A 63.0-kg sprinter starts a race with an acceleration of 3.20 m/s2. If the sprinter from the previous problem accelerates at that rate for 20.0 m, and then maintains that velocity for the remainder of the 100.0-m dash, what will be his time for the race

The possible potential difference between the truck's top and bottom side panels is 1.39 x 10^-4 V.

The potential difference between two points in an electric circuit is given by the product of the magnetic field, the cross-sectional area of the conductor, and the component of velocity perpendicular to the magnetic field.

The potential difference between the top and bottom of the truck's side panels can be calculated using the following formula:

V = Blv

Where:

V = potential difference (V)

B = magnetic field (T)

l = length of conductor (m)

v = velocity of conductor perpendicular to the magnetic field (m/s)

Given that the magnetic field is B = (5.0 x 10^-5 T, north) and the truck is moving west at 50 km/hr = 13.89 m/s, the potential difference between the top and bottom of the truck's side panels can be calculated as:

V = Blv = (5.0 x 10^-5 T) * (2.0 m) * (13.89 m/s) = 1.39 x 10^-4 V

It is important to note that the magnetic field is pointing north and the truck is moving west, so the velocity of the truck is perpendicular to the magnetic field, which means that the potential difference is not zero. Also, it is important to note that the velocity of the truck is given in km/hr and needs to be converted to m/s before using it in the equation.

To know more about potential difference please refer: https://brainly.com/question/12198573

#SPJ4

53.24 km/hr is the journey's average speed.

Average speed is determined by dividing the entire distance covered by the body in a given amount of time, or Average Speed=Total time.

total radius. A scalar quantity, that is. M/s is its unit.

The length of the entire path traveled divided by the duration of the motion is the definition of average speed.

Total miles traveled: 31.9 + 25.7 + 23.33 = 80.5 km

Average trip speed would be 80.5/1.512=53.24 km.

Total time required to travel this distance is 0.58 hours, 0.266 hours, and 0.666 hours.

To now more about average speed visit:-

https://brainly.com/question/12322912

#SPJ4

Conclusion part of the scientific method tells us the real answer to the problem.

Analysis and Conclusion ,In this step, the experiment's outcomes are determined using appropriate mathematical and other scientific techniques. The study can be used to determine the best course of action moving forward. The hypothesis is accepted if the evidence from the analysis support it.

The scientific method is a procedure used by scientists to explore, confirm, or create a precise and trustworthy model of any natural phenomenon. They are carried out by developing an objective framework for scientific inquiry, analyzing the findings objectively, and drawing a conclusion that either confirms or disproves the initial observation.

To know more about scientific method

https://brainly.com/question/7980104

#SPJ4

The largest force that an energy source containing 100 joules can exert continuously over a distance of 25 meters is 25 Newtons (N).

This means that the energy source can exert a force of 25 N for every 100 joules of energy it contains.

The equation for calculating force is Force = Work/Distance (F = W/D).

So, in this case, Force = 100 Joules/25 Meters = 25 Newtons.

Force is a push or pull exerted on an object. It is measured in units of Newtons (N) and is calculated by dividing the amount of work done by the distance over which the work is done. Force can be used to cause an object to accelerate, change its direction, or change its shape.

Learn more about Force:

https://brainly.com/question/12970081

#SPJ4

The kinetic energy will the ball acquire from the bat is 1.0x10^1 joules or 100 joules. This calculation is based on the equation Energy = Force x Distance, which is a fundamental equation of physics.

The kinetic energy of the ball is equal to the work done by the bat on the ball. The work done by the bat on the ball is equal to the force applied by the bat multiplied by the distance the bat stays in contact with the ball. Therefore, the kinetic energy of the ball would be equal to 2.0x10^4 newtons multiplied by 5.0x10^-3 meters, which is equal to 1.0x10^1 joules or 100 joules.

This calculation is based on the equation of  Energy which is  Force x Distance. Additionally, this equation can be rearranged to solve for any of the variables, depending on what is known and what needs to be calculated. In this case, the known variables were the force applied by the bat and the distance the bat stayed in contact with the ball, and the variable that needed to be calculated as the kinetic energy of the ball.

To know more about kinetic energy refer to the link  brainly.com/question/26472013

#SPJ4

Displacement is a vector quantity thus, having different directional component. The component of the given displacement to the north is 98.99 m.

The displacement is the measure of how long and in which direction an object is moved from the starting position. Displacement is a vector quantity thus, characterized by a magnitude and direction.

In physics, displacement is the product of velocity and time. The vertical component of the displacement = d sin θ

horizontal component = d cos θ.

The component to the north for a displacement of 140m with the angle of 45° is = 140 × sin 45 = 98.99 m.

Therefore, the north component of the displacement is about 99 m.

Find more on displacement:

https://brainly.com/question/29307794

#SPJ1

From the given data, the speed of the tsunami is 789.8 km/h.

The speed of the tsunami is calculated from the relationship between distance travelled by the wave and the time of motion of the wave.

Mathematically, this formula is given as;

v = d / t

where;

From the given data, the speed of the tsunami is calculated as follows;

v = ( 3607 km ) / ( 4.567 hr )

v = 789.8 km/h

Learn more about speed here: https://brainly.com/question/13943409

#SPJ1

The ideal mechanical advantage is 5.

Here, we have value larger radius , R = 20 cm and smaller radius = 4 cm

So, as per the problem, mechanical advantage will be 20/4 = 5.

A wheel and axle must be permanently joined in order to be considered a simple machine, and the wheel must by definition have a bigger radius than the axle. A point on the wheel moves a distance of 2 R whereas a point on the axle moves a distance of 2 r when you turn the wheel through a full revolution, which likewise causes the axle to turn through a full revolution.

The force you apply F R times the distance the point moves equals the effort W required to move a point on the wheel through one full revolution. Work is energy, and since energy must be conserved, a point on the axle must be subjected to a larger force F r because it moves a shorter distance.

The mathematical relationship is:

W = Fr (subscript) ×2πr/θ =F r(subscript) ×2πR/θ

Where ​θ​ is the angle that the wheel is turned.

And therefore:

Fr(r in subscript) / FR(R in subscript) = R/r

Learn more about mechanical advantage here :

brainly.com/question/16617083

#SPJ4

the amplitude of the resultant is the amplitude of the two original waves times 1.85.

The waves add together as a result, and the amplitude at any place is equal to the sum of the amplitudes of the individual waves at that point.

The frequency of the wave produced by the superposition of two waves with comparable frequencies is equal to the average of the two. This wave's amplitude changes or beats at a frequency known as the beat frequency. By mathematically combining two waves, we can find the beat frequency.

To know more about the resultant wave visit:

brainly.com/question/3893031

#SPJ4

the linear charge density of the infinite line of charge is 5 x 10^-6 C/m.

The linear charge density (λ) of an infinite line of charge is a measure of the charge per unit length. It is given by the equation:

λ = E / k. Where E is the electric field strength at a given point and k is the Coulomb's constant (9 x 10^9 N m²/C²). We know that the electric field strength at a distance of 2.0 m from the line of charge is 4.5 x 10^4 N/C. So we can substitute these values into the equation above to find the linear charge density:λ = (4.5 x 10^4 N/C) / (9 x 10^9 N m²/C²) λ = 5 x 10^-6 C/m Therefore, the linear charge density of the infinite line of charge is 5 x 10^-6 C/m. This means that there is 5 x 10^-6 Coulombs of charge per meter of length on the line of charge.

Learn more about linear charge density here:

https://brainly.com/question/12968377

#SPJ4

Answer:

0 ms-1

Explanation:

This is a trick question.

* Don't be confused with average speed with average velocity

Since the runner ends in the same spot as she started,

the total displacement covered by the runner is zero.

Since  average velocity = total displacement/total time,

As total displacement is zero ,

average velocity = 0 / 50  ms-1

                            = 0 ms-1

A full stop means that there is a complete cessation of the forward movement of the vehicle, or stop with no forward motion.

If two or more automobiles arrive at a four-way stop at the same time, the car to the right shall proceed first. "If two or more automobiles arrive at a four-way stop at the same moment, the car on the right shall proceed first."

Your headlights will allow you to see roughly 400 feet ahead of you. You should travel at a speed that permits you to stop within this distance, which is around 50 miles per hour.

Learn more about to forward motion

https://brainly.com/question/14375816

#SPJ4

This ride increases this person's gravity potential energy by 9000 Joules.

The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of their distance, according to Newton's universal law of gravitation.

The definition of energy is "the ability to do work, which is the capability to apply a force causing the displacement of an object." Despite this vague description, energy simply refers to the power that propels motion.

Weight of the person, W = 6 x 102 N = 600 N

Avg. Speed of elevator, v = 3 m/s

Time of ride, t = 5 sec.

Therefore,

Mass of the person, m = W/g = 600/9.8 = 61.2244 kg

Height of the elevator after 5 sec, h = v x t = 3 x 5 = 15 m

Potential energy increase , PE = mgh = 61.2244 x 9.8 x 15

                                              PE = 9000 Joule

Therefore, 9000 Joule does this person's gravitational potential energy increase as a result of this ride.

To know more about gravitational force visit:

https://brainly.com/question/29276623

#SPJ4

The correct answer is D) Before the mechanic left, the molecules were moving in place. When she returned, they were moving around each other. The change in phase from solid to liquid is due to a change in the motion of molecules.

Molecules are formed when two or more atoms come together and form a chemical bond. Molecules exist in all forms of matter and are the building blocks of all living organisms. Molecules can range in size from the very small, such as hydrogen, to the very large, such as proteins. Generally, molecules are composed of two or more atoms of the same element or different elements that are held together by chemical bonds. Molecules can also be composed of multiple subatomic particles, such as protons and neutrons, which form the nucleus of an atom. Molecules may also contain electrons, which are held in orbit around the nucleus by electrostatic forces. Molecules can have different shapes depending on the arrangement of their constituent atoms. Molecules are essential to all forms of life, as they are responsible for many of the physical and chemical processes that take place in living organisms.

To learn more about molecules
https://brainly.com/question/23080116
#SPJ1

The new velocity of the object after the event is 7.99m/s.

We are given that,

Mass = m = 50kg

Initial velocity = v = 11.2m/s

Energy = E = 1539j

The kinetic energy of object can be calculated as,

K= (1/2)mv²

K = (50×125.44)/2

K = 3136J

Consequently, since both the initial kinetic energy and the total amount of energy transferred are known. The article's resulting energy is easily discernible.

Final energy = initial kinetic energy - the ending energy

Final energy  = 3136-1539= 1597 joules

Therefore, using the equation for kinetic energy derivation, the speed of the object can now be determined.

K.E = 1/2MV²

1597 = 50/2V²

3194 = 50V²

V = 7.99m/s

Therefore , the new velocity of the object after the event would be 7.99m/s.

To know more about velocity

https://brainly.com/question/24926862

#SPJ4

The spring with the higher spring constant (15.0 N/cm) will be more difficult to stretch than the spring with the lower spring constant (10.0 N/cm).

This is because the spring constant is directly related to the amount of force required to stretch the spring. Therefore, the higher the spring constant, the more force that is required to stretch the spring.

The spring constant is a measure of how difficult it is to stretch or compress a spring. It is determined by the stiffness of the spring material, its shape and size, and how much the spring is compressed or stretched.

The higher the spring constant, the more force is required to stretch or compress the spring. The lower the spring constant, the less force is required to stretch or compress the spring.

Learn more about the spring:

https://brainly.com/question/1968517

#SPJ4

The hand over hand technique lets you turn the steering wheel as much as a half turn while still keeping both hands on the wheel.

Turn the vehicle by lowering the steering wheel in the desired direction (for left turns, pull with your left hand, and vice versa). Relax your other hand and lower the driving wheel. Bring it down to meet your "pulling" hand above your but-tocks, along the wheel. When they come together, let go of the "pulling" hand and let the other to take con-trol.

It is not a good idea to turn off the ignition while the vehicle is in mo-tion, therefore Even though the car has a steering wheel lock, it is not a good idea to switch it off while it is going since it can cause the car to lose con-trol, which can cause problems and accidents.

To know more about steering wheel

https://brainly.com/question/4209682

#SPJ4

The amount of matter a body's mass is the volume of matter abody's mass. Weight is the gravitational force that pulls on the body.

The relationship between mass and weight: Mass is a measure of inertia, whereas weight is a measure of force.

Both of these names are frequently used in the same sentence. In order to determine how much matter a body is made up of, its mass is used as mode of measurement.

The acceleration which is caused by gravity on any mass is measured in terms of weight.

Mass is a measure of the quantity of matter in a material, whereas weight measures how the force of gravity acts upon a mass.

In order to determine how much matter a body contains, its mass is used.

To learn more about mass and weight refer to:

brainly.com/question/1966951

#SPJ4

In this spring-mass system, the total energy equals the elastic potential energy at the moment the mass is temporarily at rest at x = A = 6 cm (i.e., at the extreme ends of the simple harmonic motion).

Thus, E kA2 2 and we see that as long as the spring constant k and the amplitude A remain unchanged,

the total energy is unchanged. Hence, the energy is still 12 J.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ4

If a circular motion is accelerated, it will undoubtedly have a high Turning at a rapid rate.

When an object travels along a circular path at a constant speed, it is said to be in uniform circular motion (UCM).So because object's direction was constantly shifting, the velocity doesn't really remain constant along with the speed.To maintain a circular course, the object must speed up toward the the circle's center.

As the particle moves in a circle, its direction of acceleration is continuously changing since it is continually moving toward the center.As a result, it is variable.

To know more about large acceleration visit:

https://brainly.com/question/773522

#SPJ4

Deoxyribonucleic acid is a polymer composed of two polynucleotide chains that coil around each other to form a double helix.

A nonsense mutation occurs in the DNA when a sequence changes itself and gives rise to a stop codon rather than a codon specifying an amino acid. The presence of the new stop codon results in the production of a shortened protein that is non-functional.

A nonsense mutation is also known as base substitution which results in a stop codon in such a position from where there was not one before, which causes the premature termination of protein synthesis and, more than likely, a complete loss of function in the finished protein.

So we can conclude that a nonsense mutation always causes a loss of amino acids.

Learn more about DNA here: brainly.com/question/16099437

#SPJ1

These graphs do not consistent with one another because one is graph of potential energy U(x)  vs distance(x)  and two is graph of force (F(x)) vs distance(x).

Potential energy in physics is the energy that an item retains as a result of its position in relation to other objects, internal tensions, electric charge, or other elements.

Now, if a force F(x) is applied on an object, that caused a displacement of the object a distance x. Then potential energy of the object is:

U(x) = ∫ F(x)dx.

Hence, U(x) ≠ F(x)

That's why, these graphs  do not consistent with one another.

Learn more about potential energy here:

https://brainly.com/question/24284560

#SPJ1

Answer:

C. A turtle relies indirectly on the Sun as an energy source.

Explanation:

Turtles are animals, meaning they are unable to perform photosynthesis, thus option A is inapplicable. Turtles consume food such as algae and seagrass. These aquatic plants gain their energy directly from the Sun through photosynthesis, and as a result when the turtle consumes these plants, that energy from the Sun is indirectly feeding the turtle.

A wave crest is the tallest point in the wave with the greatest displacement value. The junction of the 3-meter and 2-meter waves produces a 1 metre amplitude.

What exactly is amplitude ?

The amplitude of a wave is the measurement of the wave from its still position to its crest or trough. It is measured in metres.

When the wave is crossed, the elevation is 3 metres and the depression is 2 metres, resulting in an amplitude that causes destructive interference. Because 3 m is above the baseline and 2 m is below it, the resultant amplitude is 3 - 2 = 1 m.

As a consequence, the resultant amplitude is one metre.

To learn more about amplitude follow the given link: brainly.com/question/13814350

#SPJ4

The wavelength of the electromagnetic radiation needed to remove an electron from the valence shell of an atom of the element is 2.7522m.

The electromagnetic (EM) field's waves, which travel across space carrying momentum and electromagnetic radiant energy, make up electromagnetic radiation (EMR). It consists of X-rays, gamma rays, microwaves, infrared, visible light, ultraviolet, and radio waves. These waves are all components of the electromagnetic spectrum.

We are given that,

Speed of light = c = 299 792 458 m

The frequency of  electron = f = 1.09 × 10⁸ s⁻¹

The following equation can be used to determine the wavelength of a radio wave

Wavelength = λ = c/f

λ = c/f

λ =  299 792 458 m/s/ 1.09 × 10⁸ s⁻¹

λ = 2.7522m

Therefore the wavelength of the electromagnetic radiation would be 2.7522m.

To know more about wavelength

https://brainly.com/question/1263539

#SPJ4

The velocity at Point P is 1.72 x 10^(6) m/s.

Mass of proton is Mp = 1.67x10^(-27)

Initial velocity Vo = 2.1x10^6 m/ s

As the proton is moving its Total energy should remain constant throughout the motion to point P.

Conserving the energy,  

Initial energy = Final energy

(1\2)MpVo^2 + (kQ1Q2)/R1 = (1/2)MpV^2 +(kQ1Q2)/R2  

Given R1 = 3.0 mm  

R2 = 4.0 mm  

2kQ1Q2( 1/R1 - 1/ R2) = Mp( V^2 - Vo^2)

2x9x10^9x(-10x10^(-9))x1.6x10^(-19) x {(1000/3)-(1000/4)} = 1.67x10^(-27){ V^2 - Vo^2}  

-2.4x10^(-15) = 1.67x10^(-27){V^2- Vo^2}  

-1.44x10^12 + Vo^2 = V^2  

-1.44x10^12 + (2.1x10^6)^2. = V^2  

2.97x10^(12) = V^2

V = 1.72x10(^6) m/s  

Hence velocity at Point P is 1.72 x 10^(6) m/s.

Proton's speed is dependent on a variety of factors, such as its energy and environment. When protons are released from an accelerator, their speed can be as high as nearly the speed of light, or roughly 300 million meters per second. When protons are found in an environment such as space or the Earth’s atmosphere, their speed is much lower.

In space, protons typically move at around 100 km/s or 0.1% of the speed of light. Within Earth’s atmosphere, protons tend to move much slower, usually around 10 km/s. In the upper atmosphere, protons may be accelerated by solar wind or cosmic rays to speeds of up to 400 km/s. Protons may also be slowed down by collisions with other particles, such as electrons or atoms. In general, the speed of a proton is determined by its energy and the environment it is in.

To learn more about Proton's speed visit here:

brainly.com/question/28216423

#SPJ4

Complete Question:

A proton follows the path shown in (Figure 1). Its initial speed is

[tex]V_0[/tex] = 2.1x10^6 m/s.

Part A What is the proton's speed as it passes through point P? Express your answer to two significant figures and include the appropriate units.

[tex]V_P[/tex][tex]= ?[/tex]

The continuous acceleration needed to raise a car's speed from 23 mph to 53 mph in four seconds is

The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate. Acceleration is the rate at which speed and direction of velocity vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates.

starting speed is 23 m/h, or 0.0063 m/s.

ultimate speed is 53 m/h, or 0.0147 m/s.

(Final velocity - Initial velocity) / Time = acceleration

= (0.0147 - 0.0063) / 4

= 0.0021m/[tex]s^{2}[/tex]

The acceleration required to increase the speed of a car is 0.0021m/[tex]s^{2}[/tex]

To know more about acceleration on

https://brainly.com/question/28175950

When using a 20 ft ladder the distance from a building should be the base of the ladder by 5 ft

The base of a ladder should be positioned one-quarter of the working length of the ladder from the building. Therefore, when using a 20 ft ladder, the base should be positioned 5 ft from the building. Additionally, the ladder should be placed on a solid and level surface, and the feet of the ladder should be securely wedged to prevent slipping.

Extend the top of the ladder three feet above the work table to get access to it, or fasten the ladder at the top.

Learn more about Ladder Safety Self-Study Unit here: https://brainly.com/question/13835992

#SPJ4

The gravitational force on the car is 23000 N, the vertical normal (support/reaction) force acting on the car is 0 N, and the horizontal force on the car's tyres from the road is 5460 N.

Mass of the car, m = 2300 kg

Force acting on the car, F = 5000 N

The initial speed of the car, u = 10 m/s

The final speed of the car, v = 14 m/s

Time, t = 20 s

The gravitational force on the car is calculated by the formula given as

F = mg

F = 2300 × 10

F = 23000 N

Now, as there is no vertical movement in the car therefore the vertical force acting on the car is 0 N.

The horizontal force on the car's tyres from the road

= force acting on the car + net force on the car

= 5000 + ma

= 5000 + 2300 × (v-u)/t

= 5000 + 2300 × (14 - 10)/20

= 5000 + 2300 × 4/20

= 5000 + 460

= 5460 N

To know more about gravitational force, here

https://brainly.com/question/24783651

#SPJ4

The energy of the molecules in the ground increases in the given case when the temperature increases.

Convection and conduction are two ways that the Earth's heat is released.

Conduction takes place when the transferring of heat takes place from something hot to something cold.

On the other hand, convection takes place when the transferring of heat takes place by the movement of hot gases or liquids like water, air, or magma to a cooler region.  

Near the surface of the ground, the convection of heat water results in the hot springs and geysers to shoot up into the air through a hole in the ground.

To know more about temperature:

https://brainly.com/question/18271013

#SPJ4