7/9 + 5/6=???

I’m rushing to finish this I forgot to do it and I can’t figure it out!

Answer:

probably A

Step-by-step explanation:

Answer:

C

Step-by-step explanation:

When you cut a sphere, you get a circle

If tax is 6% and tip is 15%, the total cost of the dinner, including tax and tip, is $107.99.

To find the total cost of the dinner, we need to add the tax and tip to the pre-tax amount.

The tax on the food bill can be calculated by multiplying the pre-tax amount by the tax rate of 6%, which is:

Tax = 0.06 x $89.25 = $5.355

Next, we need to calculate the tip on the pre-tax amount. The tip rate is 15%, which is:

Tip = 0.15 x $89.25 = $13.39

Now, we can calculate the total cost by adding the pre-tax amount, tax, and tip, which is:

Total cost = $89.25 + $5.355 + $13.39 = $107.995

Rounding this amount to the nearest cent gives us:

Total cost = $107.99

To learn more about cost click on,

https://brainly.com/question/31433647

#SPJ1

Thus, the synchronous speed of an 8-pole generator in Europe would be 750 rpm.

The synchronous speed of an 8-pole generator in Europe would be determined by the frequency of the power supply. In most of Europe, the standard power supply frequency is 50 Hz.

To calculate the synchronous speed of the generator, we can use the following formula:

Synchronous Speed = (120 x Frequency) / Number of Poles

So for an 8-pole generator in Europe, the synchronous speed would be:

Synchronous Speed = (120 x 50) / 8 = 750 rpm

Therefore, the synchronous speed of an 8-pole generator in Europe would be 750 rpm.

However, it's important to note that this is the ideal speed at which the generator would operate if it were connected to a perfectly balanced load. In reality, the actual operating speed of the generator may be slightly different due to factors such as load fluctuations and mechanical losses.

Know more about the synchronous speed

https://brainly.com/question/31605298

#SPJ11

The expression for the statement is y = 4x + 14.

a) Expression for Florence's new number

Since Florence multiplies the whole number x by 4 and then adds 14 to the result. Therefore, the expression for y is:

y = 4x + 14

b) Factorization of Equation

To factorize the expression:

y = 4x + 14

We can look for common factors. In this case, there are no common factors to factorize further. Therefore, the expression remains as:

y = 4x + 14 = 2(2x + 7)

c) Explanation of answer

We can see that the expression for y contains the term 4x. Since 4 is a multiple of 2, it implies that 4x is also a multiple of 2. Adding 14 to any multiple of 2 will still result in an even number because even + even = even.

Therefore, we can conclude that y, which is equal to 4x + 14, is a multiple of 2.

Learn more about expression here:

https://brainly.com/question/1859113

#SPJ1

The definite integral of f(x) from a to b is:

∫[a, b] (x^3 - x) dx = (1/4)(b^4 - a^4) - (1/2)(b^2 - a^2)

To evaluate the definite integral of f(x) = x^3 - x, we need to first specify the limits of integration. Assuming the limits of integration are a and b, where a is the lower bound and b is the upper bound, we can use the following formula to evaluate the definite integral:

∫[a, b] f(x) dx = F(b) - F(a),

where F(x) is the antiderivative (or primitive) of f(x).

In this case, the antiderivative of f(x) is F(x) = (1/4)x^4 - (1/2)x^2 + C, where C is a constant of integration.

Using the formula above, we have:

∫[a, b] (x^3 - x) dx = F(b) - F(a) = [(1/4)b^4 - (1/2)b^2] - [(1/4)a^4 - (1/2)a^2]

Simplifying this expression, we get:

∫[a, b] (x^3 - x) dx = (1/4)(b^4 - a^4) - (1/2)(b^2 - a^2)

Therefore, the definite integral of f(x) from a to b is:

∫[a, b] (x^3 - x) dx = (1/4)(b^4 - a^4) - (1/2)(b^2 - a^2)

Learn more about definite integral

brainly.com/question/29974649

#SPJ11

We  have:

(a) ker(t) = {(x1, x2, x3, x4) | x1 = 3x3, x2 = -x3, x4 = t, where t is any scalar}

(b) nullity(t) = 1

(c) range(t) = span{(1, 1, -1), (-2, 5, 1), (-3, 3, 4)}

(d) rank(t) = 3

To find the kernel of the linear transformation, we need to find all vectors x such that t(x) = ax = 0. This means we need to solve the system of linear equations:

x1 - 2x2 - 3x3 = 0

x1 + 5x2 + 3x3 = 0

-x1 + x2 + 4x3 + x4 = 0

3x1 + x2 + 2x3 + x4 = 0

Putting this system into reduced row echelon form, we get:

1 0 -3 0

0 1 1 0

0 0 0 1

0 0 0 0

The pivot columns are 1, 2, and 4. So, the basic variables are x1, x2, and x4, while x3 is a free variable. So, the kernel of the linear transformation is given by:

ker(t) = {(x1, x2, x3, x4) | x1 = 3x3, x2 = -x3, x4 = t, where t is any scalar}

Therefore, the dimension of the kernel or nullity of t is 1, since there is only one free variable.

To find the range of the linear transformation, we need to find all vectors y such that y = t(x) = ax for some vector x. This is the span of the columns of the matrix A, which can be found by row reducing A to get:

1 0 0 0

0 1 0 0

0 0 1 0

0 0 0 0

The pivot columns are 1, 2, and 3, so the corresponding columns of A form a basis for the range of t. Therefore, the range of t is:

range(t) = span{(1, 1, -1), (-2, 5, 1), (-3, 3, 4)}

which has dimension 3. Thus, the rank of t is 3.

Therefore, we have:

(a) ker(t) = {(x1, x2, x3, x4) | x1 = 3x3, x2 = -x3, x4 = t, where t is any scalar}

(b) nullity(t) = 1

(c) range(t) = span{(1, 1, -1), (-2, 5, 1), (-3, 3, 4)}

(d) rank(t) = 3

Learn more about nullity here:

https://brainly.com/question/31322587

#SPJ11

Using the line plot, we can see that 13 persons talk less than 60 minutes on their phonse.

Here we have a line plot, each one of the points represents a person that talks a given amount of time in the phone.

Here we just need to count the number of points that are before the number 60 in the horizontal axis.

Then we can see:

10 ---> 2 points.

20 ---> 4 points.

40 ---> 4 points.

50 ---> 3 points

Adding that we have a total of 13 points, so there are 13 persons that talk less than 60 minutes per day.

Learn more about line plots at:

https://brainly.com/question/30143735

#SPJ1

The resource in Tableau that you can use to ask questions, get answers, and connect with other Tableau users is the Community.

The Tableau Community is a resource where users can connect with other Tableau users, ask questions, share knowledge, and get support. It is a platform for collaboration and learning, where users can find answers to their questions and learn from others in the community. The Community includes forums, user groups, blogs, and other resources where users can share ideas, best practices, and tips and tricks. It is a great resource for anyone looking to improve their Tableau skills or get help with a specific issue. The Tableau Community is a valuable tool for users of all skill levels, from beginners to experts, and is an essential part of the Tableau ecosystem.

Learn more about resource here

https://brainly.com/question/30553474

#SPJ11

a) The population model for Betaburgh is:P(t) = -105004t + 3000 b) The population of Alphaville in 2005 was approximately 5062 people. c) The population of Betaburgh will be 5000 people 0.019 years (or approximately 7 days) after 1990.

a) The population model for Alphaville is given by:

P"(t) = 45

Integrating with respect to t twice, we get:

P'(t) = 45t + C1

where C1 is a constant of integration.

Integrating P'(t) with respect to t, we get:

P(t) = (45/2)t^2 + C1t + C2

where C2 is another constant of integration.

Using the initial condition that Alphaville had a population of 5500 in 1990 (when t=0), we get:

P(0) = C2 = 5500

Therefore, the population model for Alphaville is:

P(t) = (45/2)t^2 + C1t + 5500

Similarly, the population model for Betaburgh is given by:

P'(t) = -105004

Integrating P'(t) with respect to t, we get:

P(t) = -105004t + C3

where C3 is a constant of integration.

Using the initial condition that Betaburgh had a population of 3000 in 1990 (when t=0), we get:

P(0) = C3 = 3000

Therefore, the population model for Betaburgh is:

P(t) = -105004t + 3000

b) To find the population of Alphaville in 2005 (when t=15), we plug in t=15 into the population model:

P(15) = (45/2)(15)^2 + C1(15) + 5500

We still need to find the value of C1. To do this, we use the fact that the rate of change in population in Alphaville was 45 people per year in 1990 (when t=0):

P'(0) = 45 = C1

Substituting this value into the population model, we get:

P(15) = (45/2)(15)^2 + 45(15) + 5500

P(15) = 5062.5

Therefore, the population of Alphaville in 2005 was approximately 5062 people.

c)

To find when the population of Betaburgh will be 5000, we plug in P(t)=5000 into the population model and solve for t:

-105004t + 3000 = 5000

-105004t = 2000

t = -0.019

This means that the population of Betaburgh will be 5000 people 0.019 years (or approximately 7 days) after 1990. However, since time cannot be negative, we can conclude that the population of Betaburgh will never reach 5000 people.

Learn more about integration at: brainly.com/question/31744185

#SPJ11

To state true or false for the statements about the reflected triangle, we have:

A. Side A'B' is the same length as side AB  is false.

B. Triangle ABC and Triangle A'B'C' are similar but not congruent is true.

C. Triangle ABC and Triangle A'B'C' are similar and congruent is false.

A. Side A'B' is the same length as side AB  is False.

A triangle reflected across the y-axis changes the sign of the x-coordinates of its vertices, but the y-coordinates do not change. Here, the x-coordinate of point A' would now be -1, that of point B' would be -3, and that of point C' would be -6. The y-coordinates would not change. So, the length of sides A'B' and AB would not be the same.

B. Triangle ABC and Triangle A'B'C' are similar but not congruent is true.

If a triangle is reflected and translated, its overall shape and size remain the same, but its direction changes. The triangles that result from it would be similar because their angles would be the same, but they would not be congruent because the lengths of their sides would be different.

C. Triangle ABC and Triangle A'B'C' are similar and congruent is false.

As explained in statement B, the triangles would be similar but not congruent. Triangles that are similar have equal angles but their corresponding sides are of the same ratio.

Learn more about reflected triangles at brainly.com/answer/expert verified

#SPJ1

v'' is nonzero

Assuming that v and P are defined in the context of linear algebra or vector calculus, where P is a plane and v is a vector not lying in P, we can proceed as follows:

Let {u1, u2} be an orthogonal basis of P. Then, any vector in P can be written as a linear combination of u1 and u2, i.e., as p = c1 u1 + c2 u2 for some constants c1 and c2.

We want to show that v' = v - projP(v) is nonzero, where projP(v) is the projection of v onto P. Since projP(v) lies in P, we can write projP(v) = c1 u1 + c2 u2 for some constants c1 and c2.

Then, v' = v - projP(v) = v - c1 u1 - c2 u2. Taking the derivative of v' with respect to time t, we get:

v'' = (v' - c1 u1' - c2 u2')' = v' - c1 u1'' - c2 u2''

Since {u1, u2} is a basis of P, it is also a linearly independent set. Thus, u1' and u2' are linearly independent, and so are u1'' and u2''. This means that the coefficients of u1'' and u2'' in v'' are nonzero, since v' is nonzero and the coefficients of u1 and u2 in v' are nonzero.

Therefore, v'' is nonzero, which means that v' and v have different directions. This implies that v does not lie in the plane P, since v' is the projection of v onto P, and Theorem 5.3.6 states that the projection of a vector onto a subspace has the same direction as the subspace.

To know more about projection refer here:

https://brainly.com/question/17262812

#SPJ11

The question gives us the angles from the two different satellites and the distance between them to find the distance to the UFO from the KA-121212 satellite. Therefore, we can solve this using trigonometry as follows:

Let the distance from the UFO to KA-121212 be x. Then, from SAL-111's perspective, the distance from the UFO is (x + 900) km (adding the distance between the two satellites to x).Now, using trigonometry:[tex]\begin{aligned}\tan 60^\circ &= \frac{x}{x + 900}\\ \sqrt{3}(x + 900) &= x \times \sqrt{3}\\ x(\sqrt{3} - 1) &= 900\sqrt{3}\\ x &= \frac{900\sqrt{3}}{\sqrt{3} - 1}\\ x &= 2303.53 \end{aligned}[/tex] Therefore, the distance from the KA-121212 satellite to the UFO is 2303.53 km.

To know more about satellites,visit:

https://brainly.com/question/28766254

#SPJ11

The total cost for a waiting line does NOT specifically depend on d. the cost of a lost customer.

The cost of a waiting line system is typically determined by the cost of waiting and the cost of providing service. The cost of waiting can include factors such as the value of customers' time and the negative impact of waiting on customer satisfaction. The cost of service can include factors such as employee wages and overhead costs. The number of units in the system can also have an impact on the total cost, as higher demand may require more resources and lead to longer wait times. However, the cost of a lost customer is not typically considered a direct cost of the waiting line system, as it is not directly related to the operation of the system itself but rather to the potential impact on business revenue and customer loyalty.

Learn more about customer here

https://brainly.com/question/12831236

#SPJ11

Since f(x) ≤ g(x) for all x in [a, b], it follows that the supremum of g on any subinterval is less than or equal to the supremum of f on that same subinterval. Thus, u(g) ≤ u(f).

To explain why u(f) ≥ l(f,p), we need to understand the definitions of upper sum (u(f)) and lower sum (l(f,p)):

1. The upper sum u(f) is defined as the sum of the areas of rectangles formed by taking the supremum (i.e., the maximum value) of the function on each subinterval and multiplying it by the width of the subinterval.

2. The lower sum l(f,p) is defined as the sum of the areas of rectangles formed by taking the infimum (i.e., the minimum value) of the function on each subinterval and multiplying it by the width of the subinterval.

3. Since the supremum of a function on a given subinterval is always greater than or equal to the infimum of the same function on that subinterval, we have that u(f) ≥ l(f,p) for any bounded function f and any partition p of [a, b]. This is because the rectangles used to form the upper sum will always have a larger area than the rectangles used to form the lower sum.

Now, to prove Lemma 7.2.6, which states that if f and g are bounded functions on [a, b] and f(x) ≤ g(x) for all x in [a, b], then l(f,p) ≤ l(g,p) and u(f) ≤ u(g), we can use the following argument:

1. For any partition p of [a, b], we have that l(f,p) ≤ u(f) and l(g,p) ≤ u(g) by definition.

2. Since f(x) ≤ g(x) for all x in [a, b], it follows that the infimum of f on any subinterval is less than or equal to the infimum of g on that same subinterval. Thus, l(f,p) ≤ l(g,p) for any partition p of [a, b].

3. Similarly, since f(x) ≤ g(x) for all x in [a, b], it follows that the supremum of g on any subinterval is less than or equal to the supremum of f on that same subinterval. Thus, u(g) ≤ u(f).

Therefore, we have shown that l(f,p) ≤ l(g,p) and u(f) ≤ u(g), as desired.

For more about subinterval:

https://brainly.com/question/31259780

#SPJ4

The consumer's surplus at a price level of p = 7 for the demand equation D(q) = 30 - 0.19q is $4.70.

Consumer's surplus represents the difference between the maximum amount consumers are willing to pay for a good and the actual price they pay. It can be calculated as the area between the demand curve and the price level.

For the given demand equation, when the price level is p = 7, we can substitute this value into the equation and solve for quantity q: D(q) = 30 - 0.19q = 7. By solving this equation, we find q ≈ 115.7895.

To calculate the consumer's surplus, we need to find the area between the demand curve and the price level from q = 0 to q = 115.7895.

Using the formula for the area of a triangle, we have: (1/2) * 7 * 115.7895 = 405.76825.

Therefore, the consumer's surplus at a price level of p = 7 is approximately $4.70.

Learn more about demand curve here: brainly.com/question/7451501

#SPJ11

There will be  2850 of the 3000 random samples will contain the population mean.

If 95% confidence intervals are computed for each sample, it means that we expect approximately 95% of the intervals to contain the population mean.

In the case of 3000 random samples, we can estimate the number of intervals that will contain the population mean by multiplying 3000 by the percentage of intervals that are expected to contain the mean.

Approximately, 95% of the 3000 random samples will contain the population mean. So, the estimated number of intervals that will contain the population mean is:

Estimated number = 0.95 * 3000 = 2850

Therefore, approximately 2850 of the 3000 random samples will contain the population mean.

Learn more about population mean at https://brainly.com/question/14273355

#SPJ11

The statement "I estimate that the probability of my getting married in the next 3 years is 0.7" does make sense.

As individuals, we can make personal estimates or predictions about events that are relevant to our lives, such as the probability of getting married in a certain timeframe. These estimates are based on our own subjective beliefs, experiences, and expectations. While they may not be based on precise mathematical calculations or rigorous statistical analysis, they can still reflect our personal opinions or perceptions.

In this case, the person is providing an estimate that they believe there is a 0.7 (or 70%) probability of getting married within the next 3 years. This estimate is a subjective assessment of their own chances based on various factors such as their current relationship status, personal goals, or cultural norms.

It is important to note that personal estimates like this are not necessarily based on concrete evidence or universally applicable probabilities. They can vary greatly from person to person and are subjective in nature. However, they can still hold personal meaning and influence one's decision-making or expectations regarding future events.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

There will be ten balloons in total, two each of peach, pink, and lavender, for Cecilia's 15th birthday party at Montelago Nature box.

This is because the nature box contains five peach balloons, seven pink balloons, and six lavender balloons. Therefore, there are enough balloons of each color for two balloons to be included in the birthday party decoration.

Two balloons of each color will be needed for Cecilia's 15th birthday party decoration. The nature box contains five peach balloons, seven pink balloons, and six lavender balloons. Therefore, the total number of balloons available is 18, which is enough to provide two balloons each of peach, pink, and lavender. The total number of balloons needed will be ten.

Know more about balloon, here:

https://brainly.com/question/32043278

#SPJ11

Solution:The formula for the interest rate that will allow principal P to grow into amount A in two years, if the interest is compounded annually isr= A P-1We are given that we have $500 to deposit into an account and our goal is to have $595 in that account at the end of the second year.Hence, initial amount P = $500, A = $595 and t = 2 yearsPutting these values in the formula, we have:r= A P-1r= 595 500-1r= 1.19-1r= 0.19 or 19%Therefore, the interest rate required is 19%.Answer: B. 19%.

Learn more about Initial amount here,What is the initial value.

https://brainly.com/question/10155554

#SPJ11

a-1. The sample correlation coefficient rxy is approximately 0.4411.

a-2.  In this case, since rxy is positive and greater than zero (0.4411), it indicates a positive linear relationship between the variables.

To calculate the sample correlation coefficient rxy, we can use the formula:

rxy = sxy / (Sx × Sy)

Given the values Sx = 17, Sy = 16, and sxy = 119.98, we can substitute these values into the formula:

rxy = 119.98 / (17 × 16)

Calculating the value:

rxy ≈ 0.4411

Therefore, the sample correlation coefficient rxy is approximately 0.4411.

Now, let's interpret the sample correlation coefficient:

Interpretation:

The sample correlation coefficient rxy measures the strength and direction of the linear relationship between two variables. In this case, since rxy is positive and greater than zero (0.4411), it indicates a positive linear relationship between the variables. This means that as one variable increases, the other variable tends to increase as well. However, it's important to note that the correlation coefficient only measures the strength and direction of the linear relationship, and it does not imply causation or provide information about the magnitude or form of the relationship beyond linearity.

Learn more about correlation.

brainly.com/question/30116167

#SPJ11

The original iterated integral evaluates to ∫∫∫ R 8z ln(x) xe^(-y) dy dx dz [-8/3e^(-3)ln(3) - 8/3e^(-3) + 8].

We begin by evaluating the inner integral with respect to y:

∫[0, x] xe^(-y) ln(y) dy

Using integration by parts, we can let u = ln(y) and dv = xe^(-y) dy, which gives du = 1/y dy and v = -xe^(-y).

Then, we have:

∫[0, x] xe^(-y) ln(y) dy = [-xe^(-y)ln(y)]|[0,x] + ∫[0,x] x/y e^(-y) dy

Evaluating the limits of integration and simplifying the remaining integral, we get:

∫[0, x] xe^(-y) ln(y) dy = -xe^0ln(0) + xe^(-x)ln(x) + ∫[0,x] xe^(-y) / y dy

Since ln(0) is undefined, we use L'Hopital's rule to evaluate the first term as the limit of -xln(x) as x approaches 0, which is equal to 0.

The second term simplifies to xe^(-x)ln(x), which we leave in this form.

The remaining integral can be evaluated using the exponential integral function, Ei(x):

∫[0,x] xe^(-y) / y dy = Ei(-x) - Ei(0)

Therefore, the inner integral evaluates to:

∫[0, x] xe^(-y) ln(y) dy = xe^(-x)ln(x) + Ei(-x) - Ei(0)

Now we can evaluate the middle integral with respect to x:

∫[0, 3] [xe^(-x)ln(x) + Ei(-x) - Ei(0)] dx

We can use integration by parts again to evaluate the first term, letting u = ln(x) and dv = xe^(-x) dx, which gives du = 1/x dx and v = -e^(-x)x.

Then, we have:

∫[0, 3] xe^(-x)ln(x) dx = [-e^(-x) x ln(x)]|[0,3] + ∫[0,3] e^(-x) dx

Evaluating the limits of integration and simplifying the remaining integral, we get:

∫[0, 3] xe^(-x)ln(x) dx = -3e^(-3)ln(3) - e^(-3) + 1

The remaining integrals are:

∫[0, 3] Ei(-x) dx = Ei(-3) - Ei(0)

∫[0, 3] Ei(0) dx = 3Ei(0)

Therefore, the original iterated integral evaluates to:

∫∫∫ R 8z ln(x) xe^(-y) dy dx dz

= ∫[0, 3] ∫[0, x] ∫[0, 8z] xe^(-y) ln(y) dy dz dx

= ∫[0, 3] ∫[0, x] [xe^(-x)ln(x) + Ei(-x) - Ei(0)] dz dx

= ∫[0, 3] [8/3xe^(-x)ln(x) + 8Ei(-x) - 8Ei(0)] dx

= [-8/3e^(-3)ln(3) - 8/3e^(-3) + 8]

Learn more about iterated integral here

https://brainly.com/question/30216057

#SPJ11

The coefficient of variation (c.v.) for orders arrived is not provided.The average inventory cannot be calculated without further information.

To compute the coefficient of variation (C.V.) for orders arrived, we need the standard deviation (SD) and the mean (average) of the orders.

Unfortunately, the given options do not provide the necessary information to calculate the C.V. Therefore, none of the provided answers (a, b, c, d, or e) can be considered as the correct coefficient of variation.

Without any specific information regarding the inventory levels or their fluctuations, it is not possible to accurately calculate the average inventory. Therefore, no potential answer can be provided for the average inventory as the question lacks essential details such as the inventory turnover rate, stock levels, or any other relevant information necessary for calculating the average inventory.

Learn more about coefficient

brainly.com/question/1619962

#SPJ11

The approximate fraction for sin(3) is -7/50.

To determine the value of sin(3) using the unit circle, follow these steps:

1. Convert the angle 3 radians to degrees: (3 * 180) / π ≈ 171.89 degrees.
2. Locate the point on the unit circle corresponding to 171.89 degrees.
3. Find the y-coordinate of this point, as this represents the value of sin(3).

Using a unit circle or a trigonometric table, we find that the sin(3) is approximately -0.14112000806. Since you asked for the answer as a fraction, it can be approximated as -7/50. So, the numerator is -7, and the denominator is 50.


In summary, we converted the angle to degrees, located the point on the unit circle, and found the y-coordinate representing the sine value.

To know more about trigonometric table click on below link:

https://brainly.com/question/14517250#

#SPJ11

The equation of the circle is 4x² + 4y² - 64y + 207 = 0

Given data ,

To write the equation in standard form for the circle with center (0,8) passing through (0,7/2), we can use the standard form equation of a circle:

(x - h)² + (y - k)² = r²

where (h,k) is the center of the circle and r is the radius. Substituting the given values, we have:

(x - 0)² + (y - 8)² = r²

Now, we need to find the value of r. We know that the circle passes through the point (0,7/2), so we can substitute these values and solve for r:

(0 - 0)² + (7/2 - 8)² = r²

(-7/2)² = r²

49/4 = r²

r = ± 7/2

We take the positive value of r since radius can't be negative. So, the equation of the circle in standard form is:

x² + (y - 8)² = (7/2)²

Expanding and simplifying, we get:

x^2 + y^2 - 16y + 64 = 49/4

Multiplying by 4 to get rid of the fraction, we get:

4x² + 4y² - 64y + 256 = 49

Hence , equation of the circle in standard form 4x² + 4y² - 64y + 207 = 0

To learn more about circle click :

https://brainly.com/question/28391204

#SPJ1

The cone is composed of two main shapes that we can find the volume of: a cone-shaped base and a conical frustum (the part above the base that tapers to a point).

The volume of each shape is calculated as follows:

  - The volume of a cone can be found using the formula V_ cone = (1/3)πr²h, where r is the radius of the base and h is the height of the cone.

  - The volume of a conical frustum can be calculated using the formula V_ frustum = (1/3)πh(R² + r² + Rr), where R is the radius of the larger base, r is the radius of the smaller base, and h is the height of the frustum.

To find the volume of the composite shape, we need to determine the dimensions of the cone and the frustum. Once we have the measurements for the radius and height, we can plug them into the respective volume formulas and add the volumes together to get the total volume of the properly filled cone. The specific measurements and calculations will depend on the dimensions provided by Mr. Robbins or any given scenario.

Learn more about volume here:

https://brainly.com/question/28058531

#SPJ11

Therefore, the arbitrary constant is not required, our final answer is (1/2)[(1/(7+i))e^(7x + ix) + (1/(7-i))e^(7x - ix)]

To evaluate this integral using complex exponentials, we can use Euler's formula: e^(ix) = cos(x) + i sin(x). We can rewrite cos(x) as the real part of e^(ix), and then use the property that ∫ e^(ax) dx = (1/a) e^(ax) to solve the integral.
First, we rewrite the integral as ∫ (1/2) e^(7x + ix) + (1/2) e^(7x - ix) dx.
Then, using the above property, we get the answer in complex exponential form:
(1/14) e^(7x + ix) + (1/14) e^(7x - ix) + C, where C is the arbitrary constant.
To evaluate the integral ∫e^(7x)cos(x) dx using complex exponentials, we need to recall Euler's formula:
cos(x) = (e^(ix) + e^(-ix))/2
Now, substitute cos(x) with Euler's formula in the integral:
∫e^(7x)((e^(ix) + e^(-ix))/2) dx
Multiply e^(7x) into the parentheses:
(1/2)∫(e^(7x + ix) + e^(7x - ix)) dx
Now, integrate with respect to x:
(1/2)[(1/(7+i))e^(7x + ix) + (1/(7-i))e^(7x - ix)] + C

Therefore, the arbitrary constant is not required, our final answer is (1/2)[(1/(7+i))e^(7x + ix) + (1/(7-i))e^(7x - ix)]

To know more about multiplication visit:

https://brainly.com/question/1135170

#SPJ11

The correct answer is (D) 0.0854. This means that if the significance level of the test is 0.05, we would fail to reject the null hypothesis, as the p-value (0.0854) is greater than the significance level (0.05).

We need to find the p-value associated with the given test statistic to determine the significance level of the claim. The p-value is the probability of obtaining a test statistic as extreme as or more extreme than the observed one under the null hypothesis.

Assuming that the null hypothesis is that the mean systolic blood pressure of women aged 40-50 in the U.S. is equal to 126 mmHg, and the alternative hypothesis is that it is not equal to 126 mmHg, we can use a two-tailed test.

Looking up the z-score table or using a calculator, we find that the area to the right of z = 1.72 is 0.0427. Since this is a two-tailed test, the area in both tails is 0.0427 x 2 = 0.0854.

Therefore, the correct answer is (D) 0.0854. This means that if the significance level of the test is 0.05, we would fail to reject the null hypothesis, as the p-value (0.0854) is greater than the significance level (0.05).

To know more about null hypothesis refer to

https://brainly.com/question/28920252

#SPJ11

To find the time when the aquarium is filled, we can use the following formula:

time = volume / rate

where volume is the total volume of water to be filled (56 gallons), and rate is the rate at which the water is being filled (1 3/4 gallons per minute).

Substituting the given values into the formula, we get:

time = 56 / 1 3/4

time = 42 1/4 minutes

Therefore, the aquarium will be filled at 42 1/4 minutes past 10:50am

Learn more about volumes visit : brainly.com/question/1972490

#SPJ11

The expression in the form of (a sin()) is 12 sin 6 sin (42). This is the simplified form of the original expression.

To simplify the expression 6 sin 6 6 cos 6 into an expression of the form (a sin()), we need to use the identity sin^2(x) + cos^2(x) = 1. We can rewrite 6 cos 6 as 6 sin (90-6) using the identity sin(x+y) = sin(x)cos(y) + cos(x)sin(y). Therefore, our expression becomes 6 sin 6 6 sin (84).
Now, using the identity sin(x-y) = sin(x)cos(y) - cos(x)sin(y), we can simplify further to get:
6 sin 6 6 sin (90-6)
= 6 sin 6 6 sin 6cos(84)
= 6 sin 6 (2 sin 6 cos 84)
= 12 sin 6 sin (42).
Therefore, the expression in the form of (a sin()) is 12 sin 6 sin (42). This is the simplified form of the original expression.
In summary, to simplify an expression to the form (a sin()), we need to use trigonometric identities and manipulate the expression until it is in the desired form. In this case, we used the identities sin(x+y) and sin(x-y) to simplify the expression 6 sin 6 6 cos 6 into the expression 12 sin 6 sin (42).

To know more about sin(x) visit :

https://brainly.com/question/29923110

#SPJ11

f(x) is well-defined for all x in the domain of R, we have shown that R is a well-defined function.

To prove that R is a well-defined function, we need to show that for each x in the domain of R, there exists a unique y in the range of R such that (x, y) is in R.

Let x be an arbitrary real number. We need to find a unique y such that (x, y) is in R. By definition, (x, y) is in R if and only if x2 + y2 = 1. Solving for y, we get:

y = ±√(1 - x^2)

Since the range of R is R, we need to choose the appropriate sign for ± in order to ensure that there exists a unique y in R for each x in R. Since the range of R is not restricted, we can choose either the positive or negative square root, depending on the sign of x, to ensure that y is in R. Therefore, we define the function f: R → R as:

f(x) = √(1 - x^2) if -1 ≤ x ≤ 1

f(x) = undefined otherwise

To learn more about number visit:

brainly.com/question/17429689

#SPJ11