Answer: The final temperature is 248.7 K
Explanation:
To calculate the final temperature of the system, we use the equation given by Gay lussac Law. This law states that pressure of the gas is directly proportional to the temperature of the gas at constant volume.
Mathematically,
[tex]\frac{P_1}{T_1}=\frac{P_2}{T_2}[/tex]
where,
[tex]P_1\text{ and }T_1[/tex] are the initial pressure and temperature of the gas.
[tex]P_2\text{ and }T_2[/tex] are the final pressure and temperature of the gas.
We are given:
[tex]P_1=951.72kPa\\T_1=653.34K\\P_2=362.29kPa\\T_2=?[/tex]
Putting values in above equation, we get:
[tex]\frac{951.72}{653.34}=\frac{362.29}{T_2}\\\\T_2=248.7K[/tex]
Thus the final temperature is 248.7 K
Write the chemical formula for magnesium nitrate hexahydrate
Answer: Mg(NO₃)₂ * 6 H₂O
Explanation:
What is the total number of pairs of electrons that one carbon atom shares?
Answer:
4
Explanation:
A carbon atom has 4 electrons in its outermost shell (2s^2p^2). All are unpaired (none share their orbital with another electron). So all four are anxious to pair with another electron. Once it has found 4 more electrons contributed from other atom(s), it will have 4 pairs of shared electrons.
Hydrogen has one lone electron. An atom of H is downright gleeful in sharing it's electron with elements such as carbon, C. Since carbon has 4 unpaied electrons, it will combine with 4 H atoms. At that point, cabon is sharing 4 electron pairs.
In the electrolysis of water, how long will it take to produce 165.0 L of H2 at 1.0 atm and 273 K using an electrolytic cell through which the current is 113.0 mA?
In the electrolysis of water, 3490 hour will it take to produce 165.0 L of H2 at 1.0 atm and 273 K using an electrolytic cell through which the current is 113.0 mA.
What is Ideal Gas Law ?The ideal gas law states that the pressure of gas is directly proportional to the volume and temperature of the gas.
It is expressed as
PV = nRT
where,
P = Pressure
V = Volume in liters
n = number of moles of gas
R = Ideal gas constant
T = Temperature in kelvin
Here,
P = 1.0 atm
V = 165.0 L
R = 0.0821 atm. L/mol.K (Ideal gas constant)
T = 273 K
n = ?
Now put the value in above expression, we get
PV = nRT
1.0 atm × 165.0 L = n × 0.0821 atm. L/mol.K × 273 K
165.0 atm. L = n × 22.4 atm. L/mol
[tex]n = \frac{165.0\ \text{atm. L}}{22.4\ \text{atm. L/mol}}[/tex]
n = 7.36 mol
The reaction is
2H⁺ + 2e⁻ → H₂
1 mol of electrons is produced from 96500 C
So,
[tex]96500 \frac{C}{\text{mol} \times e} \times 2e \times 7.36\ \text{mol}[/tex]
= 1,420,480 C
Convert milliampere to C/s
1mA = 0.001 C/s
113.0 mA = 113.0 × 0.001
= 0.113 c/s
What is relationship between current, charge and time ?The relation between current, charge and time is expressed as:
[tex]I = \frac{Q}{t}[/tex]
where,
I = Current
Q = Charge in Coulomb
t = time
Now put the value in above formula we get
[tex]I = \frac{Q}{t}[/tex]
[tex]= \frac{1,420,480\ C}{0.113\ C/s}[/tex]
= 12,570,619.469 s
= 3490 hour
Thus from the above conclusion we can say that In the electrolysis of water, 3490 hour will it take to produce 165.0 L of H2 at 1.0 atm and 273 K using an electrolytic cell through which the current is 113.0 mA.
Learn more about the Ideal Gas Law here: https://brainly.com/question/25290815
#SPJ4
A gas sample of 2.31 atm of oxygen gas and 3.75 atm of hydrogen gas that react to form water vapor. Assume the volume of the container and the temperature inside the container does not change.
Mole fraction of Oxygen=0.381
Mole fraction of Oxygen= (range of moles of oxygen) ÷(general moles)
also, mole fraction of oxygen = (partial stress of oxygen) ÷ (total strain)
consequently , mole fraction of Oxygen= (2.31 atm)÷(2.31 atm + 3.75 atm)
= 0.381
The mole fraction may be calculated by means of dividing the variety of moles of 1 element of a solution by the entire quantity of moles of all the additives of a solution. It is cited that the sum of the mole fraction of all of the components inside the solution should be identical to 1.
Mole fraction is a unit of awareness. in the solution, the relative amount of solute and solvents are measured by way of the mole fraction and it's far represented through “X.” The mole fraction is the variety of moles of a selected aspect inside the answer divided by way of the entire range of moles in the given answer.
Mole fraction is the ratio between the moles of a constituent and the sum of moles of all ingredients in a mixture. Mass fraction is the ratio between the mass of a constituent and the full mass of a mixture.
The question is incomplete. Please read below to find the missing content.
Assuming that only the listed gases are present, what would the mole fraction of oxygen gas be for each of the following situations? A gas sample of 2.31 atm of oxygen gas and 3.75 atm of hydrogen gas react to form water vapor. Assume the volume of the container and the temperature inside the container does not change.
Learn more about the mole fraction here https://brainly.com/question/14783710
#SPJ1
How many moles of hcl are required to make 500 ml of a 3.0 mol/l solution of hcl?
Answer:
1.5 moles
Explanation:
To find the number of moles of HCl in 500 mL of a 3 M solution of HCl, we consider moles in 1 liter/ 1000 mL.
3 moles HCl is contained in 1000 mL
x moles is HCl is contained in 500 mL
[tex] = \frac{3 \: \times \: 500}{1000} \: moles \\ = 1.5 \: moles[/tex]
Hence the number of moles of HCl in 500 mL is 1.5 moles.
Suppose you had to titrate a solution of NaOH of unknown concentration with a solution of HCl of known concentration using phenolphthalein as an indicator. How will you determine the color change
When the system turns pink, then the end point has been attained.
What is the end point?The end point or the equivalence point is the time when the reactants have undergone transformation in accordance with the reaction equation. The reaction in this case is; HCl + NaOH -----> NaCl + H2O.
We know that phenolphthalein is colorless in acid but red in a base. The color at end point is pink. Thus, when the system turns pink, then the end point has been attained.
Learn more about end point:https://brainly.com/question/4518249
#SPJ1
A ____________ is a planar, six-membered ring used to represent the cyclic form of glucose and other sugars.
Answer:
Haworth projection (14.3)
please give me brainliest
What Is the amount of a particular substance in a given quantity of a mixture; substances move from high to low?
The amount of a particular substance in a given quantity of a mixture is the concentration.
Substances move from high concentration to low concentration.
What is the amount of a substance?The amount of a particular substance in a given quantity of a mixture is known as the concentration of that substance.
The amount of solute in a specific amount of solution is how concentrated a material is.
The concentration of a substance can be expressed as molar concentration or mass concentration.
Molarity, or the number of moles of solute in one liter of solution, is the standard unit of concentration expression.
Learn more about molarity and concentration at: https://brainly.com/question/14469428
#SPJ1
Given an end diastolic volume (EDV) of 120 ml / beat and an end systolic volume (ESV) of 50 ml / beat, the stroke volume (SV) would be ________.
70 ml would be the stroke volume (SV) every beat.
Given,
End Diastolic Volume(EDV) = 120 ml/beat
End Systolic Volume(ESV) = 50 ml/beat
According to the formula
Stroke volume = End Diastolic Volume(EDV) - End Systolic Volume(ESV)
Stoke volume = 120 ml/beat - 50 ml/beat
Stroke volume = 70 ml/beat
The amount of blood in the ventricles just before the heart contracts is known as end-diastolic volume.
End-systolic volume (ESV) is the amount of blood in a ventricle at the point where systole, or contraction, ends and diastole, or filling, begins.
At any time during the cardiac cycle, the ESV has the lowest blood volume in the ventricle.
The amount of blood that is pumped out of the left ventricle of the heart with each systolic cardiac contraction is referred to as the stroke volume.
Learn more about stroke volume here https://brainly.com/question/19584309
#SPJ1
brittleness is a physical property that differs from one kind of material to another. truefalse
It is true that brittleness is a physical property that differs from one kind of material to another.
Physical qualities of a substance are those that can be seen without changing the substance's identity.
If a material splits under stress with low elastic deformation and little to no substantial plastic deformation, it is considered brittle.
Brittleness is a physical property as it alters the shape of the substance but not the identity of substance.
For example - the brittleness of chalk is different than the brittleness of glass. Thus we can say that the brittleness of chalk's material is different than the brittleness of glass's material.
Learn more about brittleness -
https://brainly.com/question/21999939
#SPJ4
How many moles of water are
in 1.23x10¹8 water molecules?
[ ? ]×10[?]
Answer:
2.04 x 10⁻⁶ moles H₂O
Explanation:
To find the moles H₂O, you need to multiply the given value by Avogadro's Number. This number is a ratio between molecules and moles, thus granting you the way to convert between both units. It is important to arrange the ratio in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the sig figs of the given value (1.23 x 10¹⁸ molecules).
Avogadro's Number:
6.022 x 10²³ molecules = 1 mole
1.23 x 10¹⁸ molecules H₂O 1 mole
--------------------------------------- x ------------------------------------- =
6.022 x 10²³ molecules
= 2.04 x 10⁻⁶ moles H₂O
According to the following thermochemical equation, what mass of HF (in g) must react in order to produce 690 kJ of energy
3.00 ×10² g of HF.
What is thermochemical equation?A Thermochemical Equation is a balanced stoichiometric chemical equation that includes the enthalpy change, ΔH. In variable form, a thermochemical equation would look like this:
A + B → C. ΔH = (±) #
The thermochemical reaction is of two types:
Endothermic Reaction Those thermochemical reactions in which heat is absorbed. Change in enthalpy for this reaction is positive.
Exothermic Reaction Exothermic reactions are the reaction in which the heat or the energy is evolved during the reaction.
SiO2 + 4 HF(g) → SiF4(g) + 2 H20(l) ΔH®rxn=-184 kJ
to learn about thermochemical equation go to - brainly.com/question/2874342
#SPJ4
Please help, Chemistry
The number of mole of Ag formed from the reaction of 8.0 moles of AgNO₃ and 5.0 moles of Zn, given the chemical reaction is 8 moles
How do I determine the number of mole of Ag formed?To know the number of mole of Ag formed, we'll begin by obtaining the limiting reactant. Details below:
2AgNO₃ + Zn -> 2Ag + Zn(NO₃)₂
From the balanced equation above,
2 moles of AgNO₃ reacted with 1 mole of Zn
Therefore,
8 moles of AgNO₃ will react with = (8 × 1) / 2 = 4 moles of Zn
From the above calculation, 8 moles of AgNO₃ requires only 4 moles out of 5 moles of Zn given. Thus, AgNO₃ is the limiting reactant
Finally, we shall determine the number of moles of Ag formed. This is shown below:
From the balanced equation above,
2 moles of AgNO₃ reacted to produce 2 moles of Ag
Therefore,
8 moles of AgNO₃ will also react to produce 8 moles of Ag
In conclusion, we can say that the number of mole of Ag formed is 8 moles
Learn more about number of mole:
https://brainly.com/question/23350512
https://brainly.com/question/13375719
#SPJ1
‼️PLEASE HELP ASAP, DUE TODAY, GIVING BRAINLIEST‼️
The five elements of chemical change include colour change, precipitate or gas formation, odour change, temperature change, and gas or precipitate formation.
How do I determine which indication to employ?When choosing an indicator for acid-base titrations, pick one whose pH range is compatible with the reaction's pH change. As an illustration, the pH quickly rises from 3 to 11 when a strong acid and base are titrated.
An indication in a chemical process is what?Chemical indicator: Any substance that can be used to detect the presence or absence of a chemical species at a threshold concentration in a solution, such as an acid or an alkali, usually by changing colour. Methyl yellow is a good illustration of this.
To know more about chemical process visit:-
https://brainly.com/question/21182404
#SPJ1
during a neutralization reaction phosphoric acid reacts with potassium hydroxide to produce potassium phosphate and water. if the reaction occurs with 64.9% yield, what mass of potassium phosphate would be made if 13.32g of potassium hydroxide is added to excess phosphoric acid?
During a neutralization reaction phosphoric acid reacts with potassium hydroxide to produce potassium phosphate and water, the reaction occurs with a 64.9% yield.
A neutralization reaction is a chemical process in which an acid and a base combine to produce salt and water as the end products. In a neutralization process, a mixture of H+ ions and OH- ions results in the formation of water.
Potassium phosphate and water are created when potassium hydroxide and phosphoric acid combine. The reaction's balanced equation is as follows: K3PO4(aq) + 3H2O = 3KOH(aq) + H3PO4(aq) (l) If six moles of potassium hydroxide react, phosphoric acid is used in the reaction.
To learn more about neutralization reaction please visit -
https://brainly.com/question/26786272
#SPJ1
4. Are these forces balanced or unbalanced? What is the net force on the car? Explain.
Answer:
The net force is zero
Explanation:
Newton's Third law states that every action/ force has an equal but opposite reaction, if the car pushing on the ground, the ground is pushing on the car.
A student dissolves a spoon full of table salt (sodium chloride) in a glass of water.
After the salt is completely dissolved, the major entities in the glass (other than the
water itself) are:
(select all that apply)
Sodium chloride crystals
Aqueous sodium ions
Chlorine gas
Solid sodium metal
Liquid sodium metal
Aqueous chloride ions
Answer:
Aqueous sodium ions, Aqueous chloride ions
Explanation:
Sodium chloride dissociates into Na+ and Cl- ions in water
Sodium chloride crystals may also be present in case of saturated solution
1. Name each of the following binary compounds or ionic compounds with polyatomic ions.
a) LiBr
b)Cal2
Bonds are securities that can be readily bought and sold. A bond issue consists of a number of bonds, usually in denominations of:_______
A bond issue consists of a number of bonds, usually in denominations of $1,000 and $5,000.
What are bonds and securities?The term bond refers to a sort of investment in which an individual loans money to the government or sometimes to the government in return for an interest on the investment. This interest is paid to the individual regularly as a return on his/ her investment.
Hence a bond issue consists of a number of bonds, usually in denominations of $1,000 and $5,000.
Learn more about bonds and securities:https://brainly.com/question/18652458
#SPJ1
Missing parts;
Bonds are securities that can be readily bought and sold. A bond issue consists of a number of bonds, usually in denominations of ______ or _____ and is sold to many different lenders.
Multiple choice question.
$100; $1,000
$1,000; $10,000
$500; $5,000
$1,000; $5,000
The pictures represent three different states of matter.
Which order of pictures places molecules with the
most amount of motion to the least amount of motion?
OX-Y-Z
OZ Y-X
OY-Z-X
OY X-Z
Answer:
OX-Y-Z
Explanation:
its the correct answer
The correct order from the most amount of motion( Kinetic energy) to the least amount of motion is Y (gas), Z (liquid), and X (ice). The correct answer is C, Y-Z-X.
In the given sequence, the states of matter with the most amount of motion (kinetic energy) to the least amount of motion are as follows:
Y - Gas (highest kinetic energy, molecules move freely and quickly in all directions)
Z - Liquid (intermediate kinetic energy, molecules have some freedom of movement but are more closely packed than in a gas)
X - Ice (lowest kinetic energy, molecules are tightly packed and have minimal movement, as it is in a solid state)
This sequence reflects the increasing freedom of movement and mobility of molecules as they transition from a solid to a liquid to a gas state.
Thus, the correct option is C.
To know more about Kinetic energy, click here:
https://brainly.com/question/999862
#SPJ5
It is always feasible that a substance will dissolve in water when:
A. Enthalpy is negative and entropy is positive.
B. Enthalpy is negative and entropy is negative.
C. Enthalpy is positive and entropy is positive.
HELP PLEASE 15 points
The free energy is always negative and the dissolution is feasible when enthalpy is negative and entropy is positive. Option A
What is dissolution of a substance in water?Water is known as the universal solvent. Water is a polar substance hence it is often used to dissolve polar substances. It has a dipole and being that there is a high degree of electronegativity difference between the oxygen and the hydrogen atoms in water, it is feasible that the degree of hydrogen bonding between the two is high.
We know that dissolution is favored when there will be an increase in entropy as a result of that, that is; if more particles will appear. Now we know that ΔG = ΔH - TΔS.
Given the equation above, it then follows that the free energy is always negative and the dissolution is feasible when enthalpy is negative and entropy is positive. Option A
Learn more about enthalpy:https://brainly.com/question/3393755
#SPJ1
The water pressure on Mustafa as he dives is increasing at a rate of 0.9920.9920, point, 992 atmospheres (\text{atm})(atm)left parenthesis, start text, a, t, m, end text, right parenthesis per meter (\text{m})(m)left parenthesis, start text, m, end text, right parenthesis . What is the rate of increase in water pressure in atm/km
Based on the given scenario, the rate of increase in water pressure in atm/km is known to be 992 atm/km.
What is water pressure?Pressure is known to be that kind of force that is known to often pushes water via pipes.
Note that Water pressure is a tool that is often used to know or identify the flow of water from any given tap. The amount of pressure at one's tap is said to be often dependent on how high the service tank or water tower is above one's home.
Therefore since 1 atm/m = 1000 atm/km
Hence 0.992 atm/m :
= 0.992 x 1000
= 992 atm/km.
Therefore, Based on the given scenario, the rate of increase in water pressure in atm/km is known to be 992 atm/km.
Learn more about water pressure from
https://brainly.com/question/8562322
#SPJ1
What is the primary function of phosphoglycerides mentioned in this module?
Answer:
which one is isn't the one that is wrong
Explanation:
bang bang chocho train
what addition information is needed to convert an empirical formula calculation into a molecular formula calculation?
The additional information that needed to convert empirical formula calculation into molecular formula are percentage of the elements in the compound; molar mass; and molecular mass.
What is empirical formula?The empirical formula is the chemical formula of a compound which inform the proportions or rations of the elements present in the compound but it is not represent the actual numbers or arrangement of atoms. In short, empirical formula is the smallest possible number that element present in the formula. Empiric formula can be use to determine the molecular formula calculation because it is contain an information about number of atom of each element present in the formula.
Learn more about empirical formula here
https://brainly.com/question/1603500
#SPJ4
It takes 38. 6 kj of energy to vaporize 1. 00 mol of ethanol (mw: 46. 07 g/mol). What will be δssys for the vaporization of 11. 0 g of ethanol at 78. 4 °c?
Answer:
9.21 kJ is the enrgy required to vaporize 11.0 grams of ethanol.
Explanation:
Energy of vaporization can be stated as 38.6 kj/mole for ethanol. ["It takes 38. 6 kj of energy to vaporize 1. 00 mol of ethanol"]
11.0 grams of ethanol is not 1 mole. Calculate the moles of ethanol by dividing t=it's mass by its molar mass:
(11.0 grams)/(46.07 g/mole) = 0.2388 moles ethanol
(0.2388 moles ethanol)*(38.6 kj/mole) = 9.21 kJ is the enrgy required to vaporize 11.0 grams of ethanol.
How many grams of CO2 will be produced when 8.50 g of methane react with 15.9 g of O2, according to the following reaction? CH4(g) +2 O2(g) = CO2(g) +2 H2O(g)
Taking into account the reaction stoichiometry, 10.93 grams of CO₂ are formed when 8.50 g of methane react with 15.9 g of O₂.
Reaction stoichiometryIn first place, the balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
CH₄: 1 mole O₂: 2 molesCO₂: 1 moleH₂O: 2 molesThe molar mass of the compounds is:
CH₄: 16 g/moleO₂: 32 g/moleCO₂: 44 g/moleH₂O: 18 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
CH₄: 1 mole ×16 g/mole= 16 gramsO₂: 2 moles ×32 g/mole= 64 gramsCO₂: 1 mole ×44 g/mole= 44 gramsH₂O: 2 moles ×18 g/mole=36 gramsLimiting reagentThe limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.
Limiting reagent in this caseTo determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 16 grams of CH₄ reacts with 64 grams of O₂, 8.50 grams of CH₄ reacts with how much mass of O₂?
[tex]mass of O_{2} =\frac{8.50 grams of CH_{4}x64 grams of O_{2} }{16grams of CH_{4}}[/tex]
mass of O₂= 34 grams
But 34 grams of O₂ are not available, 15.9 grams are available. Since you have less mass than you need to react with 8.50 grams of CH₄, O₂ will be the limiting reagent.
Mass of CO₂ formedThe following rule of three can be applied: if by reaction stoichiometry 64 grams of O₂ form 44 grams of CO₂, 15.9 grams of O₂ form how much mass of CO₂?
[tex]mass of CO_{2} =\frac{15.9 grams of O_{2}x44 grams of CO_{2} }{64grams of O_{2}}[/tex]
mass of CO₂= 10.93 grams
Then, 10.93 grams of CO₂ are formed when 8.50 g of methane react with 15.9 g of O₂.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
The volume of water that must be added in order to dilute 40 ml of 9. 0 m hcl to a concentration of 6. 0 m is closest to.
The volume of water that must be add is 20 mL. Volume of water that must add is new volume after dilution minus initial volume.
How to determine the volume that must be add?As per data given:
Initial volume (V1) = 40 mL = 0.040 L
Initial molarity(C1) = 9.0 M
New molarity (C2)= 6.0 M
As we want to know to the new volume of water(V2). We have to use dilution formula where the formula is C1 x V1 = C2 x V2. So, the calculation would be:
9.0 x 0.040 = 6.0 x V2
V2 = 0.06 L
V2 = 60 mL
Since the addition water is the difference between V2 and V1:
Volume add = V2 -V1
Volume add = 60 - 40
Volume add = 20 mL
Learn more about dilution here
https://brainly.com/question/24881505
#SPJ4
Identify the negative radicals in the following substances:
i. table salt (NaCl)
ii. baking soda (NaHCO,)
iii. washing soda (Na₂CO₂)
iv. lime water (Ca(OH)₂)
The negative radicals will be [tex]Cl^-[/tex], [tex]HCO^-[/tex], [tex]CO_3^2^-[/tex], and [tex]OH^-[/tex] respectively.
What are negative radicals?They are the species that are negatively charged in ion forms.
[tex]NaCl --- > Na^+ + Cl^-[/tex]
[tex]NaHCO --- > Na^+ + HCO^-[/tex]
[tex]Na_2CO_3 --- > 2Na^+ + CO_3^2^-[/tex]
[tex]Ca(OH)_2 -- > Ca^2^+ + 2OH^-[/tex]
Thus, the negative radicals in each of the chemicals are [tex]Cl^-[/tex], [tex]HCO^-[/tex], [tex]CO_3^2^-[/tex], and [tex]OH^-[/tex] respectively.
More on negative radicals can be found here: https://brainly.com/question/2112149
#SPJ1
The negative radicals as as follows;
NaCl - Cl^-NaHCO3 - HCO3^-Na₂CO3 - CO3^2-Ca(OH)₂ - OH^-What are negative radicals?The negative radicals are the radicals that are negatively charged. Every ionic compound is composed of positively and negatively charged ions.
Let us now identify the negative radicals in the following ionic compounds;
NaCl - Cl^-NaHCO3 - HCO3^-Na₂CO3 - CO3^2-Ca(OH)₂ - OH^-Learn more about negative ions:https://brainly.com/question/269828
#SPJ1
the group numbers for carbon oxygen, nitrogen and sulpher.
Answer:
Carbon: 14
Oxygen: 16
Nitrogen: 15
Sulpher: 16
Given the following reactants, finish and balance the reaction:
Ca(s) + HCl(aq) -->
A. Ca + 2 HCl --> CaCl2 + H2
B. 2 Ca + 2 HCl --> 2 CaCl + H2
C. Ca + HCl --> CaCl + H
D. Ca + 2 HCl --> CaCl2 + 2H
The products of the reactants with the balanced chemical equation are:
3 Ca + 2 HCl → 3 CaCl₂ + H₂.
What is the chemical equation?A chemical equation involves reactants, products produced, and an arrow to show the direction of the reaction.
The chemical equation of the reaction in which the number of atoms of each element is the same on both sides of the equation is known as a balanced chemical equation.
The law of conservation of matter needed to be obeyed by a chemical equation. The total mass of all elements on the reactant side will be equal to the total mass of all elements on the product side in the balanced chemical equation.
Learn more about the chemical equation, here:
brainly.com/question/28294176
#SPJ1