describe how a difference in location, shape of shoreline, and lunar declination likely contributes to the difference in tidal ranges and tidal patterns for these two locations.
The difference in location, shape of shoreline, and lunar declination likely contributes to the difference in the tidal ranges and tidal patterns for the two locations include landmasses and wave interaction.
What are tidal characteristics?The difference in tidal characteristics between Pensacola and Admiralty Head is likely due to the difference in location, shape of shoreline, and lunar declination. Location affects tidal ranges and patterns due to how different landmasses will interact with the waves.
The shape of the shoreline affects how the tides reflect and move in different directions. Lastly, lunar declination is a factor because the angle at which the moon is orbiting the earth affects the tides. This is because the gravitational pull of the moon varies with its distance and declination.
The differences in tidal characteristics between Pensacola and Admiralty Head can be attributed to the difference in location, shape of shoreline, and lunar declination, all of which have a direct impact on the tidal ranges and patterns of these two locations.
Learn more about Tidal characteristics here:
https://brainly.com/question/17587757
#SPJ11
which event triggers the creation of an action potential?
The opening of voltage-gated sodium channels triggers the creation of an action potential.
An action potential is a brief electrical signal that travels down the axon of a neuron. This signal is triggered by the opening of voltage-gated sodium channels in response to a stimulus, such as a chemical neurotransmitter binding to a receptor on the neuron's membrane. The influx of positively charged sodium ions depolarizes the membrane, creating an electrical signal that rapidly spreads down the axon. Once the signal reaches the end of the axon, it triggers the release of neurotransmitters, which can then bind to receptors on other neurons and continue the transmission of the signal.
To know more about action potential, here
brainly.com/question/8312195
#SPJ4
The temperature of a gas stream is to be measured by a thermocouple whose junction can be approximated as a 1.2-mm-diameter sphere. The properties of the junction are k = 35 W/m °C, rho= 8500 kg/m3 ,and Cp = 320 J/kg °C, and the heat transfer coefficient between the junction and the gas is h = 65 W/m2 °C. Determine how long it will take for the thermocouple to read %95 of the initial temperature difference.
It will take about 12.12 minutes for the thermocouple to read 95% of the initial temperature difference of the sphere. This is due to difference in temperature.
What is the time required to read 95% of initial temperature difference?
In order to determine how long it will take for the thermocouple to read 95% of the initial temperature difference, the following formula is used:
t = (rho × V × Cp)/(h × pi × D) × ln ((Tinitial - T∞) / (Tinitial - Tcutoff))
where, t = time (s), ρ = density (kg/m³), V = volume (m³), Cp = specific heat capacity (J/kg °C), h = heat transfer coefficient (W/m²°C), D = diameter (m), Tinitial = initial temperature (°C), T∞ = surrounding temperature (°C), Tcutoff = temperature at which the thermocouple reading is 95% of the initial temperature difference (°C).
Substituting the given values into the above formula:
t = (8500 kg/m³ × (4/3 × pi × (0.0006 m)³)) / (65 W/m2 °C × pi × 0.0012 m) × ln ((100 °C - 25 °C) / (100 °C - 95 °C))
t = 727.31 s or 12.12 minutes.
Therefore, it will take approximately 12.12 minutes for the thermocouple to read 95% of the initial temperature difference.
Learn more about Thermocouple here:
https://brainly.com/question/14555057
#SPJ11