Therefore, the minimum possible temperature in degree C of the hot reservoir is 313.2 degree C.
The efficiency of a heat engine is given by:
efficiency = (work output) / (heat input)
Since the engine exhausts 20.0 J of waste heat during each cycle, the heat input is equal to the sum of the work output and the waste heat:
heat input = work output + waste heat
heat input = 20.0 J + 20.0 J
heat input = 40.0 J
Therefore, the efficiency of the engine is:
efficiency = (work output) / (heat input)
efficiency = 20.0 J / 40.0 J
efficiency = 0.5 or 50%
The efficiency of the engine is 50%.
The minimum possible temperature in degree C of the hot reservoir can be found using the Carnot efficiency equation:
efficiency = 1 - (T_cold / T_hot)
here T_cold is the temperature of the cold reservoir (in Kelvin) and T_hot is the temperature of the hot reservoir (in Kelvin).
Converting 20.0 degree C to Kelvin, we get:
T_cold = 20.0 degree C + 273.15 = 293.15 K
Substituting the given efficiency of 50% and T_cold into the Carnot efficiency equation, we get:
0.5 = 1 - (293.15 / T_hot)
0.5 = (T_hot - 293.15) / T_hot
Solving for T_hot, we get:
T_hot = 586.3 K = 313.2 degree C (rounded to one decimal place)
To know more about temperature,
https://brainly.com/question/29072206
#SPJ11
During a heated game of bocce ball, Ursula is attempting to knock the pallino (the small, white target ball) away from where her opponent's balls lie on the ground. She can do this by throwing her ball so that it lands directly on top of the pallino, which is
x=17 m
horizontally downcourt from where she throws. If she releases the ball
y=0.90 m
above the ground at an angle of
θ=23
∘
above the horizontal, then how much time will the ball spend airborne before hitting the pallino? Both balls may be treated as point particles in this problem.
a body travels from rest with acceleration 8ms-2. Find it velocity when it has covered a distance of 100meters
40 m/s
We have the equation of motion v^2-u^2= 2as ------------- ( i)
where v = final velocity which is unknown let it be x m/s
u = initial velocity which is 0 m/s ...( The body starts from rest )
a = Acceleration gained by body = 8 m/s^2
s stands for distance covered in till v velocity which is 100 meters.
So by using equation( i)
x^2- 0 = 2*100*8x^2 = 1600x = Sqrt(1600)x = 40So the velocity of the body will be 40 m/s when it had a covered distance of 100 meters.
Learn More about this Equation of Motion: https://brainly.com/question/17098264
Calculator
An object is placed 4m above ground. The object has a mass of 4kg and the gravitational potential energy stored is 3J.
What is the gravitational field strength experienced by the object?
Give your answer to 2 decimal places.
Thus, g = GPE / (m*h) = 3 / (4*4) = 0.75 m/s2. Therefore, the gravitational field strength experienced by the object is 0.75 m/s2.
What is gravitational field strength?
Gravitational field strength is a measure of the gravitational force per unit mass at a given location in space.It is typically measured in Newtons per kilogram (N/kg) or meters per second squared (m/s2). Gravitational field strength is an important concept in understanding the effects of gravity on objects and how it affects their behavior.
It is represented by the symbol g and is calculated by dividing the gravitational force by the mass of an object. It is typically measured in units of meters per second squared (m/s2).
To learn about more gravitational field strength.
brainly.com/question/14080810
#SPJ1
Mars has two moons, Phobos and Deimos. Based on the image shown,
describe the force vectors representing the gravitational interactions
between Phobos, Deimos, and Mars. Based on the image, choose the
option that correctly identifies the missing terms, in order of their
appearance in the sentences. Mars has
force vectors pointing in
vector on Phobos from the force of gravity of Deimos is
the force vector on Deimos from the force of gravity of Phobos.
gravitational
The magnitude of the force
Answer:
3
Explanation:
seems more reasonable because of the fact that the other moon is on the other gravitational pull because of the outer ring and are the exact opposite sides
A machine gun fires 25-g bullets at the rate of 4 bullets per second. The bullets leave the gun at a speed of 1000 m/s. What is the average recoil force experienced by the machine gun?.
Answer:
100 N
Explanation:
For ONE bullet ( .025 kg)
fired to 1000 m/s in .25 s ( four per second)
acceleration = 1000 m/s / .25 s = 4000 m/s^2
then F = ma
= .025 kg * 4000 m/s^2 = 100 N
Is DNA the nucleic acid that carries genetic information?
Deoxyribonucleic acid (DNA) is the nucleic acid that carries genetic information in the human body.
Deoxyribonucleic acid or DNA is the molecule that carries the genetic information for the development and functioning of an organism in the human body. DNA is made of two connected strands that wind around each other to resemble a twisted ladder -a shape referred to as a double helix. Thus, DNA is the nucleic acid that performs the function of carrying genetic information that is to be transferred from one generation to the next generation.
You can learn more about DNA at
https://brainly.com/question/2131506
#SPJ4
A 5.28 kilogram bowling ball traveling 6.5 m/s east collides head-on with a 3.45 kilogram bowling ball traveling 12.0 m/s west. Determine the magnitude
of the total momentum of the two ball system after the collision.
The momentum of an isolated system before and after a collision must equal each other, according to the law of conservation of momentum.
In a collision, why does momentum remain constant?The only thing that happens when two bodies collide is that their momentum changes. Thus, for bodies colliding, changes in momentum are always equal and opposite. The momentum of the other body must decrease by the same amount if the momentum of the first body increases. As a result, momentum always remains constant.
In every collision, is momentum always conserved?Regardless of the type of collision, momentum is always conserved. Although mass is conserved regardless of the type of collision, an inelastic collision may cause the mass to deform, leading to the two possibilities.
To know more about momentum visit:-
brainly.com/question/29113044
#SPJ1
bike is traveling with a velocity of 22 m/s and has a mass of 25 kg. How much kinetic
energy does the bike have? PSc. 3.1.2
Answer: 12,100 Joules of Kinetic Energy
Explanation:
Kinetic energy is a measure of how much energy something has because it's moving. To calculate the kinetic energy of a bike, you need to know how heavy it is and how fast it's going. We use a formula that looks like this:
(1/2) x the weight of the bike (in kilograms) x the speed of the bike (in meters per second) x the speed of the bike (in meters per second)
So if we have a bike that weighs 25 kilograms and is going 22 meters per second, we can plug those numbers into the formula like this:
(1/2) x 25 x 22 x 22
And we find out that the bike has 12,100 Joules of kinetic energy.
Please help, will give brainiest
QUESTION 1.
Element X on Planet Qatar has three known isotopes: X-121 with a relative abundance of 43.2%, X-123 with a relative abundance of 53.1%, and X-129 with a relative abundance of 3.70%. What is the average atomic mass in amu of Element X given this information?
QUESTION 2.
How did Rutherford's experiment change the way scientists had previously viewed atomic structure? How did this pave the way for subsequent changes up to and including the currently accepted quantum mechanical atomic model?
QUESTION 3.
How is percent abundance related to average atomic mass?
a) The relative atomic mass is 122.35 amu
b) The Rutherford model introduced the planetary model
c) The percentage abundance shows how much of that mass is present.
What is the relative atomic mass?We have to know that as what we need here is the relative atomic mass of the element X then we must have to be able to look at the weighted average of all the isotopes that have been shown to belong to the element that is in question called X.
Thus we would have;
(121 * 0.432) + (123 * 0.531) + (129 * 0.037)
= 52.27 + 65.31 + 4.773
= 122.35 amu
Learn more about atomic mass:https://brainly.com/question/17067547
#SPJ1
A bowling ball is dropped off of the side of a building. Ignore the effects of air resistance. As the ball continues to fall freely, the kinetic energy of the ball.
The ball continues to fall, its kinetic energy will increase.
What is kinetic energy?Kinetic energy is the energy an object possesses due to its motion. It is the energy associated with an object’s speed and mass, and is the energy that an object has because of its movement. Kinetic energy can be converted into other forms of energy, such as heat, light, or sound. It can also be used to do work, such as moving objects or powering machines. Kinetic energy is a form of mechanical energy, which is energy that is associated with the motion or position of an object. Kinetic energy is related to the work done on an object, and it increases as the object’s speed increases. Kinetic energy can be calculated using the formula KE = ½mv2, where m is the mass of the object and v is the velocity of the object.
The kinetic energy of the ball will increase as it falls, because it is gaining speed due to gravity.
As it falls, it accelerates at a rate of 9.8 m/s^2, and its kinetic energy is equal to its mass multiplied by the square of its velocity.
Therefore, as the ball continues to fall, its kinetic energy will increase.
To learn more about kinetic energy
https://brainly.com/question/20658056
#SPJ4
How does magnetic energy transform into
kinetic energy
Answer:
Magnetic energy can be transformed into kinetic energy in a variety of ways.
Explanation:
One way that this occurs is through electromagnetic induction. This occurs when a changing magnetic field induces an electric current in a conductor, such as a wire. This induced current creates a force that can move the conductor, thus transforming the magnetic energy into kinetic energy. This process is used in electric generators, which convert the kinetic energy of a turbine into electrical energy by turning a coil of wire inside a magnetic field.
Another way that magnetic energy can be transformed into kinetic energy is through the operation of an electric motor. An electric motor uses the interaction between a magnetic field and an electric current to create a force that can rotate a shaft, thus transforming the electrical energy into kinetic energy. Electric motors are used in a wide range of applications, including transportation, manufacturing, and household appliances.
Magnetic energy can also be transformed into kinetic energy through magnetohydrodynamics (MHD), which involves the interaction of a fluid with a magnetic field. When a fluid such as a gas or liquid moves through a magnetic field, it can generate a force that can propel the fluid, thus transforming the magnetic energy into kinetic energy. This process is used in some forms of propulsion, including maglev trains and MHD generators.
In summary, magnetic energy can be transformed into kinetic energy through the interaction of a magnetic field with a conductor, an electric current, or a fluid, which creates a force that can move an object, thus transforming the magnetic energy into kinetic energy.
How long before the expansion of the universe causes our earth to drift away from the sun?
The expansion of the universe does not affect the relative position of astronomical bodies within galaxies.
What is the universe?The universe is described as all of space and time and their contents, including planets, stars, galaxies, and all other forms of matter and energy.
We know for a fact that the universe is expanding, but this does not alter the distance between the earth and the sun. It also does not have a bearing from the distance between atoms.
The expansion of the universe is known to be partly caused by the Big Bang, and partly caused by dark energy.
The stars are more or less static relative to a spacetime fabric that is itself expanding, hence the expansion should not be thought of as stars flying away from each other in a static spacetime fabric.
Learn more about the universe at: https://brainly.com/question/805395\
#SPJ1
Answer:
The relative location of astronomical bodies within galaxies is unaffected by the expansion of the universe. True, the cosmos is expanding, but this has no effect on the distance between the Earth and the Sun.
Explanation:
How can a protective device minimizethe magnitude of the net
force acting on an egg in a cart during a collision?
A protective device such as an egg carton, foam padding, or bubble wrap can be used to minimize the magnitude of the net force acting on an egg in a cart during a collision by providing cushioning some of the impact.
What is magnitude?
Magnitude refers to the size or scale of an object, event, or phenomenon. It is typically used to describe the intensity or amplitude of a physical quantity, such as the strength of an earthquake or the brightness of a star. Magnitude is also used to quantify the size of a population, the severity of an economic downturn, or the power of a political movement. Magnitude is usually expressed as a numerical value, such as a number on a Richter scale or a magnitude rating on a star catalog. Magnitude can also be expressed in terms of a relative or subjective scale, such as a rating of “strong” or “weak” for an earthquake. Magnitude is often used in scientific research to quantify the size of a phenomenon, such as the magnitude of climate change or the magnitude of a new medical breakthrough.
To learn more about magnitude
https://brainly.com/question/24468862
#SPJ1
calculate the movement of a 2000-kg truck travelling 19m/s. show your work
Answer: 38000N
Explanation:
Movement -> inertia -> force -> rate of change of momentum
Momentum = mv
= mass x velocity
= 2000 x 19
= 38000N
Answer:
38,000 kg·m/s
Explanation:
Did you mean "momentum"? If so, here is the solution:
Momentum = p = mv = (2000 kg)(19 m/s) = 38,000 kg·m/s
Kamala made a table to describe parts of the electromagnetic spectrum. A 3-column table with 4 rows. The first column labeled wave has entries visible, microwaves, infrared, gamma rays. The second column labeled frequency has entries medium, low, low, very low. The third column labeled wavelength has entries medium, long, long, very short. What mistake did kamala make? gamma rays should have a very high frequency, not a very low frequency. Visible light should have a low frequency and a long wavelength. Infrared light should have a short wavelength, not a long wavelength. Microwaves should have a high frequency and a short wavelength.
The mistake that Kamala made from the table is that Gamma rays should have a very high frequency, not a very low frequency.
The electromagnetic spectrum is what?The grouping of electromagnetic radiations in the electromagnetic spectrum is done according to diminishing or increasing frequency or wavelength.
The following are some examples of electromagnetic radiations depending on increasing wavelength:
Gamma raysX raysultrasound wavesobservable lightIR radiationMicrowaveswaves on radioHow do gamma rays work?These are the radiation waves produced by the radioactive disintegration of atomic nuclei.
These rays have high frequencies. The frequency happens 1019 times every second.
Learn more about electromagnetic radiation here: brainly.com/question/25847009
#SPJ4
Answer: gamma rays should have a very high frequency, not a very low frequency.
Explanation:
5 decades is what fraction of a century?
2. Consider a vector 10 units long at an angle of 120 degrees from the positive x axis. Find the x and y components of this vector.
Please help physics brain
x component = 10 Cos 120° = -5
y component = 10 Sin 120° = 5√3
What is a vector component?In vector algebra, vectors are added, subtracted, and multiplied using vector components. On diagrams, vectors are typically indicated by an arrow. The direction and magnitude of the vector are shown by the tip of the arrow and its length, respectively.
The use of vector components enables us to split a single vector quantity into two (or more) simpler scalar quantities. In vector algebra, vectors are added, subtracted, and multiplied using vector components.
Another method for locating vector components is to use the angle measured in the opposite direction from the +x axis. Then, the x-component will always be cosθ and the y-component will always be sinθ. Hence, the x component will be -5, and the y component will be 5√3.
Learn more about vector components, here:
https://brainly.com/question/29071527
#SPJ1
9. **A golfer can drive a ball with an initial speed of 30.0 m/s. If the tee and the green are separated by 80m, but on the same level, at what angle should the ball be driven (Hint: recall that 2cos(x)sin(x)=sin(2x))?
Answer:
Range formula:
R = V^2 sin 2θ / g
sin 2θ = R g / V^2 = 80 m * 9.80 m/s^2 / (30 m/s)^2 = .871
2θ = 60.6 deg
θ = 30.3 deg
Check: 30 * cos 30.3 = 25.9 m/s horizontal speed
t = 80 m / 25.9 m/s = 3.08 sec to reach target
H = Vy0 t - 1/2 g t^2
Vy0 = 30 * sin 30.3 = 15.1 m/s initial vertical speed
H = 15.1 * 3.08 - 4.9 * 3.08^2 = 46.5 - 46.5 = 0
Ball will be back at starting height after 3.08 s
Explain the properties of each type of circuit in terms of voltage, current and overall resistance. then explain which type of circuit would be better for most households and why. in your answer be sure to explain what happens in terms of voltage and current as components are added to a circuit (parallel and series) use complete sentences and proper scientific terminology
Answer: The difference in charge between two places is known as voltage. The passage of charge is measured as current. A material's propensity to oppose the passage of charge is known as resistance (current).
Explanation:
See Ohm's Law in which it describes the connection between current, voltage, and resistance. This asserts that, given the temperature is constant, the current flowing in a circuit is directly proportional to the applied voltage and inversely proportional to the circuit resistance. According to Ohm's Law, current is exactly proportional to voltage I = v/r).
Hope this helps:)
Select the correct answer. An object is dropped from a height of 25 meters. At what velocity will it hit the ground
Velocity with which the object hits the ground will be 22.3 m/sec.
Velocity is the rate of change of distance with respect to time.
It has the SI unit as m/sec.Also, the total displacement covered by any object per unit of time is known as velocity. It depends on the magnitude as well as the direction of the moving object.According to the third equation of motion, it relates final velocity with the initial velocity and acceleration
Mathematically, v² = u² + 2as
s = 25 m
a = g = acceleration due to gravity because the object is falling towards the ground = 9.8 m/sec²
u = initial velocity = 0 m/s
v = final velocity = which is to be calculated
v² = u² + 2as
v² = 0 + 2 x 10 x 25
v² = 500
v = [tex]\sqrt{500}\\[/tex]
v = 22.3 m/sec
Velocity of the object will be 22.3 m/sec when it will hit the ground.
To know more about Velocity,
https://brainly.com/question/29622619
#SPJ4
A race car travels at a speed of 95 m/s.
How far does it travel in 12.5 s?
Answer: 1200m
Explanation:
A 0.010 kg marble moving right at 3.0 m/s hits a 0.020 kg marble moving left at -3.0 m/s. If the larger marble continues to roll to the left at -1.0 m/s after the collision, what does the smaller marble take off at?
The velocity of the smaller marble after collision is -0.33 m/s.
What is velocity?Velocity is the rate of change of displacement.
To calculate the velocity of the smaller marble after collision, we use the formula below.
Formula:
V = [(m'v+mu)-mU]/(m+m')................. Equation 1Where:
V = Velocity of the smaller marble after collisionm = Mass of the bigger marblem' = Mass of the smaller marblev = Initial velocity of the smaller marbleu = Initial velocity of the bigger marbleU = Final velocity of the bigger marbleFrom the question,
Given:
m = 0.02 kgm' = 0.01 kgu = - 3 m/sv = 3 m/sU = -1 m/sSubstitute these values inton equation 1
V = [0.02(-3)+(0.01×3)-0.02(-1)](0.01+0.02)V = (-0.06+0.03+0.02)/0.03V = -0.01/0.03V = -0.33 m/sHence, the smaller marble take off at -0.33 m/s.
Learn more about velocity here: https://brainly.com/question/24445340
#SPJ1
If it takes 1998 to heat 150g of a substance from 25^oC to 55^oc what is the specific heat of substance
The specific heat capacity of the substance is 444 J/kg.°C.
What is specific heat capacity?The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (kg) of the material when its temperature increases 1 K (or 1 °C).
To calculate the specific heat capacity of the substance, we use the formula below
Formula:
c = q/mΔt...................... Equation 1Where:
c = Specific heat capacity q = Amount of heatm = MassΔt = Change in temperatureFrom the question,
Given:
q = 1998 Jm = 150 g = 0.15 kgΔt = 55-25 = 30°CSubstitute these values into equation 1
c = 1998/(0.15×30)c = 1998/4.5c = 444 J/kg.°CHence, the specific heat capacity is 444 J/kg.°C.
Learn more about specific heat capacity here: https://brainly.com/question/28825214
#SPJ1
What is the formula for calculating magnitude?
The formula for calculating magnitude is |v| =√(x2 + y2)
A vector formula's magnitude can be used to condense the numerical value of a particular vector. A vector has a magnitude and a direction. This magnitude of a vector formula provides a summary of the individual vector measurements along the x, y, and z axes. The symbol for it is |v|.
|v| =(x2 + y2) is the formula to calculate the magnitude of a vector (in two dimensions) v = (x, y). The Pythagorean theorem serves as the basis for this formula.
|V| = (x2 + y2 + z2) is the formula to calculate the magnitude of a vector (in three-dimensional space) V = (x, y, z).
You can also learn about magnitude from the following question:
brainly.com/question/14452091
#SPJ4
Three objects with a mass of M exert gravitation forces on each other. What is the direction of the net force on mass B? Explain your reasoning.
When three objects with a mass of M exert gravitation forces on each other, the direction of the net force on mass B will vary according to position of three masses.
What is gravitation?
The force of attraction between any two bodies is known as gravitation. There is an attraction between every thing in the cosmos, but most of the time it is too faint to be noticed due to the extreme distance between the objects.
Along the line connecting the centers of the two bodies, the gravitational force acts. Hence, the direction of the net force on mass B will vary according to position of three masses.
Learn more about gravitational force here:
https://brainly.com/question/24783651
#SPJ1
50 points and brainliest!
In autoimmune disorders, such as lupus, the immune systems cannot tell the difference between foreign substances and its own cells. Health officials estimate that over five million people have been diagnosed with lupus worldwide
OBJECTIVES
Learn about lupus.
Write a four-paragraph (400 word) report on what you have learned.
Directions
Use the library and other reference materials to research lupus. Then, write a 400 word report on what you have learned. Be sure to include symptoms, causes, and treatments.
Lupus is a kind of disease in which the bodies immune system attacks its own cells.
What is the immune system?We know that the immune system is the system that is in the body that is able to fight off the invaders that come into the body. As such, the immune system is the system that attacks any disease causing organism that comes into the body.
We know that foreign cells can be able to cause diseases in the body and they can be able to affect the balance of the cells that are in the body. Now, we can see that there are some circumstances in which the cells of the body begins to fight themselves.
This implies that the immune system of the body sees its own cells as the enemies and then begins to attack them and as such the person that has this condition is said to have an auto immune disorder.
Learn more about immune system:https://brainly.com/question/19843453
#SPJ1
The wind on which planet can blow up to 1,500 miles per hour?
The wind on Jupiter planet can blow up to 1,500 miles per hour.
What is planet?A planet is a large celestial body that orbits a star, usually a sun, and has its own gravity. Planets are classified by size, composition, and distance from the star. They are made up of rock, metal, or gas and can contain an atmosphere. Planets can have satellites, or moons, which orbit them. They can also have asteroids, comets, and other objects around them. Some planets have rings, like Saturn, and some have many moons, like Jupiter. Planets are fascinating to study and explore.
To learn more about planet
https://brainly.com/question/27938451
#SPJ4
A 6-kg bowling ball sits on top of a building that is 120 meters tall.
Circle one: KE / GPE / both
Show your work for finding the values of each type of energy the object has:
The gravitational potential energy of the bowling ball is 7,056 J.
What is the gravitational potential energy of the bowling ball?The gravitational potential energy of the bowling ball is calculated by applying the following formula;
P.E = mgh
where;
m is the mass of the bowling ballh is the height of fall of the bowlingg is acceleration due to gravityP.E = ( 6kg x 9.8 m/s² x 120 m )
P.E = 7,056 J
Thus, the gravitational potential energy of the bowling ball is the energy possessed by the ball due to its height above the ground level.
Learn more about potential energy here: https://brainly.com/question/1242059
#SPJ1
What are the main disadvantages for alternative energy sources solar biomass wind geothermal and hydropower )?
Disadvantages of renewable energy
Renewable energy has many benefits, but it’s not always sunny when it comes to renewable energy. Here are some cons of renewable energy when compared to traditional fuel sources:
Renewable energy has high upfront costs Renewable energy is intermittent Renewables have storage capabilities Renewable energy sources have geographic limitations Renewables aren’t always 100% carbon-freeRenewable energy typesThe increasing use of energy sources makes people to find other options than the current energy sources. The types of renewable energy are as follows.
SolarThis type of energy comes from the process of capturing solar radiation or sunlight, then converting it into electricity, heat, or hot water. To get electricity, the sun's heat will be absorbed using solar panels (solar panels) and then convert it into electricity.
Wind energyWind is moving air. Wind has long been used as a source of energy. For example in the Netherlands, the wind is used to drive a pinwheel. This kincie serves as a source of grain processing equipment. Currently, electricity is also able to generate electricity by utilizing turbines. This turbine is used to drive a generator that generates electricity.
Tidal energyThis energy is obtained from the results of the tides. It is known, this type of energy is also used on the east coast of America and Europe. The turbines installed on the waterfront help convert energy from the tides into mechanical energy to grind grain.
Wave EnergyThis type of energy is used to generate electricity. It's just that developing wave energy requires infrastructure with a relatively high cost.
Ocean thermal energySea water has a temperature difference where the inside of the sea water feels cold and the surface of the sea water feels hot because it is exposed to sunlight. This temperature difference is used to generate electrical energy using advanced technology.
Learn more about renewable energy at https://brainly.com/question/17373437.
#SPJ4
pls help I need the answer
Answer:
You need to plug in the values
(C) 100(-1/2)^0 = 100
100(-1/2) = -50
100(-1/2)^2 = -25
100(-1/2)^3 = 100 * -1/8 = -12.5