4.
The area of the figure formed by joining the mid-points of the adjacent sides of a rhombus
with diagonals 16cm and 12cm is​

As per the given data, the value of x is not an integer, so the value of the perimeter of the rectangle will not be an integer. the perimeter of the rectangle is 54.4 cm (approx).

Given, Length of a rectangle= (4x+7)cm

Breadth of a rectangle= (5x-4)cm

Area of a rectangle= 209cm²

Area of the rectangle is given by the formula;

Area of the rectangle = Length × Breadth

Substituting the given values;

209 = (4x + 7) (5x - 4)

Simplify the above equation

209 = 20x² - 3x - 28

Simplifying further

20x² - 3x - 237 = 0

Factoring the equation

(4x + 19) (5x - 12) = 0

Either 4x + 19 = 0

Or 5x - 12 = 0

If 4x + 19 = 0x = -19/4 (N.V)

If 5x - 12 = 0

x = 12/5

Perimeter of the rectangle= 2(Length + Breadth)

Substituting the value of Length and Breadth in the above equation

2 (4x + 7 + 5x - 4) = 2 (9x + 3) = 18 (x + 1)

∴The value of x is 12/5 (2.4)

N.V - No Value

Therefore, the perimeter of the rectangle is

18 (x + 1) or 18(2.4+1) = 54.4 cm (approx).

Note: As per the given data, the value of x is not an integer, so the value of the perimeter of the rectangle will not be an integer.

To know more about integer visit:

https://brainly.com/question/490943

#SPJ11

The solutions to the equation 2cos(θ) + 1 = 0 on the interval 0 ≤ θ < 2π are θ = 2π/3 and θ = 8π/3.

The equation 2cos(θ) + 1 = 0 can be rearranged as cos(θ) = -1/2. This means we are looking for angles θ whose cosine is equal to -1/2. In the interval 0 ≤ θ < 2π, the solutions can be found using inverse trigonometric functions.

Since the cosine function has a period of 2π, we know that the solutions will repeat every 2π. The solutions for cos(θ) = -1/2 can be found by considering the unit circle or by using the trigonometric identity. One possible solution is θ = 2π/3, which corresponds to an angle where the cosine is equal to -1/2.

To find the other solutions, we can add or subtract multiples of the period 2π to the initial solution. Adding 2π to θ = 2π/3, we get θ = 2π/3 + 2π = 8π/3. This gives us a second solution. Similarly, subtracting 2π from the initial solution, we get θ = 2π/3 - 2π = -4π/3. However, since we are considering the interval 0 ≤ θ < 2π, the negative angle -4π/3 is not within this range.

Therefore, the solutions to the equation 2cos(θ) + 1 = 0 on the interval 0 ≤ θ < 2π are θ = 2π/3 and θ = 8π/3. These values satisfy the given equation and fall within the specified interval.

Learn more about inverse trigonometric functions here:

https://brainly.com/question/30284200

#SPJ11

The solution to the integral is ∫ (16x-130) / (x²-16x+63) dx = -ln|x-9| + 41ln|x-7| + C

Now, let's get into the details of the problem. We are given the integral:

∫ (16x-130) / (x²-16x+63) dx

To solve this integral, we first need to factor the denominator. We can factor it using the quadratic formula, which gives us:

x²-16x+63 = (x-9)(x-7)

Therefore, we can rewrite the integral as:

∫ (16x-130) / [(x-9)(x-7)] dx

To apply this technique, we need to first write the fraction as:

(16x-130) / [(x-9)(x-7)] = A/(x-9) + B/(x-7)

where A and B are constants that we need to find. We can find A and B by multiplying both sides by the common denominator and then equating the numerators. This gives us:

16x - 130 = A(x-7) + B(x-9)

Now, we can solve for A and B by substituting values of x that make one of the terms zero. For example, if we substitute x=9, we get:

16(9) - 130 = A(9-7) + B(9-9)

Simplifying this expression gives us:

2A = -2

Therefore, A = -1.

Similarly, if we substitute x=7, we get:

16(7) - 130 = A(7-7) + B(7-9)

Simplifying this expression gives us:

-2B = -82

Therefore, B = 41.

Now that we have found A and B, we can rewrite the original fraction as:

(16x-130) / [(x-9)(x-7)] = -1/(x-9) + 41/(x-7)

Using this decomposition, we can integrate the original function by integrating each term separately. This gives us:

∫ (16x-130) / [(x-9)(x-7)] dx = ∫ [-1/(x-9) + 41/(x-7)] dx

= -ln|x-9| + 41ln|x-7| + C

where C is the constant of integration.

To know more about integral here

https://brainly.com/question/18125359

#SPJ4

The evaluation of 2u + v at u = (2, -1, 2) and v = (1, 2, -2) is (5, 0, 2).

(b) The evaluation of u · v at u = (2, -1, 2) and v = (1, 2, -2) is -4.

(c) The vectors u and v make an obtuse angle.

(a) To evaluate 2u + v, where u = (2, -1, 2) and v = (1, 2, -2), we perform vector addition:

2u + v = 2(2, -1, 2) + (1, 2, -2)

      = (4, -2, 4) + (1, 2, -2)

      = (4+1, -2+2, 4+(-2))

      = (5, 0, 2)

Therefore, 2u + v = (5, 0, 2).

(b) To evaluate u.v, we perform the dot product of the vectors u = (2, -1, 2) and v = (1, 2, -2):

u.v = (2)(1) + (-1)(2) + (2)(-2)

   = 2 - 2 - 4

   = -4

Therefore, u.v = -4.

(c) To determine whether the vectors u and v make an acute, right, or obtuse angle, we can examine their dot product.

If the dot product is positive, the angle between the vectors is acute; if it is negative, the angle is obtuse; and if it is zero, the angle is right.

In this case, u.v = -4, which is negative. Hence, the vectors u and v make an obtuse angle.

Therefore, the vectors u and v make an obtuse angle.

Learn more about vector addition

brainly.com/question/23867486

#SPJ11

The domain of the linear function T(x) = 0.15(x - 1500) + 150 can be written as [1500, 56200]. This is the set of possible values for the adjusted gross income, x.

In this case, the domain is the range of values between $1500 and $56,200, inclusive. So the domain can be written as [1500, 56200].

(b) To find the tax bill for an adjusted gross income of $13,000, we substitute x = 13000 into the function T(x) and calculate the result:

T(13000) = 0.15(13000 - 1500) + 150 = 0.15(11500) + 150 = 1725 + 150 = $1875.

In the function T(x), the adjusted gross income, x, is the independent variable because it is the input to the function. The tax bill, T(x), is the dependent variable because it depends on the value of x.

To graph the linear function T(x), we plot points on a coordinate system using different values of x within the specified domain [1500, 56200]. Each point will have coordinates (x, T(x)) where T(x) is calculated using the given formula.

To find the adjusted gross income for a tax bill of $4110, we need to solve the equation 4110 = 0.15(x - 1500) + 150 for x. Rearranging the equation, we get 3960 = 0.15(x - 1500). Dividing both sides by 0.15 gives (x - 1500) = 26400. Adding 1500 to both sides, we find x = 27900. So a single filer's adjusted gross income would be $27,900 if the tax bill is $4110.

Learn more about linear function here:

https://brainly.com/question/29205018

#SPJ11

The surface area of a triangular prism is the area that is occupied by its surface. It is the sum of the areas of all the faces of the prism. Hence, the formula to calculate the surface area is Surface area = (Perimeter of the base × Length) + (2 × Base Area) = (a + b + c)L + bh.

A=5

B=8

C=5

H=12

A=2AB+(a+b+c)h

AB=s(s﹣a)(s﹣b)(s﹣c)

s=a+b+c/2

A=ah+bh+ch+1/2﹣a4+2(ab)2+2(ac)2﹣b4+2(bc)2﹣c4=5·12+8·12+5·12+12﹣54+2·(5·8)2+2·(5·5)2﹣84+2·(8·5)2﹣54=240

The surface area of the triangular prism is 240in²

I hoped this helped and if im wrong you have every right to report me <3

The eigenvalues of the given matrix are 4, 2, 0, and 0, with corresponding eigenvectors given by [1, sin(πn/5), sin(2πn/5), sin(3πn/5)] for eigenvalue 4, [1, sin(πn/5), sin(2πn/5), sin(3πn/5)] for eigenvalue 2, [0, cos(πn/5), cos(2πn/5), cos(3πn/5)] for eigenvalue 0 (n ≠ 0), and [0, 1, -2, 1] and [1, 0, 0, 0] for eigenvalue 0 (n = 0).

To find the eigenvalues and eigenvectors, we start by using the sine transform. Let S be the 4x4 sine matrix, i.e., the entry in the i-th row and j-th column of S is given by sin(πij/5). Then, we can write the given matrix as M = 3I + S + S^T, where I is the 4x4 identity matrix.

Next, we find the eigenvalues of S. Since S is a real symmetric matrix, its eigenvalues are real and its eigenvectors are orthogonal. By inspection, we see that the columns of S are orthogonal and have length 2, so the eigenvalues of S are given by λn = 2(1 - cos(πn/5)) for n = 1, 2, 3.

Now, we can find the eigenvalues of M. Since M = 3I + S + S^T, the eigenvalues of M are given by μn = 3 + λn + λm, where λn and λm are the eigenvalues of S. Thus, we have μ1 = 4, μ2 = 2, and μ3 = μ4 = 0.

To find the eigenvectors of M, we need to solve the equations (M - μnI)x = 0 for each eigenvalue μn. For μ1 = 4, we have (M - 4I)x = (S - 2I)(S^T - 2I)x = 0, which has non-trivial solutions of the form [1, sin(πn/5), sin(2πn/5), sin(3πn/5)] for n = 1, 2, 3, 4.

Similarly, for μ2 = 2, we have solutions of the form [1, sin(πn/5), sin(2πn/5), sin(3πn/5)] for n = 1, 2, 3, 4. For μ3 = 0, we have solutions of the form [0, cos(πn/5), cos(2πn/5), cos(3πn/5)] for n ≠ 0. Finally, for μ4 = 0, we have two linearly independent solutions: [0, 1, -2, 1] and [1, 0, 0, 0].

For more questions like Matrix click the link below:

https://brainly.com/question/28180105

#SPJ11

The Taylor series of g about 0 is given by 1 - 4t^2 + 16t^4 - 64t^6 + ... The coefficients a2n and a2n+1 are given by a2n = (-1)^n * 4^n/(2n+1) and a2n+1 = 0. The radius of convergence for the series is R = 1/2sqrt(2).

The Taylor series of g about 0 is given by:

g(t) = ∑[n=0 to infinity] ((-1)^n * 4^n * t^(2n))/(2n+1)

That this is the sum of a geometric series with first term a=1 and common ratio r=-4t^2. Therefore, we can use the formula for the sum of an infinite geometric series to get the Taylor series of g. The formula is:

S = a/(1-r)

Plugging in our values, we get:

g(t) = 1/(1+4t^2) = 1 - 4t^2 + 16t^4 - 64t^6 + ...

To find the coefficients a2n and a2n+1, we just need to look at the terms that have even and odd powers of t:

a2n = (-1)^n * 4^n/(2n+1)

a2n+1 = 0

The radius of convergence for the series is R = 1/2sqrt(2). We can see this by using the ratio test:

lim[n→∞] |a_n+1/a_n| = 4t^2/(2n+3) → 1 as n → ∞

Therefore, the series converges for |t| < 1/2sqrt(2).

To know more about geometric series, visit;

https://brainly.com/question/24643676

#SPJ11

The double integral is 1270.5.

To set up a double integral that represents the area of the surface given by z = f(x, y) above the region R, where [tex]f(x, y) = x^2 - 4xy - y^2[/tex] and R = {(x, y): 0 ≤ x ≤ 9, 0 ≤ y ≤ x}.

We can express the area as the double integral of the function f(x, y) over the region R.

The double integral can be written as:

A = ∬R f(x, y) dA

where dA represents the infinitesimal area element.

Since the region R is defined by 0 ≤ x ≤ 9 and 0 ≤ y ≤ x, we can express the limits of integration for x and y accordingly. The integral becomes:

A = ∫₀⁹ ∫₀ˣ (x² - 4xy - y²) dy dx

Here, the outer integral goes from x = 0 to x = 9, and the inner integral goes from y = 0 to y = x.

The double integral to calculate the area above the region R is given by:

A = ∫₀⁹ ∫₀ˣ (x² - 4xy - y²) dy dx

Integrating the inner integral with respect to y first, we get:

A = ∫₀⁹ [x²y - 2xy² - y³/3]₀ˣ dx

Simplifying this expression, we have:

A = ∫₀⁹ (x³ - 2x²y - y³/3) dx

Now, integrating with respect to x, we get:

A = [x⁴/4 - 2x³y/3 - y³x/3]₀⁹

Substituting the limits of integration, we have:

A = (9⁴/4 - 2(9)³(9)/3 - (9)³(9)/3) - (0⁴/4 - 2(0)³(0)/3 - (0)³(0)/3)

Simplifying further, we get:

A = (6561/4 - 2(729)/3 - (729)/3) - (0)

A = 6561/4 - 1458 - 243

A = 5082/4

A = 1270.5

Therefore, the desired result is 1270.5.

Learn more about double integral

brainly.com/question/2289273

#SPJ11

False. Proportionality between the slopes of a constraint and the objective function is not a general property in optimization. The relationship between these slopes depends on the specific problem and can vary.

The proportionality between the slopes of a constraint and the objective function is not a universal principle in optimization. It is true that in some cases, there may be a proportional relationship between these slopes. This means that if the slope of a constraint increases or decreases, the slope of the objective function will also increase or decrease by a proportional amount. However, it is important to note that this proportionality is not a fundamental characteristic of all optimization problems.

In many optimization problems, the slopes of constraints and the objective function may have different behaviors and may not be directly related. The slopes can vary independently based on the specific problem structure, constraints, and objective function. In some cases, the slopes may even have an inverse relationship, meaning that an increase in the slope of a constraint leads to a decrease in the slope of the objective function, or vice versa.

In conclusion, while proportionality between the slopes of a constraint and the objective function can occur in some optimization problems, it is not a general property and does not hold true for all scenarios. The relationship between these slopes is problem-dependent and can vary significantly.

Learn more about independently : brainly.com/question/31707382

#SPJ11

The probability of getting a five-card hand with only red cards is approximately 0.0253, or about 2.53%.

There are 52 cards in a deck, and 26 of them are red. To find the probability of getting a five-card hand with only red cards, we can use the hypergeometric distribution:

P(only red cards) = (number of ways to choose 5 red cards) / (number of ways to choose any 5 cards)

The number of ways to choose 5 red cards is the number of 5-card combinations of the 26 red cards, which is:

C(26,5) = (26!)/(5!(26-5)!) = 65,780

The number of ways to choose any 5 cards from the deck is:

C(52,5) = (52!)/(5!(52-5)!) = 2,598,960

So the probability of getting a five-card hand with only red cards is:

P(only red cards) = 65,780 / 2,598,960 ≈ 0.0253

Therefore, the probability of getting a five-card hand with only red cards is approximately 0.0253, or about 2.53%.

To know more about probability refer here:

https://brainly.com/question/30034780

#SPJ11

To correctly identify formatted scientific notation, we need to look for numbers expressed in the form of a × 10^b, where "a" is a number between 1 and 10, and "b" is an integer.

Here are the correctly formatted scientific notations from the options provided:

- 8 × 10^6 (this is equivalent to 8,000,000)
- 6.1 × 10^12 (this is equivalent to 6,100,000,000,000)
- 0.802 × 10^4 (this is equivalent to 8,020)
- 4.532 × 10^-9 (this is equivalent to 0.000000004532)

The other options are not in the correct scientific notation format.

Know more about integer here:

https://brainly.com/question/929808

#SPJ11

So, the unit vector in the direction of maximal increase is: (-1/16, -1/16) / (1/16 √(2)) = (-1/√(2), -1/√(2))

To find the direction of maximal increase for the function f at point P(1,2), we need to find the gradient vector ∇f(x,y) and evaluate it at point P.

First, we calculate the partial derivatives of f with respect to x and y:

∂f/∂x = -1/(4x^2y^2)

∂f/∂y = -1/(2xy^3)

Then, the gradient vector is:

∇f(x,y) = (∂f/∂x, ∂f/∂y) = (-1/(4x^2y^2), -1/(2xy^3))

Evaluating at point P(1,2), we get:

∇f(1,2) = (-1/16, -1/16)

This means that the direction of maximal increase for f at point P is in the direction of the gradient vector, which is (-1/16, -1/16).

To express this direction as a unit vector, we need to divide the gradient vector by its magnitude:

||∇f(1,2)|| = √((-1/16)^2 + (-1/16)^2) = 1/16 √(2)

To know more about unit vector,

https://brainly.com/question/28193994

#SPJ11

The frequency of heterozygous individuals in the population of piranhas can be calculated using the Hardy-Weinberg equilibrium equation. The dominant allele 'A' occurs with a frequency of 0.8, Assuming that the recessive allele 'a' occurs with a frequency of 0.2 .

According to the Hardy-Weinberg equilibrium, the frequency of heterozygous individuals (Aa) can be determined using the formula 2 xp xq, where p represents the frequency of the dominant allele and q represents the frequency of the recessive allele. In this case, p = 0.8 and q = 0.2. By substituting the values into the equation, we can calculate the frequency of heterozygous individuals as follows: Frequency of heterozygous individuals = 2 x 0.8 x0.2 = 0.32. Therefore, the frequency of heterozygous individuals in the population of piranhas is 0.32, or 32% (rounded to two decimal places). This means that approximately 32% of the individuals in the population carry both the dominant and recessive alleles, while the remaining individuals are either homozygous dominant (AA) or homozygous recessive (aa).

Learn more about Hardy-Weinberg equilibrium here:

https://brainly.com/question/16823644

#SPJ11

The required answer is (f −1)'(-9) = -2√13/9.

To find (f −1)'(a), we first need to find the inverse function f −1(x).

Using the given function f(x) = x3 + 7x − 1, we can find the inverse function by following these steps:
1. Replace f(x) with y:
y = x3 + 7x − 1
The informal descriptions above of the real numbers are not sufficient for ensuring the correctness of proofs of theorems involving real numbers. The realization that a better definition was needed. Real numbers are completely characterized by their fundamental properties that can be summarized

2. Swap x and y:
x = y3 + 7y − 1
3. Solve for y:
0 = y3 + 7y − x + 1
We need to find the inverse function , Unfortunately, finding the inverse function for f(x) = x^3 + 7x - 1 is not possible algebraically due to the complexity of the function. A number is a mathematical entity that can be used to count, measure, or name things. The quotients or fractions of two integers are rational numbers.

Using the cubic formula, we can solve for y:
y = [(x - 4√13)/2]1/3 - [(x + 4√13)/2]1/3 - 7/3
Therefore, the inverse function is:
f −1(x) = [(x - 4√13)/2]1/3 - [(x + 4√13)/2]1/3 - 7/3
Now we can find (f −1)'(a) by plugging in a = -9:
(f −1)'(-9) = [(−9 - 4√13)/2](-2/3)(1/3) - [(−9 + 4√13)/2](-2/3)(1/3)
(f −1)'(-9) = [(−9 - 4√13)/2](-2/9) - [(−9 + 4√13)/2](-2/9)
(f −1)'(-9) = (4√13 - 9)/9 - (9 + 4√13)/9
(f −1)'(-9) = -2√13/9

Therefore, (f −1)'(-9) = -2√13/9.

To know more about inverse function Click on the link.

https://brainly.com/question/2541698

#SPJ11

the  probability that you will either get a yellow or blue marble is (c) 0.714.

The total number of marbles in the bag is 7 + 8 + 13 = 28.

The probability of getting a yellow marble is 7/28 = 0.25.

The probability of getting a blue marble is 13/28 = 0.464.

The probability of getting either a yellow or a blue marble is the sum of these probabilities:

0.25 + 0.464 = 0.714

what is probability?

Probability is a measure of the likelihood of an event occurring. It is expressed as a number between 0 and 1, where 0 indicates that the event is impossible and 1 indicates that the event is certain to occur. Probability can also be expressed as a percentage, ranging from 0% to 100%.

To learn more about probability visit:

brainly.com/question/11234923

#SPJ11

The 5th quasi-random number in the base-5 low-discrepancy sequence is 0.2 in base-10.(C)0.5)

To determine the 5th quasi-random number in a base-p low-discrepancy sequence with a base of 5, we need to convert the decimal number 5 into base-p and find the 5th digit after the decimal point.

To convert the number 5 into base-p, we divide 5 by p and continue dividing the quotient by p until we obtain a fractional part less than 1. Let's assume that p is 10 for simplicity.

5 / 10 = 0.5

Since the fractional part is less than 1, we have our conversion: 5 in base-10 is equivalent to 0.5 in base-p.

Now, since we are looking for the 5th digit after the decimal point, we can conclude that the answer is:

c) 0.5

Please note that the exact digit in base-p may vary depending on the specific base used and the implementation of the low-discrepancy sequence.

To calculate the 5th quasi-random number in the base-5 low-discrepancy sequence, we can use the Van der Corrupt sequence formula, which is:

V(n, b) = (d_1 / b + d_2 / b^2 + ... + d-k / b^k)

where n is the index of the sequence, b is the base, and d_1, d_2, ..., d-k are the digits of n in base b.

For n = 5 and b = 5, we have k = 1 and d_1 = 1, so:

V(5, 5) = 1 / 5 = 0.2

Therefore, the 5th quasi-random number in the base-5 low-discrepancy sequence is 0.2 in base-10.

To know more about  random here

https://brainly.com/question/30789758

#SPJ4

The focus of the parabola in this problem is given as follows:

B. (3, -1).

The equation of the parabola in this problem is given as follows:

-8(x - 5) = (y + 1)².

Hence the coordinates of the vertex are given as follows:

(5, -1).

The parameter p, used to obtain the coordinates of the focus, are given as follows:

4p = -8

p = -8/4

p = -2.

Hence the coordinates of the focus of the horizontal parabola are given as follows:

(5 - 2, -1) = (3, -1).

More can be learned about the equation of a parabola at https://brainly.com/question/4061870

#SPJ1

The line integral ∫(2x+4y)ds over the curve C is evaluated.

Given the vector function r(t) = ⟨2t, 3t^2⟩, the curve C is the parametric equation of the path of integration. To find the line integral, we first find the derivative of r(t) with respect to t, which is dr/dt = ⟨2, 6t⟩.

Then, we compute the magnitude of dr/dt as ds/dt = √(2^2 + 6t^2) = 2√(1+9t^2). The limits of integration are determined by the parameter t, where t goes from 0 to 1. Thus, the line integral can be evaluated as ∫(2x+4y)ds = ∫(4t+12t^2)2√(1+9t^2) dt = 32/27(10√10-1).

For more questions like Integral click the link below:

https://brainly.com/question/22008756

#SPJ11

Answer:

Step-by-step explanation:

a) The function f(t) that models the number of bears t years after 2012 can be expressed using exponential decay, as follows:

f(t) = 965 * (0.98)^(t)

Where 0.98 represents the rate of decline of 2% per year. The starting point for t is 0, which corresponds to the year 2012.

b) To find the population of bears predicted to be in 2020, we need to evaluate f(8) since 2020 is 8 years after 2012:

f(8) = 965 * (0.98)^(8)

= 834.84 (rounded to two decimal places)

Therefore, the predicted population of bears in 2020 is approximately 835.

(A) The leading term is -8x^5.
(B) The limit of p(x) as x approaches 0 is 16.
(C) The limit of p(x) as x approaches infinity is negative infinity.

(A) The leading term of a polynomial is the term with the highest degree.

In this case, the highest degree term is -8x^5.

Therefore, the leading term of the polynomial p(x) = 16+2x^4-8x^5 is -8x^5.

(B) To find the limit as x approaches 0, we can simply substitute 0 for x in the polynomial p(x).

Doing so gives us:

p(0) = 16 + 2(0)^4 - 8(0)^5
p(0) = 16

Therefore, the limit of p(x) as x approaches 0 is 16.

(C) To find the limit as x approaches infinity, we need to look at the leading term of the polynomial.

As x gets larger and larger, the other terms become less and less significant compared to the leading term.

In this case, the leading term is -8x^5. As x approaches infinity, this term becomes very large and negative.

Therefore, the limit of p(x) as x approaches infinity is negative infinity.

In summary:

(A) The leading term is -8x^5.
(B) The limit of p(x) as x approaches 0 is 16.
(C) The limit of p(x) as x approaches infinity is negative infinity.

Know more about limit here:

https://brainly.com/question/282767

#SPJ11

In the given two triangles, ΔABC↔ΔYZX, the angle A corresponds to the angle Y. Therefore, we can write: ∠A = ∠Y. The measurements for each of the following sides and angles can be found by using the following properties of congruent triangles.

If two triangles are congruent, then: the corresponding angles are congruent the corresponding sides are congruent (in other words, they have the same length).Therefore, we have:∠A = ∠Y  (corresponding angles)AC = ZX  (corresponding sides)BC = YX (corresponding sides)Line segment XY = BC = 5 cm   (Given in the diagram)Now, we will find the value of AC by using the Pythagoras Theorem in triangle ABC. Here, we are looking for the length of the hypotenuse AC.

The Pythagoras Theorem states that: in a right-angled triangle, the square of the hypotenuse is equal to the sum of the squares of the other two sides. Applying this theorem in triangle ABC, we have:AB² + BC² = AC²Given AB = 4 cm and BC = 5 cm, we can substitute these values in the above equation to find the value of AC.4² + 5² = AC²16 + 25 = AC²41 = AC²Taking the square root on both sides, we get: AC = √41 cm Therefore, we can write: AC = √41 cm ∠A = ∠ Y Line segment XY = BC = 5 cm

To know more about measurements  visit:

brainly.com/question/28913275

#SPJ11

The domain of the function is R - {m} and the range of the function is (-∞, ∞).

We are given a function f: R−{n}→R defined by f(x) = (x-n)/(x-m), where m ≠ n.

To find the domain of the function, we need to consider the values of x for which the denominator (x-m) is zero. Since m ≠ n, we have m - n ≠ 0, and therefore the function is defined for all x except x = m.

Therefore, the domain of the function is R - {m}.

To find the range of the function, we can consider the behavior of the function as x approaches infinity and negative infinity. As x approaches infinity, the numerator (x-n) grows without bound, while the denominator (x-m) also grows without bound, but at a slower rate. Therefore, the function approaches positive infinity.

Similarly, as x approaches negative infinity, the numerator (x-n) becomes very negative, while the denominator (x-m) also becomes very negative, but at a slower rate. Therefore, the function approaches negative infinity.

Thus, we can conclude that the range of the function is (-∞, ∞).

In summary, the domain of the function is R - {m} and the range of the function is (-∞, ∞).

To know more about function  click on below link :

https://brainly.com/question/29145252#

#SPJ11

a region refers to a specific part of a space, typically a subset of a plane, a three-dimensional space or higher-dimensional space.

1. To find the area between the two functions, we need to find their intersection points. Setting f(x) = g(x), we have:

-7x^3 + 4x^2 - 5 = -6x^3 - 5x^2 - 5

-x^3 + 9x^2 = 0

x^2(x - 9) = 0

So x = 0 or x = 9. We can verify that f(x) > g(x) for x in between, so the area is given by:

∫[0, 9] (f(x) - g(x)) dx

= ∫[0, 9] (-x^3 + 9x^2) dx

= [-¼ x^4 + 3 x^3]_0^9

= 81/4 square units

2. To find the area between the two functions over the given interval, we need to evaluate:

∫[33, 34] (f(x) - g(x)) dx

= ∫[33, 34] (-x - 18) dx

= [-½ x^2 - 18x]_33^34

= -671/2 square units

3. To find the area between the two functions over the given interval, we need to evaluate:

∫[8, 12] (f(x) - g(x)) dx

= ∫[8, 12] (-x^3 - 17x^2 + 70x) dx

= [-¼ x^4 - 17/3 x^3 + 35x^2]_8^12

= 68 square units

4. The region is shown below:

perl

Copy code

        |      /

        |    /

        |  /

        |/

---------*---------

       /|

     /  |

   /    |

 /      |

We need to integrate from y = 0 to y = 5. At y = 0, we have x = -5, and at y = 5, we have x = 5. So the area is given by:

∫[0, 5] [√(25 - y) - (y - 10)] dy

= ∫[0, 5] (√(25 - y) - y + 10) dy

= [2/3 (25 - y)^(3/2) - ½ y^2 + 10y]_0^5

= 125/6 square units

5. The solid is a cylinder with a frustum on top. The radius of the cylinder is 1, and its height is 1. The height of each frustum is given by h = l/4, where l is the length of the base of the frustum. Since the base of the frustum is a circle of radius r, we have l = 2√(r^2 - h^2). So we need to find the volume of the frustum from h = 0 to h = 1. At a given height h, the radius of the frustum is r = √(1 - h)^2 = 1 - h. So the volume of the frustum is given by:

∫[0, 1] π (1 - h)^2 (2√(1 - h^2))/4 dh

= π/2 ∫[0, 1] (1 - h)^2 √(1 - h^2) dh

= [π/8 (-6 (1 - h)^3 - (1

To learn more about three-dimensional visit

brainly.com/question/27271392

#SPJ11

By using the multiplication rule for transposes,  (cd)^t = d^t c^t  it is proved that the inverse of a^t is (a^- 1 )^t.The multiplication rule of transposes states that , the transpose of the product of two matrices is equal to the product of their transposes in the reverse order.

Follow the steps below to prove that inverse of a^t is (a- 1 )t,  (Let us assume A = a):

Thus, we have verified that the inverse of A^T is indeed (A^-1)^T. Therefore it is proved that  inverse of a^t is (a^- 1 )^t.

To learn more about inverse : https://brainly.com/question/3831584

#SPJ11

The question that needs to be answered is "A collection of 40 coins is made up of dimes and nickels and is worth $2.60. Find how many were dimes and how many were nickels. According to the solving 28 dimes and 12 nickels were there.

"Given, There are 40 coins in total. Let the number of nickels be x and the number of dimes be y. Then the total value of coins is $2.60, which can be expressed in terms of the number of nickels and dimes:x + y = 40 ...(1)0.05x + 0.10y = 2.60  ...(2)Multiplying the first equation by 0.05, we get:

0.05x + 0.05y = 2 ... (3)

Subtracting equation (3) from equation (2), we get:

0.10y - 0.05y

= 2.6 - 2

=> 0.05y

= 0.6

=> y = 12

We can use the elimination method to solve the equations.

Multiplying equation (1) by 0.05, we get:

0.05x + 0.05y = 2 ...(3)

Now, subtracting equation (3) from equation (2), we get:

0.10y - 0.05y = 2.60 - 2 => 0.05y = 0.6 => y = 12

Therefore, the number of dimes is 28 (40-12) and the number of nickels is 12. Answer: 28 dimes and 12 nickels were there.

To know more about Subtracting equations visit:

https://brainly.com/question/12063954

#SPJ11

The exact value of cos θ is -5/13. In quadrant III, the cosine function is negative.

In quadrant III, the sine function is negative and given as sin θ = -12/13. Using the Pythagorean identity sin^2θ + cos^2θ = 1, we can find the value of cos θ.

sin^2θ = (-12/13)^2

1 - cos^2θ = (-12/13)^2

cos^2θ = 1 - (-144/169)

cos^2θ = 169/169 + 144/169

cos^2θ = 313/169

Since θ is in quadrant III, where the cosine function is negative, we take the negative square root:

cos θ = -√(313/169)

Rationalizing the denominator:

cos θ = -√(313)/√(169)

cos θ = -√(313)/13

Therefore, the exact value of cos θ is -5/13.

For more questions like Function click the link below:

https://brainly.com/question/16008229

#SPJ11

Answer: The paint mixer should mix 2.75 gallons of 30% gloss paint and 1 gallon of 15% gloss paint to make 3.75 gallons of paint that is 20% gloss.

To calculate the number of gallons of each paint that the mixer should mix, we need to use the formula: C1V1 + C2V2 = C3V3, where C1 and V1 are the concentration and volume of the first paint, C2 and V2 are the concentration and volume of the second paint, and C3 and V3 are the concentration and volume of the mixture. Using this formula and the given information, we can set up the equation:0.30V1 + 0.15V2 = 0.20(3.75)Simplifying the equation, we get:V1 + V2 = 3.75And, rearranging it, we get:V2 = 3.75 - V1.Substituting this in the first equation, we get:0.30V1 + 0.15(3.75 - V1) = 0.20(3.75).Simplifying and solving for V1, we get:V1 = 2.75.

Therefore, the mixer should mix 2.75 gallons of 30% gloss paint and 1 gallon of 15% gloss paint to make 3.75 gallons of paint that is 20% gloss.

Know more about concentration here:

https://brainly.com/question/29268747

#SPJ11

The number more of Michael's friends that like pizza compared to his neighbors are 2 more of his friends.

First, let's calculate how many of Michael's friends and neighbors like pizza:

55% of his 40 friends like pizza, so the number of his friends who like pizza is:

=  55 / 100 x 40

= 22

80% of his 25 neighbors like pizza, so the number of his neighbors who like pizza is :

= 80 / 100 x 25

= 20

Therefore, 2 more of Michael's friends like pizza compared to his neighbors.

Find out more on friends at https://brainly.com/question/31299178

#SPJ1