A 16. 81 gram sample of an organic compound containing C, H and O is analyzed by combustion analysis and 21. 33 grams of CO2 and 5. 822 grams of H2O are produced. In a separate experiment, the molar mass is found to be 104. 1 g/mol. Determine the empirical formula and the molecular formula of the organic compound

New ion-dipole or dipole-dipole attractions take effect if the solute is an ion or polar molecule on its own.

When things go well, they could release enough potential energy to partially offset the energy needed to integrate the solute into the structure. Ammonia dissolving in water is a striking illustration of this.  Solution's enthalpy. A solution is a uniform combination of two or more components that can exist in the solid, liquid, or gas phases. The amount of heat that is emitted or absorbed during the dissolving process is known as the enthalpy change of solution (at constant pressure).The solvent molecules begin to dissociate as a result. This process' enthalpy is referred to as. Since energy is needed to break the contact between the B molecules, this reaction, like the first, is always endothermic (). Let's try to picture what has transpired up to this point.

To learn more about polar molecule please click on below link

https://brainly.com/question/15173422

#SPJ4

The component missing from the process of photosynthesis is carbon dioxide. Carbon dioxide is an essential component of photosynthesis as it is used by plants to create glucose, which is the primary energy source for plants.

Carbon dioxide (CO2) is a colorless, odorless gas that is produced when carbon-containing compounds are burned. It is one of the most abundant trace gases that make up the Earth’s atmosphere. Carbon dioxide is important in the Earth’s natural cycle of life as plants use it to produce food through photosynthesis, while animals and humans exhale it as a waste product. In the atmosphere, carbon dioxide acts as a greenhouse gas and helps regulate the Earth’s temperature.

Carbon dioxide is taken in by the leaves of the plant and then combined with water and energy from sunlight to form glucose. Without carbon dioxide, photosynthesis would not be possible.

To learn more about Carbon dioxide
https://brainly.com/question/25385913
#SPJ4

Answer: The Correct Answer is A. Sunlight

Carbon Dioxide + Water + Sunlight → Glucose + Oxygen

Explanation: I took the test and got it right.

Have a Great Day.

The AsF6- ion has an octahedral electron-domain shape. Sp3d2 orbitals are the hybrid orbitals that the As atom utilizes for bonding.

The octahedral geometry of AsF6-. All six fluorine atoms are sp3d2 hybrid orbitals with the central arsenic atom, and they all form 90° and 180° bond angles in an octahedral geometry. Arsenic(As), with atomic number 33, is the main atom in the AsF6-. Configuration of the formula As(33)=[Ar]3d104s24p3. As a result, As' valence shell contains five electrons. It can therefore create five single bonds with a fluorine atom and one more single bond with a fluorine atom as a result of one negative charge. Consequently, there are six bond pairings in total.

To learn more about orbitals click here https://brainly.com/question/18914648

#SPJ4

Nitric acid has the formula HNO₃. If there are 3. 55x10²³ atoms of O in the sample, the number of moles of nitric acid is 0.589moles.

How many moles of a substance are present in a reaction is determined by comparing its mass to the mass of one mole. One mole, or Avogadro's number, is equal to the sample mass divided by the molar mass, or 6.023×10²³ moles. You can calculate the total number of atoms or molecules in a sample by dividing the number of moles by the Avogadro constant. The equation is: Number of Molecules=Atoms or Molecules /6.022×10²³.

1 mole oxygen atom contains 6.02×10²³ atoms

how many moles of oxygen contains 3.55x 10²³atoms

Moles of nitric acid = 3.55x 10²³atoms/6.02 ×10²³atoms

Moles of nitric acid = 0.589moles.

To know more about moles visit:

https://brainly.com/question/15894854

#SPJ4

The orbital configuration of following elements is as follows: i) helium- 1 s² ii)nitrogen- 1 s² 2 s²  2 p³ iii)silicon-1 s² 2 s² 2 p⁶ 3 s² 3 p²

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number. All atoms with same atomic number are atoms of same element.

Here,

The orbital configuration of following elements is as follows: i) helium- 1 s² ii)nitrogen- 1 s² 2 s²  2 p³ iii)silicon-1 s² 2 s² 2 p⁶ 3 s² 3 p²

Learn more about elements, here:

https://brainly.com/question/21882530

#SPJ4

The properties of the elements are repeated after 2 8 18 and 32 elements because these are the maximum number of the electrons that the four shells contains.

The electronic configuration of the elements in the periodic table are repeated because the maximum number of the electrons that the four shells can have are 2 8 18 and 32. the name of the four shells are K , L, M, N. The electronic configuration of the elements are repeated and due to this the properties of the elements are repeated.

Thus, the properties of the elements are increases because the electronic configuration are repeated in the periodic table.

To learn more about periodic table here

https://brainly.com/question/11155928

#SPJ4

Students as a chemical reaction that absorbs thermal energy for the design of cold packs for the treatment of injuries can combine manganese oxide (MnO2) with hydrogen peroxide (H2O2)

By controlling the amounts of the reactants they can control the temperature, keeping it between 0 °C and 4 °C for 20 minutes or more.

This type of chemical reaction is called endothermic, because energy is absorbed in the form of light or heat, causing the resulting products to have higher energy than the reactants.

The most widely used endothermic chemical reaction in the treatment of injuries is the melting of ice, at least in warm environments, which occurs according to the following reaction:

H2O (s) + Energy ----- H2O (l)

The effect of an endothermic reaction is absorbs heat energy and in the case of manganese oxide the following decomposition occurs:

MnO2 (s) → MnO (s) + ½ O2 (g); ∆HR = 134kJ

Students can design cold packs for treating injuries with manganese dioxide bcause it breaks down into two products, manganese oxide and oxygen, making the enthalpy greater than zero (∆HR > 0).

MnO2 is a solid between gray and black in color and is present in minerals such as pyrolusite and nsutite, when combined with hydrogen peroxide it acts as a catalyst so that it accelerates chemical reaction

Learn more about a chemical reaction that absorbs thermal energy at https://brainly.com/question/15670457

#SPJ4

Following is the list of primary secondary and tertiary alcohols.

Alcohols are chemical compounds made composed of an alkyl or aryl group and a hydroxyl group (ROH). A fundamental alcohol is a hydroxyl carbon with just one R group. If it contains two R groups, it is a secondary alcohol, and if it has three R groups, it is a tertiary alcohol.

Look at the carbon bonded to OH to identify whether an alcohol is primary, secondary, or tertiary. The alcohol is primary, secondary, or tertiary depending on how many other carbons are connected to that carbon. It is methanol if there are three hydrogens and no carbons, which is a rare combination.

For the given formulas, following are different types of alcohols -

a) Primary Alcohols

b) Tertiary Alcohol

c) Secondary Alcohol

d) Primary Alcohol

e) Primary Alcohol

f) secondary Alcohol

To learn more about primary secondary and tertiary alcohols​ from given link

https://brainly.com/question/28108673

#SPJ1

The process of turning pennies into brass simply has to do with dissolving the copper in the penny by a chemical process and this is then replaced with a brass alloy and this process could theoretically be applied to other coins.

A coin is a tiny, flat, round piece of metal or plastic which is used as legal tender or a medium of exchange. It should be noted that they are mass-produced at a mint so as to facilitate trade, and their weight is standardized.

In order achieve various mechanical, electrical, and chemical properties, it should be noted that copper and zinc can be combined in different ratios in order to create the alloy known as brass.

The composition of other coins, such as quarters, nickels, and dimes, is different from pennies and would require different chemical processes to alter. Additionally, it is illegal to deface or alter U.S. coin currency, so it would not be legal to do this process on any other coin. In this case, it can be applied to other coins.

Learn more about coin on:

https://brainly.com/question/24342899

#SPJ1

Zinc, phosphorus and oxygen are elements contained in dental cement (Zn₃(PO₄)).

Dental cements have a wide range of dental and orthodontic applications. Common uses include temporary tooth restoration, lining cavities to protect the pulp, sedation or isolation, and cementation of fixed prosthetic devices.

A cement-retained bridge is simply a dental device that is permanently fixed in the mouth to restore the mouse's function and aesthetics and to prevent many of the consequences of tooth loss that affect the immediate aftermath of losing natural teeth.

Learn more about prosthetic devices visit:

brainly.com/question/30158376

#SPJ4

The isotopic mass of the least abundant isotope will be 123.05 u.

Average atomic mass of X = 122.131 u

Assume most abundant isotope = Y and least abundant isotope = Z

Relative abundance (Y) = 61.35%

So,

Z = 100 - 61.35

Z = 38.65 %

Isotopic mass of Y= 121.552 u

Isotopic mass of Z = ?

To calculate the isotopic mass we use the following formula:

Average atomic mass = [(mass Y × percent abundance) + (mass Z × percent abundance)] / 100

put the values

122.131 = [(121.552 × 61.35) + (Z × 38.65)] / 100

12213.1 = (7457.22) + (Z × 38.65)

Z × 38.65 = 12213.1 - 7457.22

Z × 38.65 = 4755.88

Z = 4755.88 / 38.65

Z = 123.05

You can also learn about Isotopic mass from the following question:

https://brainly.com/question/23339356

#SPJ4

Benzene (C6H6) burns in air to produce carbon dioxide and liquid water.The heat released in KJ per gram of the compound reacted with oxygen is -41.83 KJ.

Heat is the result of the movement of kinetic energy within a material or an item, or from an energy source to a material or an object. Radiation, conduction, and convection are the three mechanisms through which such energy can be transferred.

The movement of minuscule atoms, molecules, or ions in solids, liquids, and gases produces heat energy. From one thing to another, heat energy can be exchanged. Heat is the flow or transfer that occurs as a result of the temperature differential between two objects.

Reaction as follows;

2C6H6 + 15O2 → 12CO2 + 6H2O

2x49.04   2x10       12x-393.5  6x-285.8

= [ 12(-393.5 )+6(-285.8) ] - [ 2(49.04)+(2x10) ]

= - 6936.8 - 98

= - 6534.8 KJ/mole

Per gram of benzene

= ( -6534.8 KJ / 2 mole of C6H6) (1 mole of C6H6 / 78.108g )

= -41.83 KJ / mole

Thus, The heat released in KJ per gram of the compound reacted with oxygen is -41.83 KJ.

To learn more about heat, follow the link;

https://brainly.com/question/1429452

#SPJ1

In biology, a system is a collection of organs (each made of multicellular tissues) that together perform a major function.

In biology, a system refers to a collection of organs that work together to perform a specific function or set of functions. Organs are structures made of multiple types of tissues that work together to perform a specific task.

These tasks can be related to maintaining homeostasis, such as the circulatory system which transports oxygen and nutrients throughout the body, or to a specific function, such as the reproductive system which is responsible for the production of offspring.

Therefore, Organs within a system are highly specialized and have specific functions, but they also work together in concert to achieve the overall function of the system. For example, the digestive system is made up of several organs including the mouth, esophagus, stomach, small intestine, and large intestine.

Learn more about multicellular tissues from

https://brainly.com/question/22336423

#SPJ1

Polar endotherms must save heat, hence they usually have a significant surface area to volume ratio. The capacity to maintain blood is what makes heat conservation unique.

Vasoconstriction keeps it in the centre by decreasing blood flow to the outside (also known as peripheral vasoconstriction). An endotherm is an organism that uses heat produced by its internal biological processes rather than nearly exclusively relying on ambient heat to keep its body at a metabolically advantageous temperature. In thermodynamics, heat is defined as a kind of energy that crosses a thermodynamic system's boundary due to a temperature differential across the barrier. Heat is not present in a thermodynamic system.

Learn more about heat here

https://brainly.com/question/28302909

#SPJ4

The answer is 0.01918 kilometers.

To convert from feet to kilometers,

you must first convert feet to meters. To do this, multiply the number of feet by 0.3048. In this case, 62.95 feet multiplied by 0.3048 equals 19.18 meters To convert from meters to kilometers, multiply the number of meters by 0.001. 19.18 meters multiplied by 0.001 equals 0.01918 kilometers. Therefore, 62.95 feet is equal to 0.01912 kilometers.

To review the conversion steps more closely, starting with feet and ending with kilometers:

1. Feet (62.95) to meters (19.18): Multiply by 0.3048

2. Meters (19.18) to kilometers (0.01918): Multiply by 0.001 or divide by 1000.

Therefore, 62.95 feet is equal to 0.01918 kilometers.

To learn between Feet and Kilometers:

brainly.com/question/1462592

#SPJ4

The given statement is false - outside city limits, the minimum distance for parking cars from a warning cross indicating a railroad crossing is 50 meters (165 feet).

Within 100 feet of a railroad crossing, bridge, tunnel, or other potentially dangerous location.

To ensure the safety of drivers on the road, the relevant authorities have made a number of rules regarding parking cars and other vehicles.

The authorities have made regulations regarding car parking close to railroad crossing signs in consideration of public safety and potential conditions relating to traffic accidents.

Because trains follow a different route and are a different mode of transportation, sometimes they must cross over the sides of the road.

The maximum length for parking a car outside the city limits has been set at 50 meters in order to prevent accidents that might happen as a result of track failure or other technical issues.

The same limit for parking a car inside the city's boundaries, however, has been set to at least 10 meters, or roughly 33 feet, due to space restrictions.

To know more about parking rules visit:

https://brainly.com/question/14393301

#SPJ4

By beta, tungsten 188 decays. The mechanism through which an insecure atomic structure is produced is known as radioactive decay.

The process through which highly unstable molecular nucleus loses its energy through radiation is described as radioactive decay, also characterized as nuclear decay, radiography, radioactivity breakdown, or nuclear disintegration. A substance that has unstable nuclei is regarded as radioactive. For a large variety of human activities, radioactive decay is crucial.

Alpha, beta, and/or gamma rays are all types of ionizing radiation that are released when radioactive atoms decay. Because the energy is powerful enough to dislodge firmly coupled electrons from just an atom's orbit, it is known as ionizing radiation. As a result, the atom develops into a charged ion.

To know more about radioactive decay visit:

https://brainly.com/question/1770619

#SPJ1

If the temperature is raised to 402 K, the pressure (in atm) of this given sample of gas will be 4.5.

Given,

Pressure P1 = 3.4 atm

Temperature T1 = 300 K

       ⇒            T2 = 402 K

   ⇒                P2 = ?

    ⇒          P1/T1 = P2/T2

 ⇒         3.4/300 = P2/402

    ⇒              P2 = 4.5

   ⇒     Pressure = 4.5 atm

An atmosphere (atm) is a measuring unit that corresponds to the average air sea level pressure at 15 degrees Celsius (59 degrees Fahrenheit). One atmosphere consists of 1,013 millibars of pressure, or 760 millimetres (29.92 inches) of mercury.

Pressure is defined as the force exerted by one material on another per unit area. The force also that gas exerts on the container limits is defined as gas pressure. Gas molecules travel at random over the specified volume. They clash with the surface as well as each other during this movement.

To know more about the Pressure, here

https://brainly.com/question/2060803

#SPJ4

Grams have been employed to estimate the mass of decomposition. Option C is correct, so.

The chemical response is as follows:

Every mole of must be broken to generate one mole of KCl.

180 kilograms of KCl was produced.

KCl produced in moles =

Produced moles of KCl equals moles.

Degradation of the same material is necessary for the creation of moles of KCl.

Therefore, the moles of the must be decomposed = moles.

Decomposition of mass equals moles of molecular weight

122.2 grammes of moles must be degraded from the mass.

Has to be decomposed for the production of 2 moles of KCl =

kilos.

Thus, kilograms has supplied the mass of decomposition. Option C is correct, however.

To know more about Chemical click here

brainly.com/question/13145357

#SPJ4

The two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances are volume and mass.

What is Volume?

Volume is a measure of the amount of three-dimensional space occupied by an object or substance. It is often measured in liters, cubic centimeters, or cubic meters. Volume is used to measure the capacity of a container, the size of an object, or the amount of liquid or gas in a given space. It is also used to determine the mass of an object, as the density (mass per unit volume) is often known.

The two quantities of volume and mass are important for doing dimensional analysis with chemical substances because they help to measure the amount of a substance in different units. Volume is important for measuring the quantity of liquid substances, and mass is important for measuring the quantity of solid substances. Both of these quantities are necessary for accurate and precise measurements of chemical substances, making them essential for dimensional analysis.

To know more about volume,

https://brainly.com/question/14197390

#SPJ4

A chemical reaction reaches equilibrium when the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in no net change in the concentrations of the reactants and products.

A scientist observing a chemical reaction can tell if the reaction has achieved equilibrium by monitoring the following: Concentration of reactants and products: The concentrations of reactants and products should no longer change over time if the reaction has reached equilibrium. Temperature: If the reaction has reached equilibrium, the temperature of the system should remain constant. Pressure: If the reaction is taking place in a closed container, the pressure of the system should also remain constant if the reaction has reached equilibrium. It's worth noting that the equilibrium is a dynamic process, meaning that the concentrations of reactants and products will remain constant over time, but the chemical reaction is still taking place.

Learn more about chemical reaction here:

https://brainly.com/question/29762834

#SPJ4

According to the data collected during the experimental reaction in the laboratory, and the balanced equation of the reaction, 5 moles of iron (Fe) and 2.5 moles of aluminum oxide (Fe2O3) were produced.

Fe2O3 + 2Al → 2Fe + Al2O3

If 1 mole of Fe2O3 is combined with 2 moles of Al

So 3 moles of Fe2O3 combine with x moles of Al

X moles of Al = 3 moles Fe2O3 x 2 moles Al / 1 mole Fe2O3 = 6 moles

Limiting reagent: Al, because there are only 5 moles available

If 2 moles of Al produce 2 moles of Fe

So 5 moles of Al produce x moles of Fe

X moles of Fe = 5 moles of Al x 2 moles of Fe / 2 moles of Al = 5 moles

If 2 moles of Al produce 1 mole of Fe2O3

So 5 moles of Al produce x moles of Fe2O3

X moles of Fe = 5 moles of Al x 1 mole of Fe2O3 / 2 moles of Al = 2.5 moles

By establishing the balanced equation of the reaction and the stoichiometric relationships, the amount of limit reagent is first determined and with this data, the moles of products are later determined.

Learn more about data was collected when a reaction was performed experimentally in the laboratory at https://brainly.com/question/29100434

#SPJ4

The mass in grams of a sample of Bi with 7.35 1023 atoms should be 255 grams.

A substance's mass is measured in grams per mole, or molar mass. The molar mass of a substance can be determined, as demonstrated in this video, by adding the molar masses of the substance's constituent atoms. The substance's molar mass can then be used to determine the number of moles in the substance and converted to mass.

The molar mass of Bi is 208.98 g/mol.

1 mole Bi = 208.98 g/mol = 6.023×10²³ no of atoms

So, the mass in grams should be

mass = ( 208.98 g/mol ×7.35 × 10²³) ÷ (6.023×10²³)

mass = 255 grams.

To know more about molar mass visit:

https://brainly.com/question/18481666

#SPJ4

Thus, Option (C) Glucose has a maximum of 72 C-atoms per gram. The components of fossil fuels are decaying plants and animals.

These fuels may be burned to provide energy and can be found in the crust of the Earth. An example of a fossil fuel is coal, as well as oil and natural gas. Due to the hydrocarbons and other carbon-based compounds they contain, fossil fuels are valuable as energy sources. Any of a class of organic molecules made solely of carbon and hydrogen are known as hydrocarbons. The hydrogen atoms adhere to the carbon atoms, which serve as the "skeleton" or framework. Because they were generated from the petrified, buried remains of plants and animals that once lived millions of years ago, coal, crude oil, and natural gas are all referred to as fossil fuels.

The complete question is- Petroleum is a fossil fuel containing many different carbon compounds. If the carbon atoms in petroleum have been in the ground for 875 million years, what fraction of the initial 14C atoms is still there?

Learn more about carbon here-

https://brainly.com/question/22530423

#SPJ4

The plausible electron dot structures of I₂, OF₂, H₂S, NI₃ substances are attached below.

Lewis dot structures, also known as electron dot structures, are diagrams that show how atoms in a molecule are chemically bonded to one another. They also show how many lone pairs there are in total among all the atoms that make up the molecule.

An electron configuration writing guide. The shell number (n) comes first in the symbols used to represent the electron configuration, followed by the type of orbital and, finally, a superscript that represents the number of electrons in the orbital. Examples include As you can see from the periodic table, oxygen has 8 electrons.

To know more about covalent bonds visit:

https://brainly.com/question/10777799

#SPJ4

The amount of radioactive substance has decreased from 467.8 ng to 58.48 ng after 47 days, so 2.5 half-lives have occurred.

A radioactive isotope's half-life is the amount of time it takes for one half of the radioactive isotope to decay. A specific radioactive isotope's half-life is constant; it is unaffected by conditions and is independent of the initial amount of that isotope.

Half-life = 47/2.5 = 18.8 days

Decrease in Radioactive Substance = 467.8 - 58.48 = 409.32

Half-life amount = 409.32/2.5 = 163.728

Number of half-lives = 409.32/163.728 = 2.5

For more questions like Half-life click the link below:

https://brainly.com/question/16387602

#SPJ4

The line between points X and Y represents the difference in boiling points of components A and B. A boiling liquid with a composition of 40% A and 60% B will produce a vapor with a composition of 10% A and 90% B, and have a boiling point of 100°C.

The significance of the horizontal line between points X and Y on the phase diagram is that it represents the difference in boiling points of components A and B. This line indicates the point at which the vapor and liquid phases are in equilibrium. On the diagram, point X gives the vapor composition of the less volatile component, while point Y gives the vapor composition of the more volatile component.

By looking at the phase diagram, we can determine the molar composition of the vapor in equilibrium with a boiling liquid that has a composition of 40% A and 60% B. The vapor composition of the less volatile component (X) is 10%, while the vapor composition of the more volatile component (Y) is 90%. The boiling point of this liquid is 100°C.

learn more about boiling point here

https://brainly.com/question/2153588

#SPJ4

According to the stoichiometry of the given chemical equation 102.03 g of Al₂O₃ is formed from 54 g of aluminium.

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample. As per stoichiometry of the given chemical equation, 107.92 g aluminium gives 203.92 g Al₂O₃, thus 54 g aluminium will give 54×203.92/107.92=102.03 g.

Thus,  102.03 g of Al₂O₃ is formed from 54 g of aluminium.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ1

The correct representation about resonance structures is that The structure of the species cannot be correctly predicted by a single resonance structure and the only way resonance structures vary is in the way the electrons are arranged.

In valence bond theory, resonance is defined as a hybrid structure formed by combining a variety of contributing structure into a resonance hybrid. Because orbitals overlap, resonance happens. Pi bonds, created when two 2p orbitals overlap, are the building blocks of double bonds. These pi orbitals' electrons are delocalized since they will be dispersed across more than two atoms.

Learn more about Resonance

brainly.com/question/29547999

#SPJ4

Two solitary sigma bonds are visible in the Lewis structure between the hydrogen and oxygen atoms.

The octet rule is a theory that describes how atoms share electrons so that each atom has eight electrons in its outer shell. This idea is the foundation of a Lewis structure. An oxygen atom, as an illustration, has six electrons in its outer shell.

The entire molecule's electron density is concentrated only around the core C in the CCl4 Lewis structure. Two nitrogen atoms are connected by a triple bond in the N2 Lewis structure.

In the reaction described above, PH3 is acting as a Lewis base because of the single electron on the P atom.

A double bond exists between two oxygen atoms in the Lewis structure of O2. Oxygen atoms must form two bonds in order to comply with the octet rule. The oxygen (red) and hydrogen (white) atoms are held together by powerful connections known as covalent bonds.

To learn more about Lewis structure refer to:

https://brainly.com/question/20300458

#SPJ1