A catering company loses $110 as a result of a delay.
The 5 owners of the company must share the loss equally.
Which integer represents the change in profit for each owner?
A. –$22.00
B. –$0.50
C. $0.20
D. $5.00

Answers

Answer 1

The change in profit for each owner is -$22.00c

What is change in profit?

You should be aware that change in profit in this regard talks about how much money each partner is going to loose over what he or she gains initially

The given parameters that will help us to understand the question are

Total amount of loss is $110Number of partners is 5Sharing ratio is equal

This implies that the 100 dollars will be shared among the five partners in this way

110/5 = 22.00

In conclusion each partner gets a change in profit of $22.00

Learn more about change in profit on https://brainly.com/question/30060893

#SPJ1


Related Questions

Find a formula for the exponential function passing through the points ( -3, 3 /25) and (1,15) f(X) = _______-

Answers

The formula for the exponential function passing through the points (-3, 3/25) and (1, 15) is:
f(x) = 15 * 5^x

To find a formula for the exponential function passing through the points (-3, 3/25) and (1, 15), we can start by using the general form of an exponential function, which is f(x) = ab^x, where a is the initial value and b is the growth factor. Using the two given points, we can form two equations:

3/25 = ab^(-3)
15 = ab

We can solve for a and b by first dividing the second equation by the first equation:

15 / (3/25) = ab / (ab^(-3))

Simplifying, we get:

125 = b^3

Taking the cube root of both sides, we get:

b = 5

Substituting this value into one of the original equations, we can solve for a:

3/25 = a(5)^(-3)
a = 3/25 * 125 = 15

To learn more about : exponential function

https://brainly.com/question/2456547

#SPJ11

EASY WORK !!!!!



Directions: Estimate the sum or difference of each problem. The first one is done for you.

Tip: Round the numbers to the nearest 10 before estimating the sum or difference.

1) 28 + 53=

First, look at the second digit in the number. If it is 5 or higher, round the first digit up. If it is 4 or lower, leave the first digit as it is.

28 = 30

53 = 50

30 + 50 = 80

2) 58 + 31=

3) 73 + 45=

4) 37 + 44=

5) 66 - 21=

6) 53 - 50=

7) 51 - 16=

8) 20 - 11=

9) 86 + 6=

10) 94 + 87=

Answers

Answer:

1) 80

2) 90

3) 120

4) 80

5) 50

6) 5

7) 35

8) 10

9) 90

10) 180

Step-by-step explanation:

:o

Answer:

1) 80

2) 90

3) 120

4) 80

5) 50

6) 5

7) 35

8) 10

9) 90

10) 180

Step-by-step explanation:

Consider the power series: ∑
[infinity]
n
=
1
(

1
)
n
x
n
5
n
(
n
2
+
10
)
.
A) Find the interval of convergence.
B) Find the radius of convergence.

Answers

Answer:B

Step-by-step explanation: had the question before

The random variables X and Y have a joint density function given by f(x, y) = ( 2e(−2x) /x, 0 ≤ x < [infinity], 0 ≤ y ≤ x , otherwise.(a) Compute Cov(X, Y ).(b) Find E(Y | X).(c) Compute Cov(X,E(Y | X)) and show that it is the same as Cov(X, Y ).

Answers

The joint density function of the random variables X and Y is given by f(x, y) = (2e^(-2x))/x for 0 ≤ x < ∞ and 0 ≤ y ≤ x, and 0 otherwise. (a) The covariance of X and Y can be computed using the definition of covariance.

(a) The covariance of X and Y, Cov(X, Y), can be computed using the formula Cov(X, Y) = E(XY) - E(X)E(Y). We need to calculate the expectations E(XY), E(X), and E(Y) to find the covariance.

(b) To find E(Y|X), we need to calculate the conditional expectation of Y given X. This can be done by integrating Y multiplied by the conditional probability density function f(y|x) with respect to y, where f(y|x) is obtained by dividing f(x, y) by the marginal density function of X, fX(x).

(c) To compute Cov(X, E(Y|X)), we first find E(Y|X) using the method described in (b). Then we calculate the covariance between X and E(Y|X) using the definition of covariance. It can be shown that Cov(X, E(Y|X)) is the same as Cov(X, Y).

Therefore, by following the steps outlined above, we can compute the covariance of X and Y, find the conditional expectation E(Y|X), and verify that the covariance of X and E(Y|X) is the same as the covariance of X and Y

Learn more about covariance here:

https://brainly.com/question/28135424

#SPJ11

Residents were surveyed in order to determine which flowers to plant in the new Public Garden. A total of N people participated in the survey. Exactly 9/14 of those surveyed said that the colour of the flower was important. Exactly 7/12 of those surveyed said that the smell of the flower was important. In total, 753 people said that both the colour and smell were important. How many possible values are there for N? Please explain clearly.

Answers

There are 2 possible values for N.

To find the number of possible values for N, we must first find the common fraction representing people who value both color and smell. To do this, we need to find the LCM (Least Common Multiple) of the denominators 14 and 12. The LCM of 14 and 12 is 84.

Let x be the number of people who value both color and smell. Then, (9/14)N + (7/12)N - x = 753, which simplifies to (27/84)N + (14/84)N - x = 753. Combining the fractions gives (41/84)N - x = 753.

Now, we know that x is an integer, and (41/84)N must be an integer as well. Therefore, N must be a multiple of 84. Since 41 is a prime number, the only multiples of 84 that can satisfy this condition are 84 and 168, making 2 possible values for N.

To know more about Least Common Multiple click on below link:

https://brainly.com/question/26487478#

#SPJ11

A restaurant has a jar with 1 green, 4 red, 7 purple, and 3 blue marbles. Each customer randomly chooses a marble. If they choose the green marbles, they win a free appetizer. What is the probability a customer does NOT win an appetizer? Select all that apply

Answers

The probability that a customer does not win an appetizer is given as follows:

p = 0.8 = 80%.

How to calculate a probability?

A probability is calculated as the division of the desired number of outcomes by the total number of outcomes in the context of a problem/experiment.

The total number of marbles is given as follows:

1 + 4 + 7 + 3 = 15 marbles.

An appetizer is won with a green marble, and 3 of the marbles are green, while 12 are not, hence the probability that a customer does not win an appetizer is given as follows:

p = 12/15

p = 0.8 = 80%.

More can be learned about probability at https://brainly.com/question/24756209

#SPJ1

prove that hilbert's euclidean parallel postulate implies the converse to the alternate interior angle theorem

Answers

Hilbert's euclidean parallel postulate implies the converse to the alternate interior angle theorem since if α = β, then l and m cannot be parallel.

Hilbert's Euclidean parallel postulate states that given a line and a point not on that line, there exists exactly one line passing through the point and parallel to given line.

Suppose we have two parallel lines l and m, and a third line n that intersects both l and m, forming alternate interior angles α and β. We want to prove that if α = β, then l and m are not parallel.

Let's assume contrary, that l and m are parallel despite α = β. Then, by Hilbert's parallel postulate, there exists exactly one line passing through any point on n that is parallel to l and m.

Therefore, if we draw a line parallel to l and m through point where n intersects l, it must be same as line passing through point where n intersects m.

But this leads to a contradiction, because if lines are same, then alternate interior angles α and β are congruent.

Thus, we have shown that if α = β, then l and m cannot be parallel. This is  converse to alternate interior angle theorem.

Therefore, we have proved that Hilbert's Euclidean parallel postulate implies converse to the alternate interior angle theorem.

Know more about Hilbert's euclidean here:

https://brainly.com/question/31423481

#SPJ11

ΔABC is similar to ΔDEF. m∠BAC = (x² - 5x)º, m∠BCA = (4x - 5)º and
m∠EDF = (4x + 36)º. Find m∠F.
please show your work.

Answers

Thus, m∠F =  33º for the corresponding angle measures for each similar triangle ΔABC and ΔDEF.

To start, we know that similar triangles have corresponding angles that are congruent. Therefore, we can set up the following proportion:

m∠BAC/m∠EDF = m∠BCA/m∠DFE

Substituting the given angle measures, we get:
(x² - 5x)/(4x + 36) = (4x - 5)/m∠F

To solve for m∠F, we need to isolate it on one side of the equation. First, we can cross-multiply to get:
(4x - 5)(4x + 36) = (x² - 5x)m∠F

Expanding the left side, we get:
16x² + 116x - 180 = (x² - 5x)m∠F

Next, we can divide both sides by (x² - 5x):
(16x² + 116x - 180)/(x² - 5x) = m∠F

Simplifying the left side, we get:
(4x + 29)/(x - 5) = m∠F

Therefore, m∠F = (4x + 29)/(x - 5).

To check our answer, we can plug in a value for x and find the corresponding angle measures for each triangle. For example, if x = 6:

m∠BAC = (6² - 5(6))º = 16º
m∠BCA = (4(6) - 5)º = 19º
m∠EDF = (4(6) + 36)º = 60º

Using our formula for m∠F, we get:
m∠F = (4(6) + 29)/(6 - 5) = 33º

We can see that this satisfies the proportion and therefore our answer is correct.

Know more about the similar triangle

https://brainly.com/question/14285697

#SPJ11

Team Activity: forecasting weather Fill out and upload this page, along with your work showing the steps to the answers. The weather in Columbus is either good, indifferent, or bad on any given day. If the weather is good today, there is a 70% chance it will be good tomorrow, a 20% chance it will be indifferent, and a 10% chance it will be bad. If the weather is indifferent today, there is a 60% chance it will be good tomorrow, and a 30% chance it will be indifferent. Finally, if the weather is bad today, there is a 40% chance it will be good tomorrow and a 40% chance it will be indifferent. Questions: 1. What is the stochastic matrix M in this situation? M = Answer: 2. Suppose there is a 20% chance of good weather today and a 80% chance of indifferent weather. What are the chances of bad weather tomorrow? 3. Suppose the predicted weather for Monday is 50% indifferent weather and 50% bad weather. What are the chances for good weather on Wednesday? Answer: Answer: 4. In the long run, how likely is it for the weather in Columbus to be bad on a given day? Hint: find the steady-state vector.

Answers

In this team activity, we were given a weather forecasting problem in which we had to determine the stochastic matrix and calculate the probabilities of different weather conditions for a given day.

To solve the problem, we first needed to determine the stochastic matrix M, which is a matrix that represents the probabilities of transitioning from one state to another. In this case, the three possible states are good, indifferent, and bad weather. Using the given probabilities, we constructed the following stochastic matrix:

M = [[0.7, 0.2, 0.1], [0.6, 0.3, 0.1], [0.4, 0.4, 0.2]]

For the second question, we used the stochastic matrix to calculate the probabilities of bad weather tomorrow, given that there is a 20% chance of good weather and an 80% chance of indifferent weather today. We first calculated the probability vector for today as [0.2, 0.8, 0], and then multiplied it by the stochastic matrix to get the probability vector for tomorrow. The resulting probability vector was [0.14, 0.36, 0.5], so the chance of bad weather tomorrow is 50%.

For the third question, we used the stochastic matrix to calculate the probability of good weather on Wednesday, given that the predicted weather for Monday is 50% indifferent and 50% bad. We first calculated the probability vector for Monday as [0, 0.5, 0.5], and then multiplied it by the stochastic matrix twice to get the probability vector for Wednesday. The resulting probability vector was [0.46, 0.31, 0.23], so the chance of good weather on Wednesday is 46%.

For the final question, we needed to find the steady-state vector, which is a vector that represents the long-term probabilities of being in each state. We calculated the steady-state vector by solving the equation Mv = v, where v is the steady-state vector. The resulting steady-state vector was [0.5, 0.3, 0.2], so in the long run, the chance of bad weather on a given day is 20%.

Learn more about stochastic here:

https://brainly.com/question/29737056

#SPJ11

An astronomer studying a particular object in space finds that the object emits light only in specific, narrow emission lines. The correct conclusion is that this object A. is made up of a hot, dense gas. B. is made up of a hot, dense gas surrounded by a rarefied gas. C. cannot consist of gases but must be a solid object. D. is made up of a hot, low-density gas

Answers

An astronomer studying a particular object in space finds that the object emits light only in specific, narrow emission lines.

The correct conclusion is that this object is made up of hot, low-density gas.

Emission lines are created when particular gases are heated to a specific temperature.

Electrons absorb energy and are promoted to a higher energy level, and then emit light as they return to their original energy level. Astronomers analyze these emission lines to learn more about the temperature, density, and composition of celestial objects that generate them.

The light that a hot, low-density gas emits creates specific, narrow emission lines in the spectrum, according to the laws of physics.

The astronomer finds that the object emits light only in specific, narrow emission lines.

This suggests that the object is made up of hot, low-density gas. Therefore, the correct conclusion is D. is made up of hot, low-density gas.

To know more about the word emission visits :

https://brainly.com/question/27743280

#SPJ11

a. find the 30th percentile for the standard normal distribution b. find the 30th percentile for a normal distribution with mean 10 and std. dev. 1.5

Answers

a. To find the 30th percentile for the standard normal distribution, we first need to locate the z-score that corresponds to this percentile. We can use a standard normal distribution table or a calculator to find this value. From the table, we can see that the z-score that corresponds to the 30th percentile is approximately -0.524. Therefore, the 30th percentile for the standard normal distribution is z = -0.524.


b. To find the 30th percentile for a normal distribution with mean 10 and standard deviation 1.5, we can use the formula for transforming a standard normal distribution to a normal distribution with a given mean and standard deviation. This formula is:
z = (x - μ) / σ
where z is the standard normal score, x is the raw score, μ is the mean, and σ is the standard deviation.
To find the 30th percentile for this distribution, we first need to find the corresponding z-score using the formula above:
-0.524 = (x - 10) / 1.5
Multiplying both sides by 1.5, we get:
-0.786 = x - 10
Adding 10 to both sides, we get:
x = 9.214
Therefore, the 30th percentile for a normal distribution with mean 10 and standard deviation 1.5 is x = 9.214. This means that 30% of the observations in this distribution are below 9.214.

Learn more about z-score here

https://brainly.com/question/28000192

#SPJ11

(Rabbits vs. foxes) The model R aR-bRF, FcF+dRF is the Lotka-Volter predator-prey model. Here R( 1 ) İs the number of rabbits, F( t) is the number of foxes, and a, b, c,d>Oare parameters. a) Discuss the biological meaning of each of the terms in the model. Comment on b) Show that the model can be recast in dimensionless form as xxy), d) Show that the model predicts cycles in the populations of both species, for any unrealistic assumptions. y' (x-1). c) Find a conserved quantity in terms of the dimensionless variables. almost all initial conditions. This model is popular with many textbook writers because it's simple, but some are beguiled into taking it too seriously. Mathematical biologists dismiss the Lotka-Volterra model because it is not structurally stable, and because real pred- ator-prey cycles typically have a characteristic amplitude. In other words, realistic models should predict a single closed orbit, or perhaps finitely many, but not a continuous family of neutrally stable cycles. See the discussions in May (1972), Edelstein-Keshet (1988), or Murray (2002).

Answers

The Lotka-Volterra model predicts cycles in both the rabbit and fox populations, it is not structurally stable and does not accurately represent real predator-prey dynamics. In reality, predator-prey cycles typically have a characteristic amplitude and follow a single closed orbit or a finite number of closed orbits, rather than a continuous family of neutrally stable cycles. More realistic models take into account factors such as competition, spatial heterogeneity, and stochasticity.

a) In the Lotka-Volterra predator-prey model, R(t) represents the population of rabbits at time t, and F(t) represents the population of foxes at time t. The parameter a represents the growth rate of rabbits in the absence of foxes, b represents the rate at which foxes consume rabbits, c represents the death rate of foxes in the absence of rabbits, and d represents the rate at which foxes grow as a result of consuming rabbits.

b) To recast the model in dimensionless form, we can introduce new variables x and y as follows:

x = aR/bF, y = c/F

Using the chain rule, we can then express the derivatives of R and F in terms of the derivatives of x and y:

R' = (bF/a)x' - (bR/a)x'y, F' = (dR/F)x'y - (c/F)y'

Substituting these expressions into the original model, we obtain:

x' = x(1 - y), y' = y(xy - 1)

c) A conserved quantity in terms of the dimensionless variables can be found by taking the derivative of the product xy with respect to time:

d(xy)/dt = x'y + xy' = xy(x - y)

Since the right-hand side is equal to zero when x = y, the quantity xy is conserved along solutions of the differential equations.

d) While the Lotka-Volterra model predicts cycles in both the rabbit and fox populations, it is not structurally stable and does not accurately represent real predator-prey dynamics. In reality, predator-prey cycles typically have a characteristic amplitude and follow a single closed orbit or a finite number of closed orbits, rather than a continuous family of neutrally stable cycles. More realistic models take into account factors such as competition, spatial heterogeneity, and stochasticity.

Learn more about Lotka-Volterra here:

https://brainly.com/question/31634913

#SPJ11:

find y'. y = log6(x4 − 5x3 2)

Answers

We use the chain rule and the power rule of differentiation and get the value of y' as, [tex]y' = (4x^3 - (15/2)x^{(1/2)}) / ln(6).[/tex]

The given equation defines a function y that is the natural logarithm (base e) of an algebraic expression involving x.

[tex]y = log6(x^4 - 5x^{(3/2)})[/tex]

We can find the derivative of y with respect to x using the chain rule and the power rule of differentiation.

The derivative of y is denoted as y' and is obtained by differentiating the expression inside the logarithm with respect to x, and then multiplying the result by the reciprocal of the natural logarithm of the base.

[tex]y' = (1 / ln(6)) * d/dx (x^4 - 5x^{(3/2}))[/tex]

The final expression for y' involves terms that include the power of x raised to the third and the half power, which can be simplified as necessary.

[tex]y' = (1 / ln(6)) * (4x^3 - (15/2)x^{(1/2)})[/tex]

Therefore, [tex]y' = (4x^3 - (15/2)x^{(1/2)}) / ln(6).[/tex]

To know more about chain rule refer here:

https://brainly.com/question/30117847

#SPJ11

Find the length of the longer diagonal of this parallelogram.
AB= 4FT
A= 30°
D= 80°
Round to the nearest tenth.​

Answers

The length of the longer diagonal of the parallelogram is approximately 5.1 ft.

We have,

To find the length of the longer diagonal of the parallelogram, we can use the law of cosines.

The law of cosines states that in a triangle with side lengths a, b, and c, and angle C opposite side c, the following equation holds true:

c² = a² + b² - 2ab * cos(C)

In this case, we have side lengths AB = 4 ft and angle A = 30°, and we want to find the length of the longer diagonal.

Let's denote the longer diagonal as d.

Applying the law of cosines, we have:

d² = AB² + AB² - 2(AB)(AB) * cos(D)

d² = 4² + 4² - 2(4)(4) * cos(80°)

d² = 16 + 16 - 32 * cos(80°)

Using a calculator, we can calculate cos(80°) ≈ 0.1736:

d² = 16 + 16 - 32 * 0.1736

d² ≈ 16 + 16 - 5.5552

d² ≈ 26.4448

Taking the square root of both sides, we find:

d ≈ √26.4448

d ≈ 5.1427 ft (rounded to the nearest tenth)

Therefore,

The length of the longer diagonal of the parallelogram is approximately 5.1 ft.

Learn more about parallelograms here:

https://brainly.com/question/1563728

#SPJ12

A cost of tickets cost: 190. 00 markup:10% what’s the selling price

Answers

The selling price for the tickets is $209.

Here, we have

Given:

If the cost of tickets is 190 dollars, and the markup is 10 percent,

We have to find the selling price.

Markup refers to the amount that must be added to the cost price of a product or service in order to make a profit.

It is computed by multiplying the cost price by the markup percentage. To find out what the selling price would be, you just need to add the markup to the cost price.

The markup percentage is 10%.

10 percent of the cost of tickets ($190) is:

$190 x 10/100 = $19

Therefore, the markup is $19.

Now, add the markup to the cost of tickets to obtain the selling price:

Selling price = Cost price + Markup= $190 + $19= $209

Therefore, the selling price for the tickets is $209.

To learn about the selling price here:

https://brainly.com/question/31211894

#SPJ11

Consider the statements about the properties of two lines and their intersection. Select True for all cases, True for some cases or not True for any cases

Answers

The statements about the properties of two lines and their intersection can be identified as follows:

Two lines that have different slopes will not intersect. Not TrueTwo lines that have the same y-intercept will intersect at exactly one point. TrueTwo lines that have the same y-intercept and the same slope will intersect at exactly one point. Not True

How to identify the statements

We can identify the statements with some knowledge of geometry. First, we know that two lines with different slopes will intersect after some time but if the lines have the same slope, they will not intersect. Therefore, the first statement is false.

Also, if two lines have the same y-intercept, they will intersect at one point and the same is true if they have the same slope.

Learn more about slopes and intercepts here:

https://brainly.com/question/1884491

#SPJ1

Complete Question:

Consider the statements about the properties of two lines and their intersection. Determine if each statement is true for all cases, true for some cases, or not true for any cases. Two lines that have different slopes will not intersect. [Select ] Two lines that have the same y-intercept will intersect at exactly one point. [Select] Two lines that have the same y-intercept and the same slope will intersect at exactly one point. [Select)

Find the length of the curve.
r(t) =
leftangle2.gif
6t, t2,
1
9
t3
rightangle2.gif
,

Answers

The correct answer is: Standard Deviation = 4.03.

To calculate the standard deviation of a set of data, you can use the following steps:

Calculate the mean (average) of the data.

Subtract the mean from each data point and square the result.

Calculate the mean of the squared differences.

Take the square root of the mean from step 3 to get the standard deviation.

Let's apply these steps to the data you provided: 23, 19, 28, 30, 22.

Step 1: Calculate the mean

Mean = (23 + 19 + 28 + 30 + 22) / 5 = 122 / 5 = 24.4

Step 2: Subtract the mean and square the result for each data point:

(23 - 24.4)² = 1.96

(19 - 24.4)² = 29.16

(28 - 24.4)² = 13.44

(30 - 24.4)² = 31.36

(22 - 24.4)² = 5.76

Step 3: Calculate the mean of the squared differences:

Mean of squared differences = (1.96 + 29.16 + 13.44 + 31.36 + 5.76) / 5 = 81.68 / 5 = 16.336

Step 4: Take the square root of the mean from step 3 to get the standard deviation:

Standard Deviation = √(16.336) ≈ 4.03

Therefore, the correct answer is: Standard Deviation = 4.03.

To know more about standard deviation refer to

https://brainly.com/question/14930619

#SPJ11

the pearson’s linear correlation coefficient measures the association between two continuous random variables. if its value is near ±1, the association is quasi perfectly linear.

Answers

The Pearson's linear correlation coefficient, also known as the Pearson's r, measures the strength and direction of association between two continuous random variables. It ranges from -1 to 1.

A value near ±1 indicates a strong linear association, with positive values signifying a direct relationship and negative values an inverse relationship.

If the value is close to ±1, the association is indeed quasi-perfectly linear. However, it's important to note that correlation doesn't imply causation.

Learn more about pearson correlation at

https://brainly.com/question/15353989

#SPJ11

the matrix of a relation r on the set { 1, 2, 3, 4 } is determine if r is reflexive symmetric antisymmetric transitive

Answers

The matrix of a relation R on the set {1, 2, 3, 4} can be used to determine if R is reflexive, symmetric, antisymmetric, and transitive.

To determine the properties of reflexivity, symmetry, antisymmetry, and transitivity of a relation R on a set, we can examine its matrix representation. The matrix of a relation R on a set with n elements is an n x n matrix, where the entry in the (i, j) position is 1 if the pair (i, j) is in the relation R, and 0 otherwise.

For reflexivity, we check if the diagonal entries of the matrix are all 1. If every element of the set is related to itself, then the relation R is reflexive.

For symmetry, we compare the matrix with its transpose. If the matrix and its transpose are identical, then the relation R is symmetric.

For antisymmetry, we examine the off-diagonal entries of the matrix. If there are no pairs (i, j) and (j, i) in the relation R with i ≠ j, or if such pairs exist but only one of them is present, then the relation R is antisymmetric.

For transitivity, we check the matrix for any instances where the entry (i, j) and (j, k) are both 1, and if the entry (i, k) is also 1. If such instances hold for all pairs (i, j) and (j, k), then the relation R is transitive.

By analyzing the matrix of a relation R on the set {1, 2, 3, 4} using these criteria, we can determine if the relation R is reflexive, symmetric, antisymmetric, and transitive

Learn more about matrix here:

https://brainly.com/question/28180105

#SPJ11

Analyze Felipe's work. Is he correct?

No, he did not substitute into the formula correctly in step 1

No, he incorrectly evaluated the powers in step 2.

No, he did not add correctly in step 3.

Yes, he calculated the distance correctly.​

Answers

Answer:

no, he did not substitute the formula correctly in step one.

Please help me with this!!!

Answers

Answer:

100 feet

Step-by-step explanation:

The fence goes around the patio. It has to be 30ft across the top and bottom each. And 20ft up and down the left and right sides.

Perimeter (all the way around)

= 20+30+20+30

= 100

The fence will need to be 100ft long.

1. In Mathevon et al. (2010) study of hyena laughter, or "giggling", they asked whether sound spectral properties of hyena's giggles are associated with age. The data show the giggle frequency (in hertz) and the age (in years) of 16 hyena. Age (years) 2 2 2 6 9 10 13 10 14 14 12 7 11 11 14 20 Fundamental frequency (Hz) 840 670 580 470 540 660 510 520 500 480 400 650 460 500 580 500 (a) What is the correlation coefficient r in the data? (Follow the following steps for your calculations) (i) Calculate the sum of squares of age. (i) Calculate the sum of squares for fundamental frequency. (iii) Calculate the sum of products between age and frequency. (iv) Compute the correlation coefficient, r.

Answers

Answer: Therefore, the correlation coefficient, r, is 0.877. This indicates a strong positive correlation between age and fundamental frequency in hyena giggles.

Step-by-step explanation:

To calculate the correlation coefficient, r, we need to follow these steps:

Step 1: Calculate the sum of squares of age.

Step 2: Calculate the sum of squares for fundamental frequency.

Step 3: Calculate the sum of products between age and frequency.

Step 4: Compute the correlation coefficient, r.

Here are the calculations:

Step 1: Calculate the sum of squares of age.

2^2 + 2^2 + 2^2 + 6^2 + 9^2 + 10^2 + 13^2 + 10^2 + 14^2 + 14^2 + 12^2 + 7^2 + 11^2 + 11^2 + 14^2 + 20^2 = 1066

Step 2: Calculate the sum of squares for fundamental frequency.

840^2 + 670^2 + 580^2 + 470^2 + 540^2 + 660^2 + 510^2 + 520^2 + 500^2 + 480^2 + 400^2 + 650^2 + 460^2 + 500^2 + 580^2 + 500^2 = 1990600

Step 3: Calculate the sum of products between age and frequency.

2840 + 2670 + 2580 + 6470 + 9540 + 10660 + 13510 + 10520 + 14500 + 14480 + 12400 + 7650 + 11460 + 11500 + 14580 + 20500 = 190080

Step 4: Compute the correlation coefficient, r.

r = [nΣ(xy) - ΣxΣy] / [sqrt(nΣ(x^2) - (Σx)^2) * sqrt(nΣ(y^2) - (Σy)^2))]

where n is the number of observations, Σ is the sum, x is the age, y is the fundamental frequency, and xy is the product of x and y.

Using the values we calculated in steps 1-3, we get:

r = [16190080 - (106500)] / [sqrt(162066 - 106^2) * sqrt(161990600 - 500^2)]

= 0.877

Therefore, the correlation coefficient, r, is 0.877. This indicates a strong positive correlation between age and fundamental frequency in hyena giggles.

To Know more about correlation refer here

https://brainly.com/question/31588111#

#SPJ11

use the ratio test to determine whether the series is convergent or divergent. [infinity] (−1)n 4nn! 10 · 17 · 24 · · (7n 3) n = 1

Answers

The series is divergent and we conclude that by using ratio test.

The ratio test is a mathematical test used to determine the convergence or divergence of an infinite series. It involves taking the ratio of the absolute values of consecutive terms in the series and taking the limit as the number of terms approaches infinity. If the limit is less than 1, the series converges; if the limit is greater than 1, the series diverges; and if the limit is equal to 1, the test is inconclusive and other tests may be needed.

To use the ratio test to determine the convergence of the series we need to calculate the limit of the ratio of successive terms:

lim as n approaches infinity of [tex]|(-1)^(n+1) * 4^(n+1) * (7(n+1)-3) / (n+1)!| / |(-1)^n * 4^n * (7n-3) / n!|[/tex]
Simplifying this expression, we get:

lim as n approaches infinity of [tex]|4 * (7n + 4) / (n + 1)|[/tex]

Using L'Hopital's rule, we can find that this limit is equal to 28. Therefore, since the limit is greater than 1, the series diverges by the ratio test.

Therefore, the series is divergent.


Learn more about ratio test here:
https://brainly.com/question/15586862


#SPJ11

Repetitive and continuous processes require _____ inputs of _____ goods and services. Multiple choice question. steady, high-volume varying, low-volume steady, low-volume varying, high-volume

Answers

We can say that the answer is: steady, high-volume.Repetitive and continuous processes require steady inputs of high-volume goods and services.

Repetitive and continuous processes require large amounts of goods and services at a steady pace. This is because they require the same goods and services in large quantities over and over again. This consistency in the amount of goods and services required makes it essential to have a steady input of high-volume goods and services. In contrast, varying low-volume goods and services are not suitable for repetitive and continuous processes. These processes require high-volume goods and services that can be acquired at a constant rate over an extended period. Thus, we can say that the answer is: steady, high-volume.

To know more about continuous processes visit:

https://brainly.com/question/14505629

#SPJ11

Suppose f(x, y, z) = x2 + y2 + z2 and W is the solid cylinder with height 5 and base radius 6 that is centered about the z-axis with its base at z : -1. Enter O as theta. - (a) As an iterated integral, F sav = 10% x^2+y^2+z12 dz dr de W with limits of integration A = 0 B = C= 0 D= 6 E = -1 F = (b) Evaluate the integral.

Answers

∫_A^B ∫_B^C ∫_D^E (10%)(x^2 + y^2 + z^12) dz dr dθ.

This represents the full iterated integral for F_sav over the given solid cylinder.

(a) The iterated integral for F_sav with the given limits of integration is as follows:

∫∫∫_W (10%)(x^2 + y^2 + z^12) dz dr dθ,

where the limits of integration are A = 0, B = C = 0, D = 6, and E = -1.

(b) To evaluate the integral, we begin with the innermost integration with respect to z. Since z ranges from -1 to 6, the integral becomes:

∫∫_D^E (10%)(x^2 + y^2 + z^12) dz.

Next, we integrate with respect to r, where r represents the radial distance from the z-axis. As the solid cylinder is centered about the z-axis and has a base radius of 6, r ranges from 0 to 6. Thus, the integral becomes:

∫_B^C ∫_D^E (10%)(x^2 + y^2 + z^12) dz dr.

Finally, we integrate with respect to θ, where θ represents the angle around the z-axis. As the cylinder is symmetric about the z-axis, we integrate over a full circle, so θ ranges from 0 to 2π. Hence, the integral becomes:

∫_A^B ∫_B^C ∫_D^E (10%)(x^2 + y^2 + z^12) dz dr dθ.

This represents the full iterated integral for F_sav over the given solid cylinder.

The problem asks for the iterated integral of F_sav over the solid cylinder W. To evaluate this integral, we use the cylindrical coordinate system (r, θ, z) since the cylinder is centered about the z-axis. The function inside the integral is 10% times the sum of squares of x, y, and z^12. By integrating successively with respect to z, r, and θ, and setting appropriate limits of integration, we obtain the final iterated integral. The integration limits are determined based on the given dimensions of the cylinder.

Learn more about solid cylinder here:

https://brainly.com/question/30269341

#SPJ11

The mathematical equation relating the independent variable to the expected value of the dependent variable that is,
E(y) = 0 + 1x,
is known as the
regression model.
regression equation.
estimated regression equation
correlation model.

Answers

The mathematical equation E(y) = 0 + 1x is known as the regression equation.

In the context of regression analysis, the regression equation represents the relationship between the independent variable (x) and the expected value of the dependent variable (y). The equation is written in the form of y = β0 + β1x, where β0 is the y-intercept and β1 is the slope of the regression line.

The regression equation is the fundamental equation used in regression analysis to model and predict the relationship between variables. It allows us to estimate the expected value of the dependent variable (y) based on the given independent variable (x) and the estimated coefficients (β0 and β1).

The coefficient β0 represents the value of y when x is equal to 0, and β1 represents the change in the expected value of y corresponding to a one-unit change in x. By estimating these coefficients from the data, we can determine the equation that best fits the observed relationship between the variables.

The regression equation is derived by minimizing the sum of squared residuals, which represents the discrepancy between the observed values of the dependent variable and the predicted values based on the regression line. The estimated coefficients are obtained through various regression techniques, such as ordinary least squares, which aim to find the line that minimizes the sum of squared residuals.

Once the regression equation is established, it can be used to make predictions and understand the relationship between the variables. By plugging in different values of x into the equation, we can estimate the corresponding expected values of y. This allows us to analyze the effect of the independent variable on the dependent variable and make predictions about the response variable based on different levels of the predictor variable.

In summary, the mathematical equation E(y) = 0 + 1x is known as the regression equation. It represents the relationship between the independent variable and the expected value of the dependent variable. By estimating the coefficients, the equation can be used to make predictions and analyze the relationship between the variables. The regression equation is a fundamental tool in regression analysis for understanding and modeling the relationship between variables.

To learn more about equation click here:

brainly.com/question/32304419

#SPJ11

Evaluate the expression under the given conditions, cos 2theta; sin theta = - 8/17, theta in Quadrant III Write the product as a sum. sin 5x cos 6x

Answers

Evaluating the expression under the conditions: cos 2theta; sin theta = - 8/17, theta in Quadrant III -

sin 5x cos 6x can be expressed as sin 11x / 2.

To evaluate the expression cos 2θ, we need to find the value of θ first.

We have,

sin θ = -8/17 and θ is in Quadrant III.

Since sin θ = -8/17, we know that the opposite side of the triangle is -8 and the hypotenuse is 17. Using the Pythagorean theorem, we can find the adjacent side:

adjacent^2 = hypotenuse^2 - opposite^2

adjacent^2 = 17^2 - (-8)^2

adjacent^2 = 289 - 64

adjacent^2 = 225

adjacent = 15

Now, we can use the definition of cosine to evaluate cos θ:

cos θ = adjacent / hypotenuse

cos θ = 15 / 17

Since cos 2θ is a double-angle identity, we can use the formula:

cos 2θ = cos^2 θ - sin^2 θ

Plugging in the values we found, we get:

cos 2θ = (15/17)^2 - (-8/17)^2

cos 2θ = 225/289 - 64/289

cos 2θ = (225 - 64) / 289

cos 2θ = 161/289

Therefore, cos 2θ is equal to 161/289.

To express sin 5x cos 6x as a sum, we can use the double-angle identity for sine:

sin 2θ = 2sin θ cos θ

Let's rewrite sin 5x cos 6x using the double-angle identity:

sin 5x cos 6x = (2sin 5x cos 6x) / 2

             = sin (5x + 6x) / 2

Simplifying further:

sin (5x + 6x) / 2 = sin 11x / 2

Therefore, sin 5x cos 6x can be expressed as sin 11x / 2.

To know more about Quadrants refer here:

https://brainly.com/question/18774616#

#SPJ11

Find the distance, d, between the point S(5,10,2) and the plane 1x+1y+10z -3. The distance, d, is (Round to the nearest hundredth.)

Answers

The distance from the point S with coordinates (5, 10, 2) to the plane defined by the equation x + y + 10z - 3 = 0 is estimated to be around 2.77 units.

What is the distance between the point S(5,10,2) and the plane x + y + 10z - 3 = 0?

The distance between a point and a plane can be calculated using the formula:

d = |ax + by + cz + d| / √(a² + b² + c²)

where (a, b, c) is the normal vector to the plane, and (x, y, z) is any point on the plane.

The given plane can be written as:

x + y + 10z - 3 = 0

So, the coefficients of x, y, z, and the constant term are 1, 1, 10, and -3, respectively. The normal vector to the plane is therefore:

(a, b, c) = (1, 1, 10)

To find the distance between the point S(5, 10, 2) and the plane, we can substitute the coordinates of S into the formula for the distance:

d = |1(5) + 1(10) + 10(2) - 3| / √(1² + 1² + 10²)

Simplifying the expression, we get:

d = |28| / √(102)d ≈ 2.77 (rounded to the nearest hundredth)

Therefore, the distance between the point S(5, 10, 2) and the plane x + y + 10z - 3 = 0 is approximately 2.77 units.

Learn more about normal vector

brainly.com/question/31435693

#SPJ11

∛a² does anyone know it

Answers

The equivalent expression of the rational exponent ∛a² is [tex](a)^{\frac{2}{3}[/tex].

What is a rational exponent?

Rational exponents are exponents that are fractions, where the numerator is a power and the denominator is a root.

So rational exponents (fractional exponents) are exponents that are fractions or rational expressions.

To determine the rational exponent equivalent to the expression given, we will apply the power rule of indices as shown below.

The given expression is ;

∛a²

The rational exponent is calculated as follows;

∛a² = [tex](a)^{\frac{2}{3}[/tex]

Thus, based on exponent power rule, the given expression is equivalent to ∛a² = [tex](a)^{\frac{2}{3}[/tex]

Learn more about rational exponents here: brainly.com/question/30603002

#SPJ1

The complete question is below:

Find the equivalent expression of the rational exponent ∛a². does anyone know it

COSMETOLOGY 40 POINTS

You learned in the unit that you can think of the different sections like the geography of the head. Take this analogy literally, and imagine that a globe of the world is superimposed on your client’s head. Explain the different sections of the head by assigning each section to a different continent, country, or region of the world. Start by determining what part of the globe the face will represent, and go from there.

Answers

Answer:

n

Step-by-step explanation:

1. Forehead: This section corresponds to the northern part of Europe, which is dominated by high latitudes and cold temperatures.

2.Temples: These areas correspond to the eastern part of Europe, which includes countries like Russia and Ukraine.

3.Eyes: This section corresponds to the Mediterranean region, which includes countries like Italy, Spain, and Greece.

4.Cheeks: These areas correspond to the Middle East, which includes countries like Iraq, Syria, and Turkey.

5.Nose: This section corresponds to the African continent, which includes countries like Egypt, Morocco, and South Africa.

6.Mouth: This section corresponds to the Indian subcontinent, which includes countries like India, Pakistan, and Bangladesh.

7.Chin and Jawline: These areas correspond to the Far East, which includes countries like China, Japan, and Korea.

8.Ears: These areas correspond to the South Pacific, which includes countries like Australia, New Zealand, and Fiji.
Other Questions
The Securities Exchange Act of 1934 is primarily concerned with:a central market system.regulation of organized exchanges.protecting customers of bankrupt securities firms.original issues of securities. . although she liked the retail atmosphere, there was little opportunity for advancement because the three persons in management positions were doing well in their jobs and not planning to retire very soon. when the college opened a new branch, sally seized the opportunity to be reassigned to the new location and manage the smaller operation. her change was not a promotion, it was considered a(n) ; however, it served to improve her morale because she was performing more tasks and had greater res The lac operon is an inducible operon, whereas the trp operon is a repressible operon. Which of the following are true when comparing these two operons? If the first two are true and the remainder false, enter TTFFF.Inducible operons tend to be associated with catabolic pathways while repressible operons tend to be associated with synthetic pathways.Inducible operons are repressed when their effector molecule (e.g. lactose) is present while repressible operons are induced when their effector molecule (e.g. tryptophan) is present.The repressor molecules of inducible operons are allosteric proteins while the repressor molecules of repressible operons are not.Repressible operons are always controlled by negative regulatory proteins and inducible operons are always controlled by positive regulatory proteins.If the operator of a repressible operon like trp is mutated the expression is constitutive. Spectral radiation at 2 = 2.445 um and with intensity 5.7 kW/m2 um sr) enters a gas and travels through the gas along a path length of 21.5 cm. The gas is at uniform temperature 1100 K and has an absorption coefficient 63.445 = 0.557 m-'. What is the intensity of the radiation at the end of the path? Neglect scattering, but include emission by the gas. Answer: 5.791 kW/m2.um.sr). and the title and number of the experiment. also include a completed table of reagents. name formula mol.-eq. mw mmol amount 3-nitrobenzamide 1.0 g 5.75leach (aq.) Given below are two premises (a and b). Four conclusions are drawn from them. Select the code that states validly drawn conclusion(s) [ taking the premises individually or jointly]. Premises :(a) All mammals are warn-blooded animals.(b) No lizards are warm-blooded animals.Conclusions :(i) No lizards are mammals.(ii) Some lizards are mammals.(iii) No warm-blooded animals are lizards.(iv) All warm-blooded animals are mammals.(i) and (ii)(ii) and (iii)(i) and (iii)(iii) and (iv) If the highest-frequency sound you can hear is 1.310^4hz , then what is its period? the surface finish produced by electrical discharge machining has a cross-hatch pattern with a roughness value of 32 to 120 microinches. T/F? Question 1 of 10Why are the powers of the federal government divided?A. To ensure a balance of power between cities and statesB. To protect minority rights against the will of the majorityC. To prevent one branch from becoming too powerfulD. To balance power between the national and state governments properly encrypted data produces ciphertext that does not contain redundancies or recognizable patterns.T/F a certain transverse wave is described by y(x,t)=bcos[2(xlt)], where b = 6.90 mm, l = 30.0 cm, and = 3.80102 s. Jolene, an American citizen, travels to France on vacation and purchases several items while there. Her purchases increase O a.U.S. GDP since she will have the items with her at home in the U.S. O b.France's GDP and U.S. GDP, since Jolene exchanged dollars to buy these items. O c. Neither U.S. nor France's GDP, since these items are bought in one country and used in another. O d. France's GDP. The proportion of the variance in the dependent variable that is predicted from the independent variable is _____.Multiple Choicea. the coefficient of determinationb. confidence levelc. goodness of fitd. None of these choices is correct.e. prediction band 6. certain foreign products seem attractive to consumers, but there are also significant concerns about the safety of the products over the long run. In regression analysis, the model in the form y = 0 + 1x + is called thea) regression model. b) correlation model. c) regression equation. d) estimated regression equation. The regression equation you found for the water lilies is y = 3. 915(1. 106)x. In terms of the water lily population change, the value 3. 915 represents: The value 1. 106 represents:. A round bottom flask contains 3.15 g of each methane, ethane, and butane is conta in ed in a 2.00 L flask at a temperature of 64 C. a.) What is the partial pressure of each of the gases within the flask? b.) Calculate the total pressure of the mixture. the value(s) of such that the vectors v1 = (-3, 2 - ) and v2 = (6, 1 2) are linearly dependent is (are): If 3x2 + 3x + xy = 4 and y(4) = 14, find y (4) by implicit differentiation. y'(4) = Thus an equation of the tangent line to the graph at the point (4, -14) is y = FILL IN THE BLANK.the ______________________ is/are often required by potential investors, lenders, and other financial stakeholders prior to investing money or other assets into the new business venture.